Showing 10 of 303 results
This Letter presents the first study of Higgs boson production in association with a vector boson (V = W or Z) in the fully hadronic $qqbb$ final state using data recorded by the ATLAS detector at the LHC in proton-proton collisions at $\sqrt{s}=13$ TeV and corresponding to an integrated luminosity of 137 fb$^{-1}$. The vector bosons and Higgs bosons are each reconstructed as large-radius jets and tagged using jet substructure techniques. Dedicated tagging algorithms exploiting $b$-tagging properties are used to identify jets consistent with Higgs bosons decaying into $b\bar{b}$. Dominant backgrounds from multijet production are determined directly from the data, and a likelihood fit to the jet mass distribution of Higgs boson candidates is used to extract the number of signal events. The VH production cross section is measured inclusively and differentially in several ranges of Higgs boson transverse momentum: 250-450, 450-650, and greater than 650 GeV. The inclusive signal yield relative to the standard model expectation is observed to be $\mu = 1.4 ^{+1.0}_{-0.9}$ and the corresponding cross section is $3.1 \pm 1.3\, (stat.)\: ^{+1.8}_{-1.4}\, (syst.$) pb.
Higgs candidate jet mass distributions in the signal region for $p_{T,J}^H$ in [250,450) GeV obtained after the inclusive fit with a single Z+jets normalization factor and a single signal strength.
Higgs candidate jet mass distributions in the signal region for $p_{T,J}^H$ in [450,650) GeV obtained after the inclusive fit with a single Z+jets normalization factor and a single signal strength.
Higgs candidate jet mass distributions in the signal region for $p_{T,J}^H \geq 650$ GeV obtained after the inclusive fit with a single Z+jets normalization factor and a single signal strength.
The results of a search for gluino and squark pair production with the pairs decaying via the lightest charginos into a final state consisting of two $W$ bosons, the lightest neutralinos ($\tilde\chi^0_1$), and quarks, are presented. The signal is characterised by the presence of a single charged lepton ($e^{\pm}$ or $\mu^{\pm}$) from a $W$ boson decay, jets, and missing transverse momentum. The analysis is performed using 139 fb$^{-1}$ of proton-proton collision data taken at a centre-of-mass energy $\sqrt{s}=13$ TeV delivered by the Large Hadron Collider and recorded by the ATLAS experiment. No statistically significant excess of events above the Standard Model expectation is found. Limits are set on the direct production of squarks and gluinos in simplified models. Masses of gluino (squark) up to 2.2 TeV (1.4 TeV) are excluded at 95% confidence level for a light $\tilde\chi^0_1$.
Post-fit $m_{T}$ distribution in the SR 2J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Pre-fit $m_{eff}$ distribution in the TR6J control region. Uncertainties include statistical and systematic uncertainties (added in quadrature). The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Pre-fit $m_{eff}$ distribution in the WR6J control region. Uncertainties include statistical and systematic uncertainties (added in quadrature). The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the TR6J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the WR6J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step x = 1/2 model.
Post-fit $m_{eff}$ distribution in the 4J high-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Expected 95% CL exclusion contours for the gluino one-step x = 1/2 model. space.
Post-fit $m_{eff}$ distribution in the 4J high-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step variable-x
Post-fit $m_{eff}$ distribution in the 6J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Expected 95% CL exclusion contours for the gluino one-step variable-x
Post-fit $m_{eff}$ distribution in the 6J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Observed 95% CL exclusion contours for the gluino one-step x = 1/2 model.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the gluino one-step x = 1/2 model. space.
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Observed 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the gluino one-step variable-x
Expected 95% CL exclusion contours for the squark one-step variable-x
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-step variable-x
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Upper limits on the signal cross section for simplified model gluino one-step x = 1/2
Expected 95% CL exclusion contours for the squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step variable-x
Expected 95% CL exclusion contours for the squark one-step variable-x
Upper limits on the signal cross section for simplified model squark one-step x = 1/2
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Upper limits on the signal cross section for simplified model squark one-step variable-x
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Upper limits on the signal cross section for simplified model squark one-step x=1/2 in one-flavour schemes
Upper limits on the signal cross section for simplified model gluino one-step x = 1/2
Upper limits on the signal cross section for simplified model squark one-step variable-x in one-flavour schemes
Upper limits on the signal cross section for simplified model gluino one-step variable-x
Post-fit $m_{eff}$ distribution in the 2J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step x = 1/2
Upper limits on the signal cross section for simplified model squark one-step variable-x
Post-fit $m_{eff}$ distribution in the 2J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step x=1/2 in one-flavour schemes
Post-fit $m_{eff}$ distribution in the 4J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step variable-x in one-flavour schemes
Post-fit $m_{eff}$ distribution in the 4J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-tag validation region. Uncertainties include statistical and systematic uncertainties.
Post-fit $m_{eff}$ distribution in the TR2J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-veto validation region. Uncertainties include statistical and systematic uncertainties.
Post-fit $m_{eff}$ distribution in the WR2J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR2JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the TR4J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR2JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the WR4J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR4JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 2J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR4JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 2J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR6JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 4J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR6JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 4J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Post-fit $m_{eff}$ distribution in the 6J b-tag validation region. Uncertainties include statistical and systematic uncertainties.
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Post-fit $m_{eff}$ distribution in the 6J b-veto validation region. Uncertainties include statistical and systematic uncertainties.
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR2JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR2JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR4JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR4JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J discovery high region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR6JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J discovery low region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR6JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J discovery high region for squark production one-step variable-x simplified models
Signal efficiency in SR2J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J discovery low region for squark production one-step variable-x simplified models
Signal efficiency in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Higgs boson production via gluon-gluon fusion is measured in the $WW^{\ast} \to e\nu\mu\nu$ decay channel. The dataset utilized corresponds to an integrated luminosity of 139 fb$^{-1}$ collected by the ATLAS detector from $\sqrt{s}=13$ TeV proton-proton collisions delivered by the Large Hadron Collider between 2015 and 2018. Differential cross sections are measured in a fiducial phase space restricted to the production of at most one additional jet. The results are consistent with Standard Model expectations, derived using different Monte Carlo generators.
Measured differential fiducial cross section for $p_{T}^{H}$ in the 0+1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $m_{\ell\ell}$ in the 0+1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $Y_{\ell\ell}$ in the 0+1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $p_{T}^{\ell\ell}$ in the 0+1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $\Delta\phi_{\ell\ell}$ in the 0+1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $p_{T}^{\ell 0}$ in the 0+1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $\cos\theta^{*}$ in the 0+1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $|Y_{j0}|$ in the 0+1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $m_{\ell\ell}$ versus $N_{jet}$ in the 0-jet and 1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $\Delta\phi_{\ell\ell}$ versus $N_{jet}$ in the 0-jet and 1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $Y_{\ell\ell}$ versus $N_{jet}$ in the 0-jet and 1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $p_{T}^{\ell\ell}$ versus $N_{jet}$ in the 0-jet and 1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $p_{T}^{\ell 0}$ versus $N_{jet}$ in the 0-jet and 1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $\cos\theta^{*}$ versus $N_{jet}$ in the 0-jet and 1-jet fiducial region using the regularized in-likelihood unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $p_{T}^{H}$ in the 0+1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $m_{\ell\ell}$ in the 0+1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $Y_{\ell\ell}$ in the 0+1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $p_{T}^{\ell\ell}$ in the 0+1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $\Delta\phi_{\ell\ell}$ in the 0+1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $p_{T}^{\ell 0}$ in the 0+1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $\cos\theta^{*}$ in the 0+1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $|Y_{j0}|$ in the 0+1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $m_{\ell\ell}$ versus $N_{jet}$ in the 0-jet and 1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $\Delta\phi_{\ell\ell}$ versus $N_{jet}$ in the 0-jet and 1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $Y_{\ell\ell}$ versus $N_{jet}$ in the 0-jet and 1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $p_{T}^{\ell\ell}$ versus $N_{jet}$ in the 0-jet and 1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $p_{T}^{\ell 0}$ versus $N_{jet}$ in the 0-jet and 1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Measured differential fiducial cross section for $\cos\theta^{*}$ versus $N_{jet}$ in the 0-jet and 1-jet fiducial region using the iterative Bayesian unfolding method. The quoted uncertainties include statistical and systematic uncertainties from experimental and theory sources as well as background normalization effects and shape effects from background and signal.
Migration Matrices for $m_{\ell\ell}$
Migration Matrices for $p_{T}^{H}$
Migration Matrices for $Y_{\ell\ell}$
Migration Matrices for $p_{T}^{\ell\ell}$
Migration Matrices for $p_{T}^{\ell 0}$
Migration Matrices for $\cos\theta^{*} $
Migration Matrices for $\Delta\phi_{\ell\ell}$
Migration Matrices for $|Y_{j0}|$
Migration Matrices for $M_{\ell\ell} $ versus $ N_{jet}$
Migration Matrices for $Y_{\ell\ell} $ versus $ N_{jet}$
Migration Matrices for $p_{T}^{\ell\ell} $ versus $ N_{jet}$
Migration Matrices for $p_{T}^{\ell 0} $ versus $ N_{jet}$
Migration Matrices for $\cos\theta^{*} $ versus $ N_{jet}$
Migration Matrices for $\Delta\phi_{\ell\ell} $ versus $ N_{jet}$
Correlation Matrices for observed cross-sections for $m_{\ell\ell}$
Correlation Matrices for observed cross-sections for $p_{T}^{H}$
Correlation Matrices for observed cross-sections for $Y_{\ell\ell}$
Correlation Matrices for observed cross-sections for $p_{T}^{\ell\ell}$
Correlation Matrices for observed cross-sections for $p_{T}^{\ell 0}$
Correlation Matrices for observed cross-sections for $\cos\theta^{*} $
Correlation Matrices for observed cross-sections for $\Delta\phi_{\ell\ell}$
Correlation Matrices for observed cross-sections for $|Y_{j0}|$
Correlation Matrices for observed cross-sections for $M_{\ell\ell} $ versus $ N_{jet}$
Correlation Matrices for observed cross-sections for $Y_{\ell\ell} $ versus $ N_{jet}$
Correlation Matrices for observed cross-sections for $p_{T}^{\ell\ell} $ versus $ N_{jet}$
Correlation Matrices for observed cross-sections for $p_{T}^{\ell 0} $ versus $ N_{jet}$
Correlation Matrices for observed cross-sections for $\cos\theta^{*} $ versus $ N_{jet}$
Correlation Matrices for observed cross-sections for $\Delta\phi_{\ell\ell} $ versus $ N_{jet}$
Inclusive and differential fiducial cross sections of the Higgs boson are measured in the $H \to ZZ^{*} \to 4\ell$ ($\ell = e,\mu$) decay channel. The results are based on proton$-$proton collision data produced at the Large Hadron Collider at a centre-of-mass energy of 13 TeV and recorded by the ATLAS detector from 2015 to 2018, equivalent to an integrated luminosity of 139 fb$^{-1}$. The inclusive fiducial cross section for the $H \to ZZ^{*} \to 4\ell$ process is measured to be $\sigma_\mathrm{fid} = 3.28 \pm 0.32$ fb, in agreement with the Standard Model prediction of $\sigma_\mathrm{fid, SM} = 3.41 \pm 0.18 $ fb. Differential fiducial cross sections are measured for a variety of observables which are sensitive to the production and decay of the Higgs boson. All measurements are in agreement with the Standard Model predictions. The results are used to constrain anomalous Higgs boson interactions with Standard Model particles.
Fractional uncertainties for the inclusive fiducial and total cross sections, and range of systematic uncertainties for the differential measurements. The columns e/$\mu$ and jets represent the experimental uncertainties in lepton and jet reconstruction and identification, respectively. The Z + jets, $t\bar{t}$, tXX (Other Bkg.) column includes uncertainties related to the estimation of these background sources. The $ZZ^{*}$ theory ($ZZ^{*}$ th.) uncertainties include the PDF and scale variations. Signal theory (Sig th.) uncertainties include PDF choice, QCD scale, and shower modelling of the signal. Finally, the column labelled Comp. contains uncertainties related to production mode composition and unfolding bias which affect the response matrices. The uncertainties have been rounded to the nearest 0.5%, except for the luminosity uncertainty which has been measured to be 1.7%.
Expected (pre-fit) and observed number of events in the four decay final states after the event selection, in the mass range 115< $m_{4l}$ < 130 GeV. The sum of the expected number of SM Higgs boson events and the estimated background yields is compared to the data. Combined statistical and systematic uncertainties are included for the predictions.
The fiducial and total cross sections of Higgs boson production measured in the 4l final state. The fiducial cross sections are given separately for each decay final state, and for same- and different-flavour decays. The inclusive fiducial cross section is measured as the sum of all final states ($\sigma_{sum}$), as well as by combining the per-final state measurements assuming SM $ZZ^{*} \to 4l$ relative branching ratios ($\sigma_{comb}$). For the total cross section ($\sigma_{tot}$), the Higgs boson branching ratio at $m_{H}$= 125 GeV is assumed. The total SM prediction is accurate to N3LO in QCD and NLO EW for the ggF process. The cross sections for all other Higgs boson production modes XH are added. For the fiducial cross section predictions, the SM cross sections are multiplied by the acceptances determined using the NNLOPS sample for ggF. The p-values indicating the compatibility of the measurement and the SM prediction are shown as well. They do not include the systematic uncertainty in the theoretical predictions.
Correlation matrix between the fiducial cross sections for the four individual decay final states and the $ZZ^{*}$ normalisation factor.
Differential fiducial cross section for the transverse momentum $p_{T}^{4l}$ of the Higgs boson. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 . Measured value in the last bin is un upper limit at 95% CL.
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the transverse momentum $p_{T}^{4l}$ of the Higgs boson.
Differential fiducial cross section for the invariant mass $m_{12}$ of the leading Z boson. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the invariant mass $m_{12}$ of the leading Z boson.
Differential fiducial cross section for the invariant mass $m_{34}$ of the subleading Z boson. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the invariant mass $m_{34}$ of the subleading Z boson.
Differential fiducial cross section for the rapidity $|y_{4l}|$ of the Higgs boson. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the rapidity $|y_{4l}|$ of the Higgs boson.
Differential fiducial cross section for the production angle $|\cos\theta^{*}|$ of the leading Z boson. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the production angle $|\cos\theta^{*}|$ of the leading Z boson.
Differential fiducial cross section for the production angle $\cos\theta_{1}$ of the anti-lepton from the leading Z boson. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the production angle $\cos\theta_{1}$ of the anti-lepton from the leading Z boson.
Differential fiducial cross section for the production angle $\cos\theta_{2}$ of the anti-lepton from the subleading Z boson. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the production angle $\cos\theta_{2}$ of the anti-lepton from the subleading Z boson.
Differential fiducial cross section for the azimuthal angle $\phi$ of the decay planes of the two reconstructed Z bosons. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the azimuthal angle $\phi$ of the decay planes of the two reconstructed Z bosons.
Differential fiducial cross section for the azimuthal angle $\phi_{1}$ of the decay plane of the leading Z boson and the plane formed between its four-momentum and the z-axis. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the azimuthal angle $\phi_{1}$ of the decay plane of the leading Z boson and the plane formed between its four-momentum and the z-axis.
Differential fiducial cross section for the jet multiplicity $N_{jets}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the jet multiplicity $N_{jets}$.
Differential fiducial cross section for the inclusive jet multiplicity $N_{jets}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Differential fiducial cross section for the number of b-quark initiated jets $N_{b-jets}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the number of b-quark initiated jets $N_{b-jets}$.
Differential fiducial cross section for the transverse momentum of the leading jet $p_{T}^{lead.jet}$ in events with at least one jet. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the transverse momentum of the leading jet $p_{T}^{lead.jet}$ in events with at least one jet.
Differential fiducial cross section for the transverse momentum of the subleading jet $p_{T}^{sublead.jet}$ in events with at least two jets. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the transverse momentum of the subleading jet $p_{T}^{sublead.jet}$ in events with at least two jets.
Differential fiducial cross section for the invariant mass of the two highest-pT jets $m_{jj}$ in events with at least two jets. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the invariant mass of the two highest-pT jets $m_{jj}$ in events with at least two jets.
Differential fiducial cross section for the distance between the two highest-pT jets in pseudorapidity $\Delta\eta_{jj}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the distance between the two highest-pT jets in pseudorapidity $\Delta\eta_{jj}$.
Differential fiducial cross section for the distance between the two highest-pT jets in $\phi$ $\Delta\phi_{jj}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the distance between the two highest-pT jets in $\phi$ $\Delta\phi_{jj}$.
Differential fiducial cross section for the transverse momentum of the four lepton plus jet system, in events with at least one jet $p_{T}^{4lj}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the transverse momentum of the four lepton plus jet system, in events with at least one jet $p_{T}^{4lj}$.
Differential fiducial cross section for the transverse momentum of the four lepton plus di-jet system, in events with at least two jets $p_{T}^{4ljj}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 . Measured value in the last bin is un upper limit at 95% CL.
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the transverse momentum of the four lepton plus di-jet system, in events with at least two jets $p_{T}^{4ljj}$.
Differential fiducial cross section for the invariant mass of the four lepton plus jet system in events with at least one jet $m_{4lj}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the invariant mass of the four lepton plus jet system in events with at least one jet $m_{4lj}$.
Differential fiducial cross section for the invariant mass of the four lepton plus di-jet system in events with at least two jets $m_{4ljj}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the invariant mass of the four lepton plus di-jet system in events with at least two jets $m_{4ljj}$.
Differential fiducial cross section for the leading vs. subleading Z boson mass $m_{12}$vs.$m_{34}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the leading vs. subleading Z boson mass $m_{12}$vs.$m_{34}$.
Differential fiducial cross section for the leading vs. subleading Z boson mass $m_{12}$vs.$m_{34}$ in $ll\mu\mu$ final states. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Differential fiducial cross section for the leading vs. subleading Z boson mass $m_{12}$vs.$m_{34}$ in $llee$ final states. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the leading vs. subleading Z boson mass m12 vs. m34 in $ll\mu\mu$ and $llee$ final states.
Differential fiducial cross section of the $p_{T}^{4l}$ distribution in $|y_{4l}|$ bins. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section of the $p_{T}^{4l}$ distribution in $|y_{4l}|$ bins.
Differential fiducial cross section of the $p_{T}^{4l}$ distribution in $N_{jets}$ bins. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section of the $p_{T}^{4l}$ distribution in $N_{jets}$ bins.
Differential fiducial cross section for transverse momentum of the four lepton system vs. the transverse momentum of the four lepton plus jet system $p_{T}^{4l}$vs.$p_{T}^{4lj}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for transverse momentum of the four lepton system vs. the transverse momentum of the four lepton plus jet system $p_{T}^{4l}$vs.$p_{T}^{4lj}$.
Differential fiducial cross section for the transverse momentum of the four lepton plus jet system vs the invariant mass of the four lepton plus jet system $p_{T}^{4l}$vs.$m_{4lj}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the transverse momentum of the four lepton plus jet system vs the invariant mass of the four lepton plus jet system $p_{T}^{4l}$vs.$m_{4lj}$.
Differential fiducial cross section for the transverse momentum of the four lepton vs the transverse momentum of the leading jet $p_{T}^{4l}$vs.$p_{T}^{l.jet}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the transverse momentum of the four lepton vs the transverse momentum of the leading jet $p_{T}^{4l}$vs.$p_{T}^{lead.jet}$.
Differential fiducial cross section for the transverse momentum of the leading jet vs the rapidity of the leading jet $p_{T}^{lead.jet}$vs.$|y^{lead.jet}|$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the transverse momentum of the leading jet vs the rapidity of the leading jet $p_{T}^{lead.jet}$vs.$|y^{lead.jet}|$.
Differential fiducial cross section for the transverse momentum of the leading jet vs the transverse momentum of the subleading jet $p_{T}^{lead.jet}$vs.$p_{T}^{sublead.jet}$. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the transverse momentum of the leading jet vs the transverse momentum of the subleading jet $p_{T}^{lead.jet}$vs.$p_{T}^{sublead.jet}$.
Differential fiducial cross section for the leading Z boson mass $m_{12}$ in $4\mu$ and $4e$ final states. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Differential fiducial cross section for the leading Z boson mass $m_{12}$ in $2e2\mu$ and $2\mu2e$ final states. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the leading Z boson mass $m_{12}$ in $4l$ and $2l2l$ final states.
Differential fiducial cross section for the subleading Z boson mass $m_{34}$ in $4\mu$ and $4e$ final states. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Differential fiducial cross section for the subleading Z boson mass $m_{34}$ in $2e2\mu$ and $2\mu2e$ final states. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the subleading Z boson mass $m_{34}$ in $4l$ and $2l2l$ final states.
Differential fiducial cross section for the azimuthal angle $\phi$ of the decay planes of the two reconstructed Z bosons in $4\mu$ and $4e$ final states. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Differential fiducial cross section for the azimuthal angle $\phi$ of the decay planes of the two reconstructed Z bosons in $2e2\mu$ and $2\mu2e$ final states. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the azimuthal angle $\phi$ of the decay planes of the two reconstructed Z bosons in $4l$ and $2l2l$ final states.
Differential fiducial cross section for the leading vs. subleading Z boson mass $m_{12}$vs.$m_{34}$ in $4\mu$ and $4e$ final states. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Differential fiducial cross section for the leading vs. subleading Z boson mass $m_{12}$vs.$m_{34}$ in $2\mu2e$ and $2e2\mu$ final states. The measured cross sections are compared to predictions provided by NNLOPS + XH. NNLOPS is normalised to the N3LO total cross section with a K-factor = 1.1 .
Correlation matrix between the measured cross sections and the $ZZ^{*}$ background normalization corresponding to the differential fiducial cross section for the leading vs. subleading Z boson mass $m_{12}$vs.$m_{34}$ in $4l$ and $2l2l$ final states.
The coupling properties of the Higgs boson are studied in the four-lepton decay channel using 36.1 fb$^{-1}$ of $pp$ collision data from the LHC at a centre-of-mass energy of 13 TeV collected by the ATLAS detector. Cross sections are measured for the four key production modes in several exclusive regions of the Higgs boson production phase space and are interpreted in terms of coupling modifiers. The inclusive cross section times branching ratio for $H \rightarrow ZZ^*$ decay and for a Higgs boson absolute rapidity below 2.5 is measured to be $1.73^{+0.24}_{-0.23}$(stat.)$^{+0.10}_{-0.08}$(exp.)$\pm 0.04$(th.) pb compared to the Standard Model prediction of $1.34\pm0.09$ pb. In addition, the tensor structure of the Higgs boson couplings is studied using an effective Lagrangian approach for the description of interactions beyond the Standard Model. Constraints are placed on the non-Standard-Model CP-even and CP-odd couplings to $Z$ bosons and on the CP-odd coupling to gluons.
The expected number of SM Higgs boson events with a mass mH= 125.09 GeV in the mass range 118 < m4l < 129 GeV for an integrated luminosity of 36.1/fb and sqrt(s)= 13 TeV in each reconstructed event category, shown separately for each Stage-0 production bin. The ggF and bbH contributions are shown separately but both contribute to the same (ggF) production bin. Statistical and systematic uncertainties are added in quadrature.
The observed and expected numbers of signal and background events in the four-lepton decay channels for an integrated luminosity of 36.1/fb and at sqrt(s)= 13 TeV, assuming the SM Higgs boson signal with a mass m_{H} = 125.09 GeV . The second column shows the expected number of signal events for the full mass range while the subsequent columns correspond to the mass range of 118 < m4l < 129 GeV. In addition to the ZZ* background, the contribution of other backgrounds is shown, comprising the data-driven estimate from Table 4 and the simulation-based estimate of contributions from rare triboson and tbar{t}V processes. Statistical and systematic uncertainties are added in quadrature.
The expected and observed numbers of signal events in reconstructed event categories for an integrated luminosity of 36.1/fb at sqrt(s)= 13 TeV, together with signal acceptances for each Stage-0 production mode. Results are obtained in bins of BDT discriminants using coarse binning with several bins merged into one. Signal acceptances less than 0.0001 are set to 0.
The observed values of Sigma*BR(H->ZZ*), the SM expected cross section sBRsm and their ratio Sigma*BR/(Sigma*BR)_SM for the inclusive production and in each Stage-0 and reduced Stage-1 production bin for an integrated luminosity of 36.1/fb and at sqrt(s)=13 TeV. The bbH contribution is considered as a part of the ggF production bins. The upper limits correspond to the 95% CL obtained with pseudo-experiments using the CL_s method. The uncertainties are given as (stat.)+(exp.)+(th.) for Stage 0 and as (stat.)+(syst.) for reduced Stage 1. Values without uncertainity are 95% CL upper limits.
Signal acceptance obtained as the ratio of the number of simulated signal events satisfying the event selection criteria in each reconstructed event category over the total number of events generated in the phase space specified by a given reduced Stage-1 ggF production bin. Results are obtained in bins of BDT discriminants using coarse binning with several bins merged into one. Values less than 0.0001 are set to 0.
Signal acceptance obtained as the ratio of the number of simulated signal events satisfying the event selection criteria in each reconstructed event category over the total number of events generated in the phase space specified by the given reduced Stage-1 VBF and VH production bins. Results are obtained in bins of BDT discriminants using coarse binning with several bins merged into one. Values less than 0.0001 are set to 0.
The signal strengths mu for the inclusive production and in each Stage-0 and reduced Stage-1 production bin for an integrated luminosity of 36.1/fb and at sqrt(s)=13 TeV. The bbH contribution is considered as a part of the ggF production bins. The upper limits correspond to the 95% CL obtained with pseudo-experiments using the CL_s method. The uncertainties are given as (stat.)+(exp.)+(th.) for Stage 0 and as (stat.)+(syst.) for reduced Stage 1. Values without uncertainity are 95% CL upper limits.
Signal acceptance (in percent) obtained as the ratio of the number of simulated signal events satisfying the event selection criteria in each reconstructed event category to the total number of generated events, as predicted by the MadGraph5_aMC@NLO generator assuming the SM coupling tensor structure or the BSM tensor structure with ($\kappa_{SM}$ = 1, | $\kappa_{AVV}$ | $\neq$ 0).
Number of expected ggF Higgs boson events for an integrated luminosity of $\mathcal L=36.1 \text{fb}^{-1}$ and at $\sqrt{\mathrm{s}}=13$ TeV, as predicted by the MadGraph5_aMC@NLO generator assuming the SM coupling tensor structure or the BSM tensor structure with ($\kappa_{SM}=1$, $|\kappa_{Avv}|=6$). The highest-order SM predicition for the sum of the ggF, ttH and bbH contributions is also shown for comparison.
Number of expected VBF and VH Higgs boson events for an integrated luminosity of $\mathcal L=36.1 \text{fb}^{-1}$ and at $\sqrt{\mathrm{s}}=13$ TeV, as predicted by the MadGraph5_aMC@NLO generator assuming the SM coupling tensor structure or the BSM tensor structure with ($\kappa_{SM}=1$, $|\kappa_{Avv}|=5$). The highest-order SM predicition for the sum of the VBF and VH contributions is also shown for comparison.
Expected Correlation Matrix for Stage 0
Observed Correlation Matrix for Stage 0. As upper limits are derived for ttH and VH POIs using the observed data, the corresponding terms inside the matrix are set to zero.
Expected Correlation Matrix for Reduced Stage 1
Observed Correlation Matrix for Reduced Stage 1. As upper limits are derived for ttH and VH POIs using the observed data, the corresponding terms inside the matrix are set to zero.
Expected Covariance Matrix for Stage 0
Observed Covariance Matrix for Stage 0. As upper limits are derived for ttH and VH POIs using the observed data, the corresponding terms inside the matrix are set to zero.
Expected Covariance Matrix for Reduced Stage 1
Observed Covariance Matrix for Reduced Stage 1. As upper limits are derived for ttH and VH POIs using the observed data, the corresponding terms inside the matrix are set to zero.
Likelihood contours at 68% CL in the (Sigma_ggF*B , Sigma_VBF*B ) plane
Likelihood contours at 95% CL in the (Sigma_ggF*B , Sigma_VBF*B ) plane
Expected two-dimensional negative log-likelihood scans for $\kappa_{HVV}$ versus $\kappa_{AVV}$ coupling parameters using $\mathcal L=36.1 \text{fb}^{-1}$ of data and at $\sqrt{\mathrm{s}}=13$ TeV. The couplings $\kappa_{Hgg}$ and $\kappa_{SM}$ are fixed to the SM value of one in the fit. The 95% CL exclusion limits are shown.
Observed two-dimensional negative log-likelihood scans for $\kappa_{HVV}$ versus $\kappa_{AVV}$ coupling parameters using $\mathcal L=36.1 \text{fb}^{-1}$ of data and at $\sqrt{\mathrm{s}}=13$ TeV. The couplings $\kappa_{Hgg}$ and $\kappa_{SM}$ are fixed to the SM value of one in the fit. The 95% CL exclusion limits are shown.
Expected two-dimensional negative log-likelihood scans for $\kappa_{HVV}$ versus $\kappa_{AVV}$ coupling parameters using $\mathcal L=36.1 \text{fb}^{-1}$ of data and at $\sqrt{\mathrm{s}}=13$ TeV. The coupling $\kappa_{Hgg}$ is fixed to the SM value of one in the fit. The coupling $\kappa_{SM}$ is left as a free parameter of the fit. The 95% CL exclusion limits are shown.
Observed two-dimensional negative log-likelihood scans for $\kappa_{HVV}$ versus $\kappa_{AVV}$ coupling parameters using $\mathcal L=36.1 \text{fb}^{-1}$ of data and at $\sqrt{\mathrm{s}}=13$ TeV. The coupling $\kappa_{Hgg}$ is fixed to the SM value of one in the fit. The coupling $\kappa_{SM}$ is left as a free parameter of the fit. The 95% CL exclusion limits are shown.
Expected two-dimensional negative log-likelihood scans for $\kappa_{HVV}$ versus $\kappa_{SM}$ coupling parameters using $\mathcal L=36.1 \text{fb}^{-1}$ of data and at $\sqrt{\mathrm{s}}=13$ TeV. The 95% CL exclusion limits are shown.
Observed two-dimensional negative log-likelihood scans for $\kappa_{HVV}$ versus $\kappa_{SM}$ coupling parameters using $\mathcal L=36.1 \text{fb}^{-1}$ of data and at $\sqrt{\mathrm{s}}=13$ TeV. The 95% CL exclusion limits are shown.
Expected two-dimensional negative log-likelihood scans for $\kappa_{AVV}$ versus $\kappa_{SM}$ coupling parameters using $\mathcal L=36.1 \text{fb}^{-1}$ of data and at $\sqrt{\mathrm{s}}=13$ TeV. The 95% CL exclusion limits are shown.
Observed two-dimensional negative log-likelihood scans for $\kappa_{AVV}$ versus $\kappa_{SM}$ coupling parameters using $\mathcal L=36.1 \text{fb}^{-1}$ of data and at $\sqrt{\mathrm{s}}=13$ TeV. The 95% CL exclusion limits are shown.
This Letter presents a measurement of the inelastic proton-proton cross section using 60 $\mu$b$^{-1}$ of $pp$ collisions at a center-of-mass energy $\sqrt{s}$ of $13$ TeV with the ATLAS detector at the LHC. Inelastic interactions are selected using rings of plastic scintillators in the forward region ($2.07<|\eta|<3.86$) of the detector. A cross section of $68.1\pm 1.4$ mb is measured in the fiducial region $\xi=M_X^2/s>10^{-6}$, where $M_X$ is the larger invariant mass of the two hadronic systems separated by the largest rapidity gap in the event. In this $\xi$ range the scintillators are highly efficient. For diffractive events this corresponds to cases where at least one proton dissociates to a system with $M_X>13$ GeV. The measured cross section is compared with a range of theoretical predictions. When extrapolated to the full phase space, a cross-section of $78.1 \pm 2.9$ mb is measured, consistent with the inelastic cross section increasing with center-of-mass energy.
The measured and extrapolated inelastic cross section. The statistical uncertainty is negligible and is therefore displayed as zero. The first systematic uncertainty is the experimental systematic uncertainty apart from the luminosity, the second is the luminosity uncertainty, and the third is the extrapolation uncertainty.
A search is made for a vector-like $T$ quark decaying into a Higgs boson and a top quark in 13 TeV proton-proton collisions using the ATLAS detector at the Large Hadron Collider with a data sample corresponding to an integrated luminosity of 139 fb$^{-1}$. The Higgs-boson and top-quark candidates are identified in the all-hadronic decay mode, where $H\to b\bar{b}$ and $t\to b W \to b q \bar{q}^\prime$ are reconstructed as large-radius jets. The candidate Higgs boson, top quark, and associated B-hadrons are identified using tagging algorithms. No significant excess is observed above the background, so limits are set on the production cross-section of a singlet $T$ quark at 95% confidence level, depending on the mass, $m_T$, and coupling, $\kappa_T$, of the vector-like $T$ quark to Standard Model particles. In the considered mass range between 1.0 and 2.3 TeV, the upper limit on the allowed coupling values increases with $m_T$ from a minimum value of 0.35 for 1.07 < $m_T$ < 1.4 TeV to 1.6 for $m_T$ = 2.3 TeV.
Dijet invariant mass distribution for the $SR$ showing the results of the model when fitted to the data. A $T$-quark hypothesis with $m_{T} = 1.6$ TeV and $\kappa_{T} = 0.5$ is used in the fit.
Dijet invariant mass distribution for the $ttNR$ showing the results of the model when fitted to the data. A $T$-quark hypothesis with $m_{T} = 1.6$ TeV and $\kappa_{T} = 0.5$ is used in the fit.
Observed and expected 95% CL upper limits on the single $T$-quark coupling $\kappa_{T}$ as a function of $m_{T}$ are shown.
Observed and expected 95% CL lower limits on the $T$-quark mass as a function of the $T$-quark width-to-mass ratio and the branching fraction of the $T \rightarrow Ht$ decay ($\Gamma_{T}$ is the $T$-quark width).
Cutflow table listing the number of events passing each criterion for a $T$-quark hypothesis with a mass of 1.6 TeV and $\kappa_{T} = 0.5$. The initial signal event yield is the predicted number of $T$-quark events inclusive in the Higgs-boson and top-quark decays for 139 fb$^{-1}$.
Observed 95% CL upper limits on the single $T$-quark production cross-section as a function of the $T$-quark coupling $\kappa_{T}$ and $m_{T}$.
Expected 95% CL upper limits on the single $T$-quark production cross-section as a function of the $T$-quark coupling $\kappa_{T}$ and $m_{T}$.
Observed and expected 95% CL lower limits on the $T$-quark mass as a function of the $T$-quark width-to-mass ratio and the branching fraction of the $T \rightarrow Wb$ decay ($\Gamma_{T}$ is the $T$-quark width).
A search for nonresonant Higgs boson pair production in the $b\bar{b}\gamma\gamma$ final state is performed using 140 fb$^{-1}$ of proton-proton collisions at a centre-of-mass energy of 13 TeV recorded by the ATLAS detector at the CERN Large Hadron Collider. This analysis supersedes and expands upon the previous nonresonant ATLAS results in this final state based on the same data sample. The analysis strategy is optimised to probe anomalous values not only of the Higgs ($H$) boson self-coupling modifier $\kappa_\lambda$ but also of the quartic $HHVV$ ($V=W,Z$) coupling modifier $\kappa_{2V}$. No significant excess above the expected background from Standard Model processes is observed. An observed upper limit $\mu_{HH}<4.0$ is set at 95% confidence level on the Higgs boson pair production cross-section normalised to its Standard Model prediction. The 95% confidence intervals for the coupling modifiers are $-1.4<\kappa_\lambda<6.9$ and $-0.5<\kappa_{2V}<2.7$, assuming all other Higgs boson couplings except the one under study are fixed to the Standard Model predictions. The results are interpreted in the Standard Model effective field theory and Higgs effective field theory frameworks in terms of constraints on the couplings of anomalous Higgs boson (self-)interactions.
Observed (solid line) value of $-2\ln\Lambda$ as a function of $\kappa_{\lambda}$, when all other coupling modifiers are fixed to their SM predictions.
Expected (dashed line) value of $-2\ln\Lambda$ as a function of $\kappa_{\lambda}$, when all other coupling modifiers are fixed to their SM predictions.
Observed (solid line) value of $-2\ln\Lambda$ as a function of $\kappa_{2V}$, when all other coupling modifiers are fixed to their SM predictions.
Expected (dashed line) value of $-2\ln\Lambda$ as a function of $\kappa_{2V}$, when all other coupling modifiers are fixed to their SM predictions.
Likelihood observed contours at 68% CL (solid line) and 95% CL (dashed line) in the $\kappa_{\lambda}$, $\kappa_{2V}$ parameter space, when all other coupling modifiers are fixed to their SM predictions. The best-fit value, denoted by a cross in the plot, corresponds to the very first entry in the table.
Likelihood expected contours at 68% CL (teal shaded region) and 95% CL (yellow shaded region) in the $\kappa_{\lambda}$, $\kappa_{2V}$ parameter space, when all other coupling modifiers are fixed to their SM predictions.In the plot, the SM prediction is indicated by the star.
Likelihood observed contours at 68% CL (solid line) and 95% CL (dashed line) in the $c_{gghh}$ versus $c_{hhh}$ HEFT parameter space, with the remaining coefficient fixed to its SM value. The best-fit value, denoted by a cross in the plot, corresponds to the very first entry in the table.
Likelihood expected contours at 68% CL (teal shaded region) 95% CL (yellow shaded region) in the $c_{gghh}$ versus $c_{hhh}$ HEFT parameter space, with the remaining coefficient fixed to its SM value. In the plot, the SM prediction is indicated by the star.
Likelihood observed contours at 68% CL (solid line) and 95% CL (dashed line) in the $c_{tthh}$ versus $c_{hhh}$ HEFT parameter space, with the remaining coefficient fixed to its SM value. The best-fit value, denoted by a cross in the plot, corresponds to the very first entry in the table.
Likelihood exptected contours at 68% CL (teal shaded region) and 95% CL (yellow shaded region) in the $c_{tthh}$ versus $c_{hhh}$ HEFT parameter space, with the remaining coefficient fixed to its SM value. In the plot, the SM prediction is indicated by the star.
The observed (filled circles) and expected (hollow circles) 95% CL upper limits on the $HH$ ggF production cross-section in the Standard Model and for seven HEFT benchmark points. The teal and yellow colored bands indicate the $\pm 1\sigma$ and $\pm 2\sigma$ variations on the expected limit due to statistical and systematic uncertainties. The predicted cross-sections of each of the models under consideration are shown by the red crosses. The contribution from VBF production to the total $HH$ production cross-section is neglected.
Likelihood observed contours at 68% CL (solid line) and 95% CL (dashed line) in the $c_{{H}\boxed{}}$ versus $c_{H}$ SMEFT parameter space, with the remaining coefficient fixed to its SM value. The best-fit value, denoted by a cross in the plot, corresponds to the very first entry in the table.
Likelihood expected contours at 68% CL (teal shaded region) 95% CL (yellow shaded region) in the $c_{{H}\boxed{}}$ versus $c_{H}$ SMEFT parameter space, with the remaining coefficient fixed to its SM value. In the plot, the SM prediction is indicated by the star.
The acceptance times efficiency for the signal ggF $HH$ process as a function of the coupling modifier $\kappa_{\lambda}$ in each analysis category. The other coupling modifiers affecting ggF $HH$ production are fixed to their SM predictions. The bands indicate the simulation statistical uncertainty.
The acceptance times efficiency for the signal VBF $HH$ process as a function of the coupling modifier $\kappa_{\lambda}$ in each analysis category. When varying $\kappa_{\lambda}$, the other coupling modifiers affecting the VBF $HH$ production mode are set to their SM predictions. The bands indicate the simulation statistical uncertainty.
The acceptance times efficiency for the signal VBF $HH$ process as a function of the coupling modifier $\kappa_{2V}$ in each analysis category. When varying $\kappa_{2V}$, the other coupling modifiers affecting the VBF $HH$ production mode are set to their SM predictions. The bands indicate the simulation statistical uncertainty.
Expected yields of the signal $HH$ process as a function of the coupling modifier $\kappa_{\lambda}$ after applying the analysis preselection and in each analysis category after the final selection. The $HH$ yield is obtained considering both the $ggF$ and $VBF$ contributions. The other coupling modifiers affecting $HH$ production are fixed to their SM predictions. The bands indicate the simulation statistical uncertainty.
The acceptance times efficiency for the signal ggF $HH$ process in each analysis category as a function of the $c_{hhh}$ HEFT coefficients. The dashed lines denote values that are excluded at 95% CL. The bottom panels show the efficiency of the sum of all analysis categories.
The acceptance times efficiency for the signal ggF $HH$ process in each analysis category as a function of the $c_{tthh}$ HEFT coefficients. The dashed lines denote values that are excluded at 95% CL. The bottom panels show the efficiency of the sum of all analysis categories.
The acceptance times efficiency for the signal ggF $HH$ process in each analysis category as a function of the $c_{gghh}$ HEFT coefficients. The dashed lines denote values that are excluded at 95% CL. The bottom panels show the efficiency of the sum of all analysis categories.
The acceptance times efficiency for the signal ggF $HH$ process in each analysis category as a function of the $c_{H}$ SMEFT coefficients. The dashed lines denote values that are excluded at 95% CL. The bottom panels show the efficiency of the sum of all analysis categories.
The acceptance times efficiency for the signal ggF $HH$ process in each analysis category as a function of the $c_{{H}\boxed{}}$ SMEFT coefficients. The dashed lines denote values that are excluded at 95% CL. The bottom panels show the efficiency of the sum of all analysis categories.
The yield of the signal ggF $HH$ process in each analysis category as a function of the $c_{hhh}$ HEFT coefficients. The dashed lines denote values that are excluded at 95% CL. The bottom panels show the efficiency of the sum of all analysis categories.
The yield of the signal ggF $HH$ process in each analysis category as a function of the $c_{tthh}$ HEFT coefficients. The dashed lines denote values that are excluded at 95% CL. The bottom panels show the efficiency of the sum of all analysis categories.
The yield of the signal ggF $HH$ process in each analysis category as a function of the $c_{gghh}$ HEFT coefficients. The dashed lines denote values that are excluded at 95% CL. The bottom panels show the efficiency of the sum of all analysis categories.
The yield of the signal ggF $HH$ process in each analysis category as a function of the $c_{H}$ SMEFT coefficients. The dashed lines denote values that are excluded at 95% CL. The bottom panels show the efficiency of the sum of all analysis categories.
The yield of the signal ggF $HH$ process in each analysis category as a function of the $c_{{H}\boxed{}}$ SMEFT coefficients. The dashed lines denote values that are excluded at 95% CL. The bottom panels show the efficiency of the sum of all analysis categories.
Distributions of the diphoton invariant mass for events in data (black dots with error bars) compared to the sum of the expected signal and backgrounds (histograms) in the low mass 1 region.
Distributions of the diphoton invariant mass for events in data (black dots with error bars) compared to the sum of the expected signal and backgrounds (histograms) in the low mass 2 region.
Distributions of the diphoton invariant mass for events in data (black dots with error bars) compared to the sum of the expected signal and backgrounds (histograms) in the low mass 3 region.
Distributions of the diphoton invariant mass for events in data (black dots with error bars) compared to the sum of the expected signal and backgrounds (histograms) in the low mass 4 region.
Distributions of the diphoton invariant mass for events in data (black dots with error bars) compared to the sum of the expected signal and backgrounds (histograms) in the high mass 1 region.
Distributions of the diphoton invariant mass for events in data (black dots with error bars) compared to the sum of the expected signal and backgrounds (histograms) in the high mass 2 region.
Distributions of the diphoton invariant mass for events in data (black dots with error bars) compared to the sum of the expected signal and backgrounds (histograms) in the high mass 3 region.
Observed (solid line) value of $-2\ln\Lambda$ as a function of the $c_{hhh}$ HEFT coefficients when all other coupling modifiers are fixed to the SM value
Expected (dashed line) value of $-2\ln\Lambda$ as a function of the $c_{hhh}$ HEFT coefficients when all other coupling modifiers are fixed to the SM value
Observed (solid line) value of $-2\ln\Lambda$ as a function of the $c_{gghh}$ HEFT coefficients when all other coupling modifiers are fixed to the SM value
Expected (dashed line) value of $-2\ln\Lambda$ as a function of the $c_{gghh}$ HEFT coefficients when all other coupling modifiers are fixed to the SM value
Observed (solid line) value of $-2\ln\Lambda$ as a function of the $c_{tthh}$ HEFT coefficients when all other coupling modifiers are fixed to the SM value
Expected (dashed line) value of $-2\ln\Lambda$ as a function of the $c_{tthh}$ HEFT coefficients when all other coupling modifiers are fixed to the SM value
Observed (solid line) value of $-2\ln\Lambda$ as a function of the $c_{H}$ SMEFT coefficients when all other coupling modifiers are fixed to the SM value.
Expected (dashed line) value of $-2\ln\Lambda$ as a function of the $c_{H}$ SMEFT coefficients when all other coupling modifiers are fixed to the SM value.
Observed (solid line) value of $-2\ln\Lambda$ as a function of the $c_{{H}\boxed{}}$ SMEFT coefficients when all other coupling modifiers are fixed to the SM value.
Expected (dashed line) value of $-2\ln\Lambda$ as a function of the $c_{{H}\boxed{}}$ SMEFT coefficients when all other coupling modifiers are fixed to the SM value.
Summary of the expected (blue) and observed (orange) one-dimensional constraints at 68% (solid error bars) and 95% (dashed error bars) CL on the coefficients of selected HEFT (top) and SMEFT (bottom) operators describing Higgs boson interactions affecting $HH$ production through gluon--gluon fusion. The results are obtained from one dimensional scans of the profile log-likelihood assuming that all other Wilson coefficients are fixed to their SM values. The contribution from VBF $HH$ production is neglected.
This paper presents a search for new heavy particles decaying into a pair of top quarks using 139 fb$^{-1}$ of proton--proton collision data recorded at a centre-of-mass energy of $\sqrt{s}=13$ TeV with the ATLAS detector at the Large Hadron Collider. The search is performed using events consistent with pair production of high-transverse-momentum top quarks and their subsequent decays into the fully hadronic final states. The analysis is optimized for resonances decaying into a $t\bar{t}$ pair with mass above 1.4 TeV, exploiting a dedicated multivariate technique with jet substructure to identify hadronically decaying top quarks using large-radius jets and evaluating the background expectation from data. No significant deviation from the background prediction is observed. Limits are set on the production cross-section times branching fraction for the new $Z'$ boson in a topcolor-assisted-technicolor model. The $Z'$ boson masses below 3.9 and 4.7 TeV are excluded at 95% confidence level for the decay widths of 1% and 3%, respectively.
Acceptance and acceptance times selection efficiency as a function of $m^{gen}_{t\bar{t}}$ in SR$1b$. The acceptance is measured as the fraction of events with two leading truth-contained large-$R$ jets, both satisfying the kinematic requirements, but not containing generator-level electrons or muons, as described in the paper. The acceptance $\times$ efficiency is calculated with respect to the full analysis selections including top- and $b$-tagging requirements on the two leading large-$R$ jets. The $m^{gen}_{t\bar{t}}$ is calculated from the momenta of top and anti-top quarks at the generator level before final-state radiation. The branching fractions of the $t \bar{t}$ into all possible final states are included in the acceptance calculation.
Acceptance and acceptance times selection efficiency as a function of $m^{gen}_{t\bar{t}}$ in SR$2b$. The acceptance is measured as the fraction of events with two leading truth-contained large-$R$ jets, both satisfying the kinematic requirements, but not containing generator-level electrons or muons, as described in the paper. The acceptance $\times$ efficiency is calculated with respect to the full analysis selections including top- and $b$-tagging requirements on the two leading large-$R$ jets. The $m^{gen}_{t\bar{t}}$ is calculated from the momenta of top and anti-top quarks at the generator level before final-state radiation. The branching fractions of the $t \bar{t}$ into all possible final states are included in the acceptance calculation.
Observed $m_{t\bar{t}}^{reco}$ distributions in data for SR$1b$, shown together with the result of the fit with the three-shape-parameter function. The error bars indicate the effect of the fit parameter uncertainty on the background prediction. The bin width of the distributions is chosen to be the same as that used in the background parameterization.
Observed $m_{t\bar{t}}^{reco}$ distributions in data for SR$2b$, shown together with the result of the fit with the three-shape-parameter function. The error bars indicate the effect of the fit parameter uncertainty on the background prediction. The bin width of the distributions is chosen to be the same as that used in the background parameterization.
Observed and expected upper limits on the cross-section times branching fraction of the $Z'_{TC2} \rightarrow t\bar{t}$ as a function of the $Z'_{TC2}$ mass ($\Gamma/m = 1.2$%).
Fit parameter values obtained from fits to data in the two signal regions. The fit function is $f(x) = p_{0} (1-x)^{p_{1}} x^{p_{2} + p_{3} \log(x)}$, where $x = m^{reco}_{t\bar{t}}/\sqrt{s}$.
A search for diphoton resonances in the mass range between 10 and 70 GeV with the ATLAS experiment at the Large Hadron Collider (LHC) is presented. The analysis is based on $pp$ collision data corresponding to an integrated luminosity of 138 fb$^{-1}$ at a centre-of-mass energy of 13 TeV recorded from 2015 to 2018. Previous searches for diphoton resonances at the LHC have explored masses down to 65 GeV, finding no evidence of new particles. This search exploits the particular kinematics of events with pairs of closely spaced photons reconstructed in the detector, allowing examination of invariant masses down to 10 GeV. The presented strategy covers a region previously unexplored at hadron colliders because of the experimental challenges of recording low-energy photons and estimating the backgrounds. No significant excess is observed and the reported limits provide the strongest bound on promptly decaying axion-like particles coupling to gluons and photons for masses between 10 and 70 GeV.
The expected and observed upper limits at 95\% CL on the fiducial cross-section times branching ratio to two photons of a narrow-width ($\Gamma_{X}$ = 4 MeV) scalar resonance as a function of its mass $m_{X}$.
Diphoton invariant mass in the signal region using a 0.1 GeV binning.
Parametrization of the $C_{X}$ factor, defined as the ratio between the number of reconstructed signal events passing the analysis cuts and the number of signal events at the particle level generated within the fiducial volume, as function of $m_{X}$ obtained from the narrow width simulated signal samples produced in gluon fusion.
Parametrization of the $A_{X}$ factor, defined as the fraction of diphoton resonances satisfying the fiducial acceptance at the particle level, as function of $m_{X}$ obtained from the narrow width simulated signal samples produced in gluon fusion.
The correction factor, $C_{X}$, defined as the ratio between the number of reconstructed signal events passing the analysis cuts and the number of signal events at the particle level generated within the fiducial volume, and acceptance correction factor, $A_{X}$, defined as the fraction of diphoton resonances satisfying the fiducial acceptance at the particle level. Both are computed for NWA spin-0 models as a function of $m_{X}$.
Effect of event selections on a scalar MC signal sample generated for $m_{X}$ = 15 GeV and on the data. For the MC sample, the efficiencies are shown after applying event weights and a truth level filter that requires two photons with $p^{\gamma\gamma}_{T}>40$ GeV; for the data, the absolute yields are shown. The initial yields for data include a trigger preselection that is the OR of a list of single photon and diphoton triggers. The "2 $loose$ photons" step includes the kinematic acceptance cuts.
Parameterization of the Double Sided Crystal Ball function parameters describing the scalar mass resolution model as a function of $m_{X}$ [GeV].
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But sometimes you may wish to be more specific. Here we show you how.
Guidance on the query string syntax can also be found in the OpenSearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.