Charged-hadron spectrum in the centrality interval 5-10% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 10-20% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 20-30% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 30-40% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 40-60% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 60-90% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 0-90% for p+Pb, divided by 〈TPPB〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron cross-section in pp collisions. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 0-5% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 5-10% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 10-20% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 20-30% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 30-40% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 40-50% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 50-60% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron spectrum in the centrality interval 60-80% for Pb+Pb, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Charged-hadron cross-section in pp collisions. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 0-5% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 5-10% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 10-20% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 20-30% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 30-40% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 40-50% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 50-60% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Charged-hadron spectrum in the centrality interval 60-80% for Xe+Xe, divided by 〈TAA〉. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature. The systematic uncertainty on momentum bias is negligible at low pT; in such cases, it is omitted in the table below.

Nuclear modification factor in centrality interval 0-5% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-60% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-90% for p+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Pb+Pb. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 0-5% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 5-10% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 10-20% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 20-30% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 30-40% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 40-50% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 50-60% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

Nuclear modification factor in centrality interval 60-80% for Xe+Xe. The systematic uncertainties are described in the section 7 of the paper. The total systematic uncertainties are determined by adding the contributions from all relevant sources in quadrature.

The Bose-Einstein correlation (BEC) parameter R as a function of n_ch for HMT events using different MC generators in the calculation of R₂(Q). The uncertainties shown are statistical. The lower panel of each plot shows the ratio of the BEC parameters obtained using EPOS LHC (red circles), Pythia 8 Monash (blue squares) and Herwig++ UE-EE-5 (green triangles) compared with the parameters obtained using Pythia 8 A2. The gray band in the lower panels is the MC systematic uncertainty, obtained as explained in the text.

The Bose-Einstein correlation (BEC) parameter R as a function of k_T for MB events using different MC generators in the calculation of R₂(Q). The uncertainties shown are statistical. The lower panel of each plot shows the ratio of the BEC parameters obtained using EPOS LHC (red circles), Pythia 8 Monash (blue squares) and Herwig++ UE-EE-5 (green triangles) compared with the parameters obtained using Pythia 8 A2. The gray band in the lower panels is the MC systematic uncertainty, obtained as explained in the text.

The Bose-Einstein correlation (BEC) parameter λ as a function of k_T for MB events using different MC generators in the calculation of R₂(Q). The uncertainties shown are statistical. The lower panel of each plot shows the ratio of the BEC parameters obtained using EPOS LHC (red circles), Pythia 8 Monash (blue squares) and Herwig++ UE-EE-5 (green triangles) compared with the parameters obtained using Pythia 8 A2. The gray band in the lower panels is the MC systematic uncertainty, obtained as explained in the text.

The two-particle double-ratio correlation function, R₂(Q), for pp collisions for track p_T >100 MeV at √s=13 TeV in the multiplicity interval 71 ≤ n_ch < 80 for the minimum-bias (MB) events. The blue dashed and red solid lines show the results of the exponential and Gaussian fits, respectively. The region excluded from the fits is shown. The statistical uncertainty and the systematic uncertainty for imperfections in the data reconstruction procedure are added in quadrature.

The two-particle double-ratio correlation function, R₂(Q), for pp collisions for track p_T >100 MeV at √s=13 TeV in the multiplicity interval 231 ≤ n_ch < 300 for the high-multiplicity track (HMT) events. The blue dashed and red solid lines show the results of the exponential and Gaussian fits, respectively. The region excluded from the fits is shown. The statistical uncertainty and the systematic uncertainty for imperfections in the data reconstruction procedure are added in quadrature.

The dependence of the correlation strength, λ(m_ch), on rescaled multiplicity, m_ch, obtained from the exponential fit of the R₂(Q) correlation functions for tracks with p_T > 100  MeV and p_T > 500 MeV at √s = 13  TeV for the minimum-bias (MB) and high multiplicity track (HMT) data. The uncertainties represent the sum in quadrature of the statistical and asymmetric systematic contributions. The black and blue solid curves represent the exponential fit of λ(m_ch) for p_T >100 MeV and p_T >500 MeV, respectively.

The dependence of the correlation strength, λ(m_ch), on rescaled multiplicity, m_ch, obtained from the exponential fit of the R₂(Q) correlation functions for tracks with p_T > 100  MeV and p_T > 500 MeV at √s = 13  TeV for the minimum-bias (MB) and high multiplicity track (HMT) data. The uncertainties represent the sum in quadrature of the statistical and asymmetric systematic contributions. The black and blue solid curves represent the exponential fit of λ(m_ch) for p_T >100 MeV and p_T >500 MeV, respectively.

The dependence of the correlation strength, λ(m_ch), on rescaled multiplicity, m_ch, obtained from the exponential fit of the R₂(Q) correlation functions for tracks with p_T > 100  MeV and p_T > 500 MeV at √s = 13  TeV for the minimum-bias (MB) and high multiplicity track (HMT) data. The uncertainties represent the sum in quadrature of the statistical and asymmetric systematic contributions. The black and blue solid curves represent the exponential fit of λ(m_ch) for p_T >100 MeV and p_T >500 MeV, respectively.

The dependence of the correlation strength, λ(m_ch), on rescaled multiplicity, m_ch, obtained from the exponential fit of the R₂(Q) correlation functions for tracks with p_T > 100  MeV and p_T > 500 MeV at √s = 13  TeV for the minimum-bias (MB) and high multiplicity track (HMT) data. The uncertainties represent the sum in quadrature of the statistical and asymmetric systematic contributions. The black and blue solid curves represent the exponential fit of λ(m_ch) for p_T >100 MeV and p_T >500 MeV, respectively.

The dependence of the source radius, R(m_ch), on m_ch. The uncertainties represent the sum in quadrature of the statistical and asymmetric systematic contributions. The black and blue solid curves represent the fit of R(m_ch) for ∛m_ch < 1.2 for p_T >100 MeV and p_T >500 MeV, respectively. The black and blue dotted curves are extensions of the black and blue solid curves beyond ∛m_ch > 1.2, respectively. The black and brown dashed curves represent the saturation value of R(m_ch) for ∛m_ch > 1.45 with p_T >100 MeV and for ∛m_ch > 1.6 with p_T >500 MeV, respectively.

The dependence of the source radius, R(m_ch), on m_ch. The uncertainties represent the sum in quadrature of the statistical and asymmetric systematic contributions. The black and blue solid curves represent the fit of R(m_ch) for ∛m_ch < 1.2 for p_T >100 MeV and p_T >500 MeV, respectively. The black and blue dotted curves are extensions of the black and blue solid curves beyond ∛m_ch > 1.2, respectively. The black and brown dashed curves represent the saturation value of R(m_ch) for ∛m_ch > 1.45 with p_T >100 MeV and for ∛m_ch > 1.6 with p_T >500 MeV, respectively.

The dependence of the source radius, R(m_ch), on m_ch. The uncertainties represent the sum in quadrature of the statistical and asymmetric systematic contributions. The black and blue solid curves represent the fit of R(m_ch) for ∛m_ch < 1.2 for p_T >100 MeV and p_T >500 MeV, respectively. The black and blue dotted curves are extensions of the black and blue solid curves beyond ∛m_ch > 1.2, respectively. The black and brown dashed curves represent the saturation value of R(m_ch) for ∛m_ch > 1.45 with p_T >100 MeV and for ∛m_ch > 1.6 with p_T >500 MeV, respectively.

The dependence of the source radius, R(m_ch), on m_ch. The uncertainties represent the sum in quadrature of the statistical and asymmetric systematic contributions. The black and blue solid curves represent the fit of R(m_ch) for ∛m_ch < 1.2 for p_T >100 MeV and p_T >500 MeV, respectively. The black and blue dotted curves are extensions of the black and blue solid curves beyond ∛m_ch > 1.2, respectively. The black and brown dashed curves represent the saturation value of R(m_ch) for ∛m_ch > 1.45 with p_T >100 MeV and for ∛m_ch > 1.6 with p_T >500 MeV, respectively.

The dependence of the R(m_ch) on ∛m_ch. The uncertainties represent the sum in quadrature of the statistical and asymmetric systematic contributions. The black and blue solid curves represent the fit of R(m_ch) for ∛m_ch < 1.2 for p_T >100 MeV and p_T >500 MeV, respectively. The black and blue dotted curves are extensions of the black and blue solid curves beyond ∛m_ch > 1.2, respectively. The black and brown dashed curves represent the saturation value of R(m_ch) for ∛m_ch > 1.45 with p_T >100 MeV and for ∛m_ch > 1.6 with p_T >500 MeV, respectively

The dependence of the R(m_ch) on ∛m_ch. The uncertainties represent the sum in quadrature of the statistical and asymmetric systematic contributions. The black and blue solid curves represent the fit of R(m_ch) for ∛m_ch < 1.2 for p_T >100 MeV and p_T >500 MeV, respectively. The black and blue dotted curves are extensions of the black and blue solid curves beyond ∛m_ch > 1.2, respectively. The black and brown dashed curves represent the saturation value of R(m_ch) for ∛m_ch > 1.45 with p_T >100 MeV and for ∛m_ch > 1.6 with p_T >500 MeV, respectively

The dependence of the R(m_ch) on ∛m_ch. The uncertainties represent the sum in quadrature of the statistical and asymmetric systematic contributions. The black and blue solid curves represent the fit of R(m_ch) for ∛m_ch < 1.2 for p_T >100 MeV and p_T >500 MeV, respectively. The black and blue dotted curves are extensions of the black and blue solid curves beyond ∛m_ch > 1.2, respectively. The black and brown dashed curves represent the saturation value of R(m_ch) for ∛m_ch > 1.45 with p_T >100 MeV and for ∛m_ch > 1.6 with p_T >500 MeV, respectively

The dependence of the R(m_ch) on ∛m_ch. The uncertainties represent the sum in quadrature of the statistical and asymmetric systematic contributions. The black and blue solid curves represent the fit of R(m_ch) for ∛m_ch < 1.2 for p_T >100 MeV and p_T >500 MeV, respectively. The black and blue dotted curves are extensions of the black and blue solid curves beyond ∛m_ch > 1.2, respectively. The black and brown dashed curves represent the saturation value of R(m_ch) for ∛m_ch > 1.45 with p_T >100 MeV and for ∛m_ch > 1.6 with p_T >500 MeV, respectively

Comparison of single-ratio two-particle correlation functions, using the unlike-charge particle (UCP) pair reference sample, for minimum-bias (MB) events, showing C₂^data(Q) (top panel) at 13 TeV (black circles) and 7 TeV (open blue circles), and the ratio of C₂^7 TeV (Q) to C₂^13 TeV (Q) (bottom panel). Comparison of C₂^data (Q) for representative multiplicity region 3.09 < m_ch ≤ 3.86. The statistical and systematic uncertainties, combined in quadrature, are presented. The systematic uncertainties include track efficiency, Coulomb correction, non-closure and multiplicity-unfolding uncertainties.

Comparison of single-ratio two-particle correlation functions, using the unlike-charge particle (UCP) pair reference sample, for minimum-bias (MB) events, showing C₂^data(Q) (top panel) at 13  TeV (black circles) and 7  TeV (open blue circles), and the ratio of C₂^7 TeV (Q) to C₂^13 TeV (Q) (bottom panel). Comparison of C₂^data (Q) for representative k_T region 400 < k_T ≤500  MeV. The statistical and systematic uncertainties, combined in quadrature, are presented. The systematic uncertainties include track efficiency, Coulomb correction, non-closure and multiplicity-unfolding uncertainties.

The k_T dependence of the correlation strength, λ(k_T), obtained from the exponential fit to the R₂(Q) correlation functions for events with multiplicity n_ch ≥ 2 and transfer momentum of tracks with p_T >100 MeV and p_T >500 MeV at √s=13 TeV for the minimum-bias (MB) and high-multiplicity track (HMT) events. The uncertainties represent the sum in quadrature of the statistical and systematic contributions. The curves represent the exponential fits to λ(k_T).

The k_T dependence of the correlation strength, λ(k_T), obtained from the exponential fit to the R₂(Q) correlation functions for events with multiplicity n_ch ≥ 2 and transfer momentum of tracks with p_T >100 MeV and p_T >500 MeV at √s=13 TeV for the minimum-bias (MB) and high-multiplicity track (HMT) events. The uncertainties represent the sum in quadrature of the statistical and systematic contributions. The curves represent the exponential fits to λ(k_T).

The k_T dependence of the correlation strength, λ(k_T), obtained from the exponential fit to the R₂(Q) correlation functions for events with multiplicity n_ch ≥ 2 and transfer momentum of tracks with p_T >100 MeV and p_T >500 MeV at √s=13 TeV for the minimum-bias (MB) and high-multiplicity track (HMT) events. The uncertainties represent the sum in quadrature of the statistical and systematic contributions. The curves represent the exponential fits to λ(k_T).

The k_T dependence of the correlation strength, λ(k_T), obtained from the exponential fit to the R₂(Q) correlation functions for events with multiplicity n_ch ≥ 2 and transfer momentum of tracks with p_T >100 MeV and p_T >500 MeV at √s=13 TeV for the minimum-bias (MB) and high-multiplicity track (HMT) events. The uncertainties represent the sum in quadrature of the statistical and systematic contributions. The curves represent the exponential fits to λ(k_T).

The k_T dependence of the source radius, R(k_T), obtained from the exponential fit to the R₂(Q) correlation functions for events with multiplicity n_ch ≥ 2 and transfer momentum of tracks with p_T >100 MeV and p_T >500 MeV at √s=13 TeV for the minimum-bias (MB) and high-multiplicity track (HMT) events. The uncertainties represent the sum in quadrature of the statistical and systematic contributions. The curves represent the exponential fits to R(k_T).

The k_T dependence of the source radius, R(k_T), obtained from the exponential fit to the R₂(Q) correlation functions for events with multiplicity n_ch ≥ 2 and transfer momentum of tracks with p_T >100 MeV and p_T >500 MeV at √s=13 TeV for the minimum-bias (MB) and high-multiplicity track (HMT) events. The uncertainties represent the sum in quadrature of the statistical and systematic contributions. The curves represent the exponential fits to R(k_T).

The k_T dependence of the source radius, R(k_T), obtained from the exponential fit to the R₂(Q) correlation functions for events with multiplicity n_ch ≥ 2 and transfer momentum of tracks with p_T >100 MeV and p_T >500 MeV at √s=13 TeV for the minimum-bias (MB) and high-multiplicity track (HMT) events. The uncertainties represent the sum in quadrature of the statistical and systematic contributions. The curves represent the exponential fits to R(k_T).

The k_T dependence of the source radius, R(k_T), obtained from the exponential fit to the R₂(Q) correlation functions for events with multiplicity n_ch ≥ 2 and transfer momentum of tracks with p_T >100 MeV and p_T >500 MeV at √s=13 TeV for the minimum-bias (MB) and high-multiplicity track (HMT) events. The uncertainties represent the sum in quadrature of the statistical and systematic contributions. The curves represent the exponential fits to R(k_T).

The two-dimensional dependence on m_ch and k_T for p_T > 100 MeV for the correlation strength, λ, obtained from the exponential fit to the R₂(Q) correlation functions using the MB sample for m_ch ≤ 3.08 and the HMT sample for m_ch > 3.08.

The two-dimensional dependence on m_ch and k_T for p_T > 100 MeV for the source radius, R, obtained from the exponential fit to the R₂(Q) correlation functions using the MB sample for m_ch ≤ 3.08 and the HMT sample for m_ch > 3.08.

The parameter λ for p_T > 100 MeV as a function of k_T in selected low m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter λ for p_T > 100 MeV as a function of k_T in selected low m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter λ for p_T > 100 MeV as a function of k_T in selected high m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter λ for p_T > 100 MeV as a function of k_T in selected high m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter λ for p_T > 100 MeV as a function of m_ch in k_T intervals between 0.1 and 0.5 GeV. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter λ for p_T > 100 MeV as a function of m_ch in k_T intervals between 0.1 and 0.5 GeV. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter λ for p_T > 100 MeV as a function of m_ch in k_T intervals between 0.5 and 1.5 GeV. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter λ for p_T > 100 MeV as a function of m_ch in k_T intervals between 0.5 and 1.5 GeV. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 100 MeV as a function of k_T in selected low m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 100 MeV as a function of k_T in selected low m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 100 MeV as a function of k_T in selected high m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 100 MeV as a function of k_T in selected high m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 100 MeV as a function of m_ch in k_T intervals between 0.1 and 0.5 GeV. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 100 MeV as a function of m_ch in k_T intervals between 0.1 and 0.5 GeV. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 100 MeV as a function of m_ch in k_T intervals between 0.5 and 1.5 GeV. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 100 MeV as a function of m_ch in k_T intervals between 0.5 and 1.5 GeV. The error bars and boxes represent the statistical and systematic contributions, respectively.

The fit parameter μ describing the dependence of the correlation strength, λ, on charged-particle scaled multiplicity, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid (blue dashed) curve represents the exponential fit of the dependence of parameter μ on m_ch for tracks with p_T >100 MeV (p_T >500 MeV).

The fit parameter μ describing the dependence of the correlation strength, λ, on charged-particle scaled multiplicity, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid (blue dashed) curve represents the exponential fit of the dependence of parameter μ on m_ch for tracks with p_T >100 MeV (p_T >500 MeV).

The fit parameter μ describing the dependence of the correlation strength, λ, on charged-particle scaled multiplicity, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid (blue dashed) curve represents the exponential fit of the dependence of parameter μ on m_ch for tracks with p_T >100 MeV (p_T >500 MeV).

The fit parameter μ describing the dependence of the correlation strength, λ, on charged-particle scaled multiplicity, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid (blue dashed) curve represents the exponential fit of the dependence of parameter μ on m_ch for tracks with p_T >100 MeV (p_T >500 MeV).

The fit parameter ν describing the dependence of the correlation strength, λ, on charged-particle scaled multiplicity, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid (blue dashed) curve represents the exponential fit of the dependence of parameter ν on m_ch for tracks with p_T >100 MeV (p_T >500 MeV).

The fit parameter ν describing the dependence of the correlation strength, λ, on charged-particle scaled multiplicity, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid (blue dashed) curve represents the exponential fit of the dependence of parameter ν on m_ch for tracks with p_T >100 MeV (p_T >500 MeV).

The fit parameter ν describing the dependence of the correlation strength, λ, on charged-particle scaled multiplicity, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid (blue dashed) curve represents the exponential fit of the dependence of parameter ν on m_ch for tracks with p_T >100 MeV (p_T >500 MeV).

The fit parameter ν describing the dependence of the correlation strength, λ, on charged-particle scaled multiplicity, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid (blue dashed) curve represents the exponential fit of the dependence of parameter ν on m_ch for tracks with p_T >100 MeV (p_T >500 MeV).

The parameter ξ describing the dependence of the source radius, R, on charged-particle scaled multiplicity, m_ch, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid and blue dashed curves represent the saturated value of the parameter ξ for m_ch > 3.0 for tracks with p_T >100 MeV and for m_ch > 2.8 for tracks with p_T >500 MeV, respectively.

The parameter ξ describing the dependence of the source radius, R, on charged-particle scaled multiplicity, m_ch, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid and blue dashed curves represent the saturated value of the parameter ξ for m_ch > 3.0 for tracks with p_T >100 MeV and for m_ch > 2.8 for tracks with p_T >500 MeV, respectively.

The parameter ξ describing the dependence of the source radius, R, on charged-particle scaled multiplicity, m_ch, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid and blue dashed curves represent the saturated value of the parameter ξ for m_ch > 3.0 for tracks with p_T >100 MeV and for m_ch > 2.8 for tracks with p_T >500 MeV, respectively.

The parameter ξ describing the dependence of the source radius, R, on charged-particle scaled multiplicity, m_ch, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid and blue dashed curves represent the saturated value of the parameter ξ for m_ch > 3.0 for tracks with p_T >100 MeV and for m_ch > 2.8 for tracks with p_T >500 MeV, respectively.

The parameter κ describing the dependence of the source radius, R, on charged-particle scaled multiplicity, m_ch, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid and blue dashed curves represent the exponential fit to the parameter κ for tracks with p_T >100 MeV and for tracks with p_T >500 MeV, respectively.

The parameter κ describing the dependence of the source radius, R, on charged-particle scaled multiplicity, m_ch, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid and blue dashed curves represent the exponential fit to the parameter κ for tracks with p_T >100 MeV and for tracks with p_T >500 MeV, respectively.

The parameter κ describing the dependence of the source radius, R, on charged-particle scaled multiplicity, m_ch, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid and blue dashed curves represent the exponential fit to the parameter κ for tracks with p_T >100 MeV and for tracks with p_T >500 MeV, respectively.

The parameter κ describing the dependence of the source radius, R, on charged-particle scaled multiplicity, m_ch, for track p_T>100 MeV and track p_T>500 MeV in the minimum-bias (MB) and high-multiplicity track (HMT) samples at √s = 13 TeV. The error bars and boxes represent the statistical and systematic contributions, respectively. The black solid and blue dashed curves represent the exponential fit to the parameter κ for tracks with p_T >100 MeV and for tracks with p_T >500 MeV, respectively.

The two-dimensional dependence on m_ch and k_T for p_T > 500 MeV for the correlation strength, λ, obtained from the exponential fit to the R₂(Q) correlation functions using the MB sample for m_ch ≤ 3.08 and the HMT sample for m_ch > 3.08.

The two-dimensional dependence on m_ch and k_T for p_T > 500 MeV for the source radius, R, obtained from the exponential fit to the R₂(Q) correlation functions using the MB sample for m_ch ≤ 3.08 and the HMT sample for m_ch > 3.08.

The parameter λ for p_T > 500 MeV as a function of k_T in selected low m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter λ for p_T > 500 MeV as a function of k_T in selected low m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter λ for p_T > 500 MeV as a function of k_T in selected high m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter λ for p_T > 500 MeV as a function of k_T in selected high m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter λ for p_T > 500 MeV as a function of m_ch in k_T intervals between 0.5 and 1.5 GeV. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter λ for p_T > 500 MeV as a function of m_ch in k_T intervals between 0.5 and 1.5 GeV. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 500 MeV as a function of k_T in selected low m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 500 MeV as a function of k_T in selected low m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 500 MeV as a function of k_T in selected high m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 500 MeV as a function of k_T in selected high m_ch intervals. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 500 MeV as a function of m_ch in k_T intervals between 0.5 and 1.5 GeV. The error bars and boxes represent the statistical and systematic contributions, respectively.

The parameter R for p_T > 500 MeV as a function of m_ch in k_T intervals between 0.5 and 1.5 GeV. The error bars and boxes represent the statistical and systematic contributions, respectively.

ATLAS and CMS results for the source radius R as a function of n_ch in pp interactions at 13 TeV. The CMS results (open circles) have been adjusted (by the CMS collaboration) to the ATLAS kinematic region∶ p_T > 100 MeV and |η|<2.5. The ATLAS uncertainties are the sum in quadrature of the statistical and asymmetric systematic uncertainties. For CMS, only the systematic uncertainties are shown since the statistical uncertainties are smaller than the marker size. The dashed blue (ATLAS) and black (CMS) lines represent the fit to ∛n_ch at low multiplicity, continued as dotted lines beyond the fit range. The solid green (ATLAS) and broken black (CMS) lines indicate the plateau level at high multiplicity.

ATLAS and CMS results for the source radius R as a function of n_ch in pp interactions at 13 TeV. The CMS results (open circles) have been adjusted (by the CMS collaboration) to the ATLAS kinematic region∶ p_T > 100 MeV and |η|<2.5. The ATLAS uncertainties are the sum in quadrature of the statistical and asymmetric systematic uncertainties. For CMS, only the systematic uncertainties are shown since the statistical uncertainties are smaller than the marker size. The dashed blue (ATLAS) and black (CMS) lines represent the fit to ∛n_ch at low multiplicity, continued as dotted lines beyond the fit range. The solid green (ATLAS) and broken black (CMS) lines indicate the plateau level at high multiplicity.

ATLAS and CMS results for the source radius R as a function of n_ch in pp interactions at 13 TeV. The CMS results (open circles) have been adjusted (by the CMS collaboration) to the ATLAS kinematic region∶ p_T > 100 MeV and |η|<2.5. The ATLAS uncertainties are the sum in quadrature of the statistical and asymmetric systematic uncertainties. For CMS, only the systematic uncertainties are shown since the statistical uncertainties are smaller than the marker size. The dashed blue (ATLAS) and black (CMS) lines represent the fit to ∛n_ch at low multiplicity, continued as dotted lines beyond the fit range. The solid green (ATLAS) and broken black (CMS) lines indicate the plateau level at high multiplicity.

ATLAS and CMS results for the source radius R as a function of ∛n_ch in pp interactions at 13 TeV. The CMS results (open circles) have been adjusted (by the CMS collaboration) to the ATLAS kinematic region∶ p_T > 100 MeV and |η|<2.5. The ATLAS uncertainties are the sum in quadrature of the statistical and asymmetric systematic uncertainties. For CMS, only the systematic uncertainties are shown since the statistical uncertainties are smaller than the marker size. The dashed blue (ATLAS) and black (CMS) lines represent the fit to ∛n_ch at low multiplicity, continued as dotted lines beyond the fit range. The solid green (ATLAS) and broken black (CMS) lines indicate the plateau level at high multiplicity.

ATLAS and CMS results for the source radius R as a function of ∛n_ch in pp interactions at 13 TeV. The CMS results (open circles) have been adjusted (by the CMS collaboration) to the ATLAS kinematic region∶ p_T > 100 MeV and |η|<2.5. The ATLAS uncertainties are the sum in quadrature of the statistical and asymmetric systematic uncertainties. For CMS, only the systematic uncertainties are shown since the statistical uncertainties are smaller than the marker size. The dashed blue (ATLAS) and black (CMS) lines represent the fit to ∛n_ch at low multiplicity, continued as dotted lines beyond the fit range. The solid green (ATLAS) and broken black (CMS) lines indicate the plateau level at high multiplicity.

ATLAS and CMS results for the source radius R as a function of ∛n_ch in pp interactions at 13 TeV. The CMS results (open circles) have been adjusted (by the CMS collaboration) to the ATLAS kinematic region∶ p_T > 100 MeV and |η|<2.5. The ATLAS uncertainties are the sum in quadrature of the statistical and asymmetric systematic uncertainties. For CMS, only the systematic uncertainties are shown since the statistical uncertainties are smaller than the marker size. The dashed blue (ATLAS) and black (CMS) lines represent the fit to ∛n_ch at low multiplicity, continued as dotted lines beyond the fit range. The solid green (ATLAS) and broken black (CMS) lines indicate the plateau level at high multiplicity.

Systematic uncertainties (in percent) in the correlation strength, λ, and source radius, R, for the exponential fit of the two-particle double-ratio correlation functions, R₂(Q), for p_T > 100 MeV at √s= 13 TeV for the MB and HMT events. The choice of MC generator gives rise to asymmetric uncertainties, denoted by uparrow and downarrow. This asymmetry propagates through to the cumulative uncertainty. The columns under ‘Uncertainty range’ show the range of systematic uncertainty from the fits in the various n_ch intervals.

The results of the fits to the dependencies of the correlation strength, λ, and source radius, R, on the average rescaled charged-particle multiplicity, m_ch, for |η| < 2.5 and both p_T > 100 MeV and p_T > 500 MeV at √s = 13 TeV for the minimum-bias (MB) and the high-multiplicity track (HMT) events. The parameters γ and δ resulting from a joint fit to the MB and HMT data are presented. The total uncertainties are shown.

The results of the fits to the dependencies of the correlation strength, λ, and source radius, R, on the pair average transverse momentum, k_T, for various functional forms and for minimum-bias (MB) and high-multiplicity track (HMT) events for p_T > 100 MeV and p_T > 500 MeV at √s = 13 TeV. The total uncertainties are shown.

The Bose-Einstein correlation (BEC) parameters λ and R as a function of n_ch and k_T using different MC generators in the calculation of R₂(Q). (a) λ versus n_ch for MB events, (b) λ versus n_ch for HMT events, (c) λ versus k_T and (d) R versus k_T for MB events. The uncertainties shown are statistical. The lower panel of each plot shows the ratio of the BEC parameters obtained using EPOS LHC (red circles), Pythia 8 Monash (blue squares) and Herwig++ UE-EE-5 (green triangles) compared with the parameters obtained using Pythia 8 A2. The gray band in the lower panels is the MC systematic uncertainty, obtained as explained in the text.

The Bose-Einstein correlation (BEC) parameters λ and R as a function of n_ch and k_T using different MC generators in the calculation of R₂(Q). (a) λ versus n_ch for MB events, (b) λ versus n_ch for HMT events, (c) λ versus k_T and (d) R versus k_T for MB events. The uncertainties shown are statistical. The lower panel of each plot shows the ratio of the BEC parameters obtained using EPOS LHC (red circles), Pythia 8 Monash (blue squares) and Herwig++ UE-EE-5 (green triangles) compared with the parameters obtained using Pythia 8 A2. The gray band in the lower panels is the MC systematic uncertainty, obtained as explained in the text.

The Bose-Einstein correlation (BEC) parameters λ and R as a function of n_ch and k_T using different MC generators in the calculation of R₂(Q). (a) λ versus n_ch for MB events, (b) λ versus n_ch for HMT events, (c) λ versus k_T and (d) R versus k_T for MB events. The uncertainties shown are statistical. The lower panel of each plot shows the ratio of the BEC parameters obtained using EPOS LHC (red circles), Pythia 8 Monash (blue squares) and Herwig++ UE-EE-5 (green triangles) compared with the parameters obtained using Pythia 8 A2. The gray band in the lower panels is the MC systematic uncertainty, obtained as explained in the text.

The Bose-Einstein correlation (BEC) parameters λ and R as a function of n_ch and k_T using different MC generators in the calculation of R₂(Q). (a) λ versus n_ch for MB events, (b) λ versus n_ch for HMT events, (c) λ versus k_T and (d) R versus k_T for MB events. The uncertainties shown are statistical. The lower panel of each plot shows the ratio of the BEC parameters obtained using EPOS LHC (red circles), Pythia 8 Monash (blue squares) and Herwig++ UE-EE-5 (green triangles) compared with the parameters obtained using Pythia 8 A2. The gray band in the lower panels is the MC systematic uncertainty, obtained as explained in the text.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 10, (b) 11 < n_ch ≤ 20, (c) 21 < n_ch ≤ 30, (d) 31 < n_ch ≤ 40, (e) 41 < n_ch ≤ 50, (f) 51 < n_ch ≤ 60, (g) 61 < n_ch ≤ 70, (h) 71 < n_ch ≤ 80 and (i) 81 < n_ch ≤ 90. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 10, (b) 11 < n_ch ≤ 20, (c) 21 < n_ch ≤ 30, (d) 31 < n_ch ≤ 40, (e) 41 < n_ch ≤ 50, (f) 51 < n_ch ≤ 60, (g) 61 < n_ch ≤ 70, (h) 71 < n_ch ≤ 80 and (i) 81 < n_ch ≤ 90. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 10, (b) 11 < n_ch ≤ 20, (c) 21 < n_ch ≤ 30, (d) 31 < n_ch ≤ 40, (e) 41 < n_ch ≤ 50, (f) 51 < n_ch ≤ 60, (g) 61 < n_ch ≤ 70, (h) 71 < n_ch ≤ 80 and (i) 81 < n_ch ≤ 90. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 10, (b) 11 < n_ch ≤ 20, (c) 21 < n_ch ≤ 30, (d) 31 < n_ch ≤ 40, (e) 41 < n_ch ≤ 50, (f) 51 < n_ch ≤ 60, (g) 61 < n_ch ≤ 70, (h) 71 < n_ch ≤ 80 and (i) 81 < n_ch ≤ 90. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 10, (b) 11 < n_ch ≤ 20, (c) 21 < n_ch ≤ 30, (d) 31 < n_ch ≤ 40, (e) 41 < n_ch ≤ 50, (f) 51 < n_ch ≤ 60, (g) 61 < n_ch ≤ 70, (h) 71 < n_ch ≤ 80 and (i) 81 < n_ch ≤ 90. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 10, (b) 11 < n_ch ≤ 20, (c) 21 < n_ch ≤ 30, (d) 31 < n_ch ≤ 40, (e) 41 < n_ch ≤ 50, (f) 51 < n_ch ≤ 60, (g) 61 < n_ch ≤ 70, (h) 71 < n_ch ≤ 80 and (i) 81 < n_ch ≤ 90. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 10, (b) 11 < n_ch ≤ 20, (c) 21 < n_ch ≤ 30, (d) 31 < n_ch ≤ 40, (e) 41 < n_ch ≤ 50, (f) 51 < n_ch ≤ 60, (g) 61 < n_ch ≤ 70, (h) 71 < n_ch ≤ 80 and (i) 81 < n_ch ≤ 90. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 10, (b) 11 < n_ch ≤ 20, (c) 21 < n_ch ≤ 30, (d) 31 < n_ch ≤ 40, (e) 41 < n_ch ≤ 50, (f) 51 < n_ch ≤ 60, (g) 61 < n_ch ≤ 70, (h) 71 < n_ch ≤ 80 and (i) 81 < n_ch ≤ 90. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 10, (b) 11 < n_ch ≤ 20, (c) 21 < n_ch ≤ 30, (d) 31 < n_ch ≤ 40, (e) 41 < n_ch ≤ 50, (f) 51 < n_ch ≤ 60, (g) 61 < n_ch ≤ 70, (h) 71 < n_ch ≤ 80 and (i) 81 < n_ch ≤ 90. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 91 < n_ch ≤ 100, (b) 101 < n_ch ≤ 125, (c) 126 < n_ch ≤ 150, (d) 151 < n_ch ≤ 200, (e) 201 < n_ch ≤ 250. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 91 < n_ch ≤ 100, (b) 101 < n_ch ≤ 125, (c) 126 < n_ch ≤ 150, (d) 151 < n_ch ≤ 200, (e) 201 < n_ch ≤ 250. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 91 < n_ch ≤ 100, (b) 101 < n_ch ≤ 125, (c) 126 < n_ch ≤ 150, (d) 151 < n_ch ≤ 200, (e) 201 < n_ch ≤ 250. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 91 < n_ch ≤ 100, (b) 101 < n_ch ≤ 125, (c) 126 < n_ch ≤ 150, (d) 151 < n_ch ≤ 200, (e) 201 < n_ch ≤ 250. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 91 < n_ch ≤ 100, (b) 101 < n_ch ≤ 125, (c) 126 < n_ch ≤ 150, (d) 151 < n_ch ≤ 200, (e) 201 < n_ch ≤ 250. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 101 < n_ch ≤ 110, (b) 111 < n_ch ≤ 120, (c) 121 < n_ch ≤ 130, (d) 131 < n_ch ≤ 140, (e) 141 < n_ch ≤ 155, (f) 156 < n_ch ≤ 175, (g) 176 < n_ch ≤ 200, (h) 201 < n_ch ≤ 230 and (i) 231 < n_ch ≤ 300. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 101 < n_ch ≤ 110, (b) 111 < n_ch ≤ 120, (c) 121 < n_ch ≤ 130, (d) 131 < n_ch ≤ 140, (e) 141 < n_ch ≤ 155, (f) 156 < n_ch ≤ 175, (g) 176 < n_ch ≤ 200, (h) 201 < n_ch ≤ 230 and (i) 231 < n_ch ≤ 300. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 101 < n_ch ≤ 110, (b) 111 < n_ch ≤ 120, (c) 121 < n_ch ≤ 130, (d) 131 < n_ch ≤ 140, (e) 141 < n_ch ≤ 155, (f) 156 < n_ch ≤ 175, (g) 176 < n_ch ≤ 200, (h) 201 < n_ch ≤ 230 and (i) 231 < n_ch ≤ 300. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 101 < n_ch ≤ 110, (b) 111 < n_ch ≤ 120, (c) 121 < n_ch ≤ 130, (d) 131 < n_ch ≤ 140, (e) 141 < n_ch ≤ 155, (f) 156 < n_ch ≤ 175, (g) 176 < n_ch ≤ 200, (h) 201 < n_ch ≤ 230 and (i) 231 < n_ch ≤ 300. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 101 < n_ch ≤ 110, (b) 111 < n_ch ≤ 120, (c) 121 < n_ch ≤ 130, (d) 131 < n_ch ≤ 140, (e) 141 < n_ch ≤ 155, (f) 156 < n_ch ≤ 175, (g) 176 < n_ch ≤ 200, (h) 201 < n_ch ≤ 230 and (i) 231 < n_ch ≤ 300. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 101 < n_ch ≤ 110, (b) 111 < n_ch ≤ 120, (c) 121 < n_ch ≤ 130, (d) 131 < n_ch ≤ 140, (e) 141 < n_ch ≤ 155, (f) 156 < n_ch ≤ 175, (g) 176 < n_ch ≤ 200, (h) 201 < n_ch ≤ 230 and (i) 231 < n_ch ≤ 300. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 101 < n_ch ≤ 110, (b) 111 < n_ch ≤ 120, (c) 121 < n_ch ≤ 130, (d) 131 < n_ch ≤ 140, (e) 141 < n_ch ≤ 155, (f) 156 < n_ch ≤ 175, (g) 176 < n_ch ≤ 200, (h) 201 < n_ch ≤ 230 and (i) 231 < n_ch ≤ 300. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 101 < n_ch ≤ 110, (b) 111 < n_ch ≤ 120, (c) 121 < n_ch ≤ 130, (d) 131 < n_ch ≤ 140, (e) 141 < n_ch ≤ 155, (f) 156 < n_ch ≤ 175, (g) 176 < n_ch ≤ 200, (h) 201 < n_ch ≤ 230 and (i) 231 < n_ch ≤ 300. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 101 < n_ch ≤ 110, (b) 111 < n_ch ≤ 120, (c) 121 < n_ch ≤ 130, (d) 131 < n_ch ≤ 140, (e) 141 < n_ch ≤ 155, (f) 156 < n_ch ≤ 175, (g) 176 < n_ch ≤ 200, (h) 201 < n_ch ≤ 230 and (i) 231 < n_ch ≤ 300. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), for the high-multiplicity track (HMT) events using the unlike-charge particle (UCP) pairs reference sample for k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 9, (b) 10 < n_ch ≤ 18, (c) 19 < n_ch ≤ 27, (d) 28 < n_ch ≤ 36, (e) 37 < n_ch ≤ 45, (f) 46 < n_ch ≤ 54, (g) 55 < n_ch ≤ 63, (h) 64 < n_ch ≤ 72, (i) 73 < n_ch ≤ 81, (j) 82 < n_ch ≤ 90, (k) 91 < n_ch ≤ 113, and (l) 114 < n_ch ≤ 136. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 9, (b) 10 < n_ch ≤ 18, (c) 19 < n_ch ≤ 27, (d) 28 < n_ch ≤ 36, (e) 37 < n_ch ≤ 45, (f) 46 < n_ch ≤ 54, (g) 55 < n_ch ≤ 63, (h) 64 < n_ch ≤ 72, (i) 73 < n_ch ≤ 81, (j) 82 < n_ch ≤ 90, (k) 91 < n_ch ≤ 113, and (l) 114 < n_ch ≤ 136. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 9, (b) 10 < n_ch ≤ 18, (c) 19 < n_ch ≤ 27, (d) 28 < n_ch ≤ 36, (e) 37 < n_ch ≤ 45, (f) 46 < n_ch ≤ 54, (g) 55 < n_ch ≤ 63, (h) 64 < n_ch ≤ 72, (i) 73 < n_ch ≤ 81, (j) 82 < n_ch ≤ 90, (k) 91 < n_ch ≤ 113, and (l) 114 < n_ch ≤ 136. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 9, (b) 10 < n_ch ≤ 18, (c) 19 < n_ch ≤ 27, (d) 28 < n_ch ≤ 36, (e) 37 < n_ch ≤ 45, (f) 46 < n_ch ≤ 54, (g) 55 < n_ch ≤ 63, (h) 64 < n_ch ≤ 72, (i) 73 < n_ch ≤ 81, (j) 82 < n_ch ≤ 90, (k) 91 < n_ch ≤ 113, and (l) 114 < n_ch ≤ 136. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 9, (b) 10 < n_ch ≤ 18, (c) 19 < n_ch ≤ 27, (d) 28 < n_ch ≤ 36, (e) 37 < n_ch ≤ 45, (f) 46 < n_ch ≤ 54, (g) 55 < n_ch ≤ 63, (h) 64 < n_ch ≤ 72, (i) 73 < n_ch ≤ 81, (j) 82 < n_ch ≤ 90, (k) 91 < n_ch ≤ 113, and (l) 114 < n_ch ≤ 136. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 9, (b) 10 < n_ch ≤ 18, (c) 19 < n_ch ≤ 27, (d) 28 < n_ch ≤ 36, (e) 37 < n_ch ≤ 45, (f) 46 < n_ch ≤ 54, (g) 55 < n_ch ≤ 63, (h) 64 < n_ch ≤ 72, (i) 73 < n_ch ≤ 81, (j) 82 < n_ch ≤ 90, (k) 91 < n_ch ≤ 113, and (l) 114 < n_ch ≤ 136. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 9, (b) 10 < n_ch ≤ 18, (c) 19 < n_ch ≤ 27, (d) 28 < n_ch ≤ 36, (e) 37 < n_ch ≤ 45, (f) 46 < n_ch ≤ 54, (g) 55 < n_ch ≤ 63, (h) 64 < n_ch ≤ 72, (i) 73 < n_ch ≤ 81, (j) 82 < n_ch ≤ 90, (k) 91 < n_ch ≤ 113, and (l) 114 < n_ch ≤ 136. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 9, (b) 10 < n_ch ≤ 18, (c) 19 < n_ch ≤ 27, (d) 28 < n_ch ≤ 36, (e) 37 < n_ch ≤ 45, (f) 46 < n_ch ≤ 54, (g) 55 < n_ch ≤ 63, (h) 64 < n_ch ≤ 72, (i) 73 < n_ch ≤ 81, (j) 82 < n_ch ≤ 90, (k) 91 < n_ch ≤ 113, and (l) 114 < n_ch ≤ 136. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 9, (b) 10 < n_ch ≤ 18, (c) 19 < n_ch ≤ 27, (d) 28 < n_ch ≤ 36, (e) 37 < n_ch ≤ 45, (f) 46 < n_ch ≤ 54, (g) 55 < n_ch ≤ 63, (h) 64 < n_ch ≤ 72, (i) 73 < n_ch ≤ 81, (j) 82 < n_ch ≤ 90, (k) 91 < n_ch ≤ 113, and (l) 114 < n_ch ≤ 136. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 9, (b) 10 < n_ch ≤ 18, (c) 19 < n_ch ≤ 27, (d) 28 < n_ch ≤ 36, (e) 37 < n_ch ≤ 45, (f) 46 < n_ch ≤ 54, (g) 55 < n_ch ≤ 63, (h) 64 < n_ch ≤ 72, (i) 73 < n_ch ≤ 81, (j) 82 < n_ch ≤ 90, (k) 91 < n_ch ≤ 113, and (l) 114 < n_ch ≤ 136. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 9, (b) 10 < n_ch ≤ 18, (c) 19 < n_ch ≤ 27, (d) 28 < n_ch ≤ 36, (e) 37 < n_ch ≤ 45, (f) 46 < n_ch ≤ 54, (g) 55 < n_ch ≤ 63, (h) 64 < n_ch ≤ 72, (i) 73 < n_ch ≤ 81, (j) 82 < n_ch ≤ 90, (k) 91 < n_ch ≤ 113, and (l) 114 < n_ch ≤ 136. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample for n_ch - intervals∶ (a) 2 < n_ch ≤ 9, (b) 10 < n_ch ≤ 18, (c) 19 < n_ch ≤ 27, (d) 28 < n_ch ≤ 36, (e) 37 < n_ch ≤ 45, (f) 46 < n_ch ≤ 54, (g) 55 < n_ch ≤ 63, (h) 64 < n_ch ≤ 72, (i) 73 < n_ch ≤ 81, (j) 82 < n_ch ≤ 90, (k) 91 < n_ch ≤ 113, and (l) 114 < n_ch ≤ 136. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The single-ratio two-particle correlation functions, C₂^data(Q), at 7 TeV for the minimum-bias (MB) events using the unlike-charge particle (UCP) pairs reference sample k_T - intervals∶ (a) 100 < k_T ≤ 200 MeV, (b) 200 < k_T ≤ 300 MeV, (c) 300 < k_T ≤ 400 MeV, (d) 400 < k_T ≤ 500 MeV, (e) 500 < k_T ≤ 600 MeV, (f) 600 < k_T ≤ 700 MeV, (g) 700 < k_T ≤ 1000 MeV, and (h) 1000 < k_T ≤ 1500 MeV. The error bars represent the statistical uncertainties. The boxes represent the systematic uncertainties, which are the sum in quadrature of a variation of the Coulomb correction, the track reconstruction efficiency and the unfolding matrix.

The correlation strength, λ, and source radius, R, of the exponential fits to the two-particle double-ratio correlation functions, R₂(Q), in dependence on the multiplicity, m_ch, intervals for the minimum-bias (MB) and the high-multiplicity track (HMT) events for p_T > 100 MeV at √s = 13 TeV. Statistical uncertainties for √χ²/ndf>1 are corrected by the √χ²/ndf. The total uncertainties are shown.

The correlation strength, λ, and source radius, R, of the exponential fits to the two-particle double-ratio correlation functions, R₂(Q), in dependence on the multiplicity, m_ch, intervals for the minimum-bias (MB) and the high-multiplicity track (HMT) events for p_T > 500 MeV at √s = 13 TeV. Statistical uncertainties for √χ²/ndf>1 are corrected by the √χ²/ndf. The total uncertainties are shown.

The correlation strength, λ, and source radius, R, of the exponential fits to the two-particle double-ratio correlation functions, R₂(Q), in dependence on the pair transverse momentum, k_T, intervals for the minimum-bias (MB) and the high-multiplicity track (HMT) events for p_T > 100 MeV at √s = 13 TeV. Statistical uncertainties for √χ²/ndf>1 are corrected by the √χ²/ndf. The total uncertainties are shown.

The correlation strength, λ, and source radius, R, of the exponential fits to the two-particle double-ratio correlation functions, R₂(Q), in dependence on the pair transverse momentum, k_T, intervals for the minimum-bias (MB) and the high-multiplicity track (HMT) events for p_T > 500 MeV at √s = 13 TeV. Statistical uncertainties for √χ²/ndf>1 are corrected by the √χ²/ndf. The total uncertainties are shown.

The 95% CL upper limit on the production cross section for charge 5 particles.

The 95% CL upper limit on the production cross section for charge 6 particles.

Mean value of N(C=CHARGED) v jet PT for R=0.8.

Mean value of N(C=CHARGED) v jet PT for R=1.0.

Mean value of PT(C=AVERAGE) v jet PT for R=0.2.

Mean value of PT(C=AVERAGE) v jet PT for R=0.4.

Mean value of PT(C=AVERAGE) v jet PT for R=0.6.

Mean value of PT(C=AVERAGE) v jet PT for R=0.8.

Mean value of PT(C=AVERAGE) v jet PT for R=1.0.

Mean value of SUM(PT) v jet PT for R=0.2.

Mean value of SUM(PT) v jet PT for R=0.4.

Mean value of SUM(PT) v jet PT for R=0.6.

Mean value of SUM(PT) v jet PT for R=0.8.

Mean value of SUM(PT) v jet PT for R=1.0.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 4 to 5 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 5 to 6 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 6 to 8 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 8 to 11 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 11 to 14 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 14 to 19 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 19 to 24 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 24 to 31 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 31 to 50 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 50 to 100 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 4 to 5 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 5 to 6 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 6 to 8 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 8 to 11 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 11 to 14 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 14 to 19 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 19 to 24 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 24 to 31 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 31 to 50 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 50 to 100 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 4 to 5 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 5 to 6 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 6 to 8 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 8 to 11 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 11 to 14 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 14 to 19 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 19 to 24 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 24 to 31 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 31 to 50 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 50 to 100 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 4 to 5 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 5 to 6 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 6 to 8 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 8 to 11 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 11 to 14 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 14 to 19 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 19 to 24 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 24 to 31 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 31 to 50 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 50 to 100 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 4 to 5 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 5 to 6 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 6 to 8 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 8 to 11 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 11 to 14 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 14 to 19 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 19 to 24 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 24 to 31 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 31 to 50 GeV.

Distribution of the variable N(C=CHARGED) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 50 to 100 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 4 to 5 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 5 to 6 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 6 to 8 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 8 to 11 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 11 to 14 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 14 to 19 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 19 to 24 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 24 to 31 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 31 to 50 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 50 to 100 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 4 to 5 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 5 to 6 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 6 to 8 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 8 to 11 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 11 to 14 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 14 to 19 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 19 to 24 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 24 to 31 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 31 to 50 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 50 to 100 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 4 to 5 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 5 to 6 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 6 to 8 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 8 to 11 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 11 to 14 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 14 to 19 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 19 to 24 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 24 to 31 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 31 to 50 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 50 to 100 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 4 to 5 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 5 to 6 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 6 to 8 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 8 to 11 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 11 to 14 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 14 to 19 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 19 to 24 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 24 to 31 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 31 to 50 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 50 to 100 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 4 to 5 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 5 to 6 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 6 to 8 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 8 to 11 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 11 to 14 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 14 to 19 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 19 to 24 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 24 to 31 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 31 to 50 GeV.

Distribution of the variable PT(C=AVERAGE) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 50 to 100 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 4 to 5 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 5 to 6 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 6 to 8 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 8 to 11 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 11 to 14 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 14 to 19 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 19 to 24 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 24 to 31 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 31 to 50 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.2 and jet PT in the range 50 to 100 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 4 to 5 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 5 to 6 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 6 to 8 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 8 to 11 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 11 to 14 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 14 to 19 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 19 to 24 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 24 to 31 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 31 to 50 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.4 and jet PT in the range 50 to 100 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 4 to 5 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 5 to 6 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 6 to 8 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 8 to 11 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 11 to 14 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 14 to 19 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 19 to 24 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 24 to 31 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 31 to 50 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.6 and jet PT in the range 50 to 100 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 4 to 5 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 5 to 6 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 6 to 8 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 8 to 11 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 11 to 14 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 14 to 19 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 19 to 24 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 24 to 31 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 31 to 50 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=0.8 and jet PT in the range 50 to 100 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 4 to 5 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 5 to 6 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 6 to 8 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 8 to 11 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 11 to 14 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 14 to 19 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 19 to 24 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 24 to 31 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 31 to 50 GeV.

Distribution of the variable SUM(PT) in the AWAY and TRANSVERSE regions for R=1.0 and jet PT in the range 50 to 100 GeV.

$\sum E_{\perp}$ for the minimum bias selection, $0.8 < |\eta| < 1.6$.

$\sum E_{\perp}$ for the minimum bias selection, $1.6 < |\eta| < 2.4$.

$\sum E_{\perp}$ for the minimum bias selection, $2.4 < |\eta| < 3.2$.

$\sum E_{\perp}$ for the minimum bias selection, $3.2 < |\eta| < 4.0$.

$\sum E_{\perp}$ for the minimum bias selection, $4.0 < |\eta| < 4.8$.

$\sum E_{\perp}$ for the dijet selection, $0.0 < |\eta| < 0.8$.

$\sum E_{\perp}$ for the dijet selection, $0.8 < |\eta| < 1.6$.

$\sum E_{\perp}$ for the dijet selection, $1.6 < |\eta| < 2.4$.

$\sum E_{\perp}$ for the dijet selection, $2.4 < |\eta| < 3.2$.

$\sum E_{\perp}$ for the dijet selection, $3.2 < |\eta| < 4.0$.

$\sum E_{\perp}$ for the dijet selection, $4.0 < |\eta| < 4.8$.

Normalized distributions of Tranverse Thrust Minor for 5 lower limit values of leading particle PT.

Normalized distributions of Tranverse Sphericity for 4 ranges of leading particle PT.

Normalized distributions of Tranverse Sphericity for 5 lower limit values of leading particle PT.

Mean Values of Thrust, Thrust Minor and Sphericity verses Multiplicity.

Mean Values of Thrust, Thrust Minor and Sphericity verses charged particle PT scalar sum.

Charged particle multiplicity distribution for hard QCD events in the full pseudorapidity range. The first quoted uncertainty is statistical and the second is systematic.

Charged particle density as function of pseudorapidity ($\eta$) for minimum bias events in $-2.0 < \eta < -2.5$. Minimum bias events are required to have at least one prompt final state charged particle in fiducial range $2.0 < \eta < 4.5$. Only total uncertainties are listed.

Charged particle density as function of pseudorapidity($\eta$) for minimum bias events in $2.0 < \eta < 4.5$. Minimum bias events are required to have at least one prompt final state charged particle in fiducial range $2.0 < \eta < 4.5$. Only total uncertainties are listed.

Charged particle density as function of pseudorapidity ($\eta$) for hard QCD events in $-2.0 < \eta < -2.5$. Hard QCD events are required to have at least one prompt final state charged particle in fiducial range $2.5 < \eta < 4.5$ with $p_\perp > 1.0$ GeV/c. Only total uncertainties are listed.

Charged particle density as function of pseudorapidity ($\eta$) for hard QCD events in $2.0 < \eta < 4.5$. Hard QCD events are required to have at least one prompt final state charged particle in fiducial range $2.5 < \eta < 4.5$ with $p_\perp > 1.0$ GeV/c. Only total uncertainties are listed.

Charged particle fragmentation function in the jet-Pt range 80 TO 110 GeV.

Charged particle fragmentation function in the jet-Pt range 110 TO 160 GeV.

Charged particle fragmentation function in the jet-Pt range 160 TO 210 GeV.

Charged particle fragmentation function in the jet-Pt range 210 TO 260 GeV.

Charged particle fragmentation function in the jet-Pt range 260 TO 310 GeV.

Charged particle fragmentation function in the jet-Pt range 310 TO 400 GeV.

Charged particle fragmentation function in the jet-Pt range 400 TO 500 GeV.

Charged particle Rho distribution in the jet-Pt range 25 TO 40 GeV.

Charged particle Rho distribution in the jet-Pt range 40 TO 60 GeV.

Charged particle Rho distribution in the jet-Pt range 60 TO 80 GeV.

Charged particle Rho distribution in the jet-Pt range 80 TO 110 GeV.

Charged particle Rho distribution in the jet-Pt range 110 TO 160 GeV.

Charged particle Rho distribution in the jet-Pt range 160 TO 210 GeV.

Charged particle Rho distribution in the jet-Pt range 210 TO 260 GeV.

Charged particle Rho distribution in the jet-Pt range 260 TO 310 GeV.

Charged particle Rho distribution in the jet-Pt range 310 TO 400 GeV.

Charged particle Rho distribution in the jet-Pt range 400 TO 500 GeV.

Charged particle ptRel distribution in the jet-Pt range 25 TO 40 GeV.

Charged particle ptRel distribution in the jet-Pt range 40 TO 60 GeV.

Charged particle ptRel distribution in the jet-Pt range 60 TO 80 GeV.

Charged particle ptRel distribution in the jet-Pt range 80 TO 110 GeV.

Charged particle ptRel distribution in the jet-Pt range 110 TO 160 GeV.

Charged particle ptRel distribution in the jet-Pt range 160 TO 210 GeV.

Charged particle ptRel distribution in the jet-Pt range 210 TO 260 GeV.

Charged particle ptRel distribution in the jet-Pt range 260 TO 310 GeV.

Charged particle ptRel distribution in the jet-Pt range 310 TO 400 GeV.

Charged particle ptRel distribution in the jet-Pt range 400 TO 500 GeV.

Double differential cross sections for charged particle jets as a function of the jet PT in the |rapidity| range 1.5-1.9, shown separately for the two R values. The first (sys) errors is the correlated efficiency uncertainty and the second (sys) error is the correlated vetex splitting uncertainty. The third (sys) error is the quadratic sum of all the uncorrelated systematic uncertainties.

Multiplicity of charged particles per jet in the |rapidity| range 0.0-1.9 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.0-1.9 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.0-1.9 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.0-1.9 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.0-1.9 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.0-0.5 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.0-0.5 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.0-0.5 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.0-0.5 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.0-0.5 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.5-1.0 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.5-1.0 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.5-1.0 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.5-1.0 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 0.5-1.0 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 1.0-1.5 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 1.0-1.5 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 1.0-1.5 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 1.0-1.5 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 1.0-1.5 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 1.5-1.9 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 1.5-1.9 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 1.5-1.9 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 1.5-1.9 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Multiplicity of charged particles per jet in the |rapidity| range 1.5-1.9 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.0-1.9 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.0-1.9 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.0-1.9 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.0-1.9 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.0-1.9 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.0-0.5 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.0-0.5 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.0-0.5 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.0-0.5 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.0-0.5 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.5-1.0 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.5-1.0 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.5-1.0 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.5-1.0 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 0.5-1.0 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 1.0-1.5 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 1.0-1.5 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 1.0-1.5 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 1.0-1.5 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 1.0-1.5 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 1.5-1.9 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 1.5-1.9 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 1.5-1.9 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 1.5-1.9 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the fragmentation variable Z in the |rapidity| range 1.5-1.9 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.0-1.9 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.0-1.9 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.0-1.9 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.0-1.9 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.0-1.9 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.0-0.5 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.0-0.5 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.0-0.5 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.0-0.5 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.0-0.5 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.5-1.0 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.5-1.0 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.5-1.0 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.5-1.0 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 0.5-1.0 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 1.0-1.5 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 1.0-1.5 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 1.0-1.5 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 1.0-1.5 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 1.0-1.5 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 1.5-1.9 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 1.5-1.9 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 1.5-1.9 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 1.5-1.9 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle PT(rel) wrt anti-kt jets in the |rapidity| range 1.5-1.9 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.0-1.9 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.0-1.9 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.0-1.9 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.0-1.9 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.0-1.9 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.0-0.5 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.0-0.5 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.0-0.5 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.0-0.5 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.0-0.5 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.5-1.0 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.5-1.0 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.5-1.0 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.5-1.0 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 0.5-1.0 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 1.0-1.5 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 1.0-1.5 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 1.0-1.5 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 1.0-1.5 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 1.0-1.5 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 1.5-1.9 and transverse momentum 4-6 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 1.5-1.9 and transverse momentum 6-10 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 1.5-1.9 and transverse momentum 10-15 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 1.5-1.9 and transverse momentum 15-24 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the charged particle number density RHO in the |rapidity| range 1.5-1.9 and transverse momentum 24-40 GeV shown separately for the two different jet radius parameter (R) values of 0.4 and 0.6.

Distribution of the heavy particle Mass estimated from the Tile Calorimeter data plus the simulated background and model estimates for three gluino masses. A cut of BETA < 1 is imposed.;.

Distribution of the heavy particle Mass estimated from the Pixel detector data plus the data driven background and model estimates for two gluino masses.;.

Distribution of the heavy particle Mass estimated from the Tile Calorimeter data plus the data driven background and model estimates for two gluino masses.;.