Showing 10 of 148 results
A novel search for exotic decays of the Higgs boson into pairs of long-lived neutral particles, each decaying into a bottom quark pair, is performed using 139 fb$^{-1}$ of $\sqrt{s} = 13$ TeV proton-proton collision data collected with the ATLAS detector at the LHC. Events consistent with the production of a Higgs boson in association with a leptonically decaying $Z$ boson are analysed. Long-lived particle (LLP) decays are reconstructed from inner-detector tracks as displaced vertices with high mass and track multiplicity relative to Standard Model processes. The analysis selection requires the presence of at least two displaced vertices, effectively suppressing Standard Model backgrounds. The residual background contribution is estimated using a data-driven technique. No excess over Standard Model predictions is observed, and upper limits are set on the branching ratio of the Higgs boson to LLPs. Branching ratios above 10% are excluded at 95% confidence level for LLP mean proper lifetimes $c\tau$ as small as 4 mm and as large as 100 mm. For LLP masses below 40 GeV, these results represent the most stringent constraint in this lifetime regime.
95% CL exclusion limits on $\mathcal{B}(H\rightarrow aa \rightarrow b\bar{b}b\bar{b})$ for $m_a = 16$ GeV.
95% CL exclusion limits on $\mathcal{B}(H\rightarrow aa \rightarrow b\bar{b}b\bar{b})$ for $m_a = 25$ GeV.
95% CL exclusion limits on $\mathcal{B}(H\rightarrow aa \rightarrow b\bar{b}b\bar{b})$ for $m_a = 35$ GeV.
95% CL exclusion limits on $\mathcal{B}(H\rightarrow aa \rightarrow b\bar{b}b\bar{b})$ for $m_a = 45$ GeV.
95% CL exclusion limits on $\mathcal{B}(H\rightarrow aa \rightarrow b\bar{b}b\bar{b})$ for $m_a = 55$ GeV.
The fraction of $a$ boson decays matched to reconstructed displaced vertices passing all vertex selections in signal MC.
The extrapolated signal selection efficiency as a function of $c\tau_{a}$.
A measurement of four-top-quark production using proton-proton collision data at a centre-of-mass energy of 13 TeV collected by the ATLAS detector at the Large Hadron Collider corresponding to an integrated luminosity of 139 fb$^{-1}$ is presented. Events are selected if they contain a single lepton (electron or muon) or an opposite-sign lepton pair, in association with multiple jets. The events are categorised according to the number of jets and how likely these are to contain $b$-hadrons. A multivariate technique is then used to discriminate between signal and background events. The measured four-top-quark production cross section is found to be 26$^{+17}_{-15}$ fb, with a corresponding observed (expected) significance of 1.9 (1.0) standard deviations over the background-only hypothesis. The result is combined with the previous measurement performed by the ATLAS Collaboration in the multilepton final state. The combined four-top-quark production cross section is measured to be 24$^{+7}_{-6}$ fb, with a corresponding observed (expected) signal significance of 4.7 (2.6) standard deviations over the background-only predictions. It is consistent within 2.0 standard deviations with the Standard Model expectation of 12.0$\pm$2.4 fb.
The results of the fitted signal strength $\mu$ in the 1L/2LOS channel
The results of fitted inclusive ${t\bar{t}t\bar{t}}$ cross-section in the 1L/2LOS channel
Ranking of the nuisance parameters included in the fit according to their impact on the signal strength $\mu$. The impact of each nuisance parameter, $\Delta\mu$, is computed by comparing the nominal best-fit value of $\mu$ with the result of the fit when fixing the nuisance parameter to its best-fit value, $\hat{\theta}$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta\theta$ ($\pm \Delta\hat{\theta}$).
The contribution from different systematic uncertainties to the measured $t\bar{t}t\bar{t}$ production cross section, grouped in categories.
The results of the fitted signal strength $\mu$ in the 1L/2LOS and 2LSS/3L combined channel.
The results of fitted inclusive ${t\bar{t}t\bar{t}}$ cross-section in the 1L/2LOS and 2LSS/3L combined channel.
Comparison between data and prediction for the distribution of the sum of the pseudo-continuous b-tagging score over the six jets with the highest score in the 1L,$\geq$9j,$\geq$3b region before the fit.
Comparison between data and prediction for the distribution of the sum of the pseudo-continuous b-tagging score over the six jets with the highest score in the 1L,$\geq$9j,$\geq$3b region after the fit.
Comparison between data and prediction for the distribution of the sum of the pseudo-continuous b-tagging score over the six jets with the highest score in the 2LOS,$\geq$7j,$\geq$3b region before the fit.
Comparison between data and prediction for the distribution of the sum of the pseudo-continuous b-tagging score over the six jets with the highest score in the 2LOS,$\geq$7j,$\geq$3b region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,$\geq$8j,$\geq$3b region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,$\geq$8j,$\geq$3b region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,$\geq$6j,$\geq$3b region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,$\geq$6j,$\geq$3b region after the fit.
Comparison between data and prediction for the distribution of number of jets in the 1L,$\geq$8j,$\geq$3b region before the fit.
Comparison between data and prediction for the distribution of number of jets in the 1L,$\geq$8j,$\geq$3b region after the fit.
Comparison between data and prediction for the distribution of number of jets in the 2LOS,$\geq$6j,$\geq$3b region before the fit.
Comparison between data and prediction for the distribution of number of jets in the 2LOS,$\geq$6j,$\geq$3b region after the fit.
Comparison between data and prediction for the distribution of b-jets multiplicity in the 1L,$\geq$8j,$\geq$3b region before the fit.
Comparison between data and prediction for the distribution of b-jets multiplicity in the 1L,$\geq$8j,$\geq$3b region after the fit.
Comparison between data and prediction for the distribution of b-jets multiplicity in the 2LOS,$\geq$6j,$\geq$3b region before the fit.
Comparison between data and prediction for the distribution of b-jets multiplicity in the 2LOS,$\geq$6j,$\geq$3b region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,9j,4b signal region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,9j,4b signal region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,9j,$\geq$5b signal region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,9j,$\geq$5b signal region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,3bL signal region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,3bL signal region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,3bH signal region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,3bH signal region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,4b signal region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,4b signal region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,$\geq$5b signal region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,$\geq$5b signal region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 2LOS,7j,$\geq$4b signal region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 2LOS,7j,$\geq$4b signal region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,3bL signal region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,3bL signal region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,3bH signal region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,3bH signal region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,$\geq$4b signal region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,$\geq$4b signal region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,3bV validation region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,3bV validation region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,9j,3bV validation region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,9j,3bV validation region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,3bV validation region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 1L,$\geq$10j,3bV validation region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,3bV validation region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,3bV validation region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 2LOS,7j,3bV validation region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 2LOS,7j,3bV validation region after the fit.
Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,3bV validation region before the fit.
Comparison between data and prediction for the distribution of the BDT score in the 2LOS,$\geq$8j,3bV validation region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,3bL control region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,3bL control region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,3bH control region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,3bH control region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,9j,3bL control region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,9j,3bL control region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,9j,3bH control region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,9j,3bH control region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,4b control region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,4b control region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,$\geq$5b control region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 1L,8j,$\geq$5b control region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,3bL control region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,3bL control region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,3bH control region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,3bH control region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,7j,3bL control region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,7j,3bL control region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,7j,3bH control region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,7j,3bH control region after the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,$\geq$4b control region before the fit.
Comparison between data and prediction for the distribution of the scalar sum of all jet and lepton pT in the event in the 2LOS,6j,$\geq$4b control region after the fit.
A search for R-parity violating supersymmetry in final states characterised by high jet multiplicity, at least one isolated light lepton and either zero or at least three $b$-tagged jets is presented. The search uses 139 fb$^{-1}$ of $\sqrt{s} = 13$ TeV proton-proton collision data collected by the ATLAS experiment during Run 2 of the Large Hadron Collider. The results are interpreted in the context of R-parity-violating supersymmetry models that feature gluino production, top-squark production, or electroweakino production. The dominant sources of background are estimated using a data-driven model, based on observables at medium jet multiplicity, to predict the $b$-tagged jet multiplicity distribution at the higher jet multiplicities used in the search. Machine learning techniques are used to reach sensitivity to electroweakino production, extending the data-driven background estimation to the shape of the machine learning discriminant. No significant excess over the Standard Model expectation is observed and exclusion limits at the 95% confidence-level are extracted, reaching as high as 2.4 TeV in gluino mass, 1.35 TeV in top-squark mass, and 320 (365) GeV in higgsino (wino) mass.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $1\ell$ category for 4 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $1\ell$ category for 5 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $1\ell$ category for 6 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $1\ell$ category for 7 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $1\ell$ category for 8 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $1\ell$ category for 9 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $1\ell$ category for 10 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $1\ell$ category for 11 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $1\ell$ category for 12 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $1\ell$ category for 13 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $1\ell$ category for 14 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $1\ell$ category for at least 15 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $2\ell^{\mathrm{sc}}$ category for 4 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $2\ell^{\mathrm{sc}}$ category for 5 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $2\ell^{\mathrm{sc}}$ category for 6 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $2\ell^{\mathrm{sc}}$ category for 7 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $2\ell^{\mathrm{sc}}$ category for 8 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $2\ell^{\mathrm{sc}}$ category for 9 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold regions defined for the EWK analysis in the $2\ell^{\mathrm{sc}}$ category for at least 10 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold region in the $1\ell$ category for at least 15 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 40 GeV jet $p_{\mathrm{T}}$ threshold region in the $1\ell$ category for at least 12 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 60 GeV jet $p_{\mathrm{T}}$ threshold region in the $1\ell$ category for at least 11 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 80 GeV jet $p_{\mathrm{T}}$ threshold region in the $1\ell$ category for at least 10 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 100 GeV jet $p_{\mathrm{T}}$ threshold region in the $1\ell$ category for at least 8 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 20 GeV jet $p_{\mathrm{T}}$ threshold region in the $2\ell^{\mathrm{sc}}$ category for at least 10 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 40 GeV jet $p_{\mathrm{T}}$ threshold region in the $2\ell^{\mathrm{sc}}$ category for at least 8 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 60 GeV jet $p_{\mathrm{T}}$ threshold region in the $2\ell^{\mathrm{sc}}$ category for at least 7 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 80 GeV jet $p_{\mathrm{T}}$ threshold region in the $2\ell^{\mathrm{sc}}$ category for at least 7 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
The observed data event yields and the corresponding estimates for the backgrounds in the different $b$-jet multiplicity bins for the 100 GeV jet $p_{\mathrm{T}}$ threshold region in the $2\ell^{\mathrm{sc}}$ category for at least 6 jets. The background is estimated by including all bins in the fit. All uncertainties, which may be correlated across the bins, are included in the total background uncertainty.
Data event yields compared with the expected contributions from relevant background sources, in the discovery signal regions defined for the $1\ell$ category, as well as the observed and expected 95% CL model-independent upper limits on product of cross-section, acceptance and efficiency (in fb). The parameters of the model are determined in a fit to a reduced set of bins, corresponding to the model-independent fit discussed in the text.
Data event yields compared with the expected contributions from relevant background sources, in the discovery signal regions defined for the $2\ell^{\mathrm{sc}}$ category, as well as the observed and expected 95% CL model-independent upper limits on product of cross-section, acceptance and efficiency (in fb). The parameters of the model are determined in a fit to a reduced set of bins, corresponding to the model-independent fit discussed in the text.
Expected 95% CL exclusion contour for the gluino $\tilde{g}\rightarrow q\bar{q}\tilde{\chi}^0_1\rightarrow q\bar{q}q\bar{q} \ell\nu$ model.
Observed 95% CL exclusion contour for the gluino $\tilde{g}\rightarrow q\bar{q}\tilde{\chi}^0_1\rightarrow q\bar{q}q\bar{q} \ell\nu$ model.
Expected 95% CL exclusion contour for the gluino $\tilde{g}\rightarrow \bar{t}\tilde{t} \rightarrow \bar{t}\bar{b}\bar{s}$ model.
Observed 95% CL exclusion contour for the gluino $\tilde{g}\rightarrow \bar{t}\tilde{t} \rightarrow \bar{t}\bar{b}\bar{s}$ model.
Expected 95% CL exclusion contour for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with bino LSP.
Observed 95% CL exclusion contour for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with bino LSP.
Expected 95% CL exclusion contour for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with higgsino LSP.
Observed 95% CL exclusion contour for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with higgsino LSP.
Expected 95% CL exclusion contour for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with wino LSP.
Observed 95% CL exclusion contour for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with wino LSP.
Expected 95% CL exclusion contour for the stop pair production model with bino LSP.
Observed 95% CL exclusion contour for the stop pair production model with bino LSP.
Expected 95% CL exclusion contour for the stop pair production model with higgsino LSP.
Observed 95% CL exclusion contour for the stop pair production model with higgsino LSP.
Expected 95% CL exclusion contour for the stop pair production model with wino LSP.
Observed 95% CL exclusion contour for the stop pair production model with wino LSP.
Expected 95% CL excluded cross section for the RPV model with electroweakino prodiction with higgsino LSP hypothesis.
Observed 95% CL excluded cross section for the RPV model with electroweakino prodiction with higgsino LSP hypothesis.
Expected 95% CL excluded cross section for the RPV model with electroweakino prodiction with wino LSP hypothesis.
Observed 95% CL excluded cross section for the RPV model with electroweakino prodiction with wino LSP hypothesis.
Data event yields compared with the expected contributions from relevant background sources, in the discovery signal regions defined for the $1\ell$ category with 20 and 40 GeV jet $p_{\mathrm{T}}$ thresholds. The uncertainties across backgrounds can exhibit strong anticorrelations.
Data event yields compared with the expected contributions from relevant background sources, in the discovery signal regions defined for the $1\ell$ category with 60, 80 and 100 GeV jet $p_{\mathrm{T}}$ thresholds. The uncertainties across backgrounds can exhibit strong anticorrelations.
Data event yields compared with the expected contributions from relevant background sources, in the discovery signal regions defined for the $2\ell^{\mathrm{sc}}$ category with 20 and 40 GeV jet $p_{\mathrm{T}}$ thresholds. The uncertainties across backgrounds can exhibit strong anticorrelations.
Data event yields compared with the expected contributions from relevant background sources, in the discovery signal regions defined for the $2\ell^{\mathrm{sc}}$ category with 60, 80 and 100 GeV jet $p_{\mathrm{T}}$ thresholds. The uncertainties across backgrounds can exhibit strong anticorrelations.
Expected 95% CL excluded cross section for the gluino $\tilde{g}\rightarrow q\bar{q}\tilde{\chi}^0_1\rightarrow q\bar{q}q\bar{q} \ell\nu$ model.
Observed 95% CL excluded cross section for the gluino $\tilde{g}\rightarrow q\bar{q}\tilde{\chi}^0_1\rightarrow q\bar{q}q\bar{q} \ell\nu$ model.
Expected 95% CL excluded cross section for the gluino $\tilde{g}\rightarrow \bar{t}\tilde{t} \rightarrow \bar{t}\bar{b}\bar{s}$ model.
Observed 95% CL excluded cross section for the gluino $\tilde{g}\rightarrow \bar{t}\tilde{t} \rightarrow \bar{t}\bar{b}\bar{s}$ model.
Expected 95% CL excluded cross section for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with bino LSP.
Observed 95% CL excluded cross section for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with bino LSP.
Expected 95% CL excluded cross section for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with wino LSP.
Observed 95% CL excluded cross section for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with wino LSP.
Expected 95% CL excluded cross section for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with higgsino LSP.
Observed 95% CL excluded cross section for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with higgsino LSP.
Expected 95% CL excluded cross section for the stop pair production model with bino LSP.
Observed 95% CL excluded cross section for the stop pair production model with bino LSP.
Expected 95% CL excluded cross section for the stop pair production model with wino LSP.
Observed 95% CL excluded cross section for the stop pair production model with wino LSP.
Expected 95% CL excluded cross section for the stop pair production model with higgsino LSP.
Observed 95% CL excluded cross section for the stop pair production model with higgsino LSP.
Acceptance and efficiency for the gluino $\tilde{g}\rightarrow q\bar{q}\tilde{\chi}^0_1\rightarrow q\bar{q}q\bar{q} \ell\nu$ model in the $1\ell$ category.
Acceptance and efficiency for the gluino $\tilde{g}\rightarrow q\bar{q}\tilde{\chi}^0_1\rightarrow q\bar{q}q\bar{q} \ell\nu$ model in the $2\ell^{\mathrm{sc}}$ category.
Acceptance and efficiency for the gluino $\tilde{g}\rightarrow \bar{t}\tilde{t} \rightarrow \bar{t}\bar{b}\bar{s}$ model in the $1\ell$ category.
Acceptance and efficiency for the gluino $\tilde{g}\rightarrow \bar{t}\tilde{t} \rightarrow \bar{t}\bar{b}\bar{s}$ model in the $2\ell^{\mathrm{sc}}$ category.
Acceptance and efficiency for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with higgsino LSP in the $1\ell$ category.
Acceptance and efficiency for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with higgsino LSP in the $2\ell^{\mathrm{sc}}$ category.
Acceptance and efficiency for the stop model with higgsino LSP in the $1\ell$ category.
Acceptance and efficiency for the stop model with higgsino LSP in the $2\ell^{\mathrm{sc}}$ category.
Acceptance and efficiency for the or the electroweakino production model in the EWK analysis discovery SR for the $1\ell$ category with 4 jets, considering $\tilde{\chi}^{\pm}_1 \tilde{\chi}^0_1$ production.
Acceptance and efficiency for the or the electroweakino production model in the EWK analysis discovery SR for the $1\ell$ category with 5 jets, considering $\tilde{\chi}^{\pm}_1 \tilde{\chi}^0_1$ production.
Acceptance and efficiency for the or the electroweakino production model in the EWK analysis discovery SR for the $1\ell$ category with 6 jets, considering $\tilde{\chi}^{\pm}_1 \tilde{\chi}^0_1$ production.
Acceptance and efficiency for the or the electroweakino production model in the EWK analysis discovery SR for the $1\ell$ category with 7 jets, considering $\tilde{\chi}^{\pm}_1 \tilde{\chi}^0_1$ production.
Acceptance and efficiency for the or the electroweakino production model in the EWK analysis discovery SR for the $1\ell$ category with 8 jets, considering $\tilde{\chi}^{\pm}_1 \tilde{\chi}^0_1$ production.
Acceptance and efficiency for the or the electroweakino production model in the EWK analysis discovery SR for the $2\ell^{\mathrm{sc}}$ category, considering $\tilde{\chi}^{\pm}_1 \tilde{\chi}^0_1$ production.
Acceptance and efficiency for the or the electroweakino production model in the EWK analysis discovery SR for the $1\ell$ category with 4 jets, considering $\tilde{\chi}^0_1 \tilde{\chi}^0_2$ production.
Acceptance and efficiency for the or the electroweakino production model in the EWK analysis discovery SR for the $1\ell$ category with 5 jets, considering $\tilde{\chi}^0_1 \tilde{\chi}^0_2$ production.
Acceptance and efficiency for the or the electroweakino production model in the EWK analysis discovery SR for the $1\ell$ category with 6 jets, considering $\tilde{\chi}^0_1 \tilde{\chi}^0_2$ production.
Acceptance and efficiency for the or the electroweakino production model in the EWK analysis discovery SR for the $1\ell$ category with 7 jets, considering $\tilde{\chi}^0_1 \tilde{\chi}^0_2$ production.
Acceptance and efficiency for the or the electroweakino production model in the EWK analysis discovery SR for the $1\ell$ category with 8 jets, considering $\tilde{\chi}^0_1 \tilde{\chi}^0_2$ production.
Acceptance and efficiency for the or the electroweakino production model in the EWK analysis discovery SR for the $2\ell^{\mathrm{sc}}$ category, considering $\tilde{\chi}^0_1 \tilde{\chi}^0_2$ production.
Cut flow for the gluino $\tilde{g}\rightarrow q\bar{q}\tilde{\chi}^0_1\rightarrow q\bar{q}q\bar{q} \ell\nu$ model with $m_{\tilde{g}} = 2$ TeV and $m_{\tilde{\chi}^0_1} = 1$ TeV. The column labelled $\mathrm{N}_{\mathrm{raw}}$ shows the number of generated events, while $\mathrm{N}_{\mathrm{events}}$ shows the expected number of events with a luminosity of 139fb$^{−1}$. The last column shows the cut flow efficiency with respect to all weighted events. The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies $p_{\mathrm{T}} > 25$ GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed. Selections that have not been evaluated in the analysis or are not applicable are denoted with a dash (--).
Cut flow for the gluino $\tilde{g}\rightarrow \bar{t}\tilde{t} \rightarrow \bar{t}\bar{b}\bar{s}$ model with with $m_{\tilde{g}} = 1.6$ TeV and $m_{\tilde{t}} = 1$ TeV. The column labelled $\mathrm{N}_{\mathrm{raw}}$ shows the number of generated events, while $\mathrm{N}_{\mathrm{events}}$ shows the expected number of events with a luminosity of 139fb$^{−1}$. The last column shows the cut flow efficiency with respect to all weighted events. The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies $p_{\mathrm{T}} > 25$ GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed. Selections that have not been evaluated in the analysis or are not applicable are denoted with a dash (--).
Cut flow for the gluino $\tilde{g}\rightarrow t\bar{t}\tilde{\chi}^0_1 \rightarrow t\bar{t} tbs$ model with $m_{\tilde{g}} = 2.2$ TeV and $m_{\tilde{\chi}^0_1} = 1.05$ TeV. The column labelled $\mathrm{N}_{\mathrm{raw}}$ shows the number of generated events, while $\mathrm{N}_{\mathrm{events}}$ shows the expected number of events with a luminosity of 139fb$^{−1}$. The last column shows the cut flow efficiency with respect to all weighted events. The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies $p_{\mathrm{T}} > 25$ GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed. Selections that have not been evaluated in the analysis or are not applicable are denoted with a dash (--).
Cut flow for the stop model with $m_{\tilde{t}} = 1.175$ TeV and $m_{\tilde{\chi}^0_1} = 0.7$ TeV. The column labelled $\mathrm{N}_{\mathrm{raw}}$ shows the number of generated events, while $\mathrm{N}_{\mathrm{events}}$ shows the expected number of events with a luminosity of 139fb$^{−1}$. The last column shows the cut flow efficiency with respect to all weighted events. The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies $p_{\mathrm{T}} > 25$ GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed. Selections that have not been evaluated in the analysis or are not applicable are denoted with a dash (--).
Cut flow for the electroweakino production model, considering only the production of $\tilde{\chi}^{\pm}_1 \tilde{\chi}^0_1$, with $m(\tilde{\chi}^{\pm}_1,\tilde{\chi}^0_1)= 250$ GeV. The column labelled $\mathrm{N}_{\mathrm{raw}}$ shows the number of generated events, while $\mathrm{N}_{\mathrm{events}}$ shows the expected number of events with a luminosity of 139fb$^{−1}$. The last column shows the cut flow efficiency with respect to all weighted events. The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies $p_{\mathrm{T}} > 25$ GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed. In the $2\ell^{\mathrm{sc}}$ category no events are expected, as only one lepton is expected to be produced in the decay.Selections that have not been evaluated in the analysis or are not applicable are denoted with a dash (--).
Cut flow for the electroweakino production model, considering only the production of $\tilde{\chi}^0_1 \tilde{\chi}^0_2$, with $m(\tilde{\chi}^0_1,\tilde{\chi}^0_2)= 250$ GeV. The column labelled $\mathrm{N}_{\mathrm{raw}}$ shows the number of generated events, while $\mathrm{N}_{\mathrm{events}}$ shows the expected number of events with a luminosity of 139fb$^{−1}$. The last column shows the cut flow efficiency with respect to all weighted events. The events are skimmed by requiring at least one electron or muon that satisfies very loose identification criteria, where the lepton satisfies $p_{\mathrm{T}} > 25$ GeV. The efficiency of this cut is considered in the quoted efficiency of the lepton trigger requirement. Selections with negligible inefficiencies on the given sample, such as data quality requirements, are not displayed. Selections that have not been evaluated in the analysis or are not applicable are denoted with a dash (--).
A search for chargino$-$neutralino pair production in three-lepton final states with missing transverse momentum is presented. The study is based on a dataset of $\sqrt{s} = 13$ TeV $pp$ collisions recorded with the ATLAS detector at the LHC, corresponding to an integrated luminosity of 139 fb$^{-1}$. No significant excess relative to the Standard Model predictions is found in data. The results are interpreted in simplified models of supersymmetry, and statistically combined with results from a previous ATLAS search for compressed spectra in two-lepton final states. Various scenarios for the production and decay of charginos ($\tilde\chi^\pm_1$) and neutralinos ($\tilde\chi^0_2$) are considered. For pure higgsino $\tilde\chi^\pm_1\tilde\chi^0_2$ pair-production scenarios, exclusion limits at 95% confidence level are set on $\tilde\chi^0_2$ masses up to 210 GeV. Limits are also set for pure wino $\tilde\chi^\pm_1\tilde\chi^0_2$ pair production, on $\tilde\chi^0_2$ masses up to 640 GeV for decays via on-shell $W$ and $Z$ bosons, up to 300 GeV for decays via off-shell $W$ and $Z$ bosons, and up to 190 GeV for decays via $W$ and Standard Model Higgs bosons.
This is the HEPData space for the ATLAS SUSY EWK three-lepton search. The full resolution figures can be found at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/SUSY-2019-09/ The full statistical likelihoods have been provided for this analysis. They can be downloaded by clicking on the purple 'Resources' button above and selecting the 'Common Resources' category. <b>Region yields:</b> <ul display="inline-block"> <li><a href="?table=Tab%2012%20Onshell%20WZ%20Signal%20Region%20Yields%20Table">Tab 12 Onshell WZ Signal Region Yields Table</a> <li><a href="?table=Tab%2013%20Onshell%20Wh%20Signal%20Region%20Yields%20Table">Tab 13 Onshell Wh Signal Region Yields Table</a> <li><a href="?table=Tab%2014%20Offshell%20low-$E_{T}^{miss}$%20Signal%20Region%20Yields%20Table">Tab 14 Offshell low-$E_{T}^{miss}$ Signal Region Yields Table</a> <li><a href="?table=Tab%2015%20Offshell%20high-$E_{T}^{miss}$%20Signal%20Region%20Yields%20Table">Tab 15 Offshell high-$E_{T}^{miss}$ Signal Region Yields Table</a> <li><a href="?table=Tab%2020%20RJR%20Signal%20Region%20Yields%20Table">Tab 20 RJR Signal Region Yields Table</a> <li><a href="?table=Fig%204%20Onshell%20Control%20and%20Validation%20Region%20Yields">Fig 4 Onshell Control and Validation Region Yields</a> <li><a href="?table=Fig%208%20Offshell%20Control%20and%20Validation%20Region%20Yields">Fig 8 Offshell Control and Validation Region Yields</a> <li><a href="?table=Fig%2010%20Onshell%20WZ%20Signal%20Region%20Yields">Fig 10 Onshell WZ Signal Region Yields</a> <li><a href="?table=Fig%2011%20Onshell%20Wh%20Signal%20Region%20Yields">Fig 11 Onshell Wh Signal Region Yields</a> <li><a href="?table=Fig%2012%20Offshell%20Signal%20Region%20Yields">Fig 12 Offshell Signal Region Yields</a> <li><a href="?table=Fig%2018%20RJR%20Control%20and%20Validation%20Region%20Yields">Fig 18 RJR Control and Validation Region Yields</a> </ul> <b>Exclusion contours:</b> <ul display="inline-block"> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Obs">Fig 16a WZ Exclusion: Wino-bino(+), Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Obs_Up">Fig 16a WZ Exclusion: Wino-bino(+), Obs_Up</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Obs_Down">Fig 16a WZ Exclusion: Wino-bino(+), Obs_Down</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Exp">Fig 16a WZ Exclusion: Wino-bino(+), Exp</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Exp_Up">Fig 16a WZ Exclusion: Wino-bino(+), Exp_Up</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Exp_Down">Fig 16a WZ Exclusion: Wino-bino(+), Exp_Down</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20compressed_Obs">Fig 16a WZ Exclusion: Wino-bino(+), compressed_Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20compressed_Exp">Fig 16a WZ Exclusion: Wino-bino(+), compressed_Exp</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20offshell_Obs">Fig 16a WZ Exclusion: Wino-bino(+), offshell_Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20offshell_Exp">Fig 16a WZ Exclusion: Wino-bino(+), offshell_Exp</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20onshell_Obs">Fig 16a WZ Exclusion: Wino-bino(+), onshell_Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20onshell_Exp">Fig 16a WZ Exclusion: Wino-bino(+), onshell_Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Obs_Up">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Obs_Up</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Obs_Down">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Obs_Down</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Exp_Up">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Exp_Up</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Exp_Down">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Exp_Down</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20compressed_Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), compressed_Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20compressed_Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), compressed_Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20offshell_Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), offshell_Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20offshell_Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), offshell_Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20onshell_Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), onshell_Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20onshell_Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), onshell_Exp</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Obs">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Obs</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Obs_Up">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Obs_Up</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Obs_Down">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Obs_Down</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Exp">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Exp</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Exp_Up">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Exp_Up</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Exp_Down">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Exp_Down</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20compressed_Obs">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), compressed_Obs</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20compressed_Exp">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), compressed_Exp</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20offshell_Obs">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), offshell_Obs</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20offshell_Exp">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), offshell_Exp</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Obs">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Obs</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Obs_Up">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Obs_Up</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Obs_Down">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Obs_Down</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Exp">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Exp</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Exp_Up">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Exp_Up</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Exp_Down">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Exp_Down</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20compressed_Obs">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), compressed_Obs</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20compressed_Exp">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), compressed_Exp</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20offshell_Obs">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), offshell_Obs</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20offshell_Exp">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), offshell_Exp</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Obs">Fig 17 Wh Exclusion, Obs</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Obs_Up">Fig 17 Wh Exclusion, Obs_Up</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Obs_Down">Fig 17 Wh Exclusion, Obs_Down</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Exp">Fig 17 Wh Exclusion, Exp</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Exp_Up">Fig 17 Wh Exclusion, Exp_Up</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Exp_Down">Fig 17 Wh Exclusion, Exp_Down</a> </ul> <b>Upper limits:</b> <ul display="inline-block"> <li><a href="?table=AuxFig%208a%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8a WZ Excl. Upper Limit Obs. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208b%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8b WZ Excl. Upper Limit Exp. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208c%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8c WZ Excl. Upper Limit Obs. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208d%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8d WZ Excl. Upper Limit Exp. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208e%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Wino-bino(-)%20($\Delta%20m$)">AuxFig 8e WZ Excl. Upper Limit Obs. Wino-bino(-) ($\Delta m$)</a> <li><a href="?table=AuxFig%208f%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Wino-bino(-)%20($\Delta%20m$)">AuxFig 8f WZ Excl. Upper Limit Exp. Wino-bino(-) ($\Delta m$)</a> <li><a href="?table=AuxFig%208g%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Higgsino%20($\Delta%20m$)">AuxFig 8g WZ Excl. Upper Limit Obs. Higgsino ($\Delta m$)</a> <li><a href="?table=AuxFig%208h%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Higgsino%20($\Delta%20m$)">AuxFig 8h WZ Excl. Upper Limit Exp. Higgsino ($\Delta m$)</a> <li><a href="?table=AuxFig%209a%20Wh%20Excl.%20Upper%20Limit%20Obs.">AuxFig 9a Wh Excl. Upper Limit Obs.</a> <li><a href="?table=AuxFig%209b%20Wh%20Excl.%20Upper%20Limit%20Exp.">AuxFig 9b Wh Excl. Upper Limit Exp.</a> </ul> <b>Model-independent discovery fits:</b> <ul display="inline-block"> <li><a href="?table=Tab%2018%20Onshell%20Discovery%20Fit%20Table">Tab 18 Onshell Discovery Fit Table</a> <li><a href="?table=Tab%2019%20Offshell%20Discovery%20Fit%20Table">Tab 19 Offshell Discovery Fit Table</a> <li><a href="?table=Tab%2021%20RJR%20Discovery%20Fit%20Table">Tab 21 RJR Discovery Fit Table</a> </ul> <b>Kinematic distributions:</b> <ul display="inline-block"> <li><a href="?table=Fig%2013a%20SR$_{DFOS}^{Wh}$-1%20($\Delta%20R_{OS,%20near}$)">Fig 13a SR$_{DFOS}^{Wh}$-1 ($\Delta R_{OS, near}$)</a> <li><a href="?table=Fig%2013b%20SR$_{DFOS}^{Wh}$-2%20(3rd%20Lep.%20$p_{T}$)">Fig 13b SR$_{DFOS}^{Wh}$-2 (3rd Lep. $p_{T}$)</a> <li><a href="?table=Fig%2013c%20SR$_{0j}^{WZ}$%20($E_{T}^{miss}$)">Fig 13c SR$_{0j}^{WZ}$ ($E_{T}^{miss}$)</a> <li><a href="?table=Fig%2013d%20SR$_{0j}^{WZ}$%20($m_{T}$)">Fig 13d SR$_{0j}^{WZ}$ ($m_{T}$)</a> <li><a href="?table=Fig%2014a%20SR$^{offWZ}_{LowETmiss}$-0j%20($m_{T}^{minmll}$)">Fig 14a SR$^{offWZ}_{LowETmiss}$-0j ($m_{T}^{minmll}$)</a> <li><a href="?table=Fig%2014b%20SR$^{offWZ}_{LowETmiss}$-nj%20($m_{T}^{minmll}$)">Fig 14b SR$^{offWZ}_{LowETmiss}$-nj ($m_{T}^{minmll}$)</a> <li><a href="?table=Fig%2014c%20SR$^{offWZ}_{HighETmiss}$-0j%20($m_{T}^{minmll}$)">Fig 14c SR$^{offWZ}_{HighETmiss}$-0j ($m_{T}^{minmll}$)</a> <li><a href="?table=Fig%2014d%20SR$^{offWZ}_{HighETmiss}$-nj%20($p_T^l%20\div%20E_T^{miss}$)">Fig 14d SR$^{offWZ}_{HighETmiss}$-nj ($p_T^l \div E_T^{miss}$)</a> <li><a href="?table=Fig%2020a%20RJR%20SR3$\ell$-Low%20($p_{T}^{\ell%201}$)">Fig 20a RJR SR3$\ell$-Low ($p_{T}^{\ell 1}$)</a> <li><a href="?table=Fig%2020b%20RJR%20SR3$\ell$-Low%20($H_{3,1}^{PP}$)">Fig 20b RJR SR3$\ell$-Low ($H_{3,1}^{PP}$)</a> <li><a href="?table=Fig%2020c%20RJR%20SR3$\ell$-ISR%20($p_{T~ISR}^{CM}$)">Fig 20c RJR SR3$\ell$-ISR ($p_{T~ISR}^{CM}$)</a> <li><a href="?table=Fig%2020d%20RJR%20SR3$\ell$-ISR%20($R_{ISR}$)">Fig 20d RJR SR3$\ell$-ISR ($R_{ISR}$)</a> </ul> <b>Cutflows:</b> <ul display="inline-block"> <li><a href="?table=AuxTab%205%20Cutflow:%20Onshell%20WZ">AuxTab 5 Cutflow: Onshell WZ</a> <li><a href="?table=AuxTab%206%20Cutflow:%20Onshell%20Wh">AuxTab 6 Cutflow: Onshell Wh</a> <li><a href="?table=AuxTab%207%20Cutflow:%20Offshell%20Wino-bino(%2b)%20(250,235)">AuxTab 7 Cutflow: Offshell Wino-bino(+) (250,235)</a> <li><a href="?table=AuxTab%208%20Cutflow:%20Offshell%20Wino-bino(%2b)%20(125,85)">AuxTab 8 Cutflow: Offshell Wino-bino(+) (125,85)</a> <li><a href="?table=AuxTab%209%20Cutflow:%20Offshell%20Wino-bino(%2b)%20(250,170)">AuxTab 9 Cutflow: Offshell Wino-bino(+) (250,170)</a> <li><a href="?table=AuxTab%2010%20Cutflow:%20Offshell%20Wino-bino(-)%20(250,235)">AuxTab 10 Cutflow: Offshell Wino-bino(-) (250,235)</a> <li><a href="?table=AuxTab%2011%20Cutflow:%20Offshell%20Wino-bino(-)%20(125,85)">AuxTab 11 Cutflow: Offshell Wino-bino(-) (125,85)</a> <li><a href="?table=AuxTab%2012%20Cutflow:%20Offshell%20Wino-bino(-)%20(250,170)">AuxTab 12 Cutflow: Offshell Wino-bino(-) (250,170)</a> <li><a href="?table=AuxTab%2013%20Cutflow:%20Offshell%20Higgsino%20(120,100)">AuxTab 13 Cutflow: Offshell Higgsino (120,100)</a> <li><a href="?table=AuxTab%2014%20Cutflow:%20Offshell%20Higgsino%20(100,40)">AuxTab 14 Cutflow: Offshell Higgsino (100,40)</a> <li><a href="?table=AuxTab%2015%20Cutflow:%20Offshell%20Higgsino%20(185,125)">AuxTab 15 Cutflow: Offshell Higgsino (185,125)</a> </ul> <b>Acceptances and Efficiencies:</b> <ul display="inline-block"> <li><a href="?table=AuxFig%2010a%20Acc:%20Onshell%20SR$_{0j}^{WZ}$">AuxFig 10a Acc: Onshell SR$_{0j}^{WZ}$</a> <li><a href="?table=AuxFig%2010b%20Eff:%20Onshell%20SR$_{0j}^{WZ}$">AuxFig 10b Eff: Onshell SR$_{0j}^{WZ}$</a> <li><a href="?table=AuxFig%2010c%20Acc:%20Onshell%20SR$_{nj}^{WZ}$">AuxFig 10c Acc: Onshell SR$_{nj}^{WZ}$</a> <li><a href="?table=AuxFig%2010d%20Eff:%20Onshell%20SR$_{nj}^{WZ}$">AuxFig 10d Eff: Onshell SR$_{nj}^{WZ}$</a> <li><a href="?table=AuxFig%2011a%20Acc:%20Onshell%20SR$_{low-m_{ll}-0j}^{Wh}$">AuxFig 11a Acc: Onshell SR$_{low-m_{ll}-0j}^{Wh}$</a> <li><a href="?table=AuxFig%2011b%20Eff:%20Onshell%20SR$_{low-m_{ll}-0j}^{Wh}$">AuxFig 11b Eff: Onshell SR$_{low-m_{ll}-0j}^{Wh}$</a> <li><a href="?table=AuxFig%2011c%20Acc:%20Onshell%20SR$_{low-m_{ll}-nj}^{Wh}$">AuxFig 11c Acc: Onshell SR$_{low-m_{ll}-nj}^{Wh}$</a> <li><a href="?table=AuxFig%2011d%20Eff:%20Onshell%20SR$_{low-m_{ll}-nj}^{Wh}$">AuxFig 11d Eff: Onshell SR$_{low-m_{ll}-nj}^{Wh}$</a> <li><a href="?table=AuxFig%2011e%20Acc:%20Onshell%20SR$_{DFOS}^{Wh}$">AuxFig 11e Acc: Onshell SR$_{DFOS}^{Wh}$</a> <li><a href="?table=AuxFig%2011f%20Eff:%20Onshell%20SR$_{DFOS}^{Wh}$">AuxFig 11f Eff: Onshell SR$_{DFOS}^{Wh}$</a> <li><a href="?table=AuxFig%2012a%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 12a Acc: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2012b%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 12b Eff: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2012c%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 12c Acc: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2012d%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 12d Eff: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2012e%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 12e Acc: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2012f%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 12f Eff: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2012g%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 12g Acc: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2012h%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 12h Eff: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2013a%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 13a Acc: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2013b%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 13b Eff: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2013c%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 13c Acc: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2013d%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 13d Eff: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2013e%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 13e Acc: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2013f%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 13f Eff: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2013g%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 13g Acc: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2013h%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 13h Eff: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2014a%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 14a Acc: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2014b%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 14b Eff: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2014c%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 14c Acc: Off. Higgsino SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2014d%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 14d Eff: Off. Higgsino SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2014e%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 14e Acc: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2014f%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 14f Eff: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2014g%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 14g Acc: Off. Higgsino SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2014h%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 14h Eff: Off. Higgsino SR$^{offWZ}_{highETmiss}$-nj</a> </ul>
This is the HEPData space for the ATLAS SUSY EWK three-lepton search. The full resolution figures can be found at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/SUSY-2019-09/ The full statistical likelihoods have been provided for this analysis. They can be downloaded by clicking on the purple 'Resources' button above and selecting the 'Common Resources' category. <b>Region yields:</b> <ul display="inline-block"> <li><a href="?table=Tab%2012%20Onshell%20WZ%20Signal%20Region%20Yields%20Table">Tab 12 Onshell WZ Signal Region Yields Table</a> <li><a href="?table=Tab%2013%20Onshell%20Wh%20Signal%20Region%20Yields%20Table">Tab 13 Onshell Wh Signal Region Yields Table</a> <li><a href="?table=Tab%2014%20Offshell%20low-$E_{T}^{miss}$%20Signal%20Region%20Yields%20Table">Tab 14 Offshell low-$E_{T}^{miss}$ Signal Region Yields Table</a> <li><a href="?table=Tab%2015%20Offshell%20high-$E_{T}^{miss}$%20Signal%20Region%20Yields%20Table">Tab 15 Offshell high-$E_{T}^{miss}$ Signal Region Yields Table</a> <li><a href="?table=Tab%2020%20RJR%20Signal%20Region%20Yields%20Table">Tab 20 RJR Signal Region Yields Table</a> <li><a href="?table=Fig%204%20Onshell%20Control%20and%20Validation%20Region%20Yields">Fig 4 Onshell Control and Validation Region Yields</a> <li><a href="?table=Fig%208%20Offshell%20Control%20and%20Validation%20Region%20Yields">Fig 8 Offshell Control and Validation Region Yields</a> <li><a href="?table=Fig%2010%20Onshell%20WZ%20Signal%20Region%20Yields">Fig 10 Onshell WZ Signal Region Yields</a> <li><a href="?table=Fig%2011%20Onshell%20Wh%20Signal%20Region%20Yields">Fig 11 Onshell Wh Signal Region Yields</a> <li><a href="?table=Fig%2012%20Offshell%20Signal%20Region%20Yields">Fig 12 Offshell Signal Region Yields</a> <li><a href="?table=Fig%2018%20RJR%20Control%20and%20Validation%20Region%20Yields">Fig 18 RJR Control and Validation Region Yields</a> </ul> <b>Exclusion contours:</b> <ul display="inline-block"> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Obs">Fig 16a WZ Exclusion: Wino-bino(+), Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Obs_Up">Fig 16a WZ Exclusion: Wino-bino(+), Obs_Up</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Obs_Down">Fig 16a WZ Exclusion: Wino-bino(+), Obs_Down</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Exp">Fig 16a WZ Exclusion: Wino-bino(+), Exp</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Exp_Up">Fig 16a WZ Exclusion: Wino-bino(+), Exp_Up</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20Exp_Down">Fig 16a WZ Exclusion: Wino-bino(+), Exp_Down</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20compressed_Obs">Fig 16a WZ Exclusion: Wino-bino(+), compressed_Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20compressed_Exp">Fig 16a WZ Exclusion: Wino-bino(+), compressed_Exp</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20offshell_Obs">Fig 16a WZ Exclusion: Wino-bino(+), offshell_Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20offshell_Exp">Fig 16a WZ Exclusion: Wino-bino(+), offshell_Exp</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20onshell_Obs">Fig 16a WZ Exclusion: Wino-bino(+), onshell_Obs</a> <li><a href="?table=Fig%2016a%20WZ%20Exclusion:%20Wino-bino(%2b),%20onshell_Exp">Fig 16a WZ Exclusion: Wino-bino(+), onshell_Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Obs_Up">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Obs_Up</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Obs_Down">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Obs_Down</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Exp_Up">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Exp_Up</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20Exp_Down">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), Exp_Down</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20compressed_Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), compressed_Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20compressed_Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), compressed_Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20offshell_Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), offshell_Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20offshell_Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), offshell_Exp</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20onshell_Obs">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), onshell_Obs</a> <li><a href="?table=Fig%2016b%20WZ%20Exclusion:%20Wino-bino(%2b)%20($\Delta%20m$),%20onshell_Exp">Fig 16b WZ Exclusion: Wino-bino(+) ($\Delta m$), onshell_Exp</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Obs">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Obs</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Obs_Up">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Obs_Up</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Obs_Down">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Obs_Down</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Exp">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Exp</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Exp_Up">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Exp_Up</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20Exp_Down">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), Exp_Down</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20compressed_Obs">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), compressed_Obs</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20compressed_Exp">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), compressed_Exp</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20offshell_Obs">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), offshell_Obs</a> <li><a href="?table=Fig%2016c%20WZ%20Exclusion:%20Wino-bino(-)%20($\Delta%20m$),%20offshell_Exp">Fig 16c WZ Exclusion: Wino-bino(-) ($\Delta m$), offshell_Exp</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Obs">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Obs</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Obs_Up">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Obs_Up</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Obs_Down">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Obs_Down</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Exp">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Exp</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Exp_Up">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Exp_Up</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20Exp_Down">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), Exp_Down</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20compressed_Obs">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), compressed_Obs</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20compressed_Exp">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), compressed_Exp</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20offshell_Obs">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), offshell_Obs</a> <li><a href="?table=Fig%2016d%20WZ%20Exclusion:%20Higgsino%20($\Delta%20m$),%20offshell_Exp">Fig 16d WZ Exclusion: Higgsino ($\Delta m$), offshell_Exp</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Obs">Fig 17 Wh Exclusion, Obs</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Obs_Up">Fig 17 Wh Exclusion, Obs_Up</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Obs_Down">Fig 17 Wh Exclusion, Obs_Down</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Exp">Fig 17 Wh Exclusion, Exp</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Exp_Up">Fig 17 Wh Exclusion, Exp_Up</a> <li><a href="?table=Fig%2017%20Wh%20Exclusion,%20Exp_Down">Fig 17 Wh Exclusion, Exp_Down</a> </ul> <b>Upper limits:</b> <ul display="inline-block"> <li><a href="?table=AuxFig%208a%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8a WZ Excl. Upper Limit Obs. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208b%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8b WZ Excl. Upper Limit Exp. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208c%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8c WZ Excl. Upper Limit Obs. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208d%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Wino-bino(%2b)%20($\Delta%20m$)">AuxFig 8d WZ Excl. Upper Limit Exp. Wino-bino(+) ($\Delta m$)</a> <li><a href="?table=AuxFig%208e%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Wino-bino(-)%20($\Delta%20m$)">AuxFig 8e WZ Excl. Upper Limit Obs. Wino-bino(-) ($\Delta m$)</a> <li><a href="?table=AuxFig%208f%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Wino-bino(-)%20($\Delta%20m$)">AuxFig 8f WZ Excl. Upper Limit Exp. Wino-bino(-) ($\Delta m$)</a> <li><a href="?table=AuxFig%208g%20WZ%20Excl.%20Upper%20Limit%20Obs.%20Higgsino%20($\Delta%20m$)">AuxFig 8g WZ Excl. Upper Limit Obs. Higgsino ($\Delta m$)</a> <li><a href="?table=AuxFig%208h%20WZ%20Excl.%20Upper%20Limit%20Exp.%20Higgsino%20($\Delta%20m$)">AuxFig 8h WZ Excl. Upper Limit Exp. Higgsino ($\Delta m$)</a> <li><a href="?table=AuxFig%209a%20Wh%20Excl.%20Upper%20Limit%20Obs.">AuxFig 9a Wh Excl. Upper Limit Obs.</a> <li><a href="?table=AuxFig%209b%20Wh%20Excl.%20Upper%20Limit%20Exp.">AuxFig 9b Wh Excl. Upper Limit Exp.</a> </ul> <b>Model-independent discovery fits:</b> <ul display="inline-block"> <li><a href="?table=Tab%2018%20Onshell%20Discovery%20Fit%20Table">Tab 18 Onshell Discovery Fit Table</a> <li><a href="?table=Tab%2019%20Offshell%20Discovery%20Fit%20Table">Tab 19 Offshell Discovery Fit Table</a> <li><a href="?table=Tab%2021%20RJR%20Discovery%20Fit%20Table">Tab 21 RJR Discovery Fit Table</a> </ul> <b>Kinematic distributions:</b> <ul display="inline-block"> <li><a href="?table=Fig%2013a%20SR$_{DFOS}^{Wh}$-1%20($\Delta%20R_{OS,%20near}$)">Fig 13a SR$_{DFOS}^{Wh}$-1 ($\Delta R_{OS, near}$)</a> <li><a href="?table=Fig%2013b%20SR$_{DFOS}^{Wh}$-2%20(3rd%20Lep.%20$p_{T}$)">Fig 13b SR$_{DFOS}^{Wh}$-2 (3rd Lep. $p_{T}$)</a> <li><a href="?table=Fig%2013c%20SR$_{0j}^{WZ}$%20($E_{T}^{miss}$)">Fig 13c SR$_{0j}^{WZ}$ ($E_{T}^{miss}$)</a> <li><a href="?table=Fig%2013d%20SR$_{0j}^{WZ}$%20($m_{T}$)">Fig 13d SR$_{0j}^{WZ}$ ($m_{T}$)</a> <li><a href="?table=Fig%2014a%20SR$^{offWZ}_{LowETmiss}$-0j%20($m_{T}^{minmll}$)">Fig 14a SR$^{offWZ}_{LowETmiss}$-0j ($m_{T}^{minmll}$)</a> <li><a href="?table=Fig%2014b%20SR$^{offWZ}_{LowETmiss}$-nj%20($m_{T}^{minmll}$)">Fig 14b SR$^{offWZ}_{LowETmiss}$-nj ($m_{T}^{minmll}$)</a> <li><a href="?table=Fig%2014c%20SR$^{offWZ}_{HighETmiss}$-0j%20($m_{T}^{minmll}$)">Fig 14c SR$^{offWZ}_{HighETmiss}$-0j ($m_{T}^{minmll}$)</a> <li><a href="?table=Fig%2014d%20SR$^{offWZ}_{HighETmiss}$-nj%20($p_T^l%20\div%20E_T^{miss}$)">Fig 14d SR$^{offWZ}_{HighETmiss}$-nj ($p_T^l \div E_T^{miss}$)</a> <li><a href="?table=Fig%2020a%20RJR%20SR3$\ell$-Low%20($p_{T}^{\ell%201}$)">Fig 20a RJR SR3$\ell$-Low ($p_{T}^{\ell 1}$)</a> <li><a href="?table=Fig%2020b%20RJR%20SR3$\ell$-Low%20($H_{3,1}^{PP}$)">Fig 20b RJR SR3$\ell$-Low ($H_{3,1}^{PP}$)</a> <li><a href="?table=Fig%2020c%20RJR%20SR3$\ell$-ISR%20($p_{T~ISR}^{CM}$)">Fig 20c RJR SR3$\ell$-ISR ($p_{T~ISR}^{CM}$)</a> <li><a href="?table=Fig%2020d%20RJR%20SR3$\ell$-ISR%20($R_{ISR}$)">Fig 20d RJR SR3$\ell$-ISR ($R_{ISR}$)</a> </ul> <b>Cutflows:</b> <ul display="inline-block"> <li><a href="?table=AuxTab%205%20Cutflow:%20Onshell%20WZ">AuxTab 5 Cutflow: Onshell WZ</a> <li><a href="?table=AuxTab%206%20Cutflow:%20Onshell%20Wh">AuxTab 6 Cutflow: Onshell Wh</a> <li><a href="?table=AuxTab%207%20Cutflow:%20Offshell%20Wino-bino(%2b)%20(250,235)">AuxTab 7 Cutflow: Offshell Wino-bino(+) (250,235)</a> <li><a href="?table=AuxTab%208%20Cutflow:%20Offshell%20Wino-bino(%2b)%20(125,85)">AuxTab 8 Cutflow: Offshell Wino-bino(+) (125,85)</a> <li><a href="?table=AuxTab%209%20Cutflow:%20Offshell%20Wino-bino(%2b)%20(250,170)">AuxTab 9 Cutflow: Offshell Wino-bino(+) (250,170)</a> <li><a href="?table=AuxTab%2010%20Cutflow:%20Offshell%20Wino-bino(-)%20(250,235)">AuxTab 10 Cutflow: Offshell Wino-bino(-) (250,235)</a> <li><a href="?table=AuxTab%2011%20Cutflow:%20Offshell%20Wino-bino(-)%20(125,85)">AuxTab 11 Cutflow: Offshell Wino-bino(-) (125,85)</a> <li><a href="?table=AuxTab%2012%20Cutflow:%20Offshell%20Wino-bino(-)%20(250,170)">AuxTab 12 Cutflow: Offshell Wino-bino(-) (250,170)</a> <li><a href="?table=AuxTab%2013%20Cutflow:%20Offshell%20Higgsino%20(120,100)">AuxTab 13 Cutflow: Offshell Higgsino (120,100)</a> <li><a href="?table=AuxTab%2014%20Cutflow:%20Offshell%20Higgsino%20(100,40)">AuxTab 14 Cutflow: Offshell Higgsino (100,40)</a> <li><a href="?table=AuxTab%2015%20Cutflow:%20Offshell%20Higgsino%20(185,125)">AuxTab 15 Cutflow: Offshell Higgsino (185,125)</a> </ul> <b>Acceptances and Efficiencies:</b> <ul display="inline-block"> <li><a href="?table=AuxFig%2010a%20Acc:%20Onshell%20SR$_{0j}^{WZ}$">AuxFig 10a Acc: Onshell SR$_{0j}^{WZ}$</a> <li><a href="?table=AuxFig%2010b%20Eff:%20Onshell%20SR$_{0j}^{WZ}$">AuxFig 10b Eff: Onshell SR$_{0j}^{WZ}$</a> <li><a href="?table=AuxFig%2010c%20Acc:%20Onshell%20SR$_{nj}^{WZ}$">AuxFig 10c Acc: Onshell SR$_{nj}^{WZ}$</a> <li><a href="?table=AuxFig%2010d%20Eff:%20Onshell%20SR$_{nj}^{WZ}$">AuxFig 10d Eff: Onshell SR$_{nj}^{WZ}$</a> <li><a href="?table=AuxFig%2011a%20Acc:%20Onshell%20SR$_{low-m_{ll}-0j}^{Wh}$">AuxFig 11a Acc: Onshell SR$_{low-m_{ll}-0j}^{Wh}$</a> <li><a href="?table=AuxFig%2011b%20Eff:%20Onshell%20SR$_{low-m_{ll}-0j}^{Wh}$">AuxFig 11b Eff: Onshell SR$_{low-m_{ll}-0j}^{Wh}$</a> <li><a href="?table=AuxFig%2011c%20Acc:%20Onshell%20SR$_{low-m_{ll}-nj}^{Wh}$">AuxFig 11c Acc: Onshell SR$_{low-m_{ll}-nj}^{Wh}$</a> <li><a href="?table=AuxFig%2011d%20Eff:%20Onshell%20SR$_{low-m_{ll}-nj}^{Wh}$">AuxFig 11d Eff: Onshell SR$_{low-m_{ll}-nj}^{Wh}$</a> <li><a href="?table=AuxFig%2011e%20Acc:%20Onshell%20SR$_{DFOS}^{Wh}$">AuxFig 11e Acc: Onshell SR$_{DFOS}^{Wh}$</a> <li><a href="?table=AuxFig%2011f%20Eff:%20Onshell%20SR$_{DFOS}^{Wh}$">AuxFig 11f Eff: Onshell SR$_{DFOS}^{Wh}$</a> <li><a href="?table=AuxFig%2012a%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 12a Acc: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2012b%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 12b Eff: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2012c%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 12c Acc: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2012d%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 12d Eff: Off. Wino-bino(+) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2012e%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 12e Acc: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2012f%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 12f Eff: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2012g%20Acc:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 12g Acc: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2012h%20Eff:%20Off.%20Wino-bino(%2b)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 12h Eff: Off. Wino-bino(+) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2013a%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 13a Acc: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2013b%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 13b Eff: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2013c%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 13c Acc: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2013d%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 13d Eff: Off. Wino-bino(-) SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2013e%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 13e Acc: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2013f%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 13f Eff: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2013g%20Acc:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 13g Acc: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2013h%20Eff:%20Off.%20Wino-bino(-)%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 13h Eff: Off. Wino-bino(-) SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2014a%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 14a Acc: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2014b%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-0j">AuxFig 14b Eff: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-0j</a> <li><a href="?table=AuxFig%2014c%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 14c Acc: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2014d%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{lowETmiss}$-nj">AuxFig 14d Eff: Off. Higgsino SR$^{offWZ}_{lowETmiss}$-nj</a> <li><a href="?table=AuxFig%2014e%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 14e Acc: Off. Higgsino SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2014f%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-0j">AuxFig 14f Eff: Off. Higgsino SR$^{offWZ}_{highETmiss}$-0j</a> <li><a href="?table=AuxFig%2014g%20Acc:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 14g Acc: Off. Higgsino SR$^{offWZ}_{highETmiss}$-nj</a> <li><a href="?table=AuxFig%2014h%20Eff:%20Off.%20Higgsino%20SR$^{offWZ}_{highETmiss}$-nj">AuxFig 14h Eff: Off. Higgsino SR$^{offWZ}_{highETmiss}$-nj</a> </ul>
Comparison of the observed data and expected SM background yields in the CRs (pre-fit) and VRs (post-fit) of the onshell $W\!Z$ and $W\!h$ selections. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. The bottom panel shows the relative difference between the observed data and expected yields for the CRs and the significance of the difference for the VRs, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the CRs (pre-fit) and VRs (post-fit) of the onshell $W\!Z$ and $W\!h$ selections. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. The bottom panel shows the relative difference between the observed data and expected yields for the CRs and the significance of the difference for the VRs, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the CRs and VRs of the offshell $W\!Z$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the CRs and VRs of the offshell $W\!Z$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Observed and expected yields after the background-only fit in the SRs for the onshell $W\!Z$ selection. The normalization factors of the $W\!Z$ sample are extracted separately for the 0j, low-H<sub>T</sub> and high-H<sub>T</sub> regions, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in the SRs for the onshell $W\!Z$ selection. The normalization factors of the $W\!Z$ sample are extracted separately for the 0j, low-H<sub>T</sub> and high-H<sub>T</sub> regions, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in the SRs for the $W\!h$ selection. The normalization factors of the $W\!Z$ sample are extracted separately for the 0j, low-H<sub>T</sub> and high-H<sub>T</sub> regions, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, tt̄+X and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in the SRs for the $W\!h$ selection. The normalization factors of the $W\!Z$ sample are extracted separately for the 0j, low-H<sub>T</sub> and high-H<sub>T</sub> regions, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, tt̄+X and rare top processes. Combined statistical and systematic uncertainties are presented.
Comparison of the observed data and expected SM background yields in the SRs of the onshell $W\!Z$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the SRs of the onshell $W\!Z$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the SRs of the $W\!h$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, tt̄+X and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the SRs of the $W\!h$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, tt̄+X and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Observed and expected yields after the background-only fit in SR<sup>offWZ</sup><sub>lowETmiss</sub>. The normalization factors of the $W\!Z$ sample extracted separately for 0j and nj, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in SR<sup>offWZ</sup><sub>lowETmiss</sub>. The normalization factors of the $W\!Z$ sample extracted separately for 0j and nj, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in SR<sup>offWZ</sup><sub>highETmiss</sub>. The normalization factors of the $W\!Z$ sample extracted separately for 0j and nj, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in SR<sup>offWZ</sup><sub>highETmiss</sub>. The normalization factors of the $W\!Z$ sample extracted separately for 0j and nj, and are treated separately in the combined fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Comparison of the observed data and expected SM background yields in the SRs of the offshell $W\!Z$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W^{*}\!Z^{*}$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the SRs of the offshell $W\!Z$ selection. The SM prediction is taken from the background-only fit. The "Others" category contains the single-top, WW, triboson, Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W^{*}\!Z^{*}$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the onshell $W\!Z$ and $W\!h$ selections. The figure shows (a) the ΔR<sub>OS,near</sub> distribution in SR<sup>Wh</sup><sub>DF</sub>-1, (b) the 3rd leading lepton p<sub>T</sub> in SR<sup>Wh</sup><sub>DF</sub>-2, and the (c) E<sub>T</sub><sup>miss</sup> and (d) m<sub>T</sub> distributions in SR<sup>WZ</sup><sub>0j</sub> (with all SR-i bins of SR<sup>WZ</sup><sub>0j</sub> summed up). The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes, except in the top panels, where triboson and Higgs production contributions are shown separately, and tt̄+X is merged into Others. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$/$W\!h$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Kinematic distributions after the background-only fit showing the data and the post-fit expected background, in SRs of the offshell $W\!Z$ selection. The figure shows the m<sub>T</sub><sup>m<sub>ll</sub>min</sup> distribution in (a) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj and (c) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and the |p<sub>T</sub><sup>lep</sup>|/E<sub>T</sub><sup>miss</sup> distribution in (d) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj. The contributing m<sub>ll</sub><sup>min</sup> mass bins within each SR<sup>offWZ</sup> category are summed together. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by an arrow. The last bin includes overflow. The "Others" category contains backgrounds from single-top, WW, triboson, Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Observed (N<sub>obs</sub>) yields after the discovery-fit and expected (N<sub>exp</sub>) after the background-only fit, for the inclusive SRs of the onshell $W\!Z$ and $W\!h$ selections. The third and fourth column list the 95 CL upper limits on the visible cross-section (σ<sub>vis</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The fifth column (S<sub>exp</sub><sup>95</sup>) shows the 95 CL upper limit on the number of signal events, given the expected number (and ± 1σ excursions on the expectation) of background events. The last two columns indicate the CLb value, i.e. the confidence level observed for the background-only hypothesis, and the discovery p-value (p(s = 0)). If the observed yield is below the expected yield, the p-value is capped at 0.5.
Observed (N<sub>obs</sub>) yields after the discovery-fit and expected (N<sub>exp</sub>) after the background-only fit, for the inclusive SRs of the onshell $W\!Z$ and $W\!h$ selections. The third and fourth column list the 95 CL upper limits on the visible cross-section (σ<sub>vis</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The fifth column (S<sub>exp</sub><sup>95</sup>) shows the 95 CL upper limit on the number of signal events, given the expected number (and ± 1σ excursions on the expectation) of background events. The last two columns indicate the CLb value, i.e. the confidence level observed for the background-only hypothesis, and the discovery p-value (p(s = 0)). If the observed yield is below the expected yield, the p-value is capped at 0.5.
Observed (N<sub>obs</sub>) yields after the discovery-fit and expected (N<sub>exp</sub>) after the background-only fit, for the inclusive SRs of the offshell $W\!Z$ selection. The third and fourth column list the 95 CL upper limits on the visible cross section (σ<sub>vis</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The fifth column (S<sub>exp</sub><sup>95</sup>) shows the 95 CL upper limit on the number of signal events, given the expected number (and ± 1σ excursions on the expectation) of background events. The last two columns indicate the CLb value, i.e. the confidence level observed for the background-only hypothesis, and the discovery p-value (p(s = 0)). If the observed yield is below the expected yield, the p-value is capped at 0.5.
Observed (N<sub>obs</sub>) yields after the discovery-fit and expected (N<sub>exp</sub>) after the background-only fit, for the inclusive SRs of the offshell $W\!Z$ selection. The third and fourth column list the 95 CL upper limits on the visible cross section (σ<sub>vis</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The fifth column (S<sub>exp</sub><sup>95</sup>) shows the 95 CL upper limit on the number of signal events, given the expected number (and ± 1σ excursions on the expectation) of background events. The last two columns indicate the CLb value, i.e. the confidence level observed for the background-only hypothesis, and the discovery p-value (p(s = 0)). If the observed yield is below the expected yield, the p-value is capped at 0.5.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!Z$-mediated models in the (a,b) wino/bino (+) scenario, (c) the wino/bino (-) scenario, and (d) the higgsino scenario. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>exp</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties. The statistical combination of the onshell $W\!Z$, offshell $W\!Z$, and compressed results is shown as the main contour, while the observed (expected) limits for each individual selection are overlaid in green, blue, and orange solid (dashed) lines, respectively. The exclusion is shown projected (a) onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane or (b,c,d) onto the m(χ̃<sub>2</sub><sup>0</sup>) vs Δm plane. The light grey area denotes (top) the constraints obtained by the previous equivalent analysis in ATLAS using the 8 TeV 20.3 fb<sup>-1</sup> dataset [17], and (d) the LEP lower χ̃<sub>1</sub><sup>±</sup> mass limit [56]. The pale blue line in the top right panel represents the mass splitting range that yields a dark matter relic density equal to the observed relic density, Ω h<sup>2</sup>=0.1186±0.0020 [172], when the mass parameters of all the decoupled SUSY partners are set to 5 TeV and tanβ is chosen such that the SM-like Higgs boson mass is consistent with the observed value [43]. The area above (below) the blue line represents a dark-matter relic density larger (smaller) than the observed.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Exclusion limits obtained for the $W\!h$med in the wino/bino (+) scenario, calculated using the $W\!h$ SRs and projected onto the m(χ̃<sub>1</sub><sup>±</sup>, χ̃<sub>2</sub><sup>0</sup>) vs m(χ̃<sub>1</sub><sup>0</sup>) plane. The expected 95 CL sensitivity (dashed black line) is shown with ±1σ<sub>{exp}</sub> (yellow band) from experimental systematic uncertainties and statistical uncertainties on the data yields, the observed limit (red solid line) is shown with ±1σ<sub>theory</sub> (dotted red lines) from signal cross-section uncertainties.
Comparison of the observed data and expected SM background yields in the CRs and VRs of the RJR selection. The SM prediction is taken from the background-only fit. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Comparison of the observed data and expected SM background yields in the CRs and VRs of the RJR selection. The SM prediction is taken from the background-only fit. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. The hatched band indicates the combined theoretical, experimental, and MC statistical uncertainties. The bottom panel shows the significance of the difference between the observed and expected yields, calculated with the profile likelihood method from [169], adding a minus sign if the yield is below the prediction.
Observed and expected yields after the background-only fit in the SRs for the RJR selection. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Observed and expected yields after the background-only fit in the SRs for the RJR selection. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Combined statistical and systematic uncertainties are presented.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
Example of kinematic distributions after the background-only fit, showing the data and the post-fit expected background, in regions of the RJR selection. The figure shows the (a) p<sub>T</sub><sup>ℓ<sub>1</sub></sup> and (b) H<sup>PP</sup><sub>3,1</sub> distributions in SR3ℓ-Low, and the (c) p<sup>CM</sup><sub>T ISR</sub> and (d) R<sub>ISR</sub> distributions in SR3ℓ-ISR. The last bin includes overflow. The "FNP leptons" category contains backgrounds from tt̄, tW, WW and Z+jets processes. The "Others" category contains backgrounds from Higgs and rare top processes. Distributions for wino/bino (+) χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> → $W\!Z$ signals are overlaid, with mass values given as (m(χ̃<sub>1</sub><sup>±</sup>),m(χ̃<sub>1</sub><sup>0</sup>)) GeV. The bottom panel shows the ratio of the observed data to the predicted yields. The hatched bands indicate the combined theoretical, experimental, and MC statistical uncertainties.
{Results of the discovery-fit for the SRs of the RJR selection, calculated using pseudo-experiments.} The first and second column list the 95 CL upper limits on the visible cross section (σ<sub>vis</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The third column (S<sub>exp</sub><sup>95</sup>) shows the 95 CL upper limit on the number of signal events, given the expected number (and ± 1σ excursions on the expectation) of background events. The last two columns indicate the CLb value, i.e. the confidence level observed for the background-only hypothesis, and the discovery p-value (p(s = 0)). If the observed yield is below the expected yield, the p-value is capped at 0.5. vspace{0.5em}
{Results of the discovery-fit for the SRs of the RJR selection, calculated using pseudo-experiments.} The first and second column list the 95 CL upper limits on the visible cross section (σ<sub>vis</sub><sup>95</sup>) and on the number of signal events (S<sub>obs</sub><sup>95</sup>). The third column (S<sub>exp</sub><sup>95</sup>) shows the 95 CL upper limit on the number of signal events, given the expected number (and ± 1σ excursions on the expectation) of background events. The last two columns indicate the CLb value, i.e. the confidence level observed for the background-only hypothesis, and the discovery p-value (p(s = 0)). If the observed yield is below the expected yield, the p-value is capped at 0.5. vspace{0.5em}
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!Z$-mediated model, for the (1st and 2nd row) wino/bino (+) scenario, (3rd row) the wino/bino (-) scenario, and (4th row) the higgsino scenario, as in Figure 16. Black numbers represent the observed (a) and expected (b) upper cross-section limits.
Exclusion limits obtained for the $W\!h$-mediated model, for the wino/bino (+) scenario, as in Figure 17. The black numbers represent the observed (a,c,e,g) and expected (b,d,f,h) upper cross-section limits.
Exclusion limits obtained for the $W\!h$-mediated model, for the wino/bino (+) scenario, as in Figure 17. The black numbers represent the observed (a,c,e,g) and expected (b,d,f,h) upper cross-section limits.
Exclusion limits obtained for the $W\!h$-mediated model, for the wino/bino (+) scenario, as in Figure 17. The black numbers represent the observed (a,c,e,g) and expected (b,d,f,h) upper cross-section limits.
Exclusion limits obtained for the $W\!h$-mediated model, for the wino/bino (+) scenario, as in Figure 17. The black numbers represent the observed (a,c,e,g) and expected (b,d,f,h) upper cross-section limits.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c) truth-level acceptances and (b,d) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>WZ</sup><sub>0j</sub>, (c,d) SR<sup>WZ</sup><sub>nj</sub> regions of the onshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e) truth-level acceptances and (b,d,f) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-0j</sub>, (c,d) SR<sup>Wh</sup><sub>low-m<sub>ll</sub>-nj</sub>, and (e,f) SR<sup>Wh</sup><sub>DF</sub> regions of the $W\!h$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (+) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the wino/bino (-) scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
The χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> (a,c,e,g) truth-level acceptances and (b,d,f,h) reconstruction efficiencies for the higgsino scenario, in the inclusive (a,b) SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, (c,d) SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, (e,f) SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and (g,h) SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions of the offshell $W\!Z$ selection, after MC-to-data efficiency weights are applied.
Summary of onshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (300,200) GeV and m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (600,100) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal points, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks per inclusive regions, and then further for each SR. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5.
Summary of onshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (300,200) GeV and m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (600,100) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal points, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks per inclusive regions, and then further for each SR. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5.
Summary of $W\!h$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (190,60) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks per inclusive regions, and then further for each SR. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5.
Summary of $W\!h$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (190,60) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks per inclusive regions, and then further for each SR. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,235) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,235) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (125,85) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (125,85) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,170) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,170) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (+) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,235) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (-) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,235) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (-) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (125,85) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (-) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (125,85) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (-) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,170) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (-) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (250,170) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the wino/bino (-) interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (120,100) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the higgsino interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (120,100) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the higgsino interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (100,40) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the higgsino interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (100,40) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the higgsino interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (185,125) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the higgsino interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
Summary of offshell $W\!Z$ event selections for the m(χ̃<sub>2</sub><sup>0</sup>,χ̃<sub>1</sub><sup>0</sup>) = (185,125) GeV χ̃<sub>1</sub><sup>±</sup>/χ̃<sub>2</sub><sup>0</sup> signal point, for the higgsino interpretation. The yields are normalised to a luminosity of 139 fb<sup>-1</sup>, and MC-to-data efficiency weights from triggering and from the reconstruction and identification of individual physics objects are applied to the final yields in each signal region. After the initial selections, the table is split in row blocks for the inclusive SR<sup>offWZ</sup><sub>lowETmiss</sub>-0j, SR<sup>offWZ</sup><sub>lowETmiss</sub>-nj, SR<sup>offWZ</sup><sub>highETmiss</sub>-0j, and SR<sup>offWZ</sup><sub>highETmiss</sub>-nj regions, with the individual SR results in columns. The inclusive OR of regions a through g2 is given in the last column. Selection details per bin are indicated in bracketed blue as relevant, and the final yield for each SR is highlighted in bold green at the end of each block. The generator filters are discussed in detail in Section 4. The "3 isolated lepton selection" includes the common event selection as discussed in Section 5 and the initial SFOS lepton pair selection.
A search for lepton-flavor-violating $Z\to e\tau$ and $Z\to\mu\tau$ decays with $pp$ collision data recorded by the ATLAS detector at the LHC is presented. This analysis uses 139 fb$^{-1}$ of Run 2 $pp$ collisions at $\sqrt{s}=13$ TeV and is combined with the results of a similar ATLAS search in the final state in which the $\tau$-lepton decays hadronically, using the same data set as well as Run 1 data. The addition of leptonically decaying $\tau$-leptons significantly improves the sensitivity reach for $Z\to\ell\tau$ decays. The $Z\to\ell\tau$ branching fractions are constrained in this analysis to $\mathcal{B}(Z\to e\tau)<7.0\times10^{-6}$ and $\mathcal{B}(Z\to \mu\tau)<7.2\times10^{-6}$ at 95% confidence level. The combination with the previously published analyses sets the strongest constraints to date: $\mathcal{B}(Z\to e\tau)<5.0\times10^{-6}$ and $\mathcal{B}(Z\to \mu\tau)<6.5\times10^{-6}$ at 95% confidence level.
The best-fit predicted and observed distributions of the combined NN output in the low-$p_\text{T}$-SR for the $e\tau_\mu$ channel. The first and last bin include underflow and overflow events, respectively.
The best-fit predicted and observed distributions of the combined NN output in the low-$p_\text{T}$-SR for the $\mu\tau_e$ channel. The first and last bin include underflow and overflow events, respectively.
The best-fit predicted and observed distributions of the combined NN output in the high-$p_\text{T}$-SR for the $e\tau_\mu$ channel. The first and last bin include underflow and overflow events, respectively.
The best-fit predicted and observed distributions of the combined NN output in the high-$p_\text{T}$-SR for the $\mu\tau_e$ channel. The first and last bin include underflow and overflow events, respectively.
The best-fit predicted and observed distributions of the collinear mass $m_\text{coll}$ in the high-$p_\text{T}$-SR for the $e\tau_\mu$ channel. The first and last bin include underflow and overflow events, respectively.
The best-fit predicted and observed distributions of the collinear mass $m_\text{coll}$ in the high-$p_\text{T}$-SR for the $\mu\tau_e$ channel. The first and last bin include underflow and overflow events, respectively.
Observed and expected upper limits on $\mathcal{B}(Z\rightarrow\ell\tau)$ with leptonically decaying $\tau$ at 95% confidence level.
Observed and expected upper limits on $\mathcal{B}(Z\rightarrow\ell\tau)$ at 95% confidence level, combination of hadronically and leptonically decaying $\tau$ channels.
The best-fit predicted and observed distributions of the collinear mass $m_\text{coll}$ in the CRZ$\tau\tau$ for the $e\tau_\mu$ channel. The first and last bin include underflow and overflow events, respectively.
The best-fit predicted and observed distributions of the collinear mass $m_\text{coll}$ in the CRZ$\tau\tau$ for the $\mu\tau_e$ channel. The first and last bin include underflow and overflow events, respectively.
The best-fit predicted and observed distributions of the combined NN output in the CRZ$\tau\tau$ for the $e\tau_\mu$ channel. The first and last bin include underflow and overflow events, respectively.
The best-fit predicted and observed distributions of the combined NN output in the CRZ$\tau\tau$ for the $\mu\tau_e$ channel. The first and last bin include underflow and overflow events, respectively.
The best-fit predicted and observed distributions of the leading lepton transverse momentum $p_\text{T}(e)$ in the high-$p_\text{T}$-SR for the $e\tau_\mu$ channel. The first and last bin include underflow and overflow events, respectively.
The best-fit predicted and observed distributions of the leading lepton transverse momentum $p_\text{T}(\mu)$ in the high-$p_\text{T}$-SR for the $\mu\tau_e$ channel. The first and last bin include underflow and overflow events, respectively.
The best-fit predicted and observed distributions of the missing transverse momentum $E^\text{miss}_\text{T}$ in the low-$p_\text{T}$-SR for the $e\tau_\mu$ channel. The first and last bin include underflow and overflow events, respectively.
The best-fit predicted and observed distributions of the missing transverse momentum $E^\text{miss}_\text{T}$ in the low-$p_\text{T}$-SR for the $\mu\tau_e$ channel. The first and last bin include underflow and overflow events, respectively.
A search for dark-matter particles in events with large missing transverse momentum and a Higgs boson candidate decaying into two photons is reported. The search uses $139$ fb$^{-1}$ of proton-proton collision data collected at $\sqrt{s}=13$ TeV with the ATLAS detector at the CERN LHC between 2015 and 2018. No significant excess of events over the Standard Model predictions is observed. The results are interpreted by extracting limits on three simplified models that include either vector or pseudoscalar mediators and predict a final state with a pair of dark-matter candidates and a Higgs boson decaying into two photons.
The $E^{miss}_{T}$ distribution of data and MC after the diphoton selection.
The observed exclusion contor for the $Z^{\prime}_{B}$ model in the $m_{\chi}$-$m_{Z^{\prime}_{B}}$ plane.
The expected exclusion contor for the $Z^{\prime}_{B}$ model in the $m_{\chi}$-$m_{Z^{\prime}_{B}}$ plane.
The +1 $\sigma$ band of the observed exclusion contor for the $Z^{\prime}_{B}$ model in the $m_{\chi}$-$m_{Z^{\prime}_{B}}$ plane.
The -1 $\sigma$ band of the observed exclusion contor for the $Z^{\prime}_{B}$ model in the $m_{\chi}$-$m_{Z^{\prime}_{B}}$ plane.
A comparison of the inferred limits to the constraints from direct detection experiments on the spin-independent DM--nucleon cross section in the context of the $Z'_B$ simplified model with vector couplings. Limits are shown at 90% CL.
The observed exclusion contor for the $Z^{\prime}$-2HDM model in the $m_{A}$-$m_{Z^{\prime}}$ plane.
The expected exclusion contor for the $Z^{\prime}$-2HDM model in the $m_{A}$-$m_{Z^{\prime}}$ plane.
The +1 $\sigma$ band of the observed exclusion contor for the $m_{A}$-$Z^{\prime}$-2HDM model in the $m_{Z^{\prime}}$ plane.
The -1 $\sigma$ band of the observed exclusion contor for the $m_{A}$-$Z^{\prime}$-2HDM model in the $m_{Z^{\prime}}$ plane.
The observed exclusion contor for the 2HDM-a model in the $m_{A}$-$m_{a}$ plane.
The expected exclusion contor for the 2HDM-a model in the $m_{A}$-$m_{a}$ plane.
The +1 $\sigma$ band of the observed exclusion contor for the 2HDM-a model in the $m_{A}$-$m_{a}$ plane.
The -1 $\sigma$ band of the observed exclusion contor for the 2HDM-a model in the $m_{A}$-$m_{a}$ plane.
The observed exclusion contor for the 2HDM-a model in the $tan\beta$-$m_{a}$ plane.
The expected exclusion contor for the 2HDM-a model in the $tan\beta$-$m_{a}$ plane.
The +1 $\sigma$ band of the observed exclusion contor for the 2HDM-a model in the $tan\beta$-$m_{a}$ plane.
The -1 $\sigma$ band of the observed exclusion contor for the 2HDM-a model in the $tan\beta$-$m_{a}$ plane.
The exclusion limits at 95% CL for the 2HDM+a model as a function of $\sin \theta$ for $m_{A,H^{\pm},H}$= 600GeV, $m_a$ = 200GeV, $\tan \beta$ = 1.0$.
The exclusion limits at 95% CL for the 2HDM+a model as a function of $\sin \theta$ for $m_{A,H^{\pm},H}$= 1000GeV, $m_a$ = 350GeV, $\tan \beta$ = 1.0$.
Breakdown of the dominant systematic uncertainties.
Event yields in the range of 120 $<m_{\gamma\gamma}<$ 130 GeV for data, signal models, the SM Higgs boson background and non-resonant background in each analysis category, for an integrated luminosity of $139$fb$^{-1}$.
Detailed background contributions from the SM Higgs boson and continuum background for each cut
Detailed contributions from the signals for each cut.
Acceptance times efficiency for several signals in each category.
Measurements of both the inclusive and differential production cross sections of a top-quark-antiquark pair in association with a $Z$ boson ($t\bar{t}Z$) are presented. The measurements are performed by targeting final states with three or four isolated leptons (electrons or muons) and are based on $\sqrt{s} = 13$ TeV proton-proton collision data with an integrated luminosity of 139 fb$^{-1}$, recorded from 2015 to 2018 with the ATLAS detector at the CERN Large Hadron Collider. The inclusive cross section is measured to be $\sigma_{t\bar{t}Z} = 0.99 \pm 0.05$ (stat.) $\pm 0.08$ (syst.) pb, in agreement with the most precise theoretical predictions. The differential measurements are presented as a function of a number of kinematic variables which probe the kinematics of the $t\bar{t}Z$ system. Both absolute and normalised differential cross-section measurements are performed at particle and parton levels for specific fiducial volumes and are compared with theoretical predictions at different levels of precision, based on a $\chi^{2}/$ndf and $p$-value computation. Overall, good agreement is observed between the unfolded data and the predictions.
The measured $t\bar{t}\text{Z}$ cross-section value and its uncertainty based on the fit results from the combined trilepton and tetralepton channels. The value corresponds to the phase-space region where the difermion mass from the Z boson decay lies in the range $70 < m_{f\bar{f}} < 110$ GeV.
The measured $t\bar{t}\text{Z}$ cross-section value and its uncertainty based on the fit results from the combined trilepton and tetralepton channels. The value corresponds to the phase-space region where the difermion mass from the Z boson decay lies in the range $70 < m_{f\bar{f}} < 110$ GeV.
List of relative uncertainties of the measured inclusive $t\bar{t}\text{Z}$ cross section from the combined fit. The uncertainties are symmetrised for presentation and grouped into the categories described in the text. The quadratic sum of the individual uncertainties is not equal to the total uncertainty due to correlations introduced by the fit.
List of relative uncertainties of the measured inclusive $t\bar{t}\text{Z}$ cross section from the combined fit. The uncertainties are symmetrised for presentation and grouped into the categories described in the text. The quadratic sum of the individual uncertainties is not equal to the total uncertainty due to correlations introduced by the fit.
The definitions of the trilepton signal regions: for the inclusive measurement, a combination of the regions with pseudo-continuous $b$-tagging 3$\ell$-Z-1$b$4$j$-PCBT and 3$\ell$-Z-2$b$3$j$-PCBT is used, whereas for the differential measurement, only the region 3$\ell$-Z-2$b$3$j$, with a fixed $b$-tagging WP is employed.
The definitions of the trilepton signal regions: for the inclusive measurement, a combination of the regions with pseudo-continuous $b$-tagging 3$\ell$-Z-1$b$4$j$-PCBT and 3$\ell$-Z-2$b$3$j$-PCBT is used, whereas for the differential measurement, only the region 3$\ell$-Z-2$b$3$j$, with a fixed $b$-tagging WP is employed.
The definitions of the four tetralepton signal regions. The regions are defined to target different $b$-jet multiplicities and flavour combinations of the non-Z leptons.
The definitions of the four tetralepton signal regions. The regions are defined to target different $b$-jet multiplicities and flavour combinations of the non-Z leptons.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|$ in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 3$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 4$\ell$ channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel.
The total correlation matrix of the absolute parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel.
The total correlation matrix of the normalised parton-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 3$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 3$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 4$\ell$ channel.
The total correlation matrix of the absolute particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 4$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}$ of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the absolute value of rapidity of the $Z$ boson in the 3$\ell$+4$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{l \textrm{non-}Z}$ in the 3$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta y (Z, t_{\textrm{lep}})|/\pi$ in the 3$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 3$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 3$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (l_{t}^{+}, l_{\bar{t}}^{-})|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $|\Delta \phi (t\bar{t}, Z)|/\pi$ in the 4$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the $p_{\textrm{T}}^{t\bar{t}}$ in the 4$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 4$\ell$ channel.
The total correlation matrix of the normalised particle-level differential cross-section measured in the fiducial phase-space as a function of the number of jets in the 4$\ell$ channel.
A search for supersymmetry in events with four or more charged leptons (electrons, muons and $\tau$-leptons) is presented. The analysis uses a data sample corresponding to $139\,\mbox{fb\(^{-1}\)}$ of proton-proton collisions delivered by the Large Hadron Collider at $\sqrt{s}=13$ TeV and recorded by the ATLAS detector. Four-lepton signal regions with up to two hadronically decaying $\tau$-leptons are designed to target several supersymmetric models, while a general five-lepton signal region targets any new physics phenomena leading to a final state with five charged leptons. Data yields are consistent with Standard Model expectations and results are used to set upper limits on contributions from processes beyond the Standard Model. Exclusion limits are set at the 95% confidence level in simplified models of general gauge-mediated supersymmetry, excluding higgsino masses up to $540$ GeV. In $R$-parity-violating simplified models with decays of the lightest supersymmetric particle to charged leptons, lower limits of $1.6$ TeV, $1.2$ TeV, and $2.5$ TeV are placed on wino, slepton and gluino masses, respectively.
The $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution in SR0-ZZ$^{\mathrm{loose}}$ and SR0-ZZ$^{\mathrm{tight}}$ for events passing the signal region requirements except the $E_{\mathrm{T}}^{\mathrm{miss}}$ requirement. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band. The red arrows indicate the $E_{\mathrm{T}}^{\mathrm{miss}}$ selections in the signal regions.
The $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution in SR0-ZZ$_{\mathrm{bveto}}^{\mathrm{loose}}$ and SR0-ZZ$_{\mathrm{bveto}}^{\mathrm{tight}}$ for events passing the signal region requirements except the $E_{\mathrm{T}}^{\mathrm{miss}}$ requirement. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band. The red arrows indicate the $E_{\mathrm{T}}^{\mathrm{miss}}$ selections in the signal regions.
The $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution in SR5L. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The $m_{\mathrm{eff}}$ distribution in SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$ and SR0$_{\mathrm{bveto}}^{\mathrm{tight}}$ for events passing the signal region requirements except the $m_{\mathrm{eff}}$ requirement. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band. The red arrows indicate the $m_{\mathrm{eff}}$ selections in the signal regions.
The $m_{\mathrm{eff}}$ distribution in SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$ and SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$ for events passing the signal region requirements except the $m_{\mathrm{eff}}$ requirement. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band. The red arrows indicate the $m_{\mathrm{eff}}$ selections in the signal regions.
The $m_{\mathrm{eff}}$ distribution in SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$ and SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$ for events passing the signal region requirements except the $m_{\mathrm{eff}}$ requirement. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band. The red arrows indicate the $m_{\mathrm{eff}}$ selections in the signal regions.
The $m_{\mathrm{eff}}$ distribution in SR0$_{\mathrm{breq}}$ for events passing the signal region requirements except the $m_{\mathrm{eff}}$ requirement. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band. The red arrows indicate the $m_{\mathrm{eff}}$ selections in the signal regions.
The $m_{\mathrm{eff}}$ distribution in SR1$_{\mathrm{breq}}$ for events passing the signal region requirements except the $m_{\mathrm{eff}}$ requirement. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band. The red arrows indicate the $m_{\mathrm{eff}}$ selections in the signal regions.
The $m_{\mathrm{eff}}$ distribution in SR2$_{\mathrm{breq}}$ for events passing the signal region requirements except the $m_{\mathrm{eff}}$ requirement. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band. The red arrows indicate the $m_{\mathrm{eff}}$ selections in the signal regions.
Expected 95% CL exclusion limits on the higgsino GGM models. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ expected 95% CL exclusion limits on the higgsino GGM models. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ expected 95% CL exclusion limits on the higgsino GGM models. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Observed 95% CL exclusion limits on the higgsino GGM models. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ observed 95% CL exclusion limits on the higgsino GGM models. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ observed 95% CL exclusion limits on the higgsino GGM models. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Expected 95% CL exclusion limits on wino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ expected 95% CL exclusion limits on wino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ expected 95% CL exclusion limits on wino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Observed 95% CL exclusion limits on wino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ bserved 95% CL exclusion limits on wino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ observed 95% CL exclusion limits on wino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Expected 95% CL exclusion limits on wino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ expected 95% CL exclusion limits on wino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ expected 95% CL exclusion limits on wino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Observed 95% CL exclusion limits on wino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ observed 95% CL exclusion limits on wino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ observed 95% CL exclusion limits on wino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Expected 95% CL exclusion limits on slepton/sneutrino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ expected 95% CL exclusion limits on slepton/sneutrino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ expected 95% CL exclusion limits on slepton/sneutrino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Observed 95% CL exclusion limits on slepton/sneutrino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ observed 95% CL exclusion limits on slepton/sneutrino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ observed 95% CL exclusion limits on slepton/sneutrino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Expected 95% CL exclusion limits on slepton/sneutrino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ expected 95% CL exclusion limits on slepton/sneutrino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ expected 95% CL exclusion limits on slepton/sneutrino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Observed 95% CL exclusion limits on slepton/sneutrino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ observed 95% CL exclusion limits on slepton/sneutrino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ observed 95% CL exclusion limits on slepton/sneutrino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Expected 95% CL exclusion limits on gluino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ expected 95% CL exclusion limits on gluino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ expected 95% CL exclusion limits on gluino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Observed 95% CL exclusion limits on gluino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ observed 95% CL exclusion limits on gluino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ observed 95% CL exclusion limits on gluino NLSP pair production with RPV LSP decays via $\lambda_{12k}$, where $k \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Expected 95% CL exclusion limits on gluino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ expected 95% CL exclusion limits on gluino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ expected 95% CL exclusion limits on gluino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Observed 95% CL exclusion limits on gluino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$+1\sigma$ observed 95% CL exclusion limits on gluino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
$-1\sigma$ observed 95% CL exclusion limits on gluino NLSP pair production with RPV LSP decays via $\lambda_{i33}$, where $i \in{1,2}$. The limits are set using the statistical combination of disjoint signal regions. Where two (or more) signal regions overlap, the signal region contributing its observed $\mathrm{CL}_{\mathrm{s}}$ value to the combination is the one with the better (best) expected $\mathrm{CL}_{\mathrm{s}}$ value.
Observed upper limit on the signal cross section in fb for the wino NLSP models with RPV LSP decays via $\lambda_{12k}$ where $k \in{1,2}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Observed upper limit on the signal cross section in fb for the wino NLSP models with RPV LSP decays via $\lambda_{i33}$ where $i \in{1,2}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Observed upper limit on the signal cross section in fb for the slepton/sneutrino NLSP models with RPV LSP decays via $\lambda_{12k}$ where $k \in{1,2}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Observed upper limit on the signal cross section in fb for the slepton/sneutrino NLSP models with RPV LSP decays via $\lambda_{i33}$ where $i \in{1,2}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Observed upper limit on the signal cross section in fb for the gluino NLSP models with RPV LSP decays via $\lambda_{12k}$ where $k \in{1,2}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Observed upper limit on the signal cross section in fb for the gluino NLSP models with RPV LSP decays via $\lambda_{i33}$ where $i \in{1,2}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Observed upper limit on the signal cross section in fb for the higgsino GGM models. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Best expected SR for the wino NLSP models with RPV LSP decays via $\lambda_{12k}$ where $k \in{1,2}$. A value of 1 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, 2 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, 3 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, 4 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, and 5 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{tight}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$.
Best expected SR for the wino NLSP models with RPV LSP decays via $\lambda_{i33}$ where $i \in{1,2}$. A value of 1 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, 2 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, 3 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, 4 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, and 5 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{tight}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$.
Best expected SR for the slepton/sneutrino NLSP models with RPV LSP decays via $\lambda_{12k}$ where $k \in{1,2}$. A value of 1 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, 2 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, 3 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, 4 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, and 5 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{tight}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$.
Best expected SR for the slepton/sneutrino NLSP models with RPV LSP decays via $\lambda_{i33}$ where $i \in{1,2}$. A value of 1 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, 2 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, 3 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, 4 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, and 5 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{tight}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$.
Best expected SR for the gluino NLSP models with RPV LSP decays via $\lambda_{12k}$ where $k \in{1,2}$. A value of 1 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, 2 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, 3 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, 4 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, and 5 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{tight}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$.
Best expected SR for the gluino NLSP models with RPV LSP decays via $\lambda_{i33}$ where $i \in{1,2}$. A value of 1 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, 2 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, 3 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, 4 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, and 5 corresponds to SR0$_{\mathrm{bveto}}^{\mathrm{tight}}$SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$.
Best expected SR for the higgsino GGM models. A value of 6 corresponds to SR0-ZZ$^{\mathrm{loose}}$, 7 corresponds to SR0-ZZ$^{\mathrm{tight}}$, 8 corresponds to SR0-ZZ$^{\mathrm{loose}}_{\mathrm{bveto}}$, and 9 corresponds to SR0-ZZ$^{\mathrm{tight}}_{\mathrm{bveto}}$.
Acceptance across the wino NLSP $\lambda_{12k}\neq 0$ models for SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the wino NLSP $\lambda_{12k}\neq 0$ models for SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Acceptance across the wino NLSP $\lambda_{12k}\neq 0$ models for SR0$_{\mathrm{bveto}}^{\mathrm{tight}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the wino NLSP $\lambda_{12k}\neq 0$ models for SR0$_{\mathrm{bveto}}^{\mathrm{tight}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Acceptance across the wino NLSP $\lambda_{12k}\neq 0$ models for SR0$_{\mathrm{breq}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the wino NLSP $\lambda_{12k}\neq 0$ models for SR0$_{\mathrm{breq}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Acceptance across the wino NLSP $\lambda_{i33}\neq 0$ models for SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the wino NLSP $\lambda_{i33}\neq 0$ models for SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Acceptance across the wino NLSP $\lambda_{i33}\neq 0$ models for SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the wino NLSP $\lambda_{i33}\neq 0$ models for SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Acceptance across the wino NLSP $\lambda_{i33}\neq 0$ models for SR1$_{\mathrm{breq}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the wino NLSP $\lambda_{i33}\neq 0$ models for SR1$_{\mathrm{breq}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Acceptance across the wino NLSP $\lambda_{i33}\neq 0$ models for SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the wino NLSP $\lambda_{i33}\neq 0$ models for SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Acceptance across the wino NLSP $\lambda_{i33}\neq 0$ models for SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the wino NLSP $\lambda_{i33}\neq 0$ models for SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Acceptance across the wino NLSP $\lambda_{i33}\neq 0$ models for SR2$_{\mathrm{breq}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the wino NLSP $\lambda_{i33}\neq 0$ models for SR2$_{\mathrm{breq}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Acceptance across the GGM Higgsino grid for SR0-ZZ$^{\mathrm{loose}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the GGM Higgsino grid for SR0-ZZ$^{\mathrm{loose}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Acceptance across the GGM Higgsino grid for SR0-ZZ$^{\mathrm{tight}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the GGM Higgsino grid for SR0-ZZ$^{\mathrm{tight}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Acceptance across the GGM Higgsino grid for SR0-ZZ$_{\mathrm{bveto}}^{\mathrm{loose}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the GGM Higgsino grid for SR0-ZZ$_{\mathrm{bveto}}^{\mathrm{loose}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Acceptance across the GGM Higgsino grid for SR0-ZZ$_{\mathrm{bveto}}^{\mathrm{tight}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
Efficiency across the GGM Higgsino grid for SR0-ZZ$_{\mathrm{bveto}}^{\mathrm{tight}}$. The interpolation between signal scenarios studied is included for illustration purposes only and may be subject to interpolation effects in sparsely populated areas.
The $p_{\mathrm{T}}$ of the light leptons in distribution in SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The $p_{\mathrm{T}}$ of the light leptons in distribution in SR0-ZZ$^{\mathrm{loose}}$. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The $p_{\mathrm{T}}$ of the light leptons in distribution in SR0-ZZ$^{\mathrm{tight}}$. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The $p_{\mathrm{T}}$ of the light leptons in distribution in SR0-ZZ$_{\mathrm{bveto}}^{\mathrm{loose}}$. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The $p_{\mathrm{T}}$ of the light leptons in distribution in SR5L. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The $p_{\mathrm{T}}$ of the light leptons in distribution in SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The $p_{\mathrm{T}}$ of the taus leptons in distribution in SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The $p_{\mathrm{T}}$ of the light taus in distribution in SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The lepton flavour and multiplicities in events with four light leptons and a Z veto. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The lepton flavour and multiplicities in events with four light leptons and one Z candidate. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The lepton flavour and multiplicities in events with four light leptons and two Z candidates. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The lepton flavour and multiplicities in events with exactly five light leptons. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The lepton flavour and multiplicities in events with three light leptons and one tau and a Z veto. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The lepton flavour and multiplicities in events with three light leptons and one tau and one Z candidate. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The lepton flavour and multiplicities in events with two light leptons and two taus and a Z veto. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
The lepton flavour and multiplicities in events with two light leptons and two taus and one Z candidate. Distributions for data, the estimated SM backgrounds after the background-only fit, and an example SUSY scenario are shown. "Other" is the sum of the $tWZ$, $t\bar{t}WW$, $t\bar{t} ZZ$, $t\bar{t} WH$, $t\bar{t} HH$, $t\bar{t} tW$, and $t\bar{t}t\bar{t}$ backgrounds. The last bin captures the overflow events. The lower panel shows the ratio of the observed data to the expected SM background yield in each bin. Both the statistical and systematic uncertainties in the SM background are included in the shaded band.
Cutflow event yields in regions SR0$_{\mathrm{bveto}}^{\mathrm{loose}}$, SR0$_{\mathrm{bveto}}^{\mathrm{tight}}$, SR0$_{\mathrm{breq}}$, and SR5L for RPV models with the $\lambda_{12k}\neq 0$ coupling. All yields correspond to weighted events, so that effects from lepton reconstruction efficiencies, trigger corrections, pileup reweighting, etc., are included. They are normalized to the integrated luminosity of the data sample, $\int L dt = 139\,\mbox{fb\(^{-1}\)}$. The preliminary event reduction is a centralized stage where at least two electrons/muons with uncalibrated $p_{\mathrm{T}} >$ 9 GeV are required.
Cutflow event yields in regions SR1$_{\mathrm{bveto}}^{\mathrm{loose}}$, SR1$_{\mathrm{bveto}}^{\mathrm{tight}}$, and SR1$_{\mathrm{breq}}$ for RPV models with the $\lambda_{i33}\neq 0$ coupling. All yields correspond to weighted events, so that effects from lepton reconstruction efficiencies, trigger corrections, pileup reweighting, etc., are included. They are normalized to the integrated luminosity of the data sample, $\int L dt = 139\,\mbox{fb\(^{-1}\)}$. The preliminary event reduction is a centralized stage where at least two electrons/muons with uncalibrated $p_{\mathrm{T}} >$ 9 GeV are required.
Cutflow event yields in regions SR2$_{\mathrm{bveto}}^{\mathrm{loose}}$, SR2$_{\mathrm{bveto}}^{\mathrm{tight}}$, and SR2$_{\mathrm{breq}}$ for RPV models with the $\lambda_{i33}\neq 0$ coupling. All yields correspond to weighted events, so that effects from lepton reconstruction efficiencies, trigger corrections, pileup reweighting, etc., are included. They are normalized to the integrated luminosity of the data sample, $\int L dt = 139\,\mbox{fb\(^{-1}\)}$. The preliminary event reduction is a centralized stage where at least two electrons/muons with uncalibrated $p_{\mathrm{T}} >$ 9 GeV are required.
Cutflow event yields in regions SR0-ZZ$^{\mathrm{loose}}$, SR0-ZZ$^{\mathrm{tight}}$, SR0-ZZ$_{\mathrm{bveto}}^{\mathrm{loose}}$, SR0-ZZ$_{\mathrm{bveto}}^{\mathrm{tight}}$, and SR5L the higgsino GGM RPC model with BR($\tilde{\chi}^{0}_1 \rightarrow Z \tilde{G}$) = 50% and higgsino masses of 200 GeV, or BR($\tilde{\chi}^{0}_1 \rightarrow Z \tilde{G}$) = 100% and higgsino masses of 300 GeV. All yields correspond to weighted events, so that effects from lepton reconstruction efficiencies, trigger corrections, pileup reweighting, etc., are included. They are normalized to the integrated luminosity of the data sample, $\int L dt = 139\,\mbox{fb\(^{-1}\)}$. The generator filter is a selection of $\geq$4e/$\mu$/$\tau_{\mathrm{had-vis}}$ leptons with $p_{\mathrm{T}}(e,\mu)>4$GeV, $p_{\mathrm{T}}(\tau_{\mathrm{had-vis}})>15$GeV and $|\eta|<2.8$ and is applied during the MC generation of the simulated events. The preliminary event reduction is a centralized stage where at least two electrons/muons with uncalibrated $p_{\mathrm{T}} > 9$ GeV are required.
Electroweak symmetry breaking explains the origin of the masses of elementary particles through their interactions with the Higgs field. Besides the measurements of the Higgs boson properties, the study of the scattering of massive vector bosons with spin one allows the nature of electroweak symmetry breaking to be probed. Among all processes related to vector-boson scattering, the electroweak production of two jets and a $Z$-boson pair is a rare and important one. Here we report the observation of this process from proton-proton collision data corresponding to an integrated luminosity of 139/fb recorded at a centre-of-mass energy of 13 TeV with the ATLAS detector at the Large Hadron Collider. We consider two different final states originating from the decays of the $Z$-boson pair - one containing four charged leptons and the other containing two charged leptons and two neutrinos. The hypothesis of no electroweak production is rejected with a statistical significance of 5.7 $\sigma$, and the measured cross-section for electroweak production is consistent with the standard model prediction. In addition, we report cross-sections for inclusive production of a $Z$-boson pair and two jets for the two final states.
Signal strength and significance of EW ZZjj processes
Measured and predicted fiducial cross-sections in both the lllljj and ll$\nu\nu$jj channels for the inclusive ZZjj processes. Uncertainties due to different sources are presented
Signal strength and significance of EW ZZjj processes
Measured and predicted fiducial cross-sections in both the lllljj and ll$\nu\nu$jj channels for the inclusive ZZjj processes. Uncertainties due to different sources are presented.
Measured and predicted fiducial cross-sections in both the lllljj and ll$\nu\nu$jj channels for the inclusive ZZjj processes. Uncertainties due to different sources are presented.
Observed and expected multivariate discriminant distribution in the $\ell\ell\ell\ell jj$ QCD CR.
Observed and expected multivariate discriminant distribution in the $\ell\ell\ell\ell jj$ QCD CR.
Observed and expected multivariate discriminant distribution in the $\ell\ell\ell\ell jj$ SR.
Observed and expected multivariate discriminant distribution in the $\ell\ell\ell\ell jj$ SR.
Observed and expected multivariate discriminant distribution in the $\ell\ell\nu\nu jj$ SR.
Observed and expected multivariate discriminant distribution in the $\ell\ell\nu\nu jj$ SR.
Combined ATLAS and CMS measurements of the Higgs boson production and decay rates, as well as constraints on its couplings to vector bosons and fermions, are presented. The combination is based on the analysis of five production processes, namely gluon fusion, vector boson fusion, and associated production with a $W$ or a $Z$ boson or a pair of top quarks, and of the six decay modes $H \to ZZ, WW$, $\gamma\gamma, \tau\tau, bb$, and $\mu\mu$. All results are reported assuming a value of 125.09 GeV for the Higgs boson mass, the result of the combined measurement by the ATLAS and CMS experiments. The analysis uses the CERN LHC proton--proton collision data recorded by the ATLAS and CMS experiments in 2011 and 2012, corresponding to integrated luminosities per experiment of approximately 5 fb$^{-1}$ at $\sqrt{s}=7$ TeV and 20 fb$^{-1}$ at $\sqrt{s} = 8$ TeV. The Higgs boson production and decay rates measured by the two experiments are combined within the context of three generic parameterisations: two based on cross sections and branching fractions, and one on ratios of coupling modifiers. Several interpretations of the measurements with more model-dependent parameterisations are also given. The combined signal yield relative to the Standard Model prediction is measured to be 1.09 $\pm$ 0.11. The combined measurements lead to observed significances for the vector boson fusion production process and for the $H \to \tau\tau$ decay of $5.4$ and $5.5$ standard deviations, respectively. The data are consistent with the Standard Model predictions for all parameterisations considered.
Best fit values of $\sigma_i \cdot \mathrm{B}^f$ for each specific channel $i \to H\to f$, as obtained from the generic parameterisation with 23 parameters for the combination of the ATLAS and CMS measurements, using the $\sqrt{s}$=7 and 8 TeV data. The cross sections are given for $\sqrt{s}$=8 TeV, assuming the SM values for $\sigma_i(7 \mathrm{TeV})/\sigma_i(8 \mathrm{TeV})$. The results are shown together with their total uncertainties and their breakdown into statistical and systematic components. The missing values are either not measured with a meaningful precision and therefore not quoted, in the case of the $H\to ZZ$ decay channel for the $WH$, $ZH$, and $ttH$ production processes, or not measured at all and therefore fixed to their corresponding SM predictions, in the case of the $H\to bb$ decay mode for the $gg\mathrm{F}$ and VBF production processes.
Best fit values of $\sigma_i \cdot \mathrm{B}^f$ relative to their SM prediction for each specific channel $i \to H\to f$, as obtained from the generic parameterisation with 23 parameters for the combination of the ATLAS and CMS measurements, using the $\sqrt{s}$=7 and 8 TeV data. The results are shown together with their total uncertainties and their breakdown into statistical and systematic components. The missing values are either not measured with a meaningful precision and therefore not quoted, in the case of the $H\to ZZ$ decay channel for the $WH$, $ZH$, and $ttH$ production processes, or not measured at all and therefore fixed to their corresponding SM predictions, in the case of the $H\to bb$ decay mode for the $gg\mathrm{F}$ and VBF production processes.
Best fit values of $\sigma(gg\to H\to ZZ)$, $\sigma_i/\sigma_{gg\mathrm{F}}$, and $\mathrm{B}^f/\mathrm{B}^{ZZ}$ from the combined analysis of the $\sqrt{s}$=7 and 8 TeV data. The values involving cross sections are given for $\sqrt{s}$=8 TeV, assuming the SM values for $\sigma_i(7 \mathrm{TeV})/\sigma_i(8 \mathrm{TeV})$. The results are shown for the combination of ATLAS and CMS, and also separately for each experiment, together with their total uncertainties and their breakdown into the four components described in the text. The expected uncertainties in the measurements are also shown.
Best fit values of $\sigma(gg\to H\to ZZ)$, $\sigma_i/\sigma_{gg\mathrm{F}}$, and $\mathrm{B}^f/\mathrm{B}^{ZZ}$ relative to their SM prediction from the combined analysis of the $\sqrt{s}$=7 and 8 TeV data. The results are shown for the combination of ATLAS and CMS, and also separately for each experiment, together with their total uncertainties and their breakdown into the four components described in the text. The expected uncertainties in the measurements are also shown.
Best fit values of $\sigma(gg\to H\to WW)$, $\sigma_i/\sigma_{gg\mathrm{F}}$, and $\mathrm{B}^f/\mathrm{B}^{WW}$ from the combined analysis of the $\sqrt{s}$=7 and 8 TeV data. The values involving cross sections are given for $\sqrt{s}$=8 TeV, assuming the SM values for $\sigma_i(7 \mathrm{TeV})/\sigma_i(8 \mathrm{TeV})$. The results are shown for the combination of ATLAS and CMS, and also separately for each experiment, together with their total uncertainties and their breakdown into the four components described in the text. The expected uncertainties in the measurements are also shown.
Best fit values of $\sigma(gg\to H\to WW)$, $\sigma_i/\sigma_{gg\mathrm{F}}$, and $\mathrm{B}^f/\mathrm{B}^{WW}$ relative to their SM prediction from the combined analysis of the $\sqrt{s}$=7 and 8 TeV data. The results are shown for the combination of ATLAS and CMS, and also separately for each experiment, together with their total uncertainties and their breakdown into the four components described in the text. The expected uncertainties in the measurements are also shown.
Best fit values of $\kappa_{gZ}= \kappa_{g}\cdot\kappa_{Z} / \kappa_{H}$ and of the ratios of coupling modifiers, as defined in the most generic parameterisation described in the context of the $\kappa$ framework, from the combined analysis of the $\sqrt{s}$=7 and 8 TeV data. The results are shown for the combination of ATLAS and CMS and also separately for each experiment, together with their total uncertainties and their breakdown into the four components described in the text. The uncertainties in $\lambda_{tg}$ and $\lambda_{WZ}$, for which a negative solution is allowed, are calculated around the overall best fit value. The expected total uncertainties in the measurements are also shown. For those parameters with no sensitivity to the sign, only the absolute values are shown.
Measured global signal strength $\mu$ and its total uncertainty, together with the breakdown of the uncertainty into its four components as defined in the text. The results are shown for the combination of ATLAS and CMS, and separately for each experiment. The expected uncertainty, with its breakdown, is also shown.
Measured signal strengths $\mu$ and their total uncertainties for different Higgs boson production processes. The results are shown for the combination of ATLAS and CMS, and separately for each experiment, for the combined $\sqrt{s}$=7 and 8 TeV data. The expected uncertainties in the measurements are also displayed. These results are obtained assuming that the Higgs boson branching fractions are the same as in the SM.
Measured signal strengths $\mu$ and their total uncertainties for different Higgs boson decay channels. The results are shown for the combination of ATLAS and CMS, and separately for each experiment, for the combined $\sqrt{s}$=7 and 8 TeV data. The expected uncertainties in the measurements are also displayed. These results are obtained assuming that the Higgs boson production process cross sections at $\sqrt{s}$ = 7 and 8 TeV are the same as in the SM.
Results of the ten-parameter fit of $\mu_F^f = \mu_{gg\mathrm{F}+ttH}^f$ and $\mu_V^f = \mu_{\mathrm{VBF}+VH}^f$ for each of the five decay channels. The results are shown for the combination of ATLAS and CMS, together with their measured and expected uncertainties. The measured results are also shown separately for each experiment.
Results of the six-parameter fit of the global ratio $\mu_V/\mu_F = \mu_{\mathrm{VBF}+VH}/\mu_{gg\mathrm{F}+ttH}$ together with $\mu_F^f$ for each of the five decay channels. The results are shown for the combination of ATLAS and CMS, together with their measured and expected uncertainties. The measured results are also shown separately for each experiment.
Fit results allowing BSM loop couplings, assuming that $|\kappa_{V}| \le$ 1, where $\kappa_{V}$ denotes $\kappa_{Z}$ or $\kappa_{W}$, and that $\mathrm{B_{BSM}} \ge$ 0. The results for the combination of ATLAS and CMS are reported with their measured and expected uncertainties. Also shown are the results from each experiment. For the parameters with both signs allowed, the other 1$\sigma$ interval is shown on a second line. For those parameters with no sensitivity to the sign, only the absolute values are shown.
Fit results allowing BSM loop couplings, assuming that there are no additional BSM contributions to the Higgs boson width, i.e. $\mathrm{B_{BSM}}=0$. The results for the combination of ATLAS and CMS are reported with their measured and expected uncertainties. Also shown are the results from each experiment. For the parameters with both signs allowed, the other 1$\sigma$ interval is shown on a second line. When a parameter is constrained and reaches a boundary, namely $\mathrm{B_{BSM}}$ = 0, the uncertainty is not indicated. For those parameters with no sensitivity to the sign, only the absolute values are shown.
Fit results for the parameterisation assuming the absence of BSM particles in the loops ($\mathrm{B_{BSM}}$=0). The results with their measured and expected uncertainties are reported for the combination of ATLAS and CMS, together with the individual results from each experiment. For the parameters with both signs allowed, the other 1$\sigma$ CL interval is shown on a second line. When a parameter is constrained and reaches a boundary, namely $|\kappa_\mu|$ = 0, the uncertainty is not indicated. For those parameters with no sensitivity to the sign, only the absolute values are shown.
Summary of fit results for a parameterisation probing the ratios of coupling modifiers for up-type versus down-type fermions. The results for the combination of ATLAS and CMS are reported together with their measured and expected uncertainties. Also shown are the results from each experiment. The parameter $\kappa_{uu}$ is positive definite since $\kappa_H$ is always assumed to be positive. For the parameter $\lambda_{du}$, for which both signs are allowed, the other 1$\sigma$ CL interval is shown on a second line. Negative values for the parameter $\lambda_{Vu}$ are excluded by more than 4$\sigma$.
Summary of fit results for a parameterisation probing the ratios of coupling modifiers for leptons versus quarks. The results for the combination of ATLAS and CMS are reported together with their measured and expected uncertainties. Also shown are the results from each experiment. The parameter $\kappa_{qq}$ is positive definite since $\kappa_H$ is always assumed to be positive. For the parameter $\lambda_{lq}$, for which there is no sensitivity to the sign, only the absolute values are shown. Negative values for the parameter $\lambda_{Vq}$ are excluded by more than 4$\sigma$.
Correlation matrix obtained from the fit combining the ATLAS and CMS data using the generic parameterisation with 23 parameters, $\sigma_i\cdot\mathrm{B}^f$ for each specific channel $i\to H\to f$. Only 20 parameters are shown because the other three, corresponding to the $H\to ZZ$ decay channel for the $WH$, $ZH$, and $ttH$ production processes, are not measured with a meaningful precision.
Correlation matrix obtained from the fit combining the ATLAS and CMS data using the generic parameterisation with nine parameters, $\sigma(gg\to H\to ZZ)$, $\sigma_i/\sigma_{gg\mathrm{F}}$, and $\mathrm{B}^f/\mathrm{B}^{ZZ}$.
Correlation matrix obtained from the fit combining the ATLAS and CMS data using the generic parameterisation with seven parameters, $\kappa_{gZ}=\kappa_{g}\cdot\kappa_{Z} / \kappa_{H}$ and the ratios of coupling modifiers.
Expected correlation matrix obtained from the fit combining ATLAS and CMS pre-fit Asimov data sets using the generic parameterisation with 23 parameters, $\sigma_i\cdot\mathrm{B}^f$ for each specific channel $i\to H\to f$. Only 20 parameters are shown because the other three, corresponding to the $H\to ZZ$ decay channel for the $WH$, $ZH$, and $ttH$ production processes, are not measured with a meaningful precision.
Expected correlation matrix obtained from the fit combining ATLAS and CMS pre-fit Asimov data sets using the generic parameterisation with nine parameters, $\sigma(gg\to H\to ZZ)$, $\sigma_i/\sigma_{gg\mathrm{F}}$, and $\mathrm{B}^f/\mathrm{B}^{ZZ}$.
Expected correlation matrix obtained from the fit combining ATLAS and CMS pre-fit Asimov data sets using the generic parameterisation with seven parameters, $\kappa_{gZ}=\kappa_{g}\cdot\kappa_{Z} / \kappa_{H}$ and the ratios of coupling modifiers.
ATLAS+CMS combined best-fit and 68% and 95% CL negative log-likelihood contours in the ($\kappa_{g}$,$\kappa_{\gamma}$) plane.
ATLAS best-fit and 68% and 95% CL negative log-likelihood contours in the ($\kappa_{g}$,$\kappa_{\gamma}$) plane.
CMS best-fit and 68% and 95% CL negative log-likelihood contours in the ($\kappa_{g}$,$\kappa_{\gamma}$) plane.
Best-fit and 68% and 95% CL negative log-likelihood contours in the ($\kappa_{F}$,$\kappa_{V}$) plane.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow\gamma\gamma$ channel.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow ZZ$ channel.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow WW$ channel.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow\tau\tau$ channel.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow bb$ channel.
ATLAS best-fit and 68% and 95% CL negative log-likelihood contours in the ($\kappa_{F}$,$\kappa_{V}$) plane.
CMS best-fit and 68% and 95% CL negative log-likelihood contours in the ($\kappa_{F}$,$\kappa_{V}$) plane.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow\gamma\gamma$ channel, assuming $\kappa_{F}>0$.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow ZZ$ channel, assuming $\kappa_{F}>0$.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow WW$ channel, assuming $\kappa_{F}>0$.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow\tau\tau$ channel, assuming $\kappa_{F}>0$.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow bb$ channel, assuming $\kappa_{F}>0$.
Best-fit and 68% and 95% CL negative log-likelihood contours in the ($\mu^{f}_{gg\mathrm{F}+ttH}$,$\mu^{f}_{\mathrm{VBF}+VH}$) plane for the $H\rightarrow\gamma\gamma$ channel.
Best-fit and 68% and 95% CL negative log-likelihood contours in the ($\mu^{f}_{gg\mathrm{F}+ttH}$,$\mu^{f}_{\mathrm{VBF}+VH}$) plane for the $H\rightarrow ZZ$ channel.
Best-fit and 68% and 95% CL negative log-likelihood contours in the ($\mu^{f}_{gg\mathrm{F}+ttH}$,$\mu^{f}_{\mathrm{VBF}+VH}$) plane for the $H\rightarrow WW$ channel.
Best-fit and 68% and 95% CL negative log-likelihood contours in the ($\mu^{f}_{gg\mathrm{F}+ttH}$,$\mu^{f}_{\mathrm{VBF}+VH}$) plane for the $H\rightarrow\tau\tau$ channel.
Best-fit and 68% and 95% CL negative log-likelihood contours in the ($\mu^{f}_{gg\mathrm{F}+ttH}$,$\mu^{f}_{\mathrm{VBF}+VH}$) plane for the $H\rightarrow bb$ channel.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But sometimes you may wish to be more specific. Here we show you how.
Guidance on the query string syntax can also be found in the OpenSearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.