Showing 10 of 470 results
Combined ATLAS and CMS measurements of the Higgs boson production and decay rates, as well as constraints on its couplings to vector bosons and fermions, are presented. The combination is based on the analysis of five production processes, namely gluon fusion, vector boson fusion, and associated production with a $W$ or a $Z$ boson or a pair of top quarks, and of the six decay modes $H \to ZZ, WW$, $\gamma\gamma, \tau\tau, bb$, and $\mu\mu$. All results are reported assuming a value of 125.09 GeV for the Higgs boson mass, the result of the combined measurement by the ATLAS and CMS experiments. The analysis uses the CERN LHC proton--proton collision data recorded by the ATLAS and CMS experiments in 2011 and 2012, corresponding to integrated luminosities per experiment of approximately 5 fb$^{-1}$ at $\sqrt{s}=7$ TeV and 20 fb$^{-1}$ at $\sqrt{s} = 8$ TeV. The Higgs boson production and decay rates measured by the two experiments are combined within the context of three generic parameterisations: two based on cross sections and branching fractions, and one on ratios of coupling modifiers. Several interpretations of the measurements with more model-dependent parameterisations are also given. The combined signal yield relative to the Standard Model prediction is measured to be 1.09 $\pm$ 0.11. The combined measurements lead to observed significances for the vector boson fusion production process and for the $H \to \tau\tau$ decay of $5.4$ and $5.5$ standard deviations, respectively. The data are consistent with the Standard Model predictions for all parameterisations considered.
Best fit values of $\sigma_i \cdot \mathrm{B}^f$ for each specific channel $i \to H\to f$, as obtained from the generic parameterisation with 23 parameters for the combination of the ATLAS and CMS measurements, using the $\sqrt{s}$=7 and 8 TeV data. The cross sections are given for $\sqrt{s}$=8 TeV, assuming the SM values for $\sigma_i(7 \mathrm{TeV})/\sigma_i(8 \mathrm{TeV})$. The results are shown together with their total uncertainties and their breakdown into statistical and systematic components. The missing values are either not measured with a meaningful precision and therefore not quoted, in the case of the $H\to ZZ$ decay channel for the $WH$, $ZH$, and $ttH$ production processes, or not measured at all and therefore fixed to their corresponding SM predictions, in the case of the $H\to bb$ decay mode for the $gg\mathrm{F}$ and VBF production processes.
Best fit values of $\sigma_i \cdot \mathrm{B}^f$ relative to their SM prediction for each specific channel $i \to H\to f$, as obtained from the generic parameterisation with 23 parameters for the combination of the ATLAS and CMS measurements, using the $\sqrt{s}$=7 and 8 TeV data. The results are shown together with their total uncertainties and their breakdown into statistical and systematic components. The missing values are either not measured with a meaningful precision and therefore not quoted, in the case of the $H\to ZZ$ decay channel for the $WH$, $ZH$, and $ttH$ production processes, or not measured at all and therefore fixed to their corresponding SM predictions, in the case of the $H\to bb$ decay mode for the $gg\mathrm{F}$ and VBF production processes.
Best fit values of $\sigma(gg\to H\to ZZ)$, $\sigma_i/\sigma_{gg\mathrm{F}}$, and $\mathrm{B}^f/\mathrm{B}^{ZZ}$ from the combined analysis of the $\sqrt{s}$=7 and 8 TeV data. The values involving cross sections are given for $\sqrt{s}$=8 TeV, assuming the SM values for $\sigma_i(7 \mathrm{TeV})/\sigma_i(8 \mathrm{TeV})$. The results are shown for the combination of ATLAS and CMS, and also separately for each experiment, together with their total uncertainties and their breakdown into the four components described in the text. The expected uncertainties in the measurements are also shown.
Best fit values of $\sigma(gg\to H\to ZZ)$, $\sigma_i/\sigma_{gg\mathrm{F}}$, and $\mathrm{B}^f/\mathrm{B}^{ZZ}$ relative to their SM prediction from the combined analysis of the $\sqrt{s}$=7 and 8 TeV data. The results are shown for the combination of ATLAS and CMS, and also separately for each experiment, together with their total uncertainties and their breakdown into the four components described in the text. The expected uncertainties in the measurements are also shown.
Best fit values of $\sigma(gg\to H\to WW)$, $\sigma_i/\sigma_{gg\mathrm{F}}$, and $\mathrm{B}^f/\mathrm{B}^{WW}$ from the combined analysis of the $\sqrt{s}$=7 and 8 TeV data. The values involving cross sections are given for $\sqrt{s}$=8 TeV, assuming the SM values for $\sigma_i(7 \mathrm{TeV})/\sigma_i(8 \mathrm{TeV})$. The results are shown for the combination of ATLAS and CMS, and also separately for each experiment, together with their total uncertainties and their breakdown into the four components described in the text. The expected uncertainties in the measurements are also shown.
Best fit values of $\sigma(gg\to H\to WW)$, $\sigma_i/\sigma_{gg\mathrm{F}}$, and $\mathrm{B}^f/\mathrm{B}^{WW}$ relative to their SM prediction from the combined analysis of the $\sqrt{s}$=7 and 8 TeV data. The results are shown for the combination of ATLAS and CMS, and also separately for each experiment, together with their total uncertainties and their breakdown into the four components described in the text. The expected uncertainties in the measurements are also shown.
Best fit values of $\kappa_{gZ}= \kappa_{g}\cdot\kappa_{Z} / \kappa_{H}$ and of the ratios of coupling modifiers, as defined in the most generic parameterisation described in the context of the $\kappa$ framework, from the combined analysis of the $\sqrt{s}$=7 and 8 TeV data. The results are shown for the combination of ATLAS and CMS and also separately for each experiment, together with their total uncertainties and their breakdown into the four components described in the text. The uncertainties in $\lambda_{tg}$ and $\lambda_{WZ}$, for which a negative solution is allowed, are calculated around the overall best fit value. The expected total uncertainties in the measurements are also shown. For those parameters with no sensitivity to the sign, only the absolute values are shown.
Measured global signal strength $\mu$ and its total uncertainty, together with the breakdown of the uncertainty into its four components as defined in the text. The results are shown for the combination of ATLAS and CMS, and separately for each experiment. The expected uncertainty, with its breakdown, is also shown.
Measured signal strengths $\mu$ and their total uncertainties for different Higgs boson production processes. The results are shown for the combination of ATLAS and CMS, and separately for each experiment, for the combined $\sqrt{s}$=7 and 8 TeV data. The expected uncertainties in the measurements are also displayed. These results are obtained assuming that the Higgs boson branching fractions are the same as in the SM.
Measured signal strengths $\mu$ and their total uncertainties for different Higgs boson decay channels. The results are shown for the combination of ATLAS and CMS, and separately for each experiment, for the combined $\sqrt{s}$=7 and 8 TeV data. The expected uncertainties in the measurements are also displayed. These results are obtained assuming that the Higgs boson production process cross sections at $\sqrt{s}$ = 7 and 8 TeV are the same as in the SM.
Results of the ten-parameter fit of $\mu_F^f = \mu_{gg\mathrm{F}+ttH}^f$ and $\mu_V^f = \mu_{\mathrm{VBF}+VH}^f$ for each of the five decay channels. The results are shown for the combination of ATLAS and CMS, together with their measured and expected uncertainties. The measured results are also shown separately for each experiment.
Results of the six-parameter fit of the global ratio $\mu_V/\mu_F = \mu_{\mathrm{VBF}+VH}/\mu_{gg\mathrm{F}+ttH}$ together with $\mu_F^f$ for each of the five decay channels. The results are shown for the combination of ATLAS and CMS, together with their measured and expected uncertainties. The measured results are also shown separately for each experiment.
Fit results allowing BSM loop couplings, assuming that $|\kappa_{V}| \le$ 1, where $\kappa_{V}$ denotes $\kappa_{Z}$ or $\kappa_{W}$, and that $\mathrm{B_{BSM}} \ge$ 0. The results for the combination of ATLAS and CMS are reported with their measured and expected uncertainties. Also shown are the results from each experiment. For the parameters with both signs allowed, the other 1$\sigma$ interval is shown on a second line. For those parameters with no sensitivity to the sign, only the absolute values are shown.
Fit results allowing BSM loop couplings, assuming that there are no additional BSM contributions to the Higgs boson width, i.e. $\mathrm{B_{BSM}}=0$. The results for the combination of ATLAS and CMS are reported with their measured and expected uncertainties. Also shown are the results from each experiment. For the parameters with both signs allowed, the other 1$\sigma$ interval is shown on a second line. When a parameter is constrained and reaches a boundary, namely $\mathrm{B_{BSM}}$ = 0, the uncertainty is not indicated. For those parameters with no sensitivity to the sign, only the absolute values are shown.
Fit results for the parameterisation assuming the absence of BSM particles in the loops ($\mathrm{B_{BSM}}$=0). The results with their measured and expected uncertainties are reported for the combination of ATLAS and CMS, together with the individual results from each experiment. For the parameters with both signs allowed, the other 1$\sigma$ CL interval is shown on a second line. When a parameter is constrained and reaches a boundary, namely $|\kappa_\mu|$ = 0, the uncertainty is not indicated. For those parameters with no sensitivity to the sign, only the absolute values are shown.
Summary of fit results for a parameterisation probing the ratios of coupling modifiers for up-type versus down-type fermions. The results for the combination of ATLAS and CMS are reported together with their measured and expected uncertainties. Also shown are the results from each experiment. The parameter $\kappa_{uu}$ is positive definite since $\kappa_H$ is always assumed to be positive. For the parameter $\lambda_{du}$, for which both signs are allowed, the other 1$\sigma$ CL interval is shown on a second line. Negative values for the parameter $\lambda_{Vu}$ are excluded by more than 4$\sigma$.
Summary of fit results for a parameterisation probing the ratios of coupling modifiers for leptons versus quarks. The results for the combination of ATLAS and CMS are reported together with their measured and expected uncertainties. Also shown are the results from each experiment. The parameter $\kappa_{qq}$ is positive definite since $\kappa_H$ is always assumed to be positive. For the parameter $\lambda_{lq}$, for which there is no sensitivity to the sign, only the absolute values are shown. Negative values for the parameter $\lambda_{Vq}$ are excluded by more than 4$\sigma$.
Correlation matrix obtained from the fit combining the ATLAS and CMS data using the generic parameterisation with 23 parameters, $\sigma_i\cdot\mathrm{B}^f$ for each specific channel $i\to H\to f$. Only 20 parameters are shown because the other three, corresponding to the $H\to ZZ$ decay channel for the $WH$, $ZH$, and $ttH$ production processes, are not measured with a meaningful precision.
Correlation matrix obtained from the fit combining the ATLAS and CMS data using the generic parameterisation with nine parameters, $\sigma(gg\to H\to ZZ)$, $\sigma_i/\sigma_{gg\mathrm{F}}$, and $\mathrm{B}^f/\mathrm{B}^{ZZ}$.
Correlation matrix obtained from the fit combining the ATLAS and CMS data using the generic parameterisation with seven parameters, $\kappa_{gZ}=\kappa_{g}\cdot\kappa_{Z} / \kappa_{H}$ and the ratios of coupling modifiers.
Expected correlation matrix obtained from the fit combining ATLAS and CMS pre-fit Asimov data sets using the generic parameterisation with 23 parameters, $\sigma_i\cdot\mathrm{B}^f$ for each specific channel $i\to H\to f$. Only 20 parameters are shown because the other three, corresponding to the $H\to ZZ$ decay channel for the $WH$, $ZH$, and $ttH$ production processes, are not measured with a meaningful precision.
Expected correlation matrix obtained from the fit combining ATLAS and CMS pre-fit Asimov data sets using the generic parameterisation with nine parameters, $\sigma(gg\to H\to ZZ)$, $\sigma_i/\sigma_{gg\mathrm{F}}$, and $\mathrm{B}^f/\mathrm{B}^{ZZ}$.
Expected correlation matrix obtained from the fit combining ATLAS and CMS pre-fit Asimov data sets using the generic parameterisation with seven parameters, $\kappa_{gZ}=\kappa_{g}\cdot\kappa_{Z} / \kappa_{H}$ and the ratios of coupling modifiers.
ATLAS+CMS combined best-fit and 68% and 95% CL negative log-likelihood contours in the ($\kappa_{g}$,$\kappa_{\gamma}$) plane.
ATLAS best-fit and 68% and 95% CL negative log-likelihood contours in the ($\kappa_{g}$,$\kappa_{\gamma}$) plane.
CMS best-fit and 68% and 95% CL negative log-likelihood contours in the ($\kappa_{g}$,$\kappa_{\gamma}$) plane.
Best-fit and 68% and 95% CL negative log-likelihood contours in the ($\kappa_{F}$,$\kappa_{V}$) plane.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow\gamma\gamma$ channel.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow ZZ$ channel.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow WW$ channel.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow\tau\tau$ channel.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow bb$ channel.
ATLAS best-fit and 68% and 95% CL negative log-likelihood contours in the ($\kappa_{F}$,$\kappa_{V}$) plane.
CMS best-fit and 68% and 95% CL negative log-likelihood contours in the ($\kappa_{F}$,$\kappa_{V}$) plane.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow\gamma\gamma$ channel, assuming $\kappa_{F}>0$.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow ZZ$ channel, assuming $\kappa_{F}>0$.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow WW$ channel, assuming $\kappa_{F}>0$.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow\tau\tau$ channel, assuming $\kappa_{F}>0$.
Best-fit and 68% CL negative log-likelihood contour in the ($\kappa_{F}$,$\kappa_{V}$) plane for the $H\rightarrow bb$ channel, assuming $\kappa_{F}>0$.
Best-fit and 68% and 95% CL negative log-likelihood contours in the ($\mu^{f}_{gg\mathrm{F}+ttH}$,$\mu^{f}_{\mathrm{VBF}+VH}$) plane for the $H\rightarrow\gamma\gamma$ channel.
Best-fit and 68% and 95% CL negative log-likelihood contours in the ($\mu^{f}_{gg\mathrm{F}+ttH}$,$\mu^{f}_{\mathrm{VBF}+VH}$) plane for the $H\rightarrow ZZ$ channel.
Best-fit and 68% and 95% CL negative log-likelihood contours in the ($\mu^{f}_{gg\mathrm{F}+ttH}$,$\mu^{f}_{\mathrm{VBF}+VH}$) plane for the $H\rightarrow WW$ channel.
Best-fit and 68% and 95% CL negative log-likelihood contours in the ($\mu^{f}_{gg\mathrm{F}+ttH}$,$\mu^{f}_{\mathrm{VBF}+VH}$) plane for the $H\rightarrow\tau\tau$ channel.
Best-fit and 68% and 95% CL negative log-likelihood contours in the ($\mu^{f}_{gg\mathrm{F}+ttH}$,$\mu^{f}_{\mathrm{VBF}+VH}$) plane for the $H\rightarrow bb$ channel.
The results of a search for gluino and squark pair production with the pairs decaying via the lightest charginos into a final state consisting of two $W$ bosons, the lightest neutralinos ($\tilde\chi^0_1$), and quarks, are presented. The signal is characterised by the presence of a single charged lepton ($e^{\pm}$ or $\mu^{\pm}$) from a $W$ boson decay, jets, and missing transverse momentum. The analysis is performed using 139 fb$^{-1}$ of proton-proton collision data taken at a centre-of-mass energy $\sqrt{s}=13$ TeV delivered by the Large Hadron Collider and recorded by the ATLAS experiment. No statistically significant excess of events above the Standard Model expectation is found. Limits are set on the direct production of squarks and gluinos in simplified models. Masses of gluino (squark) up to 2.2 TeV (1.4 TeV) are excluded at 95% confidence level for a light $\tilde\chi^0_1$.
Post-fit $m_{T}$ distribution in the SR 2J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Pre-fit $m_{eff}$ distribution in the TR6J control region. Uncertainties include statistical and systematic uncertainties (added in quadrature). The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Pre-fit $m_{eff}$ distribution in the WR6J control region. Uncertainties include statistical and systematic uncertainties (added in quadrature). The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the TR6J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the WR6J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step x = 1/2 model.
Post-fit $m_{eff}$ distribution in the 4J high-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Expected 95% CL exclusion contours for the gluino one-step x = 1/2 model. space.
Post-fit $m_{eff}$ distribution in the 6J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step variable-x
Post-fit $m_{eff}$ distribution in the 6J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Expected 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for the gluino one-step x = 1/2 model.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the gluino one-step x = 1/2 model. space.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Observed 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-step variable-x
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Expected 95% CL exclusion contours for the squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step x = 1/2
Expected 95% CL exclusion contours for the squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step variable-x
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Upper limits on the signal cross section for simplified model squark one-step x = 1/2
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Upper limits on the signal cross section for simplified model squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step x = 1/2
Upper limits on the signal cross section for simplified model squark one-step x=1/2 in one-flavour schemes
Upper limits on the signal cross section for simplified model gluino one-step variable-x
Upper limits on the signal cross section for simplified model squark one-step variable-x in one-flavour schemes
Upper limits on the signal cross section for simplified model squark one-step x = 1/2
Post-fit $m_{eff}$ distribution in the 2J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step variable-x
Post-fit $m_{eff}$ distribution in the 2J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step x=1/2 in one-flavour schemes
Post-fit $m_{eff}$ distribution in the 4J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step variable-x in one-flavour schemes
Post-fit $m_{eff}$ distribution in the 4J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the TR2J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-tag validation region. Uncertainties include statistical and systematic uncertainties.
Post-fit $m_{eff}$ distribution in the WR2J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-veto validation region. Uncertainties include statistical and systematic uncertainties.
Post-fit $m_{eff}$ distribution in the TR4J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR2JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the WR4J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR2JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 2J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR4JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 2J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR4JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 4J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR6JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 4J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR6JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 6J b-tag validation region. Uncertainties include statistical and systematic uncertainties.
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Post-fit $m_{eff}$ distribution in the 6J b-veto validation region. Uncertainties include statistical and systematic uncertainties.
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR2JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR2JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR4JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR4JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR6JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J discovery high region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR6JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J discovery high region for squark production one-step variable-x simplified models
Signal efficiency in SR2J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J discovery low region for squark production one-step variable-x simplified models
Signal efficiency in SR2J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
A search for charged leptons with large impact parameters using 139 fb$^{-1}$ of $\sqrt{s} = 13$ TeV $pp$ collision data from the ATLAS detector at the LHC is presented, addressing a long-standing gap in coverage of possible new physics signatures. Results are consistent with the background prediction. This search provides unique sensitivity to long-lived scalar supersymmetric lepton-partners (sleptons). For lifetimes of 0.1 ns, selectron, smuon and stau masses up to 720 GeV, 680 GeV, and 340 GeV are respectively excluded at 95% confidence level, drastically improving on the previous best limits from LEP.
Cutflow for SR-$ee$ for 5 representative signal points. For the following $\tilde{e}$ mass and lifetime points, the number of Monte Carlo events generated are: 24,000 for (100 GeV, 0.01 ns), 16,000 for (300 GeV, 1 ns), and 12,000 for (500 GeV, 0.1 ns). For the $\tilde{\tau}$ mass and lifetime points, the number of Monte Carlo events generated are: 30,000 for (200 GeV, 0.1 ns), and 104,000 for (300 GeV, 0.1 ns).
Cutflow for SR-$ee$ for 5 representative signal points. For the following $\tilde{e}$ mass and lifetime points, the number of Monte Carlo events generated are: 24,000 for (100 GeV, 0.01 ns), 16,000 for (300 GeV, 1 ns), and 12,000 for (500 GeV, 0.1 ns). For the $\tilde{\tau}$ mass and lifetime points, the number of Monte Carlo events generated are: 30,000 for (200 GeV, 0.1 ns), and 104,000 for (300 GeV, 0.1 ns).
Cutflow for SR-$e\mu$ for 2 representative signal points. For the $\tilde{\tau}$ mass and lifetime points, the number of Monte Carlo events generated are: 30,000 for (200 GeV, 0.1 ns), and 104,000 for (300 GeV, 0.1 ns).
Cutflow for SR-$e\mu$ for 2 representative signal points. For the $\tilde{\tau}$ mass and lifetime points, the number of Monte Carlo events generated are: 30,000 for (200 GeV, 0.1 ns), and 104,000 for (300 GeV, 0.1 ns).
Cutflow for SR-$\mu\mu$ for 5 representative signal points. For the following $\tilde{\mu}$ mass and lifetime points, the number of Monte Carlo events generated are: 24,000 for (100 GeV, 0.01 ns), 16,000 for (300 GeV, 1 ns), and 12,000 for (500 GeV, 0.1 ns). For the $\tilde{\tau}$ mass and lifetime points, the number of Monte Carlo events generated are: 30,000 for (200 GeV, 0.1 ns), and 104,000 for (300 GeV, 0.1 ns).
Cutflow for SR-$\mu\mu$ for 5 representative signal points. For the following $\tilde{\mu}$ mass and lifetime points, the number of Monte Carlo events generated are: 24,000 for (100 GeV, 0.01 ns), 16,000 for (300 GeV, 1 ns), and 12,000 for (500 GeV, 0.1 ns). For the $\tilde{\tau}$ mass and lifetime points, the number of Monte Carlo events generated are: 30,000 for (200 GeV, 0.1 ns), and 104,000 for (300 GeV, 0.1 ns).
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, where all slepton flavors are mass degenerate (co-NLSP).
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, where all slepton flavors are mass degenerate (co-NLSP).
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the selectron signal model. Selectron ($\tilde{e}_{L, R}$) refers to the scalar superpartners of left- and right-handed electrons.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the selectron signal model. Selectron ($\tilde{e}_{L, R}$) refers to the scalar superpartners of left- and right-handed electrons.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the superpartners of the left-handed electrons, $\tilde{e}_L$.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the superpartners of the left-handed electrons, $\tilde{e}_L$.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the superpartners of the right-handed electrons, $\tilde{e}_R$.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the superpartners of the right-handed electrons, $\tilde{e}_R$.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the smuon signal model. Smuon ($\tilde{\mu}_{L, R}$) refers to the scalar superpartners of left- and right-handed muons.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the smuon signal model. Smuon ($\tilde{\mu}_{L, R}$) refers to the scalar superpartners of left- and right-handed muons.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the superpartners of the left-handed muons, $\tilde{\mu}_L$.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the superpartners of the left-handed muons, $\tilde{\mu}_L$.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the superpartners of the right-handed muons, $\tilde{\mu}_R$.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the superpartners of the right-handed muons, $\tilde{\mu}_R$.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the stau signal model. Staus, $\tilde{\tau}_{1,2}$ are the mixed states of the superpartners of the left- and right-handed $\tau$ leptons, with mixing angle $\sin\theta_{\tilde\tau}=0.95$.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for the stau signal model. Staus, $\tilde{\tau}_{1,2}$ are the mixed states of the superpartners of the left- and right-handed $\tau$ leptons, with mixing angle $\sin\theta_{\tilde\tau}=0.95$.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for $\tilde{\tau}_L$ production, where $\tilde{\tau}_L$ is pure-state superpartner of the left-handed $\tau$.
Upper limits on observed signal cross section, $\sigma_\text{obs}^\text{95}$, for $\tilde{\tau}_L$ production, where $\tilde{\tau}_L$ is pure-state superpartner of the left-handed $\tau$.
The expected and observed yields in the signal regions. Combined statistical and systematic uncertainties are presented. Estimates are truncated at 0 if the size of measured systematic uncertainties would yield a negative result.
The expected and observed yields in the signal regions. Combined statistical and systematic uncertainties are presented. Estimates are truncated at 0 if the size of measured systematic uncertainties would yield a negative result.
Reconstruction efficiency as a function of $|d_{0}|$ and $p_\text{T}$ for signal electrons. Monte Carlo samples with $\tilde{e}$ or $\tilde{\mu}$ with mass 400 GeV and 1 ns lifetime were used. Efficiency is defined as the number of leptons passing all signal requirements and matched to generator-level muons divided by the number of generator level leptons with $p_\text{T} > 65$ GeV, $|d_{0}| >$ 3 mm, and |$\eta$| $<$ 2.47 for electrons. No event-level selections are made. Reconstructed leptons must pass all quality criteria, including the cosmic veto. Electron selection scale factors are included on the reconstructed leptons. The overflow is not shown in these plots.
Reconstruction efficiency as a function of $|d_{0}|$ and $p_\text{T}$ for signal electrons. Monte Carlo samples with $\tilde{e}$ or $\tilde{\mu}$ with mass 400 GeV and 1 ns lifetime were used. Efficiency is defined as the number of leptons passing all signal requirements and matched to generator-level muons divided by the number of generator level leptons with $p_\text{T} > 65$ GeV, $|d_{0}| >$ 3 mm, and |$\eta$| $<$ 2.47 for electrons. No event-level selections are made. Reconstructed leptons must pass all quality criteria, including the cosmic veto. Electron selection scale factors are included on the reconstructed leptons. The overflow is not shown in these plots.
Reconstruction efficiency as a function of $|d_{0}|$ and $p_\text{T}$ for signal muons. Monte Carlo samples with $\tilde{e}$ or $\tilde{\mu}$ with mass 400 GeV and 1 ns lifetime were used. Efficiency is defined as the number of leptons passing all signal requirements and matched to generator-level muons divided by the number of generator level leptons with $p_\text{T} > 65$ GeV, $|d_{0}| >$ 3 mm, and |$\eta$| $<$ 2.5 for muons. No event-level selections are made. Reconstructed leptons must pass all quality criteria, including the cosmic veto. Muon selection scale factors are included on the reconstructed leptons. The overflow is not shown in these plots.
Reconstruction efficiency as a function of $|d_{0}|$ and $p_\text{T}$ for signal muons. Monte Carlo samples with $\tilde{e}$ or $\tilde{\mu}$ with mass 400 GeV and 1 ns lifetime were used. Efficiency is defined as the number of leptons passing all signal requirements and matched to generator-level muons divided by the number of generator level leptons with $p_\text{T} > 65$ GeV, $|d_{0}| >$ 3 mm, and |$\eta$| $<$ 2.5 for muons. No event-level selections are made. Reconstructed leptons must pass all quality criteria, including the cosmic veto. Muon selection scale factors are included on the reconstructed leptons. The overflow is not shown in these plots.
Acceptance for $\tilde{e}$ of various masses and lifetimes in SR-$ee$. Acceptance is defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample. To be accepted, events are required to have at least 2 truth electrons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.47, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$.
Acceptance for $\tilde{e}$ of various masses and lifetimes in SR-$ee$. Acceptance is defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample. To be accepted, events are required to have at least 2 truth electrons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.47, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$.
Acceptance for $\tilde{\mu}$ of various masses and lifetimes in SR-$\mu\mu$. Acceptance is defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample. To be accepted, events are required to have at least 2 truth muons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$.
Acceptance for $\tilde{\mu}$ of various masses and lifetimes in SR-$\mu\mu$. Acceptance is defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample. To be accepted, events are required to have at least 2 truth muons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$.
Efficiency for $\tilde{e}$ of various masses and lifetimes in SR-$ee$. Efficiency is defined as the number of selected reconstruced events divided by the acceptance. To be accepted, events are required to have at least 2 truth electrons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.47, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. To be selected, events must satisfy all signal region requirements.
Efficiency for $\tilde{e}$ of various masses and lifetimes in SR-$ee$. Efficiency is defined as the number of selected reconstruced events divided by the acceptance. To be accepted, events are required to have at least 2 truth electrons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.47, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. To be selected, events must satisfy all signal region requirements.
Efficiency for $\tilde{\mu}$ of various masses and lifetimes in SR-$\mu\mu$. Efficiency is defined as the number of selected reconstruced events divided by the acceptance. To be accepted, events are required to have at least 2 truth muons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. To be selected, events must satisfy all signal region requirements.
Efficiency for $\tilde{\mu}$ of various masses and lifetimes in SR-$\mu\mu$. Efficiency is defined as the number of selected reconstruced events divided by the acceptance. To be accepted, events are required to have at least 2 truth muons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. To be selected, events must satisfy all signal region requirements.
Acceptance as a function of the generator-level $p_\text{T}$ of the leading and subleading lepton in SR-$ee$ from $\tilde{e}$ decays. The plot is made from signal Monte Carlo events with $\tilde{\ell}$ with mass of 400 GeV and lifetime of 1 ns. To be accepted, events are required to have at least 2 truth leptons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.47 for electrons, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. The overflow is not shown in these plots.
Acceptance as a function of the generator-level $p_\text{T}$ of the leading and subleading lepton in SR-$ee$ from $\tilde{e}$ decays. The plot is made from signal Monte Carlo events with $\tilde{\ell}$ with mass of 400 GeV and lifetime of 1 ns. To be accepted, events are required to have at least 2 truth leptons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.47 for electrons, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. The overflow is not shown in these plots.
Acceptance as a function of the generator-level $p_\text{T}$ of the leading and subleading lepton in SR-$\mu\mu$ from $\tilde{\mu}$ decays. The plot is made from signal Monte Carlo events with $\tilde{\ell}$ with mass of 400 GeV and lifetime of 1 ns. To be accepted, events are required to have at least 2 truth leptons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5 for muons, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. The overflow is not shown in these plots.
Acceptance as a function of the generator-level $p_\text{T}$ of the leading and subleading lepton in SR-$\mu\mu$ from $\tilde{\mu}$ decays. The plot is made from signal Monte Carlo events with $\tilde{\ell}$ with mass of 400 GeV and lifetime of 1 ns. To be accepted, events are required to have at least 2 truth leptons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5 for muons, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. The overflow is not shown in these plots.
Acceptance for $\tilde{\tau}$ of various masses and lifetimes in SR-$ee$. Acceptance is defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample. To be accepted, events are required to have at least 2 truth electrons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.47, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$.
Acceptance for $\tilde{\tau}$ of various masses and lifetimes in SR-$ee$. Acceptance is defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample. To be accepted, events are required to have at least 2 truth electrons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.47, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$.
Acceptance for $\tilde{\tau}$ of various masses and lifetimes in SR-$e\mu$. Acceptance is defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample. To be accepted, events are required to have at least 2 truth leptons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5 (2.47) for muons (electrons), $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$.
Acceptance for $\tilde{\tau}$ of various masses and lifetimes in SR-$e\mu$. Acceptance is defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample. To be accepted, events are required to have at least 2 truth leptons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5 (2.47) for muons (electrons), $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$.
Acceptance for $\tilde{\tau}$ of various masses and lifetimes in SR-$\mu\mu$. Acceptance is defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample. To be accepted, events are required to have at least 2 truth muons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$.
Acceptance for $\tilde{\tau}$ of various masses and lifetimes in SR-$\mu\mu$. Acceptance is defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample. To be accepted, events are required to have at least 2 truth muons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$.
Efficiency for $\tilde{\tau}$ of various masses and lifetimes in SR-$ee$. Efficiency is defined as the number of selected reconstruced events divided by the acceptance. To be accepted, events are required to have at least 2 truth electrons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.47, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. To be selected, events must satisfy all signal region requirements.
Efficiency for $\tilde{\tau}$ of various masses and lifetimes in SR-$ee$. Efficiency is defined as the number of selected reconstruced events divided by the acceptance. To be accepted, events are required to have at least 2 truth electrons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.47, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. To be selected, events must satisfy all signal region requirements.
Efficiency for $\tilde{\tau}$ of various masses and lifetimes in SR-$e\mu$. Efficiency is defined as the number of selected reconstruced events divided by the acceptance. To be accepted, events are required to have at least 2 truth leptons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5 (2.47) for muons (electrons), $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. To be selected, events must satisfy all signal region requirements.
Efficiency for $\tilde{\tau}$ of various masses and lifetimes in SR-$e\mu$. Efficiency is defined as the number of selected reconstruced events divided by the acceptance. To be accepted, events are required to have at least 2 truth leptons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5 (2.47) for muons (electrons), $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. To be selected, events must satisfy all signal region requirements.
Efficiency for $\tilde{\tau}$ of various masses and lifetimes in SR-$\mu\mu$. Efficiency is defined as the number of selected reconstruced events divided by the acceptance. To be accepted, events are required to have at least 2 truth muons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. To be selected, events must satisfy all signal region requirements.
Efficiency for $\tilde{\tau}$ of various masses and lifetimes in SR-$\mu\mu$. Efficiency is defined as the number of selected reconstruced events divided by the acceptance. To be accepted, events are required to have at least 2 truth muons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5, $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. To be selected, events must satisfy all signal region requirements.
Acceptance as a function of the generator-level $p_\text{T}$ of the leading and subleading lepton in SR-$e\mu$ from $\tilde{\tau}$ decays. The plot is made from signal Monte Carlo events with $\tilde{\ell}$ with mass of 400 GeV and lifetime of 1 ns. To be accepted, events are required to have at least 2 truth leptons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5 (2.47) for muons (electrons), $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. The overflow is not shown in these plots.
Acceptance as a function of the generator-level $p_\text{T}$ of the leading and subleading lepton in SR-$e\mu$ from $\tilde{\tau}$ decays. The plot is made from signal Monte Carlo events with $\tilde{\ell}$ with mass of 400 GeV and lifetime of 1 ns. To be accepted, events are required to have at least 2 truth leptons with $p_\text{T} > 65$ GeV, |$\eta$| $<$ 2.5 (2.47) for muons (electrons), $|d_{0}| > 3$ mm, and $\Delta R_{\ell\ell} > 0.2$. Events are also required to fall into one of the acceptance regions of the triggers used. At generator level, events must have one of the following: one electron with $p_\text{T} >$ 160 GeV, 2 electrons each with $p_\text{T} >$ 60 GeV, or 1 muon with $p_\text{T} >$ 60 GeV and $|\eta| < 1.07$. The overflow is not shown in these plots.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane where all slepton flavors and chiralities are mass degenerate.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane where all slepton flavors and chiralities are mass degenerate.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane where all slepton flavors and chiralities are mass degenerate.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane where all slepton flavors and chiralities are mass degenerate.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$ee$ targeting selectron production. Selectrons ($\tilde{e}_{L, R}$) refer to the scalar superpartners of left- and right-handed electrons, which are assumed to be mass degenerate.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$ee$ targeting selectron production. Selectrons ($\tilde{e}_{L, R}$) refer to the scalar superpartners of left- and right-handed electrons, which are assumed to be mass degenerate.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$ee$ targeting selectron production. Selectrons ($\tilde{e}_{L, R}$) refer to the scalar superpartners of left- and right-handed electrons, which are assumed to be mass degenerate.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$ee$ targeting selectron production. Selectrons ($\tilde{e}_{L, R}$) refer to the scalar superpartners of left- and right-handed electrons, which are assumed to be mass degenerate.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$ee$ targeting selectron production. Selectrons ($\tilde{e}_{L}$) refer to the scalar superpartners of left-handed electrons.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$ee$ targeting selectron production. Selectrons ($\tilde{e}_{L}$) refer to the scalar superpartners of left-handed electrons.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$ee$ targeting selectron production. Selectrons ($\tilde{e}_{L}$) refer to the scalar superpartners of left-handed electrons.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$ee$ targeting selectron production. Selectrons ($\tilde{e}_{L}$) refer to the scalar superpartners of left-handed electrons.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$ee$ targeting selectron production. Selectrons ($\tilde{e}_{R}$) refer to the scalar superpartners of right-handed electrons. Purple denotes the region excluded by LEP.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$ee$ targeting selectron production. Selectrons ($\tilde{e}_{R}$) refer to the scalar superpartners of right-handed electrons. Purple denotes the region excluded by LEP.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$ee$ targeting selectron production. Selectrons ($\tilde{e}_{R}$) refer to the scalar superpartners of right-handed electrons. Purple denotes the region excluded by LEP.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$ee$ targeting selectron production. Selectrons ($\tilde{e}_{R}$) refer to the scalar superpartners of right-handed electrons. Purple denotes the region excluded by LEP.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$\mu\mu$ targeting smuon production. Smuons ($\tilde{\mu}_{L, R}$) refer to the scalar superpartners of left- and right-handed muons, which are assumed to be mass degenerate.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$\mu\mu$ targeting smuon production. Smuons ($\tilde{\mu}_{L, R}$) refer to the scalar superpartners of left- and right-handed muons, which are assumed to be mass degenerate.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$\mu\mu$ targeting smuon production. Smuons ($\tilde{\mu}_{L, R}$) refer to the scalar superpartners of left- and right-handed muons, which are assumed to be mass degenerate.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$\mu\mu$ targeting smuon production. Smuons ($\tilde{\mu}_{L, R}$) refer to the scalar superpartners of left- and right-handed muons, which are assumed to be mass degenerate.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$\mu\mu$ targeting smuon production. Smuons ($\tilde{\mu}_{L}$) refer to the scalar superpartners of left-handed muons.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$\mu\mu$ targeting smuon production. Smuons ($\tilde{\mu}_{L}$) refer to the scalar superpartners of left-handed muons.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$\mu\mu$ targeting smuon production. Smuons ($\tilde{\mu}_{L}$) refer to the scalar superpartners of left-handed muons.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$\mu\mu$ targeting smuon production. Smuons ($\tilde{\mu}_{L}$) refer to the scalar superpartners of left-handed muons.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$\mu\mu$ targeting smuon production. Smuons ($\tilde{\mu}_{R}$) refer to the scalar superpartners of right-handed muons. Purple denotes the region excluded by LEP.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$\mu\mu$ targeting smuon production. Smuons ($\tilde{\mu}_{R}$) refer to the scalar superpartners of right-handed muons. Purple denotes the region excluded by LEP.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$\mu\mu$ targeting smuon production. Smuons ($\tilde{\mu}_{R}$) refer to the scalar superpartners of right-handed muons. Purple denotes the region excluded by LEP.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\ell})$ plane in SR-$\mu\mu$ targeting smuon production. Smuons ($\tilde{\mu}_{R}$) refer to the scalar superpartners of right-handed muons. Purple denotes the region excluded by LEP.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\tau})$ plane. Staus, $\tilde{\tau}_{1,2}$ are the mixed states of the superpartners of the left- and right-handed $\tau$ leptons, with mixing angle $\sin(\theta_{\tilde\tau})=0.95$, which are assumed to be mass degenerate.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\tau})$ plane. Staus, $\tilde{\tau}_{1,2}$ are the mixed states of the superpartners of the left- and right-handed $\tau$ leptons, with mixing angle $\sin(\theta_{\tilde\tau})=0.95$, which are assumed to be mass degenerate.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\tau})$ plane. Staus, $\tilde{\tau}_{1,2}$ are the mixed states of the superpartners of the left- and right-handed $\tau$ leptons, with mixing angle $\sin(\theta_{\tilde\tau})=0.95$, which are assumed to be mass degenerate.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\tau})$ plane. Staus, $\tilde{\tau}_{1,2}$ are the mixed states of the superpartners of the left- and right-handed $\tau$ leptons, with mixing angle $\sin(\theta_{\tilde\tau})=0.95$, which are assumed to be mass degenerate.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\tau}_L)$ plane, where $\tilde{\tau}_L$ is the pure-state super-partner of the left-handed $\tau$. Purple denotes the region excluded by LEP. This result does not present signficant sensitivity to the pure-state superpartner of the right-handed $\tau$.
Observed 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\tau}_L)$ plane, where $\tilde{\tau}_L$ is the pure-state super-partner of the left-handed $\tau$. Purple denotes the region excluded by LEP. This result does not present signficant sensitivity to the pure-state superpartner of the right-handed $\tau$.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\tau}_L)$ plane, where $\tilde{\tau}_L$ is the pure-state super-partner of the left-handed $\tau$. Purple denotes the region excluded by LEP. This result does not present signficant sensitivity to the pure-state superpartner of the right-handed $\tau$.
Expected 95% CL exclusion sensitivity. The limit is displayed in the lifetime vs. $m(\tilde{\tau}_L)$ plane, where $\tilde{\tau}_L$ is the pure-state super-partner of the left-handed $\tau$. Purple denotes the region excluded by LEP. This result does not present signficant sensitivity to the pure-state superpartner of the right-handed $\tau$.
A search for pair production of bottom squarks in events with hadronically decaying $\tau$-leptons, $b$-tagged jets and large missing transverse momentum is presented. The analyzed dataset is based on proton-proton collisions at $\sqrt{s}$ = 13 TeV delivered by the Large Hadron Collider and recorded by the ATLAS detector from 2015 to 2018, and corresponds to an integrated luminosity of 139 fb$^{-1}$. The observed data are compatible with the expected Standard Model background. Results are interpreted in a simplified model where each bottom squark is assumed to decay into the second-lightest neutralino $\tilde \chi_2^0$ and a bottom quark, with $\tilde \chi_2^0$ decaying into a Higgs boson and the lightest neutralino $\tilde \chi_1^0$. The search focuses on final states where at least one Higgs boson decays into a pair of hadronically decaying $\tau$-leptons. This allows the acceptance and thus the sensitivity to be significantly improved relative to the previous results at low masses of the $\tilde \chi_2^0$, where bottom-squark masses up to 850 GeV are excluded at the 95% confidence level, assuming a mass difference of 130 GeV between $\tilde \chi_2^0$ and $\tilde \chi_1^0$. Model-independent upper limits are also set on the cross section of processes beyond the Standard Model.
The expected exclusion contour at $95\%$ CL as a function of the M(Sbottom) vs. M(N2) with the $\Delta M$(N2,N1) = 130 GeV. Masses within the contour are excluded.
The observed exclusion contour at $95\%$ CL as a function of the M(Sbottom) vs. M(N2) with the $\Delta M$(N2,N1) = 130 GeV. Masses within the contour are excluded.
Acceptance in the Single-bin SR as a function of the M(Sbottom) vs. M(N2) with the $\Delta M$(N2,N1) = 130 GeV. Keep in mind that the acceptance is given in units of $10^{-4}$.
Efficiency in the Single-bin SR as a function of the M(Sbottom) vs. M(N2) with the $\Delta$ M(N2,N1) $= 130$ GeV. Keep in mind that the efficiency is given in units of $10^{-2}$.
Acceptance in the Multi-bin SR, $\min_{\Theta} < 0.5$ bin as a function of the M(Sbottom) vs. M(N2) with the $\Delta M$(N2,N1) = 130 GeV. Keep in mind that the acceptance is given in units of $10^{-4}$.
Efficiency in the Multi-bin SR, $\min_{\Theta} < 0.5$ bin as a function of the M(Sbottom) vs. M(N2) with the $\Delta M$(N2,N1) = 130 GeV. Keep in mind that the efficiency is given in units of $10^{-2}$.
Acceptance in the Multi-bin SR, $0.5 < \min_{\Theta} < 1.0$ bin as a function of the M(Sbottom) vs. M(N2) with the $\Delta M$(N2,N1) = 130 GeV. Keep in mind that the acceptance is given in units of $10^{-4}$.
Efficiency in the Multi-bin SR, $0.5 < \min_{\Theta} < 1.0$ bin as a function of the M(Sbottom) vs. M(N2) with the $\Delta M$(N2,N1) = 130 GeV. Keep in mind that the efficiency is given in units of $10^{-2}$.
Acceptance in the Multi-bin SR, $\min_{\Theta} > 1.0$ bin as a function of the M(Sbottom) vs. M(N2) with the $\Delta M$(N2,N1) = 130 GeV. Keep in mind that the acceptance is given in units of $10^{-4}$.
Efficiency in the Multi-bin SR, $\min_{\Theta} > 1.0$ bin as a function of the M(Sbottom) vs. M(N2) with the $\Delta M$(N2,N1) = 130 GeV. Keep in mind that the efficiency is given in units of $10^{-2}$.
Observed upper limits on the signal cross section as a function of the M(Sbottom) vs. M(N2) with the $\Delta M$(N2,N1) = 130 GeV.
Expected upper limits on the signal cross section as a function of the M(Sbottom) vs. M(N2) with the $\Delta M$(N2,N1) = 130 GeV.
Cutflows for the bechmarl signal point M(Sbottom) = 800 GeV, M(N2) = 180 GeV. Weighted event yields are reported starting with the "Preselection" line, normalized to an integrated luminosity of $139$ fb$^{−1}$.
Comparison of the expected and observed event yields in the signal regions. The top-quark and Z(mumu) background contributions are scaled with the normalization factors obtained from the background-only fit. The other contribution includes all the backgrounds not explicitly listed in the legend (V+jets except Z(mumu)+jets, di-/triboson, multijet). The hatched band indicates the total statistical and systematic uncertainties in the SM background. The contributions from three signal models to the signal regions are also displayed, where the masses M(Sbottom) and M(N2) are given in GeV in the legend. The lower panel shows the significance of the deviation of the observed yield from the expected background yield.
Dominant systematic uncertainties in the background prediction for the signal regions after the fit to the control regions. “Other” includes the uncertainties arising from muons, jet-vertex tagging, modeling of pile-up, the $E_{T}^{miss}$ computation, multijet background, and luminosity. The individual uncertainties can be correlated and do not necessarily add up quadratically to the total uncertainty.
Two-particle long-range azimuthal correlations are measured in photonuclear collisions using 1.7 nb$^{-1}$ of 5.02 TeV Pb+Pb collision data collected by the ATLAS experiment at the LHC. Candidate events are selected using a dedicated high-multiplicity photonuclear event trigger, a combination of information from the zero-degree calorimeters and forward calorimeters, and from pseudorapidity gaps constructed using calorimeter energy clusters and charged-particle tracks. Distributions of event properties are compared between data and Monte Carlo simulations of photonuclear processes. Two-particle correlation functions are formed using charged-particle tracks in the selected events, and a template-fitting method is employed to subtract the non-flow contribution to the correlation. Significant nonzero values of the second- and third-order flow coefficients are observed and presented as a function of charged-particle multiplicity and transverse momentum. The results are compared with flow coefficients obtained in proton-proton and proton-lead collisions in similar multiplicity ranges, and with theoretical expectations. The unique initial conditions present in this measurement provide a new way to probe the origin of the collective signatures previously observed only in hadronic collisions.
The measured $v_2$ and $v_3$ charged-particle anisotropies as a function of charged-particle multiplicity in photonuclear collisions
The measured $v_2$ and $v_3$ charged-particle anisotropies as a function of charged-particle transverse momentum in photonuclear collisions
The first evidence for the Higgs boson decay to a $Z$ boson and a photon is presented, with a statistical significance of 3.4 standard deviations. The result is derived from a combined analysis of the searches performed by the ATLAS and CMS Collaborations with proton-proton collision data sets collected at the CERN Large Hadron Collider (LHC) from 2015 to 2018. These correspond to integrated luminosities of around 140 fb$^{-1}$ for each experiment, at a center-of-mass energy of 13 TeV. The measured signal yield is $2.2\pm0.7$ times the Standard Model prediction, and agrees with the theoretical expectation within 1.9 standard deviations.
The negative profile log-likelihood test statistic, where $\Lambda$ represents the likelihood ratio, as a function of the signal strength $\mu$ derived from the ATLAS data, the CMS data, and the combined result.
A measurement of the cross section for the inclusive production of isolated prompt photons in pp collisions at a centre-of-mass energy sqrt(s) = 7TeV is presented. The measurement covers the pseudorapidity ranges |eta|<1.37 and 1.52<|eta|<1.81 in the transverse energy range 15 < E_T <100 GeV. The results are based on an integrated luminosity of 880 nb-1, collected with the ATLAS detector at the Large Hadron Collider. Photon candidates are identified by combining information from the calorimeters and from the inner tracker. Residual background in the selected sample is estimated from data based on the observed distribution of the transverse isolation energy in a narrow cone around the photon candidate. The results are compared to predictions from next-to-leading order perturbative QCD calculations.
The measured prompt photon cross section as a function of transverse energy for the |pseudorapidity| range < 0.6.
The measured prompt photon cross section as a function of transverse energy for the |pseudorapidity| range 0.6 to 1.37.
The measured prompt photon cross section as a function of transverse energy for the |pseudorapidity| range 1.52 to 1.81.
Jet shapes have been measured in inclusive jet production in proton-proton collisions at sqrt(s) = 7 TeV using 3 pb^{-1} of data recorded by the ATLAS experiment at the LHC. Jets are reconstructed using the anti-kt algorithm with transverse momentum 30 GeV < pT < 600 GeV and rapidity in the region |y| < 2.8. The data are corrected for detector effects and compared to several leading-order QCD matrix elements plus parton shower Monte Carlo predictions, including different sets of parameters tuned to model fragmentation processes and underlying event contributions in the final state. The measured jets become narrower with increasing jet transverse momentum and the jet shapes present a moderate jet rapidity dependence. Within QCD, the data test a variety of perturbative and non-perturbative effects. In particular, the data show sensitivity to the details of the parton shower, fragmentation, and underlying event models in the Monte Carlo generators. For an appropriate choice of the parameters used in these models, the data are well described.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 30 to 40 GeV and absolute values of the jet rapidity from 0 to 2.8.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 40 to 60 GeV and absolute values of the jet rapidity from 0 to 2.8.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 60 to 80 GeV and absolute values of the jet rapidity from 0 to 2.8.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 80 to 110 GeV and absolute values of the jet rapidity from 0 to 2.8.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 110 to 160 GeV and absolute values of the jet rapidity from 0 to 2.8.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 160 to 210 GeV and absolute values of the jet rapidity from 0 to 2.8.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 210 to 260 GeV and absolute values of the jet rapidity from 0 to 2.8.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 260 to 310 GeV and absolute values of the jet rapidity from 0 to 2.8.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 310 to 400 GeV and absolute values of the jet rapidity from 0 to 2.8.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 400 to 500 GeV and absolute values of the jet rapidity from 0 to 2.8.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 500 to 600 GeV and absolute values of the jet rapidity from 0 to 2.8.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 30 to 40 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 30 to 40 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 30 to 40 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 30 to 40 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 30 to 40 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 40 to 60 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 40 to 60 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 40 to 60 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 40 to 60 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 40 to 60 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 60 to 80 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 60 to 80 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 60 to 80 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 60 to 80 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 60 to 80 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 80 to 110 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 80 to 110 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 80 to 110 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 80 to 110 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 80 to 110 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 110 to 160 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 110 to 160 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 110 to 160 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 110 to 160 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 110 to 160 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 160 to 210 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 160 to 210 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 160 to 210 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 160 to 210 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 160 to 210 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 210 to 260 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 210 to 260 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 210 to 260 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 210 to 260 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 210 to 260 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 260 to 310 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 260 to 310 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 260 to 310 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 260 to 310 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 260 to 310 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 310 to 400 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 310 to 400 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 310 to 400 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 310 to 400 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 400 to 500 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 400 to 500 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 400 to 500 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Differential Jet Shape RHO as a function of r for jet transverse momentum from 400 to 500 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Integrated Jet Shape 1-PSI as a function of jet transverse momentum for an r value of 0.3 and absolute values of the jet rapidity from 0 to 2.8.
Measured Integrated Jet Shape 1-PSI as a function of jet transverse momentum for an r value of 0.3 and absolute values of the jet rapidity from 0 to 0.3.
Measured Integrated Jet Shape 1-PSI as a function of jet transverse momentum for an r value of 0.3 and absolute values of the jet rapidity from 0.3 to 0.8.
Measured Integrated Jet Shape 1-PSI as a function of jet transverse momentum for an r value of 0.3 and absolute values of the jet rapidity from 0.8 to 1.2.
Measured Integrated Jet Shape 1-PSI as a function of jet transverse momentum for an r value of 0.3 and absolute values of the jet rapidity from 1.2 to 2.1.
Measured Integrated Jet Shape 1-PSI as a function of jet transverse momentum for an r value of 0.3 and absolute values of the jet rapidity from 2.1 to 2.8.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 30 to 40 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 30 to 40 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 30 to 40 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 30 to 40 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 30 to 40 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 30 to 40 GeV and absolute values of the jet rapidity from 0 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 40 to 60 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 40 to 60 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 40 to 60 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 40 to 60 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 40 to 60 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 40 to 60 GeV and absolute values of the jet rapidity from 0 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 60 to 80 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 60 to 80 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 60 to 80 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 60 to 80 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 60 to 80 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 60 to 80 GeV and absolute values of the jet rapidity from 0 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 80 to 110 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 80 to 110 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 80 to 110 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 80 to 110 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 80 to 110 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 80 to 110 GeV and absolute values of the jet rapidity from 0 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 110 to 160 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 110 to 160 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 110 to 160 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 110 to 160 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 110 to 160 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 110 to 160 GeV and absolute values of the jet rapidity from 0 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 160 to 210 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 160 to 210 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 160 to 210 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 160 to 210 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 160 to 210 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 160 to 210 GeV and absolute values of the jet rapidity from 0 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 210 to 260 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 210 to 260 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 210 to 260 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 210 to 260 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 210 to 260 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 210 to 260 GeV and absolute values of the jet rapidity from 0 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 260 to 310 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 260 to 310 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 260 to 310 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 260 to 310 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 260 to 310 GeV and absolute values of the jet rapidity from 2.1 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 260 to 310 GeV and absolute values of the jet rapidity from 0 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 310 to 400 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 310 to 400 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 310 to 400 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 310 to 400 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 310 to 400 GeV and absolute values of the jet rapidity from 0 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 400 to 500 GeV and absolute values of the jet rapidity from 0 to 0.3. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 400 to 500 GeV and absolute values of the jet rapidity from 0.3 to 0.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 400 to 500 GeV and absolute values of the jet rapidity from 0.8 to 1.2. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 400 to 500 GeV and absolute values of the jet rapidity from 1.2 to 2.1. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 400 to 500 GeV and absolute values of the jet rapidity from 0 to 2.8. This is additional data, not in the paper.
Measured Integrated Jet Shape PSI as a function of r for jet transverse momentum from 500 to 600 GeV and absolute values of the jet rapidity from 0 to 2.8. This is additional data, not in the paper.
Measurements are presented from proton-proton collisions at centre-of-mass energies of sqrt(s) = 0.9, 2.36 and 7 TeV recorded with the ATLAS detector at the LHC. Events were collected using a single-arm minimum-bias trigger. The charged-particle multiplicity, its dependence on transverse momentum and pseudorapidity and the relationship between the mean transverse momentum and charged-particle multiplicity are measured. Measurements in different regions of phase-space are shown, providing diffraction-reduced measurements as well as more inclusive ones. The observed distributions are corrected to well-defined phase-space regions, using model-independent corrections. The results are compared to each other and to various Monte Carlo models, including a new AMBT1 PYTHIA 6 tune. In all the kinematic regions considered, the particle multiplicities are higher than predicted by the Monte Carlo models. The central charged-particle multiplicity per event and unit of pseudorapidity, for tracks with pT >100 MeV, is measured to be 3.483 +- 0.009 (stat) +- 0.106 (syst) at sqrt(s) = 0.9 TeV and 5.630 +- 0.003 (stat) +- 0.169 (syst) at sqrt(s) = 7 TeV.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of pseudorapidity for events with the number of charged particles >=1 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 2360 GeV as a function of pseudorapidity for events with the number of charged particles >=1 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of pseudorapidity for events with the number of charged particles >=1 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of pseudorapidity for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of pseudorapidity for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of pseudorapidity for events with the number of charged particles >=6 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of pseudorapidity for events with the number of charged particles >=6 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of transverse momentum for events with the number of charged particles >=1 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 2360 GeV as a function of transverse momentum for events with the number of charged particles >=1 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of transverse momentum for events with the number of charged particles >=1 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of transverse momentum for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of transverse momentum for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of transverse momentum for events with the number of charged particles >=6 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of transverse momentum for events with the number of charged particles >=6 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 900 GeV for events with the number of charged particles >=1 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 2360 GeV for events with the number of charged particles >=1 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 7000 GeV for events with the number of charged particles >=1 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 900 GeV for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 7000 GeV for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 900 GeV for events with the number of charged particles >=6 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 7000 GeV for events with the number of charged particles >=6 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Average transverse momentum in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of the number of charged particles in the event for events with the number of charged particles >=1 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Average transverse momentum in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of the number of charged particles in the event for events with the number of charged particles >=1 having transverse momentum >500 MeV and absolute(pseudorapidity) <2.5.
Average transverse momentum in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of the number of charged particles in the event for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Average transverse momentum in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of the number of charged particles in the event for events with the number of charged particles >=2 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of pseudorapidity for events with the number of charged particles >=20 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of pseudorapidity for events with the number of charged particles >=20 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of pseudorapidity for events with the number of charged particles >=1 having transverse momentum >2500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of pseudorapidity for events with the number of charged particles >=1 having transverse momentum >2500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of transverse momentum for events with the number of charged particles >=20 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of transverse momentum for events with the number of charged particles >=20 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of transverse momentum for events with the number of charged particles >=1 having transverse momentum >2500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicities in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of transverse momentum for events with the number of charged particles >=1 having transverse momentum >2500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 900 GeV for events with the number of charged particles >=20 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 7000 GeV for events with the number of charged particles >=20 having transverse momentum >100 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 900 GeV for events with the number of charged particles >=1 having transverse momentum >2500 MeV and absolute(pseudorapidity) <2.5.
Charged-particle multiplicity distributions in proton-proton collisions at a centre-of mass energy of 7000 GeV for events with the number of charged particles >=1 having transverse momentum >2500 MeV and absolute(pseudorapidity) <2.5.
Average transverse momentum in proton-proton collisions at a centre-of mass energy of 900 GeV as a function of the number of charged particles in the event for events with the number of charged particles >=1 having transverse momentum >2500 MeV and absolute(pseudorapidity) <2.5.
Average transverse momentum in proton-proton collisions at a centre-of mass energy of 7000 GeV as a function of the number of charged particles in the event for events with the number of charged particles >=1 having transverse momentum >2500 MeV and absolute(pseudorapidity) <2.5.
The average charged-particle muliplicity per unit of rapidity for ETARAP=0 as a function of the centre-of-mass energy.
The average charged-particle muliplicity per unit of rapidity in the pseudorapidity region -2.5 to 2.5 for events with 2 or more charged particles as a function of the centre-of-mass energy.
The first measurements from proton-proton collisions recorded with the ATLAS detector at the LHC are presented. Data were collected in December 2009 using a minimum-bias trigger during collisions at a centre-of-mass energy of 900 GeV. The charged-particle multiplicity, its dependence on transverse momentum and pseudorapidity, and the relationship between mean transverse momentum and charged-particle multiplicity are measured for events with at least one charged particle in the kinematic range |eta|<2.5 and pT>500 MeV. The measurements are compared to Monte Carlo models of proton-proton collisions and to results from other experiments at the same centre-of-mass energy. The charged-particle multiplicity per event and unit of pseudorapidity at eta = 0 is measured to be 1.333 +/- 0.003 (stat.) +/- 0.040 (syst.), which is 5-15% higher than the Monte Carlo models predict.
Average value of charged particle multiplicity per event and unit of pseudorapidity in the pseudorapidity range from -0.2 to 0.2.
Charged particle multiplicity as a function of pseudorapidity.
Charged particle multiplicity as a function of transverse momentum.
Charged particle multiplicity distribution.
Average charged particle transverse momentum as a function of the number of charged particles in the event.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But, sometimes you may wish to be more specific. Here we show you how.
Guidance and examples on the query string syntax can be found in the Elasticsearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status
Email
Forum
Twitter
GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.