The dijet invariant mass distribution has been measured in the region between 140 and 1000 GeV/c2, in 1.8 TeV p p¯ collisions. Data collected with the Collider Detector at Fermilab show agreement with QCD calculations. A limit on quark compositeness of Λc>1.3 TeV is obtained. Axigluons with masses between 240 and 640 GeV/c2 are excluded at 95% C.L. if we assume ten open decay channels. Model-independent limits on the production of heavy particles decaying into two jets are also presented.
No description provided.
We present the results of a search for the top quark in 19.3 pb−1 of p¯p collisions at √s =1.8 TeV. The data were collected at the Fermilab Tevatron collider using the Collider Detector at Fermilab (CDF). The search includes standard model tt¯ decays to final states eeνν¯, eμνν¯, and μμνν¯ as well as e+ν+jets or μ+ν+jets. In the (e,μ)+ν+jets channel we search for b quarks from t decays via secondary vertex identification and via semileptonic decays of the b and cascade c quarks. In the dilepton final states we find two events with a background of 0.56−0.13+0.25 events. In the e,μ+ν+jets channel with a b identified via a secondary vertex, we find six events with a background of 2.3±0.3. With a b identified via a semileptonic decay, we find seven events with a background of 3.1±0.3. The secondary vertex and semileptonic-decay samples have three events in common. The probability that the observed yield is consistent with the background is estimated to be 0.26%. The statistics are too limited to firmly establish the existence of the top quark; however, a natural interpretation of the excess is that it is due to tt¯ production. We present several cross-checks. Some support this hypothesis; others do not. Under the assumption that the excess yield over background is due to tt¯, constrained fitting on a subset of the events yields a mass of 174±10−12+13 GeV/c2 for the top quark. The tt¯ cross section, using this top quark mass to compute the acceptance, is measured to be 13.9−4.8+6.1 pb.
Cross section refers to top quark mass equals 174 +- 10 +13 - 12 GeV. Two events in the dilepton final states and six events in the electron or muon nu jets final states.
We summarize a search for the top quark with the Collider Detector at Fermilab (CDF) in a sample of $\bar{p}p$ collisions at $\sqrt{s}$= 1.8 TeV with an integrated luminosity of 19.3pb$~{-1}$. We find 12 events consistent with either two $W$ bosons, or a $W$ boson and at least one $b$ jet. The probability that the measured yield is consistent with the background is 0.26\%. Though the statistics are too limited to establish firmly the existence of the top quark, a natural interpretation of the excess is that it is due to $t\bar{t}$ production. Under this assumption, constrained fits to individual events yield a top quark mass of $174 \pm 10~{+13}_{-12}$ GeV/c$~2$. The $t\bar{t}$ production cross section is measured to be $13.9~{+6.1}_{-4.8}$pb. (Submitted to Physical Review Letters on May 16, 1994).
No description provided.
We present an analysis of data from p p¯ collisions at a center-of-mass energy of √s =1800 GeV. A measurement is made of the ratio R≡σB(p p¯→W→eν)/σB(p p¯→Z0→ee). The data represent 19.6 pg−1 collected by the Collider Detector at Fermilab during the 1992–1993 collider run of the Fermilab Tevatron. We find R=10.90±0.32(stat)±0.29(syst), and from this value we extract a measurement of the W→eν branching ratio Γ(W→eν)/Γ(W)=0.1094±0.0033(stat)±0.0031(syst). From this branching ratio we set a limit on the top quark mass of mt>62 GeV/c2 at the 95% confidence level. In contrast with direct searches for the top quark, this limit makes no assumptions about the allowed decay modes of the top quark. In addition, we use a calculation of the leptonic width Γ(W→eν) to obtain a value for the W total decay width: Γ(W)=2.064±0.060(stat)±0.059(syst) GeV.
The cross section ratio contains the branching ratio of W --> E NU and Z0 --> E+ E-. RE = PBAR P --> W+ X.
A measurement of the inclusive bottom jet cross section is presented for events containing a $Z$ boson in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV using the Collider Detector at Fermilab. $Z$ bosons are identified in their electron and muon decay modes, and $b$ jets with $E_T>20$ GeV and $|\eta|<1.5$ are identified by reconstructing a secondary decay vertex. The measurement is based on an integrated luminosity of about 330 ${\rm pb}^{-1}$. A cross section times branching ratio of $\sigma (Z+b {\rm jets}) \times {\cal B}(Z \to \ell^+ \ell^-)= 0.93 \pm 0.36$ pb is found, where ${\cal B}(Z\to \ell^+ \ell^-)$ is the branching ratio of the $Z$ boson or $\gamma^*$ into a single flavor dilepton pair ($e$ or $\mu$) in the mass range between 66 and 116 GeV$/c^2$. The ratio of $b$ jets to the total number of jets of any flavor in the $Z$ sample, within the same kinematic range as the $b$ jets, is $2.36 \pm 0.92%$. Here, the uncertainties are the quadratic sum of statistical and systematic uncertainties. Predictions made with NLO QCD agree, within experimental and theoretical uncertainties, with these measurements.
B-jet cross section for the di-letpon mass from 66 to 116 GeV.
Ratio of the b-jet cross section to the inclusive Z0 cross section.
Ratio of the b-jet cross section to the generic jet cross section.
We present a new measurement of the $B^+$ meson differential cross section $d\sigma/d p_T$ at $\sqrt{s}=1960$ GeV. The data correspond to an integrated luminosity of 739pb$^{-1}$ collected with the upgraded CDF detector (CDF II) at the Fermilab Tevatron collider. $B^+$ candidates are reconstructed through the decay $B^+ \to J/\psi K^+$, with $J/\psi \to \mu^+ \mu^-$. The integrated cross section for producing $B^+$ mesons with $p_T \geq 6$ GeV/c and $|y| \leq 1$ is measured to be $2.78 \pm 0.24 \mu$b
The differential cross section (nb/GeV/c) for B+ mesons as a function of pT.
The The B+ production cross section.
We report on measurements of the inclusive jet production cross section as a function of the jet transverse momentum in pp-bar collisions at sqrt{s} = 1.96 TeV}, using the k_T algorithm and a data sample corresponding to 1.0 fb^-1 collected with the Collider Detector at Fermilab in Run II. The measurements are carried out in five different jet rapidity regions with |yjet| < 2.1 and transverse momentum in the range 54 < \ptjet < 700 GeV/c. Next-to-leading order perturbative QCD predictions are in good agreement with the measured cross sections.
Measured inclusive jet differential cross section as a function of PT for the rapidity range -0.1 to 0.1 with the jet resolution parameter D = 0.7.
Measured inclusive jet differential cross section as a function of PT for the absoloute rapidity range 0.1 to 0.7 with the jet resolution parameter D = 0.7.
Measured inclusive jet differential cross section as a function of PT for the absolute rapidity range 0.7 to 1.1 with the jet resolution parameter D = 0.7.
We present a measurement of the shapes of b-jets using 300 pb-1 of data obtained with the upgraded Collider Detector at Fermilab (CDF II) in p pbar collisions at center of mass energy sqrt{s}=1.96 TeV. This measurement covers a wide transverse momentum range, from 52 to 300 GeV/c. Samples of heavy-flavor enhanced jets together with inclusive jets are used to extract the average shapes of b-jets. The b-jets are expected to be broader than inclusive jets. Moreover, b-jets containing a single b-quark are expected to be narrower than those containing a b bbar pair from gluon splitting. The measured b-jet shapes are found to be significantly broader than expected from the PYTHIA and HERWIG Monte Carlo simulations. This effect may arise from an underestimation of the fraction of b-jets originating from gluon splitting in these simulations.
Measured integrated jet shapes for b-jets as a function of the jet cone parameter R with R0=0.7, for jet PT from 52 to 80 GeV.
Measured integrated jet shapes for b-jets as a function of the jet cone parameter R with R0=0.7, for jet PT from 80 to 104 GeV.
Measured integrated jet shapes for b-jets as a function of the jet cone parameter R with R0=0.7, for jet PT from 104 to 142 GeV.
We report a measurement of the single top quark production cross section in 2.2 ~fb-1 of p-pbar collision data collected by the Collider Detector at Fermilab at sqrt{s}=1.96 TeV. Candidate events are classified as signal-like by three parallel analyses which use likelihood, matrix element, and neural network discriminants. These results are combined in order to improve the sensitivity. We observe a signal consistent with the standard model prediction, but inconsistent with the background-only model by 3.7 standard deviations with a median expected sensitivity of 4.9 standard deviations. We measure a cross section of 2.2 +0.7 -0.6(stat+sys) pb, extract the CKM matrix element value |V_{tb}|=0.88 +0.13 -0.12 (stat+sys) +- 0.07(theory), and set the limit |V_{tb}|>0.66 at the 95% C.L.
Combined measured single top quark cross section in the s and t channels. The error is combined statistics and systematics.
A measurement of the $\bjet$ production cross section is presented for events containing a $Z$ boson produced in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV, using data corresponding to an integrated luminosity of 2 fb$^{-1}$ collected by the CDF II detector at the Tevatron. $Z$ bosons are selected in the electron and muon decay modes. Jets are considered with transverse energy $E_T>20$ GeV and pseudorapidity $|\eta|<1.5$ and are identified as $\bjets$ using a secondary vertex algorithm. The ratio of the integrated $Z+\bjet$ cross section to the inclusive $Z$ production cross section is measured to be $3.32 \pm 0.53 {\rm (stat.)} \pm 0.42 {\rm (syst.)}\times 10^{-3}$. This ratio is also measured differentially in jet $E_T$, jet $\eta$, $Z$-boson transverse momentum, number of jets, and number of $\bjets$. The predictions from leading order Monte Carlo generators and next-to-leading-order QCD calculations are found to be consistent with the measurements within experimental and theoretical uncertainties.
Ratio of integrated Z0 + bjet cross section to inclusive Z0 production.
Ratio of the Z0 + bjet to Z0 cross section as a function of the bjet ET.
Ratio of the Z0 + bjet to Z0 cross section as a function of the bjet pseudorapidity.