Transverse profile for 70 GeV < pT < 100 GeV.

Longitudinal profile for pT > 100 GeV.

Transverse profile for pT > 100 GeV.

Average longitudinal profile

Transverse profile for pT > 100 GeV.

Post-fit $m_\text{T}(\gamma, E_\text{T}^\text{miss})$ distribution in the inclusive signal region for the dark-photon search with the 125 GeV mass $\mathcal{B}(H \to \gamma \gamma_\text{d})$ signal normalization set to zero. A $H \to \gamma \gamma_\text{d}$ decay signal is shown for two different mass hypotheses, 125 GeV and 500 GeV, and scaled to a $\mathcal{B}(H \to \gamma \gamma_\text{d})$ of 2% and 1%, respectively. Events with $m_\text{T}(\gamma, E_\text{T}^\text{miss})$ larger than the rightmost bin boundary are added to that bin.

The 95% CL upper limit on the Higgs boson production cross-section times branching ratio to $\gamma \gamma_\text{d}$ is shown for different VBF-produced scalar-mediator-mass hypotheses in the NWA. The theoretically predicted cross-section of a Higgs boson produced via VBF and with the $\mathcal{B}(H \to \gamma \gamma_\text{d}) =$ 5% is superimposed on the $\pm 1\sigma$ and $\pm 2\sigma$ NNLO QCD + NLO EW uncertainty band of the expected production cross-section limit.

Post-fit $m_\text{jj}$ distribution in the inclusive signal region. The Higgs boson invisible decay signal is scaled to a $\mathcal{B}_\text{inv}$ of 37%. Events with $m_\text{jj}$ larger than the rightmost bin boundary are added to that bin.

Post-fit $m_\text{jj}$ distribution in the one-lepton control region $W_{\ell \nu}^\gamma$ CR. Events with $m_\text{jj}$ larger than the rightmost bin boundary are added to that bin.

Post-fit $m_\text{T}$ distribution in the one lepton control region. Events with $m_\text{T}$ larger than the rightmost bin boundary are added to that bin.

Post-fit photon centrality distribution in the zero lepton signal plus control region with the $\mathcal{B}_\text{inv}$ signal normalization set to zero in the fit.

Post-fit photon $E_\text{T}$ distribution in the zero lepton signal region with the $\mathcal{B}_\text{inv}$ signal normalization set to zero in the fit.

Post-fit photon centrality distribution in the zero lepton signal plus control region resulting from the fit to the $m_\text{jj}$ distribution for EW $Z \gamma + \text{jets}$. The post-fit uncertainties include statistical, experimental, and theory contributions.

Post-fit photon $E_\text{T}$ distribution in the zero lepton signal region resulting from the fit to the $m_\text{jj}$ distribution for EW $Z \gamma + \text{jets}$. The post-fit uncertainties include statistical, experimental, and theory contributions.

Post-fit DNN output score distribution in the one lepton control region.

Yields for the EW $Z \gamma + \text{jets}$ process are shown after each selection along with relative and absolute signal acceptance efficiencies.

Yields for the 125 GeV Higgs boson with $\mathcal{B}_\text{inv.} =$ 1 signal produced by the vector boson fusion process in association with a final state photon are shown after each selection along with relative and absolute signal acceptance efficiencies.

Yields for the 125 GeV Higgs boson with $\mathcal{B}(H \to \gamma \gamma_\text{d}) =$ 1 signal produced by the vector boson fusion process are shown after each selection along with relative and absolute signal acceptance efficiencies.

Upper limits on $\mathcal{B}(H\rightarrow aa\rightarrow bb\mu\mu)$ at 95% CL including the BDT cut as a function of the signal mass.

Upper limits on $\mathcal{B}(H\rightarrow aa\rightarrow bb\mu\mu)$ at 95% CL without the BDT cut as a function of the signal mass.

The number of events when applying each cut in the analysis for $m_a$ = 16 GeV. The first row shows the approximate total number of events scaled to the theoretical signal cross-section and luminosity of the full Run 2 dataset, assuming $ \mathcal{B}(H\rightarrow aa\rightarrow bb\mu\mu)$ = 0.16%.

The number of events when applying each cut in the analysis for $m_a$ = 20 GeV. The first row shows the approximate total number of events scaled to the theoretical signal cross-section and luminosity of the full Run 2 dataset, assuming $ \mathcal{B}(H\rightarrow aa\rightarrow bb\mu\mu)$ = 0.16%.

The number of events when applying each cut in the analysis for $m_a$ = 30 GeV. The first row shows the approximate total number of events scaled to the theoretical signal cross-section and luminosity of the full Run 2 dataset, assuming $ \mathcal{B}(H\rightarrow aa\rightarrow bb\mu\mu)$ = 0.16%.

The number of events when applying each cut in the analysis for $m_a$ = 40 GeV. The first row shows the approximate total number of events scaled to the theoretical signal cross-section and luminosity of the full Run 2 dataset, assuming $ \mathcal{B}(H\rightarrow aa\rightarrow bb\mu\mu)$ = 0.16%.

The number of events when applying each cut in the analysis for $m_a$ = 50 GeV. The first row shows the approximate total number of events scaled to the theoretical signal cross-section and luminosity of the full Run 2 dataset, assuming $ \mathcal{B}(H\rightarrow aa\rightarrow bb\mu\mu)$ = 0.16%.

The number of events when applying each cut in the analysis for $m_a$ = 60 GeV. The first row shows the approximate total number of events scaled to the theoretical signal cross-section and luminosity of the full Run 2 dataset, assuming $ \mathcal{B}(H\rightarrow aa\rightarrow bb\mu\mu)$ = 0.16%.

IRing2 for HT2>=500 GeV, NJets>=5

IRing2 for HT2>=1000 GeV, NJets>=2

IRing2 for HT2>=1000 GeV, NJets>=3

IRing2 for HT2>=1000 GeV, NJets>=4

IRing2 for HT2>=1000 GeV, NJets>=5

IRing2 for HT2>=1500 GeV, NJets>=2

IRing2 for HT2>=1500 GeV, NJets>=3

IRing2 for HT2>=1500 GeV, NJets>=4

IRing2 for HT2>=1500 GeV, NJets>=5

IRing128 for HT2>=500 GeV, NJets>=2

IRing128 for HT2>=500 GeV, NJets>=3

IRing128 for HT2>=500 GeV, NJets>=4

IRing128 for HT2>=500 GeV, NJets>=5

IRing128 for HT2>=1000 GeV, NJets>=2

IRing128 for HT2>=1000 GeV, NJets>=3

IRing128 for HT2>=1000 GeV, NJets>=4

IRing128 for HT2>=1000 GeV, NJets>=5

IRing128 for HT2>=1500 GeV, NJets>=2

IRing128 for HT2>=1500 GeV, NJets>=3

IRing128 for HT2>=1500 GeV, NJets>=4

IRing128 for HT2>=1500 GeV, NJets>=5

ICyl16 for HT2>=500 GeV, NJets>=2

ICyl16 for HT2>=500 GeV, NJets>=3

ICyl16 for HT2>=500 GeV, NJets>=4

ICyl16 for HT2>=500 GeV, NJets>=5

ICyl16 for HT2>=1000 GeV, NJets>=2

ICyl16 for HT2>=1000 GeV, NJets>=3

ICyl16 for HT2>=1000 GeV, NJets>=4

ICyl16 for HT2>=1000 GeV, NJets>=5

ICyl16 for HT2>=1500 GeV, NJets>=2

ICyl16 for HT2>=1500 GeV, NJets>=3

ICyl16 for HT2>=1500 GeV, NJets>=4

ICyl16 for HT2>=1500 GeV, NJets>=5

IRing2 covariance for HT2>=500 GeV, NJets>=2 (Table 1)

IRing2 covariance for HT2>=500 GeV, NJets>=3 (Table 2)

IRing2 covariance for HT2>=500 GeV, NJets>=4 (Table 3)

IRing2 covariance for HT2>=500 GeV, NJets>=5 (Table 4)

IRing2 covariance for HT2>=1000 GeV, NJets>=2 (Table 5)

IRing2 covariance for HT2>=1000 GeV, NJets>=3 (Table 6)

IRing2 covariance for HT2>=1000 GeV, NJets>=4 (Table 7)

IRing2 covariance for HT2>=1000 GeV, NJets>=5 (Table 8)

IRing2 covariance for HT2>=1500 GeV, NJets>=2 (Table 9)

IRing2 covariance for HT2>=1500 GeV, NJets>=3 (Table 10)

IRing2 covariance for HT2>=1500 GeV, NJets>=4 (Table 11)

IRing2 covariance for HT2>=1500 GeV, NJets>=5 (Table 12)

IRing128 covariance for HT2>=500 GeV, NJets>=2 (Table 13)

IRing128 covariance for HT2>=500 GeV, NJets>=3 (Table 14)

IRing128 covariance for HT2>=500 GeV, NJets>=4 (Table 15)

IRing128 covariance for HT2>=500 GeV, NJets>=5 (Table 16)

IRing128 covariance for HT2>=1000 GeV, NJets>=2 (Table 17)

IRing128 covariance for HT2>=1000 GeV, NJets>=3 (Table 18)

IRing128 covariance for HT2>=1000 GeV, NJets>=4 (Table 19)

IRing128 covariance for HT2>=1000 GeV, NJets>=5 (Table 20)

IRing128 covariance for HT2>=1500 GeV, NJets>=2 (Table 21)

IRing128 covariance for HT2>=1500 GeV, NJets>=3 (Table 22)

IRing128 covariance for HT2>=1500 GeV, NJets>=4 (Table 23)

IRing128 covariance for HT2>=1500 GeV, NJets>=5 (Table 24)

ICyl16 covariance for HT2>=500 GeV, NJets>=2 (Table 25)

ICyl16 covariance for HT2>=500 GeV, NJets>=3 (Table 26)

ICyl16 covariance for HT2>=500 GeV, NJets>=4 (Table 27)

ICyl16 covariance for HT2>=500 GeV, NJets>=5 (Table 28)

ICyl16 covariance for HT2>=1000 GeV, NJets>=2 (Table 29)

ICyl16 covariance for HT2>=1000 GeV, NJets>=3 (Table 30)

ICyl16 covariance for HT2>=1000 GeV, NJets>=4 (Table 31)

ICyl16 covariance for HT2>=1000 GeV, NJets>=5 (Table 32)

ICyl16 covariance for HT2>=1500 GeV, NJets>=2 (Table 33)

ICyl16 covariance for HT2>=1500 GeV, NJets>=3 (Table 34)

ICyl16 covariance for HT2>=1500 GeV, NJets>=4 (Table 35)

ICyl16 covariance for HT2>=1500 GeV, NJets>=5 (Table 36)

IRing2 covariance, complete

1-IRing128 covariance, complete

1-ICyl16 covariance, complete

Differential cross section as a function of $m_{\gamma\gamma}$. The table contains the values measured in data and theory predictions from SHERPA, DIPHOX and NNLOJET.

Differential cross section as a function of $p_{T,\gamma\gamma}$. The table contains the values measured in data and theory predictions from SHERPA, DIPHOX and NNLOJET.

Differential cross section as a function of $a_{T,\gamma\gamma}$. The table contains the values measured in data and theory predictions from SHERPA, DIPHOX and NNLOJET.

Differential cross section as a function of $\phi_{\eta}*$. The table contains the values measured in data and theory predictions from SHERPA, DIPHOX and NNLOJET.

Differential cross section as a function of $\pi-\Delta\phi_{\gamma\gamma}$. The table contains the values measured in data and theory predictions from SHERPA, DIPHOX and NNLOJET.

Differential cross section as a function of $|cos\theta*|^{(CS)}$. The table contains the values measured in data and theory predictions from SHERPA, DIPHOX and NNLOJET.

The contribution from different systematic uncertainties to the measured $t\bar{t}t\bar{t}$ production cross section, grouped in categories.

The results of the fitted signal strength $\mu$ in the 1L/2LOS and 2LSS/3L combined channel.

The results of fitted inclusive ${t\bar{t}t\bar{t}}$ cross-section in the 1L/2LOS and 2LSS/3L combined channel.

Comparison between data and prediction for the distribution of the sum of the pseudo-continuous b-tagging score over the six jets with the highest score in the 1L,$\geq$9j,$\geq$3b region before the fit.

Comparison between data and prediction for the distribution of the sum of the pseudo-continuous b-tagging score over the six jets with the highest score in the 1L,$\geq$9j,$\geq$3b region after the fit.

Comparison between data and prediction for the distribution of the sum of the pseudo-continuous b-tagging score over the six jets with the highest score in the 2LOS,$\geq$7j,$\geq$3b region before the fit.

Comparison between data and prediction for the distribution of the sum of the pseudo-continuous b-tagging score over the six jets with the highest score in the 2LOS,$\geq$7j,$\geq$3b region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,$\geq$8j,$\geq$3b region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,$\geq$8j,$\geq$3b region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,$\geq$6j,$\geq$3b region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,$\geq$6j,$\geq$3b region after the fit.

Comparison between data and prediction for the distribution of number of jets in the 1L,$\geq$8j,$\geq$3b region before the fit.

Comparison between data and prediction for the distribution of number of jets in the 1L,$\geq$8j,$\geq$3b region after the fit.

Comparison between data and prediction for the distribution of number of jets in the 2LOS,$\geq$6j,$\geq$3b region before the fit.

Comparison between data and prediction for the distribution of number of jets in the 2LOS,$\geq$6j,$\geq$3b region after the fit.

Comparison between data and prediction for the distribution of b-jets multiplicity in the 1L,$\geq$8j,$\geq$3b region before the fit.

Comparison between data and prediction for the distribution of b-jets multiplicity in the 1L,$\geq$8j,$\geq$3b region after the fit.

Comparison between data and prediction for the distribution of b-jets multiplicity in the 2LOS,$\geq$6j,$\geq$3b region before the fit.

Comparison between data and prediction for the distribution of b-jets multiplicity in the 2LOS,$\geq$6j,$\geq$3b region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,9j,4b signal region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,9j,4b signal region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,9j,$\geq$5b signal region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,9j,$\geq$5b signal region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,3bL signal region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,3bL signal region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,3bH signal region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,3bH signal region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,4b signal region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,4b signal region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,$\geq$5b signal region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,$\geq$5b signal region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 2LOS,7j,$\geq$4b signal region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 2LOS,7j,$\geq$4b signal region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,3bL signal region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,3bL signal region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,3bH signal region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,3bH signal region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,$\geq$4b signal region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,$\geq$4b signal region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,3bV validation region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,3bV validation region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,9j,3bV validation region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,9j,3bV validation region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,3bV validation region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,3bV validation region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,3bV validation region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,3bV validation region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 2LOS,7j,3bV validation region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 2LOS,7j,3bV validation region after the fit.

Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,3bV validation region before the fit.

Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,3bV validation region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,3bL control region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,3bL control region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,3bH control region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,3bH control region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,9j,3bL control region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,9j,3bL control region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,9j,3bH control region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,9j,3bH control region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,4b control region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,4b control region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,$\geq$5b control region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,$\geq$5b control region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,3bL control region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,3bL control region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,3bH control region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,3bH control region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,7j,3bL control region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,7j,3bL control region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,7j,3bH control region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,7j,3bH control region after the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,$\geq$4b control region before the fit.

Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,$\geq$4b control region after the fit.

Distribution of $m_{\mathrm{T},3l}$ in the JNLow SR after the background-only fit. The uncertainty on the expected number of background events includes all statistical and systematic post-fit uncertainties with the correlations between various background sources taken into account.

Distribution of $H_\text{T} + E_\text{T}^\text{miss}$ in the Q0 SR after the background-only fit. The uncertainty on the expected number of background events includes all statistical and systematic post-fit uncertainties with the correlations between various background sources taken into account.

Distribution of $H_\text{T} + E_\text{T}^\text{miss}$ in the Q2 SR after the background-only fit. The uncertainty on the expected number of background events includes all statistical and systematic post-fit uncertainties with the correlations between various background sources taken into account.

Distribution of $m_{\mathrm{T},3l}$ in the ZL-CR after the background-only fit.

Distribution of $m_{\mathrm{T},3l}$ in the Fake-CR after the background-only fit.

Distribution of $H_\text{T} + E_\text{T}^\text{miss}$ in the Q0 DB-CR after the background-only fit.

Distribution of $H_\text{T} + E_\text{T}^\text{miss}$ in the Q0 RT-CR after the background-only fit.

Expected and observed exclusion limit for the combination of the two- (from Ref. EXOT-2018-33), three- and four-lepton channels, for the type-III seesaw process with the corresponding one- and two-standard-deviation uncertainty bands, showing the 95% CL upper limit on the cross-section.

Expected and observed 95% ( $CL_s$ ) exclusion limits in the three lepton channel for the type-III seesaw process with the corresponding one- and two-standard-deviation bands, showing the 95% CL upper limit on the cross-section.

Expected and observed 95% ( $CL_s$ ) exclusion limits in the four lepton channel for the type-III seesaw process with the corresponding one- and two-standard-deviation bands, showing the 95% CL upper limit on the cross-section.

Cross-sections of signal Monte Carlo samples for each mass point considered in this analysis. Leading order cross-sections ( $\sigma_{LO}$ ) are computed by the generator and then rescaled to next-to-leading cross-sections ( $\sigma_{NLO+NLL}$ ), with their corresponding uncertainties, using information taken from Refs. C1C1 and N2C1.

Expected signal and background yields after each of the analysis selection cuts for the 800 GeV mass hypothesis in the ZL SR. Preselection represents events with at least three leptons.

Expected signal and background yields after each of the analysis selection cuts for the 800 GeV mass hypothesis in the ZLVeto SR. Preselection represents events with at least three leptons.

Expected signal and background yields after each of the analysis selection cuts for the 800 GeV mass hypothesis in the JNLow SR. Preselection represents events with at least three leptons.

Expected signal and background yields after each of the analysis selection cuts for the 800 GeV mass hypothesis in the Q0 SR. Preselection represents events with at least three leptons.

Expected signal and background yields after each of the analysis selection cuts for the 800 GeV mass hypothesis in the Q2 SR. Preselection represents events with at least three leptons.

Expected signal and background yields after each of the analysis selection cuts for the 800 GeV mass hypothesis in the ZL CR. Preselection represents events with at least three leptons.

Expected signal and background yields after each of the analysis selection cuts for the 800 GeV mass hypothesis in the Q0-DB CR. Preselection represents events with at least three leptons.

Expected signal and background yields after each of the analysis selection cuts for the 800 GeV mass hypothesis in the Q0-RT CR. Preselection represents events with at least three leptons.

Expected background yields and observed data after the background-only fit, in the three-lepton CRs and VRs.

Expected background yields and observed data after the background-only fit, in the four-lepton CRs and VRs.

Expected and observed 95% ( $CL_s$ ) exclusion limits in the three and four lepton channels for the type-III seesaw process with the corresponding one- and two-standard-deviation bands, showing the 95% CL upper limit on the cross-section.

Distributions of $s_{\text{T}}$ in the single-tau one-bin SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.

Distributions of $m_{\text{T}}(\tau)$ in the single-tau one-bin SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.

Distributions of $\Sigma m_{\text{T}}(b_{1,2})$ in the single-tau $p_{\text{T}}(\tau)$-binned SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.

Distributions of $p_{\text{T}}(\tau)$ in the single-tau $p_{\text{T}}(\tau)$-binned SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.

Observed event yields in data ('Observed') and expected event yields for SM background processes obtained from the background-only fit ('Total bkg.' and rows below) in the signal regions of the di-tau and single-tau channels. The quoted uncertainties include both the statistical and systematic uncertainties and are truncated at zero yield. By construction, no $t\bar{t}$ (2 real $\tau$) events can pass the selections in the single-tau channel. As the individual uncertainties are correlated, they do not add in quadrature to equal the total background uncertainty.

From left to right: upper limits at the 95% confidence level (CL) on the visible cross section ($\sigma_\text{vis}$) and on the number of signal events ($S_{\text{obs}}^{95}$). The third column ($S_{\text{exp}}^{95}$) shows the upper limit at the 95% CL on the number of signal events, given the expected number (and $\pm 1\,\sigma$ excursions on the expectation) of background events. The last two columns indicate the confidence level observed for the background-only hypothesis ($\text{CL}_{b}$), the discovery $p$-value ($p(s=0)$) and the significance ($Z$). In the di-tau SR, where fewer events are observed than predicted by the fitted background estimate, the $p$-value is capped at 0.5.

Expected and observed exclusion contours at the 95% confidence level for the vector third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{v}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ into a quark and a charged lepton. The plot shows the exclusion contour for the minimal-coupling scenario. The limits are derived from the binned single-tau signal region.

Expected and observed exclusion contours at the 95% confidence level for the vector third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{v}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ into a quark and a charged lepton. The plot shows the exclusion contour for the minimal-coupling scenario. The limits are derived from the binned single-tau signal region.

Expected and observed exclusion contours at the 95% confidence level for the vector third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{v}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ into a quark and a charged lepton. The plot shows the exclusion contour for vector leptoquarks with additional gauge couplings. The limits are derived from the binned single-tau signal region.

Expected and observed exclusion contours at the 95% confidence level for the vector third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{v}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ into a quark and a charged lepton. The plot shows the exclusion contour for vector leptoquarks with additional gauge couplings. The limits are derived from the binned single-tau signal region.

Exclusion contours at the 95% confidence level for the stop-stau signal model as a function of the masses of the top squark $m(\tilde{t}_{1})$ and of the tau slepton $m(\tilde{\tau}_{1})$. Expected and observed limits are shown for the present search in comparison to observed limits from previous ATLAS analyses based on data from Run-1 of the LHC at $\sqrt{s} = 8$ TeV [Eur. Phys. J. C 76 (2016)] and on a partial dataset from Run 2 at $\sqrt{s} = 13$ TeV [Phys. Rev. D 98 (2018) 032008]. The green band indicates the limit on the mass of the tau slepton (for a massless LSP) from the LEP experiments.

Exclusion contours at the 95% confidence level for the stop-stau signal model as a function of the masses of the top squark $m(\tilde{t}_{1})$ and of the tau slepton $m(\tilde{\tau}_{1})$. Expected and observed limits are shown for the present search in comparison to observed limits from previous ATLAS analyses based on data from Run-1 of the LHC at $\sqrt{s} = 8$ TeV [Eur. Phys. J. C 76 (2016)] and on a partial dataset from Run 2 at $\sqrt{s} = 13$ TeV [Phys. Rev. D 98 (2018) 032008]. The green band indicates the limit on the mass of the tau slepton (for a massless LSP) from the LEP experiments.

Expected and observed exclusion contours at the 95% confidence level for the scalar third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{u}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow q\ell)$ into a quark and a charged lepton. The plot shows the exclusion contour for up-type leptoquarks $\text{LQ}_{3}^{\text{u}})$ with charge $+2/3e$. The limits are derived from the binned single-tau signal region. Shown in gray for comparison are the observed exclusion-limit contours from the previous ATLAS publication that targets the same leptoquark models but is based on a subset of the Run-2 data [JHEP 06 (2019) 144]. In this previous publication five different analyses are considered that target not only the final state studied here but also the final states that correspond to a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow q\ell)$ of 0 or 1, leading to the concave shapes of the gray exclusion contours.

Expected and observed exclusion contours at the 95% confidence level for the scalar third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{u}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow q\ell)$ into a quark and a charged lepton. The plot shows the exclusion contour for up-type leptoquarks $\text{LQ}_{3}^{\text{u}})$ with charge $+2/3e$. The limits are derived from the binned single-tau signal region. Shown in gray for comparison are the observed exclusion-limit contours from the previous ATLAS publication that targets the same leptoquark models but is based on a subset of the Run-2 data [JHEP 06 (2019) 144]. In this previous publication five different analyses are considered that target not only the final state studied here but also the final states that correspond to a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow q\ell)$ of 0 or 1, leading to the concave shapes of the gray exclusion contours.

Expected and observed exclusion contours at the 95% confidence level for the scalar third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{d}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow q\ell)$ into a quark and a charged lepton. The plot shows the exclusion contour for down-type leptoquarks $\text{LQ}_{3}^{\text{d}})$ with charge $-1/3e$. The limits are derived from the binned single-tau signal region. Shown in gray for comparison are the observed exclusion-limit contours from the previous ATLAS publication that targets the same leptoquark models but is based on a subset of the Run-2 data [JHEP 06 (2019) 144]. In this previous publication five different analyses are considered that target not only the final state studied here but also the final states that correspond to a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow q\ell)$ of 0 or 1, leading to the concave shapes of the gray exclusion contours.

Expected and observed exclusion contours at the 95% confidence level for the scalar third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{d}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow q\ell)$ into a quark and a charged lepton. The plot shows the exclusion contour for down-type leptoquarks $\text{LQ}_{3}^{\text{d}})$ with charge $-1/3e$. The limits are derived from the binned single-tau signal region. Shown in gray for comparison are the observed exclusion-limit contours from the previous ATLAS publication that targets the same leptoquark models but is based on a subset of the Run-2 data [JHEP 06 (2019) 144]. In this previous publication five different analyses are considered that target not only the final state studied here but also the final states that correspond to a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow q\ell)$ of 0 or 1, leading to the concave shapes of the gray exclusion contours.

Upper limits on the signal cross section at the 95 % confidence level for the stop-stau signal model.

Upper limits on the signal cross section at the 95 % confidence level for the scalar third-generation leptoquark signal model with up-type leptoquarks.

Upper limits on the signal cross section at the 95 % confidence level for the scalar third-generation leptoquark signal model with down-type leptoquarks.

Upper limits on the signal cross section at the 95 % confidence level for the vector third-generation leptoquark signal model with minimal coupling (MC).

Upper limits on the signal cross section at the 95 % confidence level for the vector third-generation leptoquark signal model with additional gauge couplings (YM).

Acceptance of the one-bin signal region of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.

Efficiency of the one-bin signal region of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.

Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.

Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.

Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the signal region of the di-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.

Efficiency of the signal region of the di-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the one-bin signal region of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.

Efficiency of the one-bin signal region of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.

Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.

Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.

Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the signal region of the di-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.

Efficiency of the signal region of the di-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the one-bin signal region of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.

Efficiency of the one-bin signal region of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.

Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.

Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.

Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the signal region of the di-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.

Efficiency of the signal region of the di-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the one-bin signal region of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.

Efficiency of the one-bin signal region of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.

Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.

Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.

Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the signal region of the di-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.

Efficiency of the signal region of the di-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the one-bin signal region of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Efficiency of the one-bin signal region of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Acceptance of the signal region of the di-tau channel for pair production of top squarks with decays via tau sleptons.

Efficiency of the signal region of the di-tau channel for pair production of top squarks with decays via tau sleptons.

Cutflow for the benchmark signal model $m(\tilde{t}_{1}) = 1350$ GeV, $m(\tilde{\tau}_{1}) = 1090$ GeV for the di-tau SR. The simulated sample contains 30,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.

Cutflow for the benchmark signal model $m(\tilde{t}_{1}) = 1350$ GeV, $m(\tilde{\tau}_{1}) = 1090$ GeV for the single-tau one-bin SR. The simulated sample contains 30,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\tilde{t}_{1}) = 1350$ GeV, $m(\tilde{\tau}_{1}) = 1090$ GeV for the single-tau multi-bin SR. The simulated sample contains 30,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{u}}) = 1.2$ TeV, $\beta = 0.5$ for the di-tau SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{u}}) = 1.2$ TeV, $\beta = 0.5$ for the single-tau one-bin SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{u}}) = 1.2$ TeV, $\beta = 0.5$ for the single-tau multi-bin SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{d}}) = 1.2$ TeV, $\beta = 0.5$ for the di-tau SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{d}}) = 1.2$ TeV, $\beta = 0.5$ for the single-tau one-bin SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{d}}) = 1.2$ TeV, $\beta = 0.5$ for the single-tau multi-bin SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the minimal-coupling scenario for the di-tau SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the minimal-coupling scenario for the single-tau one-bin SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the minimal-coupling scenario for the single-tau multi-bin SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the Yang--Mills scenario for the di-tau SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the Yang--Mills scenario for the single-tau one-bin SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the Yang--Mills scenario for the single-tau multi-bin SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Distribution of the missing transverse energy in CRTop. The Z+HF and $t\bar{t}$ scale factors, described in the text, have been applied to the simulated samples. The distribution labeled "Signal" is for the model with ($m_a$, $m_{\tilde{\chi}_{1}^{0}}$, $m_{\tilde{\chi}_{2}^{0}}$) = (45 GeV, 10 GeV, 80 GeV).

Distribution of the dijet invariant mass in the signal region, shown together with the parameterized background model (labelled "Bkg Model"). For reference, the MC prediction for the SM background is also shown (labelled "SM MC"). The Z+HF and $t\bar{t}$ scale factors, described in the text, have been applied to the simulated samples. The signal region is defined to have dijet invariant mass > 20 GeV. The distribution labeled "Signal" is for the model with ($m_a$, $m_{\tilde{\chi}_{1}^{0}}$, $m_{\tilde{\chi}_{2}^{0}}$) = (45 GeV, 10 GeV, 80 GeV).

Upper limits at 95% CL on the $pp \rightarrow ZH$ cross section times the branching ratio for $Z \rightarrow \ell^{+}\ell^{-}$ (where $\ell = e, \mu \;\mathrm{or}\; \tau$) and $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ as a function of $m_{a}$ for $m_{\tilde{\chi}_{1}^{0}} = 10$ GeV and $m_{\tilde{\chi}_{2}^{0}} = 65$ GeV in the NMSSM scenario described in the text. All branching ratios in the Higgs boson decay chain after the decay $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0}$ are set to 100%.

Upper limits at 95% CL on the $pp \rightarrow ZH$ cross section times the branching ratio for $Z \rightarrow \ell^{+}\ell^{-}$ (where $\ell = e, \mu \;\mathrm{or}\; \tau$) and $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ as a function of $m_{a}$ for $m_{\tilde{\chi}_{1}^{0}} = 10$ GeV and $m_{\tilde{\chi}_{2}^{0}} = 80$ GeV in the NMSSM scenario described in the text. All branching ratios in the Higgs boson decay chain after the decay $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0}$ are set to 100%.

Upper limits at 95% CL on the $pp \rightarrow ZH$ cross section times the branching ratio for $Z \rightarrow \ell^{+}\ell^{-}$ (where $\ell = e, \mu\; \mathrm{or}\; \tau$) and $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ as a function of $m_{a}$ for $m_{\tilde{\chi}_{1}^{0}} = 10$ GeV and $m_{\tilde{\chi}_{2}^{0}} = 95$ GeV in the NMSSM scenario described in the text. All branching ratios in the Higgs boson decay chain after the decay $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0}$ are set to 100%.

Upper limits at 95% CL on the $pp \rightarrow ZH$ cross section times the branching ratio for $Z \rightarrow \ell^{+}\ell^{-}$ (where $\ell = e, \mu\; \mathrm{or}\; \tau$) and $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ as a function of $m_{a}$ for $m_{\tilde{\chi}_{1}^{0}} = 10$ GeV and $m_{\tilde{\chi}_{2}^{0}} = 110$ GeV in the NMSSM scenario described in the text. All branching ratios in the Higgs boson decay chain after the decay $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0}$ are set to 100%.

Upper limits at 95% CL on the $pp \rightarrow ZH$ cross section times the branching ratio for $Z \rightarrow \ell^{+}\ell^{-}$ (where $\ell = e, \mu\; \mathrm{or}\; \tau$) and $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ as a function of $m_{a}$ for $m_{\tilde{\chi}_{1}^{0}} = 20$ GeV and $m_{\tilde{\chi}_{2}^{0}} = 80$ GeV in the NMSSM scenario described in the text. All branching ratios in the Higgs boson decay chain after the decay $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0}$ are set to 100%.

Upper limits at 95% CL on the $pp \rightarrow ZH$ cross section times the branching ratio for $Z \rightarrow \ell^{+}\ell^{-}$ (where $\ell = e, \mu \;\mathrm{or}\; \tau$) and $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ as a function of $m_{a}$ for $m_{\tilde{\chi}_{1}^{0}} = 30$ GeV and $m_{\tilde{\chi}_{2}^{0}} = 80$ GeV in the NMSSM scenario described in the text. All branching ratios in the Higgs boson decay chain after the decay $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0}$ are set to 100%.

Upper limits at 95% CL on the branching ratio $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ as a function of $m_{a}$ for $m_{\tilde{\chi}_{1}^{0}} = 10$ GeV and $m_{\tilde{\chi}_{2}^{0}} = 65$ GeV in the NMSSM scenario described in the text. The SM $ZH$ cross section is assumed.

Upper limits at 95% CL on the branching ratio $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ as a function of $m_{a}$ for $m_{\tilde{\chi}_{1}^{0}} = 10$ GeV and $m_{\tilde{\chi}_{2}^{0}} = 80$ GeV in the NMSSM scenario described in the text. The SM $ZH$ cross section is assumed.

Upper limits at 95% CL on the branching ratio $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ as a function of $m_{a}$ for $m_{\tilde{\chi}_{1}^{0}} = 10$ GeV and $m_{\tilde{\chi}_{2}^{0}} = 95$ GeV in the NMSSM scenario described in the text. The SM $ZH$ cross section is assumed.

Upper limits at 95% CL on the branching ratio $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ as a function of $m_{a}$ for $m_{\tilde{\chi}_{1}^{0}} = 10$ GeV and $m_{\tilde{\chi}_{2}^{0}} = 110$ GeV in the NMSSM scenario described in the text. The SM $ZH$ cross section is assumed.

Upper limits at 95% CL on the branching ratio $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ as a function of $m_{a}$ for $m_{\tilde{\chi}_{1}^{0}} = 20$ GeV and $m_{\tilde{\chi}_{2}^{0}} = 80$ GeV in the NMSSM scenario described in the text. The SM $ZH$ cross section is assumed.

Upper limits at 95% CL on the branching ratio $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ as a function of $m_{a}$ for $m_{\tilde{\chi}_{1}^{0}} = 30$ GeV and $m_{\tilde{\chi}_{2}^{0}} = 80$ GeV in the NMSSM scenario described in the text. The SM $ZH$ cross section is assumed.

Unweighted and weighted number of events after each stage of selection for the NMSSM scenario with $pp \rightarrow ZH$, $Z \rightarrow \ell^{+}\ell^{-}$, $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ where $(m_{a}, m_{\tilde{\chi}_{1}^{0}}, m_{\tilde{\chi}_{2}^{0}}) = (45,10,80)$ GeV and the Z boson decaying to $e^{+}e^{-}, \;\mu^{+}\mu^{-} \;\mathrm{or}\; \tau^{+}\tau^{-}$. All branching ratios in the Higgs boson decay chain are set to 100%. The weighted number of events corresponds to an integrated luminosity of $139 \;\mathrm{fb}^{-1}$. The "skimming selection" required either a single electron or muon with $p_{T} > 100\;$ GeV or a pair of electrons or muons each with $p_{T} > 20\;$ GeV. The preselection requirements include the trigger, absence of a bad jet or bad muon, and two leptons, where a lepton is either an electron or a muon.

Acceptance and efficiency of this analysis for the signal models considered in this paper. The signal is an NMSSM scenario with $pp \rightarrow ZH$, $Z \rightarrow \ell^{+}\ell^{-}$, $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ where the values of $(m_{a}, m_{\tilde{\chi}_{1}^{0}}, m_{\tilde{\chi}_{2}^{0}})$ are varied. The Z boson decays to $e^{+}e^{-}, \mu^{+}\mu^{-} \;\mathrm{or}\; \tau^{+}\tau^{-}$. All branching ratios in the Higgs boson decay chain are set to 100%. The product of acceptance times efficiency is defined by the fraction of simulated events that pass all the selection criteria of this analysis. The acceptance is defined by the fraction of simulated events that pass all the selection criteria as applied to Monte Carlo truth-level quantities. The efficiency is then defined as the acceptance times efficiency, divided by the acceptance.

Acceptance and efficiency of this analysis for the signal models considered in this paper. The signal is an NMSSM scenario with $pp \rightarrow ZH$, $Z \rightarrow \ell^{+}\ell^{-}$, $H \rightarrow \tilde{\chi}_{2}^{0}\tilde{\chi}_{1}^{0} \rightarrow a \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0} \rightarrow b\bar{b} \tilde{\chi}_{1}^{0}\tilde{\chi}_{1}^{0}$ where the values of $(m_{a}, m_{\tilde{\chi}_{1}^{0}}, m_{\tilde{\chi}_{2}^{0}})$ are varied. The Z boson decays to $e^{+}e^{-}, \mu^{+}\mu^{-} \;\mathrm{or}\; \tau^{+}\tau^{-}$. All branching ratios in the Higgs boson decay chain are set to 100%. The product of acceptance times efficiency is defined by the fraction of simulated events that pass all the selection criteria of this analysis. The acceptance is defined by the fraction of simulated events that pass all the selection criteria as applied to Monte Carlo truth-level quantities. The efficiency is then defined as the acceptance times efficiency, divided by the acceptance.

Expected +- 1 sigma 95% CL exclusion limit for the Zprime-2HDM model.

Expected +- 2 sigma 95% CL exclusion limit for the Zprime-2HDM model.

Observed 95% CL exclusion limit for the 2HDM+a model ggF production.

Expected 95% CL exclusion limit for the 2HDM+a model ggF production.

Expected +- 1 sigma 95% CL exclusion limit for the 2HDM+a model ggF production.

Expected +- 2 sigma 95% CL exclusion limit for the 2HDM+a model ggF production.

Observed 95% CL exclusion limit for the 2HDM+a model bbA production.

Expected 95% CL exclusion limit for the 2HDM+a model bbA production.

Expected +- 1 sigma 95% CL exclusion limit for the 2HDM+a model bbA production.

Expected +- 2 sigma 95% CL exclusion limit for the 2HDM+a model bbA production.

Observed 95% CL exclusion limit for the Zprime-2HDM model with the benchmark used in arXiv:1707.01302.

Expected 95% CL exclusion limit for the Zprime-2HDM model with the benchmark used in arXiv:1707.01302.

Expected +- 1 sigma 95% CL exclusion limit for the Zprime-2HDM model with the benchmark used in arXiv:1707.01302.

Expected +- 2 sigma 95% CL exclusion limit for the Zprime-2HDM model with the benchmark used in arXiv:1707.01302.

Expected and observed upper limits at 95% CL on cross-section for Zprime-2HDM model.

Expected and observed upper limits at 95% CL on cross-section for ggF producton in the 2HDM+a model.

Expected and observed upper limits at 95% CL on cross-section for bbA producton in the 2HDM+a model.

Model-independent upper limits on the visible cross-section $σ_{vis, $h(\bar{b})+DM} ≡ σ_{h+DM} \times B(h \to b\bar{b}) \times \mathcal{A} \times \epsilon$ in the different signal regions.

Theory cross-section for Zprime-2HDM model.

Theory cross-section for bbA production in the 2HDM+a model.

Theory cross-section for ggF production in the 2HDM+a model.

Distribution of Higgs boson candidate mass in 2b region with MET=150-200 GeV.

Distribution of Higgs boson candidate mass in 2b region with MET=200-350 GeV.

Distribution of Higgs boson candidate mass in 2b region with MET=350-500 GeV.

Distribution of Higgs boson candidate mass in 2b region with MET=500-750 GeV.

Distribution of Higgs boson candidate mass in 2b region with MET > 750 GeV.

Distribution of Higgs boson candidate mass in 3b region with MET=150-200 GeV.

Distribution of Higgs boson candidate mass in 3b region with MET=200-350 GeV.

Distribution of Higgs boson candidate mass in 3b region with MET=350-500 GeV.

Distribution of Higgs boson candidate mass in 3b region with MET > 500 GeV.

Yields in 1-lepton control region.

Yields in 2-lepton control region.

MET distribution in 2b region of the 0-lepton channel.

MET distribution in 3b region of the 0-lepton channel.

Expected signal yields after certain selection cuts in 2b region with MET=150-200 GeV.

Expected signal yields after certain selection cuts in 2b region with MET=200-350 GeV.

Expected signal yields after certain selection cuts in 2b region with MET=350-500 GeV.

Expected signal yields after certain selection cuts in 2b region with MET=500-750 GeV.

Expected signal yields after certain selection cuts in 2b region with MET > 750 GeV.

Expected signal yields after certain selection cuts in 3b region with MET=150-200 GeV.

Expected signal yields after certain selection cuts in 3b region with MET=200-350 GeV.

Expected signal yields after certain selection cuts in 3b region with MET=350-500 GeV.

Expected signal yields after certain selection cuts in 3b region with MET > 500 GeV.

Acceptance times efficiency for bbA production in the 2HDM+a model - 2b region with MET=150-200 GeV.

Acceptance times efficiency for bbA production in the 2HDM+a model - 2b region with MET=200-350 GeV.

Acceptance times efficiency for bbA production in the 2HDM+a model - 2b region with MET=350-500 GeV.

Acceptance times efficiency for bbA production in the 2HDM+a model - 2b region with MET=500-750 GeV.

Acceptance times efficiency for bbA production in the 2HDM+a model - 2b region with MET > 750 GeV.

Acceptance times efficiency for bbA production in the 2HDM+a model - 3b region with MET=150-200 GeV.

Acceptance times efficiency for bbA production in the 2HDM+a model - 3b region with MET=200-350 GeV.

Acceptance times efficiency for bbA production in the 2HDM+a model - 3b region with MET=350-500 GeV.

Acceptance times efficiency for bbA production in the 2HDM+a model - 3b region with MET>500 GeV.

Acceptance times efficiency for ggF production in the 2HDM+a model - 2b region with MET=150-200 GeV.

Acceptance times efficiency for ggF production in the 2HDM+a model - 2b region with MET=200-350 GeV.

Acceptance times efficiency for ggF production in the 2HDM+a model - 2b region with MET=350-500 GeV.

Acceptance times efficiency for ggF production in the 2HDM+a model - 2b region with MET=500-750 GeV.

Acceptance times efficiency for ggF production in the 2HDM+a model - 2b region with MET > 750 GeV.

Acceptance times efficiency for ggF production in the 2HDM+a model - 3b region with MET=150-200 GeV.

Acceptance times efficiency for ggF production in the 2HDM+a model - 3b region with MET=200-350 GeV.

Acceptance times efficiency for ggF production in the 2HDM+a model - 3b region with MET=350-500 GeV.

Acceptance times efficiency for ggF production in the 2HDM+a model - 3b region with MET > 500 GeV.

Acceptance times efficiency for ggF production in the Zprime-2HDM model - 2b region with MET=150-200 GeV.

Acceptance times efficiency for ggF production in the Zprime-2HDM model - 2b region with MET=200-350 GeV.

Acceptance times efficiency for ggF production in the Zprime-2HDM model - 2b region with MET=350-500 GeV.

Acceptance times efficiency for ggF production in the Zprime-2HDM model - 2b region with MET=500-750 GeV.

Acceptance times efficiency for ggF production in the Zprime-2HDM model - 2b region with MET > 750 GeV.

Acceptance times efficiency for ggF production in the Zprime-2HDM model - 3b region with MET=150-200 GeV.

Acceptance times efficiency for ggF production in the Zprime-2HDM model - 3b region with MET=200-350 GeV.

Acceptance times efficiency for ggF production in the Zprime-2HDM model - 3b region with MET=350-500 GeV.

Acceptance times efficiency for ggF production in the Zprime-2HDM model - 3b region with MET > 500 GeV.