Showing 10 of 6617 results
A search for pair production of third-generation scalar leptoquarks decaying into a top quark and a $\tau$-lepton is presented. The search is based on a dataset of $pp$ collisions at $\sqrt{s}=13$ TeV recorded with the ATLAS detector during Run 2 of the Large Hadron Collider, corresponding to an integrated luminosity of 139 fb$^{-1}$. Events are selected if they have one light lepton (electron or muon) and at least one hadronically decaying $\tau$-lepton, or at least two light leptons. In addition, two or more jets, at least one of which must be identified as containing $b$-hadrons, are required. Six final states, defined by the multiplicity and flavour of lepton candidates, are considered in the analysis. Each of them is split into multiple event categories to simultaneously search for the signal and constrain several leading backgrounds. The signal-rich event categories require at least one hadronically decaying $\tau$-lepton candidate and exploit the presence of energetic final-state objects, which is characteristic of signal events. No significant excess above the Standard Model expectation is observed in any of the considered event categories, and 95% CL upper limits are set on the production cross section as a function of the leptoquark mass, for different assumptions about the branching fractions into $t\tau$ and $b\nu$. Scalar leptoquarks decaying exclusively into $t\tau$ are excluded up to masses of 1.43 TeV while, for a branching fraction of 50% into $t\tau$, the lower mass limit is 1.22 TeV.
Selection efficiency times acceptance summed over the seven signal regions as a function of $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$, assuming B = 1.
Selection efficiency times acceptance summed over the seven signal regions as a function of $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$, assuming B = 1.
Summary of the observed and expected 95% CL upper limits on the cross section for $\mathrm{LQ}_{3}^{\mathrm{d}}$ pair production as a function of $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$ under the assumptions of B=1.
Summary of the observed and expected 95% CL upper limits on the cross section for $\mathrm{LQ}_{3}^{\mathrm{d}}$ pair production as a function of $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$ under the assumptions of B=1.
Summary of the observed and expected 95% CL upper limits on B as a function of $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$.
Summary of the observed and expected 95% CL upper limits on B as a function of $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$.
Cutflow of the preselection requirements (see Section 5) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.
Cutflow of the preselection requirements (see Section 5) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.
Cutflow of the signal region requirements in 1$\ell+\geq 1\tau$ channel (see Table 3) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. Events that satisfy the preselection requirements are considered. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.
Cutflow of the signal region requirements in 1$\ell+\geq 1\tau$ channel (see Table 3) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. Events that satisfy the preselection requirements are considered. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.
Cutflow of the signal region requirements in the 2$\ell$OS+$\geq 1\tau$ channel (see Table 4) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. Events that satisfy the preselection requirements are considered. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.
Cutflow of the signal region requirements in the 2$\ell$OS+$\geq 1\tau$ channel (see Table 4) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. Events that satisfy the preselection requirements are considered. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.
Cutflow of the signal region requirements in the $2\ell$SS/$3\ell+\geq 1\tau$ channel (see Table 5) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. Events that satisfy the preselection requirements are considered. In this channel, two signal regions (SR-L and SR-H) are defined based on $p_{\mathrm{T}, 1}^{\tau}$, with SR-L and SR-H requiring $125< p_{\mathrm{T}, 1}^{\tau} < 225$ GeV and $p_{\mathrm{T}, 1}^{\tau}>225$ GeV, respectively. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.
Cutflow of the signal region requirements in the $2\ell$SS/$3\ell+\geq 1\tau$ channel (see Table 5) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. Events that satisfy the preselection requirements are considered. In this channel, two signal regions (SR-L and SR-H) are defined based on $p_{\mathrm{T}, 1}^{\tau}$, with SR-L and SR-H requiring $125< p_{\mathrm{T}, 1}^{\tau} < 225$ GeV and $p_{\mathrm{T}, 1}^{\tau}>225$ GeV, respectively. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.
Two-particle long-range azimuthal correlations are measured in photonuclear collisions using 1.7 nb$^{-1}$ of 5.02 TeV Pb+Pb collision data collected by the ATLAS experiment at the LHC. Candidate events are selected using a dedicated high-multiplicity photonuclear event trigger, a combination of information from the zero-degree calorimeters and forward calorimeters, and from pseudorapidity gaps constructed using calorimeter energy clusters and charged-particle tracks. Distributions of event properties are compared between data and Monte Carlo simulations of photonuclear processes. Two-particle correlation functions are formed using charged-particle tracks in the selected events, and a template-fitting method is employed to subtract the non-flow contribution to the correlation. Significant nonzero values of the second- and third-order flow coefficients are observed and presented as a function of charged-particle multiplicity and transverse momentum. The results are compared with flow coefficients obtained in proton-proton and proton-lead collisions in similar multiplicity ranges, and with theoretical expectations. The unique initial conditions present in this measurement provide a new way to probe the origin of the collective signatures previously observed only in hadronic collisions.
The measured $v_2$ and $v_3$ charged-particle anisotropies as a function of charged-particle multiplicity in photonuclear collisions
The measured $v_2$ and $v_3$ charged-particle anisotropies as a function of charged-particle transverse momentum in photonuclear collisions
The physics goal of the strong interaction program of the NA61/SHINE experiment at the CERN Super Proton Synchrotron (SPS) is to study the phase diagram of hadronic matter by a scan of particle production in collisions of nuclei with various sizes at a set of energies covering the SPS energy range. This paper presents differential inclusive spectra of transverse momentum, transverse mass and rapidity of $\pi^{-}$ mesons produced in $central$ ${}^{40}$Ar+${}^{45}$Sc collisions at beam momenta of 13$A$, 19$A$, 30$A$, 40$A$, 75$A$ and 150$A$ GeV/$c$. Energy and system size dependence of parameters of these distributions -- mean transverse mass, the inverse slope parameter of transverse mass spectra, width of the rapidity distribution and mean multiplicity -- are presented and discussed. Furthermore, the dependence of the ratio of the mean number of produced pions to the mean number of wounded nucleons on the collision energy was derived. The results are compared to predictions of several models.
Uncorrected double-differential spectra n[h−]raw/dy/dpT of negatively charged hadrons produced in the 5% Ar+Sc collisions with the smallest EPSD energy at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Uncorrected double-differential spectra n[h−]raw/dy/dpT of negatively charged hadrons produced in the 5% Ar+Sc collisions with the smallest EPSD energy at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Uncorrected double-differential spectra n[h−]raw/dy/dpT of negatively charged hadrons produced in the 5% Ar+Sc collisions with the smallest EPSD energy at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Uncorrected double-differential spectra n[h−]raw/dy/dpT of negatively charged hadrons produced in the 5% Ar+Sc collisions with the smallest EPSD energy at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Uncorrected double-differential spectra n[h−]raw/dy/dpT of negatively charged hadrons produced in the 5% Ar+Sc collisions with the smallest EPSD energy at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Uncorrected double-differential spectra n[h−]raw/dy/dpT of negatively charged hadrons produced in the 5% Ar+Sc collisions with the smallest EPSD energy at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Uncorrected double-differential spectra n[h−]raw/dy/dpT of negatively charged hadrons produced in the 5% Ar+Sc collisions with the smallest EPSD energy at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Uncorrected double-differential spectra n[h−]raw/dy/dpT of negatively charged hadrons produced in the 5% Ar+Sc collisions with the smallest EPSD energy at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Uncorrected double-differential spectra n[h−]raw/dy/dpT of negatively charged hadrons produced in the 5% Ar+Sc collisions with the smallest EPSD energy at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Uncorrected double-differential spectra n[h−]raw/dy/dpT of negatively charged hadrons produced in the 5% Ar+Sc collisions with the smallest EPSD energy at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Uncorrected double-differential spectra n[h−]raw/dy/dpT of negatively charged hadrons produced in the 5% Ar+Sc collisions with the smallest EPSD energy at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Uncorrected double-differential spectra n[h−]raw/dy/dpT of negatively charged hadrons produced in the 5% Ar+Sc collisions with the smallest EPSD energy at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Corrected double-differential spectra d2n/dydpT of negatively charged pions produced in the 5% most central Ar+Sc collisions at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Corrected double-differential spectra d2n/dydpT of negatively charged pions produced in the 5% most central Ar+Sc collisions at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Corrected double-differential spectra d2n/dydpT of negatively charged pions produced in the 5% most central Ar+Sc collisions at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Corrected double-differential spectra d2n/dydpT of negatively charged pions produced in the 5% most central Ar+Sc collisions at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Corrected double-differential spectra d2n/dydpT of negatively charged pions produced in the 5% most central Ar+Sc collisions at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Corrected double-differential spectra d2n/dydpT of negatively charged pions produced in the 5% most central Ar+Sc collisions at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Corrected double-differential spectra d2n/dydpT of negatively charged pions produced in the 5% most central Ar+Sc collisions at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Corrected double-differential spectra d2n/dydpT of negatively charged pions produced in the 5% most central Ar+Sc collisions at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Corrected double-differential spectra d2n/dydpT of negatively charged pions produced in the 5% most central Ar+Sc collisions at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Corrected double-differential spectra d2n/dydpT of negatively charged pions produced in the 5% most central Ar+Sc collisions at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Corrected double-differential spectra d2n/dydpT of negatively charged pions produced in the 5% most central Ar+Sc collisions at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Corrected double-differential spectra d2n/dydpT of negatively charged pions produced in the 5% most central Ar+Sc collisions at beam momenta of 13A, 19A, 30A, 40A, 75A and 150A GeV/c
Transverse momentum distributions dn/dpT at mid-rapidity for all six beam momenta.
Transverse momentum distributions dn/dpT at mid-rapidity for all six beam momenta.
Transverse momentum distributions dn/dpT at mid-rapidity for all six beam momenta.
Transverse momentum distributions dn/dpT at mid-rapidity for all six beam momenta.
Transverse momentum distributions dn/dpT at mid-rapidity for all six beam momenta.
Transverse momentum distributions dn/dpT at mid-rapidity for all six beam momenta.
Transverse momentum distributions dn/dpT at mid-rapidity for all six beam momenta.
Transverse momentum distributions dn/dpT at mid-rapidity for all six beam momenta.
Transverse momentum distributions dn/dpT at mid-rapidity for all six beam momenta.
Transverse momentum distributions dn/dpT at mid-rapidity for all six beam momenta.
Transverse momentum distributions dn/dpT at mid-rapidity for all six beam momenta.
Transverse momentum distributions dn/dpT at mid-rapidity for all six beam momenta.
Rapidity distributions dn/dy for all six beam momenta obtained by pT integration.
Rapidity distributions dn/dy for all six beam momenta obtained by pT integration.
Rapidity distributions dn/dy for all six beam momenta obtained by pT integration.
Rapidity distributions dn/dy for all six beam momenta obtained by pT integration.
Rapidity distributions dn/dy for all six beam momenta obtained by pT integration.
Rapidity distributions dn/dy for all six beam momenta obtained by pT integration.
Rapidity distributions dn/dy for all six beam momenta obtained by pT integration.
Rapidity distributions dn/dy for all six beam momenta obtained by pT integration.
Rapidity distributions dn/dy for all six beam momenta obtained by pT integration.
Rapidity distributions dn/dy for all six beam momenta obtained by pT integration.
Rapidity distributions dn/dy for all six beam momenta obtained by pT integration.
Rapidity distributions dn/dy for all six beam momenta obtained by pT integration.
Transverse mass spectra at mid-rapidity(0 < y < 0.2).
Transverse mass spectra at mid-rapidity(0 < y < 0.2).
Transverse mass spectra at mid-rapidity(0 < y < 0.2).
Transverse mass spectra at mid-rapidity(0 < y < 0.2).
Transverse mass spectra at mid-rapidity(0 < y < 0.2).
Transverse mass spectra at mid-rapidity(0 < y < 0.2).
Transverse mass spectra at mid-rapidity(0 < y < 0.2).
Transverse mass spectra at mid-rapidity(0 < y < 0.2).
Transverse mass spectra at mid-rapidity(0 < y < 0.2).
Transverse mass spectra at mid-rapidity(0 < y < 0.2).
Transverse mass spectra at mid-rapidity(0 < y < 0.2).
Transverse mass spectra at mid-rapidity(0 < y < 0.2).
The inverse slope parameter T of the transverse mass spectra as a function of rapidity divided by the beam rapidity.
The inverse slope parameter T of the transverse mass spectra as a function of rapidity divided by the beam rapidity.
The inverse slope parameter T of the transverse mass spectra as a function of rapidity divided by the beam rapidity.
The inverse slope parameter T of the transverse mass spectra as a function of rapidity divided by the beam rapidity.
The inverse slope parameter T of the transverse mass spectra as a function of rapidity divided by the beam rapidity.
The inverse slope parameter T of the transverse mass spectra as a function of rapidity divided by the beam rapidity.
The inverse slope parameter T of the transverse mass spectra as a function of rapidity divided by the beam rapidity.
The inverse slope parameter T of the transverse mass spectra as a function of rapidity divided by the beam rapidity.
The inverse slope parameter T of the transverse mass spectra as a function of rapidity divided by the beam rapidity.
The inverse slope parameter T of the transverse mass spectra as a function of rapidity divided by the beam rapidity.
The inverse slope parameter T of the transverse mass spectra as a function of rapidity divided by the beam rapidity.
The inverse slope parameter T of the transverse mass spectra as a function of rapidity divided by the beam rapidity.
Average transverse mass <mT> − mπ at mid-rapidity(0 < y < 0.2) versus the collision energy.
Average transverse mass <mT> − mπ at mid-rapidity(0 < y < 0.2) versus the collision energy.
The speed of sound as a function of beam energy as extracted from the data.
The speed of sound as a function of beam energy as extracted from the data.
The speed of sound as a function of beam energy as extracted from the data.
The speed of sound as a function of beam energy as extracted from the data.
Modifications to the distribution of charged particles with respect to high transverse momentum ($p_\mathrm{T}$) jets passing through a quark-gluon plasma are explored using the CMS detector. Back-to-back dijets are analyzed in lead-lead and proton-proton collisions at $\sqrt{s_\mathrm{NN}} =$ 5.02 TeV via correlations of charged particles in bins of relative pseudorapidity and angular distance from the leading and subleading jet axes. In comparing the lead-lead and proton-proton collision results, modifications to the charged-particle relative distance distribution and to the momentum distributions around the jet axis are found to depend on the dijet momentum balance $x_j$, which is the ratio between the subleading and leading jet $p_\mathrm{T}$. For events with $x_j$$\approx$ 1, these modifications are observed for both the leading and subleading jets. However, while subleading jets show significant modifications for events with a larger dijet momentum imbalance, much smaller modifications are found for the leading jets in these events.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV. The PbPb results are shown for different centrality regions.
The ratio between leading jet radial momentum profiles in PbPb and pp collisions as a function of $\Delta r$.
The ratio between subleading jet radial momentum profiles in PbPb and pp collisions as a function of $\Delta r$.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Ratios of leading jet shapes between PbPb and pp collisions. The results from 0-10 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratios of leading jet shapes between PbPb and pp collisions. The results from 10-30 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratios of leading jet shapes between PbPb and pp collisions. The results from 30-50 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratios of leading jet shapes between PbPb and pp collisions. The results from 50-90 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Ratios of subleading jet shapes between PbPb and pp collisions. The results from 0-10 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratios of subleading jet shapes between PbPb and pp collisions. The results from 10-30 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratios of subleading jet shapes between PbPb and pp collisions. The results from 30-50 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratios of subleading jet shapes between PbPb and pp collisions. The results from 50-90 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratio between unbalanced selection of leading jet shapes to all leading jet shapes in pp and PbPb collisions. The PbPb results are shown for different centrality regions.
Ratio between balanced selection of leading jet shapes to all leading jet shapes in pp and PbPb collisions. The PbPb results are shown for different centrality regions.
Ratio between unbalanced selection of subleading jet shapes to all subleading jet shapes in pp and PbPb collisions. The PbPb results are shown for different centrality regions.
Ratio between balanced selection of subleading jet shapes to all subleading jet shapes in pp and PbPb collisions. The PbPb results are shown for different centrality regions.
Generator-level vs. reconstructed $x_{j}$ values in the analysis $x_{j}$ bins. The plots show the probability to find a generator level $x_{j}$ for a given reconstructed $x_{j}$.
Generator-level vs. reconstructed $x_{j}$ values in the analysis $x_{j}$ bins. The plots show the probability to find a reconstructed $x_{j}$ for a given generator level $x_{j}$.
The coherent photoproduction of $\rm{J/\psi}$ and $\rm{\psi'}$ mesons was measured in ultra-peripheral Pb-Pb collisions at a center-of-mass energy $\sqrt{s_{\mathrm{NN}}}~=~5.02$ TeV with the ALICE detector. Charmonia are detected in the central rapidity region for events where the hadronic interactions are strongly suppressed. The $\rm{J/\psi}$ is reconstructed using the dilepton ($l^{+} l^{-}$) and proton-antiproton decay channels, while for the $\rm{\psi'}$, the dilepton and the $l^{+} l^{-} \pi^{+} \pi^{-}$ decay channels are studied. The analysis is based on an event sample corresponding to an integrated luminosity of about 233 ${\mu b}^{-1}$. The results are compared with theoretical models for coherent $\rm{J/\psi}$ and $\rm{\psi'}$ photoproduction. The coherent cross section is found to be in a good agreement with models incorporating moderate nuclear gluon shadowing of about 0.65 at a Bjorken-$x$ of around $6\times 10^{-4}$, such as the EPS09 parametrization, however none of the models is able to fully describe the rapidity dependence of the coherent $\rm{J/\psi}$ cross section including ALICE measurements at forward rapidity. The ratio of $\rm{\psi'}$ to $\rm{J/\psi}$ coherent photoproduction cross sections was also measured and found to be consistent with the one for photoproduction off protons.
Measured differential cross section of coherent J/Psi photoproduction in Pb–Pb UPCs in |y|<0.8. The points show the measurements for different decay channels.
Measured differential cross section of coherent Psi(2S) photoproduction in Pb–Pb UPCs in |y|<0.8. The points show the measurements for different decay channels.
Measured rapidity differential cross section of coherent J/Psi photoproduction in Pb–Pb UPCs events.
Measured rapidity differential cross section of coherent Psi(2S) photoproduction in Pb–Pb UPCs events.
The results of a search for gluino and squark pair production with the pairs decaying via the lightest charginos into a final state consisting of two $W$ bosons, the lightest neutralinos ($\tilde\chi^0_1$), and quarks, are presented. The signal is characterised by the presence of a single charged lepton ($e^{\pm}$ or $\mu^{\pm}$) from a $W$ boson decay, jets, and missing transverse momentum. The analysis is performed using 139 fb$^{-1}$ of proton-proton collision data taken at a centre-of-mass energy $\sqrt{s}=13$ TeV delivered by the Large Hadron Collider and recorded by the ATLAS experiment. No statistically significant excess of events above the Standard Model expectation is found. Limits are set on the direct production of squarks and gluinos in simplified models. Masses of gluino (squark) up to 2.2 TeV (1.4 TeV) are excluded at 95% confidence level for a light $\tilde\chi^0_1$.
Post-fit $m_{T}$ distribution in the SR 2J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Pre-fit $m_{eff}$ distribution in the TR6J control region. Uncertainties include statistical and systematic uncertainties (added in quadrature). The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Pre-fit $m_{eff}$ distribution in the WR6J control region. Uncertainties include statistical and systematic uncertainties (added in quadrature). The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the TR6J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the WR6J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step x = 1/2 model.
Post-fit $m_{eff}$ distribution in the 4J high-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Expected 95% CL exclusion contours for the gluino one-step x = 1/2 model. space.
Post-fit $m_{eff}$ distribution in the 6J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step variable-x
Post-fit $m_{eff}$ distribution in the 6J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Expected 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for the gluino one-step x = 1/2 model.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the gluino one-step x = 1/2 model. space.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Observed 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-step variable-x
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Expected 95% CL exclusion contours for the squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step x = 1/2
Expected 95% CL exclusion contours for the squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step variable-x
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Upper limits on the signal cross section for simplified model squark one-step x = 1/2
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Upper limits on the signal cross section for simplified model squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step x = 1/2
Upper limits on the signal cross section for simplified model squark one-step x=1/2 in one-flavour schemes
Upper limits on the signal cross section for simplified model gluino one-step variable-x
Upper limits on the signal cross section for simplified model squark one-step variable-x in one-flavour schemes
Upper limits on the signal cross section for simplified model squark one-step x = 1/2
Post-fit $m_{eff}$ distribution in the 2J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step variable-x
Post-fit $m_{eff}$ distribution in the 2J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step x=1/2 in one-flavour schemes
Post-fit $m_{eff}$ distribution in the 4J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step variable-x in one-flavour schemes
Post-fit $m_{eff}$ distribution in the 4J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the TR2J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-tag validation region. Uncertainties include statistical and systematic uncertainties.
Post-fit $m_{eff}$ distribution in the WR2J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-veto validation region. Uncertainties include statistical and systematic uncertainties.
Post-fit $m_{eff}$ distribution in the TR4J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR2JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the WR4J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR2JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 2J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR4JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 2J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR4JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 4J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR6JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 4J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR6JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 6J b-tag validation region. Uncertainties include statistical and systematic uncertainties.
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Post-fit $m_{eff}$ distribution in the 6J b-veto validation region. Uncertainties include statistical and systematic uncertainties.
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR2JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR2JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR4JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR4JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR6JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J discovery high region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR6JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J discovery high region for squark production one-step variable-x simplified models
Signal efficiency in SR2J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J discovery low region for squark production one-step variable-x simplified models
Signal efficiency in SR2J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Global polarization of $\Xi$ and $\Omega$ hyperons has been measured for the first time in Au+Au collisions at $\sqrt{s_{_{NN}}}$ = 200 GeV. The measurements of the $\Xi^-$ and $\bar{\Xi}^+$ hyperon polarization have been performed by two independent methods, via analysis of the angular distribution of the daughter particles in the parity violating weak decay $\Xi\rightarrow\Lambda+\pi$, as well as by measuring the polarization of the daughter $\Lambda$-hyperon, polarized via polarization transfer from its parent. The polarization, obtained by combining the results from the two methods and averaged over $\Xi^-$ and $\bar{\Xi}^+$, is measured to be $\langle P_\Xi \rangle = 0.47\pm0.10~({\rm stat.})\pm0.23~({\rm syst.})\,\%$ for the collision centrality 20%-80%. The $\langle P_\Xi \rangle$ is found to be slightly larger than the inclusive $\Lambda$ polarization and in reasonable agreement with a multi-phase transport model (AMPT). The $\langle P_\Xi \rangle$ is found to follow the centrality dependence of the vorticity predicted in the model, increasing toward more peripheral collisions. The global polarization of $\Omega$, $\langle P_\Omega \rangle = 1.11\pm0.87~({\rm stat.})\pm1.97~({\rm syst.})\,\%$ was obtained by measuring the polarization of daughter $\Lambda$ in the decay $\Omega \rightarrow \Lambda + K$, assuming the polarization transfer factor $C_{\Omega\Lambda}=1$.
$\Xi$ and $\Omega$ global polarization in Au+Au collisions at 200 GeV. Decay parameter from PDG2020, $\alpha_{\Xi}$=-$\alpha_{\bar{\Xi}}$=-0.401, is used.
The energy dependence of $\Lambda$ and $\bar{\Lambda}$ global polarization. Note that the results from previous measurements are rescaled using updated decay parameters (PDG2020), $\alpha_{\Lambda}$=0.732 and $\alpha_{\bar{\Lambda}}$=-0.758. The original data can be found in <a href="https://www.hepdata.net/record/ins1510474">this page</a>.
Centrality dependence of $\Xi$ global poalrization in Au+Au collisions at 200 GeV. Decay parameter from PDG2020, $\alpha_{\Xi}$=-$\alpha_{\bar{\Xi}}$=-0.401, is used.
Centrality dependence of $\Lambda$ global polarization in Au+Au collisions at 200 GeV. Note that the results from previous measurement are rescaled using updated decay parameters (PDG2020), $\alpha_{\Lambda}$=0.732. The original data can be found in <a href="https://www.hepdata.net/record/ins1672785">this page</a>.
We present an angular analysis of the $B^{+}\rightarrow K^{\ast+}(\rightarrow K_{S}^{0}\pi^{+})\mu^{+}\mu^{-}$ decay using 9$\,\mbox{fb}^{-1}$ of $pp$ collision data collected with the LHCb experiment. For the first time, the full set of CP-averaged angular observables is measured in intervals of the dimuon invariant mass squared. Local deviations from Standard Model predictions are observed, similar to those in previous LHCb analyses of the isospin-partner $B^{0}\rightarrow K^{\ast0}\mu^{+}\mu^{-}$ decay. The global tension is dependent on which effective couplings are considered and on the choice of theory nuisance parameters.
Results for the CP-averaged observables Fl, Afb and S3–S9. The first uncertainties are statistical and the second systematic.
Results for the optimised observables FL and P1–P'8. The first uncertainties are statistical and the second systematic.
The CP-averaged observable Fl versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The CP-averaged observable S3 versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The CP-averaged observable S4 versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The CP-averaged observable S5 versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The CP-averaged observable Afb versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The CP-averaged observable S7 versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The CP-averaged observable S8 versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The CP-averaged observable S9 versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The optimised observable Fl versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The optimised observable P1 versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The optimised observable P2 versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The optimised observable P3 versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The optimised observable P4' versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The optimised observable P5' versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The optimised observable P6' versus q2. The first (second) error bars represent the statistical (total) uncertainties.
The optimised observable P8' versus q2. The first (second) error bars represent the statistical (total) uncertainties.
Correlation matrix for the CP-averaged observables FL, AFB and S3–S9 from the maximum-likelihood fit in the interval 0.10 < q2 < 0.98 GeV2/c4
Correlation matrix for the CP-averaged observables FL, AFB and S3–S9 from the maximum-likelihood fit in the interval 1.10 < q2 < 2.50 GeV2/c4
Correlation matrix for the CP-averaged observables FL, AFB and S3–S9 from the maximum-likelihood fit in the interval 2.50 < q2 < 4.00 GeV2/c4
Correlation matrix for the CP-averaged observables FL, AFB and S3–S9 from the maximum-likelihood fit in the interval 4.00 < q2 < 6.00 GeV2/c4
Correlation matrix for the CP-averaged observables FL, AFB and S3–S9 from the maximum-likelihood fit in the interval 6.00 < q2 < 8.00 GeV2/c4
Correlation matrix for the CP-averaged observables FL, AFB and S3–S9 from the maximum-likelihood fit in the interval 11.00 < q2 < 12.50 GeV2/c4
Correlation matrix for the CP-averaged observables FL, AFB and S3–S9 from the maximum-likelihood fit in the interval 15.00 < q2 < 17.00 GeV2/c4
Correlation matrix for the CP-averaged observables FL, AFB and S3–S9 from the maximum-likelihood fit in the interval 17.00 < q2 < 19.00 GeV2/c4
Correlation matrix for the CP-averaged observables FL, AFB and S3–S9 from the maximum-likelihood fit in the interval 1.10 < q2 < 6.00 GeV2/c4
Correlation matrix for the CP-averaged observables FL, AFB and S3–S9 from the maximum-likelihood fit in the interval 15.00 < q2 < 19.00 GeV2/c4
Correlation matrix for the optimised observables FL and P1–P'8 from the maximum-likelihood fit in the interval 0.10 < q2 < 0.98 GeV2/c4
Correlation matrix for the optimised observables FL and P1–P'8 from the maximum-likelihood fit in the interval 1.10 < q2 < 2.50 GeV2/c4
Correlation matrix for the optimised observables FL and P1–P'8 from the maximum-likelihood fit in the interval 2.50 < q2 < 4.00 GeV2/c4
Correlation matrix for the optimised observables FL and P1–P'8 from the maximum-likelihood fit in the interval 4.00 < q2 < 6.00 GeV2/c4
Correlation matrix for the optimised observables FL and P1–P'8 from the maximum-likelihood fit in the interval 6.00 < q2 < 8.00 GeV2/c4
Correlation matrix for the optimised observables FL and P1–P'8 from the maximum-likelihood fit in the interval 11.00 < q2 < 12.50 GeV2/c4
Correlation matrix for the optimised observables FL and P1–P'8 from the maximum-likelihood fit in the interval 15.00 < q2 < 17.00 GeV2/c4
Correlation matrix for the optimised observables FL and P1–P'8 from the maximum-likelihood fit in the interval 17.00 < q2 < 19.00 GeV2/c4
Correlation matrix for the optimised observables FL and P1–P'8 from the maximum-likelihood fit in the interval 1.10 < q2 < 6.00 GeV2/c4
Correlation matrix for the optimised observables FL and P1–P'8 from the maximum-likelihood fit in the interval 15.00 < q2 < 19.00 GeV2/c4
Measurements of the total and differential fiducial cross sections for the Z boson decaying into two neutrinos are presented at the LHC in proton-proton collisions at a center-of-mass energy of 13 TeV. The data were collected by the CMS detector in 2016 and correspond to an integrated luminosity of 35.9 fb$^{-1}$. In these measurements, events are selected containing an imbalance in transverse momentum and one or more energetic jets. The fiducial differential cross section is measured as a function of the Z boson transverse momentum. The results are combined with a previous measurement of charged-lepton decays of the Z boson.
The measured and predicted inclusive fiducial cross sections in fb. The experimental measurement includes both statistical and systematics uncertainties. The theoretical prediction includes both the QCD scale and PDF uncertainties.
The measured and predicted inclusive fiducial cross sections in fb. The experimental measurement includes both statistical and systematics uncertainties. The theoretical prediction includes both the QCD scale and PDF uncertainties.
Experimental uncertainties affecting transfer factors in the analysis that is used to estimate the W background in the signal region (SR). The number of W boson events are denoted as $W_{SR}$ for the SR and in analogy as $W_{\mu\nu}$ ($W_{e\nu}$) for the single-muon (single-electron) control region (CR).
Experimental uncertainties affecting transfer factors in the analysis that is used to estimate the W background in the signal region (SR). The number of W boson events are denoted as $W_{SR}$ for the SR and in analogy as $W_{\mu\nu}$ ($W_{e\nu}$) for the single-muon (single-electron) control region (CR).
Uncertainties assigned to the simulation based processes in SR and CRs.
Uncertainties assigned to the simulation based processes in SR and CRs.
Cross sections (fb) at large Z $p_{T}$ values in the Z -> $\ell\ell$ and Z -> $\nu\nu$ channels, and their combination. The theoretical predictions from Madgraph at NLO in QCD and corrected to NLO in electroweak using the NNPDF 3.0 are also reported. With the exception of the largest Z $p_{T}$ bin, the statistical uncertainties in the measurements are much smaller than the systematic uncertainties. Both measurements and predictions correspond to $\sigma \mathcal{B}(Z -> \ell\ell)$, where $\sigma$ is the total fiducial cross section, $\mathcal{B}$ is the branching fraction, and $\ell$ is a charged lepton. The $Z -> \nu\nu$ measurement corresponds to $\sigma \mathcal{B}(Z -> \ell\ell)/\mathcal{B}(Z -> \nu\nu)$.
Cross sections (fb) at large Z $p_{T}$ values in the Z -> $\ell\ell$ and Z -> $\nu\nu$ channels, and their combination. The theoretical predictions from Madgraph at NLO in QCD and corrected to NLO in electroweak using the NNPDF 3.0 are also reported. With the exception of the largest Z $p_{T}$ bin, the statistical uncertainties in the measurements are much smaller than the systematic uncertainties. Both measurements and predictions correspond to $\sigma \mathcal{B}(Z -> \ell\ell)$, where $\sigma$ is the total fiducial cross section, $\mathcal{B}$ is the branching fraction, and $\ell$ is a charged lepton. The $Z -> \nu\nu$ measurement corresponds to $\sigma \mathcal{B}(Z -> \ell\ell)/\mathcal{B}(Z -> \nu\nu)$.
Cross sections normalized to the total cross section measurements at high Z $p_{T}$ values in the Z -> $\ell\ell$ and Z -> $\nu\nu$ channels, and in their combination. The uncertainty includes both statistical and systematic uncertainties.
Cross sections normalized to the total cross section measurements at high Z $p_{T}$ values in the Z -> $\ell\ell$ and Z -> $\nu\nu$ channels, and in their combination. The uncertainty includes both statistical and systematic uncertainties.
The relative statistical and systematic uncertainties from various sources for the absolute cross section measurements in bins of Z $p_{T}$ on charged leptons.
The relative statistical and systematic uncertainties from various sources for the absolute cross section measurements in bins of Z $p_{T}$ on charged leptons.
The relative statistical and systematic uncertainties from various sources for the relative cross section measurements in bins of Z $p_{T}$ on charged leptons.
The relative statistical and systematic uncertainties from various sources for the relative cross section measurements in bins of Z $p_{T}$ on charged leptons.
The relative statistical and systematic uncertainties from various sources for the absolute cross section measurements in bins of Z $p_{T}$ on neutrinos.
The relative statistical and systematic uncertainties from various sources for the absolute cross section measurements in bins of Z $p_{T}$ on neutrinos.
The relative statistical and systematic uncertainties from various sources for the relative cross section measurements in bins of Z $p_{T}$ on neutrinos.
The relative statistical and systematic uncertainties from various sources for the relative cross section measurements in bins of Z $p_{T}$ on neutrinos.
The relative statistical and systematic uncertainties from various sources for the absolute cross section measurements in bins of Z $p_{T}$ on neutrinos and charged leptons.
The relative statistical and systematic uncertainties from various sources for the absolute cross section measurements in bins of Z $p_{T}$ on neutrinos and charged leptons.
The relative statistical and systematic uncertainties from various sources for the relative cross section measurements in bins of Z $p_{T}$ on neutrinos and charged leptons.
The relative statistical and systematic uncertainties from various sources for the relative cross section measurements in bins of Z $p_{T}$ on neutrinos and charged leptons.
Cross section measurements in bins of Z $p_{T}$ on neutrinos and charged leptons.
Cross section measurements in bins of Z $p_{T}$ on neutrinos and charged leptons.
A search for leptoquarks produced singly and in pairs in proton-proton collisions is presented. We consider the leptoquark (LQ) to be a scalar particle of charge -1/3$e$ coupling to a top quark plus a tau lepton ($\mathrm{t}\tau$) or a bottom quark plus a neutrino ($\mathrm{b}\nu$), or a vector particle of charge +2/3$e$, coupling to $\mathrm{t}\nu$ or $\mathrm{b}\tau$. These choices are motivated by models that can explain a series of anomalies observed in the measurement of B meson decays. In this analysis the signatures $\mathrm{t}\tau\nu\mathrm{b}$ and $\mathrm{t}\tau\nu$ are probed, using data recorded by the CMS experiment at the CERN LHC at $\sqrt{s} =$ 13 TeV and that correspond to an integrated luminosity of 137 fb$^{-1}$. These signatures have not been previously explored in a dedicated search. The data are found to be in agreement with the standard model prediction. Lower limits at 95% confidence level are set on the LQ mass in the range 0.98-1.73 TeV, depending on the LQ spin and its coupling $\lambda$ to a lepton and a quark, and assuming equal branching fractions for the two LQ decay modes considered. These are the most stringent constraints to date on the existence of leptoquarks in this scenario.
Pair leptoquark (LQ) total selection efficiency, accounting for both the decay branching fraction and the event selection, for events that pass the signal region requirements and any of the top quark or b jet categories defined in the search.
Single scalar leptoquark (LQs) total selection efficiency, accounting for both the decay branching fraction and the event selection, for events that pass the signal region requirements and any of the top quark or b jet categories defined in the search.
Single vector leptoquark (LQv) k = 0 total selection efficiency, accounting for both the decay branching fraction and the event selection, for events that pass the signal region requirements and any of the top quark or b jet categories defined in the search.
Single vector leptoquark (LQv) k = 1 total selection efficiency, accounting for both the decay branching fraction and the event selection, for events that pass the signal region requirements and any of the top quark or b jet categories defined in the search.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But, sometimes you may wish to be more specific. Here we show you how.
Guidance and examples on the query string syntax can be found in the Elasticsearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.