Showing 9 of 9 results
Measurements of the elliptic flow coefficient relative to the collision plane defined by the spectator neutrons $v_2${$\Psi_{\rm SP}$} in collisions of Pb ions at center-of-mass energy per nucleon-nucleon pair $\sqrt{s_{\rm NN}}$=2.76 TeV and Xe ions at $\sqrt{s_{\rm NN}}$=5.44 TeV are reported. The results are presented for charged particles produced at midrapidity as a function of centrality and transverse momentum. The ratio between $v_2${$\Psi_{\rm SP}$} and the elliptic flow coefficient relative to the participant plane $v_2$4, estimated using four-particle correlations, deviates by up to 20% from unity depending on centrality. This observation differs strongly from the magnitude of the corresponding eccentricity ratios predicted by the TRENTo and the elliptic power models of initial state fluctuations that are tuned to describe the participant plane anisotropies. The differences can be interpreted as a decorrelation of the neutron spectator plane and the reaction plane because of fragmentation of the remnants from the colliding nuclei, which points to an incompleteness of current models of initial state fluctuations. A significant transverse momentum dependence of the ratio $v_2${$\Psi_{\rm SP}$}/$v_2${4} is observed in all but the most central collisions, which may help to understand whether momentum anisotropies at low and intermediate transverse momentum have a common origin in initial state fluctuations. The ratios of $v_2${$\Psi_{\rm SP}$} and $v_2${4} to the corresponding initial state eccentricities for Xe-Xe and Pb-Pb collisions at similar initial entropy density show a difference of $(7.0 \pm 0.9)$% with an additional variation of +1.8% when including RHIC data in the TRENTo parameter extraction. These observations provide new experimental constraints for viscous effects in the hydrodynamic modeling of the expanding quark-gluon plasma.
Centrality dependence of $v_2\{\Psi_{\mathrm{SP}}\}$, $v_2\{2,|\Delta\eta|>1\}$, and $v_2\{4\}$ in Pb-Pb collisions at $\sqrt{s_{\mathrm{NN}}}=2.76~\mathrm{TeV}$.
Centrality dependence of $v_2\{\Psi_{\mathrm{SP}}\}$, $v_2\{2,|\Delta\eta|>1\}$, and $v_2\{4\}$ in Xe-Xe collisions at $\sqrt{s_{\mathrm{NN}}}=5.44~\mathrm{TeV}$.
Centrality dependence of $v_2\{\Psi_{\mathrm{SP}}\}/v_2\{4\}$ and $v_2\{2,|\Delta\eta|>1\}/v_2\{4\}$ in Pb-Pb collisions at $\sqrt{s_{\mathrm{NN}}}=2.76~\mathrm{TeV}$.
Centrality dependence of $v_2\{\Psi_{\mathrm{SP}}\}/v_2\{4\}$ and $v_2\{2,|\Delta\eta|>1\}/v_2\{4\}$ in Xe-Xe collisions at $\sqrt{s_{\mathrm{NN}}}=5.44~\mathrm{TeV}$.
Transverse momentum dependence of $v_2\{\Psi_{\mathrm{SP}}\}$ for different centrality classes in Pb-Pb collisions at $\sqrt{s_{\mathrm{NN}}}=2.76~\mathrm{TeV}$.
Transverse momentum dependence of $v_2\{4\}$ for different centrality classes in Pb-Pb collisions at $\sqrt{s_{\mathrm{NN}}}=2.76~\mathrm{TeV}$.
Transverse momentum dependence of $v_2\{\Psi_{\mathrm{SP}}\}/v_2\{4\}$ for different centrality classes in Pb-Pb collisions at $\sqrt{s_{\mathrm{NN}}}=2.76~\mathrm{TeV}$.
Slopes of the Linear fits to the transverse momentum dependence of $v_2\{\Psi_{\mathrm{SP}}\}/v_2\{4\}$ for different centrality classes in Pb-Pb collisions at $\sqrt{s_{\mathrm{NN}}}=2.76~\mathrm{TeV}$.
Ratios of $v_2/\varepsilon_2$ as a function of $1/S\ \mathrm{d}N_{\mathrm{ch}}/\mathrm{d}\eta$ in Xe--Xe collisions at $\sqrt{s_{\mathrm{NN}}}=5.44~\mathrm{TeV}$.
Ratios of $v_2/\varepsilon_2$ as a function of $1/S\ \mathrm{d}N_{\mathrm{ch}}/\mathrm{d}\eta$ in Pb--Pb collisions at $\sqrt{s_{\mathrm{NN}}}=2.76~\mathrm{TeV}$.
Ratios of $v_2/\varepsilon_2$ as a function of $1/S\ \mathrm{d}N_{\mathrm{ch}}/\mathrm{d}\eta$ in Xe--Xe collisions at $\sqrt{s_{\mathrm{NN}}}=5.44~\mathrm{TeV}$ divided by the linear Pb--Pb fits.
Ratios of $v_2/\varepsilon_2$ as a function of $1/S\ \mathrm{d}N_{\mathrm{ch}}/\mathrm{d}\eta$ for Pb--Pb collisions at $\sqrt{s_{\mathrm{NN}}}=2.76~\mathrm{TeV}$ divided by the linear Pb--Pb fits.
Relative deviation of $v_2/\varepsilon_2$ as a function of $1/S\ \mathrm{d}N_{\mathrm{ch}}/\mathrm{d}\eta$ in Pb--Pb and Xe--Xe collisions.
Measurements of the azimuthal anisotropy in lead-lead collisions at $\sqrt{s_\mathrm{NN}} = 5.02$ TeV are presented using a data sample corresponding to 0.49 $\mathrm{nb}^{-1}$ integrated luminosity collected by the ATLAS experiment at the LHC in 2015. The recorded minimum-bias sample is enhanced by triggers for "ultra-central" collisions, providing an opportunity to perform detailed study of flow harmonics in the regime where the initial state is dominated by fluctuations. The anisotropy of the charged-particle azimuthal angle distributions is characterized by the Fourier coefficients, $v_{2}-v_{7}$, which are measured using the two-particle correlation, scalar-product and event-plane methods. The goal of the paper is to provide measurements of the differential as well as integrated flow harmonics $v_{n}$ over wide ranges of the transverse momentum, 0.5 $
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%
The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%
The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 70-80%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 70-80%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 70-80%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%
The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%
The ratio of V2{SP} over V2{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V2{SP} over V2{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V2{SP} over V2{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V3{SP} over V3{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V3{SP} over V3{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V3{SP} over V3{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V4{SP} over V4{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V4{SP} over V4{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V4{SP} over V4{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V5{SP} over V5{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V5{SP} over V5{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V5{SP} over V5{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V6{SP} over V6{EP} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V6{SP} over V6{EP} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V6{SP} over V6{EP} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V2{SP} over V2{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V3{SP} over V3{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V4{SP} over V4{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V5{SP} over V5{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V6{SP} over V6{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The ratio of V2{SP} over V2{2PC} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V2{SP} over V2{2PC} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V2{SP} over V2{2PC} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V3{SP} over V3{2PC} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V3{SP} over V3{2PC} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V3{SP} over V3{2PC} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V4{SP} over V4{2PC} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V4{SP} over V4{2PC} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V4{SP} over V4{2PC} as a funtion of transverse momentum in centrality bin 40-50%
The ratio of V5{SP} over V5{2PC} as a funtion of transverse momentum in centrality bin 0-5%
The ratio of V5{SP} over V5{2PC} as a funtion of transverse momentum in centrality bin 20-30%
The ratio of V5{SP} over V5{2PC} as a funtion of transverse momentum in centrality bin 40-50%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 60-70%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-15%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-25%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-35%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-45%
The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-55%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-15%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-25%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-35%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-45%
The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-55%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 0-5%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 10-15%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 20-25%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 30-35%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 40-45%
The scaled-V2(PT) measured with the two particle correlation method in centrality bin 50-55%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 0-5%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 10-15%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 20-25%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 30-35%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 40-45%
The scaled-V3(PT) measured with the two particle correlation method in centrality bin 50-55%
The PT scale factor for V2(PT) as a funtion of collision centrality
The PT scale factor for V3(PT) as a funtion of collision centrality
The V2 scale factor as a funtion of collision centrality
The V3 scale factor as a funtion of collision centrality
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%
The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%
The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%
The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 60-70%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%
The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV
The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV
We present measurements of the elliptic ($\mathrm{v}_2$), triangular ($\mathrm{v}_3$) and quadrangular ($\mathrm{v}_4$) anisotropic azimuthal flow over a wide range of pseudorapidities ($-3.5< \eta < 5$). The measurements are performed with Pb-Pb collisions at $\sqrt{s_{\text{NN}}} = 2.76$ TeV using the ALICE detector at the Large Hadron Collider (LHC). The flow harmonics are obtained using two- and four-particle correlations from nine different centrality intervals covering central to peripheral collisions. We find that the shape of $\mathrm{v}_n(\eta)$ is largely independent of centrality for the flow harmonics $n=2-4$, however the higher harmonics fall off more steeply with increasing $|\eta|$. We assess the validity of extended longitudinal scaling of $\mathrm{v}_2$ by comparing to lower energy measurements, and find that the higher harmonic flow coefficients are proportional to the charged particle densities at larger pseudorapidities. Finally, we compare our measurements to both hydrodynamical and transport models, and find they both have challenges when it comes to describing our data.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
We report the first results of elliptic ($v_2$), triangular ($v_3$) and quadrangular flow ($v_4$) of charged particles in Pb-Pb collisions at $\sqrt{s_{\rm NN}}=5.02$ TeV with the ALICE detector at the CERN Large Hadron Collider. The measurements are performed in the central pseudorapidity region $|\eta|<0.8$ and for the transverse momentum range $0.2<p_{\rm T}<5$ GeV/$c$. The anisotropic flow is measured using two-particle correlations with a pseudorapidity gap greater than one unit and with the multi-particle cumulant method. Compared to results from Pb-Pb collisions at $\sqrt{s_{\rm NN}}=2.76$ TeV, the anisotropic flow coefficients $v_{2}$, $v_{3}$ and $v_{4}$ are found to increase by ($3.0\pm0.6$)%, ($4.3\pm1.4$)% and ($10.2\pm3.8$)%, respectively, in the centrality range 0-50%. This increase can be attributed mostly to an increase of the average transverse momentum between the two energies. The measurements are found to be compatible with hydrodynamic model calculations. This comparison provides a unique opportunity to test the validity of the hydrodynamic picture and the power to further discriminate between various possibilities for the temperature dependence of shear viscosity to entropy density ratio of the produced matter in heavy-ion collisions at the highest energies.
Centrality dependence of $v_2$, with two- and multi-particle correlations, integrated over the $p_{\rm T}$ range 0.2 < $p_{\rm T}$ < 5.0 GeV/$c$, at $\sqrt{s_{\rm NN}}$ = 5.02 TeV.
Centrality dependence of $v_2$, with two- and multi-particle correlations, integrated over the $p_{\rm T}$ range 0.2 < $p_{\rm T}$ < 5.0 GeV/$c$, at $\sqrt{s_{\rm NN}}$ = 5.02 TeV.
Centrality dependence of $v_3$ and $v_4$, with two-particle correlations, integrated over the $p_{\rm T}$ range 0.2 < $p_{\rm T}$ < 5.0 GeV/c, at $\sqrt{s_{\rm NN}}$ = 5.02 TeV.
Centrality dependence of $v_3$ and $v_4$, with two-particle correlations, integrated over the $p_{\rm T}$ range 0.2 < $p_{\rm T}$ < 5.0 GeV/c, at $\sqrt{s_{\rm NN}}$ = 5.02 TeV.
Centrality dependence of $v_2$, with two- and multi-particle correlations, integrated over the $p_{\rm T}$ range 0.2 < $p_{\rm T}$ < 5.0 GeV/c, at $\sqrt{s_{\rm NN}}$ = 2.76 TeV.
Centrality dependence of $v_2$, with two- and multi-particle correlations, integrated over the $p_{\rm T}$ range 0.2 < $p_{\rm T}$ < 5.0 GeV/c, at $\sqrt{s_{\rm NN}}$ = 2.76 TeV.
Centrality dependence of $v_3$ and $v_4$, with two-particle correlations, integrated over the $p_{\rm T}$ range 0.2 < $p_{\rm T}$ < 5.0 GeV/c, at $\sqrt{s_{\rm NN}}$ = 2.76 TeV.
Centrality dependence of $v_3$ and $v_4$, with two-particle correlations, integrated over the $p_{\rm T}$ range 0.2 < $p_{\rm T}$ < 5.0 GeV/c, at $\sqrt{s_{\rm NN}}$ = 2.76 TeV.
Ratio of $p_{\rm T}$-integrated $v_2$ between $\sqrt{s_{\rm NN}}$ = 5.02 and 2.76 TeV.
Ratio of $p_{\rm T}$-integrated $v_2$ between $\sqrt{s_{\rm NN}}$ = 5.02 and 2.76 TeV.
Ratio of $p_{\rm T}$-integrated $v_3$ and $v_4$ between $\sqrt{s_{\rm NN}}$ = 5.02 and 2.76 TeV.
Ratio of $p_{\rm T}$-integrated $v_3$ and $v_4$ between $\sqrt{s_{\rm NN}}$ = 5.02 and 2.76 TeV.
$p_{\rm T}$ dependence of $v_2$, $v_3$ and $v_4$ for centrality 0-5%.
$p_{\rm T}$ dependence of $v_2$, $v_3$ and $v_4$ for centrality 0-5%.
$p_{\rm T}$ dependence of $v_2$, $v_3$ and $v_4$ for centrality 30-40%.
$p_{\rm T}$ dependence of $v_2$, $v_3$ and $v_4$ for centrality 30-40%.
$p_{\rm T}$ dependence of $v_2${4} for centralities 10-20%, 20-30% and 30-40%.
$p_{\rm T}$ dependence of $v_2${4} for centralities 10-20%, 20-30% and 30-40%.
Ratio of $p_{\rm T}$-differential $v_2${4} between $\sqrt{s_{\rm NN}}$ = 5.02 and 2.76 TeV, for centrality 20-30%.
Ratio of $p_{\rm T}$-differential $v_2${4} between $\sqrt{s_{\rm NN}}$ = 5.02 and 2.76 TeV, for centrality 20-30%.
Fully $p_{\rm T}$-integrated $v_2${4} at $\sqrt{s_{\rm NN}}$ = 2.76 and 5.02 TeV, for centrality 20-30%.
Fully $p_{\rm T}$-integrated $v_2${4} at $\sqrt{s_{\rm NN}}$ = 2.76 and 5.02 TeV, for centrality 20-30%.
Correlations between the elliptic or triangular flow coefficients $v_m$ ($m$=2 or 3) and other flow harmonics $v_n$ ($n$=2 to 5) are measured using $\sqrt{s_{NN}}=2.76$ TeV Pb+Pb collision data collected in 2010 by the ATLAS experiment at the LHC, corresponding to an integrated lumonisity of 7 $\mu$b$^{-1}$. The $v_m$-$v_n$ correlations are measured in midrapidity as a function of centrality, and, for events within the same centrality interval, as a function of event ellipticity or triangularity defined in a forward rapidity region. For events within the same centrality interval, $v_3$ is found to be anticorrelated with $v_2$ and this anticorrelation is consistent with similar anticorrelations between the corresponding eccentricities $\epsilon_2$ and $\epsilon_3$. On the other hand, it is observed that $v_4$ increases strongly with $v_2$, and $v_5$ increases strongly with both $v_2$ and $v_3$. The trend and strength of the $v_m$-$v_n$ correlations for $n$=4 and 5 are found to disagree with $\epsilon_m$-$\epsilon_n$ correlations predicted by initial-geometry models. Instead, these correlations are found to be consistent with the combined effects of a linear contribution to $v_n$ and a nonlinear term that is a function of $v_2^2$ or of $v_2v_3$, as predicted by hydrodynamic models. A simple two-component fit is used to separate these two contributions. The extracted linear and nonlinear contributions to $v_4$ and $v_5$ are found to be consistent with previously measured event-plane correlations.
$v_{2}$ data for various $q_2$ bins, Centrality 0-5%.
$v_{3}$ data for various $q_2$ bins, Centrality 0-5%.
$v_{4}$ data for various $q_2$ bins, Centrality 0-5%.
$v_{5}$ data for various $q_2$ bins, Centrality 0-5%.
$v_{2}$ data for various $q_2$ bins, Centrality 5-10%.
$v_{3}$ data for various $q_2$ bins, Centrality 5-10%.
$v_{4}$ data for various $q_2$ bins, Centrality 5-10%.
$v_{5}$ data for various $q_2$ bins, Centrality 5-10%.
$v_{2}$ data for various $q_2$ bins, Centrality 10-15%.
$v_{3}$ data for various $q_2$ bins, Centrality 10-15%.
$v_{4}$ data for various $q_2$ bins, Centrality 10-15%.
$v_{5}$ data for various $q_2$ bins, Centrality 10-15%.
$v_{2}$ data for various $q_2$ bins, Centrality 15-20%.
$v_{3}$ data for various $q_2$ bins, Centrality 15-20%.
$v_{4}$ data for various $q_2$ bins, Centrality 15-20%.
$v_{5}$ data for various $q_2$ bins, Centrality 15-20%.
$v_{2}$ data for various $q_2$ bins, Centrality 20-25%.
$v_{3}$ data for various $q_2$ bins, Centrality 20-25%.
$v_{4}$ data for various $q_2$ bins, Centrality 20-25%.
$v_{5}$ data for various $q_2$ bins, Centrality 20-25%.
$v_{2}$ data for various $q_2$ bins, Centrality 25-30%.
$v_{3}$ data for various $q_2$ bins, Centrality 25-30%.
$v_{4}$ data for various $q_2$ bins, Centrality 25-30%.
$v_{5}$ data for various $q_2$ bins, Centrality 25-30%.
$v_{2}$ data for various $q_2$ bins, Centrality 30-35%.
$v_{3}$ data for various $q_2$ bins, Centrality 30-35%.
$v_{4}$ data for various $q_2$ bins, Centrality 30-35%.
$v_{5}$ data for various $q_2$ bins, Centrality 30-35%.
$v_{2}$ data for various $q_2$ bins, Centrality 35-40%.
$v_{3}$ data for various $q_2$ bins, Centrality 35-40%.
$v_{4}$ data for various $q_2$ bins, Centrality 35-40%.
$v_{5}$ data for various $q_2$ bins, Centrality 35-40%.
$v_{2}$ data for various $q_2$ bins, Centrality 40-45%.
$v_{3}$ data for various $q_2$ bins, Centrality 40-45%.
$v_{4}$ data for various $q_2$ bins, Centrality 40-45%.
$v_{5}$ data for various $q_2$ bins, Centrality 40-45%.
$v_{2}$ data for various $q_2$ bins, Centrality 45-50%.
$v_{3}$ data for various $q_2$ bins, Centrality 45-50%.
$v_{4}$ data for various $q_2$ bins, Centrality 45-50%.
$v_{5}$ data for various $q_2$ bins, Centrality 45-50%.
$v_{2}$ data for various $q_2$ bins, Centrality 50-55%.
$v_{3}$ data for various $q_2$ bins, Centrality 50-55%.
$v_{4}$ data for various $q_2$ bins, Centrality 50-55%.
$v_{5}$ data for various $q_2$ bins, Centrality 50-55%.
$v_{2}$ data for various $q_2$ bins, Centrality 55-60%.
$v_{3}$ data for various $q_2$ bins, Centrality 55-60%.
$v_{4}$ data for various $q_2$ bins, Centrality 55-60%.
$v_{5}$ data for various $q_2$ bins, Centrality 55-60%.
$v_{2}$ data for various $q_2$ bins, Centrality 60-65%.
$v_{3}$ data for various $q_2$ bins, Centrality 60-65%.
$v_{4}$ data for various $q_2$ bins, Centrality 60-65%.
$v_{5}$ data for various $q_2$ bins, Centrality 60-65%.
$v_{2}$ data for various $q_2$ bins, Centrality 65-70%.
$v_{3}$ data for various $q_2$ bins, Centrality 65-70%.
$v_{4}$ data for various $q_2$ bins, Centrality 65-70%.
$v_{5}$ data for various $q_2$ bins, Centrality 65-70%.
$v_{2}$ data for various $q_2$ bins, Centrality 0-10%.
$v_{3}$ data for various $q_2$ bins, Centrality 0-10%.
$v_{4}$ data for various $q_2$ bins, Centrality 0-10%.
$v_{5}$ data for various $q_2$ bins, Centrality 0-10%.
$v_{2}$ data for various $q_2$ bins, Centrality 10-20%.
$v_{3}$ data for various $q_2$ bins, Centrality 10-20%.
$v_{4}$ data for various $q_2$ bins, Centrality 10-20%.
$v_{5}$ data for various $q_2$ bins, Centrality 10-20%.
$v_{2}$ data for various $q_2$ bins, Centrality 20-30%.
$v_{3}$ data for various $q_2$ bins, Centrality 20-30%.
$v_{4}$ data for various $q_2$ bins, Centrality 20-30%.
$v_{5}$ data for various $q_2$ bins, Centrality 20-30%.
$v_{2}$ data for various $q_2$ bins, Centrality 30-40%.
$v_{3}$ data for various $q_2$ bins, Centrality 30-40%.
$v_{4}$ data for various $q_2$ bins, Centrality 30-40%.
$v_{5}$ data for various $q_2$ bins, Centrality 30-40%.
$v_{2}$ data for various $q_2$ bins, Centrality 40-50%.
$v_{3}$ data for various $q_2$ bins, Centrality 40-50%.
$v_{4}$ data for various $q_2$ bins, Centrality 40-50%.
$v_{5}$ data for various $q_2$ bins, Centrality 40-50%.
$v_{2}$ data for various $q_3$ bins, Centrality 0-5%.
$v_{3}$ data for various $q_3$ bins, Centrality 0-5%.
$v_{4}$ data for various $q_3$ bins, Centrality 0-5%.
$v_{5}$ data for various $q_3$ bins, Centrality 0-5%.
$v_{2}$ data for various $q_3$ bins, Centrality 5-10%.
$v_{3}$ data for various $q_3$ bins, Centrality 5-10%.
$v_{4}$ data for various $q_3$ bins, Centrality 5-10%.
$v_{5}$ data for various $q_3$ bins, Centrality 5-10%.
$v_{2}$ data for various $q_3$ bins, Centrality 10-15%.
$v_{3}$ data for various $q_3$ bins, Centrality 10-15%.
$v_{4}$ data for various $q_3$ bins, Centrality 10-15%.
$v_{5}$ data for various $q_3$ bins, Centrality 10-15%.
$v_{2}$ data for various $q_3$ bins, Centrality 15-20%.
$v_{3}$ data for various $q_3$ bins, Centrality 15-20%.
$v_{4}$ data for various $q_3$ bins, Centrality 15-20%.
$v_{5}$ data for various $q_3$ bins, Centrality 15-20%.
$v_{2}$ data for various $q_3$ bins, Centrality 20-25%.
$v_{3}$ data for various $q_3$ bins, Centrality 20-25%.
$v_{4}$ data for various $q_3$ bins, Centrality 20-25%.
$v_{5}$ data for various $q_3$ bins, Centrality 20-25%.
$v_{2}$ data for various $q_3$ bins, Centrality 25-30%.
$v_{3}$ data for various $q_3$ bins, Centrality 25-30%.
$v_{4}$ data for various $q_3$ bins, Centrality 25-30%.
$v_{5}$ data for various $q_3$ bins, Centrality 25-30%.
$v_{2}$ data for various $q_3$ bins, Centrality 30-35%.
$v_{3}$ data for various $q_3$ bins, Centrality 30-35%.
$v_{4}$ data for various $q_3$ bins, Centrality 30-35%.
$v_{5}$ data for various $q_3$ bins, Centrality 30-35%.
$v_{2}$ data for various $q_3$ bins, Centrality 35-40%.
$v_{3}$ data for various $q_3$ bins, Centrality 35-40%.
$v_{4}$ data for various $q_3$ bins, Centrality 35-40%.
$v_{5}$ data for various $q_3$ bins, Centrality 35-40%.
$v_{2}$ data for various $q_3$ bins, Centrality 40-45%.
$v_{3}$ data for various $q_3$ bins, Centrality 40-45%.
$v_{4}$ data for various $q_3$ bins, Centrality 40-45%.
$v_{5}$ data for various $q_3$ bins, Centrality 40-45%.
$v_{2}$ data for various $q_3$ bins, Centrality 45-50%.
$v_{3}$ data for various $q_3$ bins, Centrality 45-50%.
$v_{4}$ data for various $q_3$ bins, Centrality 45-50%.
$v_{5}$ data for various $q_3$ bins, Centrality 45-50%.
$v_{2}$ data for various $q_3$ bins, Centrality 50-55%.
$v_{3}$ data for various $q_3$ bins, Centrality 50-55%.
$v_{4}$ data for various $q_3$ bins, Centrality 50-55%.
$v_{5}$ data for various $q_3$ bins, Centrality 50-55%.
$v_{2}$ data for various $q_3$ bins, Centrality 55-60%.
$v_{3}$ data for various $q_3$ bins, Centrality 55-60%.
$v_{4}$ data for various $q_3$ bins, Centrality 55-60%.
$v_{5}$ data for various $q_3$ bins, Centrality 55-60%.
$v_{2}$ data for various $q_3$ bins, Centrality 60-65%.
$v_{3}$ data for various $q_3$ bins, Centrality 60-65%.
$v_{4}$ data for various $q_3$ bins, Centrality 60-65%.
$v_{5}$ data for various $q_3$ bins, Centrality 60-65%.
$v_{2}$ data for various $q_3$ bins, Centrality 65-70%.
$v_{3}$ data for various $q_3$ bins, Centrality 65-70%.
$v_{4}$ data for various $q_3$ bins, Centrality 65-70%.
$v_{5}$ data for various $q_3$ bins, Centrality 65-70%.
$v_{2}$ data for various $q_3$ bins, Centrality 0-10%.
$v_{3}$ data for various $q_3$ bins, Centrality 0-10%.
$v_{4}$ data for various $q_3$ bins, Centrality 0-10%.
$v_{5}$ data for various $q_3$ bins, Centrality 0-10%.
$v_{2}$ data for various $q_3$ bins, Centrality 10-20%.
$v_{3}$ data for various $q_3$ bins, Centrality 10-20%.
$v_{4}$ data for various $q_3$ bins, Centrality 10-20%.
$v_{5}$ data for various $q_3$ bins, Centrality 10-20%.
$v_{2}$ data for various $q_3$ bins, Centrality 20-30%.
$v_{3}$ data for various $q_3$ bins, Centrality 20-30%.
$v_{4}$ data for various $q_3$ bins, Centrality 20-30%.
$v_{5}$ data for various $q_3$ bins, Centrality 20-30%.
$v_{2}$ data for various $q_3$ bins, Centrality 30-40%.
$v_{3}$ data for various $q_3$ bins, Centrality 30-40%.
$v_{4}$ data for various $q_3$ bins, Centrality 30-40%.
$v_{5}$ data for various $q_3$ bins, Centrality 30-40%.
$v_{2}$ data for various $q_3$ bins, Centrality 40-50%.
$v_{3}$ data for various $q_3$ bins, Centrality 40-50%.
$v_{4}$ data for various $q_3$ bins, Centrality 40-50%.
$v_{5}$ data for various $q_3$ bins, Centrality 40-50%.
$v_{2}$ - $v_{2}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{2}$ correlation within each centrality.
$v_{2}$ - $v_{2}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{2}$ correlation within each centrality.
$v_{2}$ - $v_{2}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{2}$ correlation within each centrality.
$v_{2}$ - $v_{2}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{2}$ correlation within each centrality.
$v_{2}$ - $v_{2}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{2}$ correlation within each centrality.
$v_{3}$ - $v_{3}$ inclusive correlation in 5% centrality intervals.
$v_{3}$ - $v_{3}$ correlation within each centrality.
$v_{3}$ - $v_{3}$ inclusive correlation in 5% centrality intervals.
$v_{3}$ - $v_{3}$ correlation within each centrality.
$v_{3}$ - $v_{3}$ inclusive correlation in 5% centrality intervals.
$v_{3}$ - $v_{3}$ correlation within each centrality.
$v_{3}$ - $v_{3}$ inclusive correlation in 5% centrality intervals.
$v_{3}$ - $v_{3}$ correlation within each centrality.
$v_{2}$ - $v_{3}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{3}$ correlation for various q2 bins within each centrality.
$v_{2}$ - $v_{3}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{3}$ correlation for various q2 bins within each centrality.
$v_{2}$ - $v_{3}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{3}$ correlation for various q2 bins within each centrality.
$v_{2}$ - $v_{3}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{3}$ correlation for various q2 bins within each centrality.
linear fit result of $v_{2}$ - $v_{3}$ correlation within each centrality.
$v_{3}$ - $v_{2}$ inclusive correlation in 5% centrality intervals.
$v_{3}$ - $v_{2}$ correlation for various q3 bins within each centrality.
$v_{3}$ - $v_{2}$ inclusive correlation in 5% centrality intervals.
$v_{3}$ - $v_{2}$ correlation for various q3 bins within each centrality.
$v_{3}$ - $v_{2}$ inclusive correlation in 5% centrality intervals.
$v_{3}$ - $v_{2}$ correlation for various q3 bins within each centrality.
$v_{3}$ - $v_{2}$ inclusive correlation in 5% centrality intervals.
$v_{3}$ - $v_{2}$ correlation for various q3 bins within each centrality.
$v_{2}$ - $v_{4}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{4}$ correlation for various q2 bins within each centrality.
$v_{2}$ - $v_{4}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{4}$ correlation for various q2 bins within each centrality.
$v_{2}$ - $v_{4}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{4}$ correlation for various q2 bins within each centrality.
$v_{2}$ - $v_{4}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{4}$ correlation for various q2 bins within each centrality.
$v_{3}$ - $v_{4}$ inclusive correlation in 5% centrality intervals.
$v_{3}$ - $v_{4}$ correlation within each centrality.
$v_{3}$ - $v_{4}$ inclusive correlation in 5% centrality intervals.
$v_{3}$ - $v_{4}$ correlation within each centrality.
$v_4$ decomposed into linear and nonlinear contributions based on q2 event-shape selection.
$v_4$ decomposed into linear and nonlinear contributions based on q2 event-shape selection.
$v_4$ decomposed into linear and nonlinear contributions based on q2 event-shape selection.
$v_4$ decomposed into linear and nonlinear contributions based on q2 event-shape selection.
$v_4$ decomposed into linear and nonlinear contributions based on q2 event-shape selection.
$v_5$ decomposed into linear and nonlinear contributions based on q2 event-shape selection.
$v_5$ decomposed into linear and nonlinear contributions based on q3 event-shape selection.
RMS eccentricity scaled v_n.
RMS eccentricity scaled v_n.
$v_{2}$ - $v_{5}$ inclusive correlation in 5% centrality intervals.
$v_{2}$ - $v_{5}$ correlation for various q2 bins within each centrality.
$v_{3}$ - $v_{5}$ inclusive correlation in 5% centrality intervals.
$v_{3}$ - $v_{5}$ correlation for various q2 bins within each centrality.
Measurements of two-particle correlation functions and the first five azimuthal harmonics, $v_1$ to $v_5$, are presented, using 28 $\mathrm{nb}^{-1}$ of $p$+Pb collisions at a nucleon-nucleon center-of-mass energy of $\sqrt{s_{\mathrm{NN}}}=5.02$ TeV measured with the ATLAS detector at the LHC. Significant long-range "ridge-like" correlations are observed for pairs with small relative azimuthal angle ($|\Delta\phi|<\pi/3$) and back-to-back pairs ($|\Delta\phi| > 2\pi/3$) over the transverse momentum range $0.4 < p_{\rm T} < 12$ GeV and in different intervals of event activity. The event activity is defined by either the number of reconstructed tracks or the total transverse energy on the Pb-fragmentation side. The azimuthal structure of such long-range correlations is Fourier decomposed to obtain the harmonics $v_n$ as a function of $p_{\rm T}$ and event activity. The extracted $v_n$ values for $n=2$ to 5 decrease with $n$. The $v_2$ and $v_3$ values are found to be positive in the measured $p_{\rm T}$ range. The $v_1$ is also measured as a function of $p_{\rm T}$ and is observed to change sign around $p_{\rm T}\approx 1.5$-2.0 GeV and then increase to about 0.1 for $p_{\rm T}>4$ GeV. The $v_2(p_{\rm T})$, $v_3(p_{\rm T})$ and $v_4(p_{\rm T})$ are compared to the $v_n$ coefficients in Pb+Pb collisions at $\sqrt{s_{\mathrm{NN}}} =2.76$ TeV with similar event multiplicities. Reasonable agreement is observed after accounting for the difference in the average $p_{\rm T}$ of particles produced in the two collision systems.
The distributions of $N_{ch}^{rec}$ for MB and MB+HMT after applying an event-by-event weight, errors are statistical.
The distributions of $E_{T}^{Pb}$ [GeV] for MB and MB+HMT after applying an event-by-event weight, errors are statistical.
Per-trigger yield in 2D, $Y$($\Delta\phi$,$\Delta\eta$), for events with $E_{T}^{Pb} <$ 10 GeV and $N_{ch}^{rec} \geq$ 200 and recoil-subtracted per-trigger yield, $Y^{sub}$($\Delta\phi$,$\Delta\eta$) for events with $N_{ch}^{rec} \geq$ 200. Errors are statistical.
$v_{2,2}^{unsub}$ and $v_{2,2}$ as a function of $\Delta\eta$ calculated from the 2-D per-trigger yields in figure 4(a) and 4(b), respectively.
$v_{3,3}^{unsub}$ and $v_{3,3}$ as a function of $\Delta\eta$ calculated from the 2-D per-trigger yields in figure 4(a) and 4(b), respectively.
$v_{4,4}^{unsub}$ and $v_{4,4}$ as a function of $\Delta\eta$ calculated from the 2-D per-trigger yields in figure 4(a) and 4(b), respectively.
The per-trigger yield distributions $Y^{corr}(\Delta\phi)$ and $Y^{recoil}(\Delta\phi)$ for events with $N_{ch}^{rec} \geq$ 220 in the long-range region $|\Delta\eta| >$ 2.
The per-trigger yield distributions $Y^{corr}(\Delta\phi)$ and $Y^{recoil}(\Delta\phi)$ for events with $N_{ch}^{rec} \geq$ 220 in the long-range region $|\Delta\eta| >$ 2.
The per-trigger yield distributions $Y^{corr}(\Delta\phi)$ and $Y^{recoil}(\Delta\phi)$ for events with $N_{ch}^{rec} \geq$ 220 in the long-range region $|\Delta\eta| >$ 2.
The per-trigger yield distributions $Y^{corr}(\Delta\phi)$ and $Y^{recoil}(\Delta\phi)$ for events with $N_{ch}^{rec} \geq$ 220 in the long-range region $|\Delta\eta| >$ 2.
The per-trigger yield distributions $Y^{corr}(\Delta\phi)$ and $Y^{recoil}(\Delta\phi)$ for events with $N_{ch}^{rec} \geq$ 220 in the long-range region $|\Delta\eta| >$ 2.
The per-trigger yield distributions $Y^{corr}(\Delta\phi)$ and $Y^{recoil}(\Delta\phi)$ for events with $N_{ch}^{rec} \geq$ 220 in the long-range region $|\Delta\eta| >$ 2.
The per-trigger yield distributions $Y^{corr}(\Delta\phi)$ and $Y^{recoil}(\Delta\phi)$ for events with $N_{ch}^{rec} \geq$ 220 in the long-range region $|\Delta\eta| >$ 2.
Integrated per-trigger yield, $Y_{int}$, on the near-side as a function of $p_{T}^{a}$ for 1 $< p_{T}^{b} <$ 3 GeV.
Integrated per-trigger yield, $Y_{int}$, on the near-side as a function of $p_{T}^{a}$ for 1 $< p_{T}^{b} <$ 3 GeV.
Integrated per-trigger yield, $Y_{int}$, on the near-side as a function of $p_{T}^{a}$ for 1 $< p_{T}^{b} <$ 3 GeV.
Integrated per-trigger yield, $Y_{int}$, on the near-side as a function of $p_{T}^{a}$ for 1 $< p_{T}^{b} <$ 3 GeV.
Integrated per-trigger yield, $Y_{int}$, on the near-side as a function of $p_{T}^{a}$ for 1 $< p_{T}^{b} <$ 3 GeV.
Integrated per-trigger yield, $Y_{int}$, on the away-side as a function of $p_{T}^{a}$ for 1 $< p_{T}^{b} <$ 3 GeV.
Integrated per-trigger yield, $Y_{int}$, on the away-side as a function of $p_{T}^{a}$ for 1 $< p_{T}^{b} <$ 3 GeV.
Integrated per-trigger yield, $Y_{int}$, on the away-side as a function of $p_{T}^{a}$ for 1 $< p_{T}^{b} <$ 3 GeV.
Integrated per-trigger yield, $Y_{int}$, on the away-side as a function of $p_{T}^{a}$ for 1 $< p_{T}^{b} <$ 3 GeV.
Integrated per-trigger yield, $Y_{int}$, on the away-side as a function of $p_{T}^{a}$ for 1 $< p_{T}^{b} <$ 3 GeV.
The integrated per-trigger yield, Y_{int}, on the near-side, the away-side and their difference and Y_{int} from the recoil as a function of event activity. Errors are statistical.
The integrated per-trigger yield, Y_{int}, on the near-side, the away-side and their difference and Y_{int} from the recoil as a function of event activity. Errors are statistical.
The Fourier coefficients $v_{n}$ as a function of $p_{T}^{a}$ extracted from the correlation functions, before and after the subtraction of the recoil component.
The Fourier coefficients $v_{n}$ as a function of $p_{T}^{a}$ extracted from the correlation functions, before and after the subtraction of the recoil component.
The Fourier coefficients $v_{n}$ as a function of $p_{T}^{a}$ extracted from the correlation functions, before and after the subtraction of the recoil component.
$v_{2}$, $v_{3}$, $v_{4}$ and $v_{5}$ as a function of $p_T^a$ for 1 $< p_{T}^{b} <$ 3 GeV for different $N_{ch}^{rec}$ intervals.
$v_{2}$, $v_{3}$, $v_{4}$ and $v_{5}$ as a function of $p_T^a$ for 1 $< p_{T}^{b} <$ 3 GeV for different $N_{ch}^{rec}$ intervals.
$v_{2}$, $v_{3}$, $v_{4}$ and $v_{5}$ as a function of $p_T^a$ for 1 $< p_{T}^{b} <$ 3 GeV for different $N_{ch}^{rec}$ intervals.
$v_{2}$, $v_{3}$, $v_{4}$ and $v_{5}$ as a function of $p_T^a$ for 1 $< p_{T}^{b} <$ 3 GeV for different $N_{ch}^{rec}$ intervals.
$v_{2}$, $v_{3}$, $v_{4}$ and $v_{5}$ as a function of $p_T^a$ for 1 $< p_{T}^{b} <$ 3 GeV for different $N_{ch}^{rec}$ intervals.
$v_{2}$, $v_{3}$, $v_{4}$ and $v_{5}$ as a function of $p_T^a$ for 1 $< p_{T}^{b} <$ 3 GeV for different $N_{ch}^{rec}$ intervals.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{2}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{3}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{3}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{3}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{3}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{3}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{3}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{3}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{3}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{3}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{3}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{3}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The values of factorization variable $r_{3}$ defined by Eq.(11) before and after the subtraction of the recoil component. Errors are total experimental uncertainties.
The centrality dependence of $v_{2}$ as a function of $N_{ch}^{rec}$. Values from before and after the recoil subtraction are included.
The centrality dependence of $v_{3}$ as a function of $N_{ch}^{rec}$. Values from before and after the recoil subtraction are included.
The centrality dependence of $v_{4}$ as a function of $N_{ch}^{rec}$. Values from before and after the recoil subtraction are included.
The centrality dependence of $v_{2}$ as a function of $E_{T}^{Pb}$. Values from before and after the recoil subtraction are included.
The centrality dependence of $v_{3}$ as a function of $E_{T}^{Pb}$. Values from before and after the recoil subtraction are included.
The centrality dependence of $v_{4}$ as a function of $E_{T}^{Pb}$. Values from before and after the recoil subtraction are included.
The $v_{2}$ as a function of $E_{T}^{Pb}$ obtained indirectly by mapping from the $N_{ch}^{rec}-dependence of $v_{2}$ using the correlation data shown in Fig. 2(b).
The $v_{3}$ as a function of $E_{T}^{Pb}$ obtained indirectly by mapping from the $N_{ch}^{rec}-dependence of $v_{3}$ using the correlation data shown in Fig. 2(b).
The first-order harmonic of 2PC before recoil subtraction, $v_{1,1}^{unsub}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic of 2PC before recoil subtraction, $v_{1,1}^{unsub}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic of 2PC before recoil subtraction, $v_{1,1}^{unsub}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic of 2PC before recoil subtraction, $v_{1,1}^{unsub}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic of 2PC before recoil subtraction, $v_{1,1}^{unsub}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic of 2PC before recoil subtraction, $v_{1,1}^{unsub}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic of 2PC after recoil subtraction, $v_{1,1}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic of 2PC after recoil subtraction, $v_{1,1}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic of 2PC after recoil subtraction, $v_{1,1}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic of 2PC after recoil subtraction, $v_{1,1}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic of 2PC after recoil subtraction, $v_{1,1}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic of 2PC after recoil subtraction, $v_{1,1}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic $v_1$ obtained using factorization from $v_{1,1}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic $v_1$ obtained using factorization from $v_{1,1}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
The first-order harmonic $v_1$ obtained using factorization from $v_{1,1}$, as a function of $p_T^a$ for different $p_T^b$ ranges for events with $N_{ch}^{rec} \geq$ 220.
$v_{2}$ for Pb+Pb collisions in 55-60% centrality interval obtained using an EP method.
$v_{2}$ for Pb+Pb collisions in 55-60% centrality interval obtained using an EP method, after the scaling.
$v_{3}$ for Pb+Pb collisions in 55-60% centrality interval obtained using an EP method.
$v_{3}$ for Pb+Pb collisions in 55-60% centrality interval obtained using an EP method, after the scaling.
$v_{4}$ for Pb+Pb collisions in 55-60% centrality interval obtained using an EP method.
Measurements of multi-particle azimuthal correlations (cumulants) for charged particles in p-Pb and Pb-Pb collisions are presented. They help address the question of whether there is evidence for global, flow-like, azimuthal correlations in the p-Pb system. Comparisons are made to measurements from the larger Pb-Pb system, where such evidence is established. In particular, the second harmonic two-particle cumulants are found to decrease with multiplicity, characteristic of a dominance of few-particle correlations in p-Pb collisions. However, when a $|\Delta \eta|$ gap is placed to suppress such correlations, the two-particle cumulants begin to rise at high-multiplicity, indicating the presence of global azimuthal correlations. The Pb-Pb values are higher than the p-Pb values at similar multiplicities. In both systems, the second harmonic four-particle cumulants exhibit a transition from positive to negative values when the multiplicity increases. The negative values allow for a measurement of $v_{2}\{4\}$ to be made, which is found to be higher in Pb-Pb collisions at similar multiplicities. The second harmonic six-particle cumulants are also found to be higher in Pb-Pb collisions. In Pb-Pb collisions, we generally find $v_{2}\{4\} \simeq v_{2}\{6\}\neq 0$ which is indicative of a Bessel-Gaussian function for the $v_{2}$ distribution. For very high-multiplicity Pb-Pb collisions, we observe that the four- and six-particle cumulants become consistent with 0. Finally, third harmonic two-particle cumulants in p-Pb and Pb-Pb are measured. These are found to be similar for overlapping multiplicities, when a $|\Delta\eta| > 1.4$ gap is placed.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
The anisotropy of the azimuthal distributions of charged particles produced in PbPb collisions with a nucleon-nucleon center-of-mass energy of 2.76 TeV is studied with the CMS experiment at the LHC. The elliptic anisotropy parameter defined as the second coefficient in a Fourier expansion of the particle invariant yields, is extracted using the event-plane method, two- and four-particle cumulants, and Lee--Yang zeros. The anisotropy is presented as a function of transverse momentum (pt), pseudorapidity (eta) over a broad kinematic range: 0.3 < pt < 20 GeV, abs(eta) < 2.4, and in 12 classes of collision centrality from 0 to 80%. The results are compared to those obtained at lower center-of-mass energies, and various scaling behaviors are examined. When scaled by the geometric eccentricity of the collision zone, the elliptic anisotropy is found to obey a universal scaling with the transverse particle density for different collision systems and center-of-mass energies.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 0-5%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 5-10%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 10-15%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 15-20%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 20-25%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 25-30%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 30-35%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 35-40%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 40-50%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 50-60%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 60-70%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 70-80%.
Measurements of the second-order elliptic anisotropy parameter using the cumulant method, V2(C2) v PT for the centrality range 0-5%.
Measurements of the second-order elliptic anisotropy parameter using the cumulant method, V2(C2) v PT for the centrality range 5-10%.
Measurements of the second-order elliptic anisotropy parameter using the cumulant method, V2(C2) v PT for the centrality range 10-15%.
Measurements of the second-order elliptic anisotropy parameter using the cumulant method, V2(C2) v PT for the centrality range 15-20%.
Measurements of the second-order elliptic anisotropy parameter using the cumulant method, V2(C2) v PT for the centrality range 20-25%.
Measurements of the second-order elliptic anisotropy parameter using the cumulant method, V2(C2) v PT for the centrality range 25-30%.
Measurements of the second-order elliptic anisotropy parameter using the cumulant method, V2(C2) v PT for the centrality range 30-35%.
Measurements of the second-order elliptic anisotropy parameter using the cumulant method, V2(C2) v PT for the centrality range 35-40%.
Measurements of the second-order elliptic anisotropy parameter using the cumulant method, V2(C2) v PT for the centrality range 40-50%.
Measurements of the second-order elliptic anisotropy parameter using the cumulant method, V2(C2) v PT for the centrality range 50-60%.
Measurements of the second-order elliptic anisotropy parameter using the cumulant method, V2(C2) v PT for the centrality range 60-70%.
Measurements of the second-order elliptic anisotropy parameter using the cumulant method, V2(C2) v PT for the centrality range 70-80%.
Measurements of the fourth-order elliptic anisotropy parameter using the cumulant method, V2(C4) v PT for the centrality range 5-10%.
Measurements of the fourth-order elliptic anisotropy parameter using the cumulant method, V2(C4) v PT for the centrality range 10-15%.
Measurements of the fourth-order elliptic anisotropy parameter using the cumulant method, V2(C4) v PT for the centrality range 15-20%.
Measurements of the fourth-order elliptic anisotropy parameter using the cumulant method, V2(C4) v PT for the centrality range 20-25%.
Measurements of the fourth-order elliptic anisotropy parameter using the cumulant method, V2(C4) v PT for the centrality range 25-30%.
Measurements of the fourth-order elliptic anisotropy parameter using the cumulant method, V2(C4) v PT for the centrality range 30-35%.
Measurements of the fourth-order elliptic anisotropy parameter using the cumulant method, V2(C4) v PT for the centrality range 35-40%.
Measurements of the fourth-order elliptic anisotropy parameter using the cumulant method, V2(C4) v PT for the centrality range 40-50%.
Measurements of the fourth-order elliptic anisotropy parameter using the cumulant method, V2(C4) v PT for the centrality range 50-60%.
Measurements of the fourth-order elliptic anisotropy parameter using the cumulant method, V2(C4) v PT for the centrality range 60-70%.
Measurements of the elliptic anisotropy parameter using the Lee-Yang zeros method, V2(LYZ) v PT for the centrality range 5-10%.
Measurements of the elliptic anisotropy parameter using the Lee-Yang zeros method, V2(LYZ) v PT for the centrality range 10-15%.
Measurements of the elliptic anisotropy parameter using the Lee-Yang zeros method, V2(LYZ) v PT for the centrality range 15-20%.
Measurements of the elliptic anisotropy parameter using the Lee-Yang zeros method, V2(LYZ) v PT for the centrality range 20-25%.
Measurements of the elliptic anisotropy parameter using the Lee-Yang zeros method, V2(LYZ) v PT for the centrality range 25-30%.
Measurements of the elliptic anisotropy parameter using the Lee-Yang zeros method, V2(LYZ) v PT for the centrality range 30-35%.
Measurements of the elliptic anisotropy parameter using the Lee-Yang zeros method, V2(LYZ) v PT for the centrality range 35-40%.
Measurements of the elliptic anisotropy parameter using the Lee-Yang zeros method, V2(LYZ) v PT for the centrality range 40-50%.
Integrtated V2 as a function of centrality.
Pseudorapidity dependence of V2 for centrality 0-5%.
Pseudorapidity dependence of V2 for centrality 5-10%.
Pseudorapidity dependence of V2 for centrality 10-15%.
Pseudorapidity dependence of V2 for centrality 15-20%.
Pseudorapidity dependence of V2 for centrality 20-25%.
Pseudorapidity dependence of V2 for centrality 25-30%.
Pseudorapidity dependence of V2 for centrality 30-35%.
Pseudorapidity dependence of V2 for centrality 35-40%.
Pseudorapidity dependence of V2 for centrality 40-50%.
Pseudorapidity dependence of V2 for centrality 50-60%.
Pseudorapidity dependence of V2 for centrality 60-70%.
Pseudorapidity dependence of V2 for centrality 70-80%.
PT dependence of V2(EP) for centrality 0-5% and |eta| ranges 0.0-0.4, 0.4-0.8 and 0.8-1.2.
PT dependence of V2(EP) for centrality 0-5% and |eta| ranges 1.2-1.6, 1.6-2.0 and 2.0-2.4.
PT dependence of V2(EP) for centrality 5-10% and |eta| ranges 0.0-0.4, 0.4-0.8 and 0.8-1.2.
PT dependence of V2(EP) for centrality 5-10% and |eta| ranges 1.2-1.6, 1.6-2.0 and 2.0-2.4.
PT dependence of V2(EP) for centrality 10-15% and |eta| ranges 0.0-0.4, 0.4-0.8 and 0.8-1.2.
PT dependence of V2(EP) for centrality 10-15% and |eta| ranges 1.2-1.6, 1.6-2.0 and 2.0-2.4.
PT dependence of V2(EP) for centrality 15-20% and |eta| ranges 0.0-0.4, 0.4-0.8 and 0.8-1.2.
PT dependence of V2(EP) for centrality 15-20% and |eta| ranges 1.2-1.6, 1.6-2.0 and 2.0-2.4.
PT dependence of V2(EP) for centrality 20-25% and |eta| ranges 0.0-0.4, 0.4-0.8 and 0.8-1.2.
PT dependence of V2(EP) for centrality 20-25% and |eta| ranges 1.2-1.6, 1.6-2.0 and 2.0-2.4.
PT dependence of V2(EP) for centrality 25-30% and |eta| ranges 0.0-0.4, 0.4-0.8 and 0.8-1.2.
PT dependence of V2(EP) for centrality 25-30% and |eta| ranges 1.2-1.6, 1.6-2.0 and 2.0-2.4.
PT dependence of V2(EP) for centrality 30-35% and |eta| ranges 0.0-0.4, 0.4-0.8 and 0.8-1.2.
PT dependence of V2(EP) for centrality 30-35% and |eta| ranges 1.2-1.6, 1.6-2.0 and 2.0-2.4.
PT dependence of V2(EP) for centrality 35-40% and |eta| ranges 0.0-0.4, 0.4-0.8 and 0.8-1.2.
PT dependence of V2(EP) for centrality 35-40% and |eta| ranges 1.2-1.6, 1.6-2.0 and 2.0-2.4.
PT dependence of V2(EP) for centrality 40-50% and |eta| ranges 0.0-0.4, 0.4-0.8 and 0.8-1.2.
PT dependence of V2(EP) for centrality 40-50% and |eta| ranges 1.2-1.6, 1.6-2.0 and 2.0-2.4.
PT dependence of V2(EP) for centrality 50-60% and |eta| ranges 0.0-0.4, 0.4-0.8 and 0.8-1.2.
PT dependence of V2(EP) for centrality 50-60% and |eta| ranges 1.2-1.6, 1.6-2.0 and 2.0-2.4.
PT dependence of V2(EP) for centrality 60-70% and |eta| ranges 0.0-0.4, 0.4-0.8 and 0.8-1.2.
PT dependence of V2(EP) for centrality 60-70% and |eta| ranges 1.2-1.6, 1.6-2.0 and 2.0-2.4.
PT dependence of V2(EP) for centrality 70-80% and |eta| ranges 0.0-0.4, 0.4-0.8 and 0.8-1.2.
PT dependence of V2(EP) for centrality 70-80% and |eta| ranges 1.2-1.6, 1.6-2.0 and 2.0-2.4.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 0-10%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 10-20%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 20-30%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 30-40%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 40-50%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 50-60%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 60-70%.
Measurements of the elliptic anisotropy parameter using the event-plane method, V2(EP) v PT for the centrality range 70-80%.
Measurements of the second- and fourth-order elliptic anisotropy parameters using the cumulant method v PT for the centrality range 20-60%.
Integrated V2 value extrapolated to PT=0 for the 20-30% centrality range using the event-plane method. Error is combined statistical and systematic.
Integrated V2 values from the event-plane method divided by the participant eccentricity (EPSILON) as a function of the number of participating nucleons (NPART) for the |eta| range <0.8 and PT range 0-3 GeV. Also shown are the correspnding centrality bin ranges.
Eccentricity-scaled V2 as a function of the transverse charged-particle density normalised by the transverse overlap area (S).
The dependence of V2 from the event-plane method on the pseudorapidity, transformed to the rest frame of nuclei moving separately in the positive(negative) directions by adding(subtracting) the beam rapidity,YBEAM. +(-)ve values are from +(-)YBEAM.
This paper describes the measurement of elliptic flow of charged particles in lead-lead collisions at sqrt(s_NN) = 2.76 TeV using the ATLAS detector at the Large Hadron Collider (LHC). The results are based on an integrated luminosity of approximately 7 ub^-1. Elliptic flow is measured over a wide region in pseudorapidity, |eta| < 2.5, and over a broad range in transverse momentum, 0.5 < p_T < 20 GeV. The elliptic flow parameter v_2 is obtained by correlating individual tracks with the event plane measured using energy deposited in the forward calorimeters. As a function of transverse momentum, v_2(p_T) reaches a maximum at p_T of about 3 GeV, then decreases and becomes weakly dependent on p_T above 7 - 8 GeV. Over the measured pseudorapidity region, v_2 is found to be approximately independent of |eta| for all collision centralities and particle transverse momenta, something not observed in lower energy collisions. The results are discussed in the context of previous measurements at lower collision energies, as well as recent results from the LHC.
v2(pT) for centrality interval 0-10% and |eta| <1.
v2(pT) for centrality interval 10-20% and |eta| <1.
v2(pT) for centrality interval 20-30% and |eta| <1.
v2(pT) for centrality interval 30-40% and |eta| <1.
v2(pT) for centrality interval 40-50% and |eta| <1.
v2(pT) for centrality interval 50-60% and |eta| <1.
v2(pT) for centrality interval 60-70% and |eta| <1.
v2(pT) for centrality interval 70-80% and |eta| <1.
v2(pT) for centrality interval 0-10% and 1< |eta| <2.
v2(pT) for centrality interval 10-20% and 1< |eta| <2.
v2(pT) for centrality interval 20-30% and 1< |eta| <2.
v2(pT) for centrality interval 30-40% and 1< |eta| <2.
v2(pT) for centrality interval 40-50% and 1< |eta| <2.
v2(pT) for centrality interval 50-60% and 1< |eta| <2.
v2(pT) for centrality interval 60-70% and 1< |eta| <2.
v2(pT) for centrality interval 70-80% and 1< |eta| <2.
v2(pT) for centrality interval 0-10% and 2< |eta| <2.5.
v2(pT) for centrality interval 10-20% and 2< |eta| <2.5.
v2(pT) for centrality interval 20-30% and 2< |eta| <2.5.
v2(pT) for centrality interval 30-40% and 2< |eta| <2.5.
v2(pT) for centrality interval 40-50% and 2< |eta| <2.5.
v2(pT) for centrality interval 50-60% and 2< |eta| <2.5.
v2(pT) for centrality interval 60-70% and 2< |eta| <2.5.
v2(pT) for centrality interval 70-80% and 2< |eta| <2.5.
v2(eta) for centrality interval 0-10% and 0.5< pT <0.7 GeV.
v2(eta) for centrality interval 10-20% and 0.5< pT <0.7 GeV.
v2(eta) for centrality interval 20-30% and 0.5< pT <0.7 GeV.
v2(eta) for centrality interval 30-40% and 0.5< pT <0.7 GeV.
v2(eta) for centrality interval 40-50% and 0.5< pT <0.7 GeV.
v2(eta) for centrality interval 50-60% and 0.5< pT <0.7 GeV.
v2(eta) for centrality interval 60-70% and 0.5< pT <0.7 GeV.
v2(eta) for centrality interval 70-80% and 0.5< pT <0.7 GeV.
v2(eta) for centrality interval 0-10% and 0.8< pT <1.2 GeV.
v2(eta) for centrality interval 10-20% and 0.8< pT <1.2 GeV.
v2(eta) for centrality interval 20-30% and 0.8< pT <1.2 GeV.
v2(eta) for centrality interval 30-40% and 0.8< pT <1.2 GeV.
v2(eta) for centrality interval 40-50% and 0.8< pT <1.2 GeV.
v2(eta) for centrality interval 50-60% and 0.8< pT <1.2 GeV.
v2(eta) for centrality interval 60-70% and 0.8< pT <1.2 GeV.
v2(eta) for centrality interval 70-80% and 0.8< pT <1.2 GeV.
v2(eta) for centrality interval 0-10% and 2< pT <4 GeV.
v2(eta) for centrality interval 10-20% and 2< pT <4 GeV.
v2(eta) for centrality interval 20-30% and 2< pT <4 GeV.
v2(eta) for centrality interval 30-40% and 2< pT <4 GeV.
v2(eta) for centrality interval 40-50% and 2< pT <4 GeV.
v2(eta) for centrality interval 50-60% and 2< pT <4 GeV.
v2(eta) for centrality interval 60-70% and 2< pT <4 GeV.
v2(eta) for centrality interval 70-80% and 2< pT <4 GeV.
v2(eta) for centrality interval 0-10% and 4< pT <7 GeV.
v2(eta) for centrality interval 10-20% and 4< pT <7 GeV.
v2(eta) for centrality interval 20-30% and 4< pT <7 GeV.
v2(eta) for centrality interval 30-40% and 4< pT <7 GeV.
v2(eta) for centrality interval 40-50% and 4< pT <7 GeV.
v2(eta) for centrality interval 50-60% and 4< pT <7 GeV.
v2(eta) for centrality interval 60-70% and 4< pT <7 GeV.
v2(eta) for centrality interval 70-80% and 4< pT <7 GeV.
v2(eta) for centrality interval 0-10% and 9< pT <20 GeV.
v2(eta) for centrality interval 10-20% and 9< pT <20 GeV.
v2(eta) for centrality interval 20-30% and 9< pT <20 GeV.
v2(eta) for centrality interval 30-40% and 9< pT <20 GeV.
v2(eta) for centrality interval 40-50% and 9< pT <20 GeV.
v2(eta) for centrality interval 50-60% and 9< pT <20 GeV.
v2(eta) for centrality interval 60-70% and 9< pT <20 GeV.
v2(eta) for centrality interval 70-80% and 9< pT <20 GeV.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But sometimes you may wish to be more specific. Here we show you how.
Guidance on the query string syntax can also be found in the OpenSearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.