Differential cross-section for non-prompt chi_c2 production, measured in bins of J/psi pT, assuming unpolarised chi_c production. The measurements are not corrected for the branching fractions of the decays chi_c --> J/psi + gamma and J/psi --> mu+ mu-. The uncertainty envelope associated with the unknown chi_c spin alignment is also shown.

Differential cross-section for prompt chi_c1 production, measured in bins of chi_c1 pT, assuming unpolarised chi_c production. The measurements are not corrected for the branching fractions of the decays chi_c --> J/psi + gamma and J/psi --> mu+ mu-. The uncertainty envelope associated with the unknown chi_c spin alignment is also shown.

Differential cross-section for prompt chi_c2 production, measured in bins of chi_c2 pT, assuming unpolarised chi_c production. The measurements are not corrected for the branching fractions of the decays chi_c --> J/psi + gamma and J/psi --> mu+ mu-. The uncertainty envelope associated with the unknown chi_c spin alignment is also shown.

Differential cross-section for non-prompt chi_c1 production, measured in bins of chi_c1 pT, assuming unpolarised chi_c production. The measurements are not corrected for the branching fractions of the decays chi_c --> J/psi + gamma and J/psi --> mu+ mu-. The uncertainty envelope associated with the unknown chi_c spin alignment is also shown.

Differential cross-section for non-prompt chi_c2 production, measured in bins of chi_c2 pT, assuming unpolarised chi_c production. The measurements are not corrected for the branching fractions of the decays chi_c --> J/psi + gamma and J/psi --> mu+ mu-. The uncertainty envelope associated with the unknown chi_c spin alignment is also shown.

Fraction of prompt J/psi produced in feed-down from radiative chi_c decays as a function of J/psi pT, assuming unpolarised chi_c production. The uncertainty envelope associated with the unknown chi_c spin alignment is also shown. The spin-alignment envelope assumes that prompt J/psi are produced unpolarised and represents the maximum uncertainty due to the unknown chi_c spin alignment.

Production rate of prompt chi_c2 relative to prompt chi_c1, measured in bins of J/psi pT, assuming unpolarised chi_c production. The ratio is not corrected for the branching fractions of chi_c1 and chi_c2 into J/psi gamma. The uncertainty envelope associated with the unknown chi_c spin alignment is also shown.

Production rate of non-prompt chi_c2 relative to non-prompt chi_c1, measured in bins of J/psi pT, assuming unpolarised chi_c production. The ratio is not corrected for the branching fractions of chi_c1 and chi_c2 into J/psi gamma. The uncertainty envelope associated with the unknown chi_c spin alignment is also shown.

Fraction of chi_c1 produced in b-hadron decays as a function of chi_c1 pT, assuming unpolarised chi_c production. The uncertainty envelope associated with the unknown chi_c spin alignment is also shown.

Fraction of chi_c2 produced in b-hadron decays as a function of chi_c2 pT, assuming unpolarised chi_c production. The uncertainty envelope associated with the unknown chi_c spin alignment is also shown.

Numbers of observed and background events for SR3L low for each bin of the distribution in Meff. The table corresponds to Fig. 4(d). The statistical and systematic uncertainties are combined for the predicted numbers.

Numbers of observed and background events for SR3L high for each bin of the distribution in Meff. The table corresponds to Fig. 4(e). The statistical and systematic uncertainties are combined for the predicted numbers.

The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).

The efficiencies are calculated for all simplified extra dimension model (see Fig. 8d in the paper). For each model, the values are given for the five signal regions and their combination.

The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).

The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).

The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.

The efficiencies are calculated for all mSUGRA models (see Fig. 8a in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, and mu>0.

The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop) - 20 GeV.

The efficiencies are calculated for all GMSB models (see Fig. 8c in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes mmess=250 TeV, m5=3, mu>0, and Cgrav=1.

The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.

The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into b s and gluinos decay into t stop (see Fig. 5d in the paper).

The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).

The efficiencies are calculated for all mSUGRA/CMSSM models with bRPV (see Fig. 8b in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, mu>0, and bRPV.

The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).

The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).

The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluino), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.

The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).

The acceptances (in percent, %) are calculated for all simplified extra dimension model (see Fig. 8d in the paper). For each model, the values are given for the five signal regions and their combination.

The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).

The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).

The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.

The acceptances (in percent, %) are calculated for all mSUGRA models (see Fig. 8a in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, and mu>0.

The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop) - 20 GeV.

The acceptances (in percent, %) are calculated for all GMSB models (see Fig. 8c in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes mmess=250 TeV, m5=3, mu>0, and Cgrav=1.

The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.

The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into bs and gluinos decay into t stop (see Fig. 5d in the paper).

The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).

The acceptances (in percent, %) are calculated for all mSUGRA/CMSSM models with bRPV (see Fig. 8b in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, mu>0, and bRPV.

The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).

The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).

The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluino), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.

The limits on observed cross section are calculated for all simplified models. The simplified models are for direct pair production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).

The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct pair-production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).

The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).

The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.

The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct pair production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop) - 20 GeV.

The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.

The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into bs and gluinos decay into t stop (see Fig. 5d in the paper).

The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).

The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).

The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).

The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct pair production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluino), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.

The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).

The signal event yields are calculated for all simplified extra dimension model (see Fig. 8d in the paper). For each model, the values are given for the five signal regions and their combination.

The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).

The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).

The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.

The signal event yields are calculated for all mSUGRA models (see Fig. 8a in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, and mu>0.

The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop)-20 GeV.

The signal event yields are calculated for all GMSB models (see Fig. 8c in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes mmess=250 TeV, m5=3, mu>0, and Cgrav=1.

The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.

The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into bs and gluinos decay into t stop (see Fig. 5d in the paper).

The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).

The signal event yields are calculated for all mSUGRA/CMSSM models with bRPV (see Fig. 8b in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, mu>0, and bRPV.

The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).

The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).

The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluino), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.

Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).

Experimental uncertainties on the signal event yields are calculated for all simplified extra dimension model (see Fig. 8d in the paper). For each model, the values are given for the five signal regions and their combination.

Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).

Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).

Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.

Experimental uncertainties on the signal event yields are calculated for all mSUGRA models (see Fig. 8a in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, and mu>0.

Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop) - 20 GeV.

Experimental uncertainties on the signal event yields are calculated for all GMSB models (see Fig. 8c in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes mmess=250 TeV, m5=3, mu>0, and Cgrav=1.

Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.

Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into bs and gluinos decay into t stop (see Fig. 5d in the paper).

Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).

Experimental uncertainties on the signal event yields are calculated for all mSUGRA/CMSSM models with bRPV (see Fig. 8b in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, mu>0, and bRPV.

Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).

Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).

Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluino), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.

Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).

Statistical uncertainties on the signal event yields are calculated for all simplified extra dimension model (see Fig. 8d in the paper). For each model, the values are given for the five signal regions and their combination.

Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).

Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).

Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.

Statistical uncertainties on the signal event yields are calculated for all mSUGRA models (see Fig. 8a in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, and mu>0.

Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop) - 20 GeV.

Statistical uncertainties on the signal event yields are calculated for all GMSB models (see Fig. 8c in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes mmess=250 TeV, m5=3, mu>0, and Cgrav=1.

Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.

Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into bs and gluinos decay into t stop (see Fig. 5d in the paper).

Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).

Statistical uncertainties on the signal event yields are calculated for all mSUGRA/CMSSM models with bRPV (see Fig. 8b in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, mu>0, and bRPV.

Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).

Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).

Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W ^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluino), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.

The confidence levels are calculated for all simplified models. For each model, the observed and expected values are given. The simplified model is for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.

The confidence levels are calculated for all simplified models. For each model, the observed and expected values are given. The simplified model is for direct production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).

The confidence levels are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).

The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).

The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct pair-production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluion), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.

The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop) - 20 GeV.

The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).

The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.

The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).

The confidence levels are calculated for all GMSB models (see Fig. 8c in the paper). For each model, the expected and observed values are given. The model assumes mmess=250 TeV, m5=3, mu>0, and Cgrav=1.

The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into bs and gluinos decay into t stop (see Fig. 5d in the paper).

The confidence levels are calculated for all mSUGRA/CMSSM models with bRPV (see Fig. 8b in the paper). For each model, the expected and observed values are given. The model assumes tan(beta)=30, A0=2m0, mu>0, and bRPV.

The confidence levels are calculated for all simplified extra dimension model (see Fig. 8d in the paper). For each model, the expected and observed values are given.

The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).

The confidence levels are calculated for all mSUGRA models (see Fig. 8a in the paper). For each model, the expected and observed values are given. The model assumes tan(beta)=30, A0=2m0, and mu>0.

Experimental cross-section values per bin in PB for COS(THETA*(2GAMMA)).

Measured double-differential dijet cross sections for the range 1.5 <= y* < 2.0 and jet radius parameter R = 0.4. The statistical uncertainties from data and MC simulation have been combined. The three columns correspond to nominal, stronger or weaker correlations between jet energy scale uncertainty components.

Measured double-differential dijet cross sections for the range 2.0 <= y* < 2.5 and jet radius parameter R = 0.4. The statistical uncertainties from data and MC simulation have been combined. The three columns correspond to nominal, stronger or weaker correlations between jet energy scale uncertainty components.

Measured double-differential dijet cross sections for the range 2.5 <= y* < 3.0 and jet radius parameter R = 0.4. The statistical uncertainties from data and MC simulation have been combined. The three columns correspond to nominal, stronger or weaker correlations between jet energy scale uncertainty components.

Measured double-differential dijet cross sections for the range 0.0 <= y* < 0.5 and jet radius parameter R = 0.6. The statistical uncertainties from data and MC simulation have been combined. The three columns correspond to nominal, stronger or weaker correlations between jet energy scale uncertainty components.

Measured double-differential dijet cross sections for the range 0.5 <= y* < 1.0 and jet radius parameter R = 0.6. The statistical uncertainties from data and MC simulation have been combined. The three columns correspond to nominal, stronger or weaker correlations between jet energy scale uncertainty components.

Measured double-differential dijet cross sections for the range 1.0 <= y* < 1.5 and jet radius parameter R = 0.6. The statistical uncertainties from data and MC simulation have been combined. The three columns correspond to nominal, stronger or weaker correlations between jet energy scale uncertainty components.

Measured double-differential dijet cross sections for the range 1.5 <= y* < 2.0 and jet radius parameter R = 0.6. The statistical uncertainties from data and MC simulation have been combined. The three columns correspond to nominal, stronger or weaker correlations between jet energy scale uncertainty components.

Measured double-differential dijet cross sections for the range 2.0 <= y* < 2.5 and jet radius parameter R = 0.6. The statistical uncertainties from data and MC simulation have been combined. The three columns correspond to nominal, stronger or weaker correlations between jet energy scale uncertainty components.

Measured double-differential dijet cross sections for the range 2.5 <= y* < 3.0 and jet radius parameter R = 0.6. The statistical uncertainties from data and MC simulation have been combined. The three columns correspond to nominal, stronger or weaker correlations between jet energy scale uncertainty components.

The effective mass distribution in VR2Z.

The ETmiss distribution in SR0noZa.

The effective mass distribution in SR0noZa.

The ETmiss distribution in SR1noZa.

The effective mass distribution in SR1noZa.

The ETmiss distribution in SR2noZa.

The effective mass distribution in SR2noZa.

The ETmiss distribution in SR0noZb.

The effective mass distribution in SR0noZb.

The ETmiss distribution in SR1noZb.

The effective mass distribution in SR1noZb.

The ETmiss distribution in SR2noZb.

The effective mass distribution in SR2noZb.

The ETmiss distribution in SR0Z.

The effective mass distribution in SR0Z.

The ETmiss distribution in SR1Z.

The effective mass distribution in SR1Z.

The ETmiss distribution in SR2Z.

The effective mass distribution in SR2Z.

Observed 95% CL exclusion contour for the RPV chargino NLSP model with lambda_121 != 0.

Expected 95% CL exclusion contour for the RPV chargino NLSP model with lambda_121 != 0.

Observed 95% CL exclusion contour for the RPV chargino NLSP model with lambda_122 != 0.

Expected 95% CL exclusion contour for the RPV chargino NLSP model with lambda_122 != 0.

Observed 95% CL exclusion contour for the RPV chargino NLSP model with lambda_133 != 0.

Expected 95% CL exclusion contour for the RPV chargino NLSP model with lambda_133 != 0.

Observed 95% CL exclusion contour for the RPV chargino NLSP model with lambda_233 != 0.

Expected 95% CL exclusion contour for the RPV chargino NLSP model with lambda_233 != 0.

Observed 95% CL exclusion contour for the RPV gluino NLSP model with lambda_121 != 0.

Expected 95% CL exclusion contour for the RPV gluino NLSP model with lambda_121 != 0.

Observed 95% CL exclusion contour for the RPV gluino NLSP model with lambda_122 != 0.

Expected 95% CL exclusion contour for the RPV gluino NLSP model with lambda_122 != 0.

Observed 95% CL exclusion contour for the RPV gluino NLSP model with lambda_133 != 0.

Expected 95% CL exclusion contour for the RPV gluino NLSP model with lambda_133 != 0.

Observed 95% CL exclusion contour for the RPV gluino NLSP model with lambda_233 != 0.

Expected 95% CL exclusion contour for the RPV gluino NLSP model with lambda_233 != 0.

Observed 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_121 != 0.

Expected 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_121 != 0.

Observed 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_122 != 0.

Expected 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_122 != 0.

Observed 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_133 != 0.

Expected 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_133 != 0.

Observed 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_233 != 0.

Expected 95% CL exclusion contour for the RPV Lslepton NLSP model with lambda_233 != 0.

Observed 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_121 != 0.

Expected 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_121 != 0.

Observed 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_122 != 0.

Expected 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_122 != 0.

Observed 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_133 != 0.

Expected 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_133 != 0.

Observed 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_233 != 0.

Expected 95% CL exclusion contour for the RPV Rslepton NLSP model with lambda_233 != 0.

Observed 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_121 != 0.

Expected 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_121 != 0.

Observed 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_122 != 0.

Expected 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_122 != 0.

Observed 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_133 != 0.

Expected 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_133 != 0.

Observed 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_233 != 0.

Expected 95% CL exclusion contour for the RPV sneutrino NLSP model with lambda_233 != 0.

Observed 95% CL exclusion contour for the R-slepton RPC model.

Expected 95% CL exclusion contour for the R-slepton RPC model.

Observed and expected 95% CL cross-section upper limits for the Stau RPC model, together with the theoretically predicted cross-section.

Observed and expected 95% CL cross-section upper limits for the Z RPC model, together with the theoretically predicted cross-section.

Observed 95% CL exclusion contour for the GGM tan beta = 1.5 model.

Expected 95% CL exclusion contour for the GGM tan beta = 1.5 model.

Observed 95% CL exclusion contour for the GGM tan beta = 30 model.

Expected 95% CL exclusion contour for the GGM tan beta = 30 model.

Observed 95% CL cross-section upper limit for the RPV chargino NLSP models with lambda_121 != 0 and lambda_122 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).

Observed 95% CL cross-section upper limit for the RPV chargino NLSP models with lambda_133 != 0 and lambda_233 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).

Observed 95% CL cross-section upper limit for the RPV gluino NLSP models with lambda_121 != 0 and lambda_122 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).

Observed 95% CL cross-section upper limit for the RPV gluino NLSP models with lambda_133 != 0 and lambda_233 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).

Observed 95% CL cross-section upper limit for the RPV Lslepton NLSP models with lambda_121 != 0 and lambda_122 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).

Observed 95% CL cross-section upper limit for the RPV Lslepton NLSP models with lambda_133 != 0 and lambda_233 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).

Observed 95% CL cross-section upper limit for the RPV Rslepton NLSP models with lambda_121 != 0 and lambda_122 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).

Observed 95% CL cross-section upper limit for the RPV Rslepton NLSP models with lambda_133 != 0 and lambda_233 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).

Observed 95% CL cross-section upper limit for the RPV sneutrino NLSP models with lambda_121 != 0 and lambda_122 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).

Observed 95% CL cross-section upper limit for the RPV sneutrino NLSP models with lambda_133 != 0 and lambda_233 != 0, and the selection of Z-veto signal regions used to set limits in these models. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bba' means that the regions SR0noZb, SR1noZb and SR2noZa were used, in addition to the three Z-rich regions (SR0-2Z).

Observed 95% CL cross-section upper limit for the R-slepton RPC model, and the selection of Z-veto signal regions used to set limits in this model. The combination of regions used is ordered by the minimum number of hadronic taus required. For example, ``bbb' means that the regions SR0noZb, SR1noZb and SR2noZb were used, in addition to the three Z-rich regions (SR0-2Z). For the RPC stau and Z models, the ``aaa' combination of regions was used throughout.

Performance of the SR0noZa selection in the R-slepton RPC model: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.

Performance of the SR0noZb selection in the RPV chargino NLSP model with lambda_121 != 0: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.

Performance of the SR1noZa selection in the RPV sneutrino NLSP model with lambda_233 != 0: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.

Performance of the SR1noZb selection in the RPV gluino NLSP model with lambda_133 != 0: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.

Performance of the SR2noZa selection in the RPV sneutrino NLSP model with lambda_233 != 0: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.

Performance of the SR2noZb selection in the RPV gluino NLSP model with lambda_133 != 0: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.

Performance of the SR0Z selection in the GGM tan beta = 30 model: number of generated signal events; total signal cross-section; acceptance; efficiency; total experimental systematic uncertainty, not including Monte Carlo statistics; observed CL using this region alone; expected CL using this region alone.

Cut flows for a representative selection of SUSY signal points in the Z-veto signal regions. In each case, m2 and m1 refer to the axes of the plots in Sec. XI, where m2 is the larger of the two masses. The number of events expected for a luminosity of 20.3 fb-1 is quoted at each step of the selection. The preselection requires four baseline leptons, at least two of which are light leptons; the signal lepton selection is made at the ``Lepton Multiplicity' stage. ``Event Cleaning' refers to the selection criteria applied to remove non-collision backgrounds and detector noise.

Cut flows for a representative selection of SUSY signal points in the Z-rich signal regions. In each case, m2 and m1 refer to the axes of the plots in Sec. XI, where m2 is the larger of the two masses (or the value of mu in the case of GGM models). The number of events expected for a luminosity of 20.3 fb-1 is quoted at each step of the selection. The preselection requires four baseline leptons, at least two of which are light leptons; the signal lepton selection is made at the ``Lepton Multiplicity' stage. ``Event Cleaning' refers to the selection criteria applied to remove non-collision backgrounds and detector noise.

Cut flows by lepton channel for a representative selection of SUSY signal points in the SR0noZa signal region. In each case, m2 and m1 refer to the axes of the plots in Sec. XI, where m2 is the larger of the two masses. The number of events expected for a luminosity of 20.3 fb-1 is quoted at each step of the selection. The preselection requires four baseline leptons, at least two of which are light leptons; the signal lepton selection is made at the ``Lepton Multiplicity' stage. ``Event Cleaning' refers to the selection criteria applied to remove non-collision backgrounds and detector noise. The RPC R-slepton model is used, with (m2,m1) = (450,300) GeV.

Cut flows by lepton channel for a representative selection of SUSY signal points in the SR1noZb signal region. In each case, m2 and m1 refer to the axes of the plots in Sec. XI, where m2 is the larger of the two masses. The number of events expected for a luminosity of 20.3 fb-1 is quoted at each step of the selection. The preselection requires four baseline leptons, at least two of which are light leptons; the signal lepton selection is made at the ``Lepton Multiplicity' stage. ``Event Cleaning' refers to the selection criteria applied to remove non-collision backgrounds and detector noise. The RPV gluino NLSP model is used, with lambda_133 != 0 and (m2,m1) = (800,400) GeV.

Cut flows by lepton channel for a representative selection of SUSY signal points in the SR0Z signal region. In each case, m2 and m1 refer to the axes of the plots in Sec. XI, where m2 is the value of mu. The number of events expected for a luminosity of 20.3 fb-1 is quoted at each step of the selection. The preselection requires four baseline leptons, at least two of which are light leptons; the signal lepton selection is made at the ``Lepton Multiplicity' stage. ``Event Cleaning' refers to the selection criteria applied to remove non-collision backgrounds and detector noise. The GGM tan beta = 30 model is used, with (m2,m1) = (200,1000) GeV.

Distribution of mT2 for events passing all the signal candidate selection requirements, except that on mT2 of the L100 selection, for DF events.

Distribution of mT2 for events passing all the signal candidate selection requirements, except that on mT2 of the L110 selection, for SF events.

Distribution of mT2 for events passing all the signal candidate selection requirements, except that on mT2 of the L110 selection, for DF events.

Observed 95% CL exclusion contour in the (STOP1, CHARGINO1) mass plane for a fixed value of m(NEUTRALINO1) = 1 GeV.

Expected 95% CL exclusion contour in the (STOP1, CHARGINO1) mass plane for a fixed value of m(NEUTRALINO1) = 1 GeV.

Observed 95% CL exclusion minus 1 sigma contour in the (STOP1, CHARGINO1) mass plane for a fixed value of m(NEUTRALINO1) = 1 GeV.

Observed 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane for a fixed value of m(STOP1) - m(CHARGINO1) = 10 GeV.

Expected 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane for a fixed value of m(STOP1) - m(CHARGINO1) = 10 GeV.

Observed 95% CL exclusion minus 1 sigma contour in the (STOP1, NEUTRALINO1) mass plane for a fixed value of m(STOP1) - m(CHARGINO1) = 10 GeV.

Observed 95% CL exclusion contour in the (CHARGINO1, NEUTRALINO1) mass plane for a fixed value of m(STOP1) = 300 GeV.

Expected 95% CL exclusion contour in the (CHARGINO1, NEUTRALINO1) mass plane for a fixed value of m(STOP1) = 300 GeV.

Observed 95% CL exclusion minus one sigma contour in the (CHARGINO1, NEUTRALINO1) mass plane for a fixed value of m(STOP1) = 300 GeV.

Observed 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane of m(CHARGINO1) = 2 m(NEUTRALINO1).

Expected 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane for m(CHARGINO1) = 2 m(NEUTRALINO1).

Observed 95% CL exclusion minus one sigma contour in the (STOP1, NEUTRALINO1) mass plane for m(CHARGINO1) = 2 m(NEUTRALINO1).

Observed 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane.

Expected 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane.

Observed 95% CL exclusion minus one sigma contour in the (STOP1, NEUTRALINO1) mass plane.

Observed 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane.

Expected 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane.

Observed 95% CL exclusion minus one sigma contour in the (STOP1, NEUTRALINO1) mass plane.

Observed 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane for a fixed value of m(CHARGINO1) = 106 GeV.

Expected 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane for a fixed value of m(CHARGINO1) = 106 GeV.

Observed 95% CL exclusion minus one sigma contour in the (STOP1, NEUTRALINO1) mass plane for a fixed value of m(CHARGINO1) = 106 GeV.

Expected CLs values for Fig. 14.

Observed CLs values for Fig. 14.

Observed cross-section limits for Fig. 14.

Expected CLs values for Fig. 15.

Observed CLs values for Fig. 15.

Observed cross-section limits for Fig. 15.

Expected CLs values for Fig. 16.

Observed CLs values for Fig. 16.

Observed cross-section limits for Fig. 14.

Expected CLs values for Fig. 17.

Observed CLs values for Fig. 17.

Observed cross-section limits for Fig. 17.

Expected CLs values for Fig. 19.

Observed CLs values for Fig. 19.

Observed cross-section limits for Fig. 19.

Number of generated events for Fig. 16.

Acceptance of S1 for Fig. 16.

Efficiency of S1 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S1 for Fig. 16.

Acceptance of S2 for Fig. 16.

Efficiency of S2 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S2 for Fig. 16.

Acceptance of S3 for Fig. 16.

Efficiency of S3 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S3 for Fig. 16.

Acceptance of S4 for Fig. 16.

Efficiency of S4 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S4 for Fig. 16.

Acceptance of S5 for Fig. 16.

Efficiency of S5 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S5 for Fig. 16.

Acceptance of S6 for Fig. 16.

Efficiency of S6 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S6 for Fig. 16.

Acceptance of S7 for Fig. 16.

Efficiency of S7 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S7 for Fig. 16.

Acceptance of H160 for Fig. 16.

Efficiency of H160 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in H160 for Fig. 16.

Observed cross-section limits for Fig. 20.

Observed cross-section limits for Fig. 20.

Expected cross-section limits for Fig. 20.

Total number of generated MC events for each point of the grid.

Observed upper limit on the signal cross-section, in pb, for each point of the grid in the different flavour channel.

Observed upper limit on the signal cross-section, in pb, for each point of the grid in the same flavour channel.

The best expected signal region chosen for each point of the grid in the different flavour channel.

The best expected signal region chosen for each point of the grid in the same flavour channel.

Observed CLs for each point of the grid in the different flavour channel.

Observed CLs for each point of the grid in the same flavour channel.

Expected CLs for each point of the grid in the different flavour channel.

Expected CLs for each point of the grid in the same flavour channel.

Signal acceptance for all the analysis cuts, except the BDTG cut, for each point of the grid in the different flavour channel.

Signal acceptance for all the analysis cuts, except the BDTG cut, for each point of the grid in the same flavour channel.

Signal efficiency, including the acceptance of the BDTG cut, for each point of the grid in the different flavour channel.

Signal efficiency, including the acceptance of the BDTG cut, for each point of the grid in the same flavour channel.

Total signal experimental systematic uncertainty for each point of the grid in the different flavour channel.

Signal efficiency, including the acceptance of the BDTG cut, for each point of the grid in the same flavour channel.

Number of simulated events passing various stages of the selection in the hadronic mT2 analysis for a signal sample with m(STOP1)=300 GeV, m(CHARGINO1) = 150 GeV and m(NEUTRALINO1) = 50 GeV, and with the top squark decaying as STOP1 --> CHARGINO1+ BOTTOM -> W(*)+NEUTRALINO1+ BOTTOM with unit probability. Event weights are applied to correct simulated events to data. "Isolation" includes the effects of tight ID for electrons and the isolation selection for both electrons and muons. "Cleaning cuts" refer to cuts applied to remove non-collision backgrounds and detector noise.

Number of simulated events passing various stages of the selection in the hadronic mT2 analysis for a signal sample with m(STOP1)=250 GeV, m(CHARGINO1) = 106 GeV and m(NEUTRALINO1) = 60 GeV, and with the top squark decaying as STOP1 --> CHARGINO1+ BOTTOM -> W(*)+NEUTRALINO1+ BOTTOM with unit probability. Event weights are applied to correct simulated events to data. "Isolation" includes the effects of tight ID for electrons and the isolation selection for both electrons and muons. "Cleaning cuts" refer to cuts applied to remove non-collision backgrounds and detector noise.

Number of simulated events passing various stages of the selection in the leptonic mT2 analysis for two signal samples with the top squark decaying as STOP1 --> CHARGINO1+ BOTTOM -> W(*)+NEUTRALINO1+BOTTOM with unit probability. Event weights are applied to correct simulated events to data. "Isolation" includes the effects of tight ID for electrons and the isolation selection for both electrons and muons. "Cleaning cuts" refer to cuts applied to remove non-collision backgrounds and detector noise.

Number of simulated events passing various stages of the selection in the leptonic mT2 analysis for a signal sample with m(STOP1)=180 GeV and m(NEUTRALINO1) = 60 GeV, and with the top squark decaying as STOP1 --> W + BOTTOM + NEUTRALINO1 with unit probability. Event weights are applied to correct simulated events to data. "Isolation" includes the effects of tight ID for electrons and the isolation selection for both electrons and muons. "Cleaning cuts" refer to cuts applied to remove non-collision backgrounds and detector noise.

Number of simulated events passing various stages of the selection in the in the MVA analysis for all signal samples used to train the BDTG and with the top squark decaying as STOP1 --> TOP + NEUTRALINO1 with unit probability. Event weights are applied to correct simulated events to data. "Isolation" includes the effects of tight ID for electrons and the isolation selection for both electrons and muons. "Cleaning cuts" refer to cuts applied to remove non-collision backgrounds and detector noise. The index i in category (Ci) is the one reported in table 3 for each signal point, SF and DF.

The second flow harmonic measured with the two-particle cumulants as a function of transverse momentum in the event activity bin of >80 GeV.

The second flow harmonic measured with the four-particle cumulants as a function of transverse momentum in the event activity bin of 25-40 GeV.

The second flow harmonic measured with the four-particle cumulants as a function of transverse momentum in the event activity bin of 40-55 GeV.

The second flow harmonic measured with the four-particle cumulants as a function of transverse momentum in the event activity bin of 55-80 GeV.

The second flow harmonic measured with the four-particle cumulants as a function of transverse momentum in the event activity bin of >80 GeV.

The second-order harmonic, v2, integrated over pT and eta, calculated with two-particle cumulants as a function of Sum ET^Pb.

The second-order harmonic, v2, integrated over pT and eta, calculated with four-particle cumulants as a function of Sum ET^Pb.

(1) Number of generated MC events for the spin 1/2 top partner signal grid (2) Relative Cross section uncertainties for the spin 1/2 top partner signal grid.

(1) Acceptance of the same flavour selection for the spin 1/2 top partner signal grid (2) Selection efficiency of the same flavour selection for the spin 1/2 top partner signal grid (3) Product of the acceptance and efficiency of the same flavour selection for the spin 1/2 top partner signal grid (4) Relative experimental uncertainties on the acceptance times efficiency of the same flavour selection for the spin 1/2 top partner signal grid.

(1) Acceptance of the different flavour selection for the spin 1/2 top partner signal grid (2) Selection efficiency of the different flavour selection for the spin 1/2 top partner signal grid (3) Product of the acceptance and efficiency of the different flavour selection for the spin 1/2 top partner signal grid (4) Relative experimental uncertainties on the acceptance times efficiency of the different flavour selection for the spin 1/2 top partner signal grid.

(1) Observed CLs values for the scalar top signal grid (2) Expected CLs values for the scalar top signal grid.

(1) Observed CLs values for the spin 1/2 top partner signal grid (2) Expected CLs values for the spin 1/2 top partner signal grid.

Cross section limits [pb] for the scalar top signal grid.

Cross section limits [pb] for the spin 1/2 top partner signal grid.

Observed 95% CL limit for stop grid as a function of the scalar top and neutralino masses.

Observed 95% CL limit for stop grid as a function of the scalar top and neutralino masses, varying signal cross section of +1sigma.

Observed 95% CL limit for stop grid as a function of the scalar top and neutralino masses, varying signal cross section of -1sigma.

Expected 95% CL limit for stop grid as a function of the scalar top and neutralino masses.

Expected 95% CL limit for stop grid as a function of the scalar top and neutralino masses, varying the uncertainty of +1sigma.

Expected 95% CL limit for stop grid as a function of the scalar top and neutralino masses, varying the uncertainty of -1sigma.

Observed 95% CL limit for top partner grid as a function of the top partner and neutralino masses.

Observed 95% CL limit for top partner grid as a function of the top partner and neutralino masses, varying signal cross section of +1sigma.

Observed 95% CL limit for top partner grid as a function of the top partner and neutralino masses, varying signal cross section of -1sigma.

Expected 95% CL limit for top partner grid as a function of the top partner and neutralino masses.

Expected 95% CL limit for top partner grid as a function of the top partner and neutralino masses, varying the uncertainty of +1sigma.

Expected 95% CL limit for top partner grid as a function of the top partner and neutralino masses, varying the uncertainty of -1sigma.

Expected and observed number of events with m_ll > 1300 GeV in the dielectron and dimuon channels. Yields given for different MS values correspond to the sum of signal and background events, with the signal obtained in the GRW formalism. All yields are normalized to the Z peak control region. The errors quoted originate from systematic uncertainties and limited MC statistics.

Expected and observed 95% C.L. lower limits on MS in the dielectron and dimuon channels, as well as for the combination of those channels without and with the diphoton channel in the GRW formalism. Separate results are provided for the different choices of flat priors.

Observed 95% C.L. lower limits on MS (in units of TeV), including systematic uncertainties, for ADD signal in the GRW, Hewett and HLZ formalisms with no K-factor applied to the signal. Separate results are provided for the different choices of flat priors.

Observed 95% C.L. lower limits on of TeV), including systematic uncertainties, for in the GRW, Hewett and HLZ formalisms with K-factors of 1.6 and 1.7 applied to the signal for the dilepton and diphoton channels, respectively. Separate results are provided for the different choices of flat priors.