Exclusion limits on higgsino pair production divided by the theory cross-section.The results of the low-mass analysis are used below m(higgsino) = 300 GeV, while those of the high-mass analysis are used above. The figure shows the observed and expected 95% upper limits on the higgsino pair production cross-section as a function of m(higgsino).

Observed and expected 95% limits in the m(higgsino) vs BR(higgsino to higgs+gravitino) plane. The regions above the lines are excluded by the analyses.

The observed and expected 95% upper limits on the total pair production cross section for degenerate higgsinos as a function of m(higgsino) for the high-mass search. Only the high-mass analysis results are used in this figure.

The observed and expected 95% upper limits on the total pair production cross section for degenerate higgsinos as a function of m(higgsino) for the high-mass search, divided by the theory cross section. Only the high-mass analysis results are used in this figure.

The observed and expected 95% upper limits on the total pair production cross section for degenerate higgsinos as a function of m(higgsino) for the low-mass search. Only the low-mass analysis results are used in this figure.

The observed and expected 95% upper limits on the total pair production cross section for degenerate higgsinos as a function of m(higgsino) for the low-mass search, divided by the theory cross section. Only the low-mass analysis results are used in this figure.

Particle-level acceptance for the low-mass discovery signal regions low-SR-MET0-meff440 and low-SR-MET150-meff440, shown as a function of higgsino mass. The acceptance is defined as the fraction of signal events passing the particle-level event selection that emulates the detector-level selection. The acceptance calculation considers only those signal events where both higgsinos decay to Higgs bosons that subsequently both decay to b-quarks.

The experimental efficiency of the low-mass analysis, for the two discovery signal regions low-SR-MET0-meff440 and low-SR-MET150-meff440, as a function of higgsino mass. The experimental efficiency is defined as the number of events passing the detector-level event selection divided by the number of events passing the event selection for a perfect detector. The denominator is obtained by implementing particle-level event selection that emulate the detector-level selection. Such particle-level selection is not applied on the numerator.

Particle-level acceptance for the high-mass discovery signal regions SR-4b-meff1-A-disc and SR-3b-meff3-A, shown as a function of higgsino mass. The acceptance is defined as the fraction of signal events passing the particle-level event selection that emulates the detector-level selection. The acceptance calculation considers only those signal events where both higgsinos decay to Higgs bosons that subsequently both decay to b-quarks.

The experimental efficiency of the high-mass analysis, for the two discovery signal regions SR-4b-meff1-A-disc and SR-3b-meff3-A, as a function of higgsino mass. The experimental efficiency is defined as the number of events passing the detector-level event selection divided by the number of events passing the event selection for a perfect detector. The denominator is obtained by implementing particle-level event selection that emulate the detector-level selection. Such particle-level selection is not applied on the numerator.

Example cutflow for SR-3b-meff3-A.

Example cutflow for SR-4b-meff1-A-disc.

Cutflow for low-mass analysis for each signal mass point.

Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.

Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.

Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.

Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.

Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.

Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.

Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.

Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.

Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.

Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.

Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.

Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.

N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.

N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.

N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.

Distribution of $v_{3}$ from MBT events plotted as a function of the A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of $v_{3}$ from $p_{T}^{jet}>75$ GeV events plotted as a function of the A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of $v_{3}$ from $p_{T}^{jet}>100$ GeV events plotted as a function of the A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of $v_{2}$ from MBT events plotted as a function of the event centrality and A-particle $p_\mathrm{T}$ in (0.5-2 GeV).

Distribution of $v_{2}$ from $p_{T}^{jet}>75$ GeV events plotted as a function of the event centrality and A-particle $p_\mathrm{T}$ in (0.5-2 GeV).

Distribution of $v_{2}$ from $p_{T}^{jet}>100$ GeV events plotted as a function of the event centrality and A-particle $p_\mathrm{T}$ in (0.5-2 GeV).

Distribution of $v_{2}$ from MBT events plotted as a function of the event centrality and A-particle $p_\mathrm{T}$ in (2-9 GeV).

Distribution of $v_{2}$ from $p_{T}^{jet}>75$ GeV events plotted as a function of the event centrality and A-particle $p_\mathrm{T}$ in (2-9 GeV).

Distribution of $v_{2}$ from $p_{T}^{jet}>100$ GeV events plotted as a function of the event centrality and A-particle $p_\mathrm{T}$ in (2-9 GeV).

Distribution of $v_{2}$ from MBT events plotted as a function of the event centrality and A-particle $p_\mathrm{T}$ in (9-100 GeV).

Distribution of $v_{2}$ from $p_{T}^{jet}>75$ GeV events plotted as a function of the event centrality and A-particle $p_\mathrm{T}$ in (9-100 GeV).

Distribution of $v_{2}$ from $p_{T}^{jet}>100$ GeV events plotted as a function of the event centrality and A-particle $p_\mathrm{T}$ in (9-100 GeV).

Distribution of relative UE-UE pair fractions from MBT events plotted as a function of A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of relative HS-HS pair fractions from MBT events plotted as a function of A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of relative HS-UE pair fractions from MBT events plotted as a function of A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of relative UE-HS pair fractions from MBT events plotted as a function of A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of relative UE-UE pair fractions from $p_{T}^{jet}>75$ GeV events plotted as a function of A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of relative HS-HS pair fractions from $p_{T}^{jet}>75$ GeV events plotted as a function of A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of relative HS-UE pair fractions from $p_{T}^{jet}>75$ GeV events plotted as a function of A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of relative UE-HS pair fractions from $p_{T}^{jet}>75$ GeV events plotted as a function of A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of relative UE-UE pair fractions from $p_{T}^{jet}>100$ GeV events plotted as a function of A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of relative HS-HS pair fractions from $p_{T}^{jet}>100$ GeV events plotted as a function of A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of relative HS-UE pair fractions from $p_{T}^{jet}>100$ GeV events plotted as a function of A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of relative UE-HS pair fractions from $p_{T}^{jet}>100$ GeV events plotted as a function of A-particle $p_\mathrm{T}$ for 0-5% centrality.

Distribution of relative UE-UE pair fractions from MBT events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (0.5-2 GeV).

Distribution of relative HS-UE pair fractions from MBT events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (0.5-2 GeV).

Distribution of relative UE-UE pair fractions from $p_{T}^{jet}>75$ GeV events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (0.5-2 GeV).

Distribution of relative HS-UE pair fractions from $p_{T}^{jet}>75$ GeV events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (0.5-2 GeV).

Distribution of relative UE-UE pair fractions from $p_{T}^{jet}>100$ GeV events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (0.5-2 GeV).

Distribution of relative HS-UE pair fractions from $p_{T}^{jet}>100$ GeV events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (0.5-2 GeV).

Distribution of relative UE-UE pair fractions from MBT events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (2-9 GeV).

Distribution of relative HS-UE pair fractions from MBT events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (2-9 GeV).

Distribution of relative UE-UE pair fractions from $p_{T}^{jet}>75$ GeV events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (2-9 GeV).

Distribution of relative HS-UE pair fractions from $p_{T}^{jet}>75$ GeV events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (2-9 GeV).

Distribution of relative UE-UE pair fractions from $p_{T}^{jet}>100$ GeV events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (2-9 GeV).

Distribution of relative HS-UE pair fractions from $p_{T}^{jet}>100$ GeV events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (2-9 GeV).

Distribution of relative UE-UE pair fractions from MBT events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (9-100 GeV).

Distribution of relative HS-UE pair fractions from MBT events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (9-100 GeV).

Distribution of relative UE-UE pair fractions from $p_{T}^{jet}>75$ GeV events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (9-100 GeV).

Distribution of relative HS-UE pair fractions from $p_{T}^{jet}>75$ GeV events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (9-100 GeV).

Distribution of relative UE-UE pair fractions from $p_{T}^{jet}>100$ GeV events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (9-100 GeV).

Distribution of relative HS-UE pair fractions from $p_{T}^{jet}>100$ GeV events plotted as a function of centrality A-particle $p_\mathrm{T}$ in (9-100 GeV).

The minus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.

The plus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.

The minus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.

The plus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.

The observed exclusion contour at 95% CL as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$. Points that are within the contours are excluded.

The expected exclusion contour at 95% CL as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$. Points that are within the contours are excluded.

The minus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$

The plus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$

The plus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$

The minus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$

Model dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{0}_{1})$ signal grid. The column titled 'Leading Region' stores information on which of the fit regions (SRA-B, SRC or SRD) is the dominant based on the expected CLs values.

Expected model dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{0}_{1})$ signal grid. The column titled 'Leading Region' stores information on which of the fit regions (SRA-B, SRC or SRD) is the dominant based on the expected CLs values.

Model dependent upper limit on the cross section for the $LQ_{3}^{u}$ signal grid with $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau))=0$ %. Only the SRA-B fit region is considered in this interpretation.

Expected model dependent upper limit on the cross section for the $LQ_{3}^{u}$ signal grid with $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau))=0$ %. Only the SRA-B fit region is considered in this interpretation.

The distributions of $S$ in SRA-TW. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.

The distributions of $\it{m}^{\mathrm{R=1.2}}_{1}$ in SRB-TT. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.

The distributions of R$_{ISR}$ in SRC signal regions before R$_{ISR}$ cuts are applied. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.

The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD0. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.

The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD1. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.

The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD2. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.

Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-TT. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.

Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-TW. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.

Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-T0. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.

Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (700,400)\ \mathrm{GeV} $ in signal regions SRB-TT, SRB-TW and SRB-T0. The regions differ by the last cut applied. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 60000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.

Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (500,327)\ \mathrm{GeV} $ in regions SRC-1, SRC-2, SRC-3, SRC-4 and SRC-5. The regions differ by the last cut applied. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 150000 raw MC events with filter efficiency of 0.384 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.

Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD0. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.

Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD1. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.

Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD2. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.

Signal acceptance in SRA-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$

Signal efficiency in SRA-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.

Signal acceptance in SRA-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$

Signal efficiency in SRA-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.

Signal acceptance in SRA-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$

Signal efficiency in SRA-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.

Signal acceptance in SRB-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$

Signal efficiency in SRB-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.

Signal acceptance in SRB-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$

Signal efficiency in SRB-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.

Signal acceptance in SRB-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$

Signal efficiency in SRB-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.

Signal acceptance in SRC1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal efficiency in SRC1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal acceptance in SRC2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal efficiency in SRC2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal acceptance in SRC3 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal efficiency in SRC3 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal acceptance in SRC4 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal efficiency in SRC4 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ plane showed in the paper plot.

Signal acceptance in SRC5 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ plane showed in the paper plot.

Signal efficiency in SRC5 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal acceptance in SRD0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal efficiency in SRD0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal acceptance in SRD1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal efficiency in SRD1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal acceptance in SRD2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Signal efficiency in SRD2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.

Distributions of MaxMin alternative algorithm $m(h_{\mathrm{cand1}},h_{\mathrm{cand2}})_{\mathrm{avg}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.

Distributions of Leading jet $p_T$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.

Distributions of MaxMin algorithm $m_{hcand}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.

Signal efficiency in SRA_M_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal acceptance in SRC_28 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal acceptance in SRC_26 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal acceptance in SRC_24 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal acceptance in SRA_M_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal acceptance in SRB for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal acceptance in SRA_L_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal acceptance in SRC_incl for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal acceptance in SRA_L_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal acceptance in SRA_incl_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal acceptance in SRA_incl_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal efficiency in SRA_H_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal efficiency in SRA_L_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal efficiency in SRB for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal acceptance in SRC_22 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal efficiency in SRA_H_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal efficiency in SRC_24 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal efficiency in SRC_26 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal acceptance in SRA_H_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal efficiency in SRA_incl_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal efficiency in SRC_22 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal acceptance in SRA_M_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal efficiency in SRC_28 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal acceptance in SRA_H_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production

Signal efficiency in SRA_incl_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal efficiency in SRA_L_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal efficiency in SRA_M_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Signal efficiency in SRC_incl for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production

Observed 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.

Expected 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.

Observed 95% CLs exclusion limit for the $M(\widetilde{\chi}_{1}^{0})$=60GeV signal grid for the best combined signal regions.

Expected 95% CLs exclusion limit for the $M(\widetilde{\chi}_{1}^{0})$=60GeV signal grid for the best combined signal regions.

Model dependent upper limit on the best combined signal regions considered in the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid

Model dependet upper limits on the best combined signal regions considered in the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid

Result of background only fit applied to signal regions. Event yields from the signal regions compared with SM MC predictions for the 3 highest contributing backgrounds separately and combined minor backgrounds.

Expected background event yields and dominant systematic uncertainties on background estimates in the A-type (inclusive), B-type and C-type (inclusive) regions.

Background-only fit results for the A- and B-type regions performed using 139$fb^{-1}$ of data. The quoted uncertainties on the fitted SM background include both the statistical and systematic uncertainties.

Background-only fit results for the C-type region performed using 139$fb^{-1}$ of data. The quoted uncertainties on the fitted SM background include both the statistical and systematic uncertainties.

Observed 95% CL upper limits on the visible cross sections σvis, the observed (S95obs) and expected (S95exp) 95% CL upper limits on the number of signal events with ± 1 σ excursions of the expectation, the CL of the background-only hypothesis, CLB, the discovery p-value (p0), truncated at 0.5, and the associated significance.

Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRA selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (1100, 330, 200)$ GeV, considered.

Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRB selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (700, 680, 550)$ GeV, considered.

Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRC selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (1200, 1150, 60)$ GeV, considered.

Post-fit yields for data and prediction in each of the single-bin signal regions of the analysis.

Observed 95% confidence level limit for the two-step signal grid.

Observed 95% confidence level limit for the two-step signal grid with the signal cross section increased by one sigma.

Observed 95% confidence level limit for the two-step signal grid with the signal cross section decreased by one sigma.

Expected 95% confidence level limit for the two-step signal grid.

Expected 95% confidence level limit for the two-step signal grid plus one sigma from experimental systematics.

Expected 95% confidence level limit for the two-step signal grid minus one sigma from experimental systematics.

Observed 95% confidence level limit for the Gtt signal grid.

Observed 95% confidence level limit for the Gtt signal grid with the signal cross section increased by one sigma.

Observed 95% confidence level limit for the Gtt signal grid with the signal cross section decreased by one sigma.

Expected 95% confidence level limit for the Gtt signal grid.

Expected 95% confidence level limit for the Gtt signal grid plus one sigma from experimental systematics.

Expected 95% confidence level limit for the Gtt signal grid minus one sigma from experimental systematics.

Observed 95% confidence level limit for the RPV signal grid.

Observed 95% confidence level limit for the RPV signal grid with the signal cross section increased by one sigma.

Observed 95% confidence level limit for the RPV signal grid with the signal cross section decreased by one sigma.

Expected 95% confidence level limit for the RPV signal grid.

Expected 95% confidence level limit for the RPV signal grid plus one sigma from experimental systematics.

Expected 95% confidence level limit for the RPV signal grid minus one sigma from experimental systematics.

Observed 95% confidence level limit for the two-step signal grid.

Expected 95% confidence level limit for the two-step signal grid.

Observed 95% confidence level limit for the Gtt signal grid.

Expected 95% confidence level limit for the Gtt signal grid.

Observed 95% confidence level limit for the RPV signal grid.

Expected 95% confidence level limit for the RPV signal grid.

$\mathcal{S}(E_{\mathrm{T}}^{\mathrm{miss}})$ distribution in the signal region SR-10ij50-0ib-MJ340. Two benchmark signal models are shown along with the background yields. These models, each representing a single mass point, are labelled 'RPV' with $(m_{\tilde{g}}, m_{\tilde{t}}) = (1600, 600) \, \mathrm{GeV}$ and 'two-step' with $(m_{\tilde{g}}, m_{\tilde{\chi^{0}_{1}}}) = (1600, 100) \, \mathrm{GeV}$.

$\mathcal{S}(E_{\mathrm{T}}^{\mathrm{miss}})$ distribution in the signal region SR-12ij50-2ib. Two benchmark signal models are shown along with the background yields. These models, each representing a single mass point, are labelled 'RPV' with $(m_{\tilde{g}}, m_{\tilde{t}}) = (1600, 600) \, \mathrm{GeV}$ and 'two-step' with $(m_{\tilde{g}}, m_{\tilde{\chi^{0}_{1}}}) = (1600, 100) \, \mathrm{GeV}$.

$\mathcal{S}(E_{\mathrm{T}}^{\mathrm{miss}})$ distribution in the signal region SR-9ij80-0ib. Two benchmark signal models are shown along with the background yields. These models, each representing a single mass point, are labelled 'RPV' with $(m_{\tilde{g}}, m_{\tilde{t}}) = (1600, 600) \, \mathrm{GeV}$ and 'two-step' with $(m_{\tilde{g}}, m_{\tilde{\chi^{0}_{1}}}) = (1600, 100) \, \mathrm{GeV}$.

Number of signal events expected for $139 \, \mathrm{fb}^{-1} $ after different analysis selections in the signal region SR-8ij50-0ib-MJ500. This 'two-step' model requires that a strongly produced gluino decays into quarks, the W and Z bosons, and the lightest stable neutralino where $(m_{\tilde{g}}, m_{\tilde{\chi^{0}_{1}}}) = (1600, 100) \, \mathrm{GeV}$.

Number of signal events expected for $139 \, \mathrm{fb}^{-1} $ after different analysis selections in the signal region SR-9ij50-0ib-MJ340. This 'two-step' model requires that a strongly produced gluino decays into quarks, the W and Z bosons, and the lightest stable neutralino where $(m_{\tilde{g}}, m_{\tilde{\chi^{0}_{1}}}) = (1600, 100) \, \mathrm{GeV}$.

Number of signal events expected for $139 \, \mathrm{fb}^{-1} $ after different analysis selections in the signal region SR-10ij50-0ib-MJ340. This 'two-step' model requires that a strongly produced gluino decays into quarks, the W and Z bosons, and the lightest stable neutralino where $(m_{\tilde{g}}, m_{\tilde{\chi^{0}_{1}}}) = (1600, 100) \, \mathrm{GeV}$.

Number of signal events expected for $139 \, \mathrm{fb}^{-1} $ after different analysis selections in the signal region SR-10ij50-0ib-MJ500. This 'two-step' model requires that a strongly produced gluino decays into quarks, the W and Z bosons, and the lightest stable neutralino where $(m_{\tilde{g}}, m_{\tilde{\chi^{0}_{1}}}) = (1600, 100) \, \mathrm{GeV}$.

Number of signal events expected for $139 \, \mathrm{fb}^{-1} $ after different analysis selections in the signal region SR-10ij50-1ib-MJ500. This 'two-step' model requires that a strongly produced gluino decays into quarks, the W and Z bosons, and the lightest stable neutralino where $(m_{\tilde{g}}, m_{\tilde{\chi^{0}_{1}}}) = (1600, 100) \, \mathrm{GeV}$.

Number of signal events expected for $139 \, \mathrm{fb}^{-1} $ after different analysis selections in the signal region SR-11ij50-0ib. This 'two-step' model requires that a strongly produced gluino decays into quarks, the W and Z bosons, and the lightest stable neutralino where $(m_{\tilde{g}}, m_{\tilde{\chi^{0}_{1}}}) = (1600, 100) \, \mathrm{GeV}$.

Number of signal events expected for $139 \, \mathrm{fb}^{-1} $ after different analysis selections in the signal region SR-12ij50-2ib. This 'two-step' model requires that a strongly produced gluino decays into quarks, the W and Z bosons, and the lightest stable neutralino where $(m_{\tilde{g}}, m_{\tilde{\chi^{0}_{1}}}) = (1600, 100) \, \mathrm{GeV}$.

Number of signal events expected for $139 \, \mathrm{fb}^{-1} $ after different analysis selections in the signal region SR-9ij80-0ib. This 'two-step' model requires that a strongly produced gluino decays into quarks, the W and Z bosons, and the lightest stable neutralino where $(m_{\tilde{g}}, m_{\tilde{\chi^{0}_{1}}}) = (1600, 100) \, \mathrm{GeV}$.

Acceptance for the signal region SR-8ij50-0ib-MJ500 showing the acceptance for the complete two-step signal grid.

Efficiency for the signal region SR-8ij50-0ib-MJ500 showing the efficiency for the complete two-step signal grid.

Acceptance for the signal region SR-9ij50-0ib-MJ340 showing the acceptance for the complete two-step signal grid.

Efficiency for the signal region SR-9ij50-0ib-MJ340 showing the efficiency for the complete two-step signal grid.

Acceptance for the signal region SR-10ij50-0ib-MJ340 showing the acceptance for the complete two-step signal grid.

Efficiency for the signal region SR-10ij50-0ib-MJ340 showing the efficiency for the complete two-step signal grid.

Acceptance for the signal region SR-10ij50-0ib-MJ500 showing the acceptance for the complete two-step signal grid.

Efficiency for the signal region SR-10ij50-0ib-MJ500 showing the efficiency for the complete two-step signal grid.

Acceptance for the signal region SR-10ij50-1ib-MJ500 showing the acceptance for the complete two-step signal grid.

Efficiency for the signal region SR-10ij50-1ib-MJ500 showing the efficiency for the complete two-step signal grid.

Acceptance for the signal region SR-11ij50-0ib showing the acceptance for the complete two-step signal grid.

Efficiency for the signal region SR-11ij50-0ib showing the efficiency for the complete two-step signal grid.

Acceptance for the signal region SR-12ij50-2ib showing the acceptance for the complete two-step signal grid.

Efficiency for the signal region SR-12ij50-2ib showing the efficiency for the complete two-step signal grid.

Acceptance for the signal region SR-9ij80-0ib showing the acceptance for the complete two-step signal grid.

Efficiency for the signal region SR-9ij80-0ib showing the efficiency for the complete two-step signal grid.

The normalisation factors for the dominant backgrounds of the analysis in each of the multi-bin and single-bin regions.

Post-fit yields for data and prediction in each of the single-bin validation regions to test the $N_{\mathrm{jet}}$ extraction.

Post-fit yields for data and prediction in each of the single-bin validation regions to test the $\mathcal{S}(E_{\mathrm{T}}^{\mathrm{miss}})$ extrapolation.

Post-fit yields for data and prediction in each of the multi-bin validation regions to test the $N_{\mathrm{jet}}$ extraction.

Post-fit yields for data and prediction in each of the multi-bin validation regions to test the $\mathcal{S}(E_{\mathrm{T}}^{\mathrm{miss}})$ extrapolation.

The observed Cls from the best expected signal regions for the two-step decay.

The observed Cls from the best expected signal regions for the Gtt decay.

The observed Cls from the best expected signal regions for the RPV decay.

Number of events in each signal region broken down by background type and the number of observed data events.

From left to right; the $95\%$ CL upper limits on the visible cross section (${\langle \epsilon\sigma \rangle}^{95}_{obs}$) and on the number of signal events. Next is the $95\%$ CL upper limit on the number of signal events, given the expected number of background events. The last two columns show the confidence level for the background only hypothesis ($CL_{b}$) and the dicovery $p$-value along with the Gaussian significance (Z).

Visualisation of the highest jet multiplicity event selected in signal regions targeting long cascade decays of pair-produced gluinos. This event was recorded by ATLAS on 23 October 2016, and contains 16 jets, illustrated by cones. Yellow blocks represent the calorimeter energy measured in noise-suppressed clusters. Of the reconstructed jets, 13 (11) have transverse momenta above 50 GeV (80 GeV), with 3 (2) being b-tagged. The leading jet has a transverse momentum of 507 GeV, and the sum of jet transverse momenta $H_T=2.9$ TeV. A value of 343 GeV is observed for the $E_{T}^{miss}$, whose direction is shown by the dashed red line, producing a significance $S(E_{T}^{miss})=6.4$. The sum of the masses of large-radius jets is evaluated as $M_{J}^{\Sigma}=1070$ GeV.

Visualisation of the highest jet multiplicity event selected in a control region used to make predictions of the background from multijet production. This event was recorded by ATLAS on 18 July 2018, and contains 19 jets, illustrated by cones. Yellow blocks represent the calorimeter energy measured in in noise-suppressed clusters. Of the reconstructed jets, 16 (10) have transverse momenta above 50 GeV (80 GeV). No jets were b-tagged. The leading et has a transverse momentum of 371 GeV, and the sum of jet transverse momenta $H_T=2.2$ TeV. A value of 8 GeV is observed for the $E_{T}^{miss}$, whose direction is shown by the dashed red line, producing a significance $S(E_{T}^{miss})=0.2$. The sum of the masses of large-radius jets is evaluated as $M_{J}^{\Sigma}=767$ GeV.

The nuclear modification factor R_pPb for prompt, isolated photons with rapidity in (1.09,1.90).

The nuclear modification factor R_pPb for prompt, isolated photons with rapidity in (−1.84,0.91).

The nuclear modification factor R_pPb for prompt, isolated photons with rapidity in (−2.83,−2.02).

The ratio of R_{pPb} from rapidity (1.09,1.90) to that of rapidity (−2.83,−2.02).

Three-body selection. Distributions of $M_{\Delta}^R$ in (a,b) $SR_{W}^{3-body}$ and (c,d) $SR_{T}^{3-body}$ for (left) same-flavour and (right) different-flavour events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference top squark pair production signal models are overlayed for comparison. Red arrows in the upper panels indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction; red arrows show data outside the vertical-axis range.

Three-body selection. Distributions of $M_{\Delta}^R$ in (a,b) $SR_{W}^{3-body}$ and (c,d) $SR_{T}^{3-body}$ for (left) same-flavour and (right) different-flavour events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference top squark pair production signal models are overlayed for comparison. Red arrows in the upper panels indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction; red arrows show data outside the vertical-axis range.

Three-body selection. Distributions of $M_{\Delta}^R$ in (a,b) $SR_{W}^{3-body}$ and (c,d) $SR_{T}^{3-body}$ for (left) same-flavour and (right) different-flavour events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference top squark pair production signal models are overlayed for comparison. Red arrows in the upper panels indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction; red arrows show data outside the vertical-axis range.

Four-body selection. (a) distributions of $E_{T}^{miss}$ in $SR^{4-body}_{Small\,\Delta m}$ and (b) distribution of $R_{2\ell 4j}$ in $SR^{4-body}_{Large\,\Delta m}$ for events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference top squark pair production signal models are overlayed for comparison. Red arrows in the upper panel indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction; red arrows show data outside the vertical-axis range.

Four-body selection. (a) distributions of $E_{T}^{miss}$ in $SR^{4-body}_{Small\,\Delta m}$ and (b) distribution of $R_{2\ell 4j}$ in $SR^{4-body}_{Large\,\Delta m}$ for events satisfying the selection criteria of the given SR, except the one for the presented variable, after the background fit. The contributions from all SM backgrounds are shown as a histogram stack. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. The hatched bands represent the total statistical and systematic uncertainty. The rightmost bin of each plot includes overflow events. Reference top squark pair production signal models are overlayed for comparison. Red arrows in the upper panel indicate the signal region selection criteria. The bottom panels show the ratio of the observed data to the total SM background prediction, with hatched bands representing the total uncertainty in the background prediction; red arrows show data outside the vertical-axis range.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the Observed limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100\% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100\% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100\% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100\% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100\% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}_1^0$ with 100\% branching ratio, in the (a) $m(\tilde{t}_1)$--$m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{t}_1)$--$\Delta m(\tilde{t}_1,\tilde{\chi}_1^0)$ planes. The dashed lines and the shaded bands are the expected limits and their $\pm1\sigma$ uncertainties. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty.

Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the mediator mass for a DM particle mass of $m(\chi)=1$ GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.

Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the mediator mass for a DM particle mass of $m(\chi)=1$ GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.

Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the mediator mass for a DM particle mass of $m(\chi)=1$ GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.

Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the mediator mass for a DM particle mass of $m(\chi)=1$ GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.

Two-body selection. Background fit results for $\mathrm{CR}^{\mathrm{2-body}}_{t\bar{t}}$, $\mathrm{CR}^{\mathrm{2-body}}_{t\bar{t}Z}$, $\mathrm{VR}^{\mathrm{2-body}}_{t\bar{t}, DF}$, $\mathrm{VR}^{\mathrm{2-body}}_{t\bar{t}, SF}$ and $\mathrm{VR}^{\mathrm{2-body}}_{t\bar{t} Z}$. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. Combined statistical and systematic uncertainties are given. Entries marked `--' indicate a negligible background contribution (less than 0.001 events). The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.

Three-body selection. Background fit results for $\mathrm{CR}^{\mathrm{3-body}}_{t\bar{t}}$, $\mathrm{CR}^{\mathrm{3-body}}_{VV}$, $\mathrm{CR}^{\mathrm{2-body}}_{t\bar{t}Z}$, $\mathrm{VR}^{\mathrm{3-body}}_{VV}$, $\mathrm{VR(1)}^{\mathrm{3-body}}_{t\bar{t}}$ and $\mathrm{VR(2)}^{\mathrm{3-body}}_{t\bar{t}}$. ''Others'' includes contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$ processes. Combined statistical and systematic uncertainties are given. Entries marked `--' indicate a negligible background contribution (less than 0.001 events). The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.

Four-body selection. Background fit results for $\mathrm{CR}^{\mathrm{4-body}}_{t\bar{t}}$,$\mathrm{CR}^{\mathrm{4-body}}_{VV}$, $\mathrm{VR}^{\mathrm{4-body}}_{t\bar{t}}$, $VR^{4-body}_{VV}$ and $\mathrm{VR}^{\mathrm{4-body}}_{VV,lll}$. The ''Others'' category contains the contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$. Combined statistical and systematic uncertainties are given. Entries marked `--' indicate a negligible background contribution (less than 0.001 events). The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.

Two-body selection. Background fit results for the different-flavour leptons binned SRs. The ''Others'' category contains the contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$. Combined statistical and systematic uncertainties are given. Entries marked `--' indicate a negligible background contribution (less than 0.001 events). The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.

Two-body selection. Background fit results for the same-flavour leptons binned SRs. The ''Others'' category contains the contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$. Combined statistical and systematic uncertainties are given. The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.

Three-body selection. Observed event yields and background fit results for the three-body selection SRs. The ''Others'' category contains contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$. Combined statistical and systematic uncertainties are given. Entries marked `--' indicate a negligible background contribution (less than 0.001 events). The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.

Four-body selection. Observed event yields and background fit results for SR$^{\mathrm{4-body}}_{\mathrm{Small}\,\Delta m}$ and SR$^{\mathrm{4-body}}_{\mathrm{Large}\,\Delta m}$. The ''Others'' category contains the contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$. Combined statistical and systematic uncertainties are given. The individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.

Exclusion limits contours (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}^0_1$ with 100% branching ratio in $\tilde{t}_1--\tilde{\chi}^0_1$ masses planes. The dashed lines and the shaded bands are the expected limit and its $\pm 1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The exclusion limits contours for the two-body, three-body and four-body selections are respectively shown in blue, green and red.

Exclusion limits contours (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}^0_1$ with 100% branching ratio in $\tilde{t}_1--\tilde{\chi}^0_1$ masses planes. The dashed lines and the shaded bands are the expected limit and its $\pm 1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The exclusion limits contours for the two-body, three-body and four-body selections are respectively shown in blue, green and red.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow t \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b W \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b W \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b W \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm 1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b W \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty. The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty.The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.

Exclusion limit contour (95% CL) for a simplified model assuming $\tilde{t}_1$ pair production, decaying via $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}_1^0$ with 100% branching ratio, in $\tilde{t}_1$--$\tilde{\chi}_1^0$ masses plane. The dashed lines and the shaded bands are the expected limit and its $\pm1\sigma$ uncertainty.The thick solid lines are the observed limits for the central value of the signal cross-section. The expected and observed limits do not include the effect of the theoretical uncertainties in the signal cross-section. The dotted lines show the effect on the observed limit when varying the signal cross-section by $\pm1\sigma$ of the theoretical uncertainty. The observed (a) and expected (b) CLs values are respectively shown.

Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the DM particle mass for a mediator mass of 10 GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.

Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the DM particle mass for a mediator mass of 10 GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.

Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the DM particle mass for a mediator mass of 10 GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.

Exclusion limits for (a) $t\bar{t} + \phi $ scalar and (b) $t\bar{t} + a $ pseudoscalar models as a function of the DM particle mass for a mediator mass of 10 GeV. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross-section to the nominal cross-section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines shows the observed (expected) exclusion limits.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection efficiency (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Three-body selection efficiency (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Three-body selection efficiency (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Three-body selection efficiency (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Three-body selection efficiency (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Four-body selection Efficiency (a) SR$^{4-body}_{Small \Delta m}$ , (b) $SR^{4-body}_{Large \Delta m}$ for a simplified model assuming $\tilde{t}_1$ pair production.

Four-body selection Efficiency (a) SR$^{4-body}_{Small \Delta m}$ , (b) $SR^{4-body}_{Large \Delta\ m}$ for a simplified model assuming $\tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} +\phi$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ t \tilde{t} +\phi$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ t \tilde{t} +\phi$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ t \tilde{t} +\phi$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ t \tilde{t} +\phi$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $ t \tilde{t} +\phi$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + \phi$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection acceptance (a) SR-DF$^{2-body}_{[110,120)}$, (b) SR-DF1$^{2-body}_{[120,140)}$, (c) SR-DF2$^{2-body}_{[140,160)}$, (d) SR-DF3$^{2-body}_{[160,180)}$, (e) SR-DF4$^{2-body}_{[180,220)}$, (f) SR-DF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming t \tilde{t} + a$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection acceptance (a) SR-SF$^{2-body}_{[110,120)}$, (b) SR-SF1$^{2-body}_{[120,140)}$, (c) SR-SF2$^{2-body}_{[140,160)}$, (d) SR-SF3$^{2-body}_{[160,180)}$, (e) SR-SF4$^{2-body}_{[180,220)}$, (f) SR-SF5$^{2-body}_{[220,\infty)}$ for a simplified model assuming $t \tilde{t} + a$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Two-body selection acceptance (a) $SR^{2-body}_{[110,\infty)}$ , (b) $SR^{2-body}_{[120,\infty)}$ , (c) $SR^{2-body}_{[140,\infty)}$ , (d) $SR^{2-body}_{[160,\infty)}$ , (e) $SR^{2-body}_{[180,\infty)}$ , (f) $SR^{2-body}_{[200,\infty)}$ , (g) $SR^{2-body}_{[220,\infty)}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Three-body selection acceptance (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Three-body selection acceptance (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Three-body selection acceptance (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Three-body selection acceptance (a) SR-DF$^{3-body}_{t}$, (b) SR-SF$^{3-body}_{t}$, (c) SR-DF$^{3-body}_{W}$, (d) SR-SF$^{3-body}_{W}$ for a simplified model assuming $ \tilde{t}_1$ pair production.

Four-body selection acceptance (a) SR$^{4-body}_{Small \Delta m}$ , (b) $SR^{4-body}_{Large \Delta m}$ for a simplified model assuming $\tilde{t}_1$ pair production.

Four-body selection acceptance (a) SR$^{4-body}_{Small \Delta m}$ , (b) $SR^{4-body}_{Large \Delta m}$ for a simplified model assuming $\tilde{t}_1$ pair production.

Two-body selection The numbers indicate the observed upper limits on the signal strenght for (a) a simplified model assuming $\tilde{t}_1$ pair production, (b) for $t\tilde{t} + a $ pseudoscalar models, (c) for $t\tilde{t} + \phi $ scalar models. In Figure (a), the red line corresponds to the observed limit.

Two-body selection The numbers indicate the observed upper limits on the signal strenght for (a) a simplified model assuming $\tilde{t}_1$ pair production, (b) for $t\tilde{t} + a $ pseudoscalar models, (c) for $t\tilde{t} + \phi $ scalar models. In Figure (a), the red line corresponds to the observed limit.

Two-body selection The numbers indicate the observed upper limits on the signal strenght for (a) a simplified model assuming $\tilde{t}_1$ pair production, (b) for $t\tilde{t} + a $ pseudoscalar models, (c) for $t\tilde{t} + \phi $ scalar models. In Figure (a), the red line corresponds to the observed limit.

Three-body selection The numbers indicate the upper limits on the signal strenght for a simplified model assuming $\tilde{t}_1$ pair production. For comparison, the red line corresponds to the observed limit.

Four-body selection The numbers indicate the upper limits on the signal strenght for a simplified model assuming $\tilde{t}_1$ pair production. For comparison, the red line corresponds to the observed limit.

Two-body selection The numbers indicate the upper limits on the signal cross-section for (a) a simplified model assuming $\tilde{t}_1$ pair production, (b) for $t\tilde{t} + a $ pseudoscalar models, (c) for $t\tilde{t} + \phi $ scalar models. In Figure (a), the red line corresponds to the observed limit.

Two-body selection The numbers indicate the upper limits on the signal cross-section for (a) a simplified model assuming $\tilde{t}_1$ pair production, (b) for $t\tilde{t} + a $ pseudoscalar models, (c) for $t\tilde{t} + \phi $ scalar models. In Figure (a), the red line corresponds to the observed limit.

Two-body selection The numbers indicate the upper limits on the signal cross-section for (a) a simplified model assuming $\tilde{t}_1$ pair production, (b) for $t\tilde{t} + a $ pseudoscalar models, (c) for $t\tilde{t} + \phi $ scalar models. In Figure (a), the red line corresponds to the observed limit.

Three-body selection The numbers indicate the upper limits on the signal cross-section for a simplified model assuming $\tilde{t}_1$ pair production. For comparison, the red line corresponds to the observed limit.

Four-body selection The numbers indicate the upper limits on the signal cross-section for a simplified model assuming $\tilde{t}_1$ pair production. For comparison, the red line corresponds to the observed limit.

Two-body selection. Background fit results for the $inclusive$ SRs. The Others category contains the contributions from $VVV$, $t\bar{t} t$, $t\bar{t}t\bar{t}$, $t\bar{t} W$, $t\bar{t} WW$, $t\bar{t} WZ$, $t\bar{t} H$, and $tZ$. Combined statistical and systematic uncertainties are given. Note that the individual uncertainties can be correlated, and do not necessarily add up quadratically to the total background uncertainty.

Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow t^{(*)}\tilde{\chi}^0_1$ with $m(\tilde{t}_1)=600~ GeV$ and $m(\tilde{\chi}^0_1)=400~ GeV$ in the SRs for the two-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.

Cut flow for the scalar signal model $t\bar{t} + \phi $ with $m(\phi)=150~ GeV$ and $m(\chi)=1~ GeV$ in the SRs for the two-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.

Cut flow for the pseudoscalar signal model $t\bar{t} + a $ with $m(a)=150~ GeV$ and $m(\chi)=1~ GeV$ in the SRs for the two-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.

Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow bW\tilde{\chi}^0_1$ with $m(\tilde{t}_1)=550~ GeV$ and $m(\tilde{\chi}^0_1)=385~ GeV$ in the SRs for the three-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.

Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow bW\tilde{\chi}^0_1$ with $m(\tilde{t}_1)=550~ GeV$ and $m(\tilde{\chi}^0_1)=400~ GeV$ in the SRs for the three-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.

Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow bW\tilde{\chi}^0_1$ with $m(\tilde{t}_1)=550~ GeV$ and $m(\tilde{\chi}^0_1)=430~ GeV$ in the SRs for the three-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.

Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow bW\tilde{\chi}^0_1$ with $m(\tilde{t}_1)=550~ GeV$ and $m(\tilde{\chi}^0_1)=460~ GeV$ in the SRs for the three-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.

Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}^0_1$ with $m(\tilde{t}_1)=400~ GeV$ and $m(\tilde{\chi}^0_1)=380~ GeV$ in the SRs for the four-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.

Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}^0_1$ with $m(\tilde{t}_1)=460~ GeV$ and $m(\tilde{\chi}^0_1)=415~ GeV$ in the SRs for the four-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.

Cut flow for the simplified signal model $\tilde{t}_1 \rightarrow b l \nu \tilde{\chi}^0_1$ with $m(\tilde{t}_1)=400~ GeV$ and $m(\tilde{\chi}^0_1)=320~ GeV$ in the SRs for the four-body selection. The number of events is normalized to the cross-section and to an integrated luminosity of $139~fb^{-1}$.

Distributions of $m_{T2}$ in VR-top-low for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.

Distributions of $m_{T2}$ in VR-top-high for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.

Distributions of $E_T^{miss}$ in VR-WW-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.

Distributions of $E_T^{miss}$ in VR-WW-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.

Distributions of $E_T^{miss}$ significance in VR-VZ for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.

Distributions of $E_T^{miss}$ significance in VR-top-WW for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.

Breakdown of the dominant systematic uncertainties on background estimates in the inclusive SRs requiring $m_{T2}$>100 GeV after performing the profile likelihood fit. Note that the individual uncertainties can be correlated, and do not necessarily add up quadratically to the total background uncertainty. The percentages show the size of the uncertainty relative to the total expected background. "Top theoretical uncertainties" refers to $t\bar t$ theoretical uncertainties and the uncertainty associated to $Wt-t\bar t$ interference added quadratically.

Observed events and predicted post-fit background yields for the DF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed events and predicted post-fit background yields for the DF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed events and predicted post-fit background yields for the SF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed events and predicted post-fit background yields for the SF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Distributions of $m_{T2}$ in SRSF-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.

Distributions of $m_{T2}$ in SRSF-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.

Distributions of $m_{T2}$ in SRDF-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.

Distributions of $m_{T2}$ in SRDF-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.

Observed exclusion limits on SUSY simplified models for chargino-pair production with $W$ boson mediated decays. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for chargino-pair production with $W$ boson mediated decays. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for chargino-pair production with slepton/sneutrino mediated mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for chargino-pair production with slepton/sneutrino mediated mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for slepton-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for slepton-pair production. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for selectron-pair production, with left and right handed selectron production combined. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for selectron-pair production, with left and right handed selectron production combined. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for left-handed selectron-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for left-handed selectron-pair production. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for right-handed selectron-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for right-handed selectron-pair production. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for smuon-pair production, with left and right handed smuon production combined. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for smuon-pair production, with left and right handed smuon production combined. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for left-handed smuon-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for left-handed smuon-pair production. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for right-handed smuon-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for right-handed smuon-pair production. All limits are computed at 95% CL.

Observed events and predicted background yields from the fit in the binned DF SRs with $n_{non-b-tagged jets}=0$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed events and predicted background yields from the fit in the binned DF SRs with $n_{non-b-tagged jets}=1$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed events and predicted background yields from the fit in the binned SF SRs with $n_{non-b-tagged jets}=0$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed events and predicted background yields from the fit in the binned SF SRs with $n_{non-b-tagged jets}=1$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed exclusion limits on SUSY simplified models for left-handed slepton-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for left-handed slepton-pair production. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for right-handed slepton-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for right-handed slepton-pair production. All limits are computed at 95% CL.

Upper limits on signal cross-section (fb) for chargino-pair production with W -boson-mediated decays.

Upper limits on signal cross-section (fb) for chargino-pair production with slepton/sneutrino-mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed.

Upper limits on signal cross-section (fb) for slepton-pair production.

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,105).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,105).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,105).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,105).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,105).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,105).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,105).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,105).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[105,110).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[105,110).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[105,110).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[105,110).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[105,110).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[105,110).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[105,110).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[105,110).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[110,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[110,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[110,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[110,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[110,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[110,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[110,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[110,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,140).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,140).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,140).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,140).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,140).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,140).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,140).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,140).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[140,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[140,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[140,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[140,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[140,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[140,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[140,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[140,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,180).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,180).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,180).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,180).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,180).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,180).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,180).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,180).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[180,220).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[180,220).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[180,220).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[180,220).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[180,220).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[180,220).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[180,220).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[180,220).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[220,260).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[220,260).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[220,260).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[220,260).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[220,260).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[220,260).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[220,260).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[220,260).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[260,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[260,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[260,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[260,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[260,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[260,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[260,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[260,inf).

Cutflow for supersymmetric model where $\tilde{\chi}_1^{\pm}\tilde{\chi}_1^{\mp}$ decay via $W^{\pm}W^{\mp}$. The masses of the two charginos are 300 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 50 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.

Cutflow for supersymmetric model where $\tilde{\chi}_1^{\pm}\tilde{\chi}_1^{\mp}$ decay via slepton-neutrino/sneutrino-lepton pair. The masses of the two charginos are 600 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 1 GeV. The slepton/sneutrino masses are 300 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.

Cutflow for supersymmetric model where $\tilde\ell\tilde\ell$ are produced. Only $\tilde{e}$ and $\tilde{\mu}$ are considered in this model. The masses of the two sleptons are 400 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 200 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.

The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.

The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.

The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.

The D(z) distributions in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 0.3.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 0.3.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 0.3.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 316.22 < pTjet < 398.10 and 0.0 < eta < 0.3.

The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.

The D(z) distributions in different centrality intervals in PbPb and in pp for 398.10 < pTjet < 501.18 and 0.0 < eta < 0.3.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 398.10 < pTjet < 501.18 and 0.0 < eta < 0.3.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 398.10 < pTjet < 501.18 and 0.0 < eta < 0.3.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 0.3.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 398.10 < pTjet < 501.18 and 0.0 < eta < 0.3.

The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.

The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.3 < eta < 0.8.

The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.

The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.8 < eta < 1.2.

The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 1.2 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.

The D(z) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 0.3.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 126.00 < pTjet < 158.49 and 0.0 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.

The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.3 < eta < 0.8.

The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.

The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.8 < eta < 1.2.

The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 1.2 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.

The D(z) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 0.3.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 158.49 < pTjet < 199.53 and 0.0 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.

The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.3 < eta < 0.8.

The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.

The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.8 < eta < 1.2.

The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 1.2 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.

The D(z) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 0.3.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 199.53 < pTjet < 251.19 and 0.0 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.

The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.3 < eta < 0.8.

The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.

The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.8 < eta < 1.2.

The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 1.2 < eta < 2.1.

Excess transverse momenta in jet in PbPb compared to pp collisions in different centrality selections for abs(jet rapidity) < 2.1.

The D(z) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.

Excess particles in jet in PbPb compared to pp collisions in different centrality selections for abs(jet rapidity) < 2.1.

The D(pT) distributions in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.

Ratio of R(D(z)) distributions in a given abs(jet rapidity) region to R(D(z)) for abs(jet rapidity) < 0.3 for 126 < pTJet < 158.5 GeV.

The ratio of the D(z) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.

Ratio of R(D(z)) distributions in a given abs(jet rapidity) region to R(D(z)) for abs(jet rapidity) < 0.3 for 158.5 < pTJet < 199.5 GeV.

The ratio of the D(pT) in different centrality intervals in PbPb and in pp for 251.19 < pTjet < 316.22 and 0.0 < eta < 2.1.

Ratio of R(D(z)) distributions in a given abs(jet rapidity) region to R(D(z)) for abs(jet rapidity) < 0.3 for 199.5 < pTJet < 251.8 GeV.

Excess transverse momenta in jet in PbPb compared to pp collisions in different centrality selections for abs(jet rapidity) < 2.1.

Excess particles in jet in PbPb compared to pp collisions in different centrality selections for abs(jet rapidity) < 2.1.

Ratio of R(D(z)) distributions in a given abs(jet rapidity) region to R(D(z)) for abs(jet rapidity) < 0.3 for 126 < pTJet < 158.5 GeV.

Ratio of R(D(z)) distributions in a given abs(jet rapidity) region to R(D(z)) for abs(jet rapidity) < 0.3 for 158.5 < pTJet < 199.5 GeV.

Ratio of R(D(z)) distributions in a given abs(jet rapidity) region to R(D(z)) for abs(jet rapidity) < 0.3 for 199.5 < pTJet < 251.8 GeV.