A polarized proton beam extracted from SATURNE II and the Saclay polarized proton target were used to measure the rescattering observables$K_{onno}$and
No description provided.
No description provided.
No description provided.
A polarized proton beam extracted from SATURNE II and the Saclay polarized proton target were used to determine the spin correlation parameter Aoosk and the rescattering observablesKos″ so; Dos″ok, Nos″sn, andNonsk at 1.80 and 2.10 GeV. The beam polarization was oriented perpendicular to the beam direction in the horizontal scattering plane and the target polarization was directed either along the vertical axis or longitudinally. Left-right and up-down asymmetries in the second scattering were measured. A check for the beam optimization with the beam and target polarizations oriented vertically provided other observables, of which results forDonon andKonno at 1.80, 1.85, 2.04, and 2.10 GeV are listed here. The new data at 2.10 GeV suggest a smooth energy dependence of spin triplet scattering amplitudes at fixed angles in the vicinity of this energy.
Spin correlation parameter CSL measured with the beam polarisation measuredalong the +-S direction and the target polarisation along the +-L axis. Additional 4.3 PCT systematic normalisation uncertainty.
Measurement of the rescattering parameter KSS with the beam polarisation inthe +- S direction. Additional 6.7 PCT systematic error.
Measurement of the rescattering parameter KSS with the beam polarisation inthe +- S direction. Additional 6.7 PCT systematic error.
The total cross section of the reaction $pp\to ppK^+K^-$ has been determined for proton--proton reactions with $p_{beam}=3.67 GeV/c$. This represents the first cross section measurement of the $pp \to ppK^-K^+$ channel near threshold, and is equivalent to the inclusive $pp\to ppK^-X$ cross section at this beam momentum. The cross section determined at this beam momentum is about a factor 20 lower than that for inclusive $pp\to ppK^+X$ meson production at the same CM energy above the corresponding threshold. This large difference in the $K^+$ and $K^-$ meson inclusive production cross sections in proton-proton reactions is in strong contrast to cross sections measured in sub-threshold heavy ion collisions, which are similar in magnitude at the same energy per nucleon below the respective thresholds.
Total exclusive production cross section for the resonant and non-resonant channels.
Total PHI meson production cross section after correction for the corresponding partial width (C.Caso et al. EPJ C1(98)1).
Differential cross sections for the exclusive reaction p⃗p→ppη observed via the η→π+π−π0 decay channel have been measured at Tbeam=2.15GeV, 2.50GeV, and 2.85GeV (excess energies 324MeV, 412MeV, and 554MeV). The influence of the N(1535)S11 resonance is clearly seen in the invariant mass and momentum dependent differential cross sections. The extracted resonance parameters are compatible with existing data. No significant evidence for further resonance contributions has been found. In addition, angular distributions of the ppη final state have been measured. The polar angle distribution of the η shows an anisotropy with respect to the beam axis for the lowest beam energy, which vanishes for the higher energies. The sign of this anisotropy is negative and expected to be sensitive to the dominant production mechanism. In contrast, the proton polar angle in the pp rest frame tends to be more strongly aligned along the beam axis with increasing beam energy. The analyzing power Ay is compatible with zero for all beam energies.
Differential cross section for incident kinetic energy 2.15 GeV, divided by the phase space as a function of the invariant mass of the ETA and the final state proton with the lower value of ABS(T). This is proportional to the square of the decay matrix element ABS(M)**2 of the P-ETA system.
Differential cross section for incident kinetic energy 2.50 GeV, divided by the phase space as a function of the invariant mass of the ETA and the final state proton with the lower value of ABS(T). This is proportional to the square of the decay matrix element ABS(M)**2 of the P-ETA system.
Differential cross section for incident kinetic energy 2.85 GeV, divided by the phase space as a function of the invariant mass of the ETA and the final state proton with the lower value of ABS(T). This is proportional to the square of the decay matrix element ABS(M)**2 of the P-ETA system.
The ratio of the total exclusive production cross sections for $\eta\prime$ and $\eta$ mesons has been measured in the $pp$ reaction at $p_{beam}=3.67$ GeV/c. The observed $\eta\prime/\eta$ ratio is $(0.83\pm{0.11}^{+0.23}_{-0.18})\times 10^{-2}$ from which the exclusive $\eta\prime$ meson production cross section is determined to be $(1.12\pm{0.15}^{+0.42}_{-0.31})\mu b$. Differential cross section distributions have been measured. Their shape is consistent with isotropic $\eta\prime$ meson production.
No description provided.
No description provided.
Only statistial errors.
The exclusive production cross sections for $\omega$ and $\phi$ mesons have been measured in proton-proton reactions at $p_{lab}=3.67$ GeV/c. The observed $\phi/\omega$ cross section ratio is $(3.8\pm0.2^{+1.2}_{-0.9})\times 10^{-3}$. After phase space corrections, this ratio is enhanced by about an order of magnitude relative to naive predictions based upon the Okubo-Zweig-Iizuka (OZI) rule, in comparison to an enhancement by a factor $\sim 3$ previously observed at higher beam momenta. The modest increase of this enhancement near the production threshold is compared to the much larger increase of the $\phi/\omega$ ratio observed in specific channels of $\bar pp$ annihilation experiments. Furthermore, differential cross section results are also presented which indicate that although the $\phi$ meson is predominantly produced from a $^3P_1$ proton-proton entrance channel, other partial waves contribute significantly to the production mechanism at this beam momentum.
No description provided.
Differential cross section of OMEGA production.
Differential cross section of PHI production.
A polarized proton beam extracted from SATURNE II was scattered on an unpolarized CH 2 target. The angular distribution of the beam analyzing power A oono was measured at large angles from 1.98 to 2.8 GeV and at 0.80 GeV nominal beam kinetic energy. The same observable was determined at the fixed mean laboratory angle of 13.9° in the same energy range. Both measurements are by-products of an experiment measuring the spin correlation parameter A oon .
Analysing power measurements at a fixed laboratory angle of 13.9 degrees.
No description provided.
No description provided.
Total and differential cross sections for the exclusive reaction pp->pp rho^0 observed via the pi+pi- decay channel have been measured at beam momentum=3.67 GeV/c. The observed total meson production cross section is determined to be 23.4 +- 0.8 +-8 microb and is significantly lower than typical cross sections used in model calculations for heavy ion collisions. The differential cross sections measured indicate a strong anisotropy cos^2(theta^{CM}) in the rho^0 meson production.
Total cross section determined by normalising to the simultaneously measured ETA yield to the known cross section of 135 +- 35 MUB.
The ratio of the exclusive production cross sections for φ and ω mesons has been measured in pp reactions at Tbeam=2.85GeV. The observed φ/ω ratio is (3.7±0.7−0.9+1.2)×10−3. After phase space corrections, this ratio is about a factor of 10 enhanced relative to naive predictions based upon the Okubo-Zweig-Iizuka rule, in comparison to an enhancement by a factor of ∼3 previously observed at higher energies. The modest increase of this enhancement near the production threshold is compared to the much larger increase of the φ/ω ratio observed in specific channels of p¯p annihilation experiments.
No description provided.
The pp elastic scattering analyzing power was measured in small energy steps in the vicinity of the accelerator depolarizing resonance $\gamma G= 6 $ at 2.202 GeV.
Analysing power measurements in P P elastic scattering LEN(C=CU) is the length of CU degrader thickness used in each group.
Analysing power measurements in P P elastic scattering LEN(C=CU) is the length of CU degrader thickness used in each group.
Analysing power measurements in P P elastic scattering LEN(C=CU) is the length of CU degrader thickness used in each group.
Forum