This paper describes measurements of the semileptonic weak-neutral-current reactions νpμ→νpμ and ν¯pμ→ν¯pμ which yield the absolute differential cross sections dσ(νpμ)dQ2 and dσ(ν¯pμ)dQ2. The weak-neutral-current parameter, sin2θW, is determined to be sin2θW=0.220±0.016(stat.)(syst.)−0.031+0.023.
No description provided.
No description provided.
No description provided.
Total and differential cross sections for νμe→νμe and ν¯μe→ν¯μe are measured. Values for the model-independent neutral-current couplings of the electron are found to be gV=−0.107±0.035(stat)±0.028(syst) and gA=−0.514±0.023(stat)±0.028(syst). The electroweak mixing parameter sin2θW is determined to be 0.195±0.018(stat)±0.013(syst). Limits are set for the charge radius and magnetic moment of the neutrino as (〈r2〉)<0.24×10−32 cm2 and fμ<0.85×10−9 Bohr magnetons, respectively.
No description provided.
No description provided.
No description provided.
Measurements of the semileptonic weak-neutral-current reactions νμp→νμp and ν¯μp→ν¯μp are presented. The experiment was performed using a 170-metric-ton high-resolution target detector in the BNL wide-band neutrino beam. High-statistics samples yield the absolute differential cross sections dσ(νμp)/dQ2 and dσ(ν¯μp)/dQ2. A measurement of the axial-vector form factor GA(Q2) is also presented. The results are in good agreement with the standard model SU(2)×U(1). The weak-neutral-current parameter sin2thetaW is determined to be sin2θW=0.220±0.016(stat)−0.031+0.023(syst).
Errors contain both statistics and systematics, except for additional overall normalisation error given above. Neutrino energy is 0 to 5 GeV with peak at 0.8 Gev.
The weak coupling constants of the electron, gVe and gAe, are determined from measurements of the total and differential cross sections for the reaction νμe→νμe. The data also place limits of interest on the magnitudes of a neutrino charge radius and a possible neutrino magnetic dipole moment.
Neutrino beam 0 - 5 GeV.
The asymmetry of the cross section for π + photoproduction from a polarized butanol target has been measured at a c.m. angle 90° and photon energies between 300 and 900 MeV by a single-arm spectrometer detecting positive pions. Our results indicate that the asymmetry has clear positive peaks at photon energies 400 and 700 MeV with a deep valley at about 600 MeV. The general feature of the results is well reproduced by the phenomenological analyses made by Walker and ourselves; however, the best fit to the polarized target asymmetry data seems to give a somewhat different set of parameters from that given by Walker.
No description provided.
A search for non-resonant new phenomena, originating from either contact interactions or large extra spatial dimensions, has been carried out using events with two isolated electrons or muons. These events, produced at the LHC in proton-proton collisions at sqrt(s) = 7 TeV, were recorded by the ATLAS detector. The data sample, collected throughout 2011, corresponds to an integrated luminosity of 4.9 and 5.0 fb-1 in the e+e- and mu+mu- channels, respectively. No significant deviations from the Standard Model expectation are observed. Using a Bayesian approach, 95% confidence limit lower limits ranging from 9.0 to 13.9 TeV are placed on the energy scale of llqq contact interactions in the left-left isoscalar model. Lower limits ranging from 2.4 to 3.9 TeV are also set on the string scale in large extra dimension models. After combination of these limits with results from a similar search in the diphoton channel, slightly more stringent limits are obtained.
Expected and observed numbers of events in the dielectron channel for the contact interactions search region. The yields are normalized to the Z peak control region and include predictions for SM backgrounds as well as for SM+CI with different CI scales for constructive (LAMBDA-) and destructive (LAMBDA+) interference. The errors quoted originate from both systematic uncertainties and limited MC statistics.
Expected and observed numbers of events in the dimuon channel for the contact interactions search region. The yields are normalized to the Z peak control region and include predictions for SM backgrounds as well as for SM+CI with different CI scales for constructive (LAMBDA-) and destructive (LAMBDA+) interference. The errors quoted originate from both systematic uncertainties and limited MC statistics.
Expected and observed 95% C.L. lower limits on the contact interaction energy scale LAMBDA for the dielectron and dimuon channels, as well as for the combination of those channels. Results are provided for constructive and destruc- tive interference as well as different choices of flat priors.
Many extensions of the Standard Model posit the existence of heavy particles with long lifetimes. In this Letter, results are presented of a search for such particles, which decay at a significant distance from their production point, using a final state containing charged hadrons and an associated muon. This analysis uses a data sample of proton-proton collisions at sqrt(s)= 7 TeV corresponding to an integrated luminosity of 4.4 fb-1 collected in 2011 by the ATLAS detector operating at the Large Hadron Collider. Results are interpreted in the context of R-parity violating supersymmetric scenarios. No events in the signal region are observed and limits are set on the production cross section for supersymmetric particles, multiplied by the square of the branching ratio for a neutralino to decay to charged hadrons and a muon, as a function of the neutralino lifetime. To allow these limits to be used in a variety of models, they are presented for a range of squark and neutralino masses.
Efficiency-vs-radial-vertex-position without re-tracking The efficiency for reconstructing a displaced vertex passing all cuts, as a function of radial distance from the z-axis to the vertex positon. The retrack and noretrack suffixes refer to whether or not the procedure known as re-tracking, where the tracking algorithm is re-run with looser cuts, on the leftover hits from standard tracking, was used to select the tracks that were input to the vertexing algorithm.
Efficiency-vs-radial-vertex-position with re-tracking The efficiency for reconstructing a displaced vertex passing all cuts, as a function of radial distance from the z-axis to the vertex positon. The retrack and noretrack suffixes refer to whether or not the procedure known as re-tracking, where the tracking algorithm is re-run with looser cuts, on the leftover hits from standard tracking, was used to select the tracks that were input to the vertexing algorithm.
Event selection efficiency vs mean proper decay length The MH, HH, ML suffix used for overlaying the graphs refers to the combinations of squark and neutralino masses in the signal MC sample: MH is 700GeV squarks and 494GeV neutralinos, HH is 1.5TeV squarks and 494GeV neutralinos, and ML is 700GeV squarks and 108GeV neutralinos. The tables show the efficiency for reconstructing a signal event, where at least one vertex candidate passes all selection requirements, as a function of the proper decay length c*tau of the neutralino.
Measurements of inclusive jet suppression in heavy ion collisions at the LHC provide direct sensitivity to the physics of jet quenching. In a sample of lead-lead collisions at $\sqrt{s_{NN}}$ = 2.76 TeV corresponding to an integrated luminosity of approximately 7 inverse microbarns, ATLAS has measured jets with a calorimeter over the pseudorapidity interval |$\eta$| < 2.1 and over the transverse momentum range 38 < pT < 210 GeV. Jets were reconstructed using the anti-$k_t$ algorithm with values for the distance parameter that determines the nominal jet radius of R = 0.2, 0.3, 0.4 and 0.5. The centrality dependence of the jet yield is characterized by the jet "central-to-peripheral ratio," $R_{cp}$. Jet production is found to be suppressed by approximately a factor of two in the 10% most central collisions relative to peripheral collisions. $R_{cp}$ varies smoothly with centrality as characterized by the number of participating nucleons. The observed suppression is only weakly dependent on jet radius and transverse momentum. These results provide the first direct measurement of inclusive jet suppression in heavy ion collisions and complement previous measurements of dijet transverse energy imbalance at the LHC.
Glauber model calculation of the mean numbers of Npart and its associated errors, the mean Ncoll ratios, and Rcoll with fractional errors as a function of the centrality bins.
The Rcp values as a function of jet PT for the four R values, 0.2, 0.3, 0.4 and 0.5 for the collision centrality in the range 0 - 10 %.
The Rcp values as a function of jet PT for the four R values, 0.2, 0.3, 0.4 and 0.5 for the collision centrality in the range 10 - 20 %.
Using 1.8 fb-1 of pp collisions at a center-of-mass energy of 7 TeV recorded by the ATLAS detector at the Large Hadron Collider, we present measurements of the production cross sections of Upsilon(1S,2S,3S) mesons. Upsilon mesons are reconstructed using the di-muon decay mode. Total production cross sections for p_T<70 GeV and in the rapidity interval |Upsilon|<2.25 are measured to be 8.01+-0.02+-0.36+-0.31 nb, 2.05+-0.01+-0.12+-0.08 nb, 0.92+-0.01+-0.07+-0.04 nb respectively, with uncertainties separated into statistical, systematic, and luminosity measurement effects. In addition, differential cross section times di-muon branching fractions for Upsilon(1S), Upsilon(2S), and Upsilon(3S) as a function of Upsilon transverse momentum p_T and rapidity are presented. These cross sections are obtained assuming unpolarized production. If the production polarization is fully transverse or longitudinal with no azimuthal dependence in the helicity frame the cross section may vary by approximately +-20%. If a non-trivial azimuthal dependence is considered, integrated cross sections may be significantly enhanced by a factor of two or more. We compare our results to several theoretical models of Upsilon meson production, finding that none provide an accurate description of our data over the full range of Upsilon transverse momenta accessible with this dataset.
Corrected cross-section measurements in the isotopic spin-alignment scenario. The second (sys) error is the uncertainty in the luminosity.
Fiducial Upsilon(1S) production cross-section, where pT>4 GeV and |eta|<2.3 for both muons, as a function of Upsilon(1S) pT in the Upsilon(1S) rapidity (|y|) bins 0-1.2 and 1.2-2.25. The first uncertainty is statistical, the second is systematic.
Fiducial Upsilon(2S) production cross-section, where pT>4 GeV and |eta|<2.3 for both muons, as a function of Upsilon(2S) pT in the Upsilon(2S) rapidity (|y|) bins 0-1.2 and 1.2-2.25. The first uncertainty is statistical, the second is systematic.
This paper presents a search for the t-channel exchange of an R-parity violating scalar top quark (\={t}) in the emu continuum using 2.1/fb of data collected by the ATLAS detector in sqrt(s) = 7 TeV pp collisions at the Large Hadron Collider. Data are found to be consistent with the expectation from the Standard Model backgrounds. Limits on R-parity-violating couplings at 95% C.L. are calculated as a function of the scalar top mass (m_{\={t}}). The upper limits on the production cross section for pp->emuX, through the t-channel exchange of a scalar top quark, ranges from 170 fb for m_{\={t}}=95 GeV to 30 fb for m_{\={t}}=1000 GeV.
The observed E-MU invariant mass distribution plus SM background and signal predicitons for a n stop mass of 95 GeV.
Information about the signal samples used.
The ratios of the observed and expected upper cross section limits to the theoretical cross sections as a function of the scalar top mass.
Forum