Vertex-level efficiency if no re-tracking is performed, as a function of the vertex radial position for an RPV SUSY model of squark production with $\tilde{q}\to q[\tilde{\chi}_1^0\to\mu qq]$, where $m(\tilde{q}) = 700$ GeV, $m(\tilde{\chi}_1^0) = 494$ GeV and $c\tau(\tilde{\chi}_1^0)$ = 175 mm. The result with re-tracking is tabulated in http://hepdata.cedar.ac.uk/view/ins1362183/d1.

Upper limits (95% CL) on the number of DV+muon displaced vertices in 20.3 fb$^{-1}$ and the corresponding vertex-level efficiencies (from Auxiliary Figure 7a) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider squark or gluino pair production, with masses in GeV as indicated, with either $\tilde{q}\to q[\tilde{\chi}_1^0\to\mu qq]$ or $\tilde{g}\to qq[\tilde{\chi}_1^0\to\mu qq]$ decays, respectively.

Upper limits (95% CL) on the number of DV+muon displaced vertices in 20.3 fb$^{-1}$ and the corresponding vertex-level efficiencies (from Auxiliary Figure 7b) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider squark or gluino pair production, with masses in GeV as indicated, with either $\tilde{q}\to q\tilde{\chi}_1^0$ or $\tilde{g}\to qq\tilde{\chi}_1^0$ decays, respectively.

Upper limits (95% CL) on the number of DV+electron displaced vertices in 20.3 fb$^{-1}$ and the corresponding vertex-level efficiencies (from Auxiliary Figure 7c) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider squark or gluino pair production, with masses in GeV as indicated, with either $\tilde{q}\to q[\tilde{\chi}_1^0\to e qq]$ or $\tilde{g}\to qq[\tilde{\chi}_1^0\to e qq]$ decays, respectively.

Upper limits (95% CL) on the number of DV+electron displaced vertices in 20.3 fb$^{-1}$ and the corresponding vertex-level efficiencies (from Auxiliary Figure 7d) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider squark or gluino pair production, with masses in GeV as indicated, with either $\tilde{q}\to q\tilde{\chi}_1^0$ or $\tilde{g}\to qq\tilde{\chi}_1^0$ decays, respectively.

Upper limits (95% CL) on the number of dilepton $e^+e^-$ displaced vertices in 20.3 fb$^{-1}$ and the corresponding vertex-level efficiencies (from Auxiliary Figure 5a) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to ee\nu]$ decays and masses in GeV as indicated. A dash indicates results omitted due to limited statistical precision.

Upper limits (95% CL) on the number of dilepton $e^{\pm}\mu^{\mp}$ displaced vertices in 20.3 fb$^{-1}$ and the corresponding vertex-level efficiencies (from Auxiliary Figure 5b) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to e\mu\nu]$ decays and masses in GeV as indicated.

Upper limits (95% CL) on the number of $\mu^+\mu^-$ displaced vertices in 20.3 fb$^{-1}$ and the corresponding vertex-level efficiencies (from Auxiliary Figure 5c) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to \mu\mu\nu]$ decays and masses in GeV as indicated. A dash indicates results omitted due to limited statistical precision.

Upper limits (95% CL) on the number of dilepton ($e^+e^-+e^{\pm}\mu^{\mp}+\mu^+\mu^-$) displaced vertices in 20.3 fb$^{-1}$ and the corresponding vertex-level efficiencies (from Auxiliary Figure 5d) for two GGM SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to Z\tilde{G}]$ decays, $m(\tilde{g})$ = 1100 GeV and $m(\tilde{\chi}_1^0)$ = 400 GeV.

Upper limits (95% CL) on the number of dilepton ($e^+e^-+e^{\pm}\mu^{\mp}+\mu^+\mu^-$) displaced vertices in 20.3 fb$^{-1}$ and the corresponding vertex-level efficiencies (from Auxiliary Figure 5d) for two GGM SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to Z\tilde{G}]$ decays, $m(\tilde{g})$ = 1100 GeV and $m(\tilde{\chi}_1^0)$ = 1000 GeV.

Upper limits (95% CL) from the dilepton $e^+e^-+e^{\pm}\mu^{\mp}$ channels on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 6a) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to e\mu\nu/ee\nu]$ decays and masses in GeV as indicated. For comparison, the production cross-sections for $m(\tilde{g})$ = 600 GeV and 1300 GeV are $1280\pm230$ fb and $1.7\pm0.7$ fb, respectively.

Upper limits (95% CL) from the dilepton $e^{\pm}\mu^{\mp}+\mu^+\mu^-$ channels on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 6b) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to e\mu\nu/\mu\mu\nu]$ decays and masses in GeV as indicated. For comparison, the production cross-sections for $m(\tilde{g})$ = 600 GeV and 1300 GeV are $1280\pm230$ fb and $1.7\pm0.7$ fb, respectively. A dash indicates results omitted due to limited statistical precision.

Upper limits (95% CL) from the dilepton $e^+e^-+e^{\pm}\mu^{\mp}+\mu^+\mu^-$ channels on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 6c) for two GGM SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to Z\tilde{G}]$ decays, $m(\tilde{g})$ = 1100 GeV and $m(\tilde{\chi}_1^0)$ = 400 GeV. For comparison, the production cross-section for $m(\tilde{g})$ = 1100 GeV is $7.6\pm2.8$ fb.

Upper limits (95% CL) from the dilepton $e^+e^-+e^{\pm}\mu^{\mp}+\mu^+\mu^-$ channels on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 6c) for two GGM SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to Z\tilde{G}]$ decays, $m(\tilde{g})$ = 1100 GeV and $m(\tilde{\chi}_1^0)$ = 1000 GeV. For comparison, the production cross-section for $m(\tilde{g})$ = 1100 GeV is $7.6\pm2.8$ fb.

Upper limits (95% CL) from the DV+jets channel on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 8a) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider squark pair production, with $\tilde{q}\to q\tilde{\chi}_1^0$ decays, $m(\tilde{q})$ = 700 GeV and $m(\tilde{\chi}_1^0)$ = 494 GeV. For comparison, the production cross-section for $m(\tilde{q})$ = 700 GeV is $124\pm17$ fb. A dash indicates where the limit-setting procedure did not converge.

Upper limits (95% CL) from the DV+jets channel on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 8b) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider squark pair production, with $\tilde{q}\to q\tilde{\chi}_1^0$ decays, $m(\tilde{q})$ = 1000 GeV and $m(\tilde{\chi}_1^0)$ = 108 GeV. For comparison, the production cross-section for $m(\tilde{q})$ = 1000 GeV is $11.9\pm1.5$ fb. A dash indicates where the limit-setting procedure did not converge.

Upper limits (95% CL) from the DV+$E_T^{miss}$ channel on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 9a) for two GGM SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to Z\tilde{G}]$ decays, $m(\tilde{g})$ = 1100 GeV and a $\tilde{\chi}_1^0$ mass in GeV as indicated. For comparison, the production cross-section for $m(\tilde{g})$ = 1100 GeV is $7.6\pm2.8$ fb.

Upper limits (95% CL) from the DV+jets channel on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 9b) for two GGM SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to Z\tilde{G}]$ decays, $m(\tilde{g})$ = 1100 GeV and a $\tilde{\chi}_1^0$ mass in GeV as indicated. For comparison, the production cross-section for $m(\tilde{g})$ = 1100 GeV is $7.6\pm2.8$ fb. A dash indicates where the limit-setting procedure did not converge.

Upper limits (95% CL) from the DV+$E_T^{miss}$ channel on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 10a) for four split-SUSY models as a function of the $\tilde{g}$ proper decay distance $c\tau$. The models consider gluino pair production, with $[\tilde{g}\to g/qq \tilde{\chi}_1^0]$ decays, $\tilde{g}$ masses in GeV as indicated and $m(\tilde{\chi}_1^0)$ = 100 GeV. For comparison, the production cross-sections for $m(\tilde{g})$ = 400 GeV, 800 GeV and 1400 GeV are $18700\pm2800$ fb, $149\pm31$ fb and $0.71\pm0.32$ fb, respectively.

Upper limits (95% CL) from the DV+jets channel on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 10b) for four split-SUSY models as a function of the $\tilde{g}$ proper decay distance $c\tau$. The models consider gluino pair production, with $[\tilde{g}\to g/qq \tilde{\chi}_1^0]$ decays, $\tilde{g}$ masses in GeV as indicated and $m(\tilde{\chi}_1^0)$ = 100 GeV. For comparison, the production cross-sections for $m(\tilde{g})$ = 400 GeV, 800 GeV and 1400 GeV are $18700\pm2800$ fb, $149\pm31$ fb and $0.71\pm0.32$ fb, respectively. A dash indicates where the limit-setting procedure did not converge or the limit is greater than $10^8$ fb.

Upper limits (95% CL) from the DV+$E_T^{miss}$ channel on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 10c) for three split-SUSY models as a function of the $\tilde{g}$ proper decay distance $c\tau$. The models consider gluino pair production, with $[\tilde{g}\to tt \tilde{\chi}_1^0]$ decays, $\tilde{g}$ masses in GeV as indicated and $m(\tilde{\chi}_1^0)$ = 100 GeV. For comparison, the production cross-sections for $m(\tilde{g})$ = 600 GeV, 1000 GeV and 1400 GeV are $1270\pm230$ fb, $22\pm6$ fb and $0.71\pm0.32$ fb, respectively.

Upper limits (95% CL) from the DV+jets channel on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 10d) for three split-SUSY models as a function of the $\tilde{g}$ proper decay distance $c\tau$. The models consider gluino pair production, with $[\tilde{g}\to tt \tilde{\chi}_1^0]$ decays, $\tilde{g}$ masses in GeV as indicated and $m(\tilde{\chi}_1^0)$ = 100 GeV. For comparison, the production cross-sections for $m(\tilde{g})$ = 600 GeV, 1000 GeV and 1400 GeV are $1270\pm230$ fb, $22\pm6$ fb and $0.71\pm0.32$ fb, respectively. A dash indicates where the limit-setting procedure did not converge.

Upper limits (95% CL) from the DV+$E_T^{miss}$ channel on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 10e) for four split-SUSY models as a function of the $\tilde{g}$ proper decay distance $c\tau$. The models consider gluino pair production, with $[\tilde{g}\to tt \tilde{\chi}_1^0]$ decays, $\tilde{g}$ masses in GeV as indicated and $m(\tilde{\chi}_1^0)$ = $m(\tilde{g}) - 480$ GeV. For comparison, the production cross-sections for $m(\tilde{g})$ = 500 GeV, 800 GeV and 1400 GeV are $4450\pm700$ fb, $149\pm31$ fb and $0.71\pm0.32$ fb, respectively.

Upper limits (95% CL) from the DV+jets channel on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 10f) for four split-SUSY models as a function of the $\tilde{g}$ proper decay distance $c\tau$. The models consider gluino pair production, with $[\tilde{g}\to tt \tilde{\chi}_1^0]$ decays, $\tilde{g}$ masses in GeV as indicated and $m(\tilde{\chi}_1^0)$ = $m(\tilde{g}) - 480$ GeV. For comparison, the production cross-sections for $m(\tilde{g})$ = 500 GeV, 800 GeV and 1400 GeV are $4450\pm700$ fb, $149\pm31$ fb and $0.71\pm0.32$ fb, respectively. A dash indicates where the limit-setting procedure did not converge.

Observed 95% CL exclusion contour in the $m(\tilde{g})$-$c\tau$ plane for the split-SUSY model with gluino production, $[\tilde{g}\to g/qq \tilde{\chi}_1^0]$ decays and $m(\tilde{\chi}_1^0)$ = 100 GeV. These results are obtained from the DV+$E_T^{miss}$ and DV+jets channels, see http://hepdata.cedar.ac.uk/view/ins1362183/d34 for details.

Expected 95% CL exclusion contour in the $m(\tilde{g})$-$c\tau$ plane for the split-SUSY model with gluino production, $[\tilde{g}\to g/qq \tilde{\chi}_1^0]$ decays and $m(\tilde{\chi}_1^0)$ = 100 GeV. These results are obtained from the DV+$E_T^{miss}$ and DV+jets channels, see http://hepdata.cedar.ac.uk/view/ins1362183/d34 for details.

Observed 95% CL exclusion contour in the $m(\tilde{g})$-$c\tau$ plane for the split-SUSY model with gluino production, $[\tilde{g}\to tt \tilde{\chi}_1^0]$ decays and $m(\tilde{\chi}_1^0)$ = 100 GeV. These results are obtained from the DV+$E_T^{miss}$ and DV+jets channels, see http://hepdata.cedar.ac.uk/view/ins1362183/d34 for details.

Expected 95% CL exclusion contour in the $m(\tilde{g})$-$c\tau$ plane for the split-SUSY model with gluino production, $[\tilde{g}\to tt \tilde{\chi}_1^0]$ decays and $m(\tilde{\chi}_1^0)$ = 100 GeV. These results are obtained from the DV+$E_T^{miss}$ and DV+jets channels, see http://hepdata.cedar.ac.uk/view/ins1362183/d34 for details.

Observed 95% CL exclusion contour in the $m(\tilde{g})$-$c\tau$ plane for the split-SUSY model with gluino production, $[\tilde{g}\to g/qq \tilde{\chi}_1^0]$ decays and $m(\tilde{\chi}_1^0)$ = $m(\tilde{g})$ - 480 GeV. These results are obtained from the DV+$E_T^{miss}$ and DV+jets channels, see http://hepdata.cedar.ac.uk/view/ins1362183/d34 for details.

Expected 95% CL exclusion contour in the $m(\tilde{g})$-$c\tau$ plane for the split-SUSY model with gluino production, $[\tilde{g}\to g/qq \tilde{\chi}_1^0]$ decays and $m(\tilde{\chi}_1^0)$ = $m(\tilde{g})$ - 480 GeV. These results are obtained from the DV+$E_T^{miss}$ and DV+jets channels, see http://hepdata.cedar.ac.uk/view/ins1362183/d34 for details.

Choice of signal region in the $m(\tilde{g})$-$c\tau$ plane for the split-SUSY models with gluino decays and neutralino masses in GeV as indicated. A value of 1 indicates that the DV+$E_T^{miss}$ channel provided the best expected constraint for that point, while a value of -1 indicates the DV+jets channel. A dash indicates where results were not calculated for a particular mass/lifetime combination.

Upper limits (95% CL) from the DV+$E_T^{miss}$ channel on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 11a) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider squark or gluino pair production, with masses in GeV as indicated, with either $\tilde{q}\to q[\tilde{\chi}_1^0\to \nu qq]$ or $\tilde{g}\to qq[\tilde{\chi}_1^0\to \nu qq]$ decays, respectively. For comparison, the production cross-sections for $m(\tilde{g})$ = 700 GeV, $m(\tilde{q})$ = 700 GeV and $m(\tilde{q})$ = 1000 GeV are $430\pm80$ fb, $124\pm17$ fb and $11.9\pm1.5$ fb, respectively.

Upper limits (95% CL) from the DV+$E_T^{miss}$ channel on the production cross-section and the corresponding event-level efficiencies (from Auxiliary Figure 11b) for four RPV SUSY models as a function of the $\tilde{\chi}_1^0$ proper decay distance $c\tau$. The models consider squark pair production, with $\tilde{q}\to q\tilde{\chi}_1^0$ decays and masses in GeV as indicated. For comparison, the production cross-sections for $m(\tilde{q})$ = 700 GeV and 1000 GeV are $124\pm17$ fb and $11.9\pm1.5$ fb, respectively.

Vertex mass distributions in data and one RPV SUSY signal model, for vertices with 3, 4 and $\geq$5 tracks in the DV+muon channel. The entries are the number of DVs in each bin, not normalized according to bin size. The signal model is for squark pair production, with $\tilde{q}\to q[\tilde{\chi}_1^0\to\mu qq]$ decays, $m(\tilde{q})$ = 700 GeV, $m(\tilde{\chi}_1^0)$ = 494 GeV and $c\tau(\tilde{\chi}_1^0)$ = 175 mm.

Vertex mass distributions in data and one GGM SUSY signal model, for vertices with 3, 4 and $\geq$5 tracks in the DV+jets channel. The entries are the number of DVs in each bin, not normalized according to bin size. The signal model is for gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to Z\tilde{G}]$ decays, $m(\tilde{g})$ = 1100 GeV, $m(\tilde{\chi}_1^0)$ = 400 GeV and $c\tau(\tilde{\chi}_1^0)$ = 175 mm.

Vertex mass distributions in data and one RPV SUSY signal model, for vertices with 3, 4 and $\geq$5 tracks in the DV+electron channel. The entries are the number of DVs in each bin, not normalized according to bin size. The signal model is for squark pair production, with $\tilde{q}\to q[\tilde{\chi}_1^0\to e qq]$ decays, $m(\tilde{q})$ = 700 GeV, $m(\tilde{\chi}_1^0)$ = 494 GeV and $c\tau(\tilde{\chi}_1^0)$ = 175 mm.

Vertex mass distributions in data and one split-SUSY signal model, for vertices with 3, 4 and $\geq$5 tracks in the DV+$E_T^{miss}$ channel. The entries are the number of DVs in each bin, not normalized according to bin size. The signal model is for gluino pair production, with $[\tilde{g}\to g/qq \tilde{\chi}_1^0]$ decays, $m(\tilde{g})$ = 1400 GeV, $m(\tilde{\chi}_1^0)$ = 100 GeV and $c\tau(\tilde{g})$ = 175 mm.

Vertex mass distributions in data and one RPV SUSY signal model, for vertices with 0, 1 and $\geq$2 charged leptons in the dilepton $e^+e^-$ channel. The entries are the number of DVs in each bin, not normalized according to bin size. The signal model is for gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to e\mu\nu/ee\nu]$ decays, $m(\tilde{g})$ = 1300 GeV, $m(\tilde{\chi}_1^0)$ = 50 GeV and $c\tau(\tilde{\chi}_1^0)$ = 30 mm.

Vertex mass distributions in data and one RPV SUSY signal model, for vertices with 0, 1 and $\geq$2 charged leptons in the dilepton $e^{\pm}\mu^{\mp}$ channel. The entries are the number of DVs in each bin, not normalized according to bin size. The signal model is for gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to e\mu\nu/ee\nu]$ decays, $m(\tilde{g})$ = 1300 GeV, $m(\tilde{\chi}_1^0)$ = 50 GeV and $c\tau(\tilde{\chi}_1^0)$ = 30 mm.

Vertex mass distributions in data and one RPV SUSY signal model, for vertices with 0, 1 and $\geq$2 charged leptons in the dilepton $\mu^+\mu^-$ channel. The entries are the number of DVs in each bin, not normalized according to bin size. The signal model is for gluino pair production, with $\tilde{g}\to qq[\tilde{\chi}_1^0\to e\mu\nu/\mu\mu\nu]$ decays, $m(\tilde{g})$ = 1300 GeV, $m(\tilde{\chi}_1^0)$ = 50 GeV and $c\tau(\tilde{\chi}_1^0)$ = 30 mm.

Details of sparticle decay modes, model parameters, approximate number of generated events $N_{\rm evts}$ and total production cross-section $\sigma$ for selected models considered in this analysis. The long-lived particle (LLP) is the $\tilde{\chi}_1^0$ in all cases except for the model used for DV+$E_T^{miss}$, where it is the $\tilde{g}$. Events in some models are filtered to make better use of computing resources, details are given in the original table and the associated efficiency is already taken into account in the quoted cross-sections.

Numbers of events satisfying each selection criterion in turn for the DV+muon channel, using the model listed in http://hepdata.cedar.ac.uk/view/ins1362183/d44. The ''Filter and trigger'' line includes the requirements placed on the primary vertex.

Numbers of events satisfying each selection criterion in turn for the DV+electron channel, using the model listed in http://hepdata.cedar.ac.uk/view/ins1362183/d44. The ''Filter and trigger'' line includes the requirements placed on the primary vertex.

Numbers of events satisfying each selection criterion in turn for the DV+jets channel, using the model listed in http://hepdata.cedar.ac.uk/view/ins1362183/d44. The ''Filter and trigger'' line includes the requirements placed on the primary vertex.

Numbers of events satisfying each selection criterion in turn for the DV+$E_T^{miss}$ channel, using the model listed in http://hepdata.cedar.ac.uk/view/ins1362183/d44. The ''Filter and trigger'' line includes the requirements placed on the primary vertex.

Numbers of events satisfying each selection criterion in turn for the dilepton $e^+e^-$ channel, using the model listed in http://hepdata.cedar.ac.uk/view/ins1362183/d44. The ''Trigger'' line includes the event-level cosmic-muon veto and the requirements placed on the primary vertex, but not the offline filter selection. This is included in the ''Lepton reconstruction and DV match'' line, along with all other requirements placed on offline-reconstructed leptons. About 20,000 events of the full sample are analyzed, which contain an equal mixture of $\tilde{\chi}_1^0 \to e^{\pm}\mu^{\mp}\nu$ and $\tilde{\chi}_1^0 \to e^+e^-\nu$ decays.

Numbers of events satisfying each selection criterion in turn for the dilepton $e^{\pm}\mu^{\mp}$ channel, using the model listed in http://hepdata.cedar.ac.uk/view/ins1362183/d44. The ''Trigger'' line includes the event-level cosmic-muon veto and the requirements placed on the primary vertex, but not the offline filter selection. This is included in the ''Lepton reconstruction and DV match'' line, along with all other requirements placed on offline-reconstructed leptons. The sample contains about 50% $\tilde{\chi}_1^0 \to e^{\pm}\mu^{\mp}\nu$ decays, 25% $\tilde{\chi}_1^0 \to e^+e^-\nu$ and 25% $\tilde{\chi}_1^0 \to \mu^+\mu^-\nu$ decays.

Numbers of events satisfying each selection criterion in turn for the dilepton $\mu^+\mu^-$ channel, using the model listed in http://hepdata.cedar.ac.uk/view/ins1362183/d44. The ''Trigger'' line includes the event-level cosmic-muon veto and the requirements placed on the primary vertex, but not the offline filter selection. This is included in the ''Lepton reconstruction and DV match'' line, along with all other requirements placed on offline-reconstructed leptons. About 20,000 events of the full sample are analyzed, which contain an equal mixture of $\tilde{\chi}_1^0 \to e^{\pm}\mu^{\mp}\nu$ and $\tilde{\chi}_1^0 \to \mu^+\mu^-\nu$ decays.

Efficiency for the calorimetric MET>80 GeV trigger as a function of the metastable R-hadron mass. The R-hadron decays to g/qq plus neutralino of mass = m(gluino) - 100 GeV with a lifetime of 1 ns.

Efficiency for the calorimetric MET>80 GeV trigger as a function of the metastable R-hadron mass. The R-hadron decays to g/qq plus neutralino of mass 100 GeV with a lifetime of 1 ns.

Efficiency for the calorimetric MET>80 GeV trigger as a function of the stable chargino mass.

Total selection efficiency as a function of the stable R-hadron mass.

Total selection efficiency as a function of the metastable R-hadron mass. The R-hadron decays to g/qq plus neutralino of mass 100 GeV with a lifetime of 10 ns.

Total selection efficiency as a function of the metastable R-hadron mass. The R-hadron decays to g/qq plus neutralino of mass = m(gluino) - 100 GeV with a lifetime of 10 ns.

Total selection efficiency as a function of the metastable R-hadron mass. The R-hadron decays to g/qq plus neutralino of mass 100 GeV with a lifetime of 1 ns.

Total selection efficiency as a function of the stable chargino mass.

Ionisation distribution of all the CR2 tracks, and those not matched to a reconstructed muon. The two distributions are normalised to their total number of entries.

Distribution of the mass of selected candidates, derived from the specific ionisation loss, for an example of gluino R-hadron signal, for searches for stable particles. The signal distributions are stacked on the expected background, and a narrower binning is used for them to allow the signal shape to be seen more clearly. The number of signal events is that expected according to the theoretical cross sections.

Distribution of the mass of selected candidates, derived from the specific ionisation loss, for one example of chargino signal, for searches for stable particles. The signal distributions are stacked on the expected background, and a narrower binning is used for them to allow the signal shape to be seen more clearly. The number of signal events is that expected according to the theoretical cross sections.

Distribution of the mass of selected candidates, derived from the specific ionisation loss, for background and data, for searches for stable particles. The expected background is shown with its total uncertainty (sum in quadrature of statistical, normalisation and systematic errors).

Distribution of the mass of selected candidates, derived from the specific ionisation loss, for an example of gluino R-hadron signal, for searches for metastable particles. The signal distributions are stacked on the expected background, and a narrower binning is used for them to allow the signal shape to be seen more clearly. The number of signal events is that expected according to the theoretical cross sections.

Distribution of the mass of selected candidates, derived from the specific ionisation loss, for an example of chargino signal, for searches for metastable particles. The signal distributions are stacked on the expected background, and a narrower binning is used for them to allow the signal shape to be seen more clearly. The number of signal events is that expected according to the theoretical cross sections.

Distribution of the mass of selected candidates, derived from the specific ionisation loss, for background and data. The expected background is shown with its total uncertainty (sum in quadrature of statistical, normalisation and systematic errors).

Theoretical values for the cross section of gluino pairs production with their uncertainty.

Expected upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau =10 ns, decaying into g/qq plus a light neutralino of mass 100 GeV, in the background-only case, with its 1 sigma band.

Observed 95 PCT upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau =10 ns, decaying into g/qq plus a light neutralino of mass 100 GeV.

Expected upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau =10 ns, decaying into g/qq plus a heavy neutralino of mass(gluino) - 100 GeV, in the background-only case, with its 1 sigma band.

Observed 95 PCT upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau =10 ns, decaying into g/qq plus a heavy neutralino of mass(gluino) - 100 GeV.

The expected excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into g/qq plus a light neutralino of mass 100 GeV, with respect to the nominal theoretical cross section.

The expected excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into g/qq plus a light neutralino of mass 100 GeV, with respect to the nominal theoretical cross section, plus 1 experimental sigma.

The expected excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into g/qq plus a light neutralino of mass 100 GeV, with respect to the nominal theoretical cross section, minus 1 experimental sigma.

The observed excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into g/qq plus a light neutralino of mass 100 GeV, with respect to the nominal theoretical cross section.

The observed excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into g/qq plus a light neutralino of mass 100 GeV, with respect to the nominal theoretical cross section minus its uncertainty.

The observed excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into g/qq plus a light neutralino of mass 100 GeV, with respect to the nominal theoretical cross section plus its uncertainty.

The expected excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into g/qq plus a heavy neutralino of mass = m(gluino) - 100 GeV, with respect to the nominal theoretical cross section.

The expected excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into g/qq plus a heavy neutralino of mass = m(gluino) - 100 GeV, with respect to the nominal theoretical cross section, plus 1 experimental sigma.

The expected excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into g/qq plus a heavy neutralino of mass = m(gluino) - 100 GeV, with respect to the nominal theoretical cross section, minus 1 experimental sigma.

The observed excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into g/qq plus a heavy neutralino of mass = m(gluino) - 100 GeV, with respect to the nominal theoretical cross section.

The observed excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into g/qq plus a heavy neutralino of mass = m(gluino) - 100 GeV, with respect to the nominal theoretical cross section minus its uncertainty.

The observed excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into g/qq plus a heavy neutralino of mass = m(gluino) - 100 GeV, with respect to the nominal theoretical cross section plus its uncertainty.

Expected upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau =10 ns, decaying into tt plus a light neutralino of mass 100 GeV, in the background-only case, with its 1 sigma band.

Observed 95 PCT upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau =10 ns, decaying into tt plus a light neutralino of mass 100 GeV.

Expected upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau =10 ns, decaying into tt plus a heavy neutralino of mass(gluino) - 100 GeV, in the background-only case, with its 1 sigma band.

Observed 95 PCT upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau =10 ns, decaying into tt plus a heavy neutralino of mass(gluino) - 100 GeV.

The expected excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into tt plus a light neutralino of mass 100 GeV, with respect to the nominal theoretical cross section.

The expected excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into tt plus a light neutralino of mass 100 GeV, with respect to the nominal theoretical cross section, plus 1 experimental sigma.

The expected excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into tt plus a light neutralino of mass 100 GeV, with respect to the nominal theoretical cross section, minus 1 experimental sigma.

The observed excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into tt plus a light neutralino of mass 100 GeV, with respect to the nominal theoretical cross section.

The observed excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into tt plus a light neutralino of mass 100 GeV, with respect to the nominal theoretical cross section minus its uncertainty.

The observed excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into tt plus a light neutralino of mass 100 GeV, with respect to the nominal theoretical cross section plus its uncertainty.

The expected excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into tt plus a heavy neutralino of mass = m(gluino) - 100 GeV, with respect to the nominal theoretical cross section.

The expected excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into tt plus a heavy neutralino of mass = m(gluino) - 100 GeV, with respect to the nominal theoretical cross section, plus 1 experimental sigma.

The expected excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into tt plus a heavy neutralino of mass = m(gluino) - 100 GeV, with respect to the nominal theoretical cross section, minus 1 experimental sigma.

The observed excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into tt plus a heavy neutralino of mass = m(gluino) - 100 GeV, with respect to the nominal theoretical cross section.

The observed excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into tt plus a heavy neutralino of mass = m(gluino) - 100 GeV, with respect to the nominal theoretical cross section minus its uncertainty.

The observed excluded range of lifetimes as a function of gluino mass for gluino R-hadrons decaying into tt plus a heavy neutralino of mass = m(gluino) - 100 GeV, with respect to the nominal theoretical cross section plus its uncertainty.

Theoretical values for the production cross section of charginos or chargino/neutralino pairs, with their uncertainty.

Expected upper limits on the production cross section as a function of mass for metastable charginos, with lifetime tau =1.0 ns, decaying into neutralino + pion, in the background-only case, with its 1 sigma band.

Observed 95 PCT upper limits on the production cross section as a function of mass for metastable charginos, with lifetime tau =1.0 ns, decaying into neutralino + pion.

The expected excluded range of lifetimes as a function of chargino mass for charginos decaying into neutralino plus pion, with respect to the nominal theoretical cross section.

The expected excluded range of lifetimes as a function of chargino mass for charginos decaying into neutralino plus pion, with respect to the nominal theoretical cross section, plus 1 experimental sigma.

The expected excluded range of lifetimes as a function of chargino mass for charginos decaying into neutralino plus pion, with respect to the nominal theoretical cross section, minus 1 experimental sigma.

The observed excluded range of lifetimes as a function of chargino mass for charginos decaying into neutralino plus pion, with respect to the nominal theoretical cross section.

The observed excluded range of lifetimes as a function of chargino mass for charginos decaying into neutralino plus pion, with respect to the nominal theoretical cross section minus its uncertainty.

The observed excluded range of lifetimes as a function of gluino mass for chargino mass for charginos decaying into neutralino plus pion, with respect to the nominal theoretical cross section plus its uncertainty.

dEdx ionization for data, 1 TeV gluino R-hadrons stable and decaying in 100 GeV neutralinos with a 10 ns lifetime and for charginos of 350 GeV. Tracks that fulfil all the requirements up to including the High-m_T (see Tab.1 in the paper) are considered at this stage and normalised to an integrated luminosity of 18.4 fb^-1.

Expected upper limits on the production cross section as a function of mass for stable gluino R-hadrons, in case of background only, with its 1 sigma band.

Observed 95 PCT upper limits on the production cross section as a function of mass for stable gluino R-hadrons.

Theoretical values for the cross section of squark pairs production with their uncertainty.

Expected upper limits on the production cross section as a function of mass for stable sbottom R-hadrons, in case of background only, with its 1 sigma band.

Observed 95 PCT upper limits on the production cross section as a function of mass for stable sbottom $R$-hadrons. Cross section IN PB.

Expected upper limits on the production cross section as a function of mass for stop R-hadrons, in case of background only, with its 1 sigma band.

Observed 95 PCT upper limits on the production cross section as a function of mass for stop R-hadrons.

Expected upper limits on the production cross section as a function of mass for stable charginos, in case of background only, with its 1 sigma band.

Observed 95 PCT upper limits on the production cross section as a function of mass for stable charginos.

Expected upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau=1.0 ns, decaying to g/qq plus a light neutralino of mass 100 GeV.

Observed 95 PCT upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau=1.0 ns, decaying to g/qq plus a light neutralino of mass 100 GeV.

Expected upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau=1.0 ns, decaying to g/qq plus a heavy neutralino of mass = m(gluino) - 100 GeV.

Observed 95 PCT upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau=1.0 ns, decaying to g/qq plus a heavy neutralino of mass = m(gluino) - 100 GeV.

Expected upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau=1.0 ns, decaying to tt plus a light neutralino of mass 100 GeV.

Observed 95 PCT upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau=1.0 ns, decaying to tt plus a light neutralino of mass 100 GeV.

Expected upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau=1.0 ns, decaying to tt plus a heavy neutralino of mass = m(gluino) - 100 GeV.

Observed 95 PCT upper limits on the production cross section as a function of mass for metastable gluino R-hadrons, with lifetime tau=1.0 ns, decaying to tt plus a heavy neutralino of mass = m(gluino) - 100 GeV.

Expected upper limits on the production cross section as a function of mass for metastable charginos, with lifetime tau =15 ns, decaying to neutralino and pion, in case of background only, with its 1 sigma band.

Observed 95 PCT upper limits on the production cross section as a function of mass for metastable charginos, with lifetime tau =15 ns, decaying to neutralino and pion, in case of background only, with its 1 sigma band.

Excluded range of lifetimes as a function of gluino R-hadron mass. The central value of the lower-limit of the observed and expected excluded masses at the 95% CL is given.

Cross-section as a function of mass for stable gluino R-hadrons. The central value of the observed and expected 95% upper limit on excluded cross-section is given. The 1 sigma band on the expected UL is given as an uncertainty.

Expected (dashed black line) and observed (solid red line) 95% CL exclusion limits on the higgsino simplified model being considered. These are shown with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively. The limits set by the latest ATLAS searches using the soft lepton and disappearing track signatures are illustrated by the blue and green regions, respectively, while the limit imposed by the LEP experiments is shown in gray. The dot-dashed gray line indicates the predicted mass-splitting for the pure higgsino scenario.

Expected (dashed black line) and observed (solid red line) 95% CL exclusion limits on the higgsino simplified model being considered. These are shown with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively. The limits set by the latest ATLAS searches using the soft lepton and disappearing track signatures are illustrated by the blue and green regions, respectively, while the limit imposed by the LEP experiments is shown in gray. The dot-dashed gray line indicates the predicted mass-splitting for the pure higgsino scenario.

Expected (dashed black line) and observed (solid red line) 95% CL exclusion limits on the higgsino simplified model being considered. These are shown with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively. The limits set by the latest ATLAS searches using the soft lepton and disappearing track signatures are illustrated by the blue and green regions, respectively, while the limit imposed by the LEP experiments is shown in gray. The dot-dashed gray line indicates the predicted mass-splitting for the pure higgsino scenario.

Expected (dashed black line) and observed (solid red line) 95% CL exclusion limits on the higgsino simplified model being considered. These are shown with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively. The limits set by the latest ATLAS searches using the soft lepton and disappearing track signatures are illustrated by the blue and green regions, respectively, while the limit imposed by the LEP experiments is shown in gray. The dot-dashed gray line indicates the predicted mass-splitting for the pure higgsino scenario.

Expected and observed CLs values per signal point represented by the grey numbers. The expected (dashed) and observed (solid) 95% CL exclusion limits are overlaid along with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively.

Expected and observed CLs values per signal point represented by the grey numbers. The expected (dashed) and observed (solid) 95% CL exclusion limits are overlaid along with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively.

Expected and observed cross-section upper-limit per signal point represented by the grey numbers. The expected (dashed) and observed (solid) 95% CL exclusion limits are overlaid along with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively.

Expected and observed cross-section upper-limit per signal point represented by the grey numbers. The expected (dashed) and observed (solid) 95% CL exclusion limits are overlaid along with $\pm 1\sigma_{\mathrm{exp}}$ (yellow band) from experimental systematic and statistical uncertainties, and with $\pm 1\sigma_{\mathrm{theory}}^{\mathrm{SUSY}}$ (red dotted lines) from signal cross-section uncertainties, respectively.

Truth-level signal acceptances for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$) in a SR with the $S(d_0)$ requirement removed. The acceptance is defined as the fraction of accepted events divided by the total number of events in the generator-level signal Monte Carlo simulation, where the signal candidate track is identified as the charged particle with the largest distance between the interaction vertex and the secondary vertex of the higgsino decays.

Truth-level signal acceptances for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$) in a SR with the $S(d_0)$ requirement removed. The acceptance is defined as the fraction of accepted events divided by the total number of events in the generator-level signal Monte Carlo simulation, where the signal candidate track is identified as the charged particle with the largest distance between the interaction vertex and the secondary vertex of the higgsino decays.

Truth-level signal acceptances for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$) in a SR with the $S(d_0)$ requirement removed. The acceptance is defined as the fraction of accepted events divided by the total number of events in the generator-level signal Monte Carlo simulation, where the signal candidate track is identified as the charged particle with the largest distance between the interaction vertex and the secondary vertex of the higgsino decays.

Truth-level signal acceptances for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$) in a SR with the $S(d_0)$ requirement removed. The acceptance is defined as the fraction of accepted events divided by the total number of events in the generator-level signal Monte Carlo simulation, where the signal candidate track is identified as the charged particle with the largest distance between the interaction vertex and the secondary vertex of the higgsino decays.

Truth-level signal acceptances for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$) in a SR with the $S(d_0)$ requirement removed. The acceptance is defined as the fraction of accepted events divided by the total number of events in the generator-level signal Monte Carlo simulation, where the signal candidate track is identified as the charged particle with the largest distance between the interaction vertex and the secondary vertex of the higgsino decays.

Truth-level signal acceptances for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$) in a SR with the $S(d_0)$ requirement removed. The acceptance is defined as the fraction of accepted events divided by the total number of events in the generator-level signal Monte Carlo simulation, where the signal candidate track is identified as the charged particle with the largest distance between the interaction vertex and the secondary vertex of the higgsino decays.

Signal efficiencies in SR-Low for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.

Signal efficiencies in SR-Low for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.

Signal efficiencies in SR-Low for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.

Signal efficiencies in SR-Low for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.

Signal efficiencies in SR-Low for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.

Signal efficiencies in SR-Low for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.

Signal efficiencies in SR-High for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.

Signal efficiencies in SR-High for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.

Signal efficiencies in SR-High for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.

Signal efficiencies in SR-High for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.

Signal efficiencies in SR-High for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.

Signal efficiencies in SR-High for each production process ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$), defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level, where the $S(d_0)$ selecton efficiency has the largest impact. The higgsino decay products from $\Delta \mathrm{m}(\tilde{\chi}_1^\pm,\tilde{\chi}_1^0) < 0.4$ GeV signal have $p_{\mathrm{T}}$ too low to be reconstructed as the signal candidate tracks, and therefore the identified signal candidate tracks are typically from pile-up collisions or underlying events similar to the QCD track background, causing a low $S(d_0)$ selection efficiency in these plots.

Event selection cutflows for signal samples with $m(\tilde{\chi}_{1}^0)$ = 150 GeV and $\Delta m(\tilde{\chi}_{1}^\pm, \tilde{\chi}_{1}^0)$ = 1.5, 1.0, and 0.75 GeV, including all six production processes ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$). The cross-section used to obtain the initial number of events ($\sigma(\mathrm{n}_{\mathrm{jets}}) \geq 1$) refers to an emission of at least one gluon or quark with $p_{\mathrm{T}} > 50$ GeV at the parton level.

Event selection cutflows for signal samples with $m(\tilde{\chi}_{1}^0)$ = 150 GeV and $\Delta m(\tilde{\chi}_{1}^\pm, \tilde{\chi}_{1}^0)$ = 0.5, 0.35, and 0.25 GeV, including all six production processes ($\tilde{\chi}_1^\pm \tilde{\chi}_1^0$, $\tilde{\chi}_1^\pm \tilde{\chi}_2^0$, $\tilde{\chi}_1^+ \tilde{\chi}_1^-$, and $\tilde{\chi}_2^0 \tilde{\chi}_1^0$). The cross-section used to obtain the initial number of events ($\sigma(\mathrm{n}_{\mathrm{jets}}) \geq 1$) refers to an emission of at least one gluon or quark with $p_{\mathrm{T}} > 50$ GeV at the parton level.

Trigger efficiency for simulated signal events as a function of the LLP decay position in the x&ndash;y plane (L_xy) for LLPs decaying in the barrel (|&eta;|&lt;1.4) for one of the low-E_T signal samples for HLT CalRatio triggers seeded by the high-E_T L1 triggers with E_T thresholds of 60 GeV and 100 GeV and by the two versions of the low-E_T L1 triggers. Only statistical uncertainties are shown.

Trigger efficiency for simulated signal events as a function of the LLP decay position in the x&ndash;y plane (L_xy) for LLPs decaying in the barrel (|&eta;|&lt;1.4) for one of the high-E_T signal samples for HLT CalRatio triggers seeded by the high-E_T L1 triggers with E_T thresholds of 60 GeV and 100 GeV and by the two versions of the low-E_T L1 triggers. Only statistical uncertainties are shown.

The NN output scores in the dijet control region for the low-E_T training with no adversary network. Statistical uncertainties are shown in all plots. In cases where training with adversary networks is considered, the systematic uncertainty related to modelling discrepancies is included as well.

The NN output scores in the dijet control region for the low-E_T training with an adversary network included. Statistical uncertainties are shown in all plots. In cases where training with adversary networks is considered, the systematic uncertainty related to modelling discrepancies is included as well.

The NN output scores in the dijet control region for the high-E_T training with no adversary network. Statistical uncertainties are shown in all plots. In cases where training with adversary networks is considered, the systematic uncertainty related to modelling discrepancies is included as well.

The NN output scores in the dijet control region for the high-E_T training with an adversary network included. Statistical uncertainties are shown in all plots. In cases where training with adversary networks is considered, the systematic uncertainty related to modelling discrepancies is included as well.

Distribution of the low-E_T per-event BDT in main data, BIB data and some of the benchmark signal samples after preselection. Only statistical uncertainties are shown.

Distribution of the high-E_T per-event BDT outputs in main data, BIB data and some of the benchmark signal samples after preselection. Only statistical uncertainties are shown.

Sequential impact of each requirement on the number of events passing the selection for the high-E_T selections. The signal columns represent the cumulative fraction of events passing the selection than the number of events.

Sequential impact of each requirement on the number of events passing the selection for the low-E_T selections. The signal columns represent the cumulative fraction of events passing the selection than the number of events.

Application of the modified ABCD method to the final high-E_T selections. The a priori estimate refers to the "pre-unblinding" case, where the data in region A are ignored by removing the Poisson constraint in that region and the signal strength is fixed to zero. This matches the simple N^bkg_A=(N^bkg_B&middot; N^bkg_C)/N^bkg_D relation. The a posteriori estimate refers to the "post-unblinding" case, including the observed data in region A in the background-only global fit, obtained by fixing the signal strength to 0 (background-only fit) or allowing it to float (signal-plus-background fit). The table also shows one set of representative signal yields in each selection for the signal-plus-background fit. Only statistical uncertainties are included in the quoted error of the background, while the uncertainties in the signal include those from both statistical and experimental sources.

Application of the modified ABCD method to the final low-E_T selections. The a priori estimate refers to the "pre-unblinding" case, where the data in region A are ignored by removing the Poisson constraint in that region and the signal strength is fixed to zero. This matches the simple N^bkg_A=(N^bkg_B&middot; N^bkg_C)/N^bkg_D relation. The a posteriori estimate refers to the "post-unblinding" case, including the observed data in region A in the background-only global fit, obtained by fixing the signal strength to 0 (background-only fit) or allowing it to float (signal-plus-background fit). The table also shows one set of representative signal yields in each selection for the signal-plus-background fit. Only statistical uncertainties are included in the quoted error of the background, while the uncertainties in the signal include those from both statistical and experimental sources.

95% CL expected and observed limits on the BR of SM Higgs bosons to pairs of neutral LLPs (B_{H&rarr; ss}), showing the &plusmn; 1 &sigma; (green) and &plusmn; 2 &sigma; (yellow) expected limit bands, as well as a comparison with the results from previous ATLAS searches [36,78]. The cross-section for SM Higgs boson gluon--gluon fusion production is assumed to be 48.6 pb.

Trigger efficiency of simulated signal events as a function of the LLP decay position in the z direction for LLPs decaying in the calorimeter endcaps (1.4 &le; |&eta;| &lt; 2.5) for one of the low-E_T signal samples for HLT CalRatio triggers seeded by the 60 GeV-high-E_T trigger and by the two versions of the low-E_T triggers.

Trigger efficiency of simulated signal events as a function of the LLP decay position in the z direction for LLPs decaying in the calorimeter endcaps (1.4 &le; |&eta;| &lt; 2.5) for one of the high-E_T signal samples for HLT CalRatio triggers seeded by the 60 GeV-high-E_T trigger and by the two versions of the low-E_T triggers.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The simulated efficiencies as a function of c times the mean proper lifetime (c&tau;) of s for several different MC samples. A weight-based extrapolation procedure is used to determine the efficiency at a given mean proper lifetime.

The event BDT in the dijet control region for the low-E_T training training. The uncertainties are combined statistical and ML modelling systematic uncertainty.

The event BDT in the dijet control region for the high-E_T training. The uncertainties are combined statistical and ML modelling systematic uncertainty.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; mass of 60 GeV compared to the results from the 2016-data analysis and subsequent combinations, where available.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; mass of 60 GeV compared to the results from the 2016-data analysis and subsequent combinations, where available.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; mass 125 GeV, compared to the results from the 2016-data analysis and subsequent combinations, where available.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; mass 125 GeV, compared to the results from the 2016-data analysis and subsequent combinations, where available. The 125 GeV mediator is assumed to be the SM Higgs boson.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; mass 125 GeV, compared to the results from the 2016-data analysis and subsequent combinations, where available. The 125 GeV mediator is assumed to be the SM Higgs boson.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; mass of 200 GeV, compared to the results from the 2016-data analysis and subsequent combinations, where available.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; mass of 400 GeV, compared to the results from the 2016-data analysis and subsequent combinations, where available.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; mass 600 GeV, compared to the results from the 2016-data analysis and subsequent combinations, where available.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; mass of 600 GeV, compared to the results from the 2016-data analysis and subsequent combinations, where available.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; masses of of 1000 GeV, compared to the results from the 2016-data analysis and subsequent combinations, where available.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; masses of of 1000 GeV, compared to the results from the 2016-data analysis and subsequent combinations, where available.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; masses of of 1000 GeV, compared to the results from the 2016-data analysis and subsequent combinations, where available.

The 95% CL observed limits, expected limits and &plusmn; 1 &sigma; and 2 &sigma; bands for the &Phi; masses of of 1000 GeV, compared to the results from the 2016-data analysis and subsequent combinations, where available.

Efficiency for an event to enter Region A of the high-E_T selection, as a function of the two LLP kinematics, decay type and decay position. LLP p_T is binned in the ranges of [0, 50 , 100, 200 , 400, 1600] GeV (5 bins), the LLP decay position is binned in decay position in L_xy in [0, 1.5, 2, 2.5, 3, 3.5, 3.9, &infin;] m for LLPs with |&eta;| &lt; 1.5 and L_z in [0, 3.6, 4.2, 4.8, 5.5, 6, &infin; ] m for LLPs with |&eta;|geq1.5, 13 bins in all. Finally, four decay types are considered: LLPs decaying to pairs of c, b, t, or &tau; in bins 0, 1, 2, 3 respectively. The efficiency is presented as a function of "Bin Index", which is calculated as follows: Bin Index = (decay position bin index ) &times; (number of p_T bins &times; number of decay type bins) + p_T bin index * (number of decay type bin) + decay type bin index. The efficiency for a given pair-produced LLP sample can be obtained by summing the efficiency values for each event as extracted from this map, and dividing it by the total number of events in the sample. The efficiency map is symmetric between the LLPs, so the choice of LLP1 and LLP2 is arbitrary. For the high-E_T selections, for overall efficiencies above 0.5%, the results are typically accurate to around 25%, but below this the efficiency can be overestimated and therefore should not be used for re-interpration.

Efficiency for an event to enter Region A of the low-E_T selection, as a function of the two LLP kinematics, decay type and decay position. LLP p_T is binned in the ranges of [0, 50 , 100, 200 , 400, 1600] GeV (5 bins), the LLP decay position is binned in L_xy in [0, 1.5, 2, 2.5, 3, 3.5, 3.9, &infin;] m for LLPs with |&eta;| &lt; 1.5 and L_z in [0, 3.6, 4.2, 4.8, 5.5, 6, &infin; ] m for LLPs with |&eta;|geq1.5, 13 bins in all. Finally, four decay types are considered: LLPs decaying to pairs of c, b, t, or &tau; in bins 0, 1, 2, 3 respectively. The efficiency is presented as a function of "Bin Index", which is calculated as follows: Bin Index = (decay position bin index ) &times; (number of p_T bins &times; number of decay type bins) + p_T bin index * (number of decay type bin) + decay type bin index. The efficiency for a given pair-produced LLP sample can be obtained by summing the efficiency values for each event as extracted from this map, and dividing it by the total number of events in the sample. The efficiency map is symmetric between the LLPs, so the choice of LLP1 and LLP2 is arbitrary. For the low-E_T selections, for overall efficiencies above 0.15%, the results are typically accurate to around 33%, and below this the efficiency is typically accurate up to a factor of 3.

Upper 95% CL limits on the Z' production cross-section times branching ratio to two electrons as a function of Z' pole mass.

Upper 95% CL limits on the Z' production cross-section times branching ratio to two muons as a function of Z' pole mass.

Upper 95% CL limits on the Z' production cross-section times branching ratio to two leptons as a function of Z' pole mass.

Upper 95% CL limits on the acceptance times Z' production cross-section times branching ratio to two leptons in the dielectron channel as a function of Z' pole mass. Expected limits in the dielectron channel for different widths with an applied mass window of two times the true width of the signal around the pole mass.

Upper 95% CL limits on the acceptance times Z' production cross-section times branching ratio to two leptons in the dielectron channel as a function of Z' pole mass. Observed limits in the dielectron channel for different widths with an applied mass window of two times the true width of the signal around the pole mass.

Upper 95% CL limits on the acceptance times Z' production cross-section times branching ratio to two leptons in the dimuon channel as a function of Z' pole mass. Expected limits in the dimuon channel for different widths with an applied mass window of two times the true width of the signal around the pole mass.

Upper 95% CL limits on the acceptance times Z' production cross-section times branching ratio to two leptons in the dimuon channel as a function of Z' pole mass. Observed limits in the dimuon channel for different widths with an applied mass window of two times the true width of the signal around the pole mass.

Upper 95% CL limits on the acceptance times Z' production cross-section times branching ratio to two leptons in the combined dilepton channel as a function of Z' pole mass. Expected limits in the dilepton channel for different widths with an applied mass window of two times the true width of the signal around the pole mass.

Upper 95% CL limits on the acceptance times Z' production cross-section times branching ratio to two leptons in the dilepton channel as a function of Z' pole mass. Observed limits in the dilepton channel for different widths with an applied mass window of two times the true width of the signal around the pole mass.

Lower limits at 95$\%$ CL on $\Lambda$ for the dimuon channel for different signal chiralities in the (constructive/destructive interference) SRs of the analysis.

Lower limits at 95$\%$ CL on $\Lambda$ for the dilepton combination for different signal chiralities in the (constructive/destructive interference) SRs of the analysis.

The dielectron data events passing the full selection.

The dimuon data events passing the full selection.

Spectrum of ETmiss for the muon channel after the event selection. The spectrum is shown with the requirement MT > 252 GeV.

Spectrum of MT for the electron channel after the event selection.

Spectrum of MT for the muon channel after the event selection.

Observed and expected limits on SIGMA*B for WPRIME at 95% CL in the electron channel.

Observed and expected limits on SIGMA*B for W* at 95% CL in the electron channel.

Observed and expected limits on SIGMA*B for WPRIME at 95% CL in the muon channel.

Observed and expected limits on SIGMA*B for W* at 95% CL in the muon channel.

Observed and expected limits on SIGMA*B for WPRIME at 95% CL for the combination of the electron and muon channels.

Observed and expected limits on SIGMA*B for W* at 95% CL for the combination of the electron and muon channels.

Observed limits on M* as a function of the DM particle mass M(chi) at 90% CL for the combination of the electron and muon channel for various operators in the EFT.

Observed limits on the DM-nucleon scattering cross-section as a function of M(chi) at 90% CL for various operators in the EFT.

Observed limits on M* as a function of the DM particle mass M(chi) at 90% CL in the electron for various operators in the EFT.

Observed limits on M* as a function of the DM particle mass M(chi) at 90% CL in the muon for various operators in the EFT.

Observed limits on M* as a function of the DM particle mass M(chi) at 95% CL in the electron for various operators in the EFT.

Observed limits on M* as a function of the DM particle mass M(chi) at 95% CL in the muon for various operators in the EFT.

Observed limits on M* as a function of the DM particle mass M(chi) at 95% CL for the combination of the electron and muon channel for various operators in the EFT.

Distributions of $s_{\text{T}}$ in the single-tau one-bin SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.

Distributions of $m_{\text{T}}(\tau)$ in the single-tau one-bin SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.

Distributions of $\Sigma m_{\text{T}}(b_{1,2})$ in the single-tau $p_{\text{T}}(\tau)$-binned SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.

Distributions of $p_{\text{T}}(\tau)$ in the single-tau $p_{\text{T}}(\tau)$-binned SR. The stacked histograms show the various SM background contributions. The hatched band indicates the total statistical and systematic uncertainty of the SM background. The $t\bar{t}$ (2 real $\tau$) and $t\bar{t}$ (1 real $\tau$) as well as the single-top background contributions are scaled with the normalization factors obtained from the background-only fit. Minor backgrounds are grouped together and denoted as 'Other'. This includes $t\bar{t}$-fake, single top, and other top (di-tau channel) or $t\bar{t}$-fake, $t\bar{t}+H$, multiboson, and other top (single-tau channel). The overlaid dotted lines show the additional contributions for signal scenarios close to the expected exclusion contour with the particle type and the mass and $\beta$ parameters for the simplified models indicated in the legend. For the leptoquark signal model the shapes of the distributions for $\text{LQ}_{3}^{\text{d}}$ and $\text{LQ}_{3}^{\text{v}}$ (not shown) are similar to that of $\text{LQ}_{3}^{\text{u}}$. The rightmost bin includes the overflow.

Observed event yields in data ('Observed') and expected event yields for SM background processes obtained from the background-only fit ('Total bkg.' and rows below) in the signal regions of the di-tau and single-tau channels. The quoted uncertainties include both the statistical and systematic uncertainties and are truncated at zero yield. By construction, no $t\bar{t}$ (2 real $\tau$) events can pass the selections in the single-tau channel. As the individual uncertainties are correlated, they do not add in quadrature to equal the total background uncertainty.

From left to right: upper limits at the 95% confidence level (CL) on the visible cross section ($\sigma_\text{vis}$) and on the number of signal events ($S_{\text{obs}}^{95}$). The third column ($S_{\text{exp}}^{95}$) shows the upper limit at the 95% CL on the number of signal events, given the expected number (and $\pm 1\,\sigma$ excursions on the expectation) of background events. The last two columns indicate the confidence level observed for the background-only hypothesis ($\text{CL}_{b}$), the discovery $p$-value ($p(s=0)$) and the significance ($Z$). In the di-tau SR, where fewer events are observed than predicted by the fitted background estimate, the $p$-value is capped at 0.5.

Expected and observed exclusion contours at the 95% confidence level for the vector third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{v}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ into a quark and a charged lepton. The plot shows the exclusion contour for the minimal-coupling scenario. The limits are derived from the binned single-tau signal region.

Expected and observed exclusion contours at the 95% confidence level for the vector third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{v}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ into a quark and a charged lepton. The plot shows the exclusion contour for the minimal-coupling scenario. The limits are derived from the binned single-tau signal region.

Expected and observed exclusion contours at the 95% confidence level for the vector third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{v}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ into a quark and a charged lepton. The plot shows the exclusion contour for vector leptoquarks with additional gauge couplings. The limits are derived from the binned single-tau signal region.

Expected and observed exclusion contours at the 95% confidence level for the vector third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{v}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ into a quark and a charged lepton. The plot shows the exclusion contour for vector leptoquarks with additional gauge couplings. The limits are derived from the binned single-tau signal region.

Exclusion contours at the 95% confidence level for the stop-stau signal model as a function of the masses of the top squark $m(\tilde{t}_{1})$ and of the tau slepton $m(\tilde{\tau}_{1})$. Expected and observed limits are shown for the present search in comparison to observed limits from previous ATLAS analyses based on data from Run-1 of the LHC at $\sqrt{s} = 8$ TeV [Eur. Phys. J. C 76 (2016)] and on a partial dataset from Run 2 at $\sqrt{s} = 13$ TeV [Phys. Rev. D 98 (2018) 032008]. The green band indicates the limit on the mass of the tau slepton (for a massless LSP) from the LEP experiments.

Exclusion contours at the 95% confidence level for the stop-stau signal model as a function of the masses of the top squark $m(\tilde{t}_{1})$ and of the tau slepton $m(\tilde{\tau}_{1})$. Expected and observed limits are shown for the present search in comparison to observed limits from previous ATLAS analyses based on data from Run-1 of the LHC at $\sqrt{s} = 8$ TeV [Eur. Phys. J. C 76 (2016)] and on a partial dataset from Run 2 at $\sqrt{s} = 13$ TeV [Phys. Rev. D 98 (2018) 032008]. The green band indicates the limit on the mass of the tau slepton (for a massless LSP) from the LEP experiments.

Expected and observed exclusion contours at the 95% confidence level for the scalar third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{u}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow q\ell)$ into a quark and a charged lepton. The plot shows the exclusion contour for up-type leptoquarks $\text{LQ}_{3}^{\text{u}})$ with charge $+2/3e$. The limits are derived from the binned single-tau signal region. Shown in gray for comparison are the observed exclusion-limit contours from the previous ATLAS publication that targets the same leptoquark models but is based on a subset of the Run-2 data [JHEP 06 (2019) 144]. In this previous publication five different analyses are considered that target not only the final state studied here but also the final states that correspond to a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow q\ell)$ of 0 or 1, leading to the concave shapes of the gray exclusion contours.

Expected and observed exclusion contours at the 95% confidence level for the scalar third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{u}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow q\ell)$ into a quark and a charged lepton. The plot shows the exclusion contour for up-type leptoquarks $\text{LQ}_{3}^{\text{u}})$ with charge $+2/3e$. The limits are derived from the binned single-tau signal region. Shown in gray for comparison are the observed exclusion-limit contours from the previous ATLAS publication that targets the same leptoquark models but is based on a subset of the Run-2 data [JHEP 06 (2019) 144]. In this previous publication five different analyses are considered that target not only the final state studied here but also the final states that correspond to a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow q\ell)$ of 0 or 1, leading to the concave shapes of the gray exclusion contours.

Expected and observed exclusion contours at the 95% confidence level for the scalar third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{d}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow q\ell)$ into a quark and a charged lepton. The plot shows the exclusion contour for down-type leptoquarks $\text{LQ}_{3}^{\text{d}})$ with charge $-1/3e$. The limits are derived from the binned single-tau signal region. Shown in gray for comparison are the observed exclusion-limit contours from the previous ATLAS publication that targets the same leptoquark models but is based on a subset of the Run-2 data [JHEP 06 (2019) 144]. In this previous publication five different analyses are considered that target not only the final state studied here but also the final states that correspond to a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow q\ell)$ of 0 or 1, leading to the concave shapes of the gray exclusion contours.

Expected and observed exclusion contours at the 95% confidence level for the scalar third-generation leptoquark signal model, as a function of the mass $m(\text{LQ}_{3}^{\text{d}})$ and the branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow q\ell)$ into a quark and a charged lepton. The plot shows the exclusion contour for down-type leptoquarks $\text{LQ}_{3}^{\text{d}})$ with charge $-1/3e$. The limits are derived from the binned single-tau signal region. Shown in gray for comparison are the observed exclusion-limit contours from the previous ATLAS publication that targets the same leptoquark models but is based on a subset of the Run-2 data [JHEP 06 (2019) 144]. In this previous publication five different analyses are considered that target not only the final state studied here but also the final states that correspond to a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow q\ell)$ of 0 or 1, leading to the concave shapes of the gray exclusion contours.

Upper limits on the signal cross section at the 95 % confidence level for the stop-stau signal model.

Upper limits on the signal cross section at the 95 % confidence level for the scalar third-generation leptoquark signal model with up-type leptoquarks.

Upper limits on the signal cross section at the 95 % confidence level for the scalar third-generation leptoquark signal model with down-type leptoquarks.

Upper limits on the signal cross section at the 95 % confidence level for the vector third-generation leptoquark signal model with minimal coupling (MC).

Upper limits on the signal cross section at the 95 % confidence level for the vector third-generation leptoquark signal model with additional gauge couplings (YM).

Acceptance of the one-bin signal region of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.

Efficiency of the one-bin signal region of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.

Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.

Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.

Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the signal region of the di-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$.

Efficiency of the signal region of the di-tau channel for pair production of up-type leptoquarks $\text{LQ}_{3}^{\text{u}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{u}} \rightarrow b\tau)$ of 0 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the one-bin signal region of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.

Efficiency of the one-bin signal region of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.

Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.

Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.

Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the signal region of the di-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$.

Efficiency of the signal region of the di-tau channel for pair production of down-type leptoquarks $\text{LQ}_{3}^{\text{d}}$. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{d}} \rightarrow t\tau)$ of 0 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the one-bin signal region of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.

Efficiency of the one-bin signal region of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.

Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.

Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.

Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the signal region of the di-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario.

Efficiency of the signal region of the di-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ in the minimal-coupling scenario. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the one-bin signal region of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.

Efficiency of the one-bin signal region of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.

Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.

Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.

Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 or 1 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the signal region of the di-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings.

Efficiency of the signal region of the di-tau channel for pair production of vector leptoquarks $\text{LQ}_{3}^{\text{v}}$ with additional gauge couplings. The plot does not show efficiencies for a branching fraction $B(\text{LQ}_{3}^{\text{v}} \rightarrow b\tau)$ of 0 because here the acceptance at generator level becomes zero and the efficiency is thus undefined.

Acceptance of the one-bin signal region of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Efficiency of the one-bin signal region of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Acceptance of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Efficiency of the first bin of the multi-bin signal region (50 GeV $< p_{\text{T}}(\tau) <$ 100 GeV) of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Acceptance of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Efficiency of the middle bin of the multi-bin signal region (100 GeV $< p_{\text{T}}(\tau) <$ 200 GeV) of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Acceptance of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Efficiency of the last bin of the multi-bin signal region (200 GeV $< p_{\text{T}}(\tau)$) of the single-tau channel for pair production of top squarks with decays via tau sleptons.

Acceptance of the signal region of the di-tau channel for pair production of top squarks with decays via tau sleptons.

Efficiency of the signal region of the di-tau channel for pair production of top squarks with decays via tau sleptons.

Cutflow for the benchmark signal model $m(\tilde{t}_{1}) = 1350$ GeV, $m(\tilde{\tau}_{1}) = 1090$ GeV for the di-tau SR. The simulated sample contains 30,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.

Cutflow for the benchmark signal model $m(\tilde{t}_{1}) = 1350$ GeV, $m(\tilde{\tau}_{1}) = 1090$ GeV for the single-tau one-bin SR. The simulated sample contains 30,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\tilde{t}_{1}) = 1350$ GeV, $m(\tilde{\tau}_{1}) = 1090$ GeV for the single-tau multi-bin SR. The simulated sample contains 30,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{u}}) = 1.2$ TeV, $\beta = 0.5$ for the di-tau SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{u}}) = 1.2$ TeV, $\beta = 0.5$ for the single-tau one-bin SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{u}}) = 1.2$ TeV, $\beta = 0.5$ for the single-tau multi-bin SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{d}}) = 1.2$ TeV, $\beta = 0.5$ for the di-tau SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{d}}) = 1.2$ TeV, $\beta = 0.5$ for the single-tau one-bin SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{d}}) = 1.2$ TeV, $\beta = 0.5$ for the single-tau multi-bin SR. The simulated sample contains 210,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the minimal-coupling scenario for the di-tau SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the minimal-coupling scenario for the single-tau one-bin SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the minimal-coupling scenario for the single-tau multi-bin SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the Yang--Mills scenario for the di-tau SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the di-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the Yang--Mills scenario for the single-tau one-bin SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

Cutflow for the benchmark signal model $m(\text{LQ}_{3}^{\text{v}}) = 1.4$ TeV, $\beta = 0.5$ in the Yang--Mills scenario for the single-tau multi-bin SR. The simulated sample contains 50,000 raw MC events. Weighted event yields are reported, normalized to an integrated luminosity of 139 fb$^{-1}$. 'Preselection' refers to the preselection for the single-tau channel.

The expected background and observed data with six jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with six jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with six jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with seven jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with seven jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with seven jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with eight jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with eight jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with eight jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with nine jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with nine jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with nine jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with ten jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with ten jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with ten jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with eleven jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with eleven jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with eleven jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with twelve-or-more jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with twelve-or-more jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with twelve-or-more jets in the different b-tag multiplicity bins for the 40 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with five jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with five jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with five jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with six jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with six jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with six jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with seven jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with seven jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with seven jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with eight jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with eight jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with eight jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with nine jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with nine jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with nine jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with ten-or-more jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with ten-or-more jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with ten-or-more jets in the different b-tag multiplicity bins for the 60 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with five jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with five jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with five jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with six jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with six jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with six jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with seven jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with seven jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with seven jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with eight jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with eight jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with eight jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with nine jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with nine jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with nine jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with ten-or-more jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with ten-or-more jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

The expected background and observed data with ten-or-more jets in the different b-tag multiplicity bins for the 80 GeV jet pT threshold. The background shown is estimated by including all bins in the fit.

Observed exclusion contours on the gluino and neutralino masses in a model where the gluino decays via a virtual top squark to two top quarks and the lightest neutralino, with the neutralino decaying to three light quarks (neutralino --> uds) via the RPV coupling lambda''_112.

Observed exclusion contours on the gluino and neutralino masses in a model where the gluino decays via a virtual top squark to two top quarks and the lightest neutralino, with the neutralino decaying to three light quarks (neutralino --> uds) via the RPV coupling lambda''_112.

Observed exclusion contours on the gluino and neutralino masses in a model where the gluino decays via a virtual top squark to two top quarks and the lightest neutralino, with the neutralino decaying to three light quarks (neutralino --> uds) via the RPV coupling lambda''_112.

Expected exclusion contours on the gluino and neutralino masses in a model where the gluino decays via a virtual top squark to two top quarks and the lightest neutralino, with the neutralino decaying to three light quarks (neutralino --> uds) via the RPV coupling lambda''_112.

Expected exclusion contours on the gluino and neutralino masses in a model where the gluino decays via a virtual top squark to two top quarks and the lightest neutralino, with the neutralino decaying to three light quarks (neutralino --> uds) via the RPV coupling lambda''_112.

Expected exclusion contours on the gluino and neutralino masses in a model where the gluino decays via a virtual top squark to two top quarks and the lightest neutralino, with the neutralino decaying to three light quarks (neutralino --> uds) via the RPV coupling lambda''_112.

Observed exclusion contours on the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Observed exclusion contours on the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Observed exclusion contours on the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Expected exclusion contours on the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Expected exclusion contours on the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Expected exclusion contours on the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Observed exclusion contours on the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Observed exclusion contours on the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Observed exclusion contours on the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Expected exclusion contours on the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Expected exclusion contours on the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Expected exclusion contours on the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Observed exclusion contours on the stop and neutralino masses in a model where the stop decays to a third-generation quark and a higgsino, which decays via the RPV coupling lambda''_323.

Observed exclusion contours on the stop and neutralino masses in a model where the stop decays to a third-generation quark and a higgsino, which decays via the RPV coupling lambda''_323.

Observed exclusion contours on the stop and neutralino masses in a model where the stop decays to a third-generation quark and a higgsino, which decays via the RPV coupling lambda''_323.

Expected exclusion contours on the stop and neutralino masses in a model where the stop decays to a third-generation quark and a higgsino, which decays via the RPV coupling lambda''_323.

Expected exclusion contours on the stop and neutralino masses in a model where the stop decays to a third-generation quark and a higgsino, which decays via the RPV coupling lambda''_323.

Expected exclusion contours on the stop and neutralino masses in a model where the stop decays to a third-generation quark and a higgsino, which decays via the RPV coupling lambda''_323.

Observed exclusion contours on the stop and neutralino masses in a model where the stop decays to a top and a bino-like neutralino, which decays via the RPV coupling lambda''_323.

Observed exclusion contours on the stop and neutralino masses in a model where the stop decays to a top and a bino-like neutralino, which decays via the RPV coupling lambda''_323.

Observed exclusion contours on the stop and neutralino masses in a model where the stop decays to a top and a bino-like neutralino, which decays via the RPV coupling lambda''_323.

Expected exclusion contours on the stop and neutralino masses in a model where the stop decays to a top and a bino-like neutralino, which decays via the RPV coupling lambda''_323.

Expected exclusion contours on the stop and neutralino masses in a model where the stop decays to a top and a bino-like neutralino, which decays via the RPV coupling lambda''_323.

Expected exclusion contours on the stop and neutralino masses in a model where the stop decays to a top and a bino-like neutralino, which decays via the RPV coupling lambda''_323.

Observed upper limits on the model cross-section in units of pb as a function of the gluino and neutralino masses in a model where the gluino decays via a virtual top squark to two top quarks and the lightest neutralino, with the neutralino decaying to three light quarks (neutralino --> uds) via the RPV coupling lambda''_112.

Observed upper limits on the model cross-section in units of pb as a function of the gluino and neutralino masses in a model where the gluino decays via a virtual top squark to two top quarks and the lightest neutralino, with the neutralino decaying to three light quarks (neutralino --> uds) via the RPV coupling lambda''_112.

Observed upper limits on the model cross-section in units of pb as a function of the gluino and neutralino masses in a model where the gluino decays via a virtual top squark to two top quarks and the lightest neutralino, with the neutralino decaying to three light quarks (neutralino --> uds) via the RPV coupling lambda''_112.

Observed upper limits on the model cross-section in units of pb as a function of the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Observed upper limits on the model cross-section in units of pb as a function of the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Observed upper limits on the model cross-section in units of pb as a function of the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Observed upper limits on the model cross-section in units of pb as a function of the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Observed upper limits on the model cross-section in units of pb as a function of the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Observed upper limits on the model cross-section in units of pb as a function of the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Observed upper limits on the model cross-section in units of pb as a function of the stop and neutralino masses in a model where the stop decays to a third-generation quark and a higgsino, which decays via the RPV coupling lambda''_323.

Observed upper limits on the model cross-section in units of pb as a function of the stop and neutralino masses in a model where the stop decays to a third-generation quark and a higgsino, which decays via the RPV coupling lambda''_323.

Observed upper limits on the model cross-section in units of pb as a function of the stop and neutralino masses in a model where the stop decays to a third-generation quark and a higgsino, which decays via the RPV coupling lambda''_323.

Observed upper limits on the model cross-section in units of pb as a function of the stop and neutralino masses in a model where the stop decays to a top and a bino-like neutralino, which decays via the RPV coupling lambda''_323.

Observed upper limits on the model cross-section in units of pb as a function of the stop and neutralino masses in a model where the stop decays to a top and a bino-like neutralino, which decays via the RPV coupling lambda''_323.

Observed upper limits on the model cross-section in units of pb as a function of the stop and neutralino masses in a model where the stop decays to a top and a bino-like neutralino, which decays via the RPV coupling lambda''_323.

Acceptance as a function of the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Acceptance as a function of the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Acceptance as a function of the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Efficiency as a function of the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Efficiency as a function of the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Efficiency as a function of the gluino and stop masses in a model where the gluino decays to a top quark and a top squark, with the top squark decaying to an s-quark and a b-quark via a non-zero lambda''_323 RPV coupling.

Acceptance as a function of the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Acceptance as a function of the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Acceptance as a function of the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Efficiency as a function of the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Efficiency as a function of the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Efficiency as a function of the gluino and neutralino masses in a model with a gluino decaying to two light quarks (q=u,d,s,c) and the neutralino, which then decays to two light quarks and a charged lepton or a neutrino.

Cut flow for a model of gluino pair production where the gluino decays to two (u, d, s, c) quarks and the neutralino, which then decays to two (u, d, s, c) quarks and a lepton via a lambda' RPV coupling, where each RPV decay can produce any of the four first and second generation leptons (e, mu, nu_e, nu_mu) with equal probability (m_gluino = 1800 GeV, m_neutralino = 900 GeV). The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies pT > 25 GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed.

Cut flow for a model of gluino pair production where the gluino decays to two (u, d, s, c) quarks and the neutralino, which then decays to two (u, d, s, c) quarks and a lepton via a lambda' RPV coupling, where each RPV decay can produce any of the four first and second generation leptons (e, mu, nu_e, nu_mu) with equal probability (m_gluino = 1800 GeV, m_neutralino = 900 GeV). The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies pT > 25 GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed.

Cut flow for a model of gluino pair production where the gluino decays to two (u, d, s, c) quarks and the neutralino, which then decays to two (u, d, s, c) quarks and a lepton via a lambda' RPV coupling, where each RPV decay can produce any of the four first and second generation leptons (e, mu, nu_e, nu_mu) with equal probability (m_gluino = 1800 GeV, m_neutralino = 900 GeV). The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies pT > 25 GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed.

Cut flow for a model of gluino pair production where each gluino decays to a top quark and a top squark, with the top squark decaying to an s- and a b- quark via a non-zero lambda''_323 RPV coupling (m_gluino = 1600 GeV, m_stop = 1000 GeV). The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies pT > 25 GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed.

Cut flow for a model of gluino pair production where each gluino decays to a top quark and a top squark, with the top squark decaying to an s- and a b- quark via a non-zero lambda''_323 RPV coupling (m_gluino = 1600 GeV, m_stop = 1000 GeV). The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies pT > 25 GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed.

Cut flow for a model of gluino pair production where each gluino decays to a top quark and a top squark, with the top squark decaying to an s- and a b- quark via a non-zero lambda''_323 RPV coupling (m_gluino = 1600 GeV, m_stop = 1000 GeV). The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies pT > 25 GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed.

Cut flow for a model of gluino pair production where each gluino decays via an off-shell top squark to two top quarks and the lightest neutralino, with the neutralino decaying to three light quarks (neutralino -> uds) via the RPV coupling lambda''_112 (m_gluino = 2000 GeV, m_neutralino = 941 GeV). The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies pT > 25 GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed.

Cut flow for a model of gluino pair production where each gluino decays via an off-shell top squark to two top quarks and the lightest neutralino, with the neutralino decaying to three light quarks (neutralino -> uds) via the RPV coupling lambda''_112 (m_gluino = 2000 GeV, m_neutralino = 941 GeV). The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies pT > 25 GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed.

Cut flow for a model of gluino pair production where each gluino decays via an off-shell top squark to two top quarks and the lightest neutralino, with the neutralino decaying to three light quarks (neutralino -> uds) via the RPV coupling lambda''_112 (m_gluino = 2000 GeV, m_neutralino = 941 GeV). The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies pT > 25 GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed.

Cut flow for a model of right-handed top squark pair production with the top squark decaying to the lightest supersymmetric particle (LSP) which is considered to be purely higgsino. The higgsino-like LSP decays through the non-zero RPV coupling lambda''_323 (m_stop = 975 GeV, m_neutralino = 600 GeV). The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies pT > 25 GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed.

Cut flow for a model of right-handed top squark pair production with the top squark decaying to the lightest supersymmetric particle (LSP) which is considered to be purely higgsino. The higgsino-like LSP decays through the non-zero RPV coupling lambda''_323 (m_stop = 975 GeV, m_neutralino = 600 GeV). The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies pT > 25 GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed.

Cut flow for a model of right-handed top squark pair production with the top squark decaying to the lightest supersymmetric particle (LSP) which is considered to be purely higgsino. The higgsino-like LSP decays through the non-zero RPV coupling lambda''_323 (m_stop = 975 GeV, m_neutralino = 600 GeV). The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies pT > 25 GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed.