Identification of hadronic tau lepton decays using a deep neural network

The CMS collaboration Tumasyan, Armen ; Adam, Wolfgang ; Andrejkovic, Janik Walter ; et al.
JINST 17 (2022) P07023, 2022.
Inspire Record 2016054 DOI 10.17182/hepdata.116281

A new algorithm is presented to discriminate reconstructed hadronic decays of tau leptons ($\tau_\mathrm{h}$) that originate from genuine tau leptons in the CMS detector against $\tau_\mathrm{h}$ candidates that originate from quark or gluon jets, electrons, or muons. The algorithm inputs information from all reconstructed particles in the vicinity of a $\tau_\mathrm{h}$ candidate and employs a deep neural network with convolutional layers to efficiently process the inputs. This algorithm leads to a significantly improved performance compared with the previously used one. For example, the efficiency for a genuine $\tau_\mathrm{h}$ to pass the discriminator against jets increases by 10-30% for a given efficiency for quark and gluon jets. Furthermore, a more efficient $\tau_\mathrm{h}$ reconstruction is introduced that incorporates additional hadronic decay modes. The superior performance of the new algorithm to discriminate against jets, electrons, and muons and the improved $\tau_\mathrm{h}$ reconstruction method are validated with LHC proton-proton collision data at $\sqrt{s} =$ 13 TeV.

30 data tables

Decay mode confusion matrix. For a given generated decay mode, the fractions of reconstructed tau_h in different decay modes are given, as well as the fraction of generated tau_h that are not reconstructed. Both the generated and reconstructed tau_h need to fulfil pt > 20 GeV and |eta| < 2.3. The tau_h candidates come from a Z to tau tau event sample with m(tau, tau) > 50 GeV.

Efficiency for quark and gluon jets to pass different tau identification discriminators versus the efficiency for genuine tau_h. The upper two plots are obtained with jets from the W+jets simulated sample and the lower two plots with jets from the tt sample. The left two plots include jets and genuine tau_h with pt < 100 GeV, whereas the right two plots include those with pt > 100 GeV. The working points are indicated as full circles. The efficiency for jets from the W+jets event sample, enriched in quark jets, to pass the discriminators is higher compared to jets from the tt event sample, which has a larger fraction of gluon and b-quark jets. The jet efficiency for a given tau_h efficiency is larger for jets and tau_h with pt < 100 GeV than for those with pt > 100 GeV. Compared with the previously used MVA discriminator, the DEEPTAU discriminator reduces the jet efficiency for a given tau_h efficiency by consistently more than a factor of 1.8, and by more at high tau_h efficiency. The additional gain at high pt comes from the inclusion of updated decay modes in the tau_h reconstruction, as illustrated by the curves for the previously used MVA discriminator but including reconstructed tau_h candidates with additional decay modes.

Efficiency for quark and gluon jets to pass different tau identification discriminators versus the efficiency for genuine tau_h. The upper two plots are obtained with jets from the W+jets simulated sample and the lower two plots with jets from the tt sample. The left two plots include jets and genuine tau_h with pt < 100 GeV, whereas the right two plots include those with pt > 100 GeV. The working points are indicated as full circles. The efficiency for jets from the W+jets event sample, enriched in quark jets, to pass the discriminators is higher compared to jets from the tt event sample, which has a larger fraction of gluon and b-quark jets. The jet efficiency for a given tau_h efficiency is larger for jets and tau_h with pt < 100 GeV than for those with pt > 100 GeV. Compared with the previously used MVA discriminator, the DEEPTAU discriminator reduces the jet efficiency for a given tau_h efficiency by consistently more than a factor of 1.8, and by more at high tau_h efficiency. The additional gain at high pt comes from the inclusion of updated decay modes in the tau_h reconstruction, as illustrated by the curves for the previously used MVA discriminator but including reconstructed tau_h candidates with additional decay modes.

More…

The ALICE Transition Radiation Detector: construction, operation, and performance

The ALICE collaboration Acharya, Shreyasi ; Adam, Jaroslav ; Adamova, Dagmar ; et al.
Nucl.Instrum.Meth.A 881 (2018) 88-127, 2018.
Inspire Record 1622554 DOI 10.17182/hepdata.79498

The Transition Radiation Detector (TRD) was designed and built to enhance the capabilities of the ALICE detector at the Large Hadron Collider (LHC). While aimed at providing electron identification and triggering, the TRD also contributes significantly to the track reconstruction and calibration in the central barrel of ALICE. In this paper the design, construction, operation, and performance of this detector are discussed. A pion rejection factor of up to 410 is achieved at a momentum of 1 GeV/$c$ in p-Pb collisions and the resolution at high transverse momentum improves by about 40% when including the TRD information in track reconstruction. The triggering capability is demonstrated both for jet, light nuclei, and electron selection.

5 data tables

Most probable charge deposit signal normalised to that of minimum ionising particles as a function of $\beta\gamma$ for $\pi$, $\it{e}$ test beam (dE/dx). Statistical uncertainties as vertical error bars.

Most probable charge deposit signal normalised to that of minimum ionising particles as a function of $\beta\gamma$ for $\pi$, $\it{e}$ test beam (dE/dx + TR). Statistical uncertainties as vertical error bars.

Most probable charge deposit signal normalised to that of minimum ionising particles as a function of $\beta\gamma$ for $\pi$, $\it{e}$ and proton in pp collisions ($\sqrt{s} = 7$ TeV). Statistical uncertainties as vertical error bars. Uncertainties in momentum and thus $\beta \gamma$ determination are drawn as horizontal error bars.

More…

A low-mass dark matter search using ionization signals in XENON100

The XENON collaboration Aprile, E. ; Aalbers, J. ; Agostini, F. ; et al.
Phys.Rev.D 94 (2016) 092001, 2016.
Inspire Record 1463250 DOI 10.17182/hepdata.78548

We perform a low-mass dark matter search using an exposure of 30\,kg$\times$yr with the XENON100 detector. By dropping the requirement of a scintillation signal and using only the ionization signal to determine the interaction energy, we lowered the energy threshold for detection to 0.7\,keV for nuclear recoils. No dark matter detection can be claimed because a complete background model cannot be constructed without a primary scintillation signal. Instead, we compute an upper limit on the WIMP-nucleon scattering cross section under the assumption that every event passing our selection criteria could be a signal event. Using an energy interval from 0.7\,keV to 9.1\,keV, we derive a limit on the spin-independent WIMP-nucleon cross section that excludes WIMPs with a mass of 6\,GeV/$c^2$ above $1.4 \times 10^{-41}$\,cm$^2$ at 90\% confidence level.

1 data table

WIMP exclusion limit on the spin-independent WIMP-nucleon scattering cross section at 90% confidence level.


Measurements of $\pi^{\pm}$ differential yields from the surface of the T2K replica target for incoming 31 GeV/c protons with the NA61/SHINE spectrometer at the CERN SPS

The NA61/SHINE collaboration Abgrall, N. ; Aduszkiewicz, A. ; Ajaz, M. ; et al.
Eur.Phys.J.C 76 (2016) 617, 2016.
Inspire Record 1431983 DOI 10.17182/hepdata.77061

Measurements of particle emission from a replica of the T2K 90 cm-long carbon target were performed in the NA61/SHINE experiment at CERN SPS, using data collected during a high-statistics run in 2009. An efficient use of the long-target measurements for neutrino flux predictions in T2K requires dedicated reconstruction and analysis techniques. Fully-corrected differential yields of $\pi^\pm$-mesons from the surface of the T2K replica target for incoming 31 GeV/c protons are presented. A possible strategy to implement these results into the T2K neutrino beam predictions is discussed and the propagation of the uncertainties of these results to the final neutrino flux is performed.

132 data tables

Spectra of positively charged pions at the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and for longitudinal bin $z1$, as a function of momentum. The normalization is per proton on target.

Spectra of positively charged pions at the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and for longitudinal bin $z1$, as a function of momentum. The normalization is per proton on target.

Spectra of positively charged pions at the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and for longitudinal bin $z1$, as a function of momentum. The normalization is per proton on target.

More…

Measurement of the Multiple-Muon Charge Ratio in the MINOS Far Detector

The MINOS collaboration Adamson, P. ; Anghel, I. ; Aurisano, A. ; et al.
Phys.Rev.D 93 (2016) 052017, 2016.
Inspire Record 1419065 DOI 10.17182/hepdata.77051

The charge ratio, $R_\mu = N_{\mu^+}/N_{\mu^-}$, for cosmogenic multiple-muon events observed at an under- ground depth of 2070 mwe has been measured using the magnetized MINOS Far Detector. The multiple-muon events, recorded nearly continuously from August 2003 until April 2012, comprise two independent data sets imaged with opposite magnetic field polarities, the comparison of which allows the systematic uncertainties of the measurement to be minimized. The multiple-muon charge ratio is determined to be $R_\mu = 1.104 \pm 0.006 {\rm \,(stat.)} ^{+0.009}_{-0.010} {\rm \,(syst.)} $. This measurement complements previous determinations of single-muon and multiple-muon charge ratios at underground sites and serves to constrain models of cosmic ray interactions at TeV energies.

1 data table

Efficiency-corrected charge ratios as a function of measured muon multiplicity, $M$.