Showing 10 of 2088 results
A measurement of the dijet production cross section is reported based on proton-proton collision data collected in 2016 at $\sqrt{s}$ = 13 TeV by the CMS experiment at the CERN LHC, corresponding to an integrated luminosity of up to 36.3 fb$^{-1}$. Jets are reconstructed with the anti-$k_\mathrm{T}$ algorithm for distance parameters of $R$ = 0.4 and 0.8. Cross sections are measured double-differentially (2D) as a function of the largest absolute rapidity $\lvert y_\text{max}\rvert$ of the two jets with the highest transverse momenta $p_\mathrm{T}$ and their invariant mass $m_{1,2}$, and triple-differentially (3D) as a function of the rapidity separation $y^*$, the total boost $y_\mathrm{b}$, and either $m_{1,2}$ or the average $p_\mathrm{T}$ of the two jets. The cross sections are unfolded to correct for detector effects and are compared with fixed-order calculations derived at next-to-next-to-leading order in perturbative quantum chromodynamics. The impact of the measurements on the parton distribution functions and the strong coupling constant at the mass of the Z boson is investigated, yielding a value of $\alpha_\mathrm{S}$ = 0.1179 $\pm$ 0.0019.
Double-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.4 as a function of the dijet invariant mass ($m_{1,2}$) and the absolute rapidity of the outermost jet ($\left| y \right|_\text{max}$)
Electroweak corrections to double-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.4 as a function of the dijet invariant mass ($m_{1,2}$) and the absolute rapidity of the outermost jet ($\left| y \right|_\text{max}$)
Nonperturbative corrections to double-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.4 as a function of the dijet invariant mass ($m_{1,2}$) and the absolute rapidity of the outermost jet ($\left| y \right|_\text{max}$)
Statistical correlation coefficients for double-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.4 as a function of the dijet invariant mass ($m_{1,2}$) and the absolute rapidity of the outermost jet ($\left| y \right|_\text{max}$)
Double-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.8 as a function of the dijet invariant mass ($m_{1,2}$) and the absolute rapidity of the outermost jet ($\left| y \right|_\text{max}$)
Electroweak corrections to double-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.8 as a function of the dijet invariant mass ($m_{1,2}$) and the absolute rapidity of the outermost jet ($\left| y \right|_\text{max}$)
Nonperturbative corrections to double-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.8 as a function of the dijet invariant mass ($m_{1,2}$) and the absolute rapidity of the outermost jet ($\left| y \right|_\text{max}$)
Statistical correlation coefficients for double-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.8 as a function of the dijet invariant mass ($m_{1,2}$) and the absolute rapidity of the outermost jet ($\left| y \right|_\text{max}$)
Triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.4 as a function of the dijet invariant mass ($m_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Electroweak corrections to triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.4 as a function of the dijet invariant mass ($m_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Nonperturbative corrections to triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.4 as a function of the dijet invariant mass ($m_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Statistical correlation coefficients for triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.4 as a function of the dijet invariant mass ($m_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.8 as a function of the dijet invariant mass ($m_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Electroweak corrections to triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.8 as a function of the dijet invariant mass ($m_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Nonperturbative corrections to triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.8 as a function of the dijet invariant mass ($m_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Statistical correlation coefficients for triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.8 as a function of the dijet invariant mass ($m_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.4 as a function of the dijet average transverse momentum ($\langle p_\text{T} \rangle_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Electroweak corrections to triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.4 as a function of the dijet average transverse momentum ($\langle p_\text{T} \rangle_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Nonperturbative corrections to triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.4 as a function of the dijet average transverse momentum ($\langle p_\text{T} \rangle_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Statistical correlation coefficients for triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.4 as a function of the dijet average transverse momentum ($\langle p_\text{T} \rangle_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.8 as a function of the dijet average transverse momentum ($\langle p_\text{T} \rangle_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Electroweak corrections to triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.8 as a function of the dijet average transverse momentum ($\langle p_\text{T} \rangle_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Nonperturbative corrections to triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.8 as a function of the dijet average transverse momentum ($\langle p_\text{T} \rangle_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
Statistical correlation coefficients for triple-differential dijet cross section for anti-$k_\text{T}$ jets with R = 0.8 as a function of the dijet average transverse momentum ($\langle p_\text{T} \rangle_{1,2}$), the total boost of dijet system ($y_\text{b}$), and the absolute rapidity separation of the two jets ($y^*$)
The strange quark content of the proton is probed through the measurement of the production cross section for a W boson and a charm (c) quark in proton-proton collisions at a center-of-mass energy of 13 TeV. The analysis uses a data sample corresponding to a total integrated luminosity of 138 fb$^{-1}$ collected with the CMS detector at the LHC. The W bosons are identified through their leptonic decays to an electron or a muon, and a neutrino. Charm jets are tagged using the presence of a muon or a secondary vertex inside the jet. The W+c production cross section and the cross section ratio $R^\pm_\text{c}$ = $\sigma$(W$^+$+$\bar{\text{c}}$) / $\sigma$(W$^-$+$\text{c}$) are measured inclusively and differentially as functions of the transverse momentum and the pseudorapidity of the lepton originating from the W boson decay. The precision of the measurements is improved with respect to previous studies, reaching 1% in $R^\pm_\text{c}$. The precision of the measurements is improved with respect to previous studies, reaching 1% in $R^\pm_\text{c}$ = 0.950 $\pm$ 0.005 (stat) $\pm$ 0.010 (syst). The measurements are compared with theoretical predictions up to next-to-next-to-leading order in perturbative quantum chromodynamics.
Particle level efficiency*acceptance correction factors and cross section measurements for the four channels (W decay to muon or electron and charm identification via muon or secondary vertex inside a jet). The combined measurement is shown in the last row.
Parton level efficiency*acceptance correction factors and cross section measurements for the four channels (W decay to muon or electron and charm identification via muon or secondary vertex inside a jet). The combined measurement is shown in the last row.
Inclusive cross section predictions at QCD NLO accuracy from MCFM using different PDF sets
Inclusive cross section predictions up to QCD NNLO accuracy using the NNPDF3.1 PDF set
Measured production cross sections ratio $\sigma(W^+ + \overline{c})$ / $\sigma(W^- + c)$
Predictions for the cross sections ratio $\sigma(W^+ + \overline{c})$ / $\sigma(W^- + c)$ at QCD NLO accuracy from MCFM using different PDF sets
Predictions for the cross sections ratio $\sigma(W^+ + \overline{c})$ / $\sigma(W^- + c)$ up to QCD NNLO accuracy using the NNPDF3.1 PDF set
Measured diferential cross sections $\sigma(W^- + c) + \sigma(W^+ + \overline{c})$ as a function of the absolute value of the pseudorapidity of the lepton from the W decay, unfolded to the particle level.
Measured diferential cross sections as a function of the transverse momentum of the lepton from the W decay, unfolded to the particle level.
Measured diferential cross sections $\sigma(W^- + c) + \sigma(W^+ + \overline{c})$ as a function of the absolute value of the pseudorapidity of the lepton from the W decay, unfolded to the parton level.
Measured diferential cross sections as a function of the transverse momentum of the lepton from the W decay, unfolded to the parton level.
Measured diferential cross sections ratio $R=\sigma(W^+ + \overline{c}) / \sigma(W^- + c)$ as a function of the absolute value of the pseudorapidity of the lepton from the W decay.
Measured diferential cross sections ratio $R=\sigma(W^+ + \overline{c}) / \sigma(W^- + c)$ as a function of the transverse momentum of the lepton from the W decay.
The second-order ($v_2$) and third-order ($v_3$) Fourier coefficients describing the azimuthal anisotropy of prompt and nonprompt (from b-hadron decays) J/$\psi$, as well as prompt $\psi$(2S) mesons are measured in lead-lead collisions at a center-of-mass energy per nucleon pair of $\sqrt{s_\mathrm{NN}}$ = 5.02 TeV. The analysis uses a data set corresponding to an integrated luminosity of 1.61 nb$^{-1}$ recorded with the CMS detector. The J/$\psi$ and $\psi$(2S) mesons are reconstructed using their dimuon decay channel. The $v_2$ and $v_3$ coefficients are extracted using the scalar product method and studied as functions of meson transverse momentum and collision centrality. The measured $v_2$ values for prompt J/$\psi$ mesons are found to be larger than those for nonprompt J/$\psi$ mesons. The prompt J/$\psi$$v_2$ values at high $p_\mathrm{T}$ are found to be underpredicted by a model incorporating only parton energy loss effects in a quark-gluon plasma medium. Prompt and nonprompt J/$\psi$ meson $v_3$ and prompt $\psi$(2S) $v_2$ and $v_3$ values are also reported for the first time, providing new information about heavy quark interactions in the hot and dense medium created in heavy ion collisions.
The $v_{2}$ values as functions of $p_{\text{T}}$ for prompt and nonprompt J/$\psi$ mesons in the 10–60% centrality range. The results for 3 $< p_{\text{T}} <$ 6.5 and 6.5 $< p_{\text{T}} <$ 50 GeV/c are studied in the rapidity range of 1.6 $< |y| <$ 2.4 and $|y| <$ 2.4, respectively.
The $v_{2}$ values as a function of centrality for prompt and nonprompt J/$\psi$ mesons. The kinematic range is 6.5 $< p_{\text{T}} <$ 50 GeV/c and $|y| <$ 2.4.
The $v_{3}$ values as functions of $p_{\text{T}}$ for prompt and nonprompt J/$\psi$ mesons in the 10–60% centrality range. The results for 3 $< p_{\text{T}} <$ 6.5 and 6.5 $< p_{\text{T}} <$ 50 GeV/c are studied in the rapidity range of 1.6 $< |y| <$ 2.4 and $|y| <$ 2.4, respectively.
The $v_{3}$ values as a function of centrality for prompt and nonprompt J/$\psi$ mesons.The kinematic range is 6.5 $< p_{\text{T}} <$ 50 GeV/c and $|y| < 2.4$.
The $v_{2}$ values of prompt J/$\psi$ mesons as a function of $p_{\text{T}}$ in the 10–60% centrality range. The results for 3 $< p_{\text{T}} <$ 6.5 and 6.5 $< p_{\text{T}} <$ 50 GeV/c are studied in the rapidity range of 1.6 $< |y| <$ 2.4 and $|y| <$ 2.4, respectively.
The $v_{2}$ values as functions of $p_{\text{T}}$ for prompt J/$\psi$ and prompt $\psi$(2S) mesons in the 10–60% centrality range. The results for $p_{\text{T}}$ < 6.5 and $p_{\text{T}}$ > 6.5 GeV/c are studied in the rapidity range of 1.6 $< |y| <$ 2.4 and $|y| <$ 2.4, respectively.
The $v_{2}$ values as functions of centrality for prompt J/$\psi$ and prompt $\psi$(2S) mesons. The kinematic range is 6.5 $< p_{\text{T}} <$ 50 GeV/c and $|y| <$ 2.4.
The $v_{3}$ values as functions of $p_{\text{T}}$ for prompt J/$\psi$ and prompt $\psi$(2S) mesons in the 10–60% centrality range. The results for $p_{\text{T}}$ < 6.5 and $p_{\text{T}}$ > 6.5 GeV/c are studied in the rapidity range of 1.6 $< |y| <$ 2.4 and $|y| <$ 2.4, respectively.
The $v_{3}$ values as functions of centrality for prompt J/$\psi$ and prompt $\psi$(2S) mesons. The kinematic range is 6.5 $< p_{\text{T}} <$ 50 GeV/c and $|y| <$ 2.4.
Modifications to the distribution of charged particles with respect to high transverse momentum ($p_\mathrm{T}$) jets passing through a quark-gluon plasma are explored using the CMS detector. Back-to-back dijets are analyzed in lead-lead and proton-proton collisions at $\sqrt{s_\mathrm{NN}} =$ 5.02 TeV via correlations of charged particles in bins of relative pseudorapidity and angular distance from the leading and subleading jet axes. In comparing the lead-lead and proton-proton collision results, modifications to the charged-particle relative distance distribution and to the momentum distributions around the jet axis are found to depend on the dijet momentum balance $x_j$, which is the ratio between the subleading and leading jet $p_\mathrm{T}$. For events with $x_j$$\approx$ 1, these modifications are observed for both the leading and subleading jets. However, while subleading jets show significant modifications for events with a larger dijet momentum imbalance, much smaller modifications are found for the leading jets in these events.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the leading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The distribution of charged particle yields within $|\Delta\varphi| < 1.0$ correlated with the subleading jets as a function of $\Delta\eta$ in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV. The PbPb results are shown for different centrality regions.
The leading jet radial momentum profiles in pp and PbPb collisions and a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV. The PbPb results are shown for different centrality regions.
The subleading jet radial momentum profiles in pp and PbPb collisions as a function of $\Delta r$ for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV. The PbPb results are shown for different centrality regions.
The ratio between leading jet radial momentum profiles in PbPb and pp collisions as a function of $\Delta r$.
The ratio between subleading jet radial momentum profiles in PbPb and pp collisions as a function of $\Delta r$.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for leading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for leading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for leading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for leading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for leading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Ratios of leading jet shapes between PbPb and pp collisions. The results from 0-10 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratios of leading jet shapes between PbPb and pp collisions. The results from 10-30 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratios of leading jet shapes between PbPb and pp collisions. The results from 30-50 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratios of leading jet shapes between PbPb and pp collisions. The results from 50-90 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $0.7 < p_{\mathrm{T}}^{\mathrm{ch}} < 1$ GeV.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $1 < p_{\mathrm{T}}^{\mathrm{ch}} < 2$ GeV.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $2 < p_{\mathrm{T}}^{\mathrm{ch}} < 3$ GeV.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $3 < p_{\mathrm{T}}^{\mathrm{ch}} < 4$ GeV.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $4 < p_{\mathrm{T}}^{\mathrm{ch}} < 8$ GeV.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $8 < p_{\mathrm{T}}^{\mathrm{ch}} < 12$ GeV.
Jet shapes for subleading jets in the 0-10 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for subleading jets in the 10-30 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for subleading jets in the 30-50 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for subleading jets in the 50-90 % centrality bin in PbPb collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Jet shapes for subleading jets in pp collisions. The results are shown in different dijet momentum balance bins for the charged particle $p_{\mathrm{T}}$ bin $12 < p_{\mathrm{T}}^{\mathrm{ch}} < 300$ GeV.
Ratios of subleading jet shapes between PbPb and pp collisions. The results from 0-10 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratios of subleading jet shapes between PbPb and pp collisions. The results from 10-30 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratios of subleading jet shapes between PbPb and pp collisions. The results from 30-50 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratios of subleading jet shapes between PbPb and pp collisions. The results from 50-90 % centrality bin in PbPb are compared to pp using several dijet momentum balance selections.
Ratio between unbalanced selection of leading jet shapes to all leading jet shapes in pp and PbPb collisions. The PbPb results are shown for different centrality regions.
Ratio between balanced selection of leading jet shapes to all leading jet shapes in pp and PbPb collisions. The PbPb results are shown for different centrality regions.
Ratio between unbalanced selection of subleading jet shapes to all subleading jet shapes in pp and PbPb collisions. The PbPb results are shown for different centrality regions.
Ratio between balanced selection of subleading jet shapes to all subleading jet shapes in pp and PbPb collisions. The PbPb results are shown for different centrality regions.
Generator-level vs. reconstructed $x_{j}$ values in the analysis $x_{j}$ bins. The plots show the probability to find a generator level $x_{j}$ for a given reconstructed $x_{j}$.
Generator-level vs. reconstructed $x_{j}$ values in the analysis $x_{j}$ bins. The plots show the probability to find a reconstructed $x_{j}$ for a given generator level $x_{j}$.
An inclusive search for nonresonant signatures of beyond the standard model (SM) phenomena in events with three or more charged leptons, including hadronically decaying $\tau$ leptons, is presented. The analysis is based on a data sample corresponding to an integrated luminosity of 138 fb$^{-1}$ of proton-proton collisions at $\sqrt{s} =$ 13 TeV, collected by the CMS experiment at the LHC in 2016-2018. Events are categorized based on the lepton and b-tagged jet multiplicities and various kinematic variables. Three scenarios of physics beyond the SM are probed, and signal-specific boosted decision trees are used for enhancing sensitivity. No significant deviations from the background expectations are observed. Lower limits are set at 95% confidence level on the mass of type-III seesaw heavy fermions in the range 845-1065 GeV for various decay branching fraction combinations to SM leptons. Doublet and singlet vector-like $\tau$ lepton extensions of the SM are excluded for masses below 1045 GeV and in the mass range 125-150 GeV, respectively. Scalar leptoquarks decaying exclusively to a top quark and a lepton are excluded below 1.12-1.42 TeV, depending on the lepton flavor. For the type-III seesaw as well as the vector-like doublet model, these constraints are the most stringent to date. For the vector-like singlet model, these are the first constraints from the LHC experiments. Detailed results are also presented to facilitate alternative theoretical interpretations.
The minimum lepton $\mathrm{p_{T}}$ (GeV) distribution in 3L MisID CR events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction.
The $\mathrm{S_{T}}$ (GeV) distribution in 3L WZ CR events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction.
The $\mathrm{DR_{min}}$ distribution in 3L Z$\mathrm{\gamma}$ CR events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction.
The distribution of $\mathrm{p_{T}^{miss}}$ (GeV) in 2L1T MisID CR events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction.
The distribution of $\mathrm{M_{T}}$ (GeV) in 3L OnZ CR events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction.
The distribution of $\mathrm{H_{T}}$ (GeV) in 3L ttZ CR events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction.
Distribution of BDT score from the SS-M ($\mathrm{B_{e}=B_{\mu}=B_{\tau}}$) BDT for the 3L+2L1T CR events for the combined 2016-2018 data set. The 3L+2L1T CR consists of the 3L OnZ, 3L Z$\mathrm{\gamma}$, and 2L1T MisID CRs. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction.
The distribution of visible diboson $\mathrm{p_{T}}$ (GeV) in 4L ZZ CR events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction.
Distribution of BDT score from the SS-M ($\mathrm{B_{e}=B_{\mu}=B_{\tau}}$) BDT for the 4L ZZ CR events for the combined 2016-2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction.
The distribution of $\mathrm{L_{T}}$ in all seven multilepton channels for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton of $\mathrm{m_{\tau'}}$ = 1 TeV in the doublet scenario, before the fit, is also overlaid.
The distribution of $\mathrm{p_{T}^{miss}}$ in all seven multilepton channels for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermion of $\mathrm{m_{\Sigma}}$ = 1 TeV in the flavor-democratic scenario, before the fit, is also overlaid.
The distribution of $\mathrm{H_{T}}$ in all seven multilepton channels for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. For illustration, an example signal hypothesis for the production of the scalar leptoquark of $mathrm{m_{S}}$ = 1 TeV coupled to a top quark and a $\tau$ lepton, before the fit, is also overlaid.
The distribution of $\mathrm{M_{OSSF}}$ in channels with at least one light lepton pair (4L, 3L1T, 3L, 2L2T, and 2L1T) for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermion of $\mathrm{m_{\Sigma}}$ = 1 TeV in the flavor-democratic scenario, before the fit, is also overlaid.
The $\mathrm{N_{b}}$ distribution in 4L, 3L1T, 3L, 2L2T, 2L1T, 1L3T, and 1L2T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction.
The invariant mass distribution of the opposite-sign same-flavor ($\mathrm{M_{OSSF}}$) tau lepton pair distribution in 2L2T, 1L3T, and 1L2T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction.
The $\mathrm{M_{T}^{12}}$ distribution in 4L, 3L1T, 3L, 2L2T, 2L1T, 1L3T, and 1L2T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction.
The $\mathrm{N_{b}}$ distribution in 3L, 2L1T, and 1L2T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The gray band represents the sum of statistical and systematic uncertainties on the SM background predictions.
The $\mathrm{L_{T}}$ distribution in 3L, 2L1T, and 1L2T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The gray band represents the sum of statistical and systematic uncertainties on the SM background predictions.
The $\mathrm{p_{T}^{miss}}$ distribution in 3L, 2L1T, and 1L2T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The gray band represents the sum of statistical and systematic uncertainties on the SM background predictions.
The $\mathrm{H_{T}}$ distribution in 3L, 2L1T, and 1L2T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The gray band represents the sum of statistical and systematic uncertainties on the SM background predictions.
The $\mathrm{M_{OSSF}}$ distribution in 3L, and 2L1T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The gray band represents the sum of statistical and systematic uncertainties on the SM background predictions.
The invariant mass distribution of the opposite-sign different-flavor ($\mathrm{M_{OSDF}}$) light lepton pair distribution in 3L, and 2L1T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The gray band represents the sum of statistical and systematic uncertainties on the SM background predictions.
The invariant mass distribution of the opposite-sign same-flavor ($\mathrm{M_{OSSF}}$) tau lepton pair distribution in 1L2T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The gray band represents the sum of statistical and systematic uncertainties on the SM background predictions.
The invariant mass distribution of the opposite-sign different-flavor ($\mathrm{M_{OSDF}}$) light lepton and tau lepton pair distribution in 2L1T, and 1L2T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The gray band represents the sum of statistical and systematic uncertainties on the SM background predictions.
The $\mathrm{M_{T}^{1}}$ distribution in 3L, 2L1T, and 1L2T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The gray band represents the sum of statistical and systematic uncertainties on the SM background predictions.
The $\mathrm{M_{T}^{12}}$ distribution in 3L, 2L1T, and 1L2T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The gray band represents the sum of statistical and systematic uncertainties on the SM background predictions.
The model independent fundamental table categories for the combined 2016-2018 data set, as defined in Table 1. The gray band represents the sum of statistical and systematic uncertainties on the SM background predictions.
The $\mathrm{N_{b}}$ distribution in 4L, 3L1T, 2L2T, and 1L3T events for the combined 2016-2018 data set. The rightmost bin contains the overflow events. The gray band represents the sum of statistical and systematic uncertainties on the SM background predictions.
The SR distributions of the fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table in 3L channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table in 2L1T and 1L2T channels for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table in 3L channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table in 2L1T and 1L2T channels for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table in 4L, 3L1T, 2L2T, and 1L3T channels for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table in 4L, 3L1T, 2L2T, and 1L3T channels for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the fundamental $\mathrm{S_{T}}$ table in 3L channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the fundamental $\mathrm{S_{T}}$ table in 2L1T and 1L2T channels for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the fundamental $\mathrm{S_{T}}$ table in 3L channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the fundamental $\mathrm{S_{T}}$ table in 2L1T and 1L2T channels for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the fundamental $\mathrm{S_{T}}$ table in 4L, 3L1T, 2L2T, and 1L3T channels for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the fundamental $\mathrm{S_{T}}$ table in 4L, 3L1T, 2L2T, and 1L3T channels for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 3L 0B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 3L 1B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 3L 2B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 2L1T 0B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 2L1T 1B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 2L1T 2B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 1L2T channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. An example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid. For this category, the signal yield is negligible and is not visible in the figure.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 3L 0B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 3L 1B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 3L 2B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 2L1T 0B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 2L1T 1B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 2L1T 2B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 1L2T channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. An example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid. For this category, the signal yield is negligible and is not visible in the figure.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 4L 0B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 4L 1B/2B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 3L1T, 2L2T, and 1L3T channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 4L 0B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 4L 1B/2B channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The SR distributions of the advanced $\mathrm{S_{T}}$ table in 3L1T, 2L2T, and 1L3T channel for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The VLL-L BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 200 GeV, before the fit, is also overlaid.
The VLL-L BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 200 GeV, before the fit, is also overlaid.
The VLL-L BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 200 GeV, before the fit, is also overlaid.
The VLL-M BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 400 GeV, before the fit, is also overlaid.
The VLL-M BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 400 GeV, before the fit, is also overlaid.
The VLL-M BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 400 GeV, before the fit, is also overlaid.
The VLL-H BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 900 GeV, before the fit, is also overlaid.
The VLL-H BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 900 GeV, before the fit, is also overlaid.
The VLL-H BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 900 GeV, before the fit, is also overlaid.
The VLL-L BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 200 GeV, before the fit, is also overlaid.
The VLL-L BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 200 GeV, before the fit, is also overlaid.
The VLL-L BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 200 GeV, before the fit, is also overlaid.
The VLL-M BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 400 GeV, before the fit, is also overlaid.
The VLL-M BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 400 GeV, before the fit, is also overlaid.
The VLL-M BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 400 GeV, before the fit, is also overlaid.
The VLL-H BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 900 GeV, before the fit, is also overlaid.
The VLL-H BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 900 GeV, before the fit, is also overlaid.
The VLL-H BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 900 GeV, before the fit, is also overlaid.
The SS-VL $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 100 GeV, before the fit, is also overlaid.
The SS-VL $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 100 GeV, before the fit, is also overlaid.
The SS-VL $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 100 GeV, before the fit, is also overlaid.
The SS-L $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 300 GeV, before the fit, is also overlaid.
The SS-L $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 300 GeV, before the fit, is also overlaid.
The SS-L $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 300 GeV, before the fit, is also overlaid.
The SS-M $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 550 GeV, before the fit, is also overlaid.
The SS-M $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 550 GeV, before the fit, is also overlaid.
The SS-M $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 550 GeV, before the fit, is also overlaid.
The SS-H $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SS-H $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SS-H $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SS-VL $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 100 GeV, before the fit, is also overlaid.
The SS-VL $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 100 GeV, before the fit, is also overlaid.
The SS-VL $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 100 GeV, before the fit, is also overlaid.
The SS-L $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 300 GeV, before the fit, is also overlaid.
The SS-L $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 300 GeV, before the fit, is also overlaid.
The SS-L $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 300 GeV, before the fit, is also overlaid.
The SS-M $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 550 GeV, before the fit, is also overlaid.
The SS-M $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 550 GeV, before the fit, is also overlaid.
The SS-M $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 550 GeV, before the fit, is also overlaid.
The SS-H $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 850 GeV, before the fit, is also overlaid.
The SS-H $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 850 GeV, before the fit, is also overlaid.
The SS-H $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 850 GeV, before the fit, is also overlaid.
The SS-VL $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 100 GeV, before the fit, is also overlaid.
The SS-VL $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 100 GeV, before the fit, is also overlaid.
The SS-VL $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 100 GeV, before the fit, is also overlaid.
The SS-L $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 300 GeV, before the fit, is also overlaid.
The SS-L $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 300 GeV, before the fit, is also overlaid.
The SS-L $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 300 GeV, before the fit, is also overlaid.
The SS-M $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 550 GeV, before the fit, is also overlaid.
The SS-M $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 550 GeV, before the fit, is also overlaid.
The SS-M $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 550 GeV, before the fit, is also overlaid.
The SS-H $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SS-H $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SS-H $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SS-VL $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 100 GeV, before the fit, is also overlaid.
The SS-VL $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 100 GeV, before the fit, is also overlaid.
The SS-VL $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 100 GeV, before the fit, is also overlaid.
The SS-L $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 300 GeV, before the fit, is also overlaid.
The SS-L $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 300 GeV, before the fit, is also overlaid.
The SS-L $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 300 GeV, before the fit, is also overlaid.
The SS-M $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 550 GeV, before the fit, is also overlaid.
The SS-M $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 550 GeV, before the fit, is also overlaid.
The SS-M $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 550 GeV, before the fit, is also overlaid.
The SS-H $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 850 GeV, before the fit, is also overlaid.
The SS-H $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 850 GeV, before the fit, is also overlaid.
The SS-H $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the scenario with mixing exclusively to $\tau$ lepton for $\mathrm{m_{\Sigma}}$ = 850 GeV, before the fit, is also overlaid.
The LQ-VL $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 200 GeV, before the fit, is also overlaid.
The LQ-VL $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 200 GeV, before the fit, is also overlaid.
The LQ-VL $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 200 GeV, before the fit, is also overlaid.
The LQ-L $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and an electron for $\mathrm{m_{S}}$ = 400 GeV, before the fit, is also overlaid.
The LQ-L $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and an electron for $\mathrm{m_{S}}$ = 400 GeV, before the fit, is also overlaid.
The LQ-L $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and an electron for $\mathrm{m_{S}}$ = 400 GeV, before the fit, is also overlaid.
The LQ-M $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 700 GeV, before the fit, is also overlaid.
The LQ-M $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 700 GeV, before the fit, is also overlaid.
The LQ-M $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 700 GeV, before the fit, is also overlaid.
The LQ-H $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and an electron for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The LQ-H $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and an electron for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The LQ-H $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and an electron for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
The LQ-VL $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 200 GeV, before the fit, is also overlaid.
The LQ-VL $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 200 GeV, before the fit, is also overlaid.
The LQ-VL $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 200 GeV, before the fit, is also overlaid.
The LQ-L $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 400 GeV, before the fit, is also overlaid.
The LQ-L $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 400 GeV, before the fit, is also overlaid.
The LQ-L $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 400 GeV, before the fit, is also overlaid.
The LQ-M $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 700 GeV, before the fit, is also overlaid.
The LQ-M $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 700 GeV, before the fit, is also overlaid.
The LQ-M $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 700 GeV, before the fit, is also overlaid.
The LQ-H $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 1.2 TeV, before the fit, is also overlaid.
The LQ-H $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 1.2 TeV, before the fit, is also overlaid.
The LQ-H $\mathrm{B_{\tau}=1}$ BDT regions for the 3-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 1.2 TeV, before the fit, is also overlaid.
The LQ-VL $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 200 GeV, before the fit, is also overlaid.
The LQ-VL $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 200 GeV, before the fit, is also overlaid.
The LQ-VL $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 200 GeV, before the fit, is also overlaid.
The LQ-L $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and an electron for $\mathrm{m_{S}}$ = 400 GeV, before the fit, is also overlaid.
The LQ-L $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and an electron for $\mathrm{m_{S}}$ = 400 GeV, before the fit, is also overlaid.
The LQ-L $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and an electron for $\mathrm{m_{S}}$ = 400 GeV, before the fit, is also overlaid.
The LQ-M $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 700 GeV, before the fit, is also overlaid.
The LQ-M $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 700 GeV, before the fit, is also overlaid.
The LQ-M $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 700 GeV, before the fit, is also overlaid.
The LQ-H $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and an electron for $\mathrm{m_{S}}$ = 1.2 TeV, before the fit, is also overlaid.
The LQ-H $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and an electron for $\mathrm{m_{S}}$ = 1.2 TeV, before the fit, is also overlaid.
The LQ-H $\mathrm{B_{e}+B_{\mu}=1}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and an electron for $\mathrm{m_{S}}$ = 1.2 TeV, before the fit, is also overlaid.
The LQ-VL $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 200 GeV, before the fit, is also overlaid.
The LQ-VL $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 200 GeV, before the fit, is also overlaid.
The LQ-VL $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 200 GeV, before the fit, is also overlaid.
The LQ-L $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 400 GeV, before the fit, is also overlaid.
The LQ-L $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 400 GeV, before the fit, is also overlaid.
The LQ-L $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 400 GeV, before the fit, is also overlaid.
The LQ-M $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 700 GeV, before the fit, is also overlaid.
The LQ-M $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 700 GeV, before the fit, is also overlaid.
The LQ-M $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 700 GeV, before the fit, is also overlaid.
The LQ-H $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2016 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 1.2 TeV, before the fit, is also overlaid.
The LQ-H $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2017 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 1.2 TeV, before the fit, is also overlaid.
The LQ-H $\mathrm{B_{\tau}=1}$ BDT regions for the 4-lepton channels for the 2018 data set. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background prediction. The expected SM background distributions and the uncertainties are shown after fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a $\tau lepton$ for $\mathrm{m_{S}}$ = 1.2 TeV, before the fit, is also overlaid.
Observed and expected upper limits at 95%% CL on the production cross section for the type-III seesaw fermions in the flavor-democratic scenario using the table schemes and the BDT regions of the SS-M and the SS-H $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ BDTs. To the left of the vertical dashed gray line, the limits are shown from the advanced $\mathrm{S_{T}}$ table, and to the right the limits are shown from the BDT regions.
Observed and expected upper limits at 95%% CL on the production cross section for the vector-like $\mathrm{\tau}$ leptons: doublet model. To the left of the vertical dashed gray line, the limits are shown from the advanced $\mathrm{S_{T}}$ table, and to the right the limits are shown from the BDT regions.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks: $\mathrm{B_{\tau}=1}$ and $\mathrm{\beta=1}$. To the left of the vertical dashed gray line, the limits are shown from the advanced $\mathrm{S_{T}}$ table, and to the right the limits are shown from the BDT regions.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks: $\mathrm{B_{e}=1}$ and $\mathrm{\beta=1}$. To the left of the vertical dashed gray line, the limits are shown from the advanced $\mathrm{S_{T}}$ table, and to the right the limits are shown from the BDT regions.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks: $\mathrm{B_{\mu}=1}$ and $\mathrm{\beta=1}$. To the left of the vertical dashed gray line, the limits are shown from the advanced $\mathrm{S_{T}}$ table, and to the right the limits are shown from the BDT regions.
Observed and expected upper limits at 95% CL on the production cross section for the vector-like $\mathrm{\tau}$ leptons: singlet model. The limit is shown from the advanced $\mathrm{S_{T}}$ table for all masses.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ scenario using the BDT regions.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ scenario using the Fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ scenario using the Fundamental $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{e}=B_{\mu}=B_{\tau}}$ scenario using the Advanced $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{\mu}=1}$ scenario using the BDT regions.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{\mu}=1}$ scenario using the Fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{\mu}=1}$ scenario using the Fundamental $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{\mu}=1}$ scenario using the Advanced $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{e}=1}$ scenario using the BDT regions.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{e}=1}$ scenario using the Fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{e}=1}$ scenario using the Fundamental $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{e}=1}$ scenario using the Advanced $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{\tau}=1}$ scenario using the BDT regions.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{\tau}=1}$ scenario using the Fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{\tau}=1}$ scenario using the Fundamental $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the type-III seesaw fermions in the $\mathrm{B_{\tau}=1}$ scenario using the Advanced $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{\mu}=1}$ scenario using the BDT regions.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{\mu}=1}$ scenario using the Fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{\mu}=1}$ scenario using the Fundamental $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{\mu}=1}$ scenario using the Advanced $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{e}=1}$ scenario using the BDT regions.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{e}=1}$ scenario using the Fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{e}=1}$ scenario using the Fundamental $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{e}=1}$ scenario using the Advanced $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{\tau}=1}$ scenario using the BDT regions.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{\tau}=1}$ scenario using the Fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{\tau}=1}$ scenario using the Fundamental $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{\tau}=1}$ scenario using the Advanced $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the vector-like $\tau$ leptons in the doublet scenario using the BDT regions.
Observed and expected upper limits at 95% CL on the production cross section for the vector-like $\tau$ leptons in the doublet scenario using the Fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the vector-like $\tau$ leptons in the doublet scenario using the Fundamental $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the vector-like $\tau$ leptons in the doublet scenario using the Advanced $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the vector-like $\tau$ leptons in the singlet scenario using the Fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the vector-like $\tau$ leptons in the singlet scenario using the Fundamental $\mathrm{S_{T}}$ table.
Observed and expected upper limits at 95% CL on the production cross section for the vector-like $\tau$ leptons in the singlet scenario using the Advanced $\mathrm{S_{T}}$ table.
Observed lower limits at 95% CL on the mass of the type-III seesaw fermions in the plane defined by $\mathrm{B_{e}}$ and $\mathrm{B_{\tau}}$, with the constraint that $\mathrm{B_{e}+B_{\mu}+B_{\tau}=1}$. These limits arise from the SS-H $\mathrm{B_{\tau}=1}$ BDT when $\mathrm{B_{\tau}\geq0.9}$, and by the SS-H $\mathrm{B_{e}+B_{\mu}+B_{\tau}=1}$ BDT for the other decay branching fraction combinations.
Median Expected lower limits at 95% CL on the mass of the type-III seesaw fermions in the plane defined by $\mathrm{B_{e}}$ and $\mathrm{B_{\tau}}$, with the constraint that $\mathrm{B_{e}+B_{\mu}+B_{\tau}=1}$. These limits arise from the SS-H $\mathrm{B_{\tau}=1}$ BDT when $\mathrm{B_{\tau}\geq0.9}$, and by the SS-H $\mathrm{B_{e}+B_{\mu}+B_{\tau}=1}$ BDT for the other decay branching fraction combinations.
Acceptance times efficiency values for the major SM backgrounds WZ, ZZ, and ttZ in the signal regions of all seven multilepton channels. The product is defined as the ratio of the total reconstructed yield in a given channel (after all the corrections and scale factor implementation) to the product of luminosity and the production cross section of the given simulation sample. The statistical uncertainty on the acceptance times efficiency values is insignificant with respect to the quoted precision.
Acceptance times efficiency values with statistical uncertainty for the vector-like $\mathrm{\tau}$ lepton model in the doublet scenario in the signal regions of all seven multilepton channels. The product is defined as the ratio of the total reconstructed yield in a given channel (after all the corrections and scale factor implementation) to the product of luminosity and the production cross section of the given simulation sample.
Acceptance times efficiency values with statistical uncertainty for the vector-like $\mathrm{\tau}$ lepton model in the singlet scenario in the signal regions of all seven multilepton channels. The product is defined as the ratio of the total reconstructed yield in a given channel (after all the corrections and scale factor implementation) to the product of luminosity and the production cross section of the given simulation sample.
Acceptance times efficiency values with statistical uncertainty for the type-III seesaw fermions in the $\mathrm{(B_{e}=B_{\mu}=B_{\tau})}$ scenario in the signal regions of all seven multilepton channels. The product is defined as the ratio of the total reconstructed yield in a given channel (after all the corrections and scale factor implementation) to the product of luminosity and the production cross section of the given simulation sample.
Acceptance times efficiency values with statistical uncertainty for the type-III seesaw fermions in the $\mathrm{(B_{e}=1)}$ scenario in the signal regions of all seven multilepton channels. The product is defined as the ratio of the total reconstructed yield in a given channel (after all the corrections and scale factor implementation) to the product of luminosity and the production cross section of the given simulation sample.
Acceptance times efficiency values with statistical uncertainty for the type-III seesaw fermions in the $\mathrm{(B_{\mu}=1)}$ scenario in the signal regions of all seven multilepton channels. The product is defined as the ratio of the total reconstructed yield in a given channel (after all the corrections and scale factor implementation) to the product of luminosity and the production cross section of the given simulation sample.
Acceptance times efficiency values with statistical uncertainty for the type-III seesaw fermions in the $\mathrm{B_{\tau}=1)}$ scenario in the signal regions of all seven multilepton channels. The product is defined as the ratio of the total reconstructed yield in a given channel (after all the corrections and scale factor implementation) to the product of luminosity and the production cross section of the given simulation sample.
Acceptance times efficiency values with statistical uncertainty for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{\tau}=1}$ scenario in the signal regions of all seven multilepton channels. The product is defined as the ratio of the total reconstructed yield in a given channel (after all the corrections and scale factor implementation) to the product of luminosity and the production cross section of the given simulation sample.
Acceptance times efficiency values with statistical uncertainty for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{e}=1}$ scenario in the signal regions of all seven multilepton channels. The product is defined as the ratio of the total reconstructed yield in a given channel (after all the corrections and scale factor implementation) to the product of luminosity and the production cross section of the given simulation sample.
Acceptance times efficiency values with statistical uncertainty for the scalar leptoquarks with $\mathrm{\beta=1}$ in the $\mathrm{B_{\mu}=1}$ scenario in the signal regions of all seven multilepton channels. The product is defined as the ratio of the total reconstructed yield in a given channel (after all the corrections and scale factor implementation) to the product of luminosity and the production cross section of the given simulation sample.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of SM gauge bosons (W/Z/h) for 0.2<dRmin<0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of SM gauge bosons (W/Z/h) for dRmin>0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for 0.2<dRmin<0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for dRmin>0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for 0.2<dRmin<0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for dRmin>0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of $\tau$ leptons for 0.2<dRmin<0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of $\tau$ leptons for dRmin>0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of $\tau$ leptons for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of $\tau$ leptons for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of $\tau$ leptons for 0.2<dRmin<0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of $\tau$ leptons for dRmin>0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of $\tau$ leptons for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of $\tau$ leptons for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of $\tau$ leptons for 0.2<dRmin<0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of $\tau$ leptons for dRmin>0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of $\tau$ leptons for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for electrons in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of $\tau$ leptons for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|<1.2}$ region, arising from the decay of SM gauge bosons (W/Z/h) for 0.2<dRmin<0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|<1.2}$ region, arising from the decay of SM gauge bosons (W/Z/h) for dRmin>0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|<1.2}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|<1.2}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|>1.2}$ region, arising from the decay of SM gauge bosons (W/Z/h) for 0.2<dRmin<0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|>1.2}$ region, arising from the decay of SM gauge bosons (W/Z/h) for dRmin>0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|>1.2}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|>1.2}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|<1.2}$ region, arising from the decay of $\tau$ leptons for 0.2<dRmin<0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|<1.2}$ region, arising from the decay of $\tau$ leptons for dRmin>0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|<1.2}$ region, arising from the decay of $\tau$ leptons for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|<1.2}$ region, arising from the decay of $\tau$ leptons for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|>1.2}$ region, arising from the decay of $\tau$ leptons for 0.2<dRmin<0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|>1.2}$ region, arising from the decay of $\tau$ leptons for dRmin>0.4. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|>1.2}$ region, arising from the decay of $\tau$ leptons for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for muons in the $\mathrm{|\eta|>1.2}$ region, arising from the decay of $\tau$ leptons for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 1-prong $\tau_{h}$ in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of SM gauge bosons (W/Z/h) for dRmin>0.2. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 1-prong $\tau_{h}$ in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 1-prong $\tau_{h}$ in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 1-prong $\tau_{h}$ in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for dRmin>0.2. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 1-prong $\tau_{h}$ in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 1-prong $\tau_{h}$ in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 1-prong $\tau_{h}$ in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for dRmin>0.2. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 1-prong $\tau_{h}$ in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 1-prong $\tau_{h}$ in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 3-prong $\tau_{h}$ in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of SM gauge bosons (W/Z/h) for dRmin>0.2. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 3-prong $\tau_{h}$ in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 3-prong $\tau_{h}$ in the $\mathrm{|\eta|<1.1}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 3-prong $\tau_{h}$ in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for dRmin>0.2. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 3-prong $\tau_{h}$ in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 3-prong $\tau_{h}$ in the $\mathrm{|\eta|>1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 3-prong $\tau_{h}$ in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for dRmin>0.2. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 3-prong $\tau_{h}$ in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}<2}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
Reconstruction efficiency and associated uncertainty maps for 3-prong $\tau_{h}$ in the $\mathrm{1.1<|\eta|<1.6}$ region, arising from the decay of SM gauge bosons (W/Z/h) for $\mathrm{N_{j}>1}$. The lepton efficiency is estimated in a simulated event sample for the ZZ process. For a given input generator-level $\mathrm{p_{T}}$, the efficiency map provides the probability distribution of the reconstructed $\mathrm{p_{T}}$, accounting for reconstruction and identification efficiency, and the $\mathrm{p_{T}}$ resolution. The x-axis and the y-axis represent bins in the reconstructed and generated lepton $\mathrm{p_{T}}$, respectively.
The SR distributions of the Fundamental $\mathrm{L_{T}+p_{T}^{miss}}$ table for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the type-III seesaw heavy fermions in the flavor-democratic scenario for $\mathrm{m_{\Sigma}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the Fundamental $\mathrm{S_{T}}$ table for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the vector-like $\tau$ lepton in the doublet scenario for $\mathrm{m_{\tau'}}$ = 1 TeV, before the fit, is also overlaid.
The SR distributions of the Advanced $\mathrm{S_{T}}$ table for the combined 2016-2018 data set. The detailed description of the bin numbers can be found in Tables 3-6 in the paper. The lower panel shows the ratio of observed events to the total expected background prediction. The gray band on the ratio represents the sum of statistical and systematic uncertainties in the SM background predictions. The expected SM background distributions and the uncertainties are shown before fitting the data under the background-only hypothesis. For illustration, an example signal hypothesis for the production of the scalar leptoquark coupled to a top quark and a muon for $\mathrm{m_{S}}$ = 1.4 TeV, before the fit, is also overlaid.
A search for the central exclusive production of top quark-antiquark pairs ($\mathrm{t\bar{t}}$) is performed for the first time using proton-tagged events in proton-proton collisions at the LHC at a centre-of-mass energy of 13 TeV. The data correspond to an integrated luminosity of 29.4 fb$^{-1}$. The $\mathrm{t\bar{t}}$ decay products are reconstructed using the central CMS detector, while forward protons are measured in the CMS-TOTEM precision proton spectrometer. An observed (expected) upper bound on the production cross section of 0.59 (1.14) pb is set at 95% confidence level, for collisions of protons with fractional momentum losses between 2 and 20%.
Expected and observed 95% confidence level (CL) upper limits for the cross section of $\mathrm{pp} \rightarrow \mathrm{p t \bar{t} p}$, for the dilepton and $\ell+$jets channels separately and combined. The green and yellow bands show the 68 and 95% intervals, respectively, for the expected upper limit.
We present the first direct search for exotic Higgs boson decays H $\to$$\mathcal{A}\mathcal{A}$, $\mathcal{A}$$\to$$\gamma\gamma$ in events with two photonlike objects. The hypothetical particle $\mathcal{A}$ is a low-mass spin-0 particle decaying promptly to a merged diphoton reconstructed as a single photonlike object. We analyze the data collected by the CMS experiment at $\sqrt{s}$ = 13 TeV corresponding to an integrated luminosity of 136 fb$^{-1}$. No excess above the estimated background is found. We set upper limits on the branching fraction $\mathcal{B}$(H $\to$$\mathcal{A}\mathcal{A}$$\to$ 4$\gamma$) of (0.9-3.3) $\times$ 10$^{-3}$ at 95% confidence level for masses of $\mathcal{A}$ in the range 0.1-1.2 GeV.
Observed and median expected 95% confidence level (CL) upper limits on $\mathcal{B}(\mathrm{H} \rightarrow \mathcal{A}\mathcal{A} \rightarrow 4\gamma)$ as a function of $m_{\mathcal{A}}$ for prompt $\mathcal{A}$ decays. The 68% and 95% confidence intervals (CIs) around the median expected upper limit are also provided.
Differential cross sections are measured for the standard model Higgs boson produced in association with vector bosons (W, Z) and decaying to a pair of b quarks. Measurements are performed within the framework of the simplified template cross sections. The analysis relies on the leptonic decays of the W and Z bosons, resulting in final states with 0, 1, or 2 electrons or muons. The Higgs boson candidates are either reconstructed from pairs of resolved b-tagged jets, or from single large distance parameter jets containing the particles arising from two b quarks. Proton-proton collision data at $\sqrt{s}$ = 13 TeV, collected by the CMS experiment in 2016-2018 and corresponding to a total integrated luminosity of 138 fb$^{-1}$, are analyzed. The inclusive signal strength, defined as the product of the observed production cross section and branching fraction relative to the standard model expectation, combining all analysis categories, is found to be $\mu$ = 1.15$^{+0.22}_{-0.20}$. This corresponds to an observed (expected) significance of 6.3 (5.6) standard deviations.
Measured product of cross section and branching fraction as well as signal strength, defined as the ratio of the observed signal cross section to the Standard Model expectation, in the V(leptonic)H STXS process scheme from the analysis of the 2016, 2017 and 2018 data. If the observed signal strength for a given STXS bin is negative, no uncertainty is reported for the associated bin.
Signal strength per signal process. All results combine the 2016, 2017 and 2018 data-taking years.
Signal strength per analysis channels. All results combine the 2016, 2017 and 2018 data-taking years.
A search for resonances in events with the $\gamma$+jet final state has been performed using proton-proton collision data collected at $\sqrt{s}$ = 13 TeV by the CMS experiment at the LHC. The total data analyzed correspond to an integrated luminosity of 138 fb$^{-1}$. Models of excited quarks and quantum black holes are considered. Using a wide-jet reconstruction for the candidate jet, the $\gamma$+jet invariant mass spectrum measured in data is examined for the presence of resonances over the standard model continuum background. The background is estimated by fitting the mass distribution with a functional form. The data exhibit no statistically significant deviations from the expected standard model background. Exclusion limits at 95% confidence level on the resonance mass and other parameters are set. Excited light-flavor quarks (excited bottom quarks) are excluded up to a mass of 6.0 (3.8) TeV. Quantum black hole production is excluded for masses up to 7.5 (5.2) TeV in the Arkani-Hamed-Dimopoulos-Dvali (Randall-Sundrum) model. These lower mass bounds are the most stringent to date among those obtained in the $\gamma$+jet final state.
The signal cross-sections values of the signals q* with coupling mupltiplier f =1.0 and f = 0.5, as a function of resonance mass
The signal cross-sections values of the signals b* with coupling mupltiplier f =1.0 and f = 0.5, as a function of resonance mass
The signal cross-sections values of the signal QBH ADD with n=6 extra dimensions, as a function of threshold mass
The signal cross-sections values of the signal QBH RS1 with n=1 extra dimensions, as a function of threshold mass
The product of acceptance and selection efficiency for QBH ADD model, as a function of threshold mass of the signal.
The product of acceptance and selection efficiency for QBH RS1 models, as a function of threshold mass of the signal.
The product of acceptance and selection efficiency for q* signal, as a function of resonance mass
The product of acceptance and selection efficiency for b* signal, as a function of resonance mass of the signal.
Distributions of the γ+jet invariant mass generated from various signal samples for reconstructed mass 4 TeV
Fitting distribution of data with expected q*, and QBH signal events, and fit parameters p0= 3.05674e+00, p1 = 10.5343, p3 = 4.15163 and p4 = 0.107405
Fitting distribution of data with expected b* events, and fit parameters p0= 1.45055e+03, p1 = 2.04830e+01, p3 = -4.16760e-01 and p4 = -5.07768e-01
Fitting distribution of data with expected b* events for 0btag category, and fit parameters p0= 2.44120e+00, p1 = 1.08886e+01, p3 = 4.23198e+00 and p4 = 1.16300e-01
Exclusion limits on the product of cross section and branching fraction for q* signal coupling f = 1.0, as a function of the resonance mass hypothesis.
Theoretical cross-section of q* signal for coupling multiplier f =1.0
Exclusion limits on the product of cross section and branching fraction for the q* signal coupling f = 0.5, as a function of the resonance mass hypothesis.
Theoretical cross-section of q* signal for coupling multiplier f =0.5
Exclusion limits on the product of cross section and branching fraction for q* coupling f = 0.1, as a function of the resonance mass hypothesis.
Theoretical cross-section of q* signal for coupling multiplier f =0.1
Exclusion limits on the product of cross section and branching fraction for b* signal coupling f = 1.0, as a function of the resonance mass hypothesis.
Theoretical cross-section of b* signal for coupling multiplier f =1.0
Exclusion limits on the product of cross section and branching fraction for b* signal coupling f = 0.5, as a function of the resonance mass hypothesis.
Theoretical cross-section of b* signal for coupling multiplier f =0.5
Exclusion limits on the product of cross section and branching fraction for b* signal coupling f = 0.1, as a function of the resonance mass hypothesis.
Theoretical cross-section of b* signal for coupling multiplier f =0.1
Exclusion limits on the product of cross section and branching fraction for QBH ADD signal, as a function of the mass hypothesis.
Theoretical cross-section of ADD signal
Exclusion limits on the product of cross section and branching fraction for QBH RS1 signal, as a function of the mass hypothesis.
Theoretical cross-section of RS1 signal
The expected and observed exclusion mass limits for q* and b* signals, as a function coupling multiplier
The observed exclusion mass limits for b* signal, as a function of threshold mass of the signal.
A search for a charged Higgs boson H$^\pm$ decaying into a heavy neutral Higgs boson H and a W boson is presented. The analysis targets the H decay into a pair of tau leptons with at least one of them decaying hadronically and with an additional electron or muon present in the event. The search is based on proton-proton collision data recorded by the CMS experiment during 2016-2018 at $\sqrt{s}$ = 13 TeV, corresponding to an integrated luminosity of 138 fb$^{-1}$. The data are consistent with standard model background expectations. Upper limits at 95% confidence level are set on the product of the cross section and branching fraction for an H$^\pm$ in the mass range of 300-700 GeV, assuming an H with a mass of 200 GeV. The observed limits range from 0.085 pb for an H$^\pm$ mass of 300 GeV to 0.019 pb for a mass of 700 GeV. These are the first limits on H$^\pm$ production in the H$^\pm$ $\to$ HW$^\pm$ decay channel at the LHC.
Expected and observed upper limits at 95% CL on the product of cross section and branching fraction as a function of mH+ and assuming mH = 200 GeV for the combination of all final states considered.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But, sometimes you may wish to be more specific. Here we show you how.
Guidance and examples on the query string syntax can be found in the Elasticsearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.