Event yields for the different processes estimated with the fit to the $O_\mathrm{NN}$ distribution compared to the numbers of observed events. Only the statistical uncertainties are quoted. The $Z,VV+\mathrm{jets}$ contributions and the multijet background are fixed in the fit; therefore no uncertainty is quoted for these processes.

Detailed list of the contribution from each source of uncertainty to the total uncertainty in the measured values of $\sigma_{\mathrm{fid}}(tq)$ and $\sigma_{\mathrm{fid}}(\bar tq)$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3\%$. Uncertainties contributing less than $0.5\%$ are marked with ‘<0.5’.

Significant contributions to the total relative uncertainty in the measured value of $R_{t}$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3~\%$. Uncertainties contributing less than $0.5~\%$ are not shown.

Slopes $a$ of the mass dependence of the measured cross$-$sections.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the neural network discriminant, $O_{\mathrm{NN}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the second neural network discriminant, $O_{\mathrm{NN2}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Migration matrix for $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $p_{\mathrm{T}}(t)$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(\hat{t\hspace{-0.2mm}})|$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(t)|$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Uncertainties in the normalisations of the different backgrounds for all processes, as derived from the total cross-section measurement.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events(at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-quark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.

Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-antiquark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.

Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the normalised differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the absolute differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$.

Uncertainties for the normalised differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

D(pt) distributions for pp and Pb+Pb collisions, jet rapidity 1.2 < |y| < 2.1.

D(z) distributions for pp and Pb+Pb collisions, jet rapidity |y| < 2.1.

D(z) distributions for pp and Pb+Pb collisions, jet rapidity |y| < 0.3.

D(z) distributions for pp and Pb+Pb collisions, jet rapidity 0.3 < |y| < 0.8.

D(z) distributions for pp and Pb+Pb collisions, jet rapidity 1.2 < |y| < 2.1.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

The difference between the total yield of particles with 1 < pt^trk < 4 GeV measured in 0-80 PCT Pb+Pb collisions and the total yield measured in the same pt interval measured in pp collisions in jets with |y| < 2.1, 100 < pt < 398 GeV.

The difference between the total yield of particles with 4 < pt^trk < 25 GeV measured in 0-80 PCT Pb+Pb collisions and the total yield measured in the same pt interval measured in pp collisions in jets with |y| < 2.1, 100 < pt < 398 GeV.

The difference between the total yield of particles with 25 < pt^trk < 100 GeV measured in 0-80 PCT Pb+Pb collisions and the total yield measured in the same pt interval measured in pp collisions in jets with |y| < 2.1, 100 < pt < 398 GeV.

The difference between the total transverse momentum of particles with 1 < pt^trk < 4 GeV measured in 0-80 PCT Pb+Pb collisions and the total transverse momentum of particles in the same pt interval measured in pp collisions in jets with |y| < 2.1, 100 < pt < 398 GeV.

The difference between the total transverse momentum of particles with 4 < pt^trk < 25 GeV measured in 0-80 PCT Pb+Pb collisions and the total transverse momentum of particles in the same pt interval measured in pp collisions in jets with |y| < 2.1, 100 < pt < 398 GeV.

The difference between the total transverse momentum of particles with 25 < pt^trk < 100 GeV measured in 0-80 PCT Pb+Pb collisions and the total transverse momentum of particles in the same pt interval measured in pp collisions in jets with |y| < 2.1, 100 < pt < 398 GeV.

The ratio of R_D(z) distributions in three rapidity selections for 0-10 PCT Pb+Pb collisions.

The ratio of R_D(z) distributions in three rapidity selections for 10-20 PCT Pb+Pb collisions.

The ratio of R_D(z) distributions in three rapidity selections for 20-30 PCT Pb+Pb collisions.

Measured cross sections for inclusive isolated-photon production as a function of $E_{\rm T}^{\gamma}$ for $1.81<|\eta^{\gamma}|<2.37$.

Predicted cross sections for inclusive isolated-photon production as a function of $E_{\rm T}^{\gamma}$ for $|\eta^{\gamma}|<0.6$.

Predicted cross sections for inclusive isolated-photon production as a function of $E_{\rm T}^{\gamma}$ for $0.6<|\eta^{\gamma}|<1.37$.

Predicted cross sections for inclusive isolated-photon production as a function of $E_{\rm T}^{\gamma}$ for $1.56<|\eta^{\gamma}|<1.81$.

Predicted cross sections for inclusive isolated-photon production as a function of $E_{\rm T}^{\gamma}$ for $1.81<|\eta^{\gamma}|<2.37$.

Mean values of charged-particle multiplicity $n_\mathrm{ch}$ as a function of leading charged-particle $p_\mathrm{T}$ in the trans-diff azimuthal region.

Mean values of charged-particle $\sum p_\mathrm{T}$ as a function of leading charged-particle $p_\mathrm{T}$ in the trans-min azimuthal region.

Mean values of charged-particle $\sum p_\mathrm{T}$ as a function of leading charged-particle $p_\mathrm{T}$ in the trans-max azimuthal region.

Mean values of charged-particle $\sum p_\mathrm{T}$ as a function of leading charged-particle $p_\mathrm{T}$ in the trans-diff azimuthal region.

Mean charged-particle average transverse momentum as a function of charged-particle multiplicity in transverse region for transverse azimuthal region.

Mean charged-particle average transverse momentum as a function of charged-particle multiplicity in transverse region for trans-min azimuthal region.

Mean charged-particle average transverse momentum as a function of charged-particle multiplicity in transverse region for trans-max azimuthal region.

Mean charged-particle average transverse momentum as a function of $p_\mathrm{T}^\mathrm{lead}$ for transverse azimuthal region.

Mean charged-particle average transverse momentum as a function of $p_\mathrm{T}^\mathrm{lead}$ for trans-min azimuthal region.

Mean charged-particle average transverse momentum as a function of $p_\mathrm{T}^\mathrm{lead}$ for trans-max azimuthal region.

Unit-normalised distribution of the transverse momentum of the leading charged-particle $p_\mathrm{T}^\mathrm{lead}\ \mathrm{[GeV]}$ > 5 GeV$.

Mean charged-particle multiplicity $n_\mathrm{ch}$ density as a function of $\Delta\phi_\mathrm{lead}$ for $p_\mathrm{T}^\mathrm{lead}$ > 1 GeV.

Mean charged-particle multiplicity $n_\mathrm{ch}$ density as a function of $\Delta\phi_\mathrm{lead}$ for $p_\mathrm{T}^\mathrm{lead}$ > 5 GeV.

Mean charged-particle multiplicity $n_\mathrm{ch}$ density as a function of $\Delta\phi_\mathrm{lead}$ for $p_\mathrm{T}^\mathrm{lead}$ > 10 GeV.

Mean charged-particle $\sum p_\mathrm{T}$ density as a function of $\Delta\phi_\mathrm{lead}$ for $p_\mathrm{T}^\mathrm{lead}$ >1 GeV.

Mean charged-particle $\sum p_\mathrm{T}$ density as a function of $\Delta\phi_\mathrm{lead}$ for $p_\mathrm{T}^\mathrm{lead}$ > 5 GeV.

Mean charged-particle $\sum p_\mathrm{T}$ density as a function of $\Delta\phi_\mathrm{lead}$ for $p_\mathrm{T}^\mathrm{lead}$ > 10 GeV.

Mean values of charged-particle multiplicity $n_\mathrm{ch}$ as a function of leading charged-particle $p_\mathrm{T}$ in the transverse azimuthal region.

Mean values of charged-particle multiplicity $n_\mathrm{ch}$ as a function of leading charged-particle $p_\mathrm{T}$ in the tovards azimuthal region.

Mean values of charged-particle multiplicity $n_\mathrm{ch}$ as a function of leading charged-particle $p_\mathrm{T}$ in the away azimuthal region.

Mean values of charged-particle multiplicity $\sum p_\mathrm{T}$ as a function of leading charged-particle $p_\mathrm{T}$ in the transverse azimuthal region.

Mean values of charged-particle multiplicity $\sum p_\mathrm{T}$ as a function of leading charged-particle $p_\mathrm{T}$ in the towards azimuthal region.

Mean values of charged-particle multiplicity $\sum p_\mathrm{T}$ as a function of leading charged-particle $p_\mathrm{T}$ in the away azimuthal region.

Mean charged-particle average transverse momentum as a function of charged-particle multiplicity in toward region for towards azimuthal region.

Mean charged-particle average transverse momentum as a function of charged-particle multiplicity in away region for away azimuthal region.

Mean charged-particle average transverse momentum as a function of $p_\mathrm{T}^\mathrm{lead}$ for toward azimuthal region.

Mean charged-particle average transverse momentum as a function of $p_\mathrm{T}^\mathrm{lead}$ for away azimuthal region.

Mean charged-particle average transverse momentum as a function of charged-particle multiplicity in trans-min region for trans-min azimuthal region.

Mean charged-particle average transverse momentum as a function of charged-particle multiplicity in trans-max region for trans-max azimuthal region.

Breakdown of systematic uncertainties in percent for the measured fiducial cross section times leptonic branching ratio for Z/gamma* production in the Z/gamma* -> mu+mu- final state at 13TeV.

Measured fiducial cross section times leptonic branching ratio for Z/gamma* production in the combined Z/gamma* -> l+l- (l = e, mu) final state.

Measured total cross section times leptonic branching ratio for Z/gamma* production in the combined Z/gamma* -> l+ l- (l = e, mu) final state.

Measured total cross-section for ttbar events using e-mu events with b-tagged jets.

Correlation coefficients amongst the combined (Z/gamma^* -> l+ l-) where (l = e, mu) fiducial cross section and ttbar total cross section at 13, 8, and 7TeV.

Correlation coefficients amongst the combined (Z/gamma^* -> l+ l-) where (l = e, mu) fiducial cross section and ttbar total cross section at 13, 8, and 7TeV, omitting the common normalisation uncertainty due to the luminosity calibration and beam energy.

Z-boson and ttbar production cross-section single ratios at 13, 8, 7TeV. The beam-energy uncertainty, which largely cancels in the ratios, is included in the systematic uncertainty. In the first column, the total (TOT) cross sections are used for both numerator and denominator. In the second column, the total cross section is used for the numerator while the fiducial (FID) cross section is used for the denominator. In the third column, the fiducial cross sections are used for both numerator and denominator. Apart for the MZ requirement, the kinematic fiducial requirements listed below apply only to the fiducial cross sections. The luminosity uncertainty almost entirely cancels in some of the ratio measurements.

Z-boson and ttbar production cross-section double ratios at 13, 8, 7TeV. The beam-energy uncertainty, which largely cancels in the ratios, is included in the systematic uncertainty. In the first column, the total (TOT) cross sections are used for both ttbar and Z processes. In the second column, the total cross section is used for ttbar while the fiducial (FID) cross section is used for Z. In the third column, the fiducial cross sections are used for both ttbar and Z. Apart for the MZ requirement, the kinematic fiducial requirements listed below apply only to the fiducial cross sections.

The cross-section in bins of the di-$J/\psi$ transverse momentum in the forward rapidity region, assuming unpolarised $J/\psi$ mesons and excluding the $J/\psi$ spin-alignment systematic uncertainty. The branching fraction and luminosity uncertainties are not included in the systematic uncertainty as they are constant at 1.1$\%$ and 1.9$\%$ respectively.

The cross-section in bins of the di-$J/\psi$ invariant mass in the central rapidity region, assuming unpolarised $J/\psi$ mesons and excluding the $J/\psi$ spin-alignment systematic uncertainty. The branching fraction and luminosity uncertainties are not included in the systematic uncertainty as they are constant at 1.1$\%$ and 1.9$\%$ respectively.

The cross-section in bins of the di-$J/\psi$ invariant mass in the forward rapidity region, assuming unpolarised $J/\psi$ mesons and excluding the $J/\psi$ spin-alignment systematic uncertainty. The branching fraction and luminosity uncertainties are not included in the systematic uncertainty as they are constant at 1.1$\%$ and 1.9$\%$ respectively.

The total cross-section, DPS cross-section, $f_{\mathrm{DPS}}$, and average acceptance correction in the muon fiducial volume for the $\Delta y$ distribution. The branching fraction and luminosity uncertainties are not included in the systematic uncertainty as they are constant at 1.1$\%$ and 1.9$\%$ respectively.

The total cross-section, DPS cross-section, $f_{\mathrm{DPS}}$, and average acceptance correction in the muon fiducial volume for the $\Delta \phi$ distribution. The branching fraction and luminosity uncertainties are not included in the systematic uncertainty as they are constant at 1.1$\%$ and 1.9$\%$ respectively.

The total cross-section, DPS cross-section, $f_{\mathrm{DPS}}$, and average acceptance correction in the muon fiducial volume for the $m$($J/\psi$ $J/\psi$) distribution. The branching fraction and luminosity uncertainties are not included in the systematic uncertainty as they are constant at 1.1$\%$ and 1.9$\%$ respectively.

The total cross-section, DPS cross-section, $f_{\mathrm{DPS}}$, and average acceptance correction in the muon fiducial volume for the $p_{\mathrm{T}}$($J/\psi$ $J/\psi$) distribution. The branching fraction and luminosity uncertainties are not included in the systematic uncertainty as they are constant at 1.1$\%$ and 1.9$\%$ respectively.

The average acceptance weight for each spin-alignment scenario relative to the unpolarised case in bins of the sub-leading $J/\psi$ transverse momentum in the central rapidity region.

The average acceptance weight for each spin-alignment scenario relative to the unpolarised case in bins of the sub-leading $J/\psi$ transverse momentum in the forward rapidity region.

The average acceptance weight for each spin-alignment scenario relative to the unpolarised case in bins of the di-$J/\psi$ transverse momentum in the central rapidity region.

The average acceptance weight for each spin-alignment scenario relative to the unpolarised case in bins of the di-$J/\psi$ transverse momentum in the forward rapidity region.

The average acceptance weight for each spin-alignment scenario relative to the unpolarised case in bins of the di-$J/\psi$ invariant in the central rapidity region.

The average acceptance weight for each spin-alignment scenario relative to the unpolarised case in bins of the di-$J/\psi$ invariant in the forward rapidity region.

Ratios of integrated fiducial CC and NC cross sections obtained from the combination of electron and muon channels with statistical (stat) and systematic (syst) uncertainties. The common fiducial regions are defined in Section 2.3.

Total cross sections times leptonic branching ratios obtained from the combination of electron and muon channels with statistical and systematic uncertainties, for $W^+$, $W^-$, their sum and the $Z/\gamma^*$ process measured at $\sqrt{s}=7$ TeV. The $Z/\gamma^*$ cross section is defined for the dilepton mass window $m_{\ell\ell} = 66 - 116$ GeV. The uncertainties denote the statistical (stat), the experimental systematic (syst), the luminosity (lumi), and acceptance extrapolation (acc) contributions.

Ratios of total CC and NC cross sections obtained from the combination of electron and muon channels with statistical and systematic uncertainties. The $Z/\gamma^*$ cross section is defined for the dilepton mass window $m_{\ell\ell} = 66 - 116$ GeV. The uncertainties denote the statistical (stat), the experimental systematic (syst), and acceptance extrapolation (acc) contributions.

The correlation coefficients of the $W^+$, $W^-$ and $Z$ fiducial cross-section measurements.

Measurement of the electron-to-muon cross-section ratios for the $W$ and $Z$ production, $R_W$ and $R_Z$. The uncertainties denote the statistical (stat) and the experimental systematic (syst) contributions.

Differential cross section for the $W^+ \to \ell^+\nu$ processes combined from $\ell = e, \mu$ decays extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the $W^- \to \ell^-\bar{\nu}$ processes combined from $\ell = e, \mu$ decays extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the central $Z/\gamma^* \to \ell\ell$ processes in the invariant mass region $46 < m_{\ell\ell} < 66$ GeV combined from $\ell = e, \mu$ decays extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the central $Z/\gamma^* \to \ell\ell$ processes in the invariant mass region $66 < m_{\ell\ell} < 116$ GeV combined from $\ell = e, \mu$ decays extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the central $Z/\gamma^* \to \ell\ell$ processes in the invariant mass region $116 < m_{\ell\ell} < 150$ GeV combined from $\ell = e, \mu$ decays extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the forward $Z/\gamma^* \to \ell\ell$ processes in the invariant mass region $66 < m_{\ell\ell} < 116$ GeV combined from $\ell = e, \mu$ decays extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the forward $Z/\gamma^* \to \ell\ell$ processes in the invariant mass region $116 < m_{\ell\ell} < 150$ GeV combined from $\ell = e, \mu$ decays extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the $W^- \to e^-\bar{\nu}$ process extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the $W^+ \to e^+\nu$ process extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the central $Z/\gamma^* \to ee$ process in the invariant mass region $46 < m_{\ell\ell} < 66$ GeV extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the central $Z/\gamma^* \to ee$ process in the invariant mass region $66 < m_{\ell\ell} < 116$ GeV extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the forward $Z/\gamma^* \to ee$ process in the invariant mass region $66 < m_{\ell\ell} < 116$ GeV extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the central $Z/\gamma^* \to ee$ process in the invariant mass region $116 < m_{\ell\ell} < 150$ GeV extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the forward $Z/\gamma^* \to ee$ process in the invariant mass region $116 < m_{\ell\ell} < 150$ GeV extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the $W^- \to \mu^-\bar{\nu}$ process extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the $W^+ \to \mu^+\nu$ process extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the central $Z/\gamma^* \to \mu\mu$ process in the invariant mass region $66 < m_{\ell\ell} < 116$ GeV extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the central $Z/\gamma^* \to \mu\mu$ process in the invariant mass region $46 < m_{\ell\ell} < 66$ GeV extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Differential cross section for the central $Z/\gamma^* \to \mu\mu$ process in the invariant mass region $116 < m_{\ell\ell} < 150$ GeV extrapolated to the common fiducial region. The statistical, uncorrelated systematic, correlated systematic and luminosity uncertainties are given in percent.

Values of $E(W[Z])$ and $A(W[Z])$ correction factors for integrated $W\to\ell\nu$ and $Z\to\ell\ell$ measurements together with the total estimated uncertainties in percent. The separate electron and muon measurements are divided by the $E(W[Z])$ factors, as defined in Eq.(8), to correct them to the corresponding common fiducial region. The $A(W[Z])$ factors, defined in Eq. (9), are used to extract a total cross section. Finally, the ratios of $A(W[Z])$ correction factors are given for four combinations of $W^+$, $W^-$ and $Z$ treating all components of the $A(W[Z])$ uncertainties as correlated between processes, which is relevant for the acceptance uncertainties on the total cross-section ratios.

Values of $E(W)$ correction factors for the differential $W\to\ell\nu$ measurements together with the total estimated uncertainties in percent. The separate electron and muon measurements are divided by the $E(W)$ factors, as defined in Eq.(8), to correct them to the corresponding common fiducial region. This only affects the bin of highest $\eta_\ell$, all other $E(W)$ factors are exactly 1 without uncertainties.

Values of $E(Z)$ correction factors for the differential $Z/\gamma^*\to e^+e^-$ measurements together with the total estimated uncertainties in percent. The separate electron and muon measurements are divided by the $E(Z)$ factors, as defined in Eq.(8), to correct them to the corresponding common fiducial region.

Values of $E(Z)$ correction factors for the differential $Z/\gamma^*\to \mu^+\mu^-$ measurements together with the total estimated uncertainties in percent. The separate electron and muon measurements are divided by the $E(Z)$ factors, as defined in Eq.(8), to correct them to the corresponding common fiducial region.

Values of $E(Z)$ correction factors for the differential forward $Z/\gamma^*\to e^+e^-$ measurements together with the total estimated uncertainties in percent. The separate electron and muon measurements are divided by the $E(Z)$ factors, as defined in Eq.(8), to correct them to the corresponding common fiducial region.

Correlation coefficients between integrated cross sections extrapolated to the total phase space, $\sigma^\mathrm{tot}_{W \to \ell\nu}$ and $\sigma^\mathrm{tot}_{Z/\gamma^* \to \ell\ell}$ for four combinations of $W^+, W^-, W^{\pm}$ and $Z$. Values are given including and excluding the luminosity uncertainties.

Correlation coefficients between integrated fiducial cross sections in electron and muon channels for $W^{\pm}$ and $Z$. Values are given including and excluding the luminosity uncertainties.

The differential W charge asymmetry $A_{\ell}$ as defined in Eq. (19) from the combined electron and muon channel measurements. All uncertainties are quoted in % with respect to the $A_{\ell}$ values. The statistical (stat), uncorrelated (uncor) and correlated (cor) systematic uncertainties are reported.

Combined NNLO QCD and NLO EW predictions as defined in Eq. (15), c.f. Section 6.1.2 and Ref. [110] Chapter III.2.3, for the integrated common fiducial cross sections using Table 15 input parameters and various NNLO PDFs. The given uncertainties correspond to the statistical accuracy from the numerical DYNNLO 1.5 integration (stat) and the PDF uncertainties, where the latter are evaluated following the different prescriptions of the PDF groups.

Combined NNLO QCD and NLO EW predictions as defined in Eq. (15), c.f. Section 6.1.2 and Ref. [110] Chapter III.2.3, for the differential common fiducial cross sections for the $W^+ \to \ell^+\nu$ process using Table 15 input parameters and various NNLO PDFs. The given uncertainties correspond to the statistical accuracy from the numerical DYNNLO 1.5 integration (stat) and the PDF uncertainties, where the latter are evaluated following the different prescriptions of the PDF groups.

Combined NNLO QCD and NLO EW predictions as defined in Eq. (15), c.f. Section 6.1.2 and Ref. [110] Chapter III.2.3, for the differential common fiducial cross sections for the $W^- \to \ell^-\bar{\nu}$ process$ using Table 15 input parameters and various NNLO PDFs. The given uncertainties correspond to the statistical accuracy from the numerical DYNNLO 1.5 integration (stat) and the PDF uncertainties, where the latter are evaluated following the different prescriptions of the PDF groups.

Combined NNLO QCD and NLO EW predictions as defined in Eq. (15), c.f. Section 6.1.2 and Ref. [110] Chapter III.2.3, for the differential common fiducial W charge asymmetry $A_{\ell}$ using Table 15 input parameters and various NNLO PDFs. The given uncertainties correspond to the statistical accuracy from the numerical DYNNLO 1.5 integration (stat) and the PDF uncertainties, where the latter are evaluated following the different prescriptions of the PDF groups.

Combined NNLO QCD and NLO EW predictions as defined in Eq. (15), c.f. Section 6.1.2 and Ref. [110] Chapter III.2.3, for the differential common fiducial cross sections for the central $Z/\gamma^* \to \ell\ell$ processes in the invariant mass region $46 < m_{\ell\ell} < 66$ GeV using Table 15 input parameters and various NNLO PDFs. The given uncertainties correspond to the statistical accuracy from the numerical DYNNLO 1.5 integration (stat) and the PDF uncertainties, where the latter are evaluated following the different prescriptions of the PDF groups. The term 'EW' quantifies the deviation in case of using the NNLO QCD and NLO EW combination procedure as defined in Eq. (13) from the nominal prescription in Eq. (15), where the effect is symmetrised ($\pm$). All predictions are corrected for leading two-loop EW contributions.

Combined NNLO QCD and NLO EW predictions as defined in Eq. (15), c.f. Section 6.1.2 and Ref. [110] Chapter III.2.3, for the differential common fiducial cross sections for the central $Z/\gamma^* \to \ell\ell$ processes in the invariant mass region $66 < m_{\ell\ell} < 116$ GeV using Table 15 input parameters and various NNLO PDFs. The given uncertainties correspond to the statistical accuracy from the numerical DYNNLO 1.5 integration (stat) and the PDF uncertainties, where the latter are evaluated following the different prescriptions of the PDF groups. The term 'EW' quantifies the deviation in case of using the NNLO QCD and NLO EW combination procedure as defined in Eq. (13) from the nominal prescription in Eq. (15), where the effect is symmetrised ($\pm$).

Combined NNLO QCD and NLO EW predictions as defined in Eq. (15), c.f. Section 6.1.2 and Ref. [110] Chapter III.2.3, for the differential common fiducial cross sections for the central $Z/\gamma^* \to \ell\ell$ processes in the invariant mass region $116 < m_{\ell\ell} < 150$ GeV using Table 15 input parameters and various NNLO PDFs. The given uncertainties correspond to the statistical accuracy from the numerical DYNNLO 1.5 integration (stat) and the PDF uncertainties, where the latter are evaluated following the different prescriptions of the PDF groups. The term 'EW' quantifies the deviation in case of using the NNLO QCD and NLO EW combination procedure as defined in Eq. (13) from the nominal prescription in Eq. (15), where the effect is symmetrised ($\pm$).

Combined NNLO QCD and NLO EW predictions as defined in Eq. (15), c.f. Section 6.1.2 and Ref. [110] Chapter III.2.3, for the differential common fiducial cross sections for the forward $Z/\gamma^* \to \ell\ell$ processes in the invariant mass region $66 < m_{\ell\ell} < 116$ GeV using Table 15 input parameters and various NNLO PDFs. The given uncertainties correspond to the statistical accuracy from the numerical DYNNLO 1.5 integration (stat) and the PDF uncertainties, where the latter are evaluated following the different prescriptions of the PDF groups. The term 'EW' quantifies the deviation in case of using the NNLO QCD and NLO EW combination procedure as defined in Eq. (13) from the nominal prescription in Eq. (15), where the effect is symmetrised ($\pm$).

Combined NNLO QCD and NLO EW predictions as defined in Eq. (15), c.f. Section 6.1.2 and Ref. [110] Chapter III.2.3, for the differential common fiducial cross sections for the forward $Z/\gamma^* \to \ell\ell$ processes in the invariant mass region $116 < m_{\ell\ell} < 150$ GeV using Table 15 input parameters and various NNLO PDFs. The given uncertainties correspond to the statistical accuracy from the numerical DYNNLO 1.5 integration (stat) and the PDF uncertainties, where the latter are evaluated following the different prescriptions of the PDF groups. The term 'EW' quantifies the deviation in case of using the NNLO QCD and NLO EW combination procedure as defined in Eq. (13) from the nominal prescription in Eq. (15), where the effect is symmetrised ($\pm$).

Nominal NNLO QCD + NLO EW $K_f$-factors as defined in Eq. (20) for the differential $W^+ \to \ell^+\nu$ process. The $K_f$-factor is calculated as ratio of the best NNLO QCD + NLO EW prediction to the NLO QCD calculation using the MCFM/APPLGRID calculation, both using the ATLAS-epWZ12 NNLO PDF set, c.f. Section 7.1. In addition to the nominal $K_f$-factor, a full set of alternative $K$-factors is presented reflecting the following systematic variations, c.f. Tables 19 and 21. The factor $K_{FEWZ}$ uses FEWZ 3.1.b2 for the NNLO QCD prediction, combined with NLO EW. The factors $K_\mu$ reflect the variation of the renormalisation and factorisations scales ($\mu_R, \mu_F$ up/down) by factors of 2 and 0.5, respectively. The statistical uncertainty on each $K_f$-factor (stat) is obtained from the NNLO QCD calculation, while the numerical uncertainties from all other contributions are negligible.

Nominal NNLO QCD + NLO EW $K_f$-factors as defined in Eq. (20) for the differential $W^- \to \ell^-\bar{\nu}$ process. The $K_f$-factor is calculated as ratio of the best NNLO QCD + NLO EW prediction to the NLO QCD calculation using the MCFM/APPLGRID calculation, both using the ATLAS-epWZ12 NNLO PDF set, c.f. Section 7.1. In addition to the nominal $K_f$-factor, a full set of alternative $K$-factors is presented reflecting the following systematic variations, c.f. Tables 19 and 21. The factor $K_{FEWZ}$ uses FEWZ 3.1.b2 for the NNLO QCD prediction, combined with NLO EW. The factors $K_\mu$ reflect the variation of the renormalisation and factorisations scales ($\mu_R, \mu_F$ up/down) by factors of 2 and 0.5, respectively. The statistical uncertainty on each $K_f$-factor (stat) is obtained from the NNLO QCD calculation, while the numerical uncertainties from all other contributions are negligible.

Nominal NNLO QCD + NLO EW $K_f$-factors as defined in Eq. (20) for the differential central $Z/\gamma^* \to \ell\ell$ process in the invariant mass region $46 < m_{\ell\ell} < 66$ GeV. The $K_f$-factor is calculated as ratio of the best NNLO QCD + NLO EW prediction to the NLO QCD calculation using the MCFM/APPLGRID calculation, both using the ATLAS-epWZ12 NNLO PDF set, c.f. Section 7.1. In addition to the nominal $K_f$-factor, a full set of alternative $K$-factors is presented reflecting the following systematic variations, c.f. Tables 19 and 21. The factor $K_{FEWZ}$ uses the FEWZ 3.1.b2 NNLO QCD prediction, combined with NLO EW. The factors $K_\mu$ reflect the variation of the renormalisation and factorisations scales ($\mu_R, \mu_F$ up/down) by factors 2 and 0.5, respectively. The factors $K_{EW}$ quantify the deviation in case of using the NNLO QCD and NLO EW combination procedure as defined in Eq. (13) from the nominal prescription in Eq. (15), where the effect is symmetrised (EW up/down). The statistical uncertainty on each $K_f$-factor (stat) is obtained from the NNLO QCD calculation, while the numerical uncertainties from all other contributions is negligible.

Nominal NNLO QCD + NLO EW $K_f$-factors as defined in Eq. (20) for the differential central $Z/\gamma^* \to \ell\ell$ process in the invariant mass region $66 < m_{\ell\ell} < 116$ GeV. The $K_f$-factor is calculated as ratio of the best NNLO QCD + NLO EW prediction to the NLO QCD calculation using the MCFM/APPLGRID calculation, both using the ATLAS-epWZ12 NNLO PDF set, c.f. Section 7.1. In addition to the nominal $K_f$-factor, a full set of alternative $K$-factors is presented reflecting the following systematic variations, c.f. Tables 19 and 21. The factor $K_{FEWZ}$ uses the FEWZ 3.1.b2 NNLO QCD prediction, combined with NLO EW. The factors $K_\mu$ reflect the variation of the renormalisation and factorisations scales ($\mu_R, \mu_F$ up/down) by factors 2 and 0.5, respectively. The factors $K_{EW}$ quantify the deviation in case of using the NNLO QCD and NLO EW combination procedure as defined in Eq. (13) from the nominal prescription in Eq. (15), where the effect is symmetrised (EW up/down). The statistical uncertainty on each $K_f$-factor (stat) is obtained from the NNLO QCD calculation, while the numerical uncertainties from all other contributions is negligible.

Nominal NNLO QCD + NLO EW $K_f$-factors as defined in Eq. (20) for the differential central $Z/\gamma^* \to \ell\ell$ process in the invariant mass region $116 < m_{\ell\ell} < 150$ GeV. The $K_f$-factor is calculated as ratio of the best NNLO QCD + NLO EW prediction to the NLO QCD calculation using the MCFM/APPLGRID calculation, both using the ATLAS-epWZ12 NNLO PDF set, c.f. Section 7.1. In addition to the nominal $K_f$-factor, a full set of alternative $K$-factors is presented reflecting the following systematic variations, c.f. Tables 19 and 21. The factor $K_{FEWZ}$ uses the FEWZ 3.1.b2 NNLO QCD prediction, combined with NLO EW. The factors $K_\mu$ reflect the variation of the renormalisation and factorisations scales ($\mu_R, \mu_F$ up/down) by factors 2 and 0.5, respectively. The factors $K_{EW}$ quantify the deviation in case of using the NNLO QCD and NLO EW combination procedure as defined in Eq. (13) from the nominal prescription in Eq. (15), where the effect is symmetrised (EW up/down). The statistical uncertainty on each $K_f$-factor (stat) is obtained from the NNLO QCD calculation, while the numerical uncertainties from all other contributions is negligible.

Nominal NNLO QCD + NLO EW $K_f$-factors as defined in Eq. (20) for the differential forward $Z/\gamma^* \to \ell\ell$ process in the invariant mass region $66 < m_{\ell\ell} < 116$ GeV. The $K_f$-factor is calculated as ratio of the best NNLO QCD + NLO EW prediction to the NLO QCD calculation using the MCFM/APPLGRID calculation, both using the ATLAS-epWZ12 NNLO PDF set, c.f. Section 7.1. In addition to the nominal $K_f$-factor, a full set of alternative $K$-factors is presented reflecting the following systematic variations, c.f. Tables 19 and 21. The factor $K_{FEWZ}$ uses the FEWZ 3.1.b2 NNLO QCD prediction, combined with NLO EW. The factors $K_\mu$ reflect the variation of the renormalisation and factorisations scales ($\mu_R, \mu_F$ up/down) by factors 2 and 0.5, respectively. The factors $K_{EW}$ quantify the deviation in case of using the NNLO QCD and NLO EW combination procedure as defined in Eq. (13) from the nominal prescription in Eq. (15), where the effect is symmetrised (EW up/down). The statistical uncertainty on each $K_f$-factor (stat) is obtained from the NNLO QCD calculation, while the numerical uncertainties from all other contributions is negligible.

Nominal NNLO QCD + NLO EW $K_f$-factors as defined in Eq. (20) for the differential forward $Z/\gamma^* \to \ell\ell$ process in the invariant mass region $116 < m_{\ell\ell} < 150$ GeV. The $K_f$-factor is calculated as ratio of the best NNLO QCD + NLO EW prediction to the NLO QCD calculation using the MCFM/APPLGRID calculation, both using the ATLAS-epWZ12 NNLO PDF set, c.f. Section 7.1. In addition to the nominal $K_f$-factor, a full set of alternative $K$-factors is presented reflecting the following systematic variations, c.f. Tables 19 and 21. The factor $K_{FEWZ}$ uses the FEWZ 3.1.b2 NNLO QCD prediction, combined with NLO EW. The factors $K_\mu$ reflect the variation of the renormalisation and factorisations scales ($\mu_R, \mu_F$ up/down) by factors 2 and 0.5, respectively. The factors $K_{EW}$ quantify the deviation in case of using the NNLO QCD and NLO EW combination procedure as defined in Eq. (13) from the nominal prescription in Eq. (15), where the effect is symmetrised (EW up/down). The statistical uncertainty on each $K_f$-factor (stat) is obtained from the NNLO QCD calculation, while the numerical uncertainties from all other contributions is negligible.

Correction factors estimated from Powheg+Pythia6+Photos samples, c.f. Section 2.2, to convert the integrated common fiducial cross-section measurements from Born QED level, c.f. Section 6.1.2, to a "dressed" and "bare" QED FSR definition. The "dressed" level is obtained from the charged final-state lepton(s) combined with all FSR photons within a cone R, as defined in Footnote 1, of R<0.1. The "bare" level is obtained from the charged final-state lepton(s) after QED FSR losses. The factors $C_{dressed}$ ($C_{bare}$) are defined as the ratio of the dressed (bare) to the Born QED level cross sections. The statistical uncertainties are negligible on these correction factors.

Correction factors estimated from Powheg+Pythia6+Photos samples, c.f. Section 2.2, to convert the differential common fiducial $W^+ \to e^+\nu$ cross-section measurements from Born QED level, c.f. Section 6.1.2, to a "dressed" and "bare" QED FSR definition. The "dressed" level is obtained from the charged final-state lepton(s) combined with all FSR photons within a cone R, as defined in Footnote 1, of R<0.1. The "bare" level is obtained from the charged final-state lepton(s) after QED FSR losses. The factors $C_{dressed}$ ($C_{bare}$) are defined as the ratio of the dressed (bare) to the Born QED level cross sections. The statistical uncertainties (stat) are given.

Correction factors estimated from Powheg+Pythia6+Photos samples, c.f. Section 2.2, to convert the differential common fiducial $W^- \to e^-\bar{\nu}$ cross-section measurements from Born QED level, c.f. Section 6.1.2, to a "dressed" and "bare" QED FSR definition. The "dressed" level is obtained from the charged final-state lepton(s) combined with all FSR photons within a cone R, as defined in Footnote 1, of R<0.1. The "bare" level is obtained from the charged final-state lepton(s) after QED FSR losses. The factors $C_{dressed}$ ($C_{bare}$) are defined as the ratio of the dressed (bare) to the Born QED level cross sections. The statistical uncertainties (stat) are given.

Correction factors estimated from Powheg+Pythia6+Photos samples, c.f. Section 2.2, to convert the differential common fiducial $W^+ \to \mu^+\nu$ cross-section measurements from Born QED level, c.f. Section 6.1.2, to a "dressed" and "bare" QED FSR definition. The "dressed" level is obtained from the charged final-state lepton(s) combined with all FSR photons within a cone R, as defined in Footnote 1, of R<0.1. The "bare" level is obtained from the charged final-state lepton(s) after QED FSR losses. The factors $C_{dressed}$ ($C_{bare}$) are defined as the ratio of the dressed (bare) to the Born QED level cross sections. The statistical uncertainties (stat) are given.

Correction factors estimated from Powheg+Pythia6+Photos samples, c.f. Section 2.2, to convert the differential common fiducial $W^- \to \mu^-\bar{\nu}$ cross-section measurements from Born QED level, c.f. Section 6.1.2, to a "dressed" and "bare" QED FSR definition. The "dressed" level is obtained from the charged final-state lepton(s) combined with all FSR photons within a cone R, as defined in Footnote 1, of R<0.1. The "bare" level is obtained from the charged final-state lepton(s) after QED FSR losses. The factors $C_{dressed}$ ($C_{bare}$) are defined as the ratio of the dressed (bare) to the Born QED level cross sections. The statistical uncertainties (stat) are given.

Correction factors estimated from Powheg+Pythia6+Photos samples, c.f. Section 2.2, to convert the differential common fiducial central $Z/\gamma^* \to ee$ cross-section measurements from Born QED level, c.f. Section 6.1.2, to a "dressed" and "bare" QED FSR definition. The "dressed" level is obtained from the charged final-state lepton(s) combined with all FSR photons within a cone R, as defined in Footnote 1, of R<0.1. The "bare" level is obtained from the charged final-state lepton(s) after QED FSR losses. The factors $C_{dressed}$ ($C_{bare}$) are defined as the ratio of the dressed (bare) to the Born QED level cross sections. The statistical uncertainties (stat) are given.

Correction factors estimated from Powheg+Pythia6+Photos samples, c.f. Section 2.2, to convert the differential common fiducial central $Z/\gamma^* \to \mu\mu$ cross-section measurements from Born QED level, c.f. Section 6.1.2, to a "dressed" and "bare" QED FSR definition. The "dressed" level is obtained from the charged final-state lepton(s) combined with all FSR photons within a cone R, as defined in Footnote 1, of R<0.1. The "bare" level is obtained from the charged final-state lepton(s) after QED FSR losses. The factors $C_{dressed}$ ($C_{bare}$) are defined as the ratio of the dressed (bare) to the Born QED level cross sections. The statistical uncertainties (stat) are given.

Correction factors estimated from Powheg+Pythia6+Photos samples, c.f. Section 2.2, to convert the differential common fiducial forward $Z/\gamma^* \to ee$ cross-section measurements from Born QED level, c.f. Section 6.1.2, to a "dressed" and "bare" QED FSR definition. The "dressed" level is obtained from the charged final-state lepton(s) combined with all FSR photons within a cone R, as defined in Footnote 1, of R<0.1. The "bare" level is obtained from the charged final-state lepton(s) after QED FSR losses. The factors $C_{dressed}$ ($C_{bare}$) are defined as the ratio of the dressed (bare) to the Born QED level cross sections. The statistical uncertainties (stat) are given.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $467 < m^{\gamma-\rm jet1} < 510$ GeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $510 < m^{\gamma-\rm jet1} < 590$ GeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $590 < m^{\gamma-\rm jet1} < 670$ GeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $670 < m^{\gamma-\rm jet1} < 760$ GeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $760 < m^{\gamma-\rm jet1} < 850$ GeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $850 < m^{\gamma-\rm jet1} < 950$ GeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $0.95 < m^{\gamma-\rm jet1} < 1.05$ TeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $1.05 < m^{\gamma-\rm jet1} < 1.25$ TeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $1.25 < m^{\gamma-\rm jet1} < 2.45$ TeV.

Measured cross sections for isolated-photon plus 2jet production as a function of $E_{\rm T}^{\gamma}$.

Measured cross sections for isolated-photon plus 2jet production as a function of $p_{\rm T}^{\rm jet2}$.

Measured cross sections for isolated-photon plus 2jet production as a function of $\Delta\phi^{\rm \gamma-jet2}$.

Measured cross sections for isolated-photon plus 2jet production as a function of $\Delta\phi^{\rm jet1-jet2}$.

Measured cross sections for isolated-photon plus 2jet production as a function of $\Delta\phi^{\rm \gamma-jet2}$ for the range $130< E_{\rm T}^{\gamma} <300$ GeV.

Measured cross sections for isolated-photon plus 2jet production as a function of $\Delta\phi^{\rm \gamma-jet2}$ for the range $E_{\rm T}^{\gamma} >300$ GeV.

Measured cross sections for isolated-photon plus 2jet production as a function of $\Delta\phi^{\rm jet1-jet2}$ for the range $130< E_{\rm T}^{\gamma} <300$ GeV.

Measured cross sections for isolated-photon plus 2jet production as a function of $\Delta\phi^{\rm jet1-jet2}$ for the range $E_{\rm T}^{\gamma} >300$ GeV.

Measured cross sections for isolated-photon plus 2jet production as a function of $\beta^{\rm jet1}$.

Measured cross sections for isolated-photon plus 2jet production as a function of $\beta^{\gamma}$.

Ratio of measured cross sections for isolated-photon plus 2jet production as a function of $\beta$.

Measured cross sections for isolated-photon plus 3jet production as a function of $E_{\rm T}^{\gamma}$.

Measured cross sections for isolated-photon plus 3jet production as a function of $p_{\rm T}^{\rm jet3}$.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm \gamma-jet3}$.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm jet1-jet3}$.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm jet2-jet3}$.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm \gamma-jet3}$ for the range $130< E_{\rm T}^{\gamma} <300$ GeV.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm \gamma-jet3}$ for the range $E_{\rm T}^{\gamma} >300$ GeV.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm jet1-jet3}$ for the range $130< E_{\rm T}^{\gamma} <300$ GeV.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm jet1-jet3}$ for the range $E_{\rm T}^{\gamma} >300$ GeV.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm jet2-jet3}$ for the range $130< E_{\rm T}^{\gamma} <300$ GeV.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm jet2-jet3}$ for the range $E_{\rm T}^{\gamma} >300$ GeV.

HT inclusive distribution in SRZ.

Jet multiplicity distribution in SRZ.

B-tagged jet multiplicity distribution in SRZ.

Dilepton invariant mass distribution in SRMedium.

Dilepton invariant mass distribution in SRMedium.

Dilepton invariant mass in SRHigh.

Expected 95% exclusion contour for the gluino simplified model with fixed N1 mass and decays to quarks and Z bosons in SRZ.

Observed 95% exclusion contour for the gluino simplified model with fixed N1 mass and decays to quarks and Z bosons in SRZ.

Expected 95% exclusion contour for the squark simplified model with fixed N1 mass and decays to quarks and Z bosons in SRZ.

Observed 95% exclusion contour for the squark simplified model with fixed N1 mass and decays to quarks and Z bosons in SRZ.

Expected 95% exclusion contour for the gluino simplified model with varying N1 mass and decays to quarks and Z bosons in SRZ.

Observed 95% exclusion contour for the gluino simplified model with varying N1 mass and decays to quarks and Z bosons in SRZ.

Expected 95% exclusion contour for the gluino simplified model with sleptons in the edge SRs.

Observed 95% exclusion contour for the gluino simplified model with sleptons in the edge SRs.

Expected 95% exclusion contour for the gluino simplified model with decays to on- or off-shell Z bosons in the edge SRs.

Observed 95% exclusion contour for the gluino simplified model with decays to on- or off-shell Z bosons in the edge SRs.

Expected 95% exclusion contour for the gluino simplified model with decays to on- or off-shell Z bosons in SRZ.

Observed 95% exclusion contour for the gluino simplified model with decays to on- or off-shell Z bosons in SRZ.

Cutflow table for three benchmark signal points from the $\tilde{g}$--$\chi_{2}^{0}$ on-shell grid in SRZ for the $ee$ and $\mu\mu$ channels separately. The number of generated events is N RAW, while N WEIGHTED corresponds to the number of events expected in 14.7/fb, after all MC simulation corrections have been applied.

Cutflow table for three benchmark signal points for the slepton model in SR-low, SR-medium and SR-high for the $ee$ and $\mu\mu$ channels separately. The number of generated events is N RAW, while N WEIGHTED corresponds to the number of events expected in 14.7/fb, after all MC simulation corrections have been applied. The event generation was filtered to require at least two leptons (electrons or muons) with $p_{T}>5$ GeV and $|\eta|<2.8$, with 20000 events required to pass the filter. The corresponding number of unfiltered events is provided in the ``Pre-filter events'' row of the table.

Signal acceptance for the gluino simplified model with decays to quarks and Z bosons in SRZ.

Signal efficiency for the gluino simplified model with decays to quarks and Z bosons in SRZ.

Signal acceptance for the gluino simplified model with decays via sleptons in SRLow.

Signal efficiency for the gluino simplified model with decays via sleptons in SRLow.

Signal acceptance for the gluino simplified model with decays via sleptons in SRMedium.

Signal efficiency for the gluino simplified model with decays via sleptons in SRMedium.

Signal acceptance for the gluino simplified model with decays via sleptons in SRHigh.

Signal efficiency for the gluino simplified model with decays via sleptons in SRHigh.

Upper limits on the signal cross-section at 95% CL for the gluino simplified model with fixed N1 mass and decays to quarks and Z bosons in SRZ.

Upper limits on the signal cross-section at 95% CL for the squark simplified model with fixed N1 mass and decays to quarks and Z bosons in SRZ.

Upper limits on the signal cross-section at 95% CL for the gluino simplified model with varying N1 mass and decays to quarks and Z bosons in SRZ.

Upper limits on the signal cross-section at 95% CL for the gluino simplified model with decays via sleptons.

Upper limits on the signal cross-section at 95% CL for the gluino simplified model with decays to on-shell or off-shell Z bosons.