Showing 2 of 2 results
A search for new phenomena has been performed in final states with at least one isolated high-momentum photon, jets and missing transverse momentum in proton--proton collisions at a centre-of-mass energy of $\sqrt{s} = 13$ TeV. The data, collected by the ATLAS experiment at the CERN LHC, correspond to an integrated luminosity of 139 $fb^{-1}$. The experimental results are interpreted in a supersymmetric model in which pair-produced gluinos decay into neutralinos, which in turn decay into a gravitino, at least one photon, and jets. No significant deviations from the predictions of the Standard Model are observed. Upper limits are set on the visible cross section due to physics beyond the Standard Model, and lower limits are set on the masses of the gluinos and neutralinos, all at 95% confidence level. Visible cross sections greater than 0.022 fb are excluded and pair-produced gluinos with masses up to 2200 GeV are excluded for most of the NLSP masses investigated.
The observed and expected (post-fit) yields in the control and validation regions. The lower panel shows the difference in standard deviations between the observed and expected yields, considering both the systematic and statistical uncertainties on the background expectation.
Observed (points with error bars) and expected background (solid histograms) distributions for $E_{T}^{miss}$ in the signal region (a) SRL, (b) SRM and (c) SRH after the background-only fit applied to the CRs. The predicted signal distributions for the two models with a gluino mass of 2000 GeV and neutralino mass of 250 GeV (SRL), 1050 GeV (SRM) or 1950 GeV (SRH) are also shown for comparison. The uncertainties in the SM background are only statistical.
Observed (points with error bars) and expected background (solid histograms) distributions for $E_{T}^{miss}$ in the signal region (a) SRL, (b) SRM and (c) SRH after the background-only fit applied to the CRs. The predicted signal distributions for the two models with a gluino mass of 2000 GeV and neutralino mass of 250 GeV (SRL), 1050 GeV (SRM) or 1950 GeV (SRH) are also shown for comparison. The uncertainties in the SM background are only statistical.
Observed (points with error bars) and expected background (solid histograms) distributions for $E_{T}^{miss}$ in the signal region (a) SRL, (b) SRM and (c) SRH after the background-only fit applied to the CRs. The predicted signal distributions for the two models with a gluino mass of 2000 GeV and neutralino mass of 250 GeV (SRL), 1050 GeV (SRM) or 1950 GeV (SRH) are also shown for comparison. The uncertainties in the SM background are only statistical.
Observed and expected exclusion limit in the gluino-neutralino mass plane at 95% CL combined using the signal region with the best expected sensitivity at each point, for the full Run-2 dataset corresponding to an integrated luminosity of $139~\mathrm{fb}^{-1}$, for $\gamma/Z$ (a) and $\gamma/h$ (b) signal models. The black solid line corresponds to the expected limits at 95% CL, with the light (yellow) bands indicating the 1$\sigma$ exclusions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves, the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties. For each point in the higgsino-bino parameter space, the labels indicate the best-expected signal region, where L, M and H mean SRL, SRM and SRH, respectively.
Observed and expected exclusion limit in the gluino-neutralino mass plane at 95% CL combined using the signal region with the best expected sensitivity at each point, for the full Run-2 dataset corresponding to an integrated luminosity of $139~\mathrm{fb}^{-1}$, for $\gamma/Z$ (a) and $\gamma/h$ (b) signal models. The black solid line corresponds to the expected limits at 95% CL, with the light (yellow) bands indicating the 1$\sigma$ exclusions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves, the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties. For each point in the higgsino-bino parameter space, the labels indicate the best-expected signal region, where L, M and H mean SRL, SRM and SRH, respectively.
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Cutflow for the SRL selection, for two relevant signal points for both $\gamma/Z$ and $\gamma/h$ models, where the gluinos have mass of 2000 GeV and the neutralinos have a mass of 250 GeV (10000 generated events). The numbers are normalized to a luminosity of 139 $fb^{-1}$.
Cutflow for the SRM selection, for two relevant signal points for both $\gamma/Z$ and $\gamma/h$ models, where the gluinos have mass of 2000 GeV and the neutralinos have a mass of 1050 GeV (10000 generated events). The numbers are normalized to a luminosity of 139 $fb^{-1}$.
Cutflow for the SRH selection, for two relevant signal points for both $\gamma/Z$ and $\gamma/h$ models, where the gluinos have mass of 2000 GeV and the neutralinos have a mass of 1950 GeV (10000 generated events). The numbers are normalized to a luminosity of 139 $fb^{-1}$.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
A search for the supersymmetric partners of quarks and gluons (squarks and gluinos) in final states containing jets and missing transverse momentum, but no electrons or muons, is presented. The data used in this search were recorded by the ATLAS experiment in proton-proton collisions at a centre-of-mass energy of $\sqrt{s}$ = 13 TeV during Run 2 of the Large Hadron Collider, corresponding to an integrated luminosity of 139 fb$^{-1}$. The results are interpreted in the context of various $R$-parity-conserving models where squarks and gluinos are produced in pairs or in association and a neutralino is the lightest supersymmetric particle. An exclusion limit at the 95% confidence level on the mass of the gluino is set at 2.30 TeV for a simplified model containing only a gluino and the lightest neutralino, assuming the latter is massless. For a simplified model involving the strong production of mass-degenerate first- and second-generation squarks, squark masses below 1.85 TeV are excluded if the lightest neutralino is massless. These limits extend substantially beyond the region of supersymmetric parameter space excluded previously by similar searches with the ATLAS detector.
Observed $m_{\mathrm{eff}}$ distributions in signal regions MB-SSd. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed $m_{\mathrm{eff}}$ distributions in signal regions MB-SSd. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed metSig distributions in signal regions MB-SSd. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed metSig distributions in signal regions MB-SSd. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed $m_{\mathrm{eff}}$ distributions in signal regions MB-GGd. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed $m_{\mathrm{eff}}$ distributions in signal regions MB-GGd. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed metSig distributions in signal regions MB-GGd. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed metSig distributions in signal regions MB-GGd. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed $m_{\mathrm{eff}}$ distributions in signal regions MB-C. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed $m_{\mathrm{eff}}$ distributions in signal regions MB-C. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed metSig distributions in signal regions MB-C. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed metSig distributions in signal regions MB-C. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed BDT-GGd1 score distributions in signal regions GGd1. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed BDT-GGd1 score distributions in signal regions GGd1. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed BDT-GGo1 score distributions in signal regions GGo1. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Observed BDT-GGo1 score distributions in signal regions GGo1. The histograms show the MC background predictions normalised by the background-only fit. The hatched (red) error bands indicate experimental and MC statistical uncertainties. Expected distributions for benchmark signal model points, normalised using the approximate NNLO+NNLL cross-section times integrated luminosity, are also shown for comparison (masses in GeV).
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd1
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd1
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd2
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd2
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd3
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd3
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd4
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd4
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo1
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo1
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo2
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo2
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo3
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo3
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo4
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo4
Signal region acceptance for simplified model with squark pair production and decays to a quark and neutralino in SR 2j-1600
Signal region acceptance for simplified model with squark pair production and decays to a quark and neutralino in SR 2j-1600
Signal region acceptance for simplified model with squark pair production and decays to a quark and neutralino in SR 2j-2200
Signal region acceptance for simplified model with squark pair production and decays to a quark and neutralino in SR 2j-2200
Signal region acceptance for simplified model with squark pair production and decays to a quark and neutralino in SR 2j-2800
Signal region acceptance for simplified model with squark pair production and decays to a quark and neutralino in SR 2j-2800
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR 4j-1000
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR 4j-1000
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR 4j-2200
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR 4j-2200
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR 4j-3400
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR 4j-3400
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR 5j-1600
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and neutralino in SR 5j-1600
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR 6j-1000
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR 6j-1000
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR 6j-2200
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR 6j-2200
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR 6j-3400
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR 6j-3400
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd1. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd1. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd2. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd2. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd3. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd3. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd4. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR BDT-GGd4. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo1. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo1. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo2. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo2. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo3. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo3. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo4. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR BDT-GGo4. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with squark pair production and decays to a quark and neutralino in SR 2j-1600. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with squark pair production and decays to a quark and neutralino in SR 2j-1600. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with squark pair production and decays to a quark and neutralino in SR 2j-2200. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with squark pair production and decays to a quark and neutralino in SR 2j-2200. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with squark pair production and decays to a quark and neutralino in SR 2j-2800. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with squark pair production and decays to a quark and neutralino in SR 2j-2800. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR 4j-1000. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR 4j-1000. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR 4j-2200. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR 4j-2200. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR 4j-3400. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR 4j-3400. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR 5j-1600. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and neutralino in SR 5j-1600. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR 6j-1000. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR 6j-1000. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR 6j-2200. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR 6j-2200. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR 6j-3400. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR 6j-3400. Efficiencies on signal points with low statistics are not reported. The efficiency value -1.0 in the table corresponds to the case where efficiency cannot be calculated due to the null acceptance of the model point.
Exclusion limits in the mass plane of the lightest neutralino and first- and second-generation squarks assuming squark pair production and direct decays obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with a dark dashed curve, with the light (yellow) band indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and first- and second-generation squarks assuming squark pair production and direct decays obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with a dark dashed curve, with the light (yellow) band indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and first- and second-generation squarks assuming squark pair production and direct decays obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curve where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and first- and second-generation squarks assuming squark pair production and direct decays obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curve where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and non degenerated squark pair production and direct decays obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with a dark dashed curve, with the light (yellow) band indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and non degenerated squark pair production and direct decays obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with a dark dashed curve, with the light (yellow) band indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and non degenerated squark pair production and direct decays obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curve where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and non degenerated squark pair production and direct decays obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curve where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and the gluino for gluino pair production with direct decays obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with a dark dashed curve, with the light (yellow) band indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and the gluino for gluino pair production with direct decays obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with a dark dashed curve, with the light (yellow) band indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and the gluino for gluino pair production with direct decays obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curve where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and the gluino for gluino pair production with direct decays obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curve where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and squarks. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and squarks. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and squarks. The observed limits are indicated by the medium dark (maroon) curves where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and squarks. The observed limits are indicated by the medium dark (maroon) curves where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits for squark pair production with a one-step decay via an intermediate chargino. The neutralino mass is fixed at 60 GeV and exclusion limits are given for mass difference ratio, $X$, as a function of the squark mass. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits for squark pair production with a one-step decay via an intermediate chargino. The neutralino mass is fixed at 60 GeV and exclusion limits are given for mass difference ratio, $X$, as a function of the squark mass. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits for squark pair production with a one-step decay via an intermediate chargino. The neutralino mass is fixed at 60 GeV and exclusion limits are given for mass difference ratio, $X$, as a function of the squark mass. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curves where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits for squark pair production with a one-step decay via an intermediate chargino. The neutralino mass is fixed at 60 GeV and exclusion limits are given for mass difference ratio, $X$, as a function of the squark mass. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curves where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and gluinos. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and gluinos. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and gluinos. The observed limits are indicated by the medium dark (maroon) curve where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits in the mass plane of the lightest neutralino and gluinos. The observed limits are indicated by the medium dark (maroon) curve where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits for gluino pair production with a one-step decay via an intermediate chargino. The neutralino mass is fixed at 60 GeV and exclusion limits are given for mass difference ratio, $X$, as a function of the gluino mass. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits for gluino pair production with a one-step decay via an intermediate chargino. The neutralino mass is fixed at 60 GeV and exclusion limits are given for mass difference ratio, $X$, as a function of the gluino mass. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits for gluino pair production with a one-step decay via an intermediate chargino. The neutralino mass is fixed at 60 GeV and exclusion limits are given for mass difference ratio, $X$, as a function of the gluino mass. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curves where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits for gluino pair production with a one-step decay via an intermediate chargino. The neutralino mass is fixed at 60 GeV and exclusion limits are given for mass difference ratio, $X$, as a function of the gluino mass. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curves where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits for the model with combined production of squark pairs, gluino pairs, and of squark--gluino pairs. The neutralino mass is fixed at 0 GeV. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits for the model with combined production of squark pairs, gluino pairs, and of squark--gluino pairs. The neutralino mass is fixed at 0 GeV. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits for the model with combined production of squark pairs, gluino pairs, and of squark--gluino pairs. The neutralino mass is fixed at 0 GeV. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curves where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits for the model with combined production of squark pairs, gluino pairs, and of squark--gluino pairs. The neutralino mass is fixed at 0 GeV. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curves where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits for the model with combined production of squark pairs, gluino pairs, and of squark--gluino pairs. The neutralino mass is fixed at 995 GeV. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits for the model with combined production of squark pairs, gluino pairs, and of squark--gluino pairs. The neutralino mass is fixed at 995 GeV. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits for the model with combined production of squark pairs, gluino pairs, and of squark--gluino pairs. The neutralino mass is fixed at 995 GeV. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curves where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits for the model with combined production of squark pairs, gluino pairs, and of squark--gluino pairs. The neutralino mass is fixed at 995 GeV. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curves where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits for the model with combined production of squark pairs, gluino pairs, and of squark--gluino pairs. The neutralino mass is fixed at 1495 GeV. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits for the model with combined production of squark pairs, gluino pairs, and of squark--gluino pairs. The neutralino mass is fixed at 1495 GeV. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The expected limits are indicated with dark dashed curves, with the light (yellow) bands indicating the $1\sigma$ excursions due to experimental and background-only theoretical uncertainties.
Exclusion limits for the model with combined production of squark pairs, gluino pairs, and of squark--gluino pairs. The neutralino mass is fixed at 1495 GeV. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curves where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
Exclusion limits for the model with combined production of squark pairs, gluino pairs, and of squark--gluino pairs. The neutralino mass is fixed at 1495 GeV. Exclusion limits are obtained by using the signal region with the best expected sensitivity at each point. The observed limits are indicated by the medium dark (maroon) curves where the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross-section by the renormalisation and factorisation scale and PDF uncertainties.
The observed upper limits on signal cross section corresponding to the best expected signal region in each mass point for squark-pair production with direct decays.
The observed upper limits on signal cross section corresponding to the best expected signal region in each mass point for squark-pair production with direct decays.
The observed upper limits on signal cross section corresponding to the best expected signal region in each mass point for gluino-pair production with direct decays
The observed upper limits on signal cross section corresponding to the best expected signal region in each mass point for gluino-pair production with direct decays
The observed upper limits on signal cross section corresponding to the best expected signal region in each mass point for squark-pair production with a one-step decay via an intermediate chargino.
The observed upper limits on signal cross section corresponding to the best expected signal region in each mass point for squark-pair production with a one-step decay via an intermediate chargino.
The observed upper limits on signal cross section corresponding to the best expected signal region in each mass point for squark-pair production with a one-step decay via an intermediate chargino. The neutralino mass is fixed at 60 GeV and exclusion limits are given for mass difference ratio, $X$, as a function of the squark mass.
The observed upper limits on signal cross section corresponding to the best expected signal region in each mass point for squark-pair production with a one-step decay via an intermediate chargino. The neutralino mass is fixed at 60 GeV and exclusion limits are given for mass difference ratio, $X$, as a function of the squark mass.
The observed upper limits on signal cross section corresponding to the best expected signal region in each mass point for gluino-pair production with a one-step decay via an intermediate chargino.
The observed upper limits on signal cross section corresponding to the best expected signal region in each mass point for gluino-pair production with a one-step decay via an intermediate chargino.
The observed upper limits on signal cross section corresponding to the best expected signal region in each mass point for gluino-pair production with a one-step decay via an intermediate chargino. The neutralino mass is fixed at 60~GeV and exclusio limits are given for mass difference ratio, $X$, as a function of the gluino mass.
The observed upper limits on signal cross section corresponding to the best expected signal region in each mass point for gluino-pair production with a one-step decay via an intermediate chargino. The neutralino mass is fixed at 60~GeV and exclusio limits are given for mass difference ratio, $X$, as a function of the gluino mass.
Cut-flow for model-independent search regions targeting squarks for SS direct model points. Expected yields are normalized to a luminosity of 139 fb$^{-1}$.
Cut-flow for model-independent search regions targeting squarks for SS direct model points. Expected yields are normalized to a luminosity of 139 fb$^{-1}$.
Cut-flow for model-independent search regions targeting gluinos for GG direct model points. Expected yields are normalized to a luminosity of 139 fb$^{-1}$.
Cut-flow for model-independent search regions targeting gluinos for GG direct model points. Expected yields are normalized to a luminosity of 139 fb$^{-1}$.
Cut-flow for model-independent search regions targeting squarks and gluinos in models with one-step decay. Expected yields are normalized to a luminosity of 139 $fb^{-1}$.
Cut-flow for model-independent search regions targeting squarks and gluinos in models with one-step decay. Expected yields are normalized to a luminosity of 139 $fb^{-1}$.
Cut-flow for BDT search regions targeting gluinos in models with one-step decays. Expected yields are normalized to a luminosity of 139 $fb^{-1}$.
Cut-flow for BDT search regions targeting gluinos in models with one-step decays. Expected yields are normalized to a luminosity of 139 $fb^{-1}$.
Cut-flow for BDT search regions targeting gluinos in models with direct decays. Expected yields are normalized to a luminosity of 139 $fb^{-1}$.
Cut-flow for BDT search regions targeting gluinos in models with direct decays. Expected yields are normalized to a luminosity of 139 $fb^{-1}$.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But sometimes you may wish to be more specific. Here we show you how.
Guidance on the query string syntax can also be found in the OpenSearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.