Showing 10 of 398 results
A combination of measurements of the inclusive top-quark pair production cross-section performed by ATLAS and CMS in proton-proton collisions at centre-of-mass energies of 7 and 8 TeV at the LHC is presented. The cross-sections are obtained using top-quark pair decays with an opposite-charge electron-muon pair in the final state and with data corresponding to an integrated luminosity of about 5 fb$^{-1}$ at $\sqrt{s}=7$ TeV and about 20 fb$^{-1}$ at $\sqrt{s}=8$ TeV for each experiment. The combined cross-sections are determined to be $178.5 \pm 4.7$ pb at $\sqrt{s}=7$ TeV and $243.3^{+6.0}_{-5.9}$ pb at $\sqrt{s}=8$ TeV with a correlation of 0.41, using a reference top-quark mass value of 172.5 GeV. The ratio of the combined cross-sections is determined to be $R_{8/7}= 1.363\pm 0.032$. The combined measured cross-sections and their ratio agree well with theory calculations using several parton distribution function (PDF) sets. The values of the top-quark pole mass (with the strong coupling fixed at 0.118) and the strong coupling (with the top-quark pole mass fixed at 172.5 GeV) are extracted from the combined results by fitting a next-to-next-to-leading-order plus next-to-next-to-leading-log QCD prediction to the measurements. Using a version of the NNPDF3.1 PDF set containing no top-quark measurements, the results obtained are $m_t^\text{pole} = 173.4^{+1.8}_{-2.0}$ GeV and $\alpha_\text{s}(m_Z)= 0.1170^{+ 0.0021}_{-0.0018}$.
Full covariance matrix including all systematic uncertainties expressed as nuisance parameters. With the exception of the cross section parameters, all parameters were normalised to 1 before the fit. Therefore, the diagonal elements represent the constraint in quadrature.
Full covariance matrix including all systematic uncertainties expressed as nuisance parameters. With the exception of the cross section parameters, all parameters were normalised to 1 before the fit. Therefore, the diagonal elements represent the constraint in quadrature.
A search for flavor-changing neutral-current couplings between a top quark, an up or charm quark and a $Z$ boson is presented, using proton-proton collision data at $\sqrt{s} = 13$ TeV collected by the ATLAS detector at the Large Hadron Collider. The analyzed dataset corresponds to an integrated luminosity of 139 fb$^{-1}$. The search targets both single-top-quark events produced as $gq\rightarrow tZ$ (with $q = u, c$) and top-quark-pair events, with one top quark decaying through the $t \rightarrow Zq$ channel. The analysis considers events with three leptons (electrons or muons), a $b$-tagged jet, possible additional jets, and missing transverse momentum. The data are found to be consistent with the background-only hypothesis and 95% confidence-level limits on the $t \rightarrow Zq$ branching ratios are set, assuming only tensor operators of the Standard Model effective field theory framework contribute to the $tZq$ vertices. These are $6.2 \times 10^{-5}$ ($13\times 10^{-5}$) for $t\rightarrow Zu$ ($t\rightarrow Zc$) for a left-handed $tZq$ coupling, and $6.6 \times 10^{-5}$ ($12\times 10^{-5}$) in the case of a right-handed coupling. These results are interpreted as 95% CL upper limits on the strength of corresponding couplings, yielding limits for $|C_{uW}^{(13)*}|$ and $|C_{uB}^{(13)*}|$ ($|C_{uW}^{(31)}|$ and $|C_{uB}^{(31)}|$) of 0.15 (0.16), and limits for $|C_{uW}^{(23)*}|$ and $|C_{uB}^{(23)*}|$ ($|C_{uW}^{(32)}|$ and $|C_{uB}^{(32)}|$) of 0.22 (0.21), assuming a new-physics energy scale $\Lambda_\text{NP}$ of 1 TeV.
Summary of the signal strength $\mu$ parameters obtained from the fits to extract LH and RH results for the FCNC tZu and tZc couplings. For the reference branching ratio, the most stringent limits are used.
Observed and expected 95% CL limits on the FCNC $t\rightarrow Zq$ branching ratios and the effective coupling strengths for different vertices and couplings (top eight rows). For the latter, the energy scale is assumed to be $\Lambda_{NP}$ = 1 TeV. The bottom rows show, for the case of the FCNC $t\rightarrow Zu$ branching ratio, the observed and expected 95% CL limits when only one of the two SRs, either SR1 or SR2, and all CRs are included in the likelihood.
Comparison between data and background prediction before the fit (Pre-Fit) for the mass of the SM top-quark candidate in SR1. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The four FCNC LH signals are also shown separately, normalized to five times the cross-section corresponding to the most stringent observed branching ratio limits. The first (last) bin in all distributions includes the underflow (overflow). The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction before the fit (Pre-Fit) for the mass of the FCNC top-quark candidate in SR1. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The four FCNC LH signals are also shown separately, normalized to five times the cross-section corresponding to the most stringent observed branching ratio limits. The first (last) bin in all distributions includes the underflow (overflow). The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction before the fit (Pre-Fit) for the mass of the SM top-quark candidate in SR2. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The four FCNC LH signals are also shown separately, normalized to five times the cross-section corresponding to the most stringent observed branching ratio limits. The first (last) bin in all distributions includes the underflow (overflow). The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction before the fit (Pre-Fit) for the transverse momentum of the Z boson candidate in SR2. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The four FCNC LH signals are also shown separately, normalized to five times the cross-section corresponding to the most stringent observed branching ratio limits. The first (last) bin in all distributions includes the underflow (overflow). The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the $D_{1}$ discriminant in the mass sideband CR1. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also separately shown, normalized to 500 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the $D_{2}^{u}$ discriminant in the mass sideband CR2. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also separately shown, normalized to 500 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the $D_{1}$ discriminant in SR1. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also separately shown, normalized to 50 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the $D_{2}^{u}$ discriminant in SR2. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also separately shown, normalized to 50 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZc LH coupling extraction. The distribution is for the $D_{1}$ discriminant in the mass sideband CR1. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZc LH signals are also separately shown, normalized to 500 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZc LH coupling extraction. The distribution is for the $D_{2}^{c}$ discriminant in the mass sideband CR2. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZc LH signals are also separately shown, normalized to 500 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZc LH coupling extraction. The distribution is for the $D_{1}$ discriminant in SR1. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZc LH signals are also separately shown, normalized to 50 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZc LH coupling extraction. The distribution is for the $D_{2}^{c}$ discriminant in SR2. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZc LH signals are also separately shown, normalized to 50 times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the leading lepton $p_{T}$ in the $t\bar{t}$ CR. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also shown separately, normalized to $10^{3}$ times the best fit of the signal yield. The last bin includes the overflow. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the third lepton $p_{T}$ in the $t\bar{t}$ CR. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also shown separately, normalized to $10^{3}$ times the best fit of the signal yield. The last bin includes the overflow. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the leading lepton $p_{T}$ in the $t\bar{t}Z$ CR. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also shown separately, normalized to $10^{3}$ times the best fit of the signal yield. The last bin includes the overflow. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Comparison between data and background prediction after the fit to data (Post-Fit) for the FCNC tZu LH coupling extraction. The distribution is for the $D_{1}$ discriminant in the $t\bar{t}Z$ CR. The uncertainty band includes both the statistical and systematic uncertainties in the background prediction. The FCNC tZu LH signals are also shown separately, normalized to $10^{3}$ times the best fit of the signal yield. The lower panels show the ratios of the data (Data) to the background prediction (Bkg.).
Several extensions of the Standard Model predict the production of dark matter particles at the LHC. A search for dark matter particles produced in association with a dark Higgs boson decaying into $W^{+}W^{-}$ in the $\ell^\pm\nu q \bar q'$ final states with $\ell=e,\mu$ is presented. This analysis uses 139 fb$^{-1}$ of $pp$ collisions recorded by the ATLAS detector at a centre-of-mass energy of 13 TeV. The $W^\pm \to q\bar q'$ decays are reconstructed from pairs of calorimeter-measured jets or from track-assisted reclustered jets, a technique aimed at resolving the dense topology from a pair of boosted quarks using jets in the calorimeter and tracking information. The observed data are found to agree with Standard Model predictions. Scenarios with dark Higgs boson masses ranging between 140 and 390 GeV are excluded.
Probability of finding at least one TAR jet, where the p<sub>T</sub>-leading TAR jet passes the m<sub>Wcand</sub> and D<sub>2</sub><sup>β=1</sup> requirements, as a function of m<sub>s</sub>. The probability is determined in a sample of signal events with m<sub>Z'</sub>=500 GeV, with the preselections applied.
Probability of finding at least one TAR jet, where the p<sub>T</sub>-leading TAR jet passes the m<sub>Wcand</sub> and D<sub>2</sub><sup>β=1</sup> requirements, as a function of m<sub>s</sub>. The probability is determined in a sample of signal events with m<sub>Z'</sub>=1000 GeV, with the preselections applied.
Probability of finding at least one TAR jet, where the p<sub>T</sub>-leading TAR jet passes the m<sub>Wcand</sub> and D<sub>2</sub><sup>β=1</sup> requirements, as a function of m<sub>s</sub>. The probability is determined in a sample of signal events with m<sub>Z'</sub>=1700 GeV, with the preselections applied.
Probability of finding at least one TAR jet, where the p<sub>T</sub>-leading TAR jet passes the m<sub>Wcand</sub> and D<sub>2</sub><sup>β=1</sup> requirements, as a function of m<sub>s</sub>. The probability is determined in a sample of signal events with m<sub>Z'</sub>=2100 GeV, with the preselections applied.
Probability of finding a W<sub>had</sub> candidate reconstructed as a pair of R=0.4 PFlow jets, as a function of m<sub>s</sub>. The probability is determined in a sample of signal events with m<sub>Z'</sub>=500 GeV, with the preselections applied that do not pass the requirements of the merged category.
Probability of finding a W<sub>had</sub> candidate reconstructed as a pair of R=0.4 PFlow jets, as a function of m<sub>s</sub>. The probability is determined in a sample of signal events with m<sub>Z'</sub>=1000 GeV, with the preselections applied that do not pass the requirements of the merged category.
Probability of finding a W<sub>had</sub> candidate reconstructed as a pair of R=0.4 PFlow jets, as a function of m<sub>s</sub>. The probability is determined in a sample of signal events with m<sub>Z'</sub>=1700 GeV, with the preselections applied that do not pass the requirements of the merged category.
Probability of finding a W<sub>had</sub> candidate reconstructed as a pair of R=0.4 PFlow jets, as a function of m<sub>s</sub>. The probability is determined in a sample of signal events with m<sub>Z'</sub>=2100 GeV, with the preselections applied that do not pass the requirements of the merged category.
Observed exclusion contour at 95% C.L. for the dark Higgs model in the (m<sub>Z'</sub>, m<sub>s</sub>) plane for g<sub>q</sub>=0.25, g<sub>χ</sub>=1, m<sub>χ</sub>=200 GeV, and sinθ=0.01.
Expected exclusion contour at 95% C.L. for the dark Higgs model in the (m<sub>Z'</sub>, m<sub>s</sub>) plane for g<sub>q</sub>=0.25, g<sub>χ</sub>=1, m<sub>χ</sub>=200 GeV, and sinθ=0.01.
Expected+1σ exclusion contour at 95% C.L. for the dark Higgs model in the (m<sub>Z'</sub>, m<sub>s</sub>) plane for g<sub>q</sub>=0.25, g<sub>χ</sub>=1, m<sub>χ</sub>=200 GeV, and sinθ=0.01.
Expected-1σ exclusion contour at 95% C.L. for the dark Higgs model in the (m<sub>Z'</sub>, m<sub>s</sub>) plane for g<sub>q</sub>=0.25, g<sub>χ</sub>=1, m<sub>χ</sub>=200 GeV, and sinθ=0.01.
Expected+2σ exclusion contour at 95% C.L. for the dark Higgs model in the (m<sub>Z'</sub>, m<sub>s</sub>) plane for g<sub>q</sub>=0.25, g<sub>χ</sub>=1, m<sub>χ</sub>=200 GeV, and sinθ=0.01.
Expected-2σ exclusion contour at 95% C.L. for the dark Higgs model in the (m<sub>Z'</sub>, m<sub>s</sub>) plane for g<sub>q</sub>=0.25, g<sub>χ</sub>=1, m<sub>χ</sub>=200 GeV, and sinθ=0.01.
Observed upper limits at 95% C.L. on σ(pp → s χχ) × B(s → W<sup>±</sup> W<sup>∓</sup>) for m<sub>Z'</sub>=0.5 TeV as a function of m<sub>s</sub>. The expected limits, varied up and down by one and two standard deviations, are shown as green and yellow bands, respectively. The observed and expected limits are compared to the theoretical LO cross section for the σ(pp → s χχ) × B(s → W<sup>±</sup> W<sup>∓</sup>) process for m<sub>Z'</sub>=0.5 TeV, shown in dashed blue.
Observed upper limits at 95% C.L. on σ(pp → s χχ) × B(s → W<sup>±</sup> W<sup>∓</sup>) for m<sub>Z'</sub>=1 TeV as a function of m<sub>s</sub>. The expected limits, varied up and down by one and two standard deviations, are shown as green and yellow bands, respectively. The observed and expected limits are compared to the theoretical LO cross section for the σ(pp → s χχ) × B(s → W<sup>±</sup> W<sup>∓</sup>) process for m<sub>Z'</sub>=1 TeV, shown in dashed blue.
Observed upper limits at 95% C.L. on σ(pp → s χχ) × B(s → W<sup>±</sup> W<sup>∓</sup>) for m<sub>Z'</sub>=1.7 TeV as a function of m<sub>s</sub>. The expected limits, varied up and down by one and two standard deviations, are shown as green and yellow bands, respectively. The observed and expected limits are compared to the theoretical LO cross section for the σ(pp → s χχ) × B(s → W<sup>±</sup> W<sup>∓</sup>) process for m<sub>Z'</sub>=1.7 TeV, shown in dashed blue.
Observed upper limits at 95% C.L. on σ(pp → s χχ) × B(s → W<sup>±</sup> W<sup>∓</sup>) for m<sub>Z'</sub>=2.1 TeV as a function of m<sub>s</sub>. The expected limits, varied up and down by one and two standard deviations, are shown as green and yellow bands, respectively. The observed and expected limits are compared to the theoretical LO cross section for the σ(pp → s χχ) × B(s → W<sup>±</sup> W<sup>∓</sup>) process for m<sub>Z'</sub>=2.1 TeV, shown in dashed blue.
Data overlaid on SM background yields stacked in each SR and CR category after the fit to data ('Post-fit'). The yields in the SR are broken down into their contributions to the individual bins. The maximum-likelihood estimators are set to the conditional values of the CR-only fit, and propagated to SR and CRs.
Dominant sources of uncertainty for three dark Higgs scenarios after the fit to data. The uncertainties are quantified in terms of their contribution to the fitted signal uncertainty that is expressed relative to the theory prediction. Three representative dark Higgs signal scenarios with g<sub>q</sub>=0.25, g<sub>χ</sub>=1.0, sinθ=0.01 and m<sub>χ</sub>=200 GeV are considered, which are indicated using the (m<sub>Z'</sub>, m<sub>s</sub>) format in units of GeV in the table columns.
Cumulative efficiencies in the merged category for three representative dark Higgs signal scenarios with g<sub>q</sub>=0.25, g<sub>&chi</sub>;=1.0, sinθ=0.01, m<sub>Z'</sub> = 1 TeV, and m<sub>χ</sub>=200 GeV considering s→W(ℓν)W(qq) decays only.
Cumulative efficiencies in the resolved category for three representative dark Higgs signal scenarios with g<sub>q</sub>=0.25, g<sub>&chi</sub>;=1.0, sinθ=0.01, m<sub>Z'</sub> = 1 TeV, and m<sub>χ</sub>=200 GeV considering s→W(ℓν)W(qq) decays only.
Theoretical cross section for σ(pp → sχχ) × B(s → W<sup>±</sup>W<sup>∓</sup>) for each of the dark Higgs signal points at m<sub>Z′</sub> ={300, 350, 400, 500, 750} GeV, with g<sub>q</sub> = 0.25, g<sub>χ = 1.0, sinθ = 0.01, m<sub>Z′</sub> = 1 TeV , and m<sub>χ</sub> = 200 GeV. Also shown are experimentally excluded cross sections of σ(pp → sχχ) × B(s → W<sup>±</sup>W<sup>∓</sup>) (Obs.) together with the expectations (Exp.) varied up and down by one standard deviation (±1σ).
Theoretical cross section for σ(pp → sχχ) × B(s → W<sup>±</sup>W<sup>∓</sup>) for each of the dark Higgs signal points at m<sub>Z′</sub> ={1000, 1700} GeV, with g<sub>q</sub> = 0.25, g<sub>χ = 1.0, sinθ = 0.01, m<sub>Z′</sub> = 1 TeV , and m<sub>χ</sub> = 200 GeV. Also shown are experimentally excluded cross sections of σ(pp → sχχ) × B(s → W<sup>±</sup>W<sup>∓</sup>) (Obs.) together with the expectations (Exp.) varied up and down by one standard deviation (±1σ).
Theoretical cross section for σ(pp → sχχ) × B(s → W<sup>±</sup>W<sup>∓</sup>) for each of the dark Higgs signal points at m<sub>Z′</sub> ={2100, 2500, 2900, 3300} GeV, with g<sub>q</sub> = 0.25, g<sub>χ = 1.0, sinθ = 0.01, m<sub>Z′</sub> = 1 TeV , and m<sub>χ</sub> = 200 GeV. Also shown are experimentally excluded cross sections of σ(pp → sχχ) × B(s → W<sup>±</sup>W<sup>∓</sup>) (Obs.) together with the expectations (Exp.) varied up and down by one standard deviation (±1σ).
Measurements of the suppression and correlations of dijets is performed using 3 $\mu$b$^{-1}$ of Xe+Xe data at $\sqrt{s_{\mathrm{NN}}} = 5.44$ TeV collected with the ATLAS detector at the LHC. Dijets with jets reconstructed using the $R=0.4$ anti-$k_t$ algorithm are measured differentially in jet $p_{\text{T}}$ over the range of 32 GeV to 398 GeV and the centrality of the collisions. Significant dijet momentum imbalance is found in the most central Xe+Xe collisions, which decreases in more peripheral collisions. Results from the measurement of per-pair normalized and absolutely normalized dijet $p_{\text{T}}$ balance are compared with previous Pb+Pb measurements at $\sqrt{s_{\mathrm{NN}}} =5.02$ TeV. The differences between the dijet suppression in Xe+Xe and Pb+Pb are further quantified by the ratio of pair nuclear-modification factors. The results are found to be consistent with those measured in Pb+Pb data when compared in classes of the same event activity and when taking into account the difference between the center-of-mass energies of the initial parton scattering process in Xe+Xe and Pb+Pb collisions. These results should provide input for a better understanding of the role of energy density, system size, path length, and fluctuations in the parton energy loss.
The centrality intervals in Xe+Xe collisions and their corresponding TAA with absolute uncertainties.
The centrality intervals in Xe+Xe and Pb+Pb collisions for matching SUM ET FCAL intervals and respective TAA values for Xe+Xe collisions.
The performance of the jet energy scale (JES) for jets with $|y| < 2.1$ evaluated as a function of pT_truth in different centrality bins. Simulated hard scatter events were overlaid onto events from a dedicated sample of minimum-bias Xe+Xe data.
The performance of jet energy resolution (JER) for jets with |y| < 2.1 evaluated as a function of pT_truth in different centrality bins. Simulated hard scatter events were overlaid onto events from a dedicated sample of minimum-bias Xe+Xe data. The fit parameters are listed in a sperate table (Extras 1)
The relative magnitude of systematic uncertainties for per-pair normalized xJ distributions in 0-10% Xe+Xe centrality
The relative magnitude of systematic uncertainties for absolutely normalized xJ distributions in 0-10% Xe+Xe centrality
The relative magnitude of systematic uncertainties for rho distributions for leading jets in 0-10% Xe+Xe centrality
Per-pair normalized xJ distribution evaluated in four centrality intervals and given pT1 interval.
Per-pair normalized xJ distribution evaluated in four centrality intervals and given pT1 interval.
Per-pair normalized xJ distribution evaluated in four centrality intervals and given pT1 interval.
Absolutely normalized xJ distribution evaluated in four centrality intervals and given pT1 interval.
Absolutely normalized xJ distribution evaluated in four centrality intervals and given pT1 interval.
Absolutely normalized xJ distribution evaluated in four centrality intervals and given pT1 interval.
Per-pair normalized xJ distribution in Xe+Xe collisions.
Per-pair normalized xJ distribution in Pb+Pb collisions.
Per-pair normalized xJ distribution in Xe+Xe collisions.
Per-pair normalized xJ distribution in Pb+Pb collisions.
Per-pair normalized xJ distribution in Xe+Xe collisions.
Per-pair normalized xJ distribution in Pb+Pb collisions.
Absolutely normalized xJ distribution in Xe+Xe collisions.
Absolutely normalized xJ distribution in Xe+Xe collisions.
Absolutely normalized xJ distribution in Xe+Xe collisions.
Absolutely normalized xJ distribution in Xe+Xe collisions.
Absolutely normalized xJ distribution in Xe+Xe collisions.
Absolutely normalized xJ distribution in Xe+Xe collisions.
The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of leading jet pT in the same centrality intervals.
The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of leading jet pT in the same centrality intervals.
The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of leading jet pT in the same centrality intervals.
The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of subleading jet pT in the same centrality intervals.
The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of subleading jet pT in the same centrality intervals.
The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of subleading jet pT in the same centrality intervals.
The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of leading jet pT in the same SUM ETFCal intervals (selecting equivalent event activity)
The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of leading jet pT in the same SUM ETFCal intervals (selecting equivalent event activity)
The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of leading jet pT in the same SUM ETFCal intervals (selecting equivalent event activity)
The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of subleading jet pT in the same SUM ETFCal intervals (selecting equivalent event activity)
The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of subleading jet pT in the same SUM ETFCal intervals (selecting equivalent event activity)
The ratios of Xe+Xe and Pb+Pb pair nuclear-modification factors, rho, evaluated as a function of subleading jet pT in the same SUM ETFCal intervals (selecting equivalent event activity)
Parameter a,b, and c from JER fits in Figure 1b.
Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.
Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.
Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.
Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.
Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.
Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.
Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.
Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.
Per-pair normalized xJ distribution in Xe+Xe collisions for selected Pb+Pb centrality and pT1 bin.
Measurements of distributions of charged particles produced in proton-proton collisions with a centre-of-mass energy of 13 TeV are presented. The data were recorded by the ATLAS detector at the LHC and correspond to an integrated luminosity of 151 $\mu$b$^{-1}$. The particles are required to have a transverse momentum greater than 100 MeV and an absolute pseudorapidity less than 2.5. The charged-particle multiplicity, its dependence on transverse momentum and pseudorapidity and the dependence of the mean transverse momentum on multiplicity are measured in events containing at least two charged particles satisfying the above kinematic criteria. The results are corrected for detector effects and compared to the predictions from several Monte Carlo event generators.
The average charged-particle muliplicity per unit of rapidity for ETARAP=0 as a function of the centre-of-mass energy.
The average charged-particle muliplicity per unit of rapidity for ETARAP=0 as a function of the centre-of-mass energy.
The extrapolated ($\tau > 30$ ps) average charged-particle muliplicity per unit of rapidity for ETARAP=0 as a function of the centre-of-mass energy.
The extrapolated ($\tau > 30$ ps) average charged-particle muliplicity per unit of rapidity for ETARAP=0 as a function of the centre-of-mass energy.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 13000 GeV as a function of pseudorapidity for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 13000 GeV as a function of pseudorapidity for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 13000 GeV as a function of transverse momentum for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 13000 GeV as a function of transverse momentum for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distribution in proton-proton collisions at a centre-of mass energy of 13000 GeV for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distribution in proton-proton collisions at a centre-of mass energy of 13000 GeV for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Average transverse momentum in proton-proton collisions at a centre-of mass energy of 13000 GeV as a function of the number of charged particles in the event for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Average transverse momentum in proton-proton collisions at a centre-of mass energy of 13000 GeV as a function of the number of charged particles in the event for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Extrapolated ($\tau > 30$ ps) charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 13000 GeV as a function of pseudorapidity for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Extrapolated ($\tau > 30$ ps) charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 13000 GeV as a function of pseudorapidity for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Extrapolated ($\tau > 30$ ps) charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 13000 GeV as a function of transverse momentum for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Extrapolated ($\tau > 30$ ps) charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 13000 GeV as a function of transverse momentum for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Extrapolated ($\tau > 30$ ps) charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 13000 GeV for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Extrapolated ($\tau > 30$ ps) charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 13000 GeV for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Extrapolated ($\tau > 30$ ps) average transverse momentum in proton-proton collisions at a centre-of mass energy of 13000 GeV as a function of the number of charged particles in the event for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Extrapolated ($\tau > 30$ ps) average transverse momentum in proton-proton collisions at a centre-of mass energy of 13000 GeV as a function of the number of charged particles in the event for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Inclusive and differential measurements of the top-antitop ($t\bar{t}$) charge asymmetry $A_\text{C}^{t\bar{t}}$ and the leptonic asymmetry $A_\text{C}^{\ell\bar{\ell}}$ are presented in proton-proton collisions at $\sqrt{s} = 13$ TeV recorded by the ATLAS experiment at the CERN Large Hadron Collider. The measurement uses the complete Run 2 dataset, corresponding to an integrated luminosity of 139 fb$^{-1}$, combines data in the single-lepton and dilepton channels, and employs reconstruction techniques adapted to both the resolved and boosted topologies. A Bayesian unfolding procedure is performed to correct for detector resolution and acceptance effects. The combined inclusive $t\bar{t}$ charge asymmetry is measured to be $A_\text{C}^{t\bar{t}} = 0.0068 \pm 0.0015$, which differs from zero by 4.7 standard deviations. Differential measurements are performed as a function of the invariant mass, transverse momentum and longitudinal boost of the $t\bar{t}$ system. Both the inclusive and differential measurements are found to be compatible with the Standard Model predictions, at next-to-next-to-leading order in quantum chromodynamics perturbation theory with next-to-leading-order electroweak corrections. The measurements are interpreted in the framework of the Standard Model effective field theory, placing competitive bounds on several Wilson coefficients.
- - - - - - - - Overview of HEPData Record - - - - - - - - <br/><br/> <b>Results:</b> <ul> <li><a href="132116?version=1&table=Resultsforchargeasymmetryinclusive">$A_C^{t\bar{t}}$</a> <li><a href="132116?version=1&table=Resultsforchargeasymmetryvsmtt">$A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$</a> <li><a href="132116?version=1&table=Resultsforchargeasymmetryvspttt">$A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$</a> <li><a href="132116?version=1&table=Resultsforchargeasymmetryvsbetatt">$A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$</a> <li><a href="132116?version=1&table=Resultsforleptonicchargeasymmetryinclusive">$A_C^{\ell\bar{\ell}}$</a> <li><a href="132116?version=1&table=Resultsforchargeasymmetryvsllmll">$A_C^{\ell\bar{\ell}}$ vs $m_{\ell\bar{\ell}}$</a> <li><a href="132116?version=1&table=Resultsforchargeasymmetryvsllptll">$A_C^{\ell\bar{\ell}}$ vs $p_{T,\ell\bar{\ell}}$</a> <li><a href="132116?version=1&table=Resultsforchargeasymmetryvsllbetall">$A_C^{\ell\bar{\ell}}$ vs $\beta_{z,\ell\bar{\ell}}$</a> </ul> <b>Bounds on the Wilson coefficients:</b> <ul> <li><a href="132116?version=1&table=BoundsonWilsoncoefficientschargeasymmetryinclusive">$A_C^{t\bar{t}}$</a> <li><a href="132116?version=1&table=BoundsonWilsoncoefficientschargeasymmetryvsmtt">$A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$</a> </ul> <b>Ranking of systematic uncertainties:</b></br> Inclusive:<a href="132116?version=1&table=NPrankingchargeasymmetryinclusive">$A_C^{t\bar{t}}$</a></br> <b>$A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$:</b> <ul> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsbetattbin0">$\beta_{z,t\bar{t}} \in[0,0.3]$</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsbetattbin1">$\beta_{z,t\bar{t}} \in[0.3,0.6]$</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsbetattbin2">$\beta_{z,t\bar{t}} \in[0.6,0.8]$</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsbetattbin3">$\beta_{z,t\bar{t}} \in[0.8,1]$</a> </ul> <b>$A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$:</b> <ul> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsmttbin0">$m_{t\bar{t}}$ < $500$GeV</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsmttbin1">$m_{t\bar{t}} \in [500,750]$GeV</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsmttbin2">$m_{t\bar{t}} \in [750,1000]$GeV</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsmttbin3">$m_{t\bar{t}} \in [1000,1500]$GeV</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsmttbin4">$m_{t\bar{t}}$ > $1500$GeV</a> </ul> <b>$A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$:</b> <ul> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsptttbin0">$p_{T,t\bar{t}} \in [0,30]$GeV</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsptttbin1">$p_{T,t\bar{t}} \in[30,120]$GeV</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsptttbin2">$p_{T,t\bar{t}}$ > $120$GeV</a> </ul> Inclusive leptonic:<a href="132116?version=1&table=NPrankingleptonicchargeasymmetryinclusive">$A_C^{\ell\bar{\ell}}$</a></br> <b>$A_C^{\ell\bar{\ell}}$ vs $\beta_{z,\ell\bar{\ell}}$</b> <ul> <li><a href="132116?version=1&tableNPrankingchargeasymmetry=vsllbetallbin0">$\beta_{z,\ell\bar{\ell}} \in [0,0.3]$</a> <li><a href="132116?version=1&tableNPrankingchargeasymmetry=vsllbetallbin1">$\beta_{z,\ell\bar{\ell}} \in [0.3,0.6]$</a> <li><a href="132116?version=1&tableNPrankingchargeasymmetry=vsllbetallbin2">$\beta_{z,\ell\bar{\ell}} \in [0.6,0.8]$</a> <li><a href="132116?version=1&tableNPrankingchargeasymmetry=vsllbetallbin3">$\beta_{z,\ell\bar{\ell}} \in [0.8,1]$</a> </ul> <b>$A_C^{\ell\bar{\ell}}$ vs $m_{\ell\bar{\ell}}$</b> <ul> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsllmllbin0">$m_{\ell\bar{\ell}}$ < $200$GeV</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsllmllbin1">$m_{\ell\bar{\ell}} \in [200,300]$GeV</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsllmllbin2">$m_{\ell\bar{\ell}} \in [300,400]$Ge$</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsllmllbin3">$m_{\ell\bar{\ell}}$ > $400$GeV</a> </ul> <b>$A_C^{\ell\bar{\ell}}$ vs $p_{T,\ell\bar{\ell}}$</b> <ul> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsllptllbin0">$p_{T,\ell\bar{\ell}}\in [0,20]$GeV</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsllptllbin1">$p_{T,\ell\bar{\ell}}\in[20,70]$GeV</a> <li><a href="132116?version=1&table=NPrankingchargeasymmetryvsllptllbin2">$p_{T,\ell\bar{\ell}}$ > $70$GeV</a> </ul> <b>NP correlations:</b> <ul> <li><a href="132116?version=1&table=NPcorrelationschargeasymmetryinclusive">$A_C^{t\bar{t}}$</a> <li><a href="132116?version=1&table=NPcorrelationschargeasymmetryvsmtt">$A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$</a> <li><a href="132116?version=1&table=NPcorrelationschargeasymmetryvspttt">$A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$</a> <li><a href="132116?version=1&table=NPcorrelationschargeasymmetryvsbetatt">$A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$</a> <li><a href="132116?version=1&table=NPcorrelationsleptonicchargeasymmetryinclusive">$A_c^{\ell\bar{\ell}}$</a> <li><a href="132116?version=1&table=NPcorrelationschargeasymmetryvsllmll">$A_c^{\ell\bar{\ell}}$ vs $m_{\ell\bar{\ell}}$</a> <li><a href="132116?version=1&table=NPcorrelationschargeasymmetryvsllptll">$A_C^{\ell\bar{\ell}}$ vs $p_{T,\ell\bar{\ell}}$</a> <li><a href="132116?version=1&table=NPcorrelationschargeasymmetryvsllbetall">$A_C^{\ell\bar{\ell}}$ vs $\beta_{z,\ell\bar{\ell}}$</a> </ul> <b>Covariance matrices:</b> <ul> <li><a href="132116?version=1&table=Covariancematrixchargeasymmetryvsmtt">$A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$</a> <li><a href="132116?version=1&table=Covariancematrixchargeasymmetryvspttt">$A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$</a> <li><a href="132116?version=1&table=Covariancematrixchargeasymmetryvsbetatt">$A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$</a> <li><a href="132116?version=1&table=Covariancematrixleptonicchargeasymmetryvsllmll">$A_c^{\ell\bar{\ell}}$ vs $m_{\ell\bar{\ell}}$</a> <li><a href="132116?version=1&table=Covariancematrixleptonicchargeasymmetryvsllptll">$A_C^{\ell\bar{\ell}}$ vs $p_{T,\ell\bar{\ell}}$</a> <li><a href="132116?version=1&table=Covariancematrixleptonicchargeasymmetryvsllbetall">$A_C^{\ell\bar{\ell}}$ vs $\beta_{z,\ell\bar{\ell}}$</a> </ul>
The unfolded inclusive charge asymmetry. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NNLO in QCD and NLO in EW theory are listed, and the impact of the linear term of the Wilson coefficient on the $A_C^{t\bar{t}}$ prediction is shown for two different values. The scale uncertainty is obtained by varying renormalisation and factorisation scales independently by a factor of 2 or 0.5 around $\mu_0$ to calculate the maximum and minimum value of the asymmetry, respectively. The nominal value $\mu_0$ is chosen as $H_T/4$. The variations in which one scale is multiplied by 2 while the other scale is divided by 2 are excluded. Finally, the scale and MC integration uncertainties are added in quadrature.
The unfolded differential charge asymmetry as a function of the invariant mass of the top pair system. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NNLO in QCD and NLO in EW theory are listed, and the impact of the linear term of the Wilson coefficient on the $A_C^{t\bar{t}}$ prediction is shown for two different values. The scale uncertainty is obtained by varying renormalisation and factorisation scales independently by a factor of 2 or 0.5 around $\mu_0$ to calculate the maximum and minimum value of the asymmetry, respectively. The nominal value $\mu_0$ is chosen as $H_T/4$. The variations in which one scale is multiplied by 2 while the other scale is divided by 2 are excluded. Finally, the scale and MC integration uncertainties are added in quadrature.
The unfolded differential charge asymmetry as a function of the transverse momentum of the top pair system. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NNLO in QCD and NLO in EW theory are listed. The scale uncertainty is obtained by varying renormalisation and factorisation scales independently by a factor of 2 or 0.5 around $\mu_0$ to calculate the maximum and minimum value of the asymmetry, respectively. The nominal value $\mu_0$ is chosen as $H_T/4$. The variations in which one scale is multiplied by 2 while the other scale is divided by 2 are excluded. Finally, the scale and MC integration uncertainties are added in quadrature.
The unfolded differential charge asymmetry as a function of the longitudinal boost of the top pair system. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NNLO in QCD and NLO in EW theory are listed. The scale uncertainty is obtained by varying renormalisation and factorisation scales independently by a factor of 2 or 0.5 around $\mu_0$ to calculate the maximum and minimum value of the asymmetry, respectively. The nominal value $\mu_0$ is chosen as $H_T/4$. The variations in which one scale is multiplied by 2 while the other scale is divided by 2 are excluded. Finally, the scale and MC integration uncertainties are added in quadrature.
The unfolded inclusive leptonic asymmetry. The unfolded $A_C^{\ell\bar{\ell}}$ is obtained in the reduced phase-space defined by the requirement $|\Delta |\eta_{\ell\bar{\ell}}||<2.5$. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NLO in QCD and NLO in EW theory are listed. The theory uncertainty is obtained by varying both scales by a factor of 0.5 or 2.0 to calculate the minimum and maximum value of the asymmetry, respectively.
The unfolded differential leptonic asymmetry as a function of the invariant mass of the di-lepton pair. The unfolded $A_C^{\ell\bar{\ell}}$ is obtained in the reduced phase-space defined by the requirement $|\Delta |\eta_{\ell\bar{\ell}}||<2.5$. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NLO in QCD and NLO in EW theory are listed. The theory uncertainty is obtained by varying both scales by a factor of 0.5 or 2.0 to calculate the minimum and maximum value of the asymmetry, respectively.
The unfolded differential leptonic asymmetry as a function of the transverse momentum of the di-lepton pair. The unfolded $A_C^{\ell\bar{\ell}}$ is obtained in the reduced phase-space defined by the requirement $|\Delta |\eta_{\ell\bar{\ell}}||<2.5$. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NLO in QCD and NLO in EW theory are listed. The theory uncertainty is obtained by varying both scales by a factor of 0.5 or 2.0 to calculate the minimum and maximum value of the asymmetry, respectively.
The unfolded differential leptonic asymmetry as a function of the longitudinal boost of the di-lepton pair. The unfolded $A_C^{\ell\bar{\ell}}$ is obtained in the reduced phase-space defined by the requirement $|\Delta |\eta_{\ell\bar{\ell}}||<2.5$. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NLO in QCD and NLO in EW theory are listed. The theory uncertainty is obtained by varying both scales by a factor of 0.5 or 2.0 to calculate the minimum and maximum value of the asymmetry, respectively.
Individual 68% and 95% CL bounds on the relevant Wilson coefficients of the SM Effective Field Theory in units of $\text{TeV}^{-2}$. The bounds are derived from the $A_C^{t\bar{t}}$ inclusive measurement. The experimental uncertainties are accounted for, in the form of the complete covariance matrix that keeps track of correlations between bins for the differential measurement. The theory uncertainty from the NNLO QCD + NLO EW calculation is included by explicitly varying the renormalization and factorization scales, or the parton density functions, in the calculation and registering the variations in the intervals.
Individual 68% and 95% CL bounds on the relevant Wilson coefficients of the SM Effective Field Theory in units of $\text{TeV}^{-2}$. The bounds are derived from the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement. The experimental uncertainties are accounted for, in the form of the complete covariance matrix that keeps track of correlations between bins for the differential measurement. The theory uncertainty from the NNLO QCD + NLO EW calculation is included by explicitly varying the renormalization and factorization scales, or the parton density functions, in the calculation and registering the variations in the intervals.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ inclusive measurement. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$ measurement for $\beta_{z,t\bar{t}}$ $\in$ [0,0.3]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$ measurement for $\beta_{z,t\bar{t}}$ $\in$ [0.3,0.6]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$ measurement for $\beta_{z,t\bar{t}}$ $\in$ [0.6,0.8]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$ measurement for $\beta_{z,t\bar{t}}$ $\in$ [0.8,1]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement for $m_{t\bar{t}}$ < 500 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement for $m_{t\bar{t}}$ $\in$ [500,750] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement for $m_{t\bar{t}}$ $\in$ [750,1000] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement for $m_{t\bar{t}}$ $\in$ [1000,1500] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement for $m_{t\bar{t}}$ > 1500 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$ measurement for $p_{T,t\bar{t}}$ < 30 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$ measurement for $p_{T,t\bar{t}}$ $\in$ [30,120] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$ measurement for $p_{T,t\bar{t}}$ > 120 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ inclusive measurement. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $\beta_{z,\ell\bar{\ell}}$ measurement for $\beta_{z,\ell\bar{\ell}}$ $\in$[0,0.3]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $\beta_{z,\ell\bar{\ell}}$ measurement for $\beta_{z,\ell\bar{\ell}}$ $\in$[0.3,0.6]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $\beta_{z,\ell\bar{\ell}}$ measurement for $\beta_{z,\ell\bar{\ell}}$ $\in$[0.6,0.8]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $\beta_{z,\ell\bar{\ell}}$ measurement for $\beta_{z,\ell\bar{\ell}}$ $\in$[0.8,1]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $m_{\ell\bar{\ell}}$ measurement for $m_{\ell\bar{\ell}}$ < 200 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $m_{\ell\bar{\ell}}$ measurement for $m_{\ell\bar{\ell}}$ $\in$ [200,300] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $m_{\ell\bar{\ell}}$ measurement for $m_{\ell\bar{\ell}}$ $\in$ [300,400] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $m_{\ell\bar{\ell}}$ measurement for $m_{\ell\bar{\ell}}$ > 400 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $p_{T,\ell\bar{\ell}}$ measurement for $p_{T,\ell\bar{\ell}}$ < 20 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $p_{T,\ell\bar{\ell}}$ measurement for $p_{T,\ell\bar{\ell}}$ $\in$ [20, 70] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $p_{T,\ell\bar{\ell}}$ measurement for $p_{T,\ell\bar{\ell}}$ > 70 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.
Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{t\bar{t}}$ inclusive measurement. Only $|\rho_{ij}| > 0.05$ values are included.
Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement. Only $|\rho_{ij}| > 0.05$ values are included.
Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$ measurement. Only $|\rho_{ij}| > 0.05$ values are included.
Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$ measurement. Only $|\rho_{ij}| > 0.05$ values are included.
Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{\ell\ell}$ inclusive measurement. Only $|\rho_{ij}| > 0.05$ values are included.
Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{\ell\ell}$ vs $m_{\ell\bar{\ell}}$ measurement. Only $|\rho_{ij}| > 0.05$ values are included.
Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{\ell\ell}$ vs $p_{T,\ell\bar{\ell}}$ measurement. Only $|\rho_{ij}| > 0.05$ values are included.
Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{\ell\ell}$ vs $\beta_{z,\ell\bar{\ell}}$ measurement. Only $|\rho_{ij}| > 0.05$ values are included.
Covariance matrix for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement.
Covariance matrix for the $A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$ measurement.
Covariance matrix for the $A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$ measurement.
Covariance matrix for the $A_C^{\ell\ell}$ vs $m_{\ell\bar{\ell}}$ measurement.
Covariance matrix for the $A_C^{\ell\ell}$ vs $p_{T,\ell\bar{\ell}}$ measurement.
Covariance matrix for the $A_C^{\ell\ell}$ vs $\beta_{z,\ell\bar{\ell}}$ measurement.
Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, $H\rightarrow\gamma\gamma$, $H\rightarrow ZZ^{*}\rightarrow 4 \ell$ and $H\rightarrow W W \rightarrow \ell\nu\ell\nu$. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of 7 TeV and 8 TeV, corresponding to an integrated luminosity of about 25 fb$^{-1}$. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson.
-2 log Likelihood in the $(\mu^f_{{\mathrm{{ggF}}+ttH}}, \mu^f_{{\mathrm{{VBF}}+VH}})$ plane for the $f=H\to \gamma\gamma$ channel and a Higgs boson mass $m_H = 125.5$ GeV. The original plain-text and ROOT files from <a href="https://doi.org/10.7484/inspirehep.data.a78c.hk44">10.7484/inspirehep.data.a78c.hk44</a> are accessible by clicking "Resources".
-2 log Likelihood in the $(\mu^f_{{\mathrm{{ggF}}+ttH}}, \mu^f_{{\mathrm{{VBF}}+VH}})$ plane for the $f=H\to ZZ^*\to 4\ell$ channel and a Higgs boson mass $m_H = 125.5$ GeV. The sharp lower edge is due to the small number of events in this channel and the requirement of a positive pdf. The original plain-text and ROOT files from <a href="https://doi.org/10.7484/inspirehep.data.rf5p.6m3k">10.7484/inspirehep.data.rf5p.6m3k</a> are accessible by clicking "Resources".
-2 log Likelihood in the $(\mu^f_{{\mathrm{{ggF}}+ttH}}, \mu^f_{{\mathrm{{VBF}}+VH}})$ plane for the $f=H\to WW^*\to\ell\nu\ell\nu$ channel and a Higgs boson mass $m_H = 125.5$ GeV. The original plain-text and ROOT files from <a href="https://doi.org/10.7484/inspirehep.data.26b4.ty5f">10.7484/inspirehep.data.26b4.ty5f</a> are accessible by clicking "Resources".
This article presents measurements of the $t$-channel single top-quark ($t$) and top-antiquark ($\bar{t}$) total production cross sections $\sigma(tq)$ and $\sigma(\bar{t}q)$, their ratio $R_{t}=\sigma(tq)/\sigma(\bar{t}q)$, and a measurement of the inclusive production cross section $\sigma(tq + \bar{t}q)$ in proton--proton collisions at $\sqrt{s} = 7$ TeV at the LHC. Differential cross sections for the $tq$ and $\bar{t}q$ processes are measured as a function of the transverse momentum and the absolute value of the rapidity of $t$ and $\bar{t}$, respectively. The analyzed data set was recorded with the ATLAS detector and corresponds to an integrated luminosity of 4.59 fb$^{-1}$. Selected events contain one charged lepton, large missing transverse momentum, and two or three jets. The cross sections are measured by performing a binned maximum-likelihood fit to the output distributions of neural networks. The resulting measurements are $\sigma(tq)= 46\pm 6\; \mathrm{pb}$, $\sigma(\bar{t}q)= 23 \pm 4\; \mathrm{pb}$, $R_{t}=2.04\pm 0.18$, and $\sigma(tq + \bar{t}q)= 68 \pm 8\; \mathrm{pb}$, consistent with the Standard Model expectation. The uncertainty on the measured cross sections is dominated by systematic uncertainties, while the uncertainty on $R_{t}$ is mainly statistical. Using the ratio of $\sigma(tq + \bar{t}q)$ to its theoretical prediction, and assuming that the top-quark-related CKM matrix elements obey the relation $|V_{tb}|\gg |V_{ts}|, |V_{td}|$, we determine $|V_{tb}|=1.02 \pm 0.07$.
Differential t-channel top-quark production cross sections and normalized differential t-channel top-quark production cross sections as functions of PT(TOP).
Predicted and observed events yields for the 2-jet and 3-jet channels considered in this measurement. The multijet background is estimated using data-driven techniques (see Sec. VB); an uncertainty of $50\%$ is applied. All the other expectations are derived using theoretical cross sections and their uncertainties (see Secs. VA and VC in the paper).
Differential t-channel top-quark production cross sections and normalized differential t-channel top-quark production cross sections as functions of PT(TOPBAR).
Detailed list of the contribution of each source of uncertainty to the total uncertainty on the measured values of $\sigma(tq)$, $\sigma(\bar{t}q)$, $R_t$, and $\sigma(tq+\bar{t}q)$. The evaluation of the systematic uncertainties has a statistical uncertainty of $0.3\,\%$. Uncertainties contributing less than $1.0\,\%$ are marked with "$<1$" in the paper. To provide numerical values for this table in HEPdata, these uncertainties are approximated with $\pm 0.5\,\%$. This approximation is applied to all measurements for the following uncertainties$:$ JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by-jets, JES pileup, $b$-JES, jet vertex fraction, mistag efficiency and $W+\;$jets shape variation. For the measurement of $\sigma(tq)$ the approximation is applied in addition to the following uncertainties$:$ JES flavor response, $c$-tagging efficiency, $t\bar{t}$ generator + parton shower and $t\bar{t}$ ISR/FSR. For the measurement of $\sigma(\bar{t}q)$ the approximation is applied in addition to these uncertainties$:$ JES flavor response, $b/\bar{b}$ acceptance, and $t\bar{t}$ ISR/FSR. For the measurement of $R_t$ the approximation is applied in addition to these uncertainties$:$ JES detector, $b$-tagging efficiency, $c$-tagging efficiency, $b/\bar{b}$ acceptance and $tq$ scale variations. For the measurement of $\sigma(tq+\bar{t}q)$ the approximation is applied in addition to these uncertainties$:$ JES flavor response, $c$-tagging efficiency, $b/\bar{b}$ acceptance, $t\bar{t}$ generator + parton shower and $t\bar{t}$ ISR/FSR.
Differential t-channel top-quark production cross sections and normalized differential t-channel top-quark production cross sections as functions of ABS(YRAP(T)).
The cross sections for top-quark and top-antiquark production in the t-channel, together with the cross-section ratio.
Differential t-channel top-quark production cross sections and normalized differential t-channel top-quark production cross sections as functions of ABS(YRAP(TBAR)).
Parametrization factors for the $m_{t}$ dependence [see Eq. (4) in the paper] of $\sigma(tq)$, $\sigma(\bar tq)$, and $\sigma(t q+\bar t q)$.
The cross sections for top-quark and top-antiquark production in the t-channel, together with the cross-section ratio.
The value of $|V_{tb}|^{2}$ is extracted by dividing the measured value of $\sigma(t q+\bar t q)$ by the prediction of the approximate NNLO calculation. The experimental and theoretical uncertainties are added in quadrature.
Event yields for the 2-jet-$\ell^{+}$ and 2-jet-$\ell^{-}$ HPR channels. The expectation for the signal and background yields correspond to the result of the binned maximum-likelihood fit described in Sec. $\mathrm{VI~D}$ in the paper. The uncertainty of the expectations is the normalization uncertainty of each process after the fit, as described in Sec. $\mathrm{VII~F}$ in the paper.
Migration matrix relating the parton level $p_{\mathrm{T}}(t)$ shown on the $y$ axis and the reconstruction level $p_{\mathrm{T}}(\ell \nu b)$ shown on the $x$ axis for the top-quark $p_{\mathrm{T}}$ distribution.
Migration matrix relating the parton level $p_{\mathrm{T}}(\bar t)$ shown on the $y$ axis and the reconstruction level $p_{\mathrm{T}}(\ell \nu b)$ shown on the $x$ axis for the top-antiquark $p_{\mathrm{T}}$ distribution.
Migration matrix relating the parton level $|y(t)|$ shown on the $y$ axis and the reconstruction level $|y(\ell \nu b)|$ shown on the $x$ axis for the top-quark $|y|$ distribution.
Migration matrix relating the parton level $|y(\bar t)|$ shown on the $y$ axis and the reconstruction level $|y(\ell \nu b)|$ shown on the $x$ axis for the top-antiquark $|y|$ distribution.
Differential t-channel top-quark production cross section as a function of $p_{\mathrm{T}}(t)$ with the uncertainties for each bin given in percent.
Differential t-channel top-quark production cross section as a function of $p_{\mathrm{T}}(\bar t)$ with the uncertainties for each bin given in percent.
Differential t-channel top-quark production cross section as a function of $|y(t)|$ with the uncertainties for each bin given in percent.
Differential t-channel top-quark production cross section as a function of $|y(\bar t)|$ with the uncertainties for each bin given in percent.
Normalized differential t-channel top-quark production cross section as a function of $p_{\mathrm{T}}(t)$ with the uncertainties for each bin given in percent.
Normalized differential t-channel top-quark production cross section as a function of $p_{\mathrm{T}}(\bar t)$ with the uncertainties for each bin given in percent.
Normalized differential t-channel top-quark production cross section as a function of $|y(t)|$ with the uncertainties for each bin given in percent.
Normalized differential t-channel top-quark production cross section as a function of $|y(\bar t)|$ with the uncertainties for each bin given in percent.
Comparison between the measured differential cross sections and the predictions from the NLO calculation using the MSTW2008 PDF set. For each variable and prediction a $\chi^{2}$ value is calculated with HERAfitter using the covariance matrix of each measured spectrum. The theory uncertainties of the predictions are treated as uncorrelated. The number of degrees of freedom (NDF) is equal to the number of bins in the measured spectrum.
Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{\mathrm{d}\sigma}{\mathrm{d}p_{\mathrm{T}}(t)}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, jet-vertex fraction, $b/\bar{b}$ acceptance, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, $W+$ jets shape variation, and $t \bar{t}$ generator. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.
Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{\mathrm{d}\sigma}{\mathrm{d}p_{\mathrm{T}}(\bar t)}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, $b-$JES, jet-vertex fraction, mistag efficiency, $b/\bar{b}$ acceptance, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, $W+$ jets shape variation, and $t \bar{t}$ generator. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.
Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{\mathrm{d}\sigma}{\mathrm{d}|y(t)|}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, jet-vertex fraction, $b/\bar{b}$ acceptance, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, $W+$ jets shape variation, $t \bar{t}$ generator, $t \bar{t}$ ISR/FSR, and unfolding. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.
Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{\mathrm{d}\sigma}{\mathrm{d}|y(\bar t)|}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, $b-$JES, jet-vertex fraction, $b/\bar{b}$ acceptance, mistag efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, $W+$ jets shape variation, $t \bar{t}$ generator, $t \bar{t}$ ISR/FSR, and unfolding. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.
Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{1}{\sigma}\dfrac{\mathrm{d}\sigma}{\mathrm{d}p_{\mathrm{T}}(t)}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The JES $\eta$ intercalibration uncertainty has a sign switch from the first to the second bin. For the $tq$ generator $+$ parton shower uncertainty a sign switch is denoted with $\mp$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, $b-$JES, jet-vertex fraction, $b/\bar{b}$ acceptance, $c-$tagging efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, lepton uncertainties, $W+$ jets shape variation, and $t \bar{t}$ generator. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.
Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{1}{\sigma}\dfrac{\mathrm{d}\sigma}{\mathrm{d}p_{\mathrm{T}}(\bar t)}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. Sign switches within one uncertainty are denoted with $\mp$ and $\pm$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, $b-$JES, jet-vertex fraction, $b/\bar{b}$ acceptance, mistag efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, lepton uncertainties, $W+$ jets shape variation, and $t \bar{t}$ generator. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.
Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{1}{\sigma}\dfrac{\mathrm{d}\sigma}{\mathrm{d}|y(t)|}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. Sign switches within one uncertainty are denoted with $\mp$ and $\pm$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, b-JES, jet-vertex fraction, $b/\bar{b}$ acceptance, $b-$tagging efficiency, $c-$tagging efficiency, mistag efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, lepton uncertainties, $W+$jets shape variation, $t \bar{t}$ generator, $t \bar{t}$ISR/FSR, and unfolding. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.
Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{1}{\sigma}\dfrac{\mathrm{d}\sigma}{\mathrm{d}|y(\bar t)|}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. Sign switches within one uncertainty are denoted with $\mp$ and $\pm$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content $:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, b-JES, jet energy resolution, jet-vertex fraction, $b/\bar{b}$ acceptance, $b-$tagging efficiency, $c-$ tagging efficiency, mistag efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, lepton uncertainties, $W+$ jets shape variation, $t \bar{t}$ generator, $t \bar{t}$ ISR/FSR, and unfolding. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.
Statistical correlation matrices for the differential cross section as a function of $p_{\mathrm{T}}(t)$.
Statistical correlation matrices for the differential cross section as a function of $p_{\mathrm{T}}(\bar t)$.
Statistical correlation matrices for the differential cross section as a function of $|y(t)|$.
Statistical correlation matrices for the differential cross section as a function of $|y(\bar t)|$.
Statistical correlation matrices for the normalized differential cross section as a function of $p_{\mathrm{T}}(t)$.
Statistical correlation matrices for the normalized differential cross section as a function of $p_{\mathrm{T}}(\bar t)$.
Statistical correlation matrices for the normalized differential cross section as a function of $|y(t)|$.
Statistical correlation matrices for the normalized differential cross section as a function of $|y(\bar t)|$.
A search for the supersymmetric partners of quarks and gluons (squarks and gluinos) in final states containing hadronic jets and missing transverse momentum, but no electrons or muons, is presented. The data used in this search were recorded in 2015 and 2016 by the ATLAS experiment in $\sqrt{s}$=13 TeV proton--proton collisions at the Large Hadron Collider, corresponding to an integrated luminosity of 36.1 fb$^{-1}$. The results are interpreted in the context of various models where squarks and gluinos are pair-produced and the neutralino is the lightest supersymmetric particle. An exclusion limit at the 95\% confidence level on the mass of the gluino is set at 2.03 TeV for a simplified model incorporating only a gluino and the lightest neutralino, assuming the lightest neutralino is massless. For a simplified model involving the strong production of mass-degenerate first- and second-generation squarks, squark masses below 1.55 TeV are excluded if the lightest neutralino is massless. These limits substantially extend the region of supersymmetric parameter space previously excluded by searches with the ATLAS detector.
Observed and expected background and signal effective mass distributions for SR2j-2100. For signal, a squark direct decay model where squarks have mass of 600 GeV and the neutralino1 has mass of 595 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2j-2800. For signal, a squark direct decay model where squarks have mass of 1500 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR4j-1000. For signal, a gluino direct decay model where gluinos have mass of 1300 GeV and the neutralino1 has mass of 900 GeV is shown.
Observed and expected background and signal effective mass distributions for SR4j-2200. For signal, a gluino direct decay model where gluinos have mass of 1800 GeV and the neutralino1 has mass of 800 GeV is shown.
Observed and expected background and signal effective mass distributions for SR6j-2600. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2jB-2400. For signal, a gluino onestep decay model where gluinos have mass of 1600 GeV, the chargino1 has mass of 1590 GeV and the neutralino1 has mass of 60 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2j-1200. For signal, a squark direct decay model where squarks have mass of 900 GeV and the neutralino1 has mass of 500 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2j-1600. For signal, a squark direct decay model where squarks have mass of 1200 GeV and the neutralino1 has mass of 500 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2j-2000. For signal, a squark direct decay model where squarks have mass of 1200 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2j-2400. For signal, a squark direct decay model where squarks have mass of 1500 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2j-3600. For signal, a squark direct decay model where squarks have mass of 1200 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2jB-1600. For signal, a gluino onestep decay model where gluinos have mass of 1600 GeV, the chargino1 has mass of 1590 GeV and the neutralino1 has mass of 60 GeV is shown.
Observed and expected background and signal effective mass distributions for SR3j-1300. For signal, a squark direct decay model where squarks have mass of 600 GeV and the neutralino1 has mass of 595 GeV is shown.
Observed and expected background and signal effective mass distributions for SR4j-1400. For signal, a gluino direct decay model where gluinos have mass of 1800 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR4j-1800. For signal, a gluino direct decay model where gluinos have mass of 1800 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR4j-2600. For signal, a gluino direct decay model where gluinos have mass of 1800 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR4j-3000. For signal, a gluino direct decay model where gluinos have mass of 1800 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR5j-1600. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed and expected background and signal effective mass distributions for SR5j-1700. For signal, a gluino direct decay model where gluinos have mass of 1800 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR5j-2000. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed and expected background and signal effective mass distributions for SR5j-2600. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed and expected background and signal effective mass distributions for SR6j-1200. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed and expected background and signal effective mass distributions for SR6j-1800. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed and expected background and signal effective mass distributions for SR6j-2200. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed 95% CL upper limit on the signal cross-section from searches in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from searches on the light-flavor squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from searches on the light-flavor squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the light-flavor squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the light-flavor squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from RJR-based searches on the light-flavor squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from RJR-based searches on the light-flavor squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from searches in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from RJR-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from RJR-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from searches in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from searches on the squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from searches on the squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from RJR-based searches on the squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from RJR-based searches on the squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the squark mass and the mass gap ratio x in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the squark mass and the mass gap ratio x in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from searches in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from RJR-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from RJR-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the gluino mass and the mass gap ratio x in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the gluino mass and the mass gap ratio x in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate the second lightest neutralino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{2}^{0} \rightarrow qq Z \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the gluino and second lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate the second lightest neutralino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{2}^{0} \rightarrow qq Z \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the gluino and second lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate the second lightest neutralino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{2}^{0} \rightarrow qq Z \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino or second lightest neutralino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$, or $\tilde{q} \rightarrow q \tilde{\chi}_{2}^{0} \rightarrow qq Z/h \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the squark mass and the mass gap ratio x in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino or second lightest neutralino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$, or $\tilde{q} \rightarrow q \tilde{\chi}_{2}^{0} \rightarrow qq Z/h \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the squark mass and the mass gap ratio x in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino or second lightest neutralino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$, or $\tilde{q} \rightarrow q \tilde{\chi}_{2}^{0} \rightarrow qq Z/h \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino or second lightest neutralino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$, or $\tilde{g} \rightarrow qq \tilde{\chi}_{2}^{0} \rightarrow qq Z/h \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the gluino mass and the mass gap ratio x in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino or second lightest neutralino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$, or $\tilde{g} \rightarrow qq \tilde{\chi}_{2}^{0} \rightarrow qq Z/h \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the gluino mass and the mass gap ratio x in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino or second lightest neutralino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$, or $\tilde{g} \rightarrow qq \tilde{\chi}_{2}^{0} \rightarrow qq Z/h \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=0$ GeV.
Expected 95% CL exclusion contours from Meff-based searches on the gluino and squark masses for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=0$ GeV.
Observed 95% CL exclusion contours from Meff-based searches on the gluino and squark masses for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=0$ GeV.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=695$ GeV.
Expected 95% CL exclusion contours from Meff-based searches on the gluino and squark masses for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=695$ GeV.
Observed 95% CL exclusion contours from Meff-based searches on the gluino and squark masses for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=695$ GeV.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=995$ GeV.
Expected 95% CL exclusion contours from Meff-based searches on the gluino and squark masses for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=995$ GeV.
Observed 95% CL exclusion contours from Meff-based searches on the gluino and squark masses for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=995$ GeV.
Cut-flow of Meff-2j for three supersymmetric models: a gluino direct decay model where gluinos have mass of 2000 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 0 $\mathrm{\ Ge\kern -0.1em V}$ (10000 generated events); and a squark direct decay model where squarks have mass of 1200 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 600 $\mathrm{\ Ge\kern -0.1em V}$ (20000 generated events); and a squark direct decay model where squarks have mass of 1500 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 0 $\mathrm{\ Ge\kern -0.1em V}$ (10000 generated events). The numbers are normalized to a luminosity of 36.1 fb$^{-1}$.
Cut-flow of Meff-3j,4j for three supersymmetric models: a gluino direct decay model where gluinos have mass of 2000 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 0 $\mathrm{\ Ge\kern -0.1em V}$ (10000 generated events); and a squark direct decay model where squarks have mass of 1200 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 600 $\mathrm{\ Ge\kern -0.1em V}$ (20000 generated events); and a squark direct decay model where squarks have mass of 1500 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 0 $\mathrm{\ Ge\kern -0.1em V}$ (10000 generated events). The numbers are normalized to a luminosity of 36.1 fb$^{-1}$.
Cut-flow of Meff-5j,6j for three supersymmetric models: a gluino direct decay model where gluinos have mass of 2000 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 0 $\mathrm{\ Ge\kern -0.1em V}$ (10000 generated events); and a squark direct decay model where squarks have mass of 1200 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 600 $\mathrm{\ Ge\kern -0.1em V}$ (20000 generated events); and a squark direct decay model where squarks have mass of 1500 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 0 $\mathrm{\ Ge\kern -0.1em V}$ (10000 generated events). The numbers are normalized to a luminosity of 36.1 fb$^{-1}$.
Cut-flow for RJR-based SR's targeting squarks for SS direct model points. Expected yields are normalized to a luminosity of 36.1 fb$^{-1}$.
Cut-flow for RJR-based SR's targeting gluinos for GG direct model points. Expected yields are normalized to a luminosity of 36.1 fb$^{-1}$.
Cut-flow for RJR-based SR's targeting compressed mass-spectra signals for SS direct and GG direct model points. Expected yields are normalized to a luminosity of 36.1 fb$^{-1}$.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-1200.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-1600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2000.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2400.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2800.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-3600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2100.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-3j-1300.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-1000.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-1400.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-1800.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-2200.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-2600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-3000.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-1700.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-1600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-2000.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-2600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-1200.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-1800.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-2200.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-2600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2jB-1600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2jB-2400.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S1a.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S1b.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S2a.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S2b.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S3a.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S3b.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S4.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C1.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C2.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C3.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C4.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C5.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G1a.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G1b.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G2a.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G2b.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G3a.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G3b.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G4.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-1200.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-1600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2000.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2400.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2800.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-3600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2100.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-3j-1300.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-1000.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-1400.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-1800.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-2200.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-2600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-3000.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-1700.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-1600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-2000.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-2600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-1200.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-1800.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-2200.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-2600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2jB-1600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2jB-2400.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S1a.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S1b.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S2a.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S2b.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S3a.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S3b.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S4.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C1.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C2.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C3.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C4.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C5.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G1a.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G1b.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G2a.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G2b.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G3a.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G3b.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G4.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-1200.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-1600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2000.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2400.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2800.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-3600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2100.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-3j-1300.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-1000.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-1400.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-1800.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-2200.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-2600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-3000.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-1700.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-1600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-2000.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-2600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-1200.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-1800.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-2200.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-2600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2jB-1600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2jB-2400.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S1a.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S1b.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S2a.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S2b.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S3a.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S3b.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S4.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C1.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C2.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C3.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C4.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C5.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G1a.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G1b.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G2a.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G2b.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G3a.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G3b.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G4.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-1200.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-1600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2000.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2400.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2800.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-3600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2100.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-3j-1300.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-1000.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-1400.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-1800.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-2200.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-2600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-3000.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-1700.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-1600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-2000.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-2600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-1200.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-1800.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-2200.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-2600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2jB-1600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2jB-2400.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S1a.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S1b.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S2a.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S2b.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S3a.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S3b.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S4.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C1.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C2.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C3.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C4.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C5.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G1a.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G1b.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G2a.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G2b.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G3a.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G3b.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G4.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-1200.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-1600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2000.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2400.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2800.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-3600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2100.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-3j-1300.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-1000.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-1400.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-1800.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-2200.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-2600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-3000.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-1700.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-1600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-2000.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-2600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-1200.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-1800.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-2200.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-2600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2jB-1600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2jB-2400.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S1a.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S1b.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S2a.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S2b.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S3a.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S3b.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S4.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C1.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C2.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C3.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C4.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C5.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G1a.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G1b.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G2a.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G2b.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G3a.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G3b.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G4.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-1200.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-1600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2000.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2400.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2800.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-3600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2100.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-3j-1300.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-1000.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-1400.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-1800.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-2200.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-2600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-3000.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-1700.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-1600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-2000.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-2600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-1200.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-1800.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-2200.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-2600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2jB-1600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2jB-2400.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S1a.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S1b.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S2a.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S2b.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S3a.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S3b.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S4.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C1.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C2.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C3.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C4.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C5.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G1a.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G1b.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G2a.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G2b.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G3a.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G3b.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G4.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-1200.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-1600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2000.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2400.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2800.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-3600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2100.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-3j-1300.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-1000.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-1400.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-1800.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-2200.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-2600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-3000.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-1700.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-1600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-2000.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-2600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-1200.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-1800.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-2200.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-2600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2jB-1600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2jB-2400.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S1a.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S1b.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S2a.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S2b.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S3a.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S3b.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S4.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C1.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C2.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C3.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C4.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C5.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G1a.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G1b.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G2a.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G2b.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G3a.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G3b.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G4.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-1200.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-1600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2000.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2400.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2800.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-3600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2100.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-3j-1300.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-1000.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-1400.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-1800.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-2200.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-2600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-3000.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-1700.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-1600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-2000.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-2600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-1200.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-1800.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-2200.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-2600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2jB-1600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2jB-2400.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S1a.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S1b.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S2a.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S2b.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S3a.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S3b.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S4.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C1.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C2.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C3.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C4.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C5.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G1a.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G1b.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G2a.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G2b.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G3a.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G3b.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G4.
A search for electroweak production of supersymmetric particles in scenarios with compressed mass spectra in final states with two low-momentum leptons and missing transverse momentum is presented. This search uses proton-proton collision data recorded by the ATLAS detector at the Large Hadron Collider in 2015-2016, corresponding to 36.1 fb$^{-1}$ of integrated luminosity at $\sqrt{s}=13$ TeV. Events with same-flavor pairs of electrons or muons with opposite electric charge are selected. The data are found to be consistent with the Standard Model prediction. Results are interpreted using simplified models of R-parity-conserving supersymmetry in which there is a small mass difference between the masses of the produced supersymmetric particles and the lightest neutralino. Exclusion limits at 95% confidence level are set on next-to-lightest neutralino masses of up to 145 GeV for Higgsino production and 175 GeV for wino production, and slepton masses of up to 190 GeV for pair production of sleptons. In the compressed mass regime, the exclusion limits extend down to mass splittings of 2.5 GeV for Higgsino production, 2 GeV for wino production, and 1 GeV for slepton production. The results are also interpreted in the context of a radiatively-driven natural supersymmetry model with non-universal Higgs boson masses.
<b>Kinematics 1</b> Kinematic distributions after the background-only fit showing the data as well as the expected background in the inclusive electroweakino SRℓℓ-m<sub>ℓℓ</sub> [1, 60] (top) and slepton SRℓℓ-m<sub>T2</sub><sup>100</sup> [100, ∞] (bottom) signal regions. The arrow in the E<sub>T</sub><sup>miss</sup>/H<sub>T</sub><sup>lep</sup> variables indicates the minimum value of the requirement imposed in the final SR selection. The m<sub>ℓℓ</sub> and m<sub>T2</sub> distributions (right) have all the SR requirements applied. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The uncertainty bands plotted include all statistical and systematic uncertainties. The last bin includes overflow. The dashed lines represent benchmark signal samples corresponding to the Higgsino H̃ and slepton ℓ̃ simplified models. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 1</b> Kinematic distributions after the background-only fit showing the data as well as the expected background in the inclusive electroweakino SRℓℓ-m<sub>ℓℓ</sub> [1, 60] (top) and slepton SRℓℓ-m<sub>T2</sub><sup>100</sup> [100, ∞] (bottom) signal regions. The arrow in the E<sub>T</sub><sup>miss</sup>/H<sub>T</sub><sup>lep</sup> variables indicates the minimum value of the requirement imposed in the final SR selection. The m<sub>ℓℓ</sub> and m<sub>T2</sub> distributions (right) have all the SR requirements applied. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The uncertainty bands plotted include all statistical and systematic uncertainties. The last bin includes overflow. The dashed lines represent benchmark signal samples corresponding to the Higgsino H̃ and slepton ℓ̃ simplified models. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 2</b> Kinematic distributions after the background-only fit showing the data as well as the expected background in the inclusive electroweakino SRℓℓ-m<sub>ℓℓ</sub> [1, 60] (top) and slepton SRℓℓ-m<sub>T2</sub><sup>100</sup> [100, ∞] (bottom) signal regions. The arrow in the E<sub>T</sub><sup>miss</sup>/H<sub>T</sub><sup>lep</sup> variables indicates the minimum value of the requirement imposed in the final SR selection. The m<sub>ℓℓ</sub> and m<sub>T2</sub> distributions (right) have all the SR requirements applied. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The uncertainty bands plotted include all statistical and systematic uncertainties. The last bin includes overflow. The dashed lines represent benchmark signal samples corresponding to the Higgsino H̃ and slepton ℓ̃ simplified models. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 2</b> Kinematic distributions after the background-only fit showing the data as well as the expected background in the inclusive electroweakino SRℓℓ-m<sub>ℓℓ</sub> [1, 60] (top) and slepton SRℓℓ-m<sub>T2</sub><sup>100</sup> [100, ∞] (bottom) signal regions. The arrow in the E<sub>T</sub><sup>miss</sup>/H<sub>T</sub><sup>lep</sup> variables indicates the minimum value of the requirement imposed in the final SR selection. The m<sub>ℓℓ</sub> and m<sub>T2</sub> distributions (right) have all the SR requirements applied. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The uncertainty bands plotted include all statistical and systematic uncertainties. The last bin includes overflow. The dashed lines represent benchmark signal samples corresponding to the Higgsino H̃ and slepton ℓ̃ simplified models. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 3</b> Kinematic distributions after the background-only fit showing the data as well as the expected background in the inclusive electroweakino SRℓℓ-m<sub>ℓℓ</sub> [1, 60] (top) and slepton SRℓℓ-m<sub>T2</sub><sup>100</sup> [100, ∞] (bottom) signal regions. The arrow in the E<sub>T</sub><sup>miss</sup>/H<sub>T</sub><sup>lep</sup> variables indicates the minimum value of the requirement imposed in the final SR selection. The m<sub>ℓℓ</sub> and m<sub>T2</sub> distributions (right) have all the SR requirements applied. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The uncertainty bands plotted include all statistical and systematic uncertainties. The last bin includes overflow. The dashed lines represent benchmark signal samples corresponding to the Higgsino H̃ and slepton ℓ̃ simplified models. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 3</b> Kinematic distributions after the background-only fit showing the data as well as the expected background in the inclusive electroweakino SRℓℓ-m<sub>ℓℓ</sub> [1, 60] (top) and slepton SRℓℓ-m<sub>T2</sub><sup>100</sup> [100, ∞] (bottom) signal regions. The arrow in the E<sub>T</sub><sup>miss</sup>/H<sub>T</sub><sup>lep</sup> variables indicates the minimum value of the requirement imposed in the final SR selection. The m<sub>ℓℓ</sub> and m<sub>T2</sub> distributions (right) have all the SR requirements applied. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The uncertainty bands plotted include all statistical and systematic uncertainties. The last bin includes overflow. The dashed lines represent benchmark signal samples corresponding to the Higgsino H̃ and slepton ℓ̃ simplified models. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 4</b> Kinematic distributions after the background-only fit showing the data as well as the expected background in the inclusive electroweakino SRℓℓ-m<sub>ℓℓ</sub> [1, 60] (top) and slepton SRℓℓ-m<sub>T2</sub><sup>100</sup> [100, ∞] (bottom) signal regions. The arrow in the E<sub>T</sub><sup>miss</sup>/H<sub>T</sub><sup>lep</sup> variables indicates the minimum value of the requirement imposed in the final SR selection. The m<sub>ℓℓ</sub> and m<sub>T2</sub> distributions (right) have all the SR requirements applied. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The uncertainty bands plotted include all statistical and systematic uncertainties. The last bin includes overflow. The dashed lines represent benchmark signal samples corresponding to the Higgsino H̃ and slepton ℓ̃ simplified models. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 4</b> Kinematic distributions after the background-only fit showing the data as well as the expected background in the inclusive electroweakino SRℓℓ-m<sub>ℓℓ</sub> [1, 60] (top) and slepton SRℓℓ-m<sub>T2</sub><sup>100</sup> [100, ∞] (bottom) signal regions. The arrow in the E<sub>T</sub><sup>miss</sup>/H<sub>T</sub><sup>lep</sup> variables indicates the minimum value of the requirement imposed in the final SR selection. The m<sub>ℓℓ</sub> and m<sub>T2</sub> distributions (right) have all the SR requirements applied. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The uncertainty bands plotted include all statistical and systematic uncertainties. The last bin includes overflow. The dashed lines represent benchmark signal samples corresponding to the Higgsino H̃ and slepton ℓ̃ simplified models. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Exclusion 1 (exp)</b> Expected 95% CL exclusion sensitivity (blue dashed line) with pm1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and observed limits (red solid line) with pm1σ<sub>theory</sub> (dotted red line) from signal cross-section uncertainties for simplified models of direct Higgsino (top) and wino (bottom) production. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive the limit, which is projected into the Δ m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) vs. m(χ̃<sub>2</sub><sup>0</sup>) plane. For Higgsino production, the chargino χ̃<sub>1</sub><sup>pm</sup> mass is assumed to be halfway between the two lightest neutralino masses, while m(χ̃<sub>2</sub><sup>0</sup>) = m(χ̃<sub>1</sub><sup>pm</sup>) is assumed for the wino--bino model. The gray regions denote the lower chargino mass limit from LEP [20]. The blue region in the lower plot indicates the limit from the 2ℓ+3ℓ combination of ATLAS Run 1 [41,42].
<b>Exclusion 1 (exp)</b> Expected 95% CL exclusion sensitivity (blue dashed line) with pm1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and observed limits (red solid line) with pm1σ<sub>theory</sub> (dotted red line) from signal cross-section uncertainties for simplified models of direct Higgsino (top) and wino (bottom) production. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive the limit, which is projected into the Δ m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) vs. m(χ̃<sub>2</sub><sup>0</sup>) plane. For Higgsino production, the chargino χ̃<sub>1</sub><sup>pm</sup> mass is assumed to be halfway between the two lightest neutralino masses, while m(χ̃<sub>2</sub><sup>0</sup>) = m(χ̃<sub>1</sub><sup>pm</sup>) is assumed for the wino--bino model. The gray regions denote the lower chargino mass limit from LEP [20]. The blue region in the lower plot indicates the limit from the 2ℓ+3ℓ combination of ATLAS Run 1 [41,42].
<b>Exclusion 1 (obs)</b> Expected 95% CL exclusion sensitivity (blue dashed line) with pm1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and observed limits (red solid line) with pm1σ<sub>theory</sub> (dotted red line) from signal cross-section uncertainties for simplified models of direct Higgsino (top) and wino (bottom) production. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive the limit, which is projected into the Δ m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) vs. m(χ̃<sub>2</sub><sup>0</sup>) plane. For Higgsino production, the chargino χ̃<sub>1</sub><sup>pm</sup> mass is assumed to be halfway between the two lightest neutralino masses, while m(χ̃<sub>2</sub><sup>0</sup>) = m(χ̃<sub>1</sub><sup>pm</sup>) is assumed for the wino--bino model. The gray regions denote the lower chargino mass limit from LEP [20]. The blue region in the lower plot indicates the limit from the 2ℓ+3ℓ combination of ATLAS Run 1 [41,42].
<b>Exclusion 1 (obs)</b> Expected 95% CL exclusion sensitivity (blue dashed line) with pm1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and observed limits (red solid line) with pm1σ<sub>theory</sub> (dotted red line) from signal cross-section uncertainties for simplified models of direct Higgsino (top) and wino (bottom) production. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive the limit, which is projected into the Δ m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) vs. m(χ̃<sub>2</sub><sup>0</sup>) plane. For Higgsino production, the chargino χ̃<sub>1</sub><sup>pm</sup> mass is assumed to be halfway between the two lightest neutralino masses, while m(χ̃<sub>2</sub><sup>0</sup>) = m(χ̃<sub>1</sub><sup>pm</sup>) is assumed for the wino--bino model. The gray regions denote the lower chargino mass limit from LEP [20]. The blue region in the lower plot indicates the limit from the 2ℓ+3ℓ combination of ATLAS Run 1 [41,42].
<b>Exclusion 2 (exp)</b> Expected 95% CL exclusion sensitivity (blue dashed line) with pm1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and observed limits (red solid line) with pm1σ<sub>theory</sub> (dotted red line) from signal cross-section uncertainties for simplified models of direct Higgsino (top) and wino (bottom) production. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive the limit, which is projected into the Δ m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) vs. m(χ̃<sub>2</sub><sup>0</sup>) plane. For Higgsino production, the chargino χ̃<sub>1</sub><sup>pm</sup> mass is assumed to be halfway between the two lightest neutralino masses, while m(χ̃<sub>2</sub><sup>0</sup>) = m(χ̃<sub>1</sub><sup>pm</sup>) is assumed for the wino--bino model. The gray regions denote the lower chargino mass limit from LEP [20]. The blue region in the lower plot indicates the limit from the 2ℓ+3ℓ combination of ATLAS Run 1 [41,42].
<b>Exclusion 2 (exp)</b> Expected 95% CL exclusion sensitivity (blue dashed line) with pm1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and observed limits (red solid line) with pm1σ<sub>theory</sub> (dotted red line) from signal cross-section uncertainties for simplified models of direct Higgsino (top) and wino (bottom) production. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive the limit, which is projected into the Δ m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) vs. m(χ̃<sub>2</sub><sup>0</sup>) plane. For Higgsino production, the chargino χ̃<sub>1</sub><sup>pm</sup> mass is assumed to be halfway between the two lightest neutralino masses, while m(χ̃<sub>2</sub><sup>0</sup>) = m(χ̃<sub>1</sub><sup>pm</sup>) is assumed for the wino--bino model. The gray regions denote the lower chargino mass limit from LEP [20]. The blue region in the lower plot indicates the limit from the 2ℓ+3ℓ combination of ATLAS Run 1 [41,42].
<b>Exclusion 2 (obs)</b> Expected 95% CL exclusion sensitivity (blue dashed line) with pm1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and observed limits (red solid line) with pm1σ<sub>theory</sub> (dotted red line) from signal cross-section uncertainties for simplified models of direct Higgsino (top) and wino (bottom) production. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive the limit, which is projected into the Δ m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) vs. m(χ̃<sub>2</sub><sup>0</sup>) plane. For Higgsino production, the chargino χ̃<sub>1</sub><sup>pm</sup> mass is assumed to be halfway between the two lightest neutralino masses, while m(χ̃<sub>2</sub><sup>0</sup>) = m(χ̃<sub>1</sub><sup>pm</sup>) is assumed for the wino--bino model. The gray regions denote the lower chargino mass limit from LEP [20]. The blue region in the lower plot indicates the limit from the 2ℓ+3ℓ combination of ATLAS Run 1 [41,42].
<b>Exclusion 2 (obs)</b> Expected 95% CL exclusion sensitivity (blue dashed line) with pm1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and observed limits (red solid line) with pm1σ<sub>theory</sub> (dotted red line) from signal cross-section uncertainties for simplified models of direct Higgsino (top) and wino (bottom) production. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive the limit, which is projected into the Δ m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) vs. m(χ̃<sub>2</sub><sup>0</sup>) plane. For Higgsino production, the chargino χ̃<sub>1</sub><sup>pm</sup> mass is assumed to be halfway between the two lightest neutralino masses, while m(χ̃<sub>2</sub><sup>0</sup>) = m(χ̃<sub>1</sub><sup>pm</sup>) is assumed for the wino--bino model. The gray regions denote the lower chargino mass limit from LEP [20]. The blue region in the lower plot indicates the limit from the 2ℓ+3ℓ combination of ATLAS Run 1 [41,42].
<b>Exclusion 3 (exp)</b> Expected 95% CL exclusion sensitivity (blue dashed line) with ± 1 σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and observed limits (red solid line) with ± 1 σ<sub>theory</sub> (dotted red line) from signal cross-section uncertainties for simplified models of direct slepton production. A fit of slepton signals to the m<sub>T2</sub><sup>100</sup> spectrum is used to derive the limit, which is projected into the Δ m(ℓ̃, χ̃<sub>1</sub><sup>0</sup>) vs. m(ℓ̃) plane. Slepton ℓ̃ refers to the scalar partners of left- and right-handed electrons and muons, which are assumed to be fourfold mass degenerate m(ẽ<sub>L</sub>) = m(ẽ<sub>R</sub>) = m(μ̃<sub>L</sub>) = m(μ̃<sub>R</sub>). The gray region is the ẽ<sub>R</sub> limit from LEP [20,24], while the blue region is the fourfold mass degenerate slepton limit from ATLAS Run 1 [41].
<b>Exclusion 3 (exp)</b> Expected 95% CL exclusion sensitivity (blue dashed line) with ± 1 σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and observed limits (red solid line) with ± 1 σ<sub>theory</sub> (dotted red line) from signal cross-section uncertainties for simplified models of direct slepton production. A fit of slepton signals to the m<sub>T2</sub><sup>100</sup> spectrum is used to derive the limit, which is projected into the Δ m(ℓ̃, χ̃<sub>1</sub><sup>0</sup>) vs. m(ℓ̃) plane. Slepton ℓ̃ refers to the scalar partners of left- and right-handed electrons and muons, which are assumed to be fourfold mass degenerate m(ẽ<sub>L</sub>) = m(ẽ<sub>R</sub>) = m(μ̃<sub>L</sub>) = m(μ̃<sub>R</sub>). The gray region is the ẽ<sub>R</sub> limit from LEP [20,24], while the blue region is the fourfold mass degenerate slepton limit from ATLAS Run 1 [41].
<b>Exclusion 3 (obs)</b> Expected 95% CL exclusion sensitivity (blue dashed line) with ± 1 σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and observed limits (red solid line) with ± 1 σ<sub>theory</sub> (dotted red line) from signal cross-section uncertainties for simplified models of direct slepton production. A fit of slepton signals to the m<sub>T2</sub><sup>100</sup> spectrum is used to derive the limit, which is projected into the Δ m(ℓ̃, χ̃<sub>1</sub><sup>0</sup>) vs. m(ℓ̃) plane. Slepton ℓ̃ refers to the scalar partners of left- and right-handed electrons and muons, which are assumed to be fourfold mass degenerate m(ẽ<sub>L</sub>) = m(ẽ<sub>R</sub>) = m(μ̃<sub>L</sub>) = m(μ̃<sub>R</sub>). The gray region is the ẽ<sub>R</sub> limit from LEP [20,24], while the blue region is the fourfold mass degenerate slepton limit from ATLAS Run 1 [41].
<b>Exclusion 3 (obs)</b> Expected 95% CL exclusion sensitivity (blue dashed line) with ± 1 σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and observed limits (red solid line) with ± 1 σ<sub>theory</sub> (dotted red line) from signal cross-section uncertainties for simplified models of direct slepton production. A fit of slepton signals to the m<sub>T2</sub><sup>100</sup> spectrum is used to derive the limit, which is projected into the Δ m(ℓ̃, χ̃<sub>1</sub><sup>0</sup>) vs. m(ℓ̃) plane. Slepton ℓ̃ refers to the scalar partners of left- and right-handed electrons and muons, which are assumed to be fourfold mass degenerate m(ẽ<sub>L</sub>) = m(ẽ<sub>R</sub>) = m(μ̃<sub>L</sub>) = m(μ̃<sub>R</sub>). The gray region is the ẽ<sub>R</sub> limit from LEP [20,24], while the blue region is the fourfold mass degenerate slepton limit from ATLAS Run 1 [41].
<b>Upper Limits 1</b> The first two columns present observed (N<sub>obs</sub>) and expected (N<sub>exp</sub>) event yields in the inclusive signal regions. The latter are obtained by the background-only fit of the control regions, and the errors include both statistical and systematic uncertainties. The next two columns show the observed 95% CL upper limits on the visible cross-section (⟨εσ⟩<sub>obs</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The fifth column (S<sub>exp</sub><sup>95</sup>) shows what the 95% CL upper limit on the number of signal events would be, given an observed number of events equal to the expected number (and +- 1 σ deviations from the expectation) of background events. The last column indicates the discovery p-value (p(s = 0)), which is capped at 0.5.
<b>Upper Limits 1</b> The first two columns present observed (N<sub>obs</sub>) and expected (N<sub>exp</sub>) event yields in the inclusive signal regions. The latter are obtained by the background-only fit of the control regions, and the errors include both statistical and systematic uncertainties. The next two columns show the observed 95% CL upper limits on the visible cross-section (⟨εσ⟩<sub>obs</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The fifth column (S<sub>exp</sub><sup>95</sup>) shows what the 95% CL upper limit on the number of signal events would be, given an observed number of events equal to the expected number (and +- 1 σ deviations from the expectation) of background events. The last column indicates the discovery p-value (p(s = 0)), which is capped at 0.5.
<b>Cutflow 1</b> Observed event yields and exclusion fit results with the signal strength parameter set to zero for the exclusive electroweakino and slepton signal regions. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. Uncertainties in the fitted background estimates combine statistical and systematic uncertainties.
<b>Cutflow 1</b> Observed event yields and exclusion fit results with the signal strength parameter set to zero for the exclusive electroweakino and slepton signal regions. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. Uncertainties in the fitted background estimates combine statistical and systematic uncertainties.
<b>Acceptances 1</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 1</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 2</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 2</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 3</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 3</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 4</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 4</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 5</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 5</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 6</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 6</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 7</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 7</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>±</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 8</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 8</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 9</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 9</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 10</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 10</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 11</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 11</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 12</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 12</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 13</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 13</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 14</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 14</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 15</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 15</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 16</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 16</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 17</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 17</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 18</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 18</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 19</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 19</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 20</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 20</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 21</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 21</b> Truth acceptances for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 22</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 22</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 23</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 23</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 24</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 24</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 25</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 25</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 26</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 26</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 27</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 27</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 28</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 28</b> Truth acceptances for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>4</sup>.
<b>Acceptances 29</b> Truth acceptances for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>3</sup>.
<b>Acceptances 29</b> Truth acceptances for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>3</sup>.
<b>Acceptances 30</b> Truth acceptances for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>3</sup>.
<b>Acceptances 30</b> Truth acceptances for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>3</sup>.
<b>Acceptances 31</b> Truth acceptances for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>3</sup>.
<b>Acceptances 31</b> Truth acceptances for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>3</sup>.
<b>Acceptances 32</b> Truth acceptances for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>3</sup>.
<b>Acceptances 32</b> Truth acceptances for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>3</sup>.
<b>Acceptances 33</b> Truth acceptances for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>3</sup>.
<b>Acceptances 33</b> Truth acceptances for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>3</sup>.
<b>Acceptances 34</b> Truth acceptances for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>3</sup>.
<b>Acceptances 34</b> Truth acceptances for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Numbers overlaid on the mass planes are the acceptance × 10<sup>3</sup>.
<b>Efficiencies 1</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 1</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 2</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 2</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 3</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 3</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 4</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 4</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 5</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 5</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 6</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 6</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 7</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 7</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 8</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 8</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 9</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 9</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 10</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 10</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 11</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 11</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 12</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 12</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 13</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 13</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 14</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 14</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 15</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 15</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 16</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 16</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 17</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 17</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 18</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 18</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 19</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 19</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 20</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 20</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 21</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 21</b> Efficiencies for the Higgsino χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 22</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 22</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 23</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 23</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 24</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 24</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 25</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 25</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 26</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 26</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 27</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 27</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 28</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 28</b> Efficiencies for the Higgsino χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> production process in the inclusive SRℓℓ-m<sub>ℓℓ</sub> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 29</b> Efficiencies for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 29</b> Efficiencies for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 30</b> Efficiencies for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 30</b> Efficiencies for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 31</b> Efficiencies for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 31</b> Efficiencies for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 32</b> Efficiencies for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 32</b> Efficiencies for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 33</b> Efficiencies for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 33</b> Efficiencies for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 34</b> Efficiencies for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Efficiencies 34</b> Efficiencies for the ℓ̃ℓ̃ production in the inclusive SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Efficiencies are computed as the ``acceptance times efficiency" divided by the acceptance. The black line indicates the maximum allowed value of Δ m or m<sub>T2</sub> for the inclusive signal region under study.
<b>Cross-Sections 1</b> Cross-sections of the Higgsino signal grid for each production process denoted in the caption.
<b>Cross-Sections 1</b> Cross-sections of the Higgsino signal grid for each production process denoted in the caption.
<b>Cross-Sections 2</b> Cross-sections of the Higgsino signal grid for each production process denoted in the caption.
<b>Cross-Sections 2</b> Cross-sections of the Higgsino signal grid for each production process denoted in the caption.
<b>Cross-Sections 3</b> Cross-sections of the Higgsino signal grid for each production process denoted in the caption.
<b>Cross-Sections 3</b> Cross-sections of the Higgsino signal grid for each production process denoted in the caption.
<b>Cross-Sections 4</b> Cross-sections of the Higgsino signal grid for each production process denoted in the caption.
<b>Cross-Sections 4</b> Cross-sections of the Higgsino signal grid for each production process denoted in the caption.
<b>Cross-Sections 5</b> Cross-sections of the wino--bino signal grid for each production process in the caption.
<b>Cross-Sections 5</b> Cross-sections of the wino--bino signal grid for each production process in the caption.
<b>Cross-Sections 6</b> Cross-sections of the wino--bino signal grid for each production process in the caption.
<b>Cross-Sections 6</b> Cross-sections of the wino--bino signal grid for each production process in the caption.
<b>Cross-Sections 7</b> Total cross-sections of the slepton simplified model signal grid. Slepton refers to a the scalar partners of the left- and right-handed electrons and muons, which are assumed to be mass degenerate m(ẽ<sub>L</sub>) = m(ẽ<sub>R</sub>) = m(μ̃<sub>L</sub>) = m(μ̃<sub>R</sub>).
<b>Cross-Sections 7</b> Total cross-sections of the slepton simplified model signal grid. Slepton refers to a the scalar partners of the left- and right-handed electrons and muons, which are assumed to be mass degenerate m(ẽ<sub>L</sub>) = m(ẽ<sub>R</sub>) = m(μ̃<sub>L</sub>) = m(μ̃<sub>R</sub>).
<b>Kinematics 5</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 5</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 6</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 6</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 7</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 7</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 8</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 8</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 9</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 9</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 10</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 10</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 11</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 11</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 12</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 12</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 13</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 13</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 14</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 14</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 15</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Kinematics 15</b> Distributions after the background-only fit of kinematic variables used to define selections common to all signal regions, i.e. not including requirements specific to the electroweakino or slepton SR definitions. Blue arrows in the upper panel denote the final requirement used to define the common SR, otherwise all selections are applied. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. The first (last) bin includes underflow (overflow). Benchmark Higgsino H̃ and slepton ℓ̃ signals are overlaid as dashed lines. Orange arrows in the Data/SM panel indicate values that are beyond the y-axis range.
<b>Upper Limits 2</b> Numbers show 95% CL model-dependent upper limits on the inclusive Higgsino signal cross-sections.
<b>Upper Limits 2</b> Numbers show 95% CL model-dependent upper limits on the inclusive Higgsino signal cross-sections.
<b>Upper Limits 3</b> Numbers show 95% CL model-dependent upper limits on the inclusive Higgsino signal cross-sections.
<b>Upper Limits 3</b> Numbers show 95% CL model-dependent upper limits on the inclusive Higgsino signal cross-sections.
<b>Upper Limits 4</b> Numbers show 95% CL model-dependent upper limits on the inclusive signal cross-sections of the wino--bino model.
<b>Upper Limits 4</b> Numbers show 95% CL model-dependent upper limits on the inclusive signal cross-sections of the wino--bino model.
<b>Upper Limits 5</b> Numbers show 95% CL model-dependent upper limits on the inclusive signal cross-sections of the wino--bino model.
<b>Upper Limits 5</b> Numbers show 95% CL model-dependent upper limits on the inclusive signal cross-sections of the wino--bino model.
<b>Upper Limits 6</b> Numbers show the 95% CL model-dependent upper limits on the slepton signal cross-sections, assuming a fourfold mass degeneracy m(ẽ<sub>L,R</sub>) = m(μ̃<sub>L,R</sub>).
<b>Upper Limits 6</b> Numbers show the 95% CL model-dependent upper limits on the slepton signal cross-sections, assuming a fourfold mass degeneracy m(ẽ<sub>L,R</sub>) = m(μ̃<sub>L,R</sub>).
<b>Upper Limits 7</b> Numbers show the 95% CL model-dependent upper limits on the slepton signal cross-sections, assuming a fourfold mass degeneracy m(ẽ<sub>L,R</sub>) = m(μ̃<sub>L,R</sub>).
<b>Upper Limits 7</b> Numbers show the 95% CL model-dependent upper limits on the slepton signal cross-sections, assuming a fourfold mass degeneracy m(ẽ<sub>L,R</sub>) = m(μ̃<sub>L,R</sub>).
<b>Upper Limits 8</b> Expected and observed 95% CL cross-section upper limits as a function of the universal gaugino mass m<sub>1/2</sub> for the NUHM2 model. The gray numbers indicate the values of the observed limit. The green and yellow bands around the expected limit indicate the ± 1σ and ± 2σ uncertainties, respectively. The expected signal production cross-sections as well as the associated uncertainty are indicated with the blue solid and dashed lines. The lower x-axis indicates the difference between the χ̃<sub>2</sub><sup>0</sup> and χ̃<sub>1</sub><sup>0</sup> masses for different values of m<sub>1/2</sub>. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive this limit.
<b>Upper Limits 8</b> Expected and observed 95% CL cross-section upper limits as a function of the universal gaugino mass m<sub>1/2</sub> for the NUHM2 model. The gray numbers indicate the values of the observed limit. The green and yellow bands around the expected limit indicate the ± 1σ and ± 2σ uncertainties, respectively. The expected signal production cross-sections as well as the associated uncertainty are indicated with the blue solid and dashed lines. The lower x-axis indicates the difference between the χ̃<sub>2</sub><sup>0</sup> and χ̃<sub>1</sub><sup>0</sup> masses for different values of m<sub>1/2</sub>. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive this limit.
<b>Upper Limits 9</b> Expected and observed 95% CL cross-section upper limits as a function of the universal gaugino mass m<sub>1/2</sub> for the NUHM2 model. The gray numbers indicate the values of the observed limit. The green and yellow bands around the expected limit indicate the ± 1σ and ± 2σ uncertainties, respectively. The expected signal production cross-sections as well as the associated uncertainty are indicated with the blue solid and dashed lines. The lower x-axis indicates the difference between the χ̃<sub>2</sub><sup>0</sup> and χ̃<sub>1</sub><sup>0</sup> masses for different values of m<sub>1/2</sub>. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive this limit.
<b>Upper Limits 9</b> Expected and observed 95% CL cross-section upper limits as a function of the universal gaugino mass m<sub>1/2</sub> for the NUHM2 model. The gray numbers indicate the values of the observed limit. The green and yellow bands around the expected limit indicate the ± 1σ and ± 2σ uncertainties, respectively. The expected signal production cross-sections as well as the associated uncertainty are indicated with the blue solid and dashed lines. The lower x-axis indicates the difference between the χ̃<sub>2</sub><sup>0</sup> and χ̃<sub>1</sub><sup>0</sup> masses for different values of m<sub>1/2</sub>. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive this limit.
<b>Upper Limits 10</b> Expected and observed 95% CL cross-section upper limits as a function of the universal gaugino mass m<sub>1/2</sub> for the NUHM2 model. The gray numbers indicate the values of the observed limit. The green and yellow bands around the expected limit indicate the ± 1σ and ± 2σ uncertainties, respectively. The expected signal production cross-sections as well as the associated uncertainty are indicated with the blue solid and dashed lines. The lower x-axis indicates the difference between the χ̃<sub>2</sub><sup>0</sup> and χ̃<sub>1</sub><sup>0</sup> masses for different values of m<sub>1/2</sub>. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive this limit.
<b>Upper Limits 10</b> Expected and observed 95% CL cross-section upper limits as a function of the universal gaugino mass m<sub>1/2</sub> for the NUHM2 model. The gray numbers indicate the values of the observed limit. The green and yellow bands around the expected limit indicate the ± 1σ and ± 2σ uncertainties, respectively. The expected signal production cross-sections as well as the associated uncertainty are indicated with the blue solid and dashed lines. The lower x-axis indicates the difference between the χ̃<sub>2</sub><sup>0</sup> and χ̃<sub>1</sub><sup>0</sup> masses for different values of m<sub>1/2</sub>. A fit of signals to the m<sub>ℓℓ</sub> spectrum is used to derive this limit.
<b>Cutflow 2</b> Observed event yields and exclusion fit results with the signal strength parameter set to zero for the exclusive electroweakino and slepton signal regions. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. Uncertainties in the fitted background estimates combine statistical and systematic uncertainties.
<b>Cutflow 2</b> Observed event yields and exclusion fit results with the signal strength parameter set to zero for the exclusive electroweakino and slepton signal regions. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. Uncertainties in the fitted background estimates combine statistical and systematic uncertainties.
<b>Cutflow 3</b> Observed event yields and background-only fit results for the inclusive electroweakino and slepton signal regions. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. Uncertainties in the fitted background estimates combine statistical and systematic uncertainties.
<b>Cutflow 3</b> Observed event yields and background-only fit results for the inclusive electroweakino and slepton signal regions. Background processes containing fewer than two prompt leptons are categorized as `Fake/nonprompt'. The category `Others' contains rare backgrounds from triboson, Higgs boson, and the remaining top-quark production processes listed in Table 1. Uncertainties in the fitted background estimates combine statistical and systematic uncertainties.
<b>Exclusion 4</b> Nominal observed and expected CLs values for Higgsino signals.
<b>Exclusion 4</b> Nominal observed and expected CLs values for Higgsino signals.
<b>Exclusion 5</b> Nominal observed and expected CLs values for wino--bino signals.
<b>Exclusion 5</b> Nominal observed and expected CLs values for wino--bino signals.
<b>Exclusion 6</b> Nominal observed and expected CLs values for slepton signals.
<b>Exclusion 6</b> Nominal observed and expected CLs values for slepton signals.
<b>Upper Limits 11</b> Upper limits on observed (expected) Higgsino simplified model signal cross section σ<sub>obs (exp)</sub><sup>95</sup> and signal strength σ<sub>obs (exp)</sub><sup>95</sup> / σ<sub>theory</sub>.
<b>Upper Limits 11</b> Upper limits on observed (expected) Higgsino simplified model signal cross section σ<sub>obs (exp)</sub><sup>95</sup> and signal strength σ<sub>obs (exp)</sub><sup>95</sup> / σ<sub>theory</sub>.
<b>Upper Limits 12</b> Upper limits on observed (expected) wino--bino simplified model signal cross section σ<sub>obs (exp)</sub><sup>95</sup> and signal strength σ<sub>obs (exp)</sub><sup>95</sup> / σ<sub>theory</sub>.
<b>Upper Limits 12</b> Upper limits on observed (expected) wino--bino simplified model signal cross section σ<sub>obs (exp)</sub><sup>95</sup> and signal strength σ<sub>obs (exp)</sub><sup>95</sup> / σ<sub>theory</sub>.
<b>Upper Limits 13</b> Upper limits on observed (expected) slepton simplified model signal cross section σ<sub>obs (exp)</sub><sup>95</sup> and signal strength σ<sub>obs (exp)</sub><sup>95</sup> / σ<sub>theory</sub>.
<b>Upper Limits 13</b> Upper limits on observed (expected) slepton simplified model signal cross section σ<sub>obs (exp)</sub><sup>95</sup> and signal strength σ<sub>obs (exp)</sub><sup>95</sup> / σ<sub>theory</sub>.
<b>Cutflow 4</b> Event counts for Higgsino H and slepton ℓ signals after sequential selections for the inclusive SRℓℓ-m<sub>ℓℓ</sub> and SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Weighted events are normalised to mathcalL = 36.1 fb<sup>-1</sup> and the inclusive cross section σ, while raw MC events are also shown. The generator filter with efficiency ε<sub>filt</sub> applied to the Higgsino signal requires truth E<sub>T</sub><sup>miss</sup> > 50 GeV and at least 2 leptons with p<sub>T</sub> > 3 GeV, while only the E<sub>T</sub><sup>miss</sup> > 50 GeV requirement is applied to the slepton signal. The mathcalB refers to the branching ratio Z<sup>(*)</sup> → ℓ<sup>+</sup>ℓ<sup>-</sup> in the Higgsino processes. ``Lepton truth matching" requires that the selected leptons are consistent with being decay products of the SUSY process. ``Lepton author 16 veto" removes a class of electron candidates reconstructed with algorithms designed to identify photon conversions.
<b>Cutflow 4</b> Event counts for Higgsino H and slepton ℓ signals after sequential selections for the inclusive SRℓℓ-m<sub>ℓℓ</sub> and SRℓℓ-m<sub>T2</sub><sup>100</sup> regions. Weighted events are normalised to mathcalL = 36.1 fb<sup>-1</sup> and the inclusive cross section σ, while raw MC events are also shown. The generator filter with efficiency ε<sub>filt</sub> applied to the Higgsino signal requires truth E<sub>T</sub><sup>miss</sup> > 50 GeV and at least 2 leptons with p<sub>T</sub> > 3 GeV, while only the E<sub>T</sub><sup>miss</sup> > 50 GeV requirement is applied to the slepton signal. The mathcalB refers to the branching ratio Z<sup>(*)</sup> → ℓ<sup>+</sup>ℓ<sup>-</sup> in the Higgsino processes. ``Lepton truth matching" requires that the selected leptons are consistent with being decay products of the SUSY process. ``Lepton author 16 veto" removes a class of electron candidates reconstructed with algorithms designed to identify photon conversions.
<b>Cutflow 5</b> Event counts for the χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> process of the Higgsino m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) = (110, 100) GeV signal and sequentially with each addition requirement for selections common to all signal regions (SRs), followed by those optimised for Higgsinos and sleptons. ``Lepton truth matching" requires that the selected leptons are consistent with being decay products of the SUSY process. ``Lepton author 16 veto" removes a class of electron candidates reconstructed with algorithms designed to identify photon conversions. Weighted events are normalised to 36.1 fb<sup>-1</sup> and the raw Monte Carlo events are also displayed.
<b>Cutflow 5</b> Event counts for the χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>+</sup> process of the Higgsino m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) = (110, 100) GeV signal and sequentially with each addition requirement for selections common to all signal regions (SRs), followed by those optimised for Higgsinos and sleptons. ``Lepton truth matching" requires that the selected leptons are consistent with being decay products of the SUSY process. ``Lepton author 16 veto" removes a class of electron candidates reconstructed with algorithms designed to identify photon conversions. Weighted events are normalised to 36.1 fb<sup>-1</sup> and the raw Monte Carlo events are also displayed.
<b>Cutflow 6</b> Event counts for the χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> process of the Higgsino m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) = (110, 100) GeV signal and sequentially with each addition requirement for selections common to all signal regions (SRs), followed by those optimised for Higgsinos and sleptons. ``Lepton truth matching" requires that the selected leptons are consistent with being decay products of the SUSY process. ``Lepton author 16 veto" removes a class of electron candidates reconstructed with algorithms designed to identify photon conversions. Weighted events are normalised to 36.1 fb<sup>-1</sup> and the raw Monte Carlo events are also displayed.
<b>Cutflow 6</b> Event counts for the χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>-</sup> process of the Higgsino m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) = (110, 100) GeV signal and sequentially with each addition requirement for selections common to all signal regions (SRs), followed by those optimised for Higgsinos and sleptons. ``Lepton truth matching" requires that the selected leptons are consistent with being decay products of the SUSY process. ``Lepton author 16 veto" removes a class of electron candidates reconstructed with algorithms designed to identify photon conversions. Weighted events are normalised to 36.1 fb<sup>-1</sup> and the raw Monte Carlo events are also displayed.
<b>Cutflow 7</b> Event counts for the χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> process of the Higgsino m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) = (110, 100) GeV signal and sequentially with each addition requirement followed by those optimised for Higgsinos and sleptons. Weighted events are normalised to 36.1 fb<sup>-1</sup> and the raw Monte Carlo events are also displayed.
<b>Cutflow 7</b> Event counts for the χ̃<sub>2</sub><sup>0</sup>χ̃<sub>1</sub><sup>0</sup> process of the Higgsino m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) = (110, 100) GeV signal and sequentially with each addition requirement followed by those optimised for Higgsinos and sleptons. Weighted events are normalised to 36.1 fb<sup>-1</sup> and the raw Monte Carlo events are also displayed.
<b>Cutflow 8</b> Event counts for the χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> process of the Higgsino m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) = (110, 100) GeV signal and sequentially with each addition requirement for selections common to all signal regions (SRs). ``Lepton truth matching" requires that the selected leptons are consistent with being decay products of the SUSY process. ``Lepton author 16 veto" removes a class of electron candidates reconstructed with algorithms designed to identify photon conversions. Weighted events are normalised to 36.1 fb<sup>-1</sup> and the raw Monte Carlo events are also displayed.
<b>Cutflow 8</b> Event counts for the χ̃<sub>1</sub><sup>+</sup>χ̃<sub>1</sub><sup>-</sup> process of the Higgsino m(χ̃<sub>2</sub><sup>0</sup>, χ̃<sub>1</sub><sup>0</sup>) = (110, 100) GeV signal and sequentially with each addition requirement for selections common to all signal regions (SRs). ``Lepton truth matching" requires that the selected leptons are consistent with being decay products of the SUSY process. ``Lepton author 16 veto" removes a class of electron candidates reconstructed with algorithms designed to identify photon conversions. Weighted events are normalised to 36.1 fb<sup>-1</sup> and the raw Monte Carlo events are also displayed.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But, sometimes you may wish to be more specific. Here we show you how.
Guidance and examples on the query string syntax can be found in the Elasticsearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.