Showing 10 of 13 results
The inclusive top-quark-pair production cross section $\sigma_{t\bar{t}}$ and its ratio to the $Z$-boson production cross section have been measured in proton--proton collisions at $\sqrt{s} = 13.6$ TeV, using 29 fb${}^{-1}$ of data collected in 2022 with the ATLAS experiment at the Large Hadron Collider. Using events with an opposite-charge electron-muon pair and $b$-tagged jets, and assuming Standard Model decays, the top-quark-pair production cross section is measured to be $\sigma_{t\bar{t}} = 850 \pm 3\mathrm{(stat.)}\pm 18\mathrm{(syst.)}\pm 20\mathrm{(lumi.)}$ pb. The ratio of the $t\bar{t}$ and the $Z$-boson production cross sections is also measured, where the $Z$-boson contribution is determined for inclusive $e^+e^-$ and $\mu^+\mu^-$ events in a fiducial phase space. The relative uncertainty on the ratio is reduced compared to the $t\bar{t}$ cross section, thanks to the cancellation of several systematic uncertainties. The result for the ratio, $R_{t\bar{t}/Z} = 1.145 \pm 0.003\mathrm{(stat.)}\pm 0.021\mathrm{(syst.)}\pm 0.002\mathrm{(lumi.)}$ is consistent with the Standard Model prediction using the PDF4LHC21 PDF set.
The fiducial phase-space definition for the $Z$-boson measurement. Born-level leptons are used.
The measured $t\bar{t}$ cross section and the ratio of the cross sections of $t\bar{t}$ and the $Z$-boson. Full phase-space is considered for $t\bar{t}$, while fiducial phase-space is considered for the $Z$-boson.
Table with pre-fit yields in the four regions used in the measurement
Table with post-fit yields in the four regions used in the measurement. The correlations of the nuisance parameters, as obtained by the fit, are considered for the calculation of the uncertainties.
Ratio of the $t\bar{t}$ to the $Z$-boson cross section compared to the predictions for several sets of parton distribution functions. The total cross section for $t\bar{t}$ production and the fiducial cross section for $Z$-boson production are used. The uncertainty on the prediction represents the PDF+$\alpha_{s}$ variations.
Nuisance parameter ranking plot for the $t\bar{t}$ signal-strength. Only the 10 most important nuisance parameters are shown. The impact of each nuisance parameter on the measured cross section, is defined as the shift induced in measured cross-section as the nuisance parameter is shifted by its pre-fit and post-fit uncertainties from its nominal best-fit value and then fixed while all other nuisance parameters profiled.
Nuisance parameter ranking plot for the ratio of the $t\bar{t}$ and $Z$-boson signal-strengths. Only the 10 most important nuisance parameters are shown. The impact of each nuisance parameter on the measured ratio, is defined as the shift induced in measured ratio as the nuisance parameter is shifted by its pre-fit and post-fit uncertainties from its nominal best-fit value and then fixed while all other nuisance parameters profiled.
Nuisance parameter ranking plot for the $Z$-boson signal-strength. Only the 10 most important nuisance parameters are shown. The impact of each nuisance parameter on the measured cross section, is defined as the shift induced in measured cross-section as the nuisance parameter is shifted by its pre-fit and post-fit uncertainties from its nominal best-fit value and then fixed while all other nuisance parameters profiled.
A measurement of single top-quark production in the s-channel is performed in proton$-$proton collisions at a centre-of-mass energy of 13 TeV with the ATLAS detector at the CERN Large Hadron Collider. The dataset corresponds to an integrated luminosity of 139 fb$^{-1}$. The analysis is performed on events with an electron or muon, missing transverse momentum and exactly two $b$-tagged jets in the final state. A discriminant based on matrix element calculations is used to separate single-top-quark s-channel events from the main background contributions, which are top-quark pair production and $W$-boson production in association with jets. The observed (expected) signal significance over the background-only hypothesis is 3.3 (3.9) standard deviations, and the measured cross-section is $\sigma=8.2^{+3.5}_{-2.9}$ pb, consistent with the Standard Model prediction of $\sigma^{\mathrm{SM}}=10.32^{+0.40}_{-0.36}$ pb.
Result of the s-channel single-top cross-section measurement, in pb. The statistical and systematic uncertainties are given, as well as the total uncertainty. The normalisation factors for the $t\bar{t}$ and $W$+jets backgrounds are also shown, with their total uncertainties.
Distribution of ${E}_{T}^{miss}$ after the fit of the multijet backgrounds, in the electron channel, in the signal region, without applying the cut on ${E}_{T}^{miss}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.
Distribution of ${E}_{T}^{miss}$ after the fit of the multijet backgrounds, in the electron channel, in the $W$+jets VR, without applying the cut on ${E}_{T}^{miss}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.
Distribution of ${E}_{T}^{miss}$ after the fit of the multijet backgrounds, in the electron channel, in the $t\bar{t}$ 3-jets VR, without applying the cut on ${E}_{T}^{miss}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.
Distribution of ${E}_{T}^{miss}$ after the fit of the multijet backgrounds, in the electron channel, in the $t\bar{t}$ 4-jets VR, without applying the cut on ${E}_{T}^{miss}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.
Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the signal region, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.
Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the $W$+jets VR, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.
Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the $t\bar{t}$ 3-jets VR, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.
Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the $t\bar{t}$ 4-jets VR, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.
Expected distributions of the MEM discriminant $P(S|X)$ in the SR, for the s-channel single-top signal, and for the $t\bar{t}$ and $W$+jets backgrounds, for MEM discriminant values larger than $2.0\times10^{-4}$. Each distribution is normalised to unity. The binning is the same as the optimised binning used in the signal extraction fit, resulting in a non-linear horizontal scale.
Distribution of the MEM discriminant $P(S|X)$ in the $W$+jets VR. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit presented in Section 5 in the paper. The uncertainty band indicates the simulation's statistical uncertainty and the normalisation uncertainties for the various processes in each bin, summed in quadrature. The ratio of the observed number to the predicted number of events in each bin is shown in the lower panel of the figure, with different vertical axis ranges. The binning is the same as the optimised binning used in the signal extraction fit described in Section 8 in the paper, resulting in a non-linear horizontal scale.
Distribution of the MEM discriminant $P(S|X)$ in the $t\bar{t}$ 3-jets VR. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit presented in Section 5 in the paper. The uncertainty band indicates the simulation's statistical uncertainty and the normalisation uncertainties for the various processes in each bin, summed in quadrature. The ratio of the observed number to the predicted number of events in each bin is shown in the lower panel of the figure, with different vertical axis ranges. The binning is the same as the optimised binning used in the signal extraction fit described in Section 8 in the paper, resulting in a non-linear horizontal scale.
Distribution of the MEM discriminant $P(S|X)$ in the $t\bar{t}$ 4-jets VR. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit presented in Section 5 in the paper. The uncertainty bands indicate the simulation's statistical uncertainty and the normalisation uncertainties for the various processes in each bin, summed in quadrature. The ratio of the observed number to the predicted number of events in each bin is shown in the lower panel of the figure, with different vertical axis ranges. The binning is the same as the optimised binning used in the signal extraction fit described in Section 8 in the paper, resulting in a non-linear horizontal scale.
Distribution of the MEM discriminant $P(S|X)$ in the SR before the fit to data, for MEM discriminant values larger than $2.0\times10^{-4}$. The lower panel of the figure shows the ratio of the data to the prediction, with different vertical axis ranges. The uncertainty band indicates the total uncertainties and their correlations in each bin. The uncertainties in the $t\bar{t}$ and $W$+jets normalisation factors, as well as in the s-channel signal cross-section, are not defined pre-fit and therefore not included. The binning is the same as the optimised binning used in the fit, resulting in a non-linear horizontal scale.
Distribution of the MEM discriminant $P(S|X)$ in the SR after the fit to data, for MEM discriminant values larger than $2.0\times10^{-4}$. The lower panel of the figure shows the ratio of the data to the prediction, with different vertical axis ranges. The uncertainty band indicates the total uncertainties and their correlations in each bin. The binning is the same as the optimised binning used in the fit, resulting in a non-linear horizontal scale.
Distribution of the MEM discriminant $P(S|X)$ in the SR after the fit to data, for MEM discriminant values larger than $2.0\times10^{-4}$, after subtraction of all backgrounds. The fitted distribution for the simulation of the signal is shown together with the post-fit uncertainty in the backgrounds. The binning is the same as the optimised binning used in the fit, resulting in a non-linear horizontal scale.
Pre-fit and post-fit event yields in the SR, for MEM discriminant values larger than $2.0\times10^{-4}$. The central value of the event yield for each process is calculated by summing the values of the discriminant bin contents, using the nominal expected yield for the pre-fit value, and the best-fit estimate for the post-fit value. The error includes statistical and systematic uncertainties summed in quadrature. All sources of systematic uncertainties are included, taking into account correlations and anti-correlations in the post-fit case. The uncertainties in the $t\bar{t}$ and $W$+jets normalisation factors, as well as in the s-channel signal cross-section, are not defined pre-fit and therefore only included in the post-fit uncertainties.
Observed impact of the different sources of uncertainty on the measured s-channel signal cross-section, grouped by categories. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. The 'Systematic uncertainties' category combines all sources of systematic uncertainties. The statistical uncertainty is obtained by repeating the fit after having fixed all nuisance parameters, including the $t\bar{t}$ and $W$+jets normalisation factors. 'Total' gives the total uncertainty on the measurement.
Observed impact of the different sources of $t\bar{t}$ modelling uncertainty on the measured s-channel signal cross-section. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, and 'ME/PS matching' to the matching of the ME to the parton shower.
Observed impact of the different sources of s-channel modelling uncertainty on the measured s-channel signal cross-section. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, as described in Section 7 in the paper.
Observed impact of the different sources of t-channel modelling uncertainty on the measured s-channel signal cross-section. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, as described in Section 7 in the paper.
Observed impact of the different sources of $tW$ modelling uncertainty on the measured s-channel signal cross-section, grouped by categories. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, and '$t\bar{t}$ overlap' to the algorithm removing the overlap between $tW$ and $t\bar{t}$ production at NLO, as described in Section 7 in the paper.
Observed impact of the different sources of PDF uncertainties on the measured s-channel signal cross-section, grouped by categories. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root.
Comparison between data and prediction after the fit to data in the signal region for the leading-jet $p_{T}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.
Comparison between data and prediction after the fit to data in the signal region for the leading-jet $\eta$. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.
Comparison between data and prediction after the fit to data in the signal region for the subleading-jet $p_{T}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.
Comparison between data and prediction after the fit to data in the signal region for the subleading-jet $\eta$. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.
Comparison between data and prediction after the fit to data in the signal region for the lepton $p_{T}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.
Comparison between data and prediction after the fit to data in the signal region for the lepton $\eta$. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.
Comparison between data and prediction after the fit to data in the signal region for the ${E}_{T}^{miss}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.
Comparison between data and prediction after the fit to data in the signal region for the $m_{T}^{W}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.
Nuisance parameters ranked according to their post-fit impacts on the best-fit value of the ratio $\mu$ of the measured cross-section to the predicted cross-section. In the figure, only the 20 nuisance parameters with the largest post-fit impacts are shown. The empty (solid) blue rectangles illustrate the pre-fit (post-fit) impact on $\mu$, corresponding to the upper axis. The pre-fit (post-fit) impact of each nuisance parameter, $\Delta\mu$, is calculated as the difference in the fitted value of $\mu$ between the nominal fit and the fit when fixing the corresponding nuisance parameter to $\hat{\theta}\pm\Delta\theta$ ($\hat{\theta}\pm\Delta\hat{\theta}$), where $\hat{\theta}$ is the best-fit value of the nuisance parameter and $\Delta\theta$ ($\Delta\hat{\theta}$) is its pre-fit (post-fit) uncertainty. Several systematic uncertainties are split into different nuisance parameters, which are indicated by NP. JES (JER) indicates jet energy scale (resolution), and $\gamma$ indicates a nuisance parameter associated to the MC statistics in one of the 18 bins numbered from 0 to 17. The black points show the best-fit values of the nuisance parameters, with the error bars representing the post-fit uncertainties. Each nuisance parameter is shown wrt. its nominal value, $\theta_0$, and in units of its pre-fit uncertainty, except the free-floating normalisation factors of the $t\bar{t}$ and $W$+jets backgrounds, and the parameters associated to the MC statistics in each bin, for which the post-fit values and uncertainties are shown.
Correlation matrix of the nuisance parameters and of the ratio $\mu$ of the measured cross-section to the predicted cross-section. The correlations are given after the fit to data. In the figure, only the parameters which have a correlation of at least 0.2 with any other parameter are shown.
Distribution of the MEM discriminant $P(S|X)$ in the SR for MEM discriminant values larger than $2.0\times10^{-4}$, for the collision data used for the measurement, and for 1000 pseudo-data replicas, generated using a bootstrapping technique, in order to assess the statistical correlations between this measurement and others, for the purpose of combinations. The replicas are obtained by reweighting each observed data event by a random integer generated according to Poisson statistics, using the <a href="https://zenodo.org/record/5361038">BootstrapGenerator</a> software package , which implements a technique described in <a href="https://cds.cern.ch/record/2759945/">ATL-PHYS-PUB-2021-011</a>. The ATLAS event number and run number of each event are used as seed to uniquely but reproducibly initialise the random number generator for each event. Each pseudo-data replica is assigned an index, ranging from 0 to 999, corresponding to the random number index used consistently for each observed data event.
Measured values of the signal cross-section and of the $t\bar{t}$ and $W$+jets normalisation factors, obtained by statistical-only fits to the collision data used for the measurement, and to 1000 pseudo-data replicas, generated using a bootstrapping technique, in order to assess the statistical correlations between this measurement and others, for the purpose of combinations. The central values and their statistical uncertainties are obtained by repeating the fit after having fixed all nuisance parameters, except the $t\bar{t}$ and $W$+jets normalisation factors, which are let free-floating (unlike for the statistical uncertainty on the cross-section quoted in the paper). The replicas are obtained by reweighting each observed data event by a random integer generated according to Poisson statistics, using the <a href="https://zenodo.org/record/5361038">BootstrapGenerator</a> software package , which implements a technique described in <a href="https://cds.cern.ch/record/2759945/">ATL-PHYS-PUB-2021-011</a>. The ATLAS event number and run number of each event are used as seed to uniquely but reproducibly initialise the random number generator for each event. Each pseudo-data replica is assigned an index, ranging from 0 to 999, corresponding to the random number index used consistently for each observed data event.
The associated production of a Higgs boson and a top-quark pair is measured in events characterised by the presence of one or two electrons or muons. The Higgs boson decay into a $b$-quark pair is used. The analysed data, corresponding to an integrated luminosity of 139 fb$^{-1}$, were collected in proton-proton collisions at the Large Hadron Collider between 2015 and 2018 at a centre-of-mass energy of $\sqrt{s}=13$ TeV. The measured signal strength, defined as the ratio of the measured signal yield to that predicted by the Standard Model, is $0.35^{+0.36}_{-0.34}$. This result is compatible with the Standard Model prediction and corresponds to an observed (expected) significance of 1.0 (2.7) standard deviations. The signal strength is also measured differentially in bins of the Higgs boson transverse momentum in the simplified template cross-section framework, including a bin for specially selected boosted Higgs bosons with transverse momentum above 300 GeV.
Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate prior to any fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate prior to any fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate prior to any fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate prior to any fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Performance of the Higgs boson reconstruction algorithms. For each row of `truth' ${\hat{p}_{{T}}^{H}}$, the matrix shows (in percentages) the fraction of all Higgs boson candidates with reconstructed $p_T^H$ in the various bins of the dilepton (left), single-lepton resolved (middle) and boosted (right) channels.
Performance of the Higgs boson reconstruction algorithms. For each row of `truth' ${\hat{p}_{{T}}^{H}}$, the matrix shows (in percentages) the fraction of all Higgs boson candidates with reconstructed $p_T^H$ in the various bins of the dilepton (left), single-lepton resolved (middle) and boosted (right) channels.
Pre-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except for the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor which is not defined pre-fit. The last bin includes the overflow.
Pre-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except for the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor which is not defined pre-fit. The last bin includes the overflow.
Pre-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except for the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor which is not defined pre-fit. The last bin includes the overflow.
Pre-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except for the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor which is not defined pre-fit. The last bin includes the overflow.
Pre-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except for the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor which is not defined pre-fit. The last bin includes the overflow.
Pre-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except for the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor which is not defined pre-fit. The last bin includes the overflow.
Comparison of predicted and observed event yields in each of the control and signal regions in the dilepton channel after the fit to the data. The uncertainty band includes all uncertainties and their correlations.
Comparison of predicted and observed event yields in each of the control and signal regions in the dilepton channel after the fit to the data. The uncertainty band includes all uncertainties and their correlations.
Comparison of predicted and observed event yields in each of the control and signal regions in the single-lepton channels after the fit to the data. The uncertainty band includes all uncertainties and their correlations.
Comparison of predicted and observed event yields in each of the control and signal regions in the single-lepton channels after the fit to the data. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $120\le p_T^H<200$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $120\le p_T^H<200$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $200\le p_T^H<300$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $200\le p_T^H<300$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $p_{{T}}^{H}\ge 300$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $p_{{T}}^{H}\ge 300$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $120\le p_T^H<200$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $120\le p_T^H<200$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $200\le p_T^H<300$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $200\le p_T^H<300$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $p_{{T}}^{H}\ge 450$ GeV (yield only). The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $p_{{T}}^{H}\ge 450$ GeV (yield only). The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton boosted SRs after the inclusive fit to the data for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton boosted SRs after the inclusive fit to the data for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton boosted SRs after the inclusive fit to the data for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton boosted SRs after the inclusive fit to the data for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for ${\Delta R^{{avg}}_{bb}}$ after the inclusive fit to the data in the single-lepton $CR^{5j}_{{\geq}4b\ lo}$ control region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for ${\Delta R^{{avg}}_{bb}}$ after the inclusive fit to the data in the single-lepton $CR^{5j}_{{\geq}4b\ lo}$ control region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for ${\Delta R^{{avg}}_{bb}}$ after the inclusive fit to the data in the single-lepton $CR^{5j}_{{\geq}4b\ hi}$ control region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for ${\Delta R^{{avg}}_{bb}}$ after the inclusive fit to the data in the single-lepton $CR^{5j}_{{\geq}4b\ hi}$ control region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Post-fit yields of signal ($S$) and total background ($B$) as a function of $\log (S/B)$, compared with data. Final-discriminant bins in all dilepton and single-lepton analysis regions are combined into bins of $\log (S/B)$, with the signal normalised to the SM prediction used for the computation of $\log (S/B)$. The signal is then shown normalised to the best-fit value and the SM prediction. The lower frame reports the ratio of data to background, and this is compared with the expected ${t\bar {t}H}$-signal-plus-background yield divided by the background-only yield for the best-fit signal strength (solid red line) and the SM prediction (dashed orange line).
Post-fit yields of signal ($S$) and total background ($B$) as a function of $\log (S/B)$, compared with data. Final-discriminant bins in all dilepton and single-lepton analysis regions are combined into bins of $\log (S/B)$, with the signal normalised to the SM prediction used for the computation of $\log (S/B)$. The signal is then shown normalised to the best-fit value and the SM prediction. The lower frame reports the ratio of data to background, and this is compared with the expected ${t\bar {t}H}$-signal-plus-background yield divided by the background-only yield for the best-fit signal strength (solid red line) and the SM prediction (dashed orange line).
Comparison between data and prediction for the reconstruction BDT score for the Higgs boson candidate identified using Higgs boson information, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the reconstruction BDT score for the Higgs boson candidate identified using Higgs boson information, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the average $\Delta \eta $ between $b$-tagged jets, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the average $\Delta \eta $ between $b$-tagged jets, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the likelihood discriminant, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the likelihood discriminant, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the average $\Delta R$ for all possible combinations of $b$-tagged jet pairs, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the average $\Delta R$ for all possible combinations of $b$-tagged jet pairs, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Post-fit distribution of the reconstructed Higgs boson candidate mass for the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Post-fit distribution of the reconstructed Higgs boson candidate mass for the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Post-fit distribution of the reconstructed Higgs boson candidate mass for the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Post-fit distribution of the reconstructed Higgs boson candidate mass for the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Post-fit distribution of the reconstructed Higgs boson candidate mass for the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Post-fit distribution of the reconstructed Higgs boson candidate mass for the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Fitted values of the ${t\bar {t}H}$ signal strength parameter in the individual channels and in the inclusive signal-strength measurement.
Fitted values of the ${t\bar {t}H}$ signal strength parameter in the individual channels and in the inclusive signal-strength measurement.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the fit. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the fit. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Pre-fit distribution of the number of jets in the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the Standard Model expectation. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor that is not defined pre-fit.
Pre-fit distribution of the number of jets in the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the Standard Model expectation. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor that is not defined pre-fit.
Pre-fit distribution of the number of jets in the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the Standard Model expectation. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor that is not defined pre-fit.
Pre-fit distribution of the number of jets in the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the Standard Model expectation. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor that is not defined pre-fit.
Pre-fit distribution of the number of jets in the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the Standard Model expectation. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor that is not defined pre-fit.
Pre-fit distribution of the number of jets in the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the Standard Model expectation. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor that is not defined pre-fit.
Post-fit distribution of the number of jets in the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Post-fit distribution of the number of jets in the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Post-fit distribution of the number of jets in the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Post-fit distribution of the number of jets in the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Post-fit distribution of the number of jets in the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Post-fit distribution of the number of jets in the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Post-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The last bin includes the overflow.
Post-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The last bin includes the overflow.
Post-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The last bin includes the overflow.
Post-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The last bin includes the overflow.
Post-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The last bin includes the overflow.
Post-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The last bin includes the overflow.
Signal-strength measurements in the individual STXS ${\hat{p}_{{T}}^{H}}$ bins, as well as the inclusive signal strength.
Signal-strength measurements in the individual STXS ${\hat{p}_{{T}}^{H}}$ bins, as well as the inclusive signal strength.
95% CL simplified template cross-section upper limits in the individual STXS ${\hat{p}_{{T}}^{H}}$ bins, as well as the inclusive limit. The observed limits are shown (solid black lines), together with the expected limits both in the background-only hypothesis (dotted black lines) and in the SM hypothesis (dotted red lines). In the case of the expected limits in the background-only hypothesis, one- and two-standard-deviation uncertainty bands are also shown. The hatched uncertainty bands correspond to the theory uncertainty in the fiducial cross-section prediction in each bin.
95% CL simplified template cross-section upper limits in the individual STXS ${\hat{p}_{{T}}^{H}}$ bins, as well as the inclusive limit. The observed limits are shown (solid black lines), together with the expected limits both in the background-only hypothesis (dotted black lines) and in the SM hypothesis (dotted red lines). In the case of the expected limits in the background-only hypothesis, one- and two-standard-deviation uncertainty bands are also shown. The hatched uncertainty bands correspond to the theory uncertainty in the fiducial cross-section prediction in each bin.
The ratios $S/B$ (black solid line, referring to the vertical axis on the left) and $S/\sqrt{B}$ (red dashed line, referring to the vertical axis on the right) for each category in the inclusive analysis in the dilepton channel (left) and in the single-lepton channels (right), where $S$ ($B$) is the number of selected signal (background) events predicted by the simulation and normalised to a luminosity of 139 fb$^{-1}$ .
The ratios $S/B$ (black solid line, referring to the vertical axis on the left) and $S/\sqrt{B}$ (red dashed line, referring to the vertical axis on the right) for each category in the inclusive analysis in the dilepton channel (left) and in the single-lepton channels (right), where $S$ ($B$) is the number of selected signal (background) events predicted by the simulation and normalised to a luminosity of 139 fb$^{-1}$ .
Comparison between data and prediction for the $\Delta R$ between the Higgs candidate and the ${t\bar {t}}$ candidate system, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the $\Delta R$ between the Higgs candidate and the ${t\bar {t}}$ candidate system, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the number of $b$-tagged jet pairs with an invariant mass within 30 GeV of 125 GeV, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the number of $b$-tagged jet pairs with an invariant mass within 30 GeV of 125 GeV, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the reconstruction BDT score for the Higgs boson candidate identified using Higgs boson information, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the reconstruction BDT score for the Higgs boson candidate identified using Higgs boson information, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the $\Delta R$ between the two highest ${p_{{T}}}$ $b$-tagged jets, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the $\Delta R$ between the two highest ${p_{{T}}}$ $b$-tagged jets, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the sum of $b$-tagging discriminants of jets from Higgs, hadronic top and leptonic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the sum of $b$-tagging discriminants of jets from Higgs, hadronic top and leptonic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the sum of $b$-tagging discriminants of jets from Higgs, hadronic top and leptonic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the sum of $b$-tagging discriminants of jets from Higgs, hadronic top and leptonic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the hadronic top candidate invariant mass, after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the hadronic top candidate invariant mass, after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the hadronic top candidate invariant mass, after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the hadronic top candidate invariant mass, after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the fraction of the sum of $b$-tagging discriminants of all jets not associated to the Higgs or hadronic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the fraction of the sum of $b$-tagging discriminants of all jets not associated to the Higgs or hadronic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the fraction of the sum of $b$-tagging discriminants of all jets not associated to the Higgs or hadronic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the fraction of the sum of $b$-tagging discriminants of all jets not associated to the Higgs or hadronic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $0\le {\hat{p}_{{T}}^{H}}<120$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $0\le {\hat{p}_{{T}}^{H}}<120$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $120\le {\hat{p}_{{T}}^{H}}<200$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $120\le {\hat{p}_{{T}}^{H}}<200$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $200\le {\hat{p}_{{T}}^{H}}<300$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $200\le {\hat{p}_{{T}}^{H}}<300$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $300\le {\hat{p}_{{T}}^{H}}<450$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $300\le {\hat{p}_{{T}}^{H}}<450$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for ${\hat{p}_{{T}}^{H}}\ge 450$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for ${\hat{p}_{{T}}^{H}}\ge 450$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
95% confidence level upper limits on signal-strength measurements in the individual STXS ${\hat{p}_{{T}}^{H}}$ bins, as well as the inclusive signal-strength limit, after the fit used to extract multiple signal-strength parameters. The observed limits are shown (solid black lines), together with the expected limits both in the background-only hypothesis (dotted black lines) and in the SM hypothesis (dotted red lines). In the case of the expected limits in the background-only hypothesis, one- and two-standard-deviation uncertainty bands are also shown.
95% confidence level upper limits on signal-strength measurements in the individual STXS ${\hat{p}_{{T}}^{H}}$ bins, as well as the inclusive signal-strength limit, after the fit used to extract multiple signal-strength parameters. The observed limits are shown (solid black lines), together with the expected limits both in the background-only hypothesis (dotted black lines) and in the SM hypothesis (dotted red lines). In the case of the expected limits in the background-only hypothesis, one- and two-standard-deviation uncertainty bands are also shown.
Post-fit correlation matrix (in percentages) between the $\mu $ values obtained in the STXS bins.
Post-fit correlation matrix (in percentages) between the $\mu $ values obtained in the STXS bins.
Performance of the Higgs boson reconstruction algorithms. For each row of `truth' ${\hat{p}_{{T}}^{H}}$, the matrix shows (in percentages) the fraction of Higgs boson candidates which are truth-matched to ${b\bar {b}}$ decays, with reconstructed $p_T^H$ in the various bins of the dilepton (left), single lepton resolved (middle) and boosted (right) channels.
Performance of the Higgs boson reconstruction algorithms. For each row of `truth' ${\hat{p}_{{T}}^{H}}$, the matrix shows (in percentages) the fraction of Higgs boson candidates which are truth-matched to ${b\bar {b}}$ decays, with reconstructed $p_T^H$ in the various bins of the dilepton (left), single lepton resolved (middle) and boosted (right) channels.
Pre-fit event yields in the dilepton signal regions and control regions. All uncertainties are included except the $k({t\bar {t}+{\geq }1b})$ uncertainty that is not defined pre-fit. For the ${t\bar {t}H}$ signal, the pre-fit yield values correspond to the theoretical prediction and corresponding uncertainties. `Other sources' refers to s-channel, t-channel, $tW$, $tWZ$, $tZq$, $Z+$ jets and diboson events.
Pre-fit event yields in the dilepton signal regions and control regions. All uncertainties are included except the $k({t\bar {t}+{\geq }1b})$ uncertainty that is not defined pre-fit. For the ${t\bar {t}H}$ signal, the pre-fit yield values correspond to the theoretical prediction and corresponding uncertainties. `Other sources' refers to s-channel, t-channel, $tW$, $tWZ$, $tZq$, $Z+$ jets and diboson events.
Post-fit event yields in the dilepton signal regions and control regions, after the inclusive fit in all channels. All uncertainties are included, taking into account correlations. For the ${t\bar {t}H}$ signal, the post-fit yield and uncertainties correspond to those in the inclusive signal-strength measurement. `Other sources' refers to s-channel, t-channel, $tW$, $tWZ$, $tZq$, $Z+$ jets and diboson events.
Post-fit event yields in the dilepton signal regions and control regions, after the inclusive fit in all channels. All uncertainties are included, taking into account correlations. For the ${t\bar {t}H}$ signal, the post-fit yield and uncertainties correspond to those in the inclusive signal-strength measurement. `Other sources' refers to s-channel, t-channel, $tW$, $tWZ$, $tZq$, $Z+$ jets and diboson events.
Pre-fit event yields in the single-lepton resolved and boosted signal regions and control regions. All uncertainties are included except the $k({t\bar {t}+{\geq }1b})$ uncertainty that is not defined pre-fit. For the ${t\bar {t}H}$ signal, the pre-fit yield values correspond to the theoretical prediction and corresponding uncertainties. `Other top sources' refers to s-channel, t-channel, $tWZ$ and $tZq$ events.
Pre-fit event yields in the single-lepton resolved and boosted signal regions and control regions. All uncertainties are included except the $k({t\bar {t}+{\geq }1b})$ uncertainty that is not defined pre-fit. For the ${t\bar {t}H}$ signal, the pre-fit yield values correspond to the theoretical prediction and corresponding uncertainties. `Other top sources' refers to s-channel, t-channel, $tWZ$ and $tZq$ events.
Post-fit event yields in the single-lepton resolved and boosted signal regions and control regions, after the inclusive fit in all channels. All uncertainties are included, taking into account correlations. For the ${t\bar {t}H}$ signal, the post-fit yield and uncertainties correspond to those in the inclusive signal-strength measurement. `Other top sources' refers to s-channel, t-channel, $tWZ$ and $tZq$ events.
Post-fit event yields in the single-lepton resolved and boosted signal regions and control regions, after the inclusive fit in all channels. All uncertainties are included, taking into account correlations. For the ${t\bar {t}H}$ signal, the post-fit yield and uncertainties correspond to those in the inclusive signal-strength measurement. `Other top sources' refers to s-channel, t-channel, $tWZ$ and $tZq$ events.
Breakdown of the contributions to the uncertainties in $\mu$. The contributions from the different sources of uncertainty are evaluated after the fit. The $\Delta \mu $ values are obtained by repeating the fit after having fixed a certain set of nuisance parameters corresponding to a group of systematic uncertainties, and then evaluating $(\Delta \mu)^2$ by subtracting the resulting squared uncertainty of $\mu $ from its squared uncertainty found in the full fit. The same procedure is followed when quoting the effect of the ${t\bar {t}+{\geq }1b}$ normalisation. The total uncertainty is different from the sum in quadrature of the different components due to correlations between nuisance parameters existing in the fit.
Breakdown of the contributions to the uncertainties in $\mu$. The contributions from the different sources of uncertainty are evaluated after the fit. The $\Delta \mu $ values are obtained by repeating the fit after having fixed a certain set of nuisance parameters corresponding to a group of systematic uncertainties, and then evaluating $(\Delta \mu)^2$ by subtracting the resulting squared uncertainty of $\mu $ from its squared uncertainty found in the full fit. The same procedure is followed when quoting the effect of the ${t\bar {t}+{\geq }1b}$ normalisation. The total uncertainty is different from the sum in quadrature of the different components due to correlations between nuisance parameters existing in the fit.
Fraction (in percentages) of signal events, after SR and CR selections, originating from $b\bar {b}$, $WW$ and other remaining Higgs boson decay modes in the dilepton channel.
Fraction (in percentages) of signal events, after SR and CR selections, originating from $b\bar {b}$, $WW$ and other remaining Higgs boson decay modes in the dilepton channel.
Fraction (in percentages) of signal events, after SR and CR selections, originating from $b\bar {b}$, $WW$ and other remaining Higgs boson decay modes in the single-lepton channels.
Fraction (in percentages) of signal events, after SR and CR selections, originating from $b\bar {b}$, $WW$ and other remaining Higgs boson decay modes in the single-lepton channels.
Predicted SM ${t\bar {t}H}$ cross-section in each of the five STXS ${\hat{p}_{{T}}^{H}}$ bins and signal acceptance times efficiency (including all event selection criteria) in each STXS bin as well as for the inclusive ${\hat{p}_{{T}}^{H}}$ range.
Predicted SM ${t\bar {t}H}$ cross-section in each of the five STXS ${\hat{p}_{{T}}^{H}}$ bins and signal acceptance times efficiency (including all event selection criteria) in each STXS bin as well as for the inclusive ${\hat{p}_{{T}}^{H}}$ range.
Number of expected signal events before the fit, after each selection requirement applied to enter the dilepton channel $SR^{\geq 4j}_{\geq 4b}$ region. All ${t\bar {t}H}$ signal events are included, regardless of the $H$ or ${t\bar {t}H}$ decay mode. All object corrections are applied, except for the initial number of events which is calculated using the NLO QCD+EW theoretical prediction. All quoted numbers are rounded to unity. More details on the selection criteria can be found in the text.
Number of expected signal events before the fit, after each selection requirement applied to enter the dilepton channel $SR^{\geq 4j}_{\geq 4b}$ region. All ${t\bar {t}H}$ signal events are included, regardless of the $H$ or ${t\bar {t}H}$ decay mode. All object corrections are applied, except for the initial number of events which is calculated using the NLO QCD+EW theoretical prediction. All quoted numbers are rounded to unity. More details on the selection criteria can be found in the text.
Number of expected signal events before the fit, after each selection requirement applied to enter the single-lepton channel resolved $SR^{\geq 6j}_{\geq 4b}$ region. All ${t\bar {t}H}$ signal events are included, regardless of the $H$ or ${t\bar {t}H}$ decay mode. All object corrections are applied, except for the initial number of events which is calculated using the NLO QCD+EW theoretical prediction. All quoted numbers are rounded to unity. More details on the selection criteria can be found in the text.
Number of expected signal events before the fit, after each selection requirement applied to enter the single-lepton channel resolved $SR^{\geq 6j}_{\geq 4b}$ region. All ${t\bar {t}H}$ signal events are included, regardless of the $H$ or ${t\bar {t}H}$ decay mode. All object corrections are applied, except for the initial number of events which is calculated using the NLO QCD+EW theoretical prediction. All quoted numbers are rounded to unity. More details on the selection criteria can be found in the text.
Number of expected signal events before the fit, after each selection requirement applied to enter the single-lepton channel boosted $SR_{boosted}$ region. All ${t\bar {t}H}$ signal events are included, regardless of the $H$ or ${t\bar {t}H}$ decay mode. All object corrections are applied, except for the initial number of events which is calculated using the NLO QCD+EW theoretical prediction. All quoted numbers are rounded to unity. More details on the selection criteria can be found in the text.
Number of expected signal events before the fit, after each selection requirement applied to enter the single-lepton channel boosted $SR_{boosted}$ region. All ${t\bar {t}H}$ signal events are included, regardless of the $H$ or ${t\bar {t}H}$ decay mode. All object corrections are applied, except for the initial number of events which is calculated using the NLO QCD+EW theoretical prediction. All quoted numbers are rounded to unity. More details on the selection criteria can be found in the text.
This paper describes a search for beyond the Standard Model decays of the Higgs boson into a pair of new spin-0 particles subsequently decaying into $b$-quark pairs, $H \rightarrow aa \rightarrow (b\bar{b})(b\bar{b})$, using proton-proton collision data collected by the ATLAS detector at the Large Hadron Collider at center-of-mass energy $\sqrt{s}=13$ TeV. This search focuses on the regime where the decay products are collimated and in the range $15 \leq m_a \leq 30$ GeV and is complementary to a previous search in the same final state targeting the regime where the decay products are well separated and in the range $20 \leq m_a \leq 60$ GeV. A novel strategy for the identification of the $a \rightarrow b\bar{b}$ decays is deployed to enhance the efficiency for topologies with small separation angles. The search is performed with 36 fb$^{-1}$ of integrated luminosity collected in 2015 and 2016 and sets upper limits on the production cross-section of $H \rightarrow aa \rightarrow (b\bar{b})(b\bar{b})$, where the Higgs boson is produced in association with a $Z$ boson.
Summary of the 95% CL upper limits on $\sigma_{ZH} BR(H\rightarrow aa \rightarrow (b\bar{b})(b\bar{b}))$. Both observed and expected limits are listed. In the case of the expected limits, one- and two-standard-deviation uncertainty bands are also listed.
Summary of the 95% CL upper limits on $\sigma_{ZH} BR(H\rightarrow aa \rightarrow (b\bar{b})(b\bar{b}))$. Both observed and expected limits are listed. In the case of the expected limits, one- and two-standard-deviation uncertainty bands are also listed.
Summary of the 95% C.L. upper limits on $\sigma_{ZH} BR(H\rightarrow aa \rightarrow (b\bar{b})(b\bar{b}))$ for the dilepton channel in the resolved analysis. The observed limits are shown, together with the expected limits (dotted black lines). In the case of the expected limits, one- and two-standard-deviation uncertainty bands are also displayed. The data was published in JHEP 10 (2018) 031.
Summary of the observed 95% CL upper limits on $\sigma_{ZH} BR(H\rightarrow aa \rightarrow (b\bar{b})(b\bar{b}))$ for the resolved analysis.
Efficiency and acceptance for simulated $ZH(\rightarrow aa\rightarrow (b\bar{b})(b\bar{b}))$ samples in two signal regions (SR) of the analysis, one with two $a\to b\bar{b}$ candidates in the High Purity Category (HPC), and the other with one $a\to b\bar{b}$ candidate in the High Purity Category (HPC) and one in the Low Purity Category (LPC).
Efficiency and acceptance for simulated $ZH(\rightarrow aa\rightarrow (b\bar{b})(b\bar{b}))$ samples in two signal regions (SR) of the analysis, one with two $a\to b\bar{b}$ candidates in the High Purity Category (HPC), and the other with one $a\to b\bar{b}$ candidate in the High Purity Category (HPC) and one in the Low Purity Category (LPC).
Event yields for a simulated $ZH(\rightarrow aa\rightarrow (b\bar{b})(b\bar{b}))$ sample with $m_a = 17.5\,\text{GeV}$. The signal sample is produced with cross section equals to the standard model $pp\to ZH$, i.e. $0.88\,\text{pb}$. Cut 0 corresponds to the initial number of events. Cut 1 requires the single lepton trigger. Cut 2 requires 2 identified leptons. Cut 3 requires the Z-boson mass window. Cut 4 requires 2 reconstructed $a\to b\bar{b}$ candidates. Cut 5a requires 2 identified $a\to b\bar{b}$ candidates in the 1HPC1LPC region. Cut 6a requires the 2 $a\to b\bar{b}$ candidates in the 1HPC1LPC region to be inside the Higgs mass window. Cut 5b requires 2 identified $a\to b\bar{b}$ candidates in the 2HPC region. Cut 6b requires the 2 $a\to b\bar{b}$ candidates in the 2HPC region to be inside the Higgs mass window.
Event yields for a simulated $ZH(\rightarrow aa\rightarrow (b\bar{b})(b\bar{b}))$ sample with $m_a = 17.5\,\text{GeV}$. The signal sample is produced with cross section equals to the standard model $pp\to ZH$, i.e. $0.88\,\text{pb}$. Cut 0 corresponds to the initial number of events. Cut 1 requires the single lepton trigger. Cut 2 requires 2 identified leptons. Cut 3 requires the Z-boson mass window. Cut 4 requires 2 reconstructed $a\to b\bar{b}$ candidates. Cut 5a requires 2 identified $a\to b\bar{b}$ candidates in the 1HPC1LPC region. Cut 6a requires the 2 $a\to b\bar{b}$ candidates in the 1HPC1LPC region to be inside the Higgs mass window. Cut 5b requires 2 identified $a\to b\bar{b}$ candidates in the 2HPC region. Cut 6b requires the 2 $a\to b\bar{b}$ candidates in the 2HPC region to be inside the Higgs mass window.
Background yield table for Z+jets, $t\bar{t}$, and rare sources. Observed data yield. Signal $ZH(\rightarrow aa\rightarrow (b\bar{b})(b\bar{b}))$ yield with $m_a = 20\,\text{GeV}$. The signal sample is produced with cross section equals to the standard model $pp\to ZH$, i.e. $0.88\,\text{pb}$. The table includes the yields in two signal regions with leptons consistent with an on-shell Z-boson decay, one with 2 $a\to b\bar{b}$ candidates in the 2HPC region and one with 2 $a\to b\bar{b}$ candidates in the 1HPC1LPC region. The table also includes the yields in four control regions, one with leptons consistent with an on-shell Z-boson decay and 2 $a\to b\bar{b}$ candidates in the Low Purity Category (LPC), and three others where the leptons are not consistent an on-shell Z-boson decay.
Background yield table for Z+jets, $t\bar{t}$, and rare sources. Observed data yield. Signal $ZH(\rightarrow aa\rightarrow (b\bar{b})(b\bar{b}))$ yield with $m_a = 20\,\text{GeV}$. The signal sample is produced with cross section equals to the standard model $pp\to ZH$, i.e. $0.88\,\text{pb}$, with a branching ratio set to 1 for the $H \rightarrow aa$ decay, whereas the ATLAS figure attached to this entry instead uses the upper-limit branching ratio (smaller than 1). The table includes the yields in two signal regions with leptons consistent with an on-shell Z-boson decay, one with 2 $a\to b\bar{b}$ candidates in the 2HPC region and one with 2 $a\to b\bar{b}$ candidates in the 1HPC1LPC region. The table also includes the yields in four control regions, one with leptons consistent with an on-shell Z-boson decay and 2 $a\to b\bar{b}$ candidates in the Low Purity Category (LPC), and three others where the leptons are not consistent an on-shell Z-boson decay.
A search for heavy neutral Higgs bosons is performed using the LHC Run 2 data, corresponding to an integrated luminosity of 139 fb$^{-1}$ of proton-proton collisions at $\sqrt{s}=13$ TeV recorded with the ATLAS detector. The search for heavy resonances is performed over the mass range 0.2-2.5 TeV for the $\tau^+\tau^-$ decay with at least one $\tau$-lepton decaying into final states with hadrons. The data are in good agreement with the background prediction of the Standard Model. In the $M_{h}^{125}$ scenario of the Minimal Supersymmetric Standard Model, values of $\tan\beta>8$ and $\tan\beta>21$ are excluded at the 95% confidence level for neutral Higgs boson masses of 1.0 TeV and 1.5 TeV, respectively, where $\tan\beta$ is the ratio of the vacuum expectation values of the two Higgs doublets.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits with one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
A search for supersymmetric partners of top quarks decaying as $\tilde{t}_1\to c\tilde\chi^0_1$ and supersymmetric partners of charm quarks decaying as $\tilde{c}_1\to c\tilde\chi^0_1$, where $\tilde\chi^0_1$ is the lightest neutralino, is presented. The search uses 36.1 ${\rm fb}^{-1}$ $pp$ collision data at a centre-of-mass energy of 13 TeV collected by the ATLAS experiment at the Large Hadron Collider and is performed in final states with jets identified as containing charm hadrons. Assuming a 100% branching ratio to $c\tilde\chi^0_1$, top and charm squarks with masses up to 850 GeV are excluded at 95% confidence level for a massless lightest neutralino. For $m_{\tilde{t}_1,\tilde{c}_1}-m_{\tilde\chi^0_1}
Acceptance for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR1 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for the best expected SR in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR1 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR2 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR1 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR2 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR3 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR2 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR3 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR4 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR3 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR4 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR5 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR4 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR5 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for the best expected SR in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR5 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for the best expected SR in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Minimum branching ratio excluded at 95% CL, assuming no sensitivity for other decay possibilities, in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Minimum branching ratio excluded at 95% CL, assuming no sensitivity for other decay possibilities, in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Minimum branching ratio excluded at 95% CL, assuming no sensitivity for other decay possibilities, in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
The signal region with the best expected CLS value for each signal in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
The signal region with the best expected CLS value for each signal in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
The signal region with the best expected CLS value for each signal in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR1. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR1. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR1. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR2. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR2. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR2. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR3. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR3. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR3. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR4. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR4. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR4. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR5. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR5. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR5. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (450,425)$ GeV signal point for signal region SR1.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (450,425)$ GeV signal point for signal region SR1.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (450,425)$ GeV signal point for signal region SR1.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,420)$ GeV signal point for signal region SR2.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,420)$ GeV signal point for signal region SR2.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,420)$ GeV signal point for signal region SR2.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,350)$ GeV signal point for signal region SR3.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,350)$ GeV signal point for signal region SR3.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,350)$ GeV signal point for signal region SR3.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (600,350)$ GeV signal point for signal region SR4.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (600,350)$ GeV signal point for signal region SR4.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (600,350)$ GeV signal point for signal region SR4.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (900,1)$ GeV signal point for signal region SR5.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (900,1)$ GeV signal point for signal region SR5.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (900,1)$ GeV signal point for signal region SR5.
A search for heavy neutral Higgs bosons and $Z^{\prime}$ bosons is performed using a data sample corresponding to an integrated luminosity of 36.1 fb$^{-1}$ from proton-proton collisions at $\sqrt{s}$ = 13 TeV recorded by the ATLAS detector at the LHC during 2015 and 2016. The heavy resonance is assumed to decay to $\tau^+\tau^-$ with at least one tau lepton decaying to final states with hadrons and a neutrino. The search is performed in the mass range of 0.2-2.25 TeV for Higgs bosons and 0.2-4.0 TeV for $Z^{\prime}$ bosons. The data are in good agreement with the background predicted by the Standard Model. The results are interpreted in benchmark scenarios. In the context of the hMSSM scenario, the data exclude $\tan\beta > 1.0$ for $m_A$ = 0.25 TeV and $\tan\beta > 42$ for $m_A$ = 1.5 TeV at the 95% confidence level. For the Sequential Standard Model, $Z^{\prime}_\mathrm{SSM}$ with $m_{Z^{\prime}} < 2.42$ TeV is excluded at 95% confidence level, while $Z^{\prime}_\mathrm{NU}$ with $m_{Z^{\prime}} < 2.25$ TeV is excluded for the non-universal $G(221)$ model that exhibits enhanced couplings to third-generation fermions.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Despite listing this as an exclusive final state (as there must be no b-jets), there is no explicit selection on the presence of additional light-flavour jets. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. In the paper, the first bin is cut off at 60 GeV for aesthetics but contains underflows down to 50 GeV as in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 300, 500 and 800 GeV and $\tan\beta$ = 10 in the hMSSM scenario are also provided.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Despite listing this as an exclusive final state (as there must be at least one b-jets), there is no explicit selection on the presence of additional light-flavour jets. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. In the paper, the first bin is cut off at 60 GeV for aesthetics but contains underflows down to 50 GeV as in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 300, 500 and 800 GeV and $\tan\beta$ = 10 in the hMSSM scenario are also provided.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Despite listing this as an exclusive final state (as there must be no b-jets), there is no explicit selection on the presence of additional light-flavour jets. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 300, 500 and 800 GeV and $\tan\beta$ = 10 in the hMSSM scenario are also provided.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Despite listing this as an exclusive final state (as there must be at least one b-jets), there is no explicit selection on the presence of additional light-flavour jets. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 300, 500 and 800 GeV and $\tan\beta$ = 10 in the hMSSM scenario are also provided.
Observed and predicted mTtot distribution for the b-inclusive selection in the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. In the paper, the first bin is cut off at 60 GeV for aesthetics but contains underflows down to 50 GeV as in the HepData table. The last bin includes overflows. The prediction for a SSM Zprime with masses of 1500, 2000 and 2500 GeV are also provided.
Observed and predicted mTtot distribution for the b-inclusive selection in the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The prediction for a SSM Zprime with masses of 1500, 2000 and 2500 GeV are also provided.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the Drell Yan production cross section times ditau branching fraction as a function of the Zprime boson mass.
Observed and expected 95% CL upper limits on the Higgs boson production cross section times ditau branching fraction as a function of the boson mass and the relative strength of the b-associated production.
Ratio of the 95% CL upper limits on the production cross section times branching fraction for alternate Zprime models with respect to the SSM, both observed and expected are shown.
Acceptance, acceptance times efficiency and b-tag category fraction for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance, acceptance times efficiency and b-tag category fraction for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance and acceptance times efficiency for a heavy gauge boson produced by Drell Yan as a function of the gauge boson mass.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
A search for heavy long-lived charged $R$-hadrons is reported using a data sample corresponding to 3.2$^{-1}$ of proton--proton collisions at $\sqrt{s} = 13$ TeV collected by the ATLAS experiment at the Large Hadron Collider at CERN. The search is based on observables related to large ionisation losses and slow propagation velocities, which are signatures of heavy charged particles travelling significantly slower than the speed of light. No significant deviations from the expected background are observed. Upper limits at 95% confidence level are provided on the production cross section of long-lived $R$-hadrons in the mass range from 600 GeV to 2000 GeV and gluino, bottom and top squark masses are excluded up to 1580 GeV, 805 GeV and 890 GeV, respectively.
Distributions of beta for data and simulation after a Zmumu selection. The values given for the mean and width are taken from Gaussian functions matched to data and simulation.
Data (black dots) and background estimates (red solid line) for m_beta for the gluino R-hadron search (1000 GeV). The green shaded band illustrates the statistical uncertainty of the background estimate. The blue dashed lines illustrate the expected signal (on top of background) for the given R-hadron mass hypothesis. The black dashed vertical lines at 500 GeV show the mass selection and the last bin includes all entries/masses above.
Data (black dots) and background estimates (red solid line) for m_betagamma for the gluino R-hadron search (1000 GeV). The green shaded band illustrates the statistical uncertainty of the background estimate. The blue dashed lines illustrate the expected signal (on top of background) for the given R-hadron mass hypothesis. The black dashed vertical lines at 500 GeV show the mass selection and the last bin includes all entries/masses above.
Data (bold boxes) and background estimates (colour fill) for m_beta vs. m_betagamma for the gluino R-hadron search (1000 GeV). The blue thin-line boxes illustrate the expected signal (on top of background) for the given R-hadron mass hypothesis. The black dashed vertical/horizontal lines at 500 GeV show the mass selection (signal region in the top-right). Two events pass this selection.
Expected (dashed black line) and observed (solid red line) 95% CL upper limits on the cross section as a function of mass for the production of long-lived gluino R-hadrons. The theory prediction along with its +-1sigma uncertainty is show as a black line and a blue band, respectively. The observed 8 TeV Run-1 limit and theory prediction [arXiv:1411.6795] are shown in dash-dotted and dotted lines, respectively.
Expected (dashed black line) and observed (solid red line) 95% CL upper limits on the cross section as a function of mass for the production of bottom-squark R-hadrons. The theory prediction along with its +-1sigma uncertainty is show as a black line and a blue band, respectively. The observed 8 TeV Run-1 limit and theory prediction [arXiv:1411.6795] are shown in dash-dotted and dotted lines, respectively.
Expected (dashed black line) and observed (solid red line) 95% CL upper limits on the cross section as a function of mass for the production of top-squark R-hadrons. The theory prediction along with its +-1sigma uncertainty is show as a black line and a blue band, respectively. The observed 8 TeV Run-1 limit and theory prediction [arXiv:1411.6795] are shown in dash-dotted and dotted lines, respectively.
Final selection requirements as a function of the simulated R-hadron mass.
Summary of all studied systematic uncertainties. Ranges indicate a dependency on the R-hadron mass hypothesis (from low to high masses).
Expected signal yield (Nsig) and efficiency (eff.), estimated background (Nbkg) and observed number of events in data (Nobs) for the full mass range after the final selection using 3.2/fb of data. The stated uncertainties include both the statistical and systematic contribution.
Distribution of the truth-level beta for gluino R-hadrons in exemplary signal MC samples and muons in a Zmumu MC sample. All distributions have been normalised to one. The last bin contains the overflow of the histograms. The distributions illustrate the good discriminating power of the variables.
Distribution of the truth-level betagamma for gluino R-hadrons in exemplary signal MC samples and muons in a Zmumu MC sample. All distributions have been normalised to one. The last bin contains the overflow of the histograms. The distributions illustrate the good discriminating power of the variables.
Expected (dashed black line) and observed (solid red line) 95% confidence level upper limits on the cross section as a function of mass for the production of long-lived gluino R-hadrons. The theory prediction along with its +-1sigma uncertainty is show as a black line and a blue band, respectively. For meta-stable gluinos with a lifetime of 50 ns. (mass exclusion: about 1660 GeV expected, 1520 GeV observed).
Expected (dashed black line) and observed (solid red line) 95% confidence level upper limits on the cross section as a function of mass for the production of long-lived gluino R-hadrons. The theory prediction along with its +-1sigma uncertainty is show as a black line and a blue band, respectively. For meta-stable gluinos with a lifetime of 30 ns. (mass exclusion: about 1660 GeV expected, 1520 GeV observed).
Expected (dashed black line) and observed (solid red line) 95% confidence level upper limits on the cross section as a function of mass for the production of long-lived gluino R-hadrons. The theory prediction along with its +-1sigma uncertainty is show as a black line and a blue band, respectively. For meta-stable gluinos with a lifetime of 10 ns. (mass exclusion: about 1660 GeV expected, 1520 GeV observed).
Object-quality selection cut-flow with observed data and exemplary expected events (scaled to 3.2/fb for MC) in the gluino R-hadron search.
Object-quality selection cut-flow with observed data and exemplary expected events (scaled to 3.2/fb for MC) in the squark R-hadron search.
Expected signal yield (Nsig) and efficiency (eff.), estimated background (Nbkg) and observed number of events in data (Nobs) for the full mass range in the meta-stable gluino R-hadron search using 3.2/fb of data. The stated uncertainties include both the statistical and systematic contribution.
The results of a search for the stop, the supersymmetric partner of the top quark, in final states with one isolated electron or muon, jets, and missing transverse momentum are reported. The search uses the 2015 LHC $pp$ collision data at a center-of-mass energy of $\sqrt{s}=13$ TeV recorded by the ATLAS detector and corresponding to an integrated luminosity of 3.2 fb${}^{-1}$. The analysis targets two types of signal models: gluino-mediated pair production of stops with a nearly mass-degenerate stop and neutralino; and direct pair production of stops, decaying to the top quark and the lightest neutralino. The experimental signature in both signal scenarios is similar to that of a top quark pair produced in association with large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits on gluino and stop masses are set at 95% confidence level. The results extend the LHC Run-1 exclusion limit on the gluino mass up to 1460 GeV in the gluino-mediated scenario in the high gluino and low stop mass region, and add an excluded stop mass region from 745 to 780 GeV for the direct stop model with a massless lightest neutralino. The results are also reinterpreted to set exclusion limits in a model of vector-like top quarks.
Comparison of data with estimated backgrounds in the $am_\text{T2}$ distribution with the STCR1 event selection except for the requirement on $am_\text{T2}$. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of data with estimated backgrounds in the $b$-tagged jet multiplicity with the STCR1 event selection except for the requirement on the $b$-tagged jet multiplicity. Furthermore, the $\Delta R(b_1,b_2)$ requirement is dropped. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of data with estimated backgrounds in the $\Delta R(b_1,b_2)$ distribution with the STCR1 event selection except for the requirement on $\Delta R(b_1,b_2)$. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of data with estimated backgrounds in the $\tilde{E}_\text{T}^\text{miss}$ distribution with the TZCR1 event selection except for the requirement on $\tilde{E}_\text{T}^\text{miss}$. The variables $\tilde{E}_\text{T}^\text{miss}$ and $\tilde{m}_\text{T}$ are constructed in the same way as $E_\text{T}^\text{miss}$ and $m_\text{T}$ but treating the leading photon transverse momentum as invisible. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of data with estimated backgrounds in the $\tilde{m}_\text{T}$ distribution with the TZCR1 event selection except for the requirement on $\tilde{m}_\text{T}$. The variables $\tilde{E}_\text{T}^\text{miss}$ and $\tilde{m}_\text{T}$ are constructed in the same way as $E_\text{T}^\text{miss}$ and $m_\text{T}$ but treating the leading photon transverse momentum as invisible. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of the observed data ($n_\text{obs}$) with the predicted background ($n_\text{exp}$) in the validation and signal regions. The background predictions are obtained using the background-only fit configuration. The bottom panel shows the significance of the difference between data and predicted background, where the significance is based on the total uncertainty ($\sigma_\text{tot}$).
Jet multiplicity distributions for events where exactly two signal leptons are selected. No correction factors are included in the background normalizations. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Jet multiplicity distributions for events where exactly one lepton plus one $\tau$ candidate are selected. No correction factors are included in the background normalizations. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
The $E_\text{T}^\text{miss}$ distribution in SR1. In the plot, the full event selection in the corresponding signal region is applied, except for the requirement on $E_\text{T}^\text{miss}$. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin contains the overflow. Benchmark signal models are overlaid for comparison. The benchmark models are specified by the gluino and stop masses, given in TeV in the table.
The $m_\text{T}$ distribution in SR1. In the plot, the full event selection in the corresponding signal region is applied, except for the requirement on $m_\text{T}$. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin contains the overflow. Benchmark signal models are overlaid for comparison. The benchmark models are specified by the gluino and stop masses, given in TeV in the table.
Expected (black dashed) 95% excluded regions in the plane of $m_{\tilde{g}}$ versus $m_{\tilde{t}_1}$ for gluino-mediated stop production.
Observed (red solid) 95% excluded regions in the plane of $m_{\tilde{g}}$ versus $m_{\tilde{t}_1}$ for gluino-mediated stop production.
Expected (black dashed) 95% excluded regions in the plane of $m_{\tilde{t}_1}$ versus $m_{\tilde{\chi}_1^0}$ for direct stop production.
Observed (red solid) 95% excluded regions in the plane of $m_{\tilde{t}_1}$ versus $m_{\tilde{\chi}_1^0}$ for direct stop production.
The expected upper limits on $T$ quark pair production times the squared branching ratio for $T \rightarrow tZ$ as a function of the $T$ quark mass.
The observed upper limits on $T$ quark pair production times the squared branching ratio for $T \rightarrow tZ$ as a function of the $T$ quark mass.
The expected limits on $T$ quarks as a function of the branching ratios $B\left(T \rightarrow bW\right)$ and $B\left(T \rightarrow tH\right)$ for a $T$ quark with a mass of 800 GeV. The $T$ is assumed to decay in three possible ways: $T \to tZ$, $T \to tH$, and $T \to bW$.
The observed limits on $T$ quarks as a function of the branching ratios $B\left(T \rightarrow bW\right)$ and $B\left(T \rightarrow tH\right)$ for a $T$ quark with a mass of 800 GeV. The $T$ is assumed to decay in three possible ways: $T \to tZ$, $T \to tH$, and $T \to bW$.
The $m_\text{T}$ distribution in the WVR2-tail validation region which has the same preselection and jet $p_\text{T}$ requirements as SR2.
The $am_\text{T2}$ distribution in the WVR2-tail validation region which has the same preselection and jet $p_\text{T}$ requirements as SR2.
Large-radius jet mass ($R=1.2$), decomposed into the number of small-radius jet constituents. The lower panel shows the ratio of the total data to the total prediction (summed over all jet multiplicities). Events are required to have one lepton, four jets with $p_\text{T}>80,50,40,40$ GeV, at least one $b$-tagged jet, $E_\text{T}^\text{miss}>200$ GeV, and $m_\text{T}>30$ GeV.
Distribution of $m_\text{T2}^\tau$ in data for a selection enriched in $t\bar{t}$ events with one hadronically decaying $\tau$. Events that have no hadronic $\tau$ candidate (that passes the Loose identification criteria, as well as other requirements) are not shown in the plot.
Upper limits on the model cross-section in units of pb for the gluino-mediated stop models.
Upper limits on the model cross-section in units of pb for the models with direct stop pair production.
Illustration of the best expected signal region per signal grid point for the gluino-mediated stop models. This mapping is used for the final combined exclusion limits.
Illustration of the best expected signal region per signal grid point for models with direct stop pair production. This mapping is used for the final combined exclusion limits.
Expected $CL_s$ values for the gluino-mediated stop models.
Observed $CL_s$ values for the gluino-mediated stop models.
Expected $CL_s$ values for the direct stop pair production models.
Observed $CL_s$ values for the direct stop pair production models.
Expected limit using SR1 for models with direct stop pair production and an unpolarized stop (and bino LSP).
Expected limit using SR1 for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Expected limit using SR1 for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Observed limit using SR1 for models with direct stop pair production and an unpolarized stop (and bino LSP).
Observed limit using SR1 for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Observed limit using SR1 for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Expected limit using SR2 for models with direct stop pair production and an unpolarized stop (and bino LSP).
Expected limit using SR2 for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Expected limit using SR2 for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Observed limit using SR2 for models with direct stop pair production and an unpolarized stop (and bino LSP).
Observed limit using SR2 for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Observed limit using SR2 for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Expected limit using SR1+SR2 (best expected) for models with direct stop pair production and an unpolarized stop (and bino LSP).
Expected limit using SR1+SR2 (best expected) for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Expected limit using SR1+SR2 (best expected) for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Observed limit using SR1+SR2 (best expected) for models with direct stop pair production and an unpolarized stop (and bino LSP).
Observed limit using SR1+SR2 (best expected) for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Observed limit using SR1+SR2 (best expected) for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Acceptance for SR1 in the gluino-mediated stop models. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR1 in the direct stop pair production. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR2 in the gluino-mediated stop models. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR2 in the direct stop pair production. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR3 in the gluino-mediated stop models. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR3 in the direct stop pair production. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Efficiency for SR1 in the gluino-mediated stop models. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR1 in the direct stop pair production. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR2 in the gluino-mediated stop models. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR2 in the direct stop pair production. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR3 in the gluino-mediated stop models. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR3 in the direct stop pair production. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
A search for Supersymmetry involving the pair production of gluinos decaying via third-generation squarks to the lightest neutralino is reported. It uses an LHC proton--proton dataset at a center-of-mass energy $\sqrt{s} = 13$ TeV with an integrated luminosity of 3.2 fb$^{-1}$ collected with the ATLAS detector in 2015. The signal is searched for in events containing several energetic jets, of which at least three must be identified as $b$-jets, large missing transverse momentum and, potentially, isolated electrons or muons. Large-radius jets with a high mass are also used to identify highly boosted top quarks. No excess is found above the predicted background. For neutralino masses below approximately 700 GeV, gluino masses of less than 1.78 TeV and 1.76 TeV are excluded at the 95% CL in simplified models of the pair production of gluinos decaying via sbottom and stop, respectively. These results significantly extend the exclusion limits obtained with the $\sqrt{s} = 8$ TeV dataset.
Distribution of missing transverse energy for SR-Gbb-B.
Distribution of missing transverse energy for SR-Gtt-0L-C.
Distribution of missing transverse energy for SR-Gtt-1L-A.
Expected 95% CL exclusion contour for the Gbb signal.
Observed 95% CL exclusion contour for the Gbb signal.
Expected 95% CL exclusion contour for the Gtt combination.
Observed 95% CL exclusion contour for the Gtt combination.
Acceptances for the Gbb model in SR-Gbb-A. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gbb model in SR-Gbb-B. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gbb model in SR-Gbb-C. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-0L-A. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-0L-B. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-0L-C. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-1L-A. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-1L-B. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptance times efficiency for the Gbb model in SR-Gbb-A.
Acceptance times efficiency for the Gbb model in SR-Gbb-B.
Acceptance times efficiency for the Gbb model in SR-Gbb-C.
Acceptance times efficiency for the Gtt model in SR-Gtt-0L-A.
Acceptance times efficiency for the Gtt model in SR-Gtt-0L-B.
Acceptance times efficiency for the Gtt model in SR-Gtt-0L-C.
Acceptance times efficiency for the Gtt model in SR-Gtt-1L-A.
Acceptance times efficiency for the Gtt model in SR-Gtt-1L-B.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gbb model in SR-Gbb-A.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gbb model in SR-Gbb-B.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gbb model in SR-Gbb-C.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-0L-A.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-0L-B.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-0L-C.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-1L-A.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-1L-B.
Signal region yielding the best expected sensitivity for each point of the parameter space in the Gbb model.
Signal region yielding the best expected sensitivity for each point of the parameter space in the Gtt model for the 0-lepton channel.
Signal region yielding the best expected sensitivity for each point of the parameter space in the Gtt model for the 1-lepton channel.
Combination of two 0-lepton and 1-lepton signal regions yielding the best expected sensitivity for each point of the parameter space in the Gtt model.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But sometimes you may wish to be more specific. Here we show you how.
Guidance on the query string syntax can also be found in the OpenSearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.