Showing 10 of 20 results
Results are reported from a search for physics beyond the standard model in proton-proton collisions at a center-of-mass energy of $\sqrt{s} = $ 13 TeV. The search uses a signature of a single lepton, large jet and bottom quark jet multiplicities, and high sum of large-radius jet masses, without any requirement on the missing transverse momentum in an event. The data sample corresponds to an integrated luminosity of 35.9 fb$^{-1}$ recorded by the CMS experiment at the LHC. No significant excess beyond the prediction from standard model processes is observed. The results are interpreted in terms of upper limits on the production cross section for $R$-parity violating supersymmetric extensions of the standard model using a benchmark model of gluino pair production, in which each gluino decays promptly via $ {\mathrm{\widetilde{g}}} \rightarrow \mathrm{t} \mathrm{b} \mathrm{s} $. Gluinos with a mass below 1610 GeV are excluded at 95% confidence level.
Figure 8. Observed cross section upper limits at 95% CL for a model of gluino pair production with gluino->tbs compared to the gluino pair production cross section.
Figure 8. Expected limits at 95% CL and their ±1 sigma variations for a model of gluino pair production with gluino->tbs compared to the gluino pair production cross section.
Figure 8. Expected limits at 95% CL and their ±2 sigma variations for a model of gluino pair production with gluino->tbs compared to the gluino pair production cross section.
Figure 8. Gluino pair production cross section.
Table 1. Post-fit yields for the background-only fit, observed data, and expected yields for mgluino = 1600 GeV in each search bin.
This paper presents a search for direct electroweak gaugino or gluino pair production with a chargino nearly mass-degenerate with a stable neutralino. It is based on an integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ of $pp$ collisions at $\sqrt{s} = 13$ TeV collected by the ATLAS experiment at the LHC. The final state of interest is a disappearing track accompanied by at least one jet with high transverse momentum from initial-state radiation or by four jets from the gluino decay chain. The use of short track segments reconstructed from the innermost tracking layers significantly improves the sensitivity to short chargino lifetimes. The results are found to be consistent with Standard Model predictions. Exclusion limits are set at 95% confidence level on the mass of charginos and gluinos for different chargino lifetimes. For a pure wino with a lifetime of about 0.2 ns, chargino masses up to 460 GeV are excluded. For the strong production channel, gluino masses up to 1.65 TeV are excluded assuming a chargino mass of 460 GeV and lifetime of 0.2 ns.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the low-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($\tau_{\tilde{\chi}_{1}^{\pm}}$ = 0.2 ns and $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV) in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in electroweak channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of fake tracklet in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of muon background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of hadron and electron background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of signal ($m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}} = 500 GeV$) in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of total background in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Pixel-tracklet $p_{T}$ spectrum of observed data in strong channel in the high-Emiss region.
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 0.2 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Observed exclusion limit at 95% CL obtained in the strong production channel in terms of the gluino and chargino masses. The limit is shown assuming a chargino lifetime 1.0 ns.
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Expected exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Observed exclusion limit at 95% CL obtained in the electroweak production channel in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (fb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (pb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (pb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Model dependent upper limits on cross-section (pb) for the electroweak production are shown by grey numbers in terms of the chargino lifetime ($\tau_{\tilde{\chi}_{1}^{\pm}}$) and mass ($m_{\tilde{\chi}_{1}^{\pm}}$).
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the electroweak channel. The total signal acceptance $\times$ efficiency is defined as the probability of an event passing the signal region selection when an electroweak gaugino pair is produced in a pp collision.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
Total acceptance $\times$ efficiency of the strong channel. In white regions, no simulation sample is available. The left-upper triangle region is not allowed kinematically in wino-LSP scenarios. The total signal acceptance $\times$ efficiency is calculated relative to events in which the gluinos decay into electroweak gaugino pairs.
The generator-level acceptance after reconstruction, for selecting and reconstructing charginos as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the electroweak channel as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the electroweak channel as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the electroweak channel as a function of the chargino $eta$ and chargino decay radius (at generator level).
The generator-level acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the electroweak channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the electroweak channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the electroweak channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The generator-level acceptance after reconstruction, for selecting and reconstructing charginos as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance for charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level).
The generator-level acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
The acceptance $\times$ efficiency after reconstruction, for selecting and reconstructing charginos produced in the strong channel as a function of the chargino $\eta$ and chargino decay radius (at generator level). The acceptance $\times$ efficiency after reconstruction is the probability of a signal event, which passes all the event-level requirements, passing all the track/tracklet requirements after reconstruction.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in direct electroweak production with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
Summary of the selection criteria, and the corresponding observed number of events in data as well as the expected number of signal events in simulation for two benchmark models: a chargino produced in the strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. The expected number of signal events is normalised to 36.1 fb${}^{-1}$. The signal selection efficiencies are also shown in parentheses. The first row shows the number of events after the application of detector and data quality conditions. Requirements below the dashed line are applied to tracks and tracklets.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few electroweak signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
The event and tracklet generator-level acceptance and selection efficiency for a few strong signal models studied in this search. The last column shows the probability ($P$) for a reconstructed tracklet to have $p_{T}$ greater than 100 GeV.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Systematic uncertainties in the signal event yields at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. The uncertainty in the cross-section of the strong production is large due to the large effect from the PDF uncertainty.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anticorrelation between different backgrounds.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anti-correlation between different backgrounds.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anti-correlation between different backgrounds.
Observed events, expected background for null signal, and expected signal yields for two benchmark models: electroweak channel with ($m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (400 GeV, 0.2 ns) and strong channel with ($m_{\tilde{g}}$, $m_{\tilde{\chi}_{1}^{\pm}}$, $\tau_{\tilde{\chi}_{1}^{\pm}}$) = (1600 GeV, 500 GeV, 0.2 ns) in the high-Emiss region. Also shown are the probability of a background-only experiment being more signal-like than observed ($p_0$) and the upper limit on the model-independent visible cross-section at 95\% CL. The uncertainty in the total background yield is different from the sum of uncertainties in quadrature due to anti-correlation between different backgrounds.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracket background events is small.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracklet background events is small.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracklet background events is small.
Effects of systematic uncertainties on the signal exclusion significance at $m_{\tilde{\chi}_{1}^{\pm}}$ = 400 GeV for the electroweak channel and at $m_{\tilde{g}}$ = 1600 GeV, $m_{\tilde{\chi}_{1}^{\pm}}$ = 500 GeV for the strong channel. The lifetime of the chargino is not relevant here. Effects of uncertainties on the fake-tracklet background is smaller in the strong channel analysis because the estimated number of the fake-tracklet background events is small.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
Cross-section upper limits for the strong production, presented in unit of fb. Left-upper triangle region is unphysical because the wino mass is larger than the gluino mass.
A search for supersymmetry is presented based on proton-proton collision events containing identified hadronically decaying top quarks, no leptons, and an imbalance $p_\mathrm{T}^\text{miss}$ in transverse momentum. The data were collected with the CMS detector at the CERN LHC at a center-of-mass energy of 13 TeV, and correspond to an integrated luminosity of 35.9 fb$^{-1}$. Search regions are defined in terms of the multiplicity of bottom quark jet and top quark candidates, the $p_\mathrm{T}^\text{miss}$, the scalar sum of jet transverse momenta, and the $m_{\mathrm{T2}}$ mass variable. No statistically significant excess of events is observed relative to the expectation from the standard model. Lower limits on the masses of supersymmetric particles are determined at 95% confidence level in the context of simplified models with top quark production. For a model with direct top squark pair production followed by the decay of each top squark to a top quark and a neutralino, top squark masses up to 1020 GeV and neutralino masses up to 430 GeV are excluded. For a model with pair production of gluinos followed by the decay of each gluino to a top quark-antiquark pair and a neutralino, gluino masses up to 2040 GeV and neutralino masses up to 1150 GeV are excluded. These limits extend previous results.
A search for massive coloured resonances which are pair-produced and decay into two jets is presented. The analysis uses 36.7 fb$^{-1}$ of $\sqrt{s}=$ 13 TeV pp collision data recorded by the ATLAS experiment at the LHC in 2015 and 2016. No significant deviation from the background prediction is observed. Results are interpreted in a SUSY simplified model where the lightest supersymmetric particle is the top squark, $\tilde{t}$, which decays promptly into two quarks through $R$-parity-violating couplings. Top squarks with masses in the range 100 GeV < $m_{\tilde{t}}$ < 410 GeV are excluded at 95% confidence level. If the decay is into a $b$-quark and a light quark, a dedicated selection requiring two $b$-tags is used to exclude masses in the ranges 100 GeV < $m_{\tilde{t}}$ < 470 GeV and 480 GeV < $m_{\tilde{t}}$ < 610 GeV. Additional limits are set on the pair-production of massive colour-octet resonances.
- - - - - - - - - - - - - - - - - - - - <p><b>Cutflows:</b><br> <a href="79059?version=1&table=CutflowTable1">Stop 100GeV</a><br> <a href="79059?version=1&table=CutflowTable2">Stop 500GeV</a><br> <a href="79059?version=1&table=CutflowTable3">Coloron 1500GeV</a><br> </p> <p><b>Event Yields:</b><br> <a href="79059?version=1&table=SRdistribution1">Inclusive stop SR</a><br> <a href="79059?version=1&table=SRdistribution2">Inclusive coloron SR </a><br> <a href="79059?version=1&table=SRdistribution3">b-tagged stop SR</a><br> </p> <p><b>Acceptances and Efficiencies:</b><br> <a href="79059?version=1&table=Acceptance1">Inclusive stop SR, before mass window</a><br> <a href="79059?version=1&table=Acceptance2">Inclusive stop SR, after mass window</a><br> <a href="79059?version=1&table=Acceptance3">Inclusive coloron SR, before mass window</a><br> <a href="79059?version=1&table=Acceptance4">Inclusive coloron SR, after mass window</a><br> <a href="79059?version=1&table=Acceptance5">b-tagged stop SR, before mass window</a><br> <a href="79059?version=1&table=Acceptance6">b-tagged stop SR, after mass window</a><br> </p> <p><b>Cross section upper limits:</b><br> <a href="79059?version=1&table=Limitoncrosssection1">Inclusive stop SR</a><br> <a href="79059?version=1&table=Limitoncrosssection2">Inclusive coloron SR</a><br> <a href="79059?version=1&table=Limitoncrosssection3">b-tagged stop SR</a><br> </p> <p><b>Truth Code</b> and <b>SLHA Files</b> for the cutflows are available under "Resources" (purple button on the left) </p>
Cutflow table for a pair produced top squark of 100 GeV decaying into a b- and an s-quark.
Cutflow table for a pair produced top squark of 500 GeV decaying into a b- and an s-quark.
Cutflow table for a pair produced coloron of 1500 GeV decaying into two quarks.
The observed number of data, background and top squark signal events in each of the signal regions of the inclusive selection
The observed number of data, background and coloron signal events in each of the signal regions of the inclusive selection
The observed number of data, background and top squark signal events in each of the signal regions of the b-tagged selection
Signal acceptance and efficiency (in %) as a function of M(STOP), before mass windows
Signal acceptance (in %) and efficiency as a function of M(STOP), after mass windows
Signal acceptance and efficiency (in %) as a function of M(RHO), before mass windows
Signal acceptance and efficiency (in %) as a function of M(RHO), after mass windows
Signal acceptance (in %) and efficiency as a function of M(STOP), before mass windows
Signal acceptance (in %) and efficiency as a function of M(STOP), after mass windows
Cross section excluded at 95% CL as a function of the top squark mass, for a pair produced top squark with decays into a pair of light-quarks.
Cross section excluded at 95% CL as a function of the cooron mass, for a pair produced coloron with decays into a pair of light-quarks.
Cross section excluded at 95% CL as a function of the top squark mass, for a pair produced top squark with decays into a b- and an s-quark.
A search is presented for the direct pair production of the stop, the supersymmetric partner of the top quark, that decays through an $R$-parity-violating coupling to a final state with two leptons and two jets, at least one of which is identified as a $b$-jet. The dataset corresponds to an integrated luminosity of 36.1 fb$^{-1}$ of proton-proton collisions at a center-of-mass energy of $\sqrt{s} = 13$ TeV, collected in 2015 and 2016 by the ATLAS detector at the LHC. No significant excess is observed over the Standard Model background, and exclusion limits are set on stop pair production at a 95% confidence level. Lower limits on the stop mass are set between 600 GeV and 1.5 TeV for branching ratios above 10% for decays to an electron or muon and a $b$-quark.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR800 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 600 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR1100 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 600 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR800 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 700 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR1100 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 700 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR800 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 800 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR1100 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 800 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR800 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 900 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR1100 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 900 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR800 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1000 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR1100 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1000 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR800 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1050 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR1100 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1050 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 600 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1100 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 600 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1100 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 700 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1150 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 700 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1150 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 800 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1200 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 800 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1200 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 900 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1250 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 900 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1250 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1000 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1300 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1000 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1300 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1050 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1350 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1050 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1350 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1100 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1400 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1100 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1400 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1150 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1450 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1150 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1450 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1200 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1500 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1200 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1500 GeV stop. All limits are computed at 95% CL.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1250 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR800 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1250 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR1100 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1300 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR800 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1300 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 800 GeV stop, for the SR1100 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1350 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR800 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1350 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR1100 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1400 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR800 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1400 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1200 GeV stop, for the SR1100 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1450 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR800 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1450 GeV stop. All limits are computed at 95% CL.
Signal acceptance (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR1100 signal region.
Expected exclusion limit contour in the (BRe,BRtau) plane for a 1500 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR800 signal region.
Observed exclusion limit contour in the (BRe,BRtau) plane for a 1500 GeV stop. All limits are computed at 95% CL.
Signal efficiency (in %) in the (BRe,BRtau) plane for a 1500 GeV stop, for the SR1100 signal region.
$m_{bl}^{0}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^{0}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^\mathrm{asym}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^\mathrm{asym}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$H_\mathrm{T}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$H_\mathrm{T}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{ll}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{ll}$ distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^{1}$(rej) distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
$m_{bl}^{1}$(rej) distribution in SR800. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the background-only fit. The last bin includes overflows.
Full list of event selections and MC generator-weighted yields and efficiencies in the inclusive SR800 and SR1100 signal regions for several signal samples of varying stop mass with decay into b-electron, b-muon or b-tau at 1/3 branching ratio.
Full list of event selections and MC generator-weighted yields and efficiencies in the inclusive SR800 and SR1100 signal regions for several signal samples of varying stop mass with decay into b-electron, b-muon or b-tau at 1/3 branching ratio.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 600 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 700 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 800 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 900 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1000 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1050 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1100 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1150 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1200 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1250 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1300 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1350 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1400 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1450 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1500 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1550 GeV stop. All limits are computed at 95% CL.
Observed exclusion limit in the (BRe,BRtau) plane on the cross section for a 1600 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1350 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1400 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1450 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1500 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1550 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1600 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 600 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 700 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 800 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 900 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1000 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1050 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1100 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1150 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1200 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1250 GeV stop. All limits are computed at 95% CL.
The chosen signal region in the (BRe,BRtau) plane with the best expected exclusion on the cross section for a 1300 GeV stop. All limits are computed at 95% CL.
A search for long-lived, massive particles predicted by many theories beyond the Standard Model is presented. The search targets final states with large missing transverse momentum and at least one high-mass displaced vertex with five or more tracks, and uses 32.8 fb$^{-1}$ of $\sqrt{s}$ = 13 TeV $pp$ collision data collected by the ATLAS detector at the LHC. The observed yield is consistent with the expected background. The results are used to extract 95\% CL exclusion limits on the production of long-lived gluinos with masses up to 2.37 TeV and lifetimes of $\mathcal{O}(10^{-2})$-$\mathcal{O}(10)$ ns in a simplified model inspired by Split Supersymmetry.
Observed cross section upper 95% CL limits as a function of $m_{\tilde{g}}$ and $\tau$ for $m_{\tilde{\chi}_{1}^{0}}=100$ GeV. For the mass limits see the entry of Figure 8b.
Vertex reconstruction efficiency as a function of radial position $R$ with and without the special LRT processing for one $R$-hadron signal sample with $m_{\tilde{g}} = 1.2$ TeV, $m_{\tilde{\chi}_{1}^{0}} = 100$ GeV and $\tau_{\tilde{g}} = 1$ ns. The efficiency is defined as the probability for a true LLP decay to be matched with a reconstructed DV fulfilling the vertex preselection criteria in events with a reconstructed primary vertex.
Vertex reconstruction efficiency as a function of radial position $R$ for two $R$-hadron signal samples with $m_{\tilde{g}} = 1.2$ TeV, $\tau_{\tilde{g}} = 1$ ns and different neutralino masses. The efficiency is defined as the probability for a true LLP decay to be matched with a reconstructed DV fulfilling the vertex preselection criteria in events with a reconstructed primary vertex.
Fractions of selected events for several signal MC samples with a gluino lifetime $\tau = 1$ ns, illustrating how $\mathcal{A}\times\varepsilon$ varies with the model parameters.
Fractions of selected events for several signal MC samples with a mass difference $\Delta m = 100$ GeV, illustrating how $\mathcal{A}\times\varepsilon$ varies with the model parameters.
Two-dimensional distribution of $m_{\mathrm{DV}}$ and track multiplicity for DVs in data events and events of a $R$-hadron signal sample with $m_{\tilde{g}} = 1.4$ TeV, $m_{\tilde{\chi}_{1}^{0}} = 100$ GeV and $\tau_{\tilde{g}} = 1$ ns that satisfy all signal region event selection criteria.
Two-dimensional distribution of $m_{\mathrm{DV}}$ and track multiplicity for DVs in data events and events of a $R$-hadron signal sample with $m_{\tilde{g}} = 1.4$ TeV, $m_{\tilde{\chi}_{1}^{0}} = 1.32$ TeV and $\tau_{\tilde{g}} = 1$ ns that satisfy all signal region event selection criteria.
Upper 95% CL limits on the signal cross section for $m_{\tilde{g}}=1.4$ TeV and fixed $\Delta m=100$ GeV as a function of lifetime $\tau$.
Upper 95% CL limits on the signal cross section for $m_{\tilde{g}}=2.0$ TeV and fixed $\Delta m=100$ GeV as a function of lifetime $\tau$.
Lower 95% CL limit on $m_{\tilde{g}}$ for fixed $\Delta m=100$ GeV as a function of lifetime $\tau$.
Two-dimensional distributions of $x$-$y$ positions of vertices observed in the data passing the vertex pre-selection and satisfying all signal region event-level requirements.
Distribution of the mass $m_{\mathrm{DV}}$ for vertices in data events and in events of five $R$-hadron signal samples with $m_{\tilde{g}} = 1.2$ TeV, $m_{\tilde{\chi}_{1}^{0}} = 100$ GeV and different $\tau_{\tilde{g}}$ that satisfy the signal region event requirements. All DV selections are applied except for the $m_{\mathrm{DV}}$ and track multiplicity requirements.
Distribution of the track multiplicity $n_{\mathrm{Tracks}}$ for vertices in data events and events of five $R$-hadron signal samples with $m_{\tilde{g}} = 1.2$ TeV, $m_{\tilde{\chi}_{1}^{0}} = 100$ GeV and and different $\tau_{\tilde{g}}$ that satisfy the signal region event requirements. All DV selections are applied except for the $m_{\mathrm{DV}}$ and track multiplicity requirements. The track multiplicity distribution requires vertices to have $m_{\mathrm{DV}}>3$ GeV.
Observed cross section upper 95% CL limits as a function of $m_{\tilde{g}}$ and $\tau$ for $\Delta m=100$ GeV. For the mass limits see the entry of Figure 9b.
Observed cross section upper 95% CL limits as a function of $m_{\tilde{\chi}_{1}^{0}}$ and $m_{\tilde{g}}$ for $\tau = 1$ ns. For the mass limits see the entry of Figure 10b.
Parameterized event selection efficiencies as a function of truth MET for events which have all truth decay vertices occurring before the start of the ATLAS calorimeter. Event-level efficiencies are evaluated for events that have truth MET $> 200$ GeV, pass the trackless jet requirement, and have at least one displaced truth decay within the fiducial volume. To satisfy the event-level efficiency, events must then pass the full event selection.
Parameterized event selection efficiencies as a function of truth MET for events which have the furthest truth decay occurring inside the calorimeter. Event-level efficiencies are evaluated for events that have truth MET $> 200$ GeV, pass the trackless jet requirement, and have at least one displaced truth decay within the fiducial volume. To satisfy the event-level efficiency, events must then pass the full event selection.
Parameterized event selection efficiencies as a function of truth MET for events which have the furthest truth decay occurring after the end of the ATLAS calorimeter. Event-level efficiencies are evaluated for events that have truth MET $> 200$ GeV, pass the trackless jet requirement, and have at least one displaced truth decay within the fiducial volume. To satisfy the event-level efficiency, events must then pass the full event selection.
Parameterized vertex level efficiencies as a function of number of particles associated to a truth decay vertex, and the vertex invariant mass for truth decays with $4$ mm $< R_{\mathrm{decay}} < 22$ mm. Selected particles are required to have nonzero electric charge, $p_{T}(|Q|=1) > 1$ GeV, and $d_0 > 2$ mm. The per-vertex efficiency is evaluated only for truth vertices that have at least 5 associated tracks, an invariant mass $> 10$ GeV, and are in the region $4$ mm $< R_{\mathrm{decay}} < 300$ mm, and $|Z_{\mathrm{decay}}| < 300$ mm. A truth vertex satisfies the vertex level efficiency if it can be matched to a reconstructed DV which passes the final vertex selection.
Parameterized vertex level efficiencies as a function of number of particles associated to a truth decay vertex, and the vertex invariant mass for truth decays with $22$ mm $< R_{\mathrm{decay}} < 25$ mm. Selected particles are required to have nonzero electric charge, $p_{T}(|Q|=1) > 1$ GeV, and $d_0 > 2$ mm. The per-vertex efficiency is evaluated only for truth vertices that have at least 5 associated tracks, an invariant mass $> 10$ GeV, and are in the region $4$ mm $< R_{\mathrm{decay}} < 300$ mm, and $|Z_{\mathrm{decay}}| < 300$ mm. A truth vertex satisfies the vertex level efficiency if it can be matched to a reconstructed DV which passes the final vertex selection.
Parameterized vertex level efficiencies as a function of number of particles associated to a truth decay vertex, and the vertex invariant mass for truth decays with $25$ mm $< R_{\mathrm{decay}} < 29$ mm. Selected particles are required to have nonzero electric charge, $p_{T}(|Q|=1) > 1$ GeV, and $d_0 > 2$ mm. The per-vertex efficiency is evaluated only for truth vertices that have at least 5 associated tracks, an invariant mass $> 10$ GeV, and are in the region $4$ mm $< R_{\mathrm{decay}} < 300$ mm, and $|Z_{\mathrm{decay}}| < 300$ mm. A truth vertex satisfies the vertex level efficiency if it can be matched to a reconstructed DV which passes the final vertex selection.
Upper 95% CL limits on the signal cross section for $m_{\tilde{g}}=1.4$ TeV and fixed $m_{\tilde{\chi}_{1}^{0}}=100$ GeV as a function of lifetime $\tau$.
Parameterized vertex level efficiencies as a function of number of particles associated to a truth decay vertex, and the vertex invariant mass for truth decays with $29$ mm $< R_{\mathrm{decay}} < 38$ mm. Selected particles are required to have nonzero electric charge, $p_{T}(|Q|=1) > 1$ GeV, and $d_0 > 2$ mm. The per-vertex efficiency is evaluated only for truth vertices that have at least 5 associated tracks, an invariant mass $> 10$ GeV, and are in the region $4$ mm $< R_{\mathrm{decay}} < 300$ mm, and $|Z_{\mathrm{decay}}| < 300$ mm. A truth vertex satisfies the vertex level efficiency if it can be matched to a reconstructed DV which passes the final vertex selection.
Upper 95% CL limits on the signal cross section for $m_{\tilde{g}}=2.0$ TeV and fixed $m_{\tilde{\chi}_{1}^{0}}=100$ GeV as a function of lifetime $\tau$.
Parameterized vertex level efficiencies as a function of number of particles associated to a truth decay vertex, and the vertex invariant mass for truth decays with $38$ mm $< R_{\mathrm{decay}} < 46$ mm. Selected particles are required to have nonzero electric charge, $p_{T}(|Q|=1) > 1$ GeV, and $d_0 > 2$ mm. The per-vertex efficiency is evaluated only for truth vertices that have at least 5 associated tracks, an invariant mass $> 10$ GeV, and are in the region $4$ mm $< R_{\mathrm{decay}} < 300$ mm, and $|Z_{\mathrm{decay}}| < 300$ mm. A truth vertex satisfies the vertex level efficiency if it can be matched to a reconstructed DV which passes the final vertex selection.
Lower 95% CL limits on $m_{\tilde{g}}$ for fixed $m_{\tilde{\chi}_{1}^{0}}=100$ GeV as a function of lifetime $\tau$.
Parameterized vertex level efficiencies as a function of number of particles associated to a truth decay vertex, and the vertex invariant mass for truth decays with $46$ mm $< R_{\mathrm{decay}} < 73$ mm. Selected particles are required to have nonzero electric charge, $p_{T}(|Q|=1) > 1$ GeV, and $d_0 > 2$ mm. The per-vertex efficiency is evaluated only for truth vertices that have at least 5 associated tracks, an invariant mass $> 10$ GeV, and are in the region $4$ mm $< R_{\mathrm{decay}} < 300$ mm, and $|Z_{\mathrm{decay}}| < 300$ mm. A truth vertex satisfies the vertex level efficiency if it can be matched to a reconstructed DV which passes the final vertex selection.
Parameterized vertex level efficiencies as a function of number of particles associated to a truth decay vertex, and the vertex invariant mass for truth decays with $73$ mm $< R_{\mathrm{decay}} < 84$ mm. Selected particles are required to have nonzero electric charge, $p_{T}(|Q|=1) > 1$ GeV, and $d_0 > 2$ mm. The per-vertex efficiency is evaluated only for truth vertices that have at least 5 associated tracks, an invariant mass $> 10$ GeV, and are in the region $4$ mm $< R_{\mathrm{decay}} < 300$ mm, and $|Z_{\mathrm{decay}}| < 300$ mm. A truth vertex satisfies the vertex level efficiency if it can be matched to a reconstructed DV which passes the final vertex selection.
Parameterized vertex level efficiencies as a function of number of particles associated to a truth decay vertex, and the vertex invariant mass for truth decays with $84$ mm $< R_{\mathrm{decay}} < 111$ mm. Selected particles are required to have nonzero electric charge, $p_{T}(|Q|=1) > 1$ GeV, and $d_0 > 2$ mm. The per-vertex efficiency is evaluated only for truth vertices that have at least 5 associated tracks, an invariant mass $> 10$ GeV, and are in the region $4$ mm $< R_{\mathrm{decay}} < 300$ mm, and $|Z_{\mathrm{decay}}| < 300$ mm. A truth vertex satisfies the vertex level efficiency if it can be matched to a reconstructed DV which passes the final vertex selection.
Parameterized vertex level efficiencies as a function of number of particles associated to a truth decay vertex, and the vertex invariant mass for truth decays with $111$ mm $< R_{\mathrm{decay}} < 120$ mm. Selected particles are required to have nonzero electric charge, $p_{T}(|Q|=1) > 1$ GeV, and $d_0 > 2$ mm. The per-vertex efficiency is evaluated only for truth vertices that have at least 5 associated tracks, an invariant mass $> 10$ GeV, and are in the region $4$ mm $< R_{\mathrm{decay}} < 300$ mm, and $|Z_{\mathrm{decay}}| < 300$ mm. A truth vertex satisfies the vertex level efficiency if it can be matched to a reconstructed DV which passes the final vertex selection.
Upper 95% CL limits on the signal cross section for $m_{\tilde{g}}=1.4$ TeV and fixed $\tau=1$ ns as a function of $m_{\tilde{\chi}_{1}^{0}}$.
Parameterized vertex level efficiencies as a function of number of particles associated to a truth decay vertex, and the vertex invariant mass for truth decays with $120$ mm $< R_{\mathrm{decay}} < 145$ mm. Selected particles are required to have nonzero electric charge, $p_{T}(|Q|=1) > 1$ GeV, and $d_0 > 2$ mm. The per-vertex efficiency is evaluated only for truth vertices that have at least 5 associated tracks, an invariant mass $> 10$ GeV, and are in the region $4$ mm $< R_{\mathrm{decay}} < 300$ mm, and $|Z_{\mathrm{decay}}| < 300$ mm. A truth vertex satisfies the vertex level efficiency if it can be matched to a reconstructed DV which passes the final vertex selection.
Upper 95% CL limits on the signal cross section for $m_{\tilde{g}}=2.0$ TeV and fixed $\tau=1$ ns as a function of $m_{\tilde{\chi}_{1}^{0}}$.
Parameterized vertex level efficiencies as a function of number of particles associated to a truth decay vertex, and the vertex invariant mass for truth decays with $145$ mm $< R_{\mathrm{decay}} < 180$ mm. Selected particles are required to have nonzero electric charge, $p_{T}(|Q|=1) > 1$ GeV, and $d_0 > 2$ mm. The per-vertex efficiency is evaluated only for truth vertices that have at least 5 associated tracks, an invariant mass $> 10$ GeV, and are in the region $4$ mm $< R_{\mathrm{decay}} < 300$ mm, and $|Z_{\mathrm{decay}}| < 300$ mm. A truth vertex satisfies the vertex level efficiency if it can be matched to a reconstructed DV which passes the final vertex selection.
Observed 95% CL limit as a function of $m_{\tilde{g}}$ and $m_{\tilde{\chi}_{1}^{0}}$ for fixed $\tau=1$ ns.
Parameterized vertex level efficiencies as a function of number of particles associated to a truth decay vertex, and the vertex invariant mass for truth decays with $180$ mm $< R_{\mathrm{decay}} < 300$ mm. Selected particles are required to have nonzero electric charge, $p_{T}(|Q|=1) > 1$ GeV, and $d_0 > 2$ mm. The per-vertex efficiency is evaluated only for truth vertices that have at least 5 associated tracks, an invariant mass $> 10$ GeV, and are in the region $4$ mm $< R_{\mathrm{decay}} < 300$ mm, and $|Z_{\mathrm{decay}}| < 300$ mm. A truth vertex satisfies the vertex level efficiency if it can be matched to a reconstructed DV which passes the final vertex selection.
A search for pair production of a scalar partner of the top quark in events with four or more jets plus missing transverse momentum is presented. An analysis of 36.1 fb$^{-1}$ of $\sqrt{s}$=13 TeV proton-proton collisions collected using the ATLAS detector at the LHC yields no significant excess over the expected Standard Model background. To interpret the results a simplified supersymmetric model is used where the top squark is assumed to decay via $\tilde{t}_1 \rightarrow t^{(*)} \tilde\chi^0_1$ and $\tilde{t}_1\rightarrow b\tilde\chi^\pm_1 \rightarrow b W^{(*)} \tilde\chi^0_1$, where $\tilde\chi^0_1$ ($\chi^\pm_1$) denotes the lightest neutralino (chargino). Exclusion limits are placed in terms of the top-squark and neutralino masses. Assuming a branching ratio of 100% to $t \tilde\chi^0_1$, top-squark masses in the range 450-950 GeV are excluded for $\tilde\chi^0_1$ masses below 160 GeV. In the case where $m_{\tilde{t}_1}\sim m_t+m_{\tilde\chi^0_1}$, top-squark masses in the range 235-590 GeV are excluded.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{t}_1,\tilde\chi^{\pm}_1)=$ (800,100) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (800,100) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{t}_1,\tilde\chi^{\pm}_1)=$ (600,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (600,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
A search for the supersymmetric partners of the Standard Model bottom and top quarks is presented. The search uses 36.1 fb$^{-1}$ of $pp$ collision data at $\sqrt{s}=13$ TeV collected by the ATLAS experiment at the Large Hadron Collider. Direct production of pairs of bottom and top squarks ($\tilde{b}_{1}$ and $\tilde{t}_{1}$) is searched for in final states with $b$-tagged jets and missing transverse momentum. Distinctive selections are defined with either no charged leptons (electrons or muons) in the final state, or one charged lepton. The zero-lepton selection targets models in which the $\tilde{b}_{1}$ is the lightest squark and decays via $\tilde{b}_{1} \rightarrow b \tilde{\chi}^{0}_{1}$, where $\tilde{\chi}^{0}_{1}$ is the lightest neutralino. The one-lepton final state targets models where bottom or top squarks are produced and can decay into multiple channels, $\tilde{b}_{1} \rightarrow b \tilde{\chi}^{0}_{1}$ and $\tilde{b}_{1} \rightarrow t \tilde{\chi}^{\pm}_{1}$, or $\tilde{t}_{1} \rightarrow t \tilde{\chi}^{0}_{1}$ and $\tilde{t}_{1} \rightarrow b \tilde{\chi}^{\pm}_{1}$, where $\tilde{\chi}^{\pm}_{1}$ is the lightest chargino and the mass difference $m_{\tilde{\chi}^{\pm}_{1}}- m_{\tilde{\chi}^{0}_{1}}$ is set to 1 GeV. No excess above the expected Standard Model background is observed. Exclusion limits at 95\% confidence level on the mass of third-generation squarks are derived in various supersymmetry-inspired simplified models.
- - - - - - - - - - - - - - - - - - - - <br/><b>Acceptance:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=Acceptance1">b0L-SRA350</a> <a href="79165?version=1&table=Acceptance2">b0L-SRA450</a> <a href="79165?version=1&table=Acceptance3">b0L-SRA550</a> <a href="79165?version=1&table=Acceptance4">b0L-SRB</a> <a href="79165?version=1&table=Acceptance5">b0L-SRC</a> <a href="79165?version=1&table=Acceptance6">b0L-best</a><br/><i>asymmetric:</i> <a href="79165?version=1&table=Acceptance7">b1L-SRA300-2j</a> <a href="79165?version=1&table=Acceptance8">b1L-SRA450</a> <a href="79165?version=1&table=Acceptance9">b1L-SRA600</a> <a href="79165?version=1&table=Acceptance10">b1L-SRA750</a> <a href="79165?version=1&table=Acceptance11">b1L-SRB</a> <a href="79165?version=1&table=Acceptance12">b1L-best</a><br/><br/><b>Efficiency:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=Efficiency1">b0L-SRA350</a> <a href="79165?version=1&table=Efficiency2">b0L-SRA450</a> <a href="79165?version=1&table=Efficiency3">b0L-SRA550</a> <a href="79165?version=1&table=Efficiency4">b0L-SRB</a> <a href="79165?version=1&table=Efficiency5">b0L-SRC</a> <a href="79165?version=1&table=Efficiency6">b0L-best</a><br/><i>asymmetric:</i> <a href="79165?version=1&table=Efficiency7">b1L-SRA300-2j</a> <a href="79165?version=1&table=Efficiency8">b1L-SRA450</a> <a href="79165?version=1&table=Efficiency9">b1L-SRA600</a> <a href="79165?version=1&table=Efficiency10">b1L-SRA750</a> <a href="79165?version=1&table=Efficiency11">b1L-SRB</a> <a href="79165?version=1&table=Efficiency12">b1L-best</a><br/><br/><b>Best SR Mapping:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=BestSR4">b0L</a><br/><i>asymmetric:</i> <a href="79165?version=1&table=BestSR1">b1L</a> <a href="79165?version=1&table=BestSR2">b0L</a> <a href="79165?version=1&table=BestSR3">combined</a><br/><br/><b>Exclusion Contour:</b><br/><i>symmetric:</i> b0L-SRA350 <a href="79165?version=1&table=Contour1">exp</a> <a href="79165?version=1&table=Contour2">obs</a> b0L-SRA450 <a href="79165?version=1&table=Contour5">exp</a> <a href="79165?version=1&table=Contour6">obs</a> b0L-SRA550 <a href="79165?version=1&table=Contour9">exp</a> <a href="79165?version=1&table=Contour10">obs</a> b0L-SRB <a href="79165?version=1&table=Contour11">exp</a> <a href="79165?version=1&table=Contour12">obs</a> b0L-SRC <a href="79165?version=1&table=Contour15">exp</a> <a href="79165?version=1&table=Contour16">obs</a> b0L-best <a href="79165?version=1&table=Contour17">exp</a> <a href="79165?version=1&table=Contour18">obs</a><br/><i>asymmetric:</i> b0L-SRA350 <a href="79165?version=1&table=Contour3">exp</a> <a href="79165?version=1&table=Contour4">obs</a> b0L-SRA450 <a href="79165?version=1&table=Contour7">exp</a> <a href="79165?version=1&table=Contour8">obs</a> b0L-SRB <a href="79165?version=1&table=Contour13">exp</a> <a href="79165?version=1&table=Contour14">obs</a> b0L-best <a href="79165?version=1&table=Contour19">exp</a> <a href="79165?version=1&table=Contour20">obs</a> b1L-SRA300-2j <a href="79165?version=1&table=Contour21">exp</a> <a href="79165?version=1&table=Contour22">obs</a> b1L-SRA450 <a href="79165?version=1&table=Contour23">exp</a> <a href="79165?version=1&table=Contour24">obs</a> b1L-SRA600 <a href="79165?version=1&table=Contour25">exp</a> <a href="79165?version=1&table=Contour26">obs</a> b1L-SRA750 <a href="79165?version=1&table=Contour27">exp</a> <a href="79165?version=1&table=Contour28">obs</a> b1L-SRB <a href="79165?version=1&table=Contour29">exp</a> <a href="79165?version=1&table=Contour30">obs</a> b1L-best <a href="79165?version=1&table=Contour31">exp</a> <a href="79165?version=1&table=Contour32">obs</a> A-LowMass <a href="79165?version=1&table=Contour33">exp</a> <a href="79165?version=1&table=Contour34">obs</a> A-HighMass <a href="79165?version=1&table=Contour35">exp</a> <a href="79165?version=1&table=Contour36">obs</a> B combination <a href="79165?version=1&table=Contour37">exp</a> <a href="79165?version=1&table=Contour38">obs</a> Best combination <a href="79165?version=1&table=Contour39">exp</a> <a href="79165?version=1&table=Contour40">obs</a><br/><br/><b>SR Distribution:</b><br/><a href="79165?version=1&table=SRdistribution1">b0L-SRA</a>: $m_{\mathrm{CT}}$ <a href="79165?version=1&table=SRdistribution2">b0L-SRB</a>: $\mathrm{min[m_{T}(jet_{1-4}, E_{T}^{miss})]}$ <a href="79165?version=1&table=SRdistribution3">b0L-SRC</a>: ${\cal A}$ <a href="79165?version=1&table=SRdistribution4">b1L-SRA300-2j</a>: $\mathrm{m_{bb}}$ <a href="79165?version=1&table=SRdistribution5">b1L-SRA</a>: $\mathrm{m_{eff}}$ <a href="79165?version=1&table=SRdistribution6">b1L-SRB</a>: $\mathrm{m_{T}}$<br/><br/><b>Cross section upper limit:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=Limitoncrosssection1">b0L-best</a> <a href="79165?version=1&table=Limitoncrosssection2">b0L-SRA350</a> <a href="79165?version=1&table=Limitoncrosssection3">b0L-SRA450</a> <a href="79165?version=1&table=Limitoncrosssection4">b0L-SRA550</a> <a href="79165?version=1&table=Limitoncrosssection5">b0L-SRB</a> <a href="79165?version=1&table=Limitoncrosssection6">b0L-SRC</a><br/><i>asymmetric:</i> <a href="79165?version=1&table=Limitoncrosssection7">b0L-best</a> <a href="79165?version=1&table=Limitoncrosssection8">b0L-SRA350</a> <a href="79165?version=1&table=Limitoncrosssection9">b0L-SRA450</a> <a href="79165?version=1&table=Limitoncrosssection10">b0L-SRB</a> <a href="79165?version=1&table=Limitoncrosssection11">b1L-best</a> <a href="79165?version=1&table=Limitoncrosssection12">b1L-SRA300-2j</a> <a href="79165?version=1&table=Limitoncrosssection13">b1L-SRA450</a> <a href="79165?version=1&table=Limitoncrosssection14">b1L-SRA600</a> <a href="79165?version=1&table=Limitoncrosssection15">b1L-SRA750</a> <a href="79165?version=1&table=Limitoncrosssection16">b1L-SRB</a> <a href="79165?version=1&table=Limitoncrosssection17">best combination</a> <a href="79165?version=1&table=Limitoncrosssection18">A-LowMass</a> <a href="79165?version=1&table=Limitoncrosssection19">A-HighMass</a> <a href="79165?version=1&table=Limitoncrosssection20">B combination</a><br/><br/><b>Cutflow:</b><br/><i>symmetric:</i> <a href="79165?version=1&table=CutflowTable1">b0L-SRA (1 TeV, 1 GeV)</a> <a href="79165?version=1&table=CutflowTable2">b0L-SRB (700 GeV, 450 GeV)</a> <a href="79165?version=1&table=CutflowTable3">b0L-SRC (450 GeV, 430 GeV)</a><br/><i>mixed:</i> <a href="79165?version=1&table=CutflowTable4">b1L-SRA (700 GeV, 300 GeV)</a> <a href="79165?version=1&table=CutflowTable5">b1L-SRA300-2j (700 GeV, 300 GeV)</a> <a href="79165?version=1&table=CutflowTable6">b0L-SRA (700 GeV, 300 GeV)</a><br/><br/><b>Truth Code</b> and <b>SLHA Files</b> for the cutflows are available under "Resources" (purple button on the left)
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA350 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA450 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA550 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRB signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRC signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L- best expected signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA300-2j signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA450 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA600 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA750 signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRB signal region.
Signal acceptance (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L- best expected signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA350 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA450 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRA550 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRB signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L-SRC signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino, for the b0L- best expected signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA300-2j signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA450 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA600 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRA750 signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L-SRB signal region.
Signal efficiency (in %) in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino, for the b1L- best expected signal region.
b1L signal region with best expected exclusion limit in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino.
b0L signal region with best expected exclusion limit in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino.
combined signal region with best expected exclusion limit in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the asymmetric decay of the sbottom into bottom quark and neutralino or top quark and chargino.
b0L signal region with best expected exclusion limit in the ( M(SBOTTOM), M(NEUTRALINO) ) mass plane for the symmetric decay of the sbottom into bottom quark and neutralino.
Expected exclusion limit for b0L-SRA350 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRA350 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRA350 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b0L-SRA350 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRA450 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRA450 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRA450 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b0L-SRA450 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b0L-SRA550 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRA550 for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRB for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRB for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for b0L-SRB for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b0L-SRB for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b0L-SRC for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for b0L-SRC for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for best b0L SR for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Observed exclusion limit for best b0L SR for sbottom pair production with symmetric decay into a bottom quark and a neutralino.
Expected exclusion limit for best b0L SR for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for best b0L SR for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRA300-2j for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRA300-2j for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRA450 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRA450 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRA600 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRA600 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRA750 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRA750 for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for b1L-SRB for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for b1L-SRB for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for best b1L SR for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for best b1L SR for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for A-LowMass combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for A-LowMass combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for A-HighMass combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for A-HighMass combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for B combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for B combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Expected exclusion limit for best combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
Observed exclusion limit for best combination for sbottom pair production with asymmetric decay into a bottom quark and a neutralino or a top quark and a chargino.
$m_{\mathrm{CT}}$ distribution in b0L-SRA. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$\mathrm{min[m_{T}(jet_{1-4}, E_{T}^{miss})]}$ distribution in b0L-SRB. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
${\cal A}$ distribution in b0L-SRC. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$\mathrm{m_{bb}}$ distribution in b1L-SRA300-2j. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$\mathrm{m_{eff}}$ distribution in b1L-SRA. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
$\mathrm{m_{T}}$ distribution in b1L-SRB. All selection criteria are applied, except the selection on the variable that is displayed in the plot. The SM backgrounds are normalized to the values determined in the fit. The last bin includes overflows.
Cross section excluded at 95% CL for best b0L SR as a function of the sbottom and neutralino masses, for a pair produced sbottom with symmetric decay into a bottom and a neutralino.
Cross section excluded at 95% CL for b0L-SRA350 as a function of the sbottom and neutralino masses, for a pair produced sbottom with symmetric decay into a bottom and a neutralino.
Cross section excluded at 95% CL for b0L-SRA450 as a function of the sbottom and neutralino masses, for a pair produced sbottom with symmetric decay into a bottom and a neutralino.
Cross section excluded at 95% CL for b0L-SRA550 as a function of the sbottom and neutralino masses, for a pair produced sbottom with symmetric decay into a bottom and a neutralino.
Cross section excluded at 95% CL for b0L-SRB as a function of the sbottom and neutralino masses, for a pair produced sbottom with symmetric decay into a bottom and a neutralino.
Cross section excluded at 95% CL for b0L-SRC as a function of the sbottom and neutralino masses, for a pair produced sbottom with symmetric decay into a bottom and a neutralino.
Cross section excluded at 95% CL for best b0L SR as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b0L-SRA350 as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b0L-SRA450 as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b0L-SRB as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for best b1L SR as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b1L-SRA300-2j as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b1L-SRA450 as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b1L-SRA600 as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b1L-SRA750 as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for b1L-SRB as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for best combination as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for A-LowMass combination as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for A-HighMass combination as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cross section excluded at 95% CL for B combination as a function of the sbottom and neutralino masses, for a pair produced sbottom with asymmetric decay into a bottom and a neutralino or a top and a chargino.
Cutflow table in b0L-SRA for a pair produced bottom squark of 1 TeV decaying into a 1 GeV neutralino in a symmetric decay scenario.
Cutflow table in b0L-SRB for a pair produced bottom squark of 700 GeV decaying into a 450 GeV neutralino in a symmetric decay scenario.
Cutflow table in b0L-SRC for a pair produced bottom squark of 450 GeV decaying into a 430 GeV neutralino in a symmetric decay scenario.
Cutflow table in b1L-SRA for a pair produced bottom squark of 700 GeV decaying into a 300 GeV neutralino in a mixed decay scenario.
Cutflow table in b1L-SRA300-2j for a pair produced bottom squark of 700 GeV decaying into a 300 GeV neutralino in a mixed decay scenario.
Cutflow table in b0L-SRA for a pair produced bottom squark of 700 GeV decaying into a 300 GeV neutralino in a mixed decay scenario.
A search for physics beyond the standard model in final states with at least one photon, large transverse momentum imbalance, and large total transverse event activity is presented. Such topologies can be produced in gauge-mediated supersymmetry models in which pair-produced gluinos or squarks decay to photons and gravitinos via short-lived neutralinos. The data sample corresponds to an integrated luminosity of 35.9 inverse femtobarns of proton-proton collisions at sqrt(s) = 13 TeV recorded by the CMS experiment at the LHC in 2016. No significant excess of events above the expected standard model background is observed. The data are interpreted in simplified models of gluino and squark pair production, in which gluinos or squarks decay via neutralinos to photons. Gluino masses of up to 1.50-2.00 TeV and squark masses up to 1.30-1.65 TeV are excluded at 95% confidence level, depending on the neutralino mass and branching fraction.
Results are reported from a search for supersymmetric particles in proton-proton collisions in the final state with a single lepton; multiple jets, including at least one b-tagged jet; and large missing transverse momentum. The search uses a sample of proton-proton collision data at sqrt(s) = 13 TeV recorded by the CMS experiment at the LHC, corresponding to an integrated luminosity of 35.9 inverse femtobarns. The observed event yields in the signal regions are consistent with those expected from standard model backgrounds. The results are interpreted in the context of simplified models of supersymmetry involving gluino pair production, with gluino decay into either on- or off-mass-shell top squarks. Assuming that the top squarks decay into a top quark plus a stable, weakly interacting neutralino, scenarios with gluino masses up to about 1.9 TeV are excluded at 95% confidence level for neutralino masses up to about 1 TeV.
Figure 2. Cross section upper limit (95% CL) on T1tttt cross section
Figure 2. Excluded gluino and neutralino masses at 95% CL for the T1tttt.
Figure 2. +1 sigma excluded gluino and neutralino masses at 95% CL for the T1tttt.
Figure 2. -1 sigma excluded gluino and neutralino masses at 95% CL for the T1tttt.
Figure 2. Expected exclusion for the T1tttt model.
Figure 2. +1 sigma expected exclusion for the T1tttt model.
Figure 2. -1 sigma expected exclusion for the T1tttt model.
Figure 2. Excluded gluino and neutralino masses at 95% CL for the T5tttt.
Figure 2. Expected exclusion for the T5tttt model.
Table 1. Observed event yields and mean background yields from the predictive fit in the 18 bins of the signal region R4.
Table 2. Observed event yields and mean background yields from the predictive fit in four aggregate search bins.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But, sometimes you may wish to be more specific. Here we show you how.
Guidance and examples on the query string syntax can be found in the Elasticsearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status
Email
Forum
Twitter
GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.