Distribution of the reconstructed $\tau\tau$ invariant mass ($m_{\tau\tau}$) for all events in the VBF_1 signal region for $p_{\text{T}}^{H}>200$ GeV. The observed Higgs boson signal corresponds to $(\sigma\times B)/(\sigma\times B)_{\text{SM}}\,=\,0.99$. Entries with values above the $x$-axis range are shown in the last bin of each distribution. The prediction for each sample is determined from the likelihood fit performed to measure the total $pp\rightarrow H\rightarrow\tau\tau$ cross-section.

Distribution of the reconstructed $\tau\tau$ invariant mass ($m_{\tau\tau}$) for all events in the VBF_0 signal region for $m_{jj}<1$ TeV. The observed Higgs boson signal corresponds to $(\sigma\times B)/(\sigma\times B)_{\text{SM}}\,=\,0.99$. Entries with values above the $x$-axis range are shown in the last bin of each distribution. The prediction for each sample is determined from the likelihood fit performed to measure the total $pp\rightarrow H\rightarrow \tau\tau$ cross-section.

Distribution of the reconstructed $\tau\tau$ invariant mass ($m_{\tau\tau}$) for all events in the VBF_0 signal region for $m_{jj}>1$ TeV. The observed Higgs boson signal corresponds to $(\sigma\times B)/(\sigma\times B)_{\text{SM}}\,=\,0.99$. Entries with values above the $x$-axis range are shown in the last bin of each distribution. The prediction for each sample is determined from the likelihood fit performed to measure the total $pp\rightarrow H \rightarrow \tau\tau$ cross-section.

Distribution of the reconstructed $\tau\tau$ invariant mass ($m_{\tau\tau}$) for all events in the VBF_1 signal region for $m_{jj}<1$ TeV. The observed Higgs boson signal corresponds to $(\sigma\times B)/(\sigma\times B)_{\text{SM}}\,=\,0.99$. Entries with values above the $x$-axis range are shown in the last bin of each distribution. The prediction for each sample is determined from the likelihood fit performed to measure the total $pp\rightarrow \rightarrow \tau\tau$ cross-section.

Distribution of the reconstructed $\tau\tau$ invariant mass ($m_{\tau\tau}$) for all events in the VBF_1 signal region for $m_{jj}>1$ TeV. The observed Higgs boson signal corresponds to $(\sigma\times B)/(\sigma\times B)_{\text{SM}}\,=\,0.99$. Entries with values above the $x$-axis range are shown in the last bin of each distribution. The prediction for each sample is determined from the likelihood fit performed to measure the total $pp\rightarrow H\rightarrow \tau\tau$ cross-section.

Comparison of the observed and expected event yields in the ttH categories. The window category contains events with $m_{\tau\tau} \in [100, 150]$ GeV, while events outside of this mass region are included in the sideband region. The observed Higgs boson signal corresponds to $(\sigma\times B)/(\sigma\times B)_{\text{SM}}\,=\,0.99$. The prediction for each sample is determined from the likelihood fit performed to measure the total $pp\rightarrow H\rightarrow\tau\tau$ cross-section.

The measured values of $\sigma_{H}\times B(H\rightarrow\tau\tau)$ relative to the SM expectations in the total (labelled as 'Combined') and per-production-mode fit. The total $\pm1\sigma$ uncertainty in each measurement is indicated by the error bar. The total systematic uncertainty in each measurement is also indicated.

The measured values for $\sigma_{H}\times B(H\rightarrow\tau\tau)$ relative to the SM expectations in the simplified template cross-section measurement. The total $\pm1\sigma$ uncertainty in each measurement is indicated by the error bar. The total systematic uncertainty in each measurement is also indicated.

Upper limits at 95% CL on simplified template cross-sections in the individual ttH $p_{\text{T}}^{H}$ bins relative to their SM expectation in the $H\rightarrow\tau\tau$ decay channel, derived using the CL$_\text{s}$ method. The observed upper limits, together with the expected limits both in the background-only hypothesis and in the SM hypothesis (dotted red lines) are included. In the case of the expected limits in the background-only hypothesis, one- and two-standard-deviation uncertainty bands are also shown.

Measured fiducial differential cross-sections as a function of $p_\text{T}(j_0)$. The measurements are compared with particle-level SM predictions from the POWHEG+PYTHIA8, POWHEG+HERWIG7 and MadGraph5_aMC@NLO+Pythia8 generators for the combined VBF, ggF, $VH$, and $t\bar{t}H$ Higgs boson production modes. The shaded box around each data point shows the statistical uncertainty, while the total uncertainty is indicated by the error bar. The contribution from the ggF, $VH$, and $t\bar{t}H$ production modes as predicted by POWHEG+PYTHIA8 is also shown.

Measured fiducial differential cross-sections as a function of $p_\text{T}^{H}$. The measurements are compared with particle-level SM predictions from the POWHEG+PYTHIA8, POWHEG+HERWIG7 and MadGraph5_aMC@NLO+Pythia8 generators for the combined VBF, ggF, $VH$, and $t\bar{t} H$ Higgs boson production modes. The shaded box around each data point shows the statistical uncertainty, while the total uncertainty is indicated by the error bar. The contribution from the ggF, $VH$, and $t\bar{t} H$ production modes as predicted by POWHEG+PYTHIA8 is also shown.

Measured fiducial differential cross-sections as a function of $\Delta\phi_{jj}^{\text{signed}}$. The measurements are compared with particle-level SM predictions from the POWHEG+PYTHIA8, POWHEG+HERWIG7 and MadGraph5_aMC@NLO+Pythia8 generators for the combined VBF, ggF, $VH$, and $t\bar{t}H$ Higgs boson production modes. The shaded box around each data point shows the statistical uncertainty, while the total uncertainty is indicated by the error bar. The contribution from the ggF, $VH$, and $t\bar{t} H$ production modes as predicted by POWHEG+PYTHIA8 is also shown.

Measured fiducial differential cross-sections as a function of $\Delta\phi_{jj}^{\text{signed}}$ vs $p_\text{T}^\text{H}$. The measurements are compared with particle-level SM predictions from the POWHEG+PYTHIA8, POWHEG+HERWIG7 and MadGraph5_aMC@NLO+Pythia8 generators for the combined VBF, ggF, $VH$, and $t\bar{t}H$ Higgs boson production modes. The shaded box around each data point shows the statistical uncertainty, while the total uncertainty is indicated by the error bar. The contribution from the ggF, $VH$, and $t\bar{t}H$ production modes as predicted by POWHEG+PYTHIA8 is also shown.

The unfolded data compared with the nominal SM predictions from POWHEG+PYTHIA8, as well as the predictions for several values of Wilson coefficients in the SMEFT, for $\Delta\phi_{jj}^{\text{signed}}$.

The unfolded data compared with the nominal SM predictions from POWHEG+PYTHIA8, as well as the predictions for several values of Wilson coefficients in the SMEFT, for $\Delta\phi_{jj}^{\text{signed}}$.

The unfolded data compared with the nominal SM predictions from POWHEG+PYTHIA8, as well as the predictions for several values of Wilson coefficients in the SMEFT, for $\Delta\phi_{jj}^{\text{signed}}$ vs $p_\text{T}^{H}$.

The unfolded data compared with the nominal SM predictions from POWHEG+PYTHIA8, as well as the predictions for several values of Wilson coefficients in the SMEFT, for $p_\text{T}^{H}$.

The 95% expected and observed confidence intervals for each of the six considered Wilson coefficients. Each coefficient is treated individually and both the linear and linear + quadratic models are considered when evaluating the sensitivity to the terms that enter at $\mathcal{O}(\Lambda^{-4})$. For the CP-even operators the $\Delta\phi_{jj}^{\text{signed}}$ distribution is used to extract the confidence interval. The limits are computed at a new-physics scale $\Lambda=1$ TeV.

The 95% expected and observed confidence intervals for each of the six considered Wilson coefficients. Each coefficient is treated individually and both the linear and linear + quadratic models are considered when evaluating the sensitivity to the terms that enter at $\mathcal{O}(\Lambda^{-4})$. For the CP-odd operators the $\Delta\phi_{jj}^{\text{signed}}$ vs $p_\text{T}^{H}$ distribution is used to extract the confidence interval. The limits are computed at a new-physics scale $\Lambda=1$ TeV.

Two-dimensional observed and expected limits at 68% and 95% confidence level obtained from $c_{HW}$ and $c_{HB}$ using only the SM-dimension-6 interference in the SMEFT basis. The limits are computed at a new-physics scale $\Lambda$ = 1 TeV. In this case, the $\Delta\phi_{jj}^{signed}$ distribution is used. IMPORTANT: HEPData requires the same number of rows for each column. However, each curve of on the plot has a different number of points. For that reason, the curves are padded with data of "0.0, 0.0". The "0.0, 0.0" points should be omitted in analysis.

Two-dimensional observed and expected limits at 68% and 95% confidence level obtained from $c_{H\tilde{W}}$ and $c_{H\tilde{B}}$ using only the SM-dimension-6 interference in the SMEFT basis. The limits are computed at a new-physics scale $\Lambda$ = 1 TeV. In this purely CP-odd case, the $\Delta\phi_{jj}^{signed}$ vs $p_{T}^{H}$ distribution is used. IMPORTANT: HEPData requires the same number of rows for each column. However, each curve of on the plot has a different number of points. For that reason, the curves are padded with data of "0.0, 0.0". The "0.0, 0.0" points should be omitted in analysis.

Two-dimensional observed and expected limits at 68% and 95% confidence level obtained from $c_{HW}$ and $c_{H\tilde{W}}$ using only the SM-dimension-6 interference in the SMEFT basis. The limits are computed at a new-physics scale $\Lambda$ = 1 TeV. In this case, the $\Delta\phi_{jj}^{signed}$ distribution is used. IMPORTANT: HEPData requires the same number of rows for each column. However, each curve of on the plot has a different number of points. For that reason, the curves are padded with data of "0.0, 0.0". The "0.0, 0.0" points should be omitted in analysis.

The expected values of $\sigma_{H}\times B(H\rightarrow\tau\tau)$ relative to the SM expectations in the total (labelled as 'Combined') and per-production-mode fit. The total $\pm1\sigma$ uncertainty in each measurement is indicated by the error bar. The total systematic uncertainty in each measurement is also indicated.

The expected values for $\sigma_{H}\times B(H\rightarrow\tau\tau)$ relative to the SM expectations in the simplified template cross-section measurement. The total $\pm1\sigma$ uncertainty in each measurement is indicated by the error bar. The total systematic uncertainty in each measurement is also indicated.

The measured values for $\sigma_{H}\times B(H\rightarrow\tau\tau)$ in the simplified template cross-section measurement. The total $\pm1\sigma$ uncertainty in the measurement is indicated by the black error bars, with the individual contribution from the statistical uncertainty in blue.

The measured correlations between differential fiducial cross-sections, $\sigma$, and the normalisation factors, $\alpha$, for the $Z(\to\tau\tau) + \text{jets}$ and top backgrounds for $p_\text{T}(j_0)$. The bins denoted as $\sigma_{1,2,3,4}$ correspond to the measurements in the four bins listed elsewhere for each observable.

The measured correlations between differential fiducial cross-sections, $\sigma$, and the normalisation factors, $\alpha$, for the $Z(\to\tau\tau) + \text{jets}$ and top backgrounds for $p_\text{T}^{H}}$. The bins denoted as $\sigma_{1,2,3,4}$ correspond to the measurements in the four bins listed elsewhere for each observable.

The measured correlations between differential fiducial cross-sections, $\sigma$, and the normalisation factors, $\alpha$, for the $Z(\to\tau\tau) + \text{jets}$ and top backgrounds for $\Delta\phi_{jj}^{\text{signed}}$. The bins denoted as $\sigma_{1,2,3,4}$ correspond to the measurements in the four bins listed elsewhere for each observable.

The measured correlations between differential fiducial cross-sections, $\sigma$, and the normalisation factors, $\alpha$, for the $Z(\to\tau\tau) + \text{jets}$ and top backgrounds for $\Delta\phi_{jj}^{\text{signed}}$ vs $p_\text{T}^{H}$. The bins denoted as $\sigma_{1,2,3,4}$ correspond to the measurements in the four bins listed elsewhere for each observable.

The figure shows the post-fit distribution of events as a function of $H_{\mathrm{T}}^{\ell,j} = \sum_{\ell,j} p_{T}^{\ell,j}$, scalar sum of $p_T$ for all jets and leptons in the $\ell+$jets channel, in proton-lead (p+Pb) collisions at a center-of-mass energy of $\sqrt{s_{\mathrm{NN}}} = 8.16$ TeV, with an integrated luminosity of 165 nb$^{-1}$. The data correspond to the $1\ell 1b$ $\mu$+jets channel in a pre-fit configuration. The stacked histograms represent different processes contributing to the event yield, including top quark pair production ($t\bar{t}$), single top, $W$ boson production with $b$, $c$, and light quarks, $Z$ boson production with $b$, $c$, and light quarks, diboson, and fake lepton backgrounds.

The figure shows the pre-fit distribution of events as a function of $H_{\mathrm{T}}^{\ell,j} = \sum_{\ell,j} p_{T}^{\ell,j}$, scalar sum of $p_T$ for all jets and leptons in the $\ell+$jets channel, in proton-lead (p+Pb) collisions at a center-of-mass energy of $\sqrt{s_{\mathrm{NN}}} = 8.16$ TeV, with an integrated luminosity of 165 nb$^{-1}$. The data correspond to the $1\ell 2bincl$ $e$+jets channel in a pre-fit configuration. The stacked histograms represent different processes contributing to the event yield, including top quark pair production ($t\bar{t}$), single top, $W$ boson production with $b$, $c$, and light quarks, $Z$ boson production with $b$, $c$, and light quarks, diboson, and fake lepton backgrounds.

The figure shows the post-fit distribution of events as a function of $H_{\mathrm{T}}^{\ell,j} = \sum_{\ell,j} p_{T}^{\ell,j}$, scalar sum of $p_T$ for all jets and leptons in the $\ell+$jets channel, in proton-lead (p+Pb) collisions at a center-of-mass energy of $\sqrt{s_{\mathrm{NN}}} = 8.16$ TeV, with an integrated luminosity of 165 nb$^{-1}$. The data correspond to the $1\ell 2bincl$ $e$+jets channel in a pre-fit configuration. The stacked histograms represent different processes contributing to the event yield, including top quark pair production ($t\bar{t}$), single top, $W$ boson production with $b$, $c$, and light quarks, $Z$ boson production with $b$, $c$, and light quarks, diboson, and fake lepton backgrounds.

The figure shows the pre-fit distribution of events as a function of $H_{\mathrm{T}}^{\ell,j} = \sum_{\ell,j} p_{T}^{\ell,j}$, scalar sum of $p_T$ for all jets and leptons in the $\ell+$jets channel, in proton-lead (p+Pb) collisions at a center-of-mass energy of $\sqrt{s_{\mathrm{NN}}} = 8.16$ TeV, with an integrated luminosity of 165 nb$^{-1}$. The data correspond to the $1\ell 2bincl$ $\mu$+jets channel in a pre-fit configuration. The stacked histograms represent different processes contributing to the event yield, including top quark pair production ($t\bar{t}$), single top, $W$ boson production with $b$, $c$, and light quarks, $Z$ boson production with $b$, $c$, and light quarks, diboson, and fake lepton backgrounds.

The figure shows the post-fit distribution of events as a function of $H_{\mathrm{T}}^{\ell,j} = \sum_{\ell,j} p_{T}^{\ell,j}$, scalar sum of $p_T$ for all jets and leptons in the $\ell+$jets channel, in proton-lead (p+Pb) collisions at a center-of-mass energy of $\sqrt{s_{\mathrm{NN}}} = 8.16$ TeV, with an integrated luminosity of 165 nb$^{-1}$. The data correspond to the $1\ell 2bincl$ $\mu$+jets channel in a pre-fit configuration. The stacked histograms represent different processes contributing to the event yield, including top quark pair production ($t\bar{t}$), single top, $W$ boson production with $b$, $c$, and light quarks, $Z$ boson production with $b$, $c$, and light quarks, diboson, and fake lepton backgrounds.

The figure shows the pre-fit distribution of events as a function of $H_{\mathrm{T}}^{\ell,j} = \sum_{\ell,j} p_{T}^{\ell,j}$, scalar sum of $p_T$ for all jets and leptons in the $\ell+$jets channel, in proton-lead (p+Pb) collisions at a center-of-mass energy of $\sqrt{s_{\mathrm{NN}}} = 8.16$ TeV, with an integrated luminosity of 165 nb\(^{-1}\) in the 2\(\ell\)1b signal region. The histogram represents the number of events per GeV, with the data points shown as black dots and their associated uncertainties. The stacked colored histograms indicate different processes: \(t\bar{t}\) (red), single top (orange), \(Z+b\) (dark blue), \(Z+c\) (medium blue), \(Z+\)light (light blue), diboson (gray), and fake lepton (purple). The hatched area represents the uncertainty in the predictions.

The figure shows the post-fit distribution of events as a function of $H_{\mathrm{T}}^{\ell,j} = \sum_{\ell,j} p_{T}^{\ell,j}$, scalar sum of $p_T$ for all jets and leptons in the $\ell+$jets channel, in proton-lead (p+Pb) collisions at a center-of-mass energy of $\sqrt{s_{\mathrm{NN}}} = 8.16$ TeV, with an integrated luminosity of 165 nb\(^{-1}\) in the 2\(\ell\)1b signal region. The histogram represents the number of events per GeV, with the data points shown as black dots and their associated uncertainties. The stacked colored histograms indicate different processes: \(t\bar{t}\) (red), single top (orange), \(Z+b\) (dark blue), \(Z+c\) (medium blue), \(Z+\)light (light blue), diboson (gray), and fake lepton (purple). The hatched area represents the uncertainty in the predictions.

The figure shows the pre-fit distribution of events as a function of $H_{\mathrm{T}}^{\ell,j} = \sum_{\ell,j} p_{T}^{\ell,j}$, scalar sum of $p_T$ for all jets and leptons in the $\ell+$jets channel, in proton-lead (p+Pb) collisions at a center-of-mass energy of $\sqrt{s_{\mathrm{NN}}} = 8.16$ TeV, with an integrated luminosity of 165 nb\(^{-1}\) in the 2\(\ell\)2bincl signal region. The histogram represents the number of events per GeV, with the data points shown as black dots and their associated uncertainties. The stacked colored histograms indicate different processes: \(t\bar{t}\) (red), single top (orange), \(Z+b\) (dark blue), \(Z+c\) (medium blue), \(Z+\)light (light blue), diboson (gray), and fake lepton (purple). The hatched area represents the uncertainty in the predictions.

The figure shows the post-fit distribution of events as a function of $H_{\mathrm{T}}^{\ell,j} = \sum_{\ell,j} p_{T}^{\ell,j}$, scalar sum of $p_T$ for all jets and leptons in the $\ell+$jets channel, in proton-lead (p+Pb) collisions at a center-of-mass energy of $\sqrt{s_{\mathrm{NN}}} = 8.16$ TeV, with an integrated luminosity of 165 nb\(^{-1}\) in the 2\(\ell\)2bincl signal region. The histogram represents the number of events per GeV, with the data points shown as black dots and their associated uncertainties. The stacked colored histograms indicate different processes: \(t\bar{t}\) (red), single top (orange), \(Z+b\) (dark blue), \(Z+c\) (medium blue), \(Z+\)light (light blue), diboson (gray), and fake lepton (purple). The hatched area represents the uncertainty in the predictions.

The correlation matrix of the fit parameters for the six combined regions, including the signal regions (electron+jets: 1-lepton 1-bjet and 1-lepton 2-bjet inclusive, muon+jets: 1-lepton 1-bjet and 1-lepton 2-bjet inclusive, dilepton: 2-lepton 1-bjet and 2-lepton 2-bjet inclusive) is shown.

The impact of systematic uncertainties on the fitted signal-strength parameter $\hat{\mu}$ for the combined (six signal regions ($e+$jets: $1\ell1b$ and $1\ell2b\mathrm{incl}$, $\mu+$jets: $1\ell1b$ and $1\ell2b\mathrm{incl}$, dilepton: $2\ell1b$ and $2\ell2b\mathrm{incl}$) fit of all channels. Only the 15 most significant systematic uncertainties are shown and listed in decreasing order of their impact on $\mu$ on the $y$-axis. The empty (filled) blue/cyan boxes correspond to the pre-fit (post-fit) impact on $\mu$, referring to the upper $x$-axis. The impact of each systematic uncertainty, $\Delta \mu$, is calculated by comparing the nominal best-fit value of $\mu$ with the result of the fit when fixing the corresponding nuisance parameter $\theta$ to its best-fit value $\hat{\theta}$ shifted by its pre-fit (post-fit) uncertainties $\hat{\theta} \pm \Delta \theta(\hat{\theta} \pm \Delta \hat{\theta})$. The black points, which refer to the lower $x$-axis, show the pulls of the fitted nuisance parameters, i.e., the deviations of the fitted parameters $\hat{\theta}$ from their nominal values $\theta_0$, normalized to their nominal uncertainties $\Delta \theta$. The black lines show the post-fit uncertainties of the nuisance parameters, relative to their nominal uncertainties, which are indicated by the dashed lines.

Breakdown of relative systematic uncertainties in the measured ${t\bar{t}}$ cross-section. The quoted uncertainties are obtained by repeating the fit with a group of nuisance parameters fixed to their fitted values and subtracting in quadrature the resulting total uncertainty from the uncertainty of the complete fit. However, the total uncertainty is not the quadratic sum of the grouped impacts, as this approach neglects the correlation among the different groups.

The signal strength $\mu_{t\bar{t}}$, defined as the ratio of the observed signal for the combined six signal regions ($e+$jets: $1\ell1b$ and $1\ell2b\mathrm{incl}$, $\mu+$jets: $1\ell1b$ and $1\ell2b\mathrm{incl}$, dilepton: $2\ell1b$ and $2\ell2b\mathrm{incl}$.) to the SM expectation with no nPDF effects included, is measured using a binned profile-likelihood method. The parameter $\mu_{t\bar{t}}$ is determined by the fit to the $H_{T}^{\ell,j}$ data distributions in the six signal regions, where the $H_{T}^{\ell,j}$ variable is defined as the scalar sum of the transverse momenta of the leptons and HI jets. Over all 9% uncertainties is observed

The figure shows the measurement of the top quark pair production cross-section, $\sigma_{t\bar{t}}$, in proton-lead (p+Pb) collisions at a center-of-mass energy of $\sqrt{s_{\mathrm{NN}}} = 8.16$ TeV, based on 165 nb$^{-1}$ of data. The central measured value is shown alongside theoretical predictions using various parton distribution functions (PDFs): MCFM TUJU21, MCFM nNNPDF30, MCFM nCTEQ15HQ, and MCFM EPPS21. The green and yellow bands represent the total and statistical uncertainties of the data, respectively. Additional measurements for comparison include the CMS result at 8.16 TeV for p+Pb collisions and an extrapolated ATLAS+CMS result for pp collisions at 8 TeV. Relevant references are indicated: PRL 119 (2017) 242001 and JHEP 07 (2023) 213.

The ATLAS measurement of \( R_{p\text{Pb}} \) as a function of the nuclear modification factor in proton-lead (\( p\) + Pb) collisions at a center-of-mass energy per nucleon pair \( \sqrt{s_{NN}} = 8.16 \) TeV, with an integrated luminosity of 165 nb\(^{-1}\). The black points represent theoretical predictions from various MCFM parton distribution functions (PDFs): TUJU21, nNNPDF30, nCTEQ15HQ, and EPPS21. The green band indicates the total uncertainty of the data, while the yellow band represents the statistical uncertainty. The dashed line at \( R_{p\text{Pb}} = 1 \) shows the expected value in the absence of nuclear modifications.

Distribution of ${E}_{T}^{miss}$ after the fit of the multijet backgrounds, in the electron channel, in the $t\bar{t}$ 3-jets VR, without applying the cut on ${E}_{T}^{miss}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of ${E}_{T}^{miss}$ after the fit of the multijet backgrounds, in the electron channel, in the $t\bar{t}$ 4-jets VR, without applying the cut on ${E}_{T}^{miss}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the signal region, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the $W$+jets VR, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the $t\bar{t}$ 3-jets VR, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the $t\bar{t}$ 4-jets VR, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Expected distributions of the MEM discriminant $P(S|X)$ in the SR, for the s-channel single-top signal, and for the $t\bar{t}$ and $W$+jets backgrounds, for MEM discriminant values larger than $2.0\times10^{-4}$. Each distribution is normalised to unity. The binning is the same as the optimised binning used in the signal extraction fit, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the $W$+jets VR. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit presented in Section 5 in the paper. The uncertainty band indicates the simulation's statistical uncertainty and the normalisation uncertainties for the various processes in each bin, summed in quadrature. The ratio of the observed number to the predicted number of events in each bin is shown in the lower panel of the figure, with different vertical axis ranges. The binning is the same as the optimised binning used in the signal extraction fit described in Section 8 in the paper, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the $t\bar{t}$ 3-jets VR. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit presented in Section 5 in the paper. The uncertainty band indicates the simulation's statistical uncertainty and the normalisation uncertainties for the various processes in each bin, summed in quadrature. The ratio of the observed number to the predicted number of events in each bin is shown in the lower panel of the figure, with different vertical axis ranges. The binning is the same as the optimised binning used in the signal extraction fit described in Section 8 in the paper, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the $t\bar{t}$ 4-jets VR. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit presented in Section 5 in the paper. The uncertainty bands indicate the simulation's statistical uncertainty and the normalisation uncertainties for the various processes in each bin, summed in quadrature. The ratio of the observed number to the predicted number of events in each bin is shown in the lower panel of the figure, with different vertical axis ranges. The binning is the same as the optimised binning used in the signal extraction fit described in Section 8 in the paper, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the SR before the fit to data, for MEM discriminant values larger than $2.0\times10^{-4}$. The lower panel of the figure shows the ratio of the data to the prediction, with different vertical axis ranges. The uncertainty band indicates the total uncertainties and their correlations in each bin. The uncertainties in the $t\bar{t}$ and $W$+jets normalisation factors, as well as in the s-channel signal cross-section, are not defined pre-fit and therefore not included. The binning is the same as the optimised binning used in the fit, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the SR after the fit to data, for MEM discriminant values larger than $2.0\times10^{-4}$. The lower panel of the figure shows the ratio of the data to the prediction, with different vertical axis ranges. The uncertainty band indicates the total uncertainties and their correlations in each bin. The binning is the same as the optimised binning used in the fit, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the SR after the fit to data, for MEM discriminant values larger than $2.0\times10^{-4}$, after subtraction of all backgrounds. The fitted distribution for the simulation of the signal is shown together with the post-fit uncertainty in the backgrounds. The binning is the same as the optimised binning used in the fit, resulting in a non-linear horizontal scale.

Pre-fit and post-fit event yields in the SR, for MEM discriminant values larger than $2.0\times10^{-4}$. The central value of the event yield for each process is calculated by summing the values of the discriminant bin contents, using the nominal expected yield for the pre-fit value, and the best-fit estimate for the post-fit value. The error includes statistical and systematic uncertainties summed in quadrature. All sources of systematic uncertainties are included, taking into account correlations and anti-correlations in the post-fit case. The uncertainties in the $t\bar{t}$ and $W$+jets normalisation factors, as well as in the s-channel signal cross-section, are not defined pre-fit and therefore only included in the post-fit uncertainties.

Observed impact of the different sources of uncertainty on the measured s-channel signal cross-section, grouped by categories. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. The 'Systematic uncertainties' category combines all sources of systematic uncertainties. The statistical uncertainty is obtained by repeating the fit after having fixed all nuisance parameters, including the $t\bar{t}$ and $W$+jets normalisation factors. 'Total' gives the total uncertainty on the measurement.

Observed impact of the different sources of $t\bar{t}$ modelling uncertainty on the measured s-channel signal cross-section. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, and 'ME/PS matching' to the matching of the ME to the parton shower.

Observed impact of the different sources of s-channel modelling uncertainty on the measured s-channel signal cross-section. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, as described in Section 7 in the paper.

Observed impact of the different sources of t-channel modelling uncertainty on the measured s-channel signal cross-section. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, as described in Section 7 in the paper.

Observed impact of the different sources of $tW$ modelling uncertainty on the measured s-channel signal cross-section, grouped by categories. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, and '$t\bar{t}$ overlap' to the algorithm removing the overlap between $tW$ and $t\bar{t}$ production at NLO, as described in Section 7 in the paper.

Observed impact of the different sources of PDF uncertainties on the measured s-channel signal cross-section, grouped by categories. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root.

Comparison between data and prediction after the fit to data in the signal region for the leading-jet $p_{T}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the leading-jet $\eta$. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the subleading-jet $p_{T}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the subleading-jet $\eta$. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the lepton $p_{T}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the lepton $\eta$. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the ${E}_{T}^{miss}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the $m_{T}^{W}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Nuisance parameters ranked according to their post-fit impacts on the best-fit value of the ratio $\mu$ of the measured cross-section to the predicted cross-section. In the figure, only the 20 nuisance parameters with the largest post-fit impacts are shown. The empty (solid) blue rectangles illustrate the pre-fit (post-fit) impact on $\mu$, corresponding to the upper axis. The pre-fit (post-fit) impact of each nuisance parameter, $\Delta\mu$, is calculated as the difference in the fitted value of $\mu$ between the nominal fit and the fit when fixing the corresponding nuisance parameter to $\hat{\theta}\pm\Delta\theta$ ($\hat{\theta}\pm\Delta\hat{\theta}$), where $\hat{\theta}$ is the best-fit value of the nuisance parameter and $\Delta\theta$ ($\Delta\hat{\theta}$) is its pre-fit (post-fit) uncertainty. Several systematic uncertainties are split into different nuisance parameters, which are indicated by NP. JES (JER) indicates jet energy scale (resolution), and $\gamma$ indicates a nuisance parameter associated to the MC statistics in one of the 18 bins numbered from 0 to 17. The black points show the best-fit values of the nuisance parameters, with the error bars representing the post-fit uncertainties. Each nuisance parameter is shown wrt. its nominal value, $\theta_0$, and in units of its pre-fit uncertainty, except the free-floating normalisation factors of the $t\bar{t}$ and $W$+jets backgrounds, and the parameters associated to the MC statistics in each bin, for which the post-fit values and uncertainties are shown.

Correlation matrix of the nuisance parameters and of the ratio $\mu$ of the measured cross-section to the predicted cross-section. The correlations are given after the fit to data. In the figure, only the parameters which have a correlation of at least 0.2 with any other parameter are shown.

Distribution of the MEM discriminant $P(S|X)$ in the SR for MEM discriminant values larger than $2.0\times10^{-4}$, for the collision data used for the measurement, and for 1000 pseudo-data replicas, generated using a bootstrapping technique, in order to assess the statistical correlations between this measurement and others, for the purpose of combinations. The replicas are obtained by reweighting each observed data event by a random integer generated according to Poisson statistics, using the <a href="https://zenodo.org/record/5361038">BootstrapGenerator</a> software package , which implements a technique described in <a href="https://cds.cern.ch/record/2759945/">ATL-PHYS-PUB-2021-011</a>. The ATLAS event number and run number of each event are used as seed to uniquely but reproducibly initialise the random number generator for each event. Each pseudo-data replica is assigned an index, ranging from 0 to 999, corresponding to the random number index used consistently for each observed data event.

Measured values of the signal cross-section and of the $t\bar{t}$ and $W$+jets normalisation factors, obtained by statistical-only fits to the collision data used for the measurement, and to 1000 pseudo-data replicas, generated using a bootstrapping technique, in order to assess the statistical correlations between this measurement and others, for the purpose of combinations. The central values and their statistical uncertainties are obtained by repeating the fit after having fixed all nuisance parameters, except the $t\bar{t}$ and $W$+jets normalisation factors, which are let free-floating (unlike for the statistical uncertainty on the cross-section quoted in the paper). The replicas are obtained by reweighting each observed data event by a random integer generated according to Poisson statistics, using the <a href="https://zenodo.org/record/5361038">BootstrapGenerator</a> software package , which implements a technique described in <a href="https://cds.cern.ch/record/2759945/">ATL-PHYS-PUB-2021-011</a>. The ATLAS event number and run number of each event are used as seed to uniquely but reproducibly initialise the random number generator for each event. Each pseudo-data replica is assigned an index, ranging from 0 to 999, corresponding to the random number index used consistently for each observed data event.

Signal region detector-level distribution for the observable $p_{\mathrm{T}}^{\mathrm{lead}\, \ell}$.

Signal region detector-level distribution for the observable $m_{e\mu}$.

Signal region detector-level distribution for the observable $p_{\mathrm{T}}^{e\mu}$.

Measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $|y_{e\mu}|$

Relative systematic uncertainties for the fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $|y_{e\mu}|$

Measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $|\Delta \phi(e \mu)|$

Relative systematic uncertainties for the fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $|\Delta \phi(e \mu)|$

Measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $ \cos\theta^{\ast}$

Relative systematic uncertainties for the fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $ \cos\theta^{\ast}$

Measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $p_{\mathrm{T}}^{\mathrm{lead}\, \ell}$

Relative systematic uncertainties for the fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $p_{\mathrm{T}}^{\mathrm{lead}\, \ell}$

Measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $m_{e\mu}$

Relative systematic uncertainties for the fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $m_{e\mu}$

Measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $p_{\mathrm{T}}^{e\mu}$

Relative systematic uncertainties for the fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $p_{\mathrm{T}}^{e\mu}$

The statistical correlation coefficients (in percentage) between bins for the measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $|y_{e\mu}|$

The total correlation coefficients (in percentage) between bins for the measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $|y_{e\mu}|$

The statistical correlation coefficients (in percentage) between bins for the measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $|\Delta \phi(e \mu)|$

The total correlation coefficients (in percentage) between bins for the measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $|\Delta \phi(e \mu)|$

The statistical correlation coefficients (in percentage) between bins for the measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $ \cos\theta^{\ast}$

The total correlation coefficients (in percentage) between bins for the measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $ \cos\theta^{\ast}$

The statistical correlation coefficients (in percentage) between bins for the measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $p_{\mathrm{T}}^{\mathrm{lead}\, \ell}$

The total correlation coefficients (in percentage) between bins for the measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $p_{\mathrm{T}}^{\mathrm{lead}\, \ell}$

The statistical correlation coefficients (in percentage) between bins for the measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $m_{e\mu}$

The total correlation coefficients (in percentage) between bins for the measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $m_{e\mu}$

The statistical correlation coefficients (in percentage) between bins for the measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $p_{\mathrm{T}}^{e\mu}$

The total correlation coefficients (in percentage) between bins for the measured fiducial differential cross-section of $WW \rightarrow e^{\pm}\nu\mu^{\mp}\nu$ production for the observable $p_{\mathrm{T}}^{e\mu}$

Parton dijet $M_{inv}$ vs $A_{LL}$ values with associated uncertainties, for topology C.

Parton dijet $M_{inv}$ vs $A_{LL}$ values with associated uncertainties, for topology D.

The correlation matrix for the point-to-point uncertainties (statistical and systematics) for the inclusive jet measurements.The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (statistical and systematics) for the inclusive jet measurements coupling with the forward-forward dijet measurements (topology A). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (statistical and systematics) for the inclusive jet measurements coupling with the forward-forward dijet measurements (topology B). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (statistical and systematics) for the inclusive jet measurements coupling with the forward-forward dijet measurements (topology C). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (statistical and systematics) for the inclusive jet measurements coupling with the forward-forward dijet measurements (topology D). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (systematics only) for forward-forward dijet measurements (topology A). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (systematics only) coupling forward-forward dijet measurements (topology A) with forward-central dijet measurements (topology B). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (systematics only) coupling forward-forward dijet measurements (topology A) with forward-central dijet measurements (topology C). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (systematics only) coupling forward-forward dijet measurements (topology A) with forward-central dijet measurements (topology D). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (systematics only) for forward-forward dijet measurements (topology B). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (systematics only) coupling forward-forward dijet measurements (topology B) with forward-central dijet measurements (topology C). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (systematics only) coupling forward-forward dijet measurements (topology B) with forward-central dijet measurements (topology D). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (systematics only) for forward-forward dijet measurements (topology C). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (systematics only) coupling forward-forward dijet measurements (topology C) with forward-central dijet measurements (topology D). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

The correlation matrix for the point-to-point uncertainties (systematics only) for forward-forward dijet measurements (topology D). The relative luminosity and beam polarization uncertainties are not included because they are the same for all points.

Parton inclusive-jet $p_T$ and $A_{LL}$ values with associated uncertainties for jet-$\eta$ region $0.5<|\eta|<1$.

Parton inclusive-jet $p_T$ and $A_{LL}$ values with associated uncertainties for jet-$\eta$ region $|\eta|<0.5$.

Parton dijet invariant mass $M_{inv}$ and $A_{LL}$ values with associated uncertainties for the $\textrm{sign}(\eta_1) = \textrm{sign}(\eta_2)$ topology.

Parton dijet invariant mass $M_{inv}$ and $A_{LL}$ values with associated uncertainties for the $\textrm{sign}(\eta_1) \neq \textrm{sign}(\eta_2)$ topology.

Parton inclusive-jet $p_T$, $x_T$, and $A_{LL}$ values with associated uncertainties for jet-$\eta$ region $|\eta|<1$.

The correlation matrix for the point-to-point uncertainties for inclusive jet measurements with jets in the $0.5<|\eta|<1$ region. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The correlation matrix for the point-to-point uncertainties for inclusive jet measurements with jets in the $|\eta|<0.5$ region. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The correlation matrix for the point-to-point uncertainties for inclusive jet measurements with jets in the $|\eta|<1$ region. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The correlation matrix for the point-to-point uncertainties coupling inclusive jet measurements with jets in the $|\eta|<0.5$ region and jets in the $0.5<|\eta|<1$ region. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The correlation matrix for the point-to-point uncertainties coupling inclusive jet measurements with jets in the $0.5<|\eta|<1$ region with dijet measurements with the the $\textrm{sign}(\eta_1) = \textrm{sign}(\eta_2)$ topology. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The correlation matrix for the point-to-point uncertainties coupling inclusive jet measurements with jets in the $0.5<|\eta|<1$ region with dijet measurements with the the $\textrm{sign}(\eta_1) \neq \textrm{sign}(\eta_2)$ topology. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The correlation matrix for the point-to-point uncertainties coupling inclusive jet measurements with jets in the $|\eta|<0.5$ region with dijet measurements with the the $\textrm{sign}(\eta_1) = \textrm{sign}(\eta_2)$ topology. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The correlation matrix for the point-to-point uncertainties coupling inclusive jet measurements with jets in the $|\eta|<0.5$ region with dijet measurements with the the $\textrm{sign}(\eta_1) \neq \textrm{sign}(\eta_2)$ topology. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The correlation matrix for the point-to-point uncertainties coupling inclusive jet measurements with jets in the $|\eta|<1$ region with dijet measurements with the the $\textrm{sign}(\eta_1) = \textrm{sign}(\eta_2)$ topology. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The correlation matrix for the point-to-point uncertainties coupling inclusive jet measurements with jets in the $|\eta|<1$ region with dijet measurements with the the $\textrm{sign}(\eta_1) \neq \textrm{sign}(\eta_2)$ topology. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The correlation matrix for the point-to-point uncertainties for dijet measurements with the $\textrm{sign}(\eta_1) = \textrm{sign}(\eta_2)$ topology. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The correlation matrix for the point-to-point uncertainties for dijet measurements with the $\textrm{sign}(\eta_1) \neq \textrm{sign}(\eta_2)$ topology. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The correlation matrix for the point-to-point uncertainties coupling dijet measurements with the $\textrm{sign}(\eta_1) \neq \textrm{sign}(\eta_2)$ topology and the $\textrm{sign}(\eta_1) = \textrm{sign}(\eta_2)$ topology. The $A_{LL}$ uncertainty contribution of $0.0007$ from uncertainty in the relative luminosity measurement and $6.1\%$ from the beam polarization uncertainty, which are common to all the data points, are separated from the listed values.

The jet-like yield in $\mid\Delta\eta\mid<$0.78 as a function of $p_T^{trigger}$ for $K_S^0$-h and $\Lambda$-h correlations for 1.5 GeV/$c$ < $p_T^{associated}$ < $p_T^{trigger}$ in minimum bias $d$+Au collisions at $\sqrt{s_{NN}}$ = 200 GeV. Statistical errors listed in table. 5.4% systematic error on all points.

The jet-like yield in $\mid\Delta\eta\mid<$0.78 as a function of $p_T^{trigger}$ for $K_S^0$-h and $\Lambda$-h correlations for 1.5 GeV/$c$ < $p_T^{associated}$ < $p_T^{trigger}$ in 0-60% Cu+Cu collisions at $\sqrt{s_{NN}}$ = 200 GeV. Statistical errors listed in table. 5.4% systematic error on all points.

The jet-like yield in $\mid\Delta\eta\mid<$0.78 as a function of $p_T^{trigger}$ for $K_S^0$-h and $\Lambda$-h correlations for 1.5 GeV/$c$ < $p_T^{associated}$ < $p_T^{trigger}$ in 40-80% Au+Au collisions at $\sqrt{s_{NN}}$ = 200 GeV. Statistical errors listed in table. 5.4% systematic error on all points.

The jet-like yield in $\mid\Delta\eta\mid<$0.78 as a function of $p_T^{trigger}$ for $K_S^0$-h and $\Lambda$-h correlations for 1.5 GeV/$c$ < $p_T^{associated}$ < $p_T^{trigger}$ in 0-12% Au+Au collisions at $\sqrt{s_{NN}}$ = 200 GeV. Statistical errors listed in table. 5.4% systematic error on all points.

Centrality dependence of the jet-like yield of $K_S^0$-h and $\Lambda$-h correlations for 3 < $p_T^{trigger}$ < 6 GeV/$c$ and 1.5 GeV/$c$ < $p_T^{associated}$ < $p_T^{trigger}$ in Cu+Cu collisions at $\sqrt{s_{NN}}$ = 200 GeV. 5.4% systematic error on all points.

Centrality dependence of the jet-like yield of $K_S^0$-h and $\Lambda$-h correlations for 3 < $p_T^{trigger}$ < 6 GeV/$c$ and 1.5 GeV/$c$ < $p_T^{associated}$ < $p_T^{trigger}$ in Au+Au collisions at $\sqrt{s_{NN}}$ = 200 GeV. 5.4% systematic error on all points.

Centrality dependence of the jet-like yield of $K_S^0$-h and $\Lambda$-h correlations for 3 < $p_T^{trigger}$ < 6 GeV/$c$ and 1.5 GeV/$c$ < $p_T^{associated}$ < $p_T^{trigger}$ in $d$+Au collisions at $\sqrt{s_{NN}}$ = 200 GeV. 5.4% systematic error on all points.

Centrality dependence of the jet-like yield of $K_S^0$-h and $\Lambda$-h correlations for 3 < $p_T^{trigger}$ < 6 GeV/$c$ and 1.5 GeV/$c$ < $p_T^{associated}$ < $p_T^{trigger}$ in minimum bias $d$+Au and 0-60% central Cu+Cu collisions at $\sqrt{s_{NN}}$ = 200 GeV. 5.4% systematic error on all points.

Nuclear modicifation factor vs. N_coll $J\psi$ with|y|<1 and pT < 3 GeV/c in d Au collisions.

The invariant cross section versus transverse momentum for J/$\psi$ with $|y|\lt 1$ in $p+p$ collisions.

The invariant yield versus transverse momentum for $J/\Psi$ with |y| < 1 in 0 - 100 percent central d+Au collisions.