Dijet invariant mass distribution for the category with at least one b-tagged jet.

Dijet invariant mass distribution for the category with both jets b-tagged.

The 95% CL upper limits on the cross-section times acceptance times branching ratio into two jets as a function of the mass of q* signal.

The 95% CL upper limits on the cross-section times acceptance times branching ratio into two jets as a function of the mass of QBH signal.

The 95% CL upper limits on the cross-section times acceptance times branching ratio into two jets as a function of the mass of W' signal.

The 95% CL upper limits on the cross-section times acceptance times branching ratio into two jets as a function of the mass of W* signal.

The upper limits on the DM mediator Z' signal at 95% CL from the inclusive category. The 95% CL upper limits are set on the universal quark coupling $g_q$ as a function of the Z' mass.

The 95% CL upper limit on the cross-section times acceptance times b-tagging efficiency times branching ratio as a function of the mass of the b* signal.

The 95% CL upper limit on the cross-section times acceptance times b-tagging efficiency times branching ratio as a function of the signal mass in the DM mediator Z' with $g_q$ = 0.25 model.

The 95% CL upper limit on the cross-section times acceptance times b-tagging efficiency times branching ratio as a function of the signal mass in the SSM Z' model.

The 95% CL upper limit on the cross-section times acceptance times b-tagging efficiency times branching ratio as a function of the signal mass in the graviton with $k/\overline{M}_{PL}=0.2$ model.

The 95% CL upper limit on the cross-section times kinematic acceptance times branching ratio for resonances with a generic Gaussian shape, as a function of the Gaussian mean mass in the inclusive category. Different widths, from 0% up to 15% of the signal mass, are considered. Gaussian-shape signals with 0% widths correspond to signal widths smaller than the experimental resolution. For a Gaussian-shaped signal with a relative width of 15%, the limits are truncated at high mass when the broad signal starts to overlap the upper end of the mass spectrum.

The 95% CL upper limit on the cross-section times kinematic acceptance times b-tagging efficiency times branching ratio for resonances with a generic Gaussian shape, as a function of the Gaussian mean mass in the 1 b category. Different widths, from 0% up to 15% of the signal mass, are considered. Gaussian-shape signals with 0% widths correspond to signal widths smaller than the experimental resolution. For a Gaussian-shaped signal with a relative width of 15%, the limits are truncated at high mass when the broad signal starts to overlap the upper end of the mass spectrum.

The 95% CL upper limit on the cross-section times kinematic acceptance times b-tagging efficiency times branching ratio for resonances with a generic Gaussian shape, as a function of the Gaussian mean mass in the 2 b category. Different widths, from 0% up to 15% of the signal mass, are considered. Gaussian-shape signals with 0% widths correspond to signal widths smaller than the experimental resolution. For a Gaussian-shaped signal with a relative width of 15%, the limits are truncated at high mass when the broad signal starts to overlap the upper end of the mass spectrum.

The expected 95% CL upper limits on the cross-section times acceptance times b-tagging efficiency times branching ratio as a function of the DM mediator Z' mass for the current and previous iterations of the analysis. The upper limit of the previous result was obtained with the Bayesian method and is also shown scaled to the 139 fb$^{-1}$ integrated luminosity of the current result to illustrate the effect of the analysis improvements.

Acceptance for the QBH, Q* and W' benchmark signal models in the inclusive category, as a function of the simulated mass.

Acceptance for the DM Z' benchmark signal model for various $g_q$ coupling parameters in the inclusive category, as a function of the simulated mass.

Acceptance for the W* benchmark signal model in the inclusive category, as a function of the simulated mass.

Acceptance times b-tagging efficiency for the b* benchmark signal model in the 1b category, as a function of the simulated mass.

Acceptance times b-tagging efficiency for the DM Z' with $g_q$=0.25, SSM Z' and graviton with $k/\overline{M}_{PL}=0.2$ benchmark signal models in the 2b category, as a function of the simulated mass.

The expected 95% CL upper limits on the cross-section times branching ratio as a function of the DM mediator Z' mass for the current and previous iterations of the analysis. The upper limit of the previous result was obtained with the Bayesian method and is also shown scaled to the 139 fb$^{-1}$ integrated luminosity of the current result to illustrate the effect of the analysis improvements. The current b-tagging requirement is tighter than the previous one for high-$p_T$ jets, resulting in a data sample with limited size for mass above 4 TeV. The background rejection, instead, has improved significantly across the entire mass spectrum inspected by the analysis.

$p_{T}$-distributions of kaons ($K^{+}+K^{-}$) measured in pp collisions at $\sqrt{s}$ = 5.02 TeV.

$p_{T}$-distributions of protons ($p+pbar$) measured in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV.

$p_{T}$-distributions of protons ($p+pbar$) measured in pp collisions at $\sqrt{s}$ = 5.02 TeV.

$p_{T}$-distributions of kaons ($K^{+}+K^{-}$)/pions ($\pi^{+}+\pi^{-}$) measured in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV.

$p_{T}$-distributions of kaons ($K^{+}+K^{-}$)/pions ($\pi^{+}+\pi^{-}$) measured in pp collisions at $\sqrt{s}$ = 5.02 TeV.

$p_{T}$-distributions of protons ($p+pbar$)/pions ($\pi^{+}+\pi^{-}$) measured in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV.

$p_{T}$-distributions of protons ($p+pbar$)/pions ($\pi^{+}+\pi^{-}$) measured in pp collisions at $\sqrt{s}$ = 5.02 TeV.

Integrated yield ratios of kaons ($K^{+}+K^{-}$) to pions ($\pi^{+}+\pi^{-}$) measured in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV.

Integrated yield ratios of kaons ($K^{+}+K^{-}$) to pions ($\pi^{+}+\pi^{-}$) measured in pp collisions at $\sqrt{s}$ = 5.02 TeV.

Integrated yield ratios of protons ($p+pbar$) to pions ($\pi^{+}+\pi^{-}$) measured in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV.

Integrated yield ratios of protons ($p+pbar$) to pions ($\pi^{+}+\pi^{-}$) measured in pp collisions at $\sqrt{s}$ = 5.02 TeV.

$p_{T}$-dependent nuclear modification factor of pions ($\pi^{+}+\pi^{-}$) measured in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV.

$p_{T}$-dependent nuclear modification factor of kaons ($K^{+}+K^{-}$) measured in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV.

$p_{T}$-dependent nuclear modification factor of protons ($p+pbar$) measured in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV.

Invariant $p_{T}$-differential spectra of $\Omega- + \bar{\Omega+}$ in p+p and p+Pb at $\sqrt{s}$=5.02 TeV in |$y_{CM}$| < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in |$y_{CM}$| < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in |$y_{CM}$| < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in |$y_{CM}$| < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in |$y_{CM}$| < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in -1.8 < $y_{CM}$ < 0

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in -1.8 < $y_{CM}$ < 0

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in -1.8 < $y_{CM}$ < 0

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0 < $y_{CM}$ < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0 < $y_{CM}$ < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0 < $y_{CM}$ < 1.8

Invariant $p_{T}$-differential spectra of ${K_{0}}^{S}$ in p+Pb at $\sqrt{s}$=5.02 TeV in various $y_{CM}$ ranges

Invariant $p_{T}$-differential spectra of $\Lambda + \bar{\Lambda}$ in p+Pb at $\sqrt{s}$=5.02 TeV in various $y_{CM}$ ranges

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0.3 < |$y_{CM}$| < 0.8

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0.3 < |$y_{CM}$| < 0.8

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0.3 < |$y_{CM}$| < 0.8

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0.8 < |$y_{CM}$| < 1.3

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0.8 < |$y_{CM}$| < 1.3

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0.8 < |$y_{CM}$| < 1.3

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 1.3 < |$y_{CM}$| < 1.8

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 1.3 < |$y_{CM}$| < 1.8

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 1.3 < |$y_{CM}$| < 1.8

Experimental Xi values and FJF predictions for the four NRQCD terms using BK LDME parameters

Experimental Xi values and FJF predictions for the four NRQCD terms using BCKL LDME parameters

Experimental Xi values and FJF predictions for the four NRQCD terms using BK LDME parameters

The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.

The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.

The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.

The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.

The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.

The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.

The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.

The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.

The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.

The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.

The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.

The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.

The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.

Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production

Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Fig. 1 Left, data for jet radius R=0.2. Unfolded pp full jet cross-section at $\sqrt{s}$ = 5.02 TeV for R = 0.1 − 0.6. No leading track requirement is imposed.

Fig. 1 Left, data for jet radius R=0.3. Unfolded pp full jet cross-section at $\sqrt{s}$ = 5.02 TeV for R = 0.1 − 0.6. No leading track requirement is imposed.

Fig. 1 Left, data for jet radius R=0.3. Unfolded pp full jet cross-section at $\sqrt{s}$ = 5.02 TeV for R = 0.1 − 0.6. No leading track requirement is imposed.

Fig. 1 Left, data for jet radius R=0.4. Unfolded pp full jet cross-section at $\sqrt{s}$ = 5.02 TeV for R = 0.1 − 0.6. No leading track requirement is imposed.

Fig. 1 Left, data for jet radius R=0.4. Unfolded pp full jet cross-section at $\sqrt{s}$ = 5.02 TeV for R = 0.1 − 0.6. No leading track requirement is imposed.

Fig. 1 Left, data for jet radius R=0.5. Unfolded pp full jet cross-section at $\sqrt{s}$ = 5.02 TeV for R = 0.1 − 0.6. No leading track requirement is imposed.

Fig. 1 Left, data for jet radius R=0.5. Unfolded pp full jet cross-section at $\sqrt{s}$ = 5.02 TeV for R = 0.1 − 0.6. No leading track requirement is imposed.

Fig. 1 Left, data for jet radius R=0.6. Unfolded pp full jet cross-section at $\sqrt{s}$ = 5.02 TeV for R = 0.1 − 0.6. No leading track requirement is imposed.

Fig. 1 Left, data for jet radius R=0.6. Unfolded pp full jet cross-section at $\sqrt{s}$ = 5.02 TeV for R = 0.1 − 0.6. No leading track requirement is imposed.

Fig. 2, values for jet radius R=0.1. Non-perturbative correction factor applied to parton-level NLO+NLL predictions, obtained from PYTHIA 8 tune A14 as the ratio of the inclusive jet spectrum at hadron-level with MPI compared to parton-level without MPI.

Fig. 2, values for jet radius R=0.1. Non-perturbative correction factor applied to parton-level NLO+NLL predictions, obtained from PYTHIA 8 tune A14 as the ratio of the inclusive jet spectrum at hadron-level with MPI compared to parton-level without MPI.

Fig. 2, values for jet radius R=0.2. Non-perturbative correction factor applied to parton-level NLO+NLL predictions, obtained from PYTHIA 8 tune A14 as the ratio of the inclusive jet spectrum at hadron-level with MPI compared to parton-level without MPI.

Fig. 2, values for jet radius R=0.2. Non-perturbative correction factor applied to parton-level NLO+NLL predictions, obtained from PYTHIA 8 tune A14 as the ratio of the inclusive jet spectrum at hadron-level with MPI compared to parton-level without MPI.

Fig. 2, values for jet radius R=0.3. Non-perturbative correction factor applied to parton-level NLO+NLL predictions, obtained from PYTHIA 8 tune A14 as the ratio of the inclusive jet spectrum at hadron-level with MPI compared to parton-level without MPI.

Fig. 2, values for jet radius R=0.3. Non-perturbative correction factor applied to parton-level NLO+NLL predictions, obtained from PYTHIA 8 tune A14 as the ratio of the inclusive jet spectrum at hadron-level with MPI compared to parton-level without MPI.

Fig. 2, values for jet radius R=0.4. Non-perturbative correction factor applied to parton-level NLO+NLL predictions, obtained from PYTHIA 8 tune A14 as the ratio of the inclusive jet spectrum at hadron-level with MPI compared to parton-level without MPI.

Fig. 2, values for jet radius R=0.4. Non-perturbative correction factor applied to parton-level NLO+NLL predictions, obtained from PYTHIA 8 tune A14 as the ratio of the inclusive jet spectrum at hadron-level with MPI compared to parton-level without MPI.

Fig. 2, values for jet radius R=0.5. Non-perturbative correction factor applied to parton-level NLO+NLL predictions, obtained from PYTHIA 8 tune A14 as the ratio of the inclusive jet spectrum at hadron-level with MPI compared to parton-level without MPI.

Fig. 2, values for jet radius R=0.5. Non-perturbative correction factor applied to parton-level NLO+NLL predictions, obtained from PYTHIA 8 tune A14 as the ratio of the inclusive jet spectrum at hadron-level with MPI compared to parton-level without MPI.

Fig. 2, values for jet radius R=0.6. Non-perturbative correction factor applied to parton-level NLO+NLL predictions, obtained from PYTHIA 8 tune A14 as the ratio of the inclusive jet spectrum at hadron-level with MPI compared to parton-level without MPI.

Fig. 2, values for jet radius R=0.6. Non-perturbative correction factor applied to parton-level NLO+NLL predictions, obtained from PYTHIA 8 tune A14 as the ratio of the inclusive jet spectrum at hadron-level with MPI compared to parton-level without MPI.

Fig. 3 Bottom, data for jet radius ratio R=0.1/R=0.2. Unfolded pp jet cross-section ratios for various R. With R = 0.1 in the numerator.

Fig. 3 Bottom, data for jet radius ratio R=0.1/R=0.2. Unfolded pp jet cross-section ratios for various R. With R = 0.1 in the numerator.

Fig. 3 Bottom, data for jet radius ratio R=0.1/R=0.3. Unfolded pp jet cross-section ratios for various R. With R = 0.1 in the numerator.

Fig. 3 Bottom, data for jet radius ratio R=0.1/R=0.3. Unfolded pp jet cross-section ratios for various R. With R = 0.1 in the numerator.

Fig. 3 Bottom, data for jet radius ratio R=0.1/R=0.4. Unfolded pp jet cross-section ratios for various R. With R = 0.1 in the numerator.

Fig. 3 Bottom, data for jet radius ratio R=0.1/R=0.4. Unfolded pp jet cross-section ratios for various R. With R = 0.1 in the numerator.

Fig. 3 Bottom, data for jet radius ratio R=0.1/R=0.5. Unfolded pp jet cross-section ratios for various R. With R = 0.1 in the numerator.

Fig. 3 Bottom, data for jet radius ratio R=0.1/R=0.5. Unfolded pp jet cross-section ratios for various R. With R = 0.1 in the numerator.

Fig. 3 Bottom, data for jet radius ratio R=0.1/R=0.6. Unfolded pp jet cross-section ratios for various R. With R = 0.1 in the numerator.

Fig. 3 Bottom, data for jet radius ratio R=0.1/R=0.6. Unfolded pp jet cross-section ratios for various R. With R = 0.1 in the numerator.

Fig. 3 Top, data for jet radius ratio R=0.2/R=0.3. Unfolded pp jet cross-section ratios for various R. With R = 0.2 in the numerator.

Fig. 3 Top, data for jet radius ratio R=0.2/R=0.3. Unfolded pp jet cross-section ratios for various R. With R = 0.2 in the numerator.

Fig. 3 Top, data for jet radius ratio R=0.2/R=0.4. Unfolded pp jet cross-section ratios for various R. With R = 0.2 in the numerator.

Fig. 3 Top, data for jet radius ratio R=0.2/R=0.4. Unfolded pp jet cross-section ratios for various R. With R = 0.2 in the numerator.

Fig. 3 Top, data for jet radius ratio R=0.2/R=0.5. Unfolded pp jet cross-section ratios for various R. With R = 0.2 in the numerator.

Fig. 3 Top, data for jet radius ratio R=0.2/R=0.5. Unfolded pp jet cross-section ratios for various R. With R = 0.2 in the numerator.

Fig. 3 Top, data for jet radius ratio R=0.2/R=0.6. Unfolded pp jet cross-section ratios for various R. With R = 0.2 in the numerator.

Fig. 3 Top, data for jet radius ratio R=0.2/R=0.6. Unfolded pp jet cross-section ratios for various R. With R = 0.2 in the numerator.

Fig. 4 Left, data for pp. Unfolded pp and Pb-Pb full jet spectra at $\sqrt{s}=5.02$ TeV for $R=0.2$, with 5 GeV leading track requirement. The pp data points correspond to $\frac{\mathrm{d}^{2}\sigma}{\mathrm{d}p_{\mathrm{T,jet}} \mathrm{d}\eta_{\mathrm{jet}}}$.

Fig. 4 Left, data for pp. Unfolded pp and Pb-Pb full jet spectra at $\sqrt{s}=5.02$ TeV for $R=0.2$, with 5 GeV leading track requirement. The pp data points correspond to $\frac{\mathrm{d}^{2}\sigma}{\mathrm{d}p_{\mathrm{T,jet}} \mathrm{d}\eta_{\mathrm{jet}}}$.

Fig. 4 Left, data for PbPb. Unfolded pp and Pb-Pb full jet spectra at $\sqrt{s}=5.02$ TeV for $R=0.2$, with 5 GeV leading track requirement. The pp data points correspond to $\frac{\mathrm{d}^{2}\sigma}{\mathrm{d}p_{\mathrm{T,jet}} \mathrm{d}\eta_{\mathrm{jet}}}$.

Fig. 4 Left, data for PbPb. Unfolded pp and Pb-Pb full jet spectra at $\sqrt{s}=5.02$ TeV for $R=0.2$, with 5 GeV leading track requirement. The pp data points correspond to $\frac{\mathrm{d}^{2}\sigma}{\mathrm{d}p_{\mathrm{T,jet}} \mathrm{d}\eta_{\mathrm{jet}}}$.

Fig. 4 Right, data for pp. Unfolded pp and Pb-Pb full jet spectra at $\sqrt{s}=5.02$ TeV for $R=0.4$, with 7 GeV leading track requirement.

Fig. 4 Right, data for pp. Unfolded pp and Pb-Pb full jet spectra at $\sqrt{s}=5.02$ TeV for $R=0.4$, with 7 GeV leading track requirement.

Fig. 4 Right, data for PbPb. Unfolded pp and Pb-Pb full jet spectra at $\sqrt{s}=5.02$ TeV for $R=0.4$, with 7 GeV leading track requirement.

Fig. 4 Right, data for PbPb. Unfolded pp and Pb-Pb full jet spectra at $\sqrt{s}=5.02$ TeV for $R=0.4$, with 7 GeV leading track requirement.

Fig. 5 Left, data for pp jet cross section with leading track bias ratio 5/0. Ratio of the pp jet cross-section with various leading charged particle requirements

Fig. 5 Left, data for pp jet cross section with leading track bias ratio 5/0. Ratio of the pp jet cross-section with various leading charged particle requirements

Fig. 5 Left, data for pp jet cross section with leading track bias ratio 7/0. Ratio of the pp jet cross-section with various leading charged particle requirements

Fig. 5 Left, data for pp jet cross section with leading track bias ratio 7/0. Ratio of the pp jet cross-section with various leading charged particle requirements

Fig. 5 Left, data for pp jet cross section with leading track bias ratio 7/5. Ratio of the pp jet cross-section with various leading charged particle requirements

Fig. 5 Left, data for pp jet cross section with leading track bias ratio 7/5. Ratio of the pp jet cross-section with various leading charged particle requirements

Fig. 5 Right. Ratio of the R = 0.2 Pb–Pb jet cross-section with a 7 GeV/c leading charged particle requirement compared to a 5 GeV/c leading charged particle requirement.

Fig. 5 Right. Ratio of the R = 0.2 Pb–Pb jet cross-section with a 7 GeV/c leading charged particle requirement compared to a 5 GeV/c leading charged particle requirement.

Fig. 6 Top Left. Jet $R_{\mathrm{AA}}$ at $\sqrt{s}=5.02$ TeV for $R=0.2$. Same leading track requirement of 5 GeV is imposed on the numerator as well as denominator.

Fig. 6 Top Left. Jet $R_{\mathrm{AA}}$ at $\sqrt{s}=5.02$ TeV for $R=0.2$. Same leading track requirement of 5 GeV is imposed on the numerator as well as denominator.

Fig. 6 Top Right. Jet $R_{\mathrm{AA}}$ at $\sqrt{s}=5.02$ TeV for $R=0.4$. Same leading track requirement of 7 GeV is imposed on the numerator as well as denominator.

Fig. 6 Top Right. Jet $R_{\mathrm{AA}}$ at $\sqrt{s}=5.02$ TeV for $R=0.4$. Same leading track requirement of 7 GeV is imposed on the numerator as well as denominator.

Fig. 6 Bottom Left. Jet $R_{\mathrm{AA}}$ at $\sqrt{s}=5.02$ TeV for $R=0.2$. PbPb with leading track requirement of 5 GeV. pp reference without a leading track requirement.

Fig. 6 Bottom Left. Jet $R_{\mathrm{AA}}$ at $\sqrt{s}=5.02$ TeV for $R=0.2$. PbPb with leading track requirement of 5 GeV. pp reference without a leading track requirement.

Fig. 6 Bottom Right. Jet $R_{\mathrm{AA}}$ at $\sqrt{s}=5.02$ TeV for $R=0.4$. PbPb with leading track requirement of 7 GeV. pp reference without a leading track requirement.

Fig. 6 Bottom Right. Jet $R_{\mathrm{AA}}$ at $\sqrt{s}=5.02$ TeV for $R=0.4$. PbPb with leading track requirement of 7 GeV. pp reference without a leading track requirement.

Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.

Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.

Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.

Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.

Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.

Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.

Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.

Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.

Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.

Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.

Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.

Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.

N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.

N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.

N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.

The relative statistical and systematic uncertainties in % from various sources for the absolute cross section measurements in bins of Z pt on dimuons.

The relative statistical and systematic uncertainties in % from various sources for the absolute cross section measurements in bins of Z pt on dielectrons.

The relative statistical and systematic uncertainties in % from various sources for the absolute cross section measurements in bins of |y(Z)| on dimuons.

The relative statistical and systematic uncertainties in % from various sources for the absolute cross section measurements in bins of |y(Z)| on dielectrons.

The relative statistical and systematic uncertainties in % from various sources for the absolute cross section measurements in bins of $\phi^{\scriptscriptstyle *}_\eta$ on dimuons.

The relative statistical and systematic uncertainties in % from various sources for the absolute cross section measurements in bins of $\phi^{\scriptscriptstyle *}_\eta$ on dielectrons.

The relative statistical and systematic uncertainties in % from various sources for the normalized cross section measurements in bins of Z pt on dimuons.

The relative statistical and systematic uncertainties in % from various sources for the normalized cross section measurements in bins of Z pt on dielectrons.

The relative statistical and systematic uncertainties in % from various sources for the normalized cross section measurements in bins of |y(Z)| on dimuons.

The relative statistical and systematic uncertainties in % from various sources for the normalized cross section measurements in bins of |y(Z)| on dielectrons.

The relative statistical and systematic uncertainties in % from various sources for the normalized cross section measurements in bins of $\phi^{\scriptscriptstyle *}_\eta$ on dimuons.

The relative statistical and systematic uncertainties in % from various sources for the normalized cross section measurements in bins of $\phi^{\scriptscriptstyle *}_\eta$ on dielectrons.

The relative statistical and systematic uncertainties in % from various sources for the absolute double-differential cross section measurements in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dimuon final state.

The relative statistical and systematic uncertainties in % from various sources for the absolute double-differential cross section measurements in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dimuon final state.

The relative statistical and systematic uncertainties in % from various sources for the absolute double-differential cross section measurements in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dimuon final state.

The relative statistical and systematic uncertainties in % from various sources for the absolute double-differential cross section measurements in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dimuon final state.

The relative statistical and systematic uncertainties in % from various sources for the absolute double-differential cross section measurements in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dimuon final state.

The relative statistical and systematic uncertainties in % from various sources for the absolute double-differential cross section measurements in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dielectron final state.

The relative statistical and systematic uncertainties in % from various sources for the absolute double-differential cross section measurements in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dielectron final state.

The relative statistical and systematic uncertainties in % from various sources for the absolute double-differential cross section measurements in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dielectron final state.

The relative statistical and systematic uncertainties in % from various sources for the absolute double-differential cross section measurements in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dielectron final state.

The relative statistical and systematic uncertainties in % from various sources for the absolute double-differential cross section measurements in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dielectron final state.

The measured absolute cross sections in bins of |y(Z)|, using dressed level leptons. The cross sections are normalized by the bin width.

The measured absolute cross sections in bins of Z pt, using dressed level leptons. The cross sections are normalized by the bin width.

The measured absolute cross sections in bins of $\phi^{\scriptscriptstyle *}_\eta$, using dressed level leptons. The cross sections are normalized by the bin width.

The measured absolute cross sections in bins of Z pt different |y(Z)| bins, using dressed level leptons. The cross sections are normalized by the bin width.

The measured normalized cross sections in bins of Z pt, using dressed level leptons. The cross sections are divided by the bin width and then the distributions are normalized to 1.

The measured normalized cross sections in bins of $\phi^{\scriptscriptstyle *}_\eta$, using dressed level leptons. The cross sections are divided by the bin width and then the distributions are normalized to 1.

The measured normalized cross sections in bins of |y(Z)|, using dressed level leptons. The cross sections are divided by the bin width and then the distributions are normalized to 1.

The measured normalized cross sections in bins of Z pt in |y(Z)| bins, using dressed level leptons. The cross sections are divided by the bin width and then the distributions are normalized to 1.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt in the dimuon final state.

Covariance matrix using dressed level leptons for all bins used in bins of |y(Z)| in the dimuon final state.

Covariance matrix using dressed level leptons for all bins used in bins of $\phi^{\scriptscriptstyle *}_\eta$ in the dimuon final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dimuon final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dimuon final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dimuon final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dimuon final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dimuon final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt in the dielectron final state.

Covariance matrix using dressed level leptons for all bins used in bins of |y(Z)| in the dielectron final state.

Covariance matrix using dressed level leptons for all bins used in bins of $\phi^{\scriptscriptstyle *}_\eta$ in the dielectron final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dielectron final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dielectron final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dielectron final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dielectron final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dielectron final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt in the dimuon final state.

Covariance matrix using born level leptons for all bins used in bins of |y(Z)| in the dimuon final state.

Covariance matrix using born level leptons for all bins used in bins of $\phi^{\scriptscriptstyle *}_\eta$ in the dimuon final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dimuon final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dimuon final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dimuon final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dimuon final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dimuon final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt in the dielectron final state.

Covariance matrix using born level leptons for all bins used in bins of |y(Z)| in the dielectron final state.

Covariance matrix using born level leptons for all bins used in bins of $\phi^{\scriptscriptstyle *}_\eta$ in the dielectron final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dielectron final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dielectron final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dielectron final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dielectron final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dielectron final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt in the dimuon final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of |y(Z)| in the dimuon final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of $\phi^{\scriptscriptstyle *}_\eta$ in the dimuon final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dimuon final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dimuon final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dimuon final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dimuon final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dimuon final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt in the dielectron final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of |y(Z)| in the dielectron final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of $\phi^{\scriptscriptstyle *}_\eta$ in the dielectron final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dielectron final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dielectron final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dielectron final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dielectron final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dielectron final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt in the dimuon final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of |y(Z)| in the dimuon final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of $\phi^{\scriptscriptstyle *}_\eta$ in the dimuon final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dimuon final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dimuon final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dimuon final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dimuon final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dimuon final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt in the dielectron final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of |y(Z)| in the dielectron final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of $\phi^{\scriptscriptstyle *}_\eta$ in the dielectron final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dielectron final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dielectron final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dielectron final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dielectron final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dielectron final state.

The measured absolute cross sections in bins of |y(Z)|, using born level leptons. The cross sections are normalized by the bin width.

The measured absolute cross sections in bins of Z pt, using born level leptons. The cross sections are normalized by the bin width. The first bin (0-1 GeV) is not shown as large differences were observed in aMC@NLO and POWHEG predictions at Born level.

The measured absolute cross sections in bins of $\phi^{\scriptscriptstyle *}_\eta$, using born level leptons. The cross sections are normalized by the bin width.

The measured absolute cross sections in bins of Z pt different |y(Z)| bins, using born level leptons. The cross sections are normalized by the bin width. The first bin (0-1 GeV) is not shown as large differences were observed in aMC@NLO and POWHEG predictions at Born level.

The measured normalized cross sections in bins of Z pt, using born level leptons. The first bin (0-1 GeV) is not shown as large differences were observed in aMC@NLO and POWHEG predictions at Born level. The cross sections are divided by the bin width and then the distributions are normalized to 1.

The measured normalized cross sections in bins of $\phi^{\scriptscriptstyle *}_\eta$, using born level leptons. The cross sections are divided by the bin width and then the distributions are normalized to 1.

The measured normalized cross sections in bins of |y(Z)|, using born level leptons.

The measured normalized cross sections (left) in bins of Z pt in |y(Z)| bins, using born level leptons. The first bin (0-1 GeV) is not shown as large differences were observed in aMC@NLO and POWHEG predictions at Born level. The cross sections are divided by the bin width and then the distributions are normalized to 1.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt in the dilepton final state.

Covariance matrix using dressed level leptons for all bins used in bins of |y(Z)| in the dilepton final state.

Covariance matrix using dressed level leptons for all bins used in bins of $\phi^{\scriptscriptstyle *}_\eta$ in the dilepton final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dilepton final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dilepton final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dilepton final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dilepton final state.

Covariance matrix using dressed level leptons for all bins used in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dilepton final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt in the dilepton final state.

Covariance matrix using born level leptons for all bins used in bins of |y(Z)| in the dilepton final state.

Covariance matrix using born level leptons for all bins used in bins of $\phi^{\scriptscriptstyle *}_\eta$ in the dilepton final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dilepton final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dilepton final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dilepton final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dilepton final state.

Covariance matrix using born level leptons for all bins used in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dilepton final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt in the dilepton final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of |y(Z)| in the dilepton final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of $\phi^{\scriptscriptstyle *}_\eta$ in the dilepton final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dilepton final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dilepton final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dilepton final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dilepton final state.

Covariance matrix for normalized cross sections using dressed level leptons for all bins used in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dilepton final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt in the dilepton final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of |y(Z)| in the dilepton final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of $\phi^{\scriptscriptstyle *}_\eta$ in the dilepton final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 0 < |y(Z)| < 0.4 bin in the dilepton final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 0.4 < |y(Z)| < 0.8 bin in the dilepton final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 0.8 < |y(Z)| < 1.2 bin in the dilepton final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 1.2 < |y(Z)| < 1.6 bin in the dilepton final state.

Covariance matrix for normalized cross sections using born level leptons for all bins used in bins of Z pt for the 1.6 < |y(Z)| < 2.4 bin in the dilepton final state.