Modern physics experiments are frequently very complex, relying on multiple simultaneous events to happen in order to obtain the desired result. The experiment control system plays a central role in orchestrating the measurement setup: However, its development is often treated as secondary with respect to the hardware, its importance becoming evident only during the operational phase. Therefore, the AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) collaboration has created a framework for easily coding control systems, specifically targeting atomic, quantum, and antimatter experiments. This framework, called Total Automation of LabVIEW Operations for Science (TALOS), unifies all the machines of the experiment in a single entity, thus enabling complex high-level decisions to be taken, and it is constituted by separate modules, called MicroServices, that run concurrently and asynchronously. This enhances the stability and reproducibility of the system while allowing for continuous integration and testing while the control system is running. The system demonstrated high stability and reproducibility, running completely unsupervised during the night and weekends of the data-taking campaigns. The results demonstrate the suitability of TALOS to manage an entire physics experiment in full autonomy: being open-source, experiments other than the AEgIS experiment can benefit from it.
Graph showing the number of antiprotons captured vs the closure timing of the trap. It clearly shows the presence of a best working point. Closing too fast lets some antiprotons out, and, conversely, closing too slow lets some antiprotons escape after the bounce on the second electrode.
Graph showing the number of antiprotons captured varying the potential of the catching electrodes. This scan characterizes the energy profile of the p's passing through the degrader, and their ratio is in good accordance with our GEANT4 simulations.
Two graphs show the results of the scan over the horizontal and vertical displacements of the antiproton beam (on the left) and the horizontal and vertical angles (see Table 4, after). The color represents the intensity of the signal obtained on the MCP from the annihilations of the trapped antiprotons. The parameter space has been organized in this way, assuming that displacements and angles have independent effects, not for physics reasons, but because scanning over the full parameter space would have been impossible time-wise (10 steps per dimension 4 dimensions x 5 min of duration of the script ~35 days!).
A powerful and robust control system is a crucial, often neglected, pillar of any modern, complex physics experiment that requires the management of a multitude of different devices and their precise time synchronisation. The AEgIS collaboration presents CIRCUS, a novel, autonomous control system optimised for time-critical experiments such as those at CERN's Antiproton Decelerator and, more broadly, in atomic and quantum physics research. Its setup is based on Sinara/ARTIQ and TALOS, integrating the ALPACA analysis pipeline, the last two developed entirely in AEgIS. It is suitable for strict synchronicity requirements and repeatable, automated operation of experiments, culminating in autonomous parameter optimisation via feedback from real-time data analysis. CIRCUS has been successfully deployed and tested in AEgIS; being experiment-agnostic and released open-source, other experiments can leverage its capabilities.
Synchronous voltage ramp-up to 20 V on three high-voltage amplifier channels 10 μs subsequent to the arrival of a common trigger pulse at zero time in the figure. The inset shows a zoom to the shoulder region for a better visualisation of the synchronicity.
A feedback loop uses the uncorrected laser pulse timings (red squares) to calculate the deviation from the user setting (solid black line) over the course of an hour, and corrects the timing of the subsequent desired laser pulse that is used for the actual experiment (blue circles). Independent of short-term to long-term drifts or even sudden jumps, the resulting timing is always close to the desired value.
A feedback loop uses the uncorrected laser pulse timings (red squares) to calculate the deviation from the user setting (solid black line) over the course of an hour, and corrects the timing of the subsequent desired laser pulse that is used for the actual experiment (blue circles). Independent of short-term to long-term drifts or even sudden jumps, the resulting timing is always close to the desired value.
A new algorithm is presented to discriminate reconstructed hadronic decays of tau leptons ($\tau_\mathrm{h}$) that originate from genuine tau leptons in the CMS detector against $\tau_\mathrm{h}$ candidates that originate from quark or gluon jets, electrons, or muons. The algorithm inputs information from all reconstructed particles in the vicinity of a $\tau_\mathrm{h}$ candidate and employs a deep neural network with convolutional layers to efficiently process the inputs. This algorithm leads to a significantly improved performance compared with the previously used one. For example, the efficiency for a genuine $\tau_\mathrm{h}$ to pass the discriminator against jets increases by 10-30% for a given efficiency for quark and gluon jets. Furthermore, a more efficient $\tau_\mathrm{h}$ reconstruction is introduced that incorporates additional hadronic decay modes. The superior performance of the new algorithm to discriminate against jets, electrons, and muons and the improved $\tau_\mathrm{h}$ reconstruction method are validated with LHC proton-proton collision data at $\sqrt{s} =$ 13 TeV.
Decay mode confusion matrix. For a given generated decay mode, the fractions of reconstructed tau_h in different decay modes are given, as well as the fraction of generated tau_h that are not reconstructed. Both the generated and reconstructed tau_h need to fulfil pt > 20 GeV and |eta| < 2.3. The tau_h candidates come from a Z to tau tau event sample with m(tau, tau) > 50 GeV.
Efficiency for quark and gluon jets to pass different tau identification discriminators versus the efficiency for genuine tau_h. The upper two plots are obtained with jets from the W+jets simulated sample and the lower two plots with jets from the tt sample. The left two plots include jets and genuine tau_h with pt < 100 GeV, whereas the right two plots include those with pt > 100 GeV. The working points are indicated as full circles. The efficiency for jets from the W+jets event sample, enriched in quark jets, to pass the discriminators is higher compared to jets from the tt event sample, which has a larger fraction of gluon and b-quark jets. The jet efficiency for a given tau_h efficiency is larger for jets and tau_h with pt < 100 GeV than for those with pt > 100 GeV. Compared with the previously used MVA discriminator, the DEEPTAU discriminator reduces the jet efficiency for a given tau_h efficiency by consistently more than a factor of 1.8, and by more at high tau_h efficiency. The additional gain at high pt comes from the inclusion of updated decay modes in the tau_h reconstruction, as illustrated by the curves for the previously used MVA discriminator but including reconstructed tau_h candidates with additional decay modes.
Efficiency for quark and gluon jets to pass different tau identification discriminators versus the efficiency for genuine tau_h. The upper two plots are obtained with jets from the W+jets simulated sample and the lower two plots with jets from the tt sample. The left two plots include jets and genuine tau_h with pt < 100 GeV, whereas the right two plots include those with pt > 100 GeV. The working points are indicated as full circles. The efficiency for jets from the W+jets event sample, enriched in quark jets, to pass the discriminators is higher compared to jets from the tt event sample, which has a larger fraction of gluon and b-quark jets. The jet efficiency for a given tau_h efficiency is larger for jets and tau_h with pt < 100 GeV than for those with pt > 100 GeV. Compared with the previously used MVA discriminator, the DEEPTAU discriminator reduces the jet efficiency for a given tau_h efficiency by consistently more than a factor of 1.8, and by more at high tau_h efficiency. The additional gain at high pt comes from the inclusion of updated decay modes in the tau_h reconstruction, as illustrated by the curves for the previously used MVA discriminator but including reconstructed tau_h candidates with additional decay modes.
The Transition Radiation Detector (TRD) was designed and built to enhance the capabilities of the ALICE detector at the Large Hadron Collider (LHC). While aimed at providing electron identification and triggering, the TRD also contributes significantly to the track reconstruction and calibration in the central barrel of ALICE. In this paper the design, construction, operation, and performance of this detector are discussed. A pion rejection factor of up to 410 is achieved at a momentum of 1 GeV/$c$ in p-Pb collisions and the resolution at high transverse momentum improves by about 40% when including the TRD information in track reconstruction. The triggering capability is demonstrated both for jet, light nuclei, and electron selection.
Most probable charge deposit signal normalised to that of minimum ionising particles as a function of $\beta\gamma$ for $\pi$, $\it{e}$ test beam (dE/dx). Statistical uncertainties as vertical error bars.
Most probable charge deposit signal normalised to that of minimum ionising particles as a function of $\beta\gamma$ for $\pi$, $\it{e}$ test beam (dE/dx + TR). Statistical uncertainties as vertical error bars.
Most probable charge deposit signal normalised to that of minimum ionising particles as a function of $\beta\gamma$ for $\pi$, $\it{e}$ and proton in pp collisions ($\sqrt{s} = 7$ TeV). Statistical uncertainties as vertical error bars. Uncertainties in momentum and thus $\beta \gamma$ determination are drawn as horizontal error bars.
A comprehensive study on the atmospheric neutrino flux in the energy region from sub-GeV up to several TeV using the Super-Kamiokande water Cherenkov detector is presented in this paper. The energy and azimuthal spectra of the atmospheric ${\nu}_e+{\bar{\nu}}_e$ and ${\nu}_{\mu}+{\bar{\nu}}_{\mu}$ fluxes are measured. The energy spectra are obtained using an iterative unfolding method by combining various event topologies with differing energy responses. The azimuthal spectra depending on energy and zenith angle, and their modulation by geomagnetic effects, are also studied. A predicted east-west asymmetry is observed in both the ${\nu}_e$ and ${\nu}_{\mu}$ samples at 8.0 {\sigma} and 6.0 {\sigma} significance, respectively, and an indication that the asymmetry dipole angle changes depending on the zenith angle was seen at the 2.2 {\sigma} level. The measured energy and azimuthal spectra are consistent with the current flux models within the estimated systematic uncertainties. A study of the long-term correlation between the atmospheric neutrino flux and the solar magnetic activity cycle is also performed, and a weak indication of a correlation was seen at the 1.1 {\sigma} level, using SK I-IV data spanning a 20 year period. For particularly strong solar activity periods known as Forbush decreases, no theoretical prediction is available, but a deviation below the typical neutrino event rate is seen at the 2.4 {\sigma} level.
Electron neutrino flux measured by SK I-IV data. Error written in percentage including both statistical and systematic uncertainties.
Muon neutrino flux measured by SK I-IV data. Error written in percentage including both statistical and systematic uncertainties.
The measurement of primary $\pi^{\pm}$, K$^{\pm}$, p and $\overline{p}$ production at mid-rapidity ($|y| <$ 0.5) in proton-proton collisions at $\sqrt{s} = 7$ TeV performed with ALICE (A Large Ion Collider Experiment) at the Large Hadron Collider (LHC) is reported. Particle identification is performed using the specific ionization energy loss and time-of-flight information, the ring-imaging Cherenkov technique and the kink-topology identification of weak decays of charged kaons. Transverse momentum spectra are measured from 0.1 up to 3 GeV/$c$ for pions, from 0.2 up to 6 GeV/$c$ for kaons and from 0.3 up to 6 GeV/$c$ for protons. The measured spectra and particle ratios are compared with QCD-inspired models, tuned to reproduce also the earlier measurements performed at the LHC. Furthermore, the integrated particle yields and ratios as well as the average transverse momenta are compared with results at lower collision energies.
Combined transverse momentum spectra of PI, K and P, sum of particles and antiparticles, measured at mid-rapidity in pp collisions at SQRT(S) = 7 TeV normalized to the number of inelastic collisions. Statistical and systematic uncertainties are reported. The uncertainty due to the normalization to inelastic collisions (+7-4 %) is not included.
Kaon/Pion ratio in pp collisions at SQRT(S) = 7 TeV.
Proton/Pion ratio in pp collisions at SQRT(S) = 7 TeV.
Forum