Nuclear transparencies measured in exclusive incoherent ρ0 meson production from hydrogen, deuterium, carbon, calcium, and lead in muon-nucleus scattering are reported. The data were obtained with the E665 spectrometer using the Fermilab Tevatron muon beam with a mean beam energy of 470 GeV. Increases in the nuclear transparencies are observed as the virtuality of the photon increases, in qualitative agreement with the expectations of color transparency.
No description provided.
We report data on proton-nucleon collisions obtained on Fermilab experiment E711, in which high transverse momentum hadrons are produced near 90° in the proton-nucleon center of mass forming high mass states, using an 800 GeV/c proton beam on targets of beryllium, aluminum, iron, and tungsten. The data presented cover the mass range from 7 to 15 GeV/c2, the three dihadron charge states ++, +-, and --, and parton-parton scattering angles up to cosθ*=0.50. We present the differential mass dihadron cross section, as well as the angular and charge dependence of the measurement. The cross section as a function of the parton-parton scattering angle for the three charge states is shown to vary linearly with the value of the atomic weight. While the angular distributions are shown to be independent of the target type, a small dependence on the charge state of the distributions is observed. The data are shown to be in good agreement with extrapolations from previous measurements and phenomenological QCD calculations.
Atomic weight dependence as function of the parton-parton scattering angle. This angle (theta cm) is defined as the polar angle between the dihadron axis and the beam director in the rest frame of the massive dihadron state. Cross section parameterised as SIG0(MASS**A). Measurements of A are presented here as POWER(N=A,YN=SIG).
Atomic weight dependence as function of the parton-parton scattering angle. This angle (theta cm) is defined as the polar angle between the dihadron axis and the beam director in the rest frame of the massive dihadron state. Cross section parameterised as SIG0(MASS**A). Measurements of A are presented here as POWER(N=A,YN=SIG).
Errors are statistical only.
We report results from Fermilab experiment E769 on the differential cross sections of D*± charm vector mesons with respect to Feynman-x (xF) and transverse momentum (PT), and on the atomic mass dependence of the production. The D* mesons were produced by a 250 GeV π beam on a target of Be, Al, Cu, and W foils. The dσdxF distribution is fit by the form ((1−xF)n) with n=3.5±0.3±0.1, the dσdPT2 distribution by exp(−b×PT2) with b=0.70±0.07±0.04 GeV−2, and the cross section A dependence by Aα with α=1.00±0.07±0.02. These results are compared to the equivalent parameters for the production of pseudoscalar D0 and D± charm mesons.
Data are in arbitrary units and are the weighted averages bin-by-bin for the 3 D0 modes KPI, K3PI and KPIPI0.
Data are in arbitrary units and are the weighted averages bin-by-bin for the 3 modes KPI, K3PI and KPIPI0.
Results of fit to DSIG/DXL distribution of the form (1-XL)**POWER in the XL range 0.1 to 0.6.
We present a measurement and comparison of the χc1 and χc2 production cross sections determined from interactions of 300-GeV/c π± and p with a Li target. We find χc1χc2 production ratios of 0.52−0.27+0.57 and 0.08−0.15+0.25 from reactions induced by π± and p, respectively.
The cross section per nucleon.
The cross section per nucleon. The differential cross section is fitted by the equation : D(SIG)/D(PT**2)= CONST*EXP(SLOPE*PT), D(SIG)/D(XL) = CONST*(1-(XL-CONST(C=X0))**2)**POWER(C=1) , and D(SIG)/D(XL) = CONST*(1-ABS(XL-CONST(C=XC)))**POWER(C=2).
The cross section per nucleon. The differential cross section is fitted by the equation : D(SIG)/D(COS(THETA)) = CONST*(1+CONST*COS(THETA)**2), where THETA is the angle between the MU+ and beam momentum in the CHI/C rest frame.
The transverse momentum distributions for\(\rho ^0 (770),f_2 (1270),K*^0 (892),\bar K*^0 (892)\) and ϕ (1020) have been studied in thept region between 2 and 4 GeV/c and central rapidity. The data analysed come from the WA77 experiment at CERN with a 300 GeV/c π− beam incident on a Be target. These distributions are well described by the functionpt−n withn∼8. A sample of simulated events from the Lund Monte Carlo in the same experimental conditions reproduces well the data.
No description provided.
Acceptance corrected tranverse momentum distribution.
Acceptance corrected tranverse momentum distribution.
We present results from the initial run of Fermilab experiment E706. The data include incident π− and p beams at 500 GeV/c on Be and Cu targets, and span the kinematic ranges of transverse momentum and rapidity of 3.5≤pT≤10 GeV/c and −0.7≤yc.m.≤0.7, respectively. We have measured cross sections for π0 and direct-photon production, as well as the ηπ0 production ratio. From the data on Be and Cu, we have extracted the nuclear dependence of π0 production, parametrized as Aα. The cross sections are compared with next-to-leading-log QCD predictions for different choices of the QCD momentum scales and several sets of parton distribution functions.
No description provided.
No description provided.
No description provided.
We measure the relative cross sections for D mesons produced in interactions of π− and π+ beams with targets of Be, Cu, Al, and W. The measurement is based on 1400 fully reconstructed decays of the types D0→K−π+, D+→K−π+π+, and charge conjugates. We find that the cross section for the production of both neutral and charged D’s by either π− or π+ is well fitted by the form Aα where A is the atomic mass and α=1.00±0.05±0.02, where the errors are statistical and systematic, respectively. There is no significant dependence of α on the transverse or longitudinal momentum of the D meson or on the charge of either the incident pion or the produced D mesons.
No description provided.
We present total and differential cross sections for charm mesons produced in 600 GeV/ c π - emulsion interactions. Fits to d 2 σ / dx F dp T 2 ∞ (1−| x F |) n exp (- bp T 2 ) for 676 electronically reconstructed D mesons with x F >0 give n =4.25±0.24 ( stat .)±0.23 ( syst .) and b =0.76±0.03±0.03 ( GeV / c ) -2 . The total inclusive D + and D 0 cross sections are σ ( π - N → D ± ; x F >0) = 8.66±0.46±1.96 μb nucleon and σ(π - N→D 0 D 0 ; x F >0)=22.05±1.37±4.82μb nucleonk, where a linear dependence on the mean atomic weight of the target is assumed. These results are compared to next-to-leading order QCD predictions.
Linear A-dependence. Different modes of the charm mesons detection were used (see text for detail). The differential cross section is fitted by the equation : D2(SIG)/D(XL)/D(PT**2) = CONST*(1-XL)**POWER*EXP(-SLOPE*PT**2).
Linear A-dependence.
Charmed mesons, produced on silicon, copper and tungsten by 340 GeV π - , have been identified as peaks in invariant mass distributions. The comparison of the yields of charmed particles originating from interactions in Si, Cu and W allows the mass number dependence of the charm hadroproduction cross section to be measured. Assuming the usual parametrization σ c = σ 0 A α , we find α =0.92±0.06 for charmed mesons with 〈 x F 〉=0.24. We do not find any decrease of α with increasing x F in contrast to the case of the production of particles containing only light quarks.
SI, CU, and WT are used. The cross section is parametrized as : SIG = CONST*A**POWER.
Angular and momentum distributions have been measured for positrons from electron-positron pairs created in peripheral collisions of 6.4-TeV sulfur ions with fixed targets of Al, Pd, and Au. The data are compared with results of several theoretical treatments. Measured differential cross sections peak at low momentum (≤1 MeV/c), extend significantly to much higher momenta (>17 MeV/c), and concentrate sharply in the forward direction, along the ion-beam axis. Positron yields scale as the square of the target nuclear charge as predicted by theory.
No description provided.
Forum