Distribution of $E_{\text{T}}^{\text{miss}}$ in SROS-on-b-$e\mu\mu$. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by a black arrow. The last bin includes the overflow. The `Others' category contains the production of Higgs boson, 3-top, 4-top, and single-top processes. Distributions for SBH signals are overlaid. The bottom panels show the ratio of the observed data to the predicted total background yields. The hatched band includes all statistical and systematic uncertainties.

Distribution of $m_{\text{T}}^{\text{min}}$ in SROS-on-b-$e\mu\mu$. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by a black arrow. The last bin includes the overflow. The `Others' category contains the production of Higgs boson, 3-top, 4-top, and single-top processes. Distributions for SBH signals are overlaid. The bottom panels show the ratio of the observed data to the predicted total background yields. The hatched band includes all statistical and systematic uncertainties.

Distribution of $E_{\text{T}}^{\text{miss}}$ in SRSS-$2\mu$. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by a black arrow. The last bin includes the overflow. The `Others' category contains the production of Higgs boson, 3-top, 4-top, and single-top processes. Distributions for SBH signals are overlaid. The bottom panels show the ratio of the observed data to the predicted total background yields. The hatched band includes all statistical and systematic uncertainties.

Observed ($N_{\text{obs}}$) and expected ($N_{\text{exp}}$) yields after the background-only fit for the flavor-merged inclusive SRs. The third and fourth columns list the 95\% CL upper limits on the visible cross-section ($\sigma_{\text{vis}}^{95}$) and on the number of signal events ($S_\text{obs}^{95}$). The fifth column ($S_\text{exp}^{95}$) shows the 95\% CL upper limit on the number of signal events, given the expected number of background events and its $\pm 1\sigma$ variations. The last two columns indicate the CL$_{\text{b}}$ value, i.e. the confidence level observed for the background-only hypothesis, and the discovery $p$-value ($p(s = 0)$) with its associated statistical significance $Z$. If the observed yield is below the expected yield, the $p$-value is capped at 0.5.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ are considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ are considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ are considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ are considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ are considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ are considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where only $\tilde{e}_{\text{L}}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where only $\tilde{e}_{\text{L}}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where only $\tilde{e}_{\text{L}}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where only $\tilde{e}_{\text{L}}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where only $\tilde{e}_{\text{L}}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where only $\tilde{e}_{\text{L}}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where only $\tilde{\mu}_{\text{L}}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where only $\tilde{\mu}_{\text{L}}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where only $\tilde{\mu}_{\text{L}}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where only $\tilde{\mu}_{\text{L}}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where only $\tilde{\mu}_{\text{L}}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Observed and expected exclusion limits on the SBH model where only $\tilde{\mu}_{\text{L}}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100~GeV.

Distribution of $E_{\text{T}}^{\text{miss}}$ in SROS-off-b-$e\mu\mu$. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by a black arrow. The last bin includes the overflow. The `Others' category contains the production of Higgs boson, 3-top, 4-top, and single-top processes. Distributions for SBH signals are overlaid. The bottom panels show the ratio of the observed data to the predicted total background yields. Ratio values outside the graph range are indicated by brown arrows. The hatched band includes all statistical and systematic uncertainties.

Distribution of $m_{\text{T}}^{\text{min}}$ in SROS-off-b-$e\mu\mu$. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by a black arrow. The last bin includes the overflow. The `Others' category contains the production of Higgs boson, 3-top, 4-top, and single-top processes. Distributions for SBH signals are overlaid. The bottom panels show the ratio of the observed data to the predicted total background yields. Ratio values outside the graph range are indicated by brown arrows. The hatched band includes all statistical and systematic uncertainties.

Distribution of $E_{\text{T}}^{\text{miss}}$ in SRSS-$eee$. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by a black arrow. The last bin includes the overflow. The `Others' category contains the production of Higgs boson, 3-top, 4-top, and single-top processes. Distributions for SBH signals are overlaid. The bottom panels show the ratio of the observed data to the predicted total background yields. Ratio values outside the graph range are indicated by brown arrows. The hatched band includes all statistical and systematic uncertainties.

Distribution of $E_{\text{T}}^{\text{miss}}$ in SRSS-$ee\mu$. The SR selections are applied for each distribution, except for the variable shown, for which the selection is indicated by a black arrow. The last bin includes the overflow. The `Others' category contains the production of Higgs boson, 3-top, 4-top, and single-top processes. Distributions for SBH signals are overlaid. The bottom panels show the ratio of the observed data to the predicted total background yields. Ratio values outside the graph range are indicated by brown arrows. The hatched band includes all statistical and systematic uncertainties.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 150 GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 150 GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 150 GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 150 GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 150 GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ is considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $m(\tilde{\ell}_{\text{L}}^{\pm})$ vs $m(\tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 150 GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ are considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $\Delta m(\tilde{\chi}^0_3, \tilde{\chi}^0_1)$ vs $\Delta m(\tilde{\ell}_{\text{L}}, \tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100 GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ are considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $\Delta m(\tilde{\chi}^0_3, \tilde{\chi}^0_1)$ vs $\Delta m(\tilde{\ell}_{\text{L}}, \tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100 GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ are considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $\Delta m(\tilde{\chi}^0_3, \tilde{\chi}^0_1)$ vs $\Delta m(\tilde{\ell}_{\text{L}}, \tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100 GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ are considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $\Delta m(\tilde{\chi}^0_3, \tilde{\chi}^0_1)$ vs $\Delta m(\tilde{\ell}_{\text{L}}, \tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100 GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ are considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $\Delta m(\tilde{\chi}^0_3, \tilde{\chi}^0_1)$ vs $\Delta m(\tilde{\ell}_{\text{L}}, \tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100 GeV.

Observed and expected exclusion limits on the SBH model where mass-degenerate $\tilde{e}_{\text{L}}$, $\tilde{\mu}_{\text{L}}$ and $\tilde{\nu}$ are considered. The expected 95% CL exclusion limit is shown as a dashed black line, with the yellow band indicating $\pm1\sigma_{\text{exp}}$ including all uncertainties except for the signal cross-section uncertainty. The observed 95% CL exclusion limit is shown as a red solid line, with the dotted red lines indicating $\pm1\sigma_{\text{theory}}$ due to the signal cross-section uncertainty. The limits are shown projected onto the $\Delta m(\tilde{\chi}^0_3, \tilde{\chi}^0_1)$ vs $\Delta m(\tilde{\ell}_{\text{L}}, \tilde{\chi}^0_3)$ plane, with $m(\tilde{\chi}^0_1)$ assumed to be 100 GeV.

The expected upper limits on the cross-section for each signal point. The gray numbers represent the values. The expected (dashed) and observed (solid) 95% CL exclusion limits are overlaid. An asymptotic approximation is employed in the CL$_{\text{s}}$ calculation instead of the full calculation using pseudo-experiments.

The observed upper limits on the cross-section for each signal point. The gray numbers represent the values. The expected (dashed) and observed (solid) 95% CL exclusion limits are overlaid. An asymptotic approximation is employed in the CL$_{\text{s}}$ calculation instead of the full calculation using pseudo-experiments.

Acceptance for signals with $m(\tilde{\chi}^0_1)=100$ GeV in flavored-merged SRs. The acceptance is given by the ratio of weighted selected events in the SR to the weighted total number of generated events. The selection is based on generator-level particle information.

Acceptance for signals with $m(\tilde{\chi}^0_1)=100$ GeV in flavored-merged SRs. The acceptance is given by the ratio of weighted selected events in the SR to the weighted total number of generated events. The selection is based on generator-level particle information.

Acceptance for signals with $m(\tilde{\chi}^0_1)=100$ GeV in flavored-merged SRs. The acceptance is given by the ratio of weighted selected events in the SR to the weighted total number of generated events. The selection is based on generator-level particle information.

Acceptance for signals with $m(\tilde{\chi}^0_1)=100$ GeV in flavored-merged SRs. The acceptance is given by the ratio of weighted selected events in the SR to the weighted total number of generated events. The selection is based on generator-level particle information.

Acceptance for signals with $m(\tilde{\chi}^0_1)=100$ GeV in flavored-merged SRs. The acceptance is given by the ratio of weighted selected events in the SR to the weighted total number of generated events. The selection is based on generator-level particle information.

Acceptance for signals with $m(\tilde{\chi}^0_1)=100$ GeV in flavored-merged SRs. The acceptance is given by the ratio of weighted selected events in the SR to the weighted total number of generated events. The selection is based on generator-level particle information.

Acceptance for signals with $m(\tilde{\chi}^0_1)=100$ GeV in flavored-merged SRs. The acceptance is given by the ratio of weighted selected events in the SR to the weighted total number of generated events. The selection is based on generator-level particle information.

Efficiencies for signals with $m(\tilde{\chi}^0_1)=100$ GeV in the $m_{3\ell}$ merged SRSFOS and SRSS. The efficiency is defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level. Efficiencies below 0.002% are rounded to 0. The efficiency values are affected by statistical fluctuations due to the limited number of events.

Efficiencies for signals with $m(\tilde{\chi}^0_1)=100$ GeV in the $m_{3\ell}$ merged SRSFOS and SRSS. The efficiency is defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level. Efficiencies below 0.002% are rounded to 0. The efficiency values are affected by statistical fluctuations due to the limited number of events.

Efficiencies for signals with $m(\tilde{\chi}^0_1)=100$ GeV in the $m_{3\ell}$ merged SRSFOS and SRSS. The efficiency is defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level. Efficiencies below 0.002% are rounded to 0. The efficiency values are affected by statistical fluctuations due to the limited number of events.

Efficiencies for signals with $m(\tilde{\chi}^0_1)=100$ GeV in the $m_{3\ell}$ merged SRSFOS and SRSS. The efficiency is defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level. Efficiencies below 0.002% are rounded to 0. The efficiency values are affected by statistical fluctuations due to the limited number of events.

Efficiencies for signals with $m(\tilde{\chi}^0_1)=100$ GeV in the $m_{3\ell}$ merged SRSFOS and SRSS. The efficiency is defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level. Efficiencies below 0.002% are rounded to 0. The efficiency values are affected by statistical fluctuations due to the limited number of events.

Efficiencies for signals with $m(\tilde{\chi}^0_1)=100$ GeV in the $m_{3\ell}$ merged SRSFOS and SRSS. The efficiency is defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level. Efficiencies below 0.002% are rounded to 0. The efficiency values are affected by statistical fluctuations due to the limited number of events.

Efficiencies for signals with $m(\tilde{\chi}^0_1)=100$ GeV in the $m_{3\ell}$ merged SRSFOS and SRSS. The efficiency is defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level. Efficiencies below 0.002% are rounded to 0. The efficiency values are affected by statistical fluctuations due to the limited number of events.

Efficiencies for signals with $m(\tilde{\chi}^0_1)=100$ GeV in the $m_{3\ell}$ merged SRSFOS and SRSS. The efficiency is defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level. Efficiencies below 0.002% are rounded to 0. The efficiency values are affected by statistical fluctuations due to the limited number of events.

Efficiencies for signals with $m(\tilde{\chi}^0_1)=100$ GeV in the $m_{3\ell}$ merged SRSFOS and SRSS. The efficiency is defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level. Efficiencies below 0.002% are rounded to 0. The efficiency values are affected by statistical fluctuations due to the limited number of events.

Efficiencies for signals with $m(\tilde{\chi}^0_1)=100$ GeV in the $m_{3\ell}$ merged SRSFOS and SRSS. The efficiency is defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level. Efficiencies below 0.002% are rounded to 0. The efficiency values are affected by statistical fluctuations due to the limited number of events.

Efficiencies for signals with $m(\tilde{\chi}^0_1)=100$ GeV in the $m_{3\ell}$ merged SRSFOS and SRSS. The efficiency is defined by the number of events of reconstructed-level signal simulation divided by the number of events obtained at generator level. Efficiencies below 0.002% are rounded to 0. The efficiency values are affected by statistical fluctuations due to the limited number of events.

Summary of the number of events passing each selection for the $m(\tilde{\ell}_{\text{L}}^{\pm},\tilde{\chi}^0_3,\tilde{\chi}^0_1)=(300, 200, 100)$, $(550, 300, 100)$, $(450, 180, 100)$ GeV signal points, including all production processes. After the initial selections, the table is split into row blocks per inclusive region, and then further for each SR channel. Flavor-binned SRs are shown for SROS-on-b for reference. The generator level selections require to have two or more leptons.

Summary of the number of events passing each selection for the $m(\tilde{\ell}_{\text{L}}^{\pm},\tilde{\chi}^0_3,\tilde{\chi}^0_1)=(300, 200, 100)$, $(550, 300, 100)$, $(450, 180, 100)$ GeV signal points, including all production processes. After the initial selections, the table is split into row blocks per inclusive region, and then further for each SR channel. Flavor-binned SRs are shown for SROS-off-b for reference. The generator level selections require to have two or more leptons.

Summary of the number of events passing each selection for the $m(\tilde{\ell}_{\text{L}}^{\pm},\tilde{\chi}^0_3,\tilde{\chi}^0_1)=(300, 200, 100)$, $(550, 300, 100)$, $(450, 180, 100)$ GeV signal points, including all production processes. After the initial selections, the table is split into row blocks per inclusive region, and then further for each SR channel. Flavor-binned SRs are shown. The generator level selections require to have two or more leptons.

A comparison of the measured cell $E_T^{miss}$ distribution with that predicted by the two-component model for two pile-up scenarios. The magenta points extend the measured distribution using L1 $E_T^{miss} > 30\,$GeV and L1 $E_T^{miss} > 50\,$GeV data. The red curve is the prediction from the calorimeter-resolution part of the model. The green curve is the high $E_T^{miss}$ tail's probability distribution for the mean number of $pp$ interactions $\mu$ in each figure. The blue curve is the full model prediction computed by combining the $E_T^{miss}$ from these two individual sources shown in red and green, each calculated for $\mu=\langle\mu\rangle$. The black points show the unbiased $E_T^{miss}$ distribution measured in data. Corresponds to a prediction for $\langle\mu\rangle = 25$.

A comparison of the measured cell $E_T^{miss}$ distribution with that predicted by the two-component model for two pile-up scenarios. The magenta points extend the measured distribution using L1 $E_T^{miss} > 30\,$GeV and L1 $E_T^{miss} > 50\,$GeV data. The red curve is the prediction from the calorimeter-resolution part of the model. The green curve is the high $E_T^{miss}$ tail's probability distribution for the mean number of $pp$ interactions $\mu$ in each figure. The blue curve is the full model prediction computed by combining the $E_T^{miss}$ from these two individual sources shown in red and green, each calculated for $\mu=\langle\mu\rangle$. The black points show the unbiased $E_T^{miss}$ distribution measured in data. Corresponds to a prediction for $\langle\mu\rangle = 25$.

A comparison of the measured cell $E_T^{miss}$ distribution with that predicted by the two-component model for two pile-up scenarios. The magenta points extend the measured distribution using L1 $E_T^{miss} > 30\,$GeV and L1 $E_T^{miss} > 50\,$GeV data. The red curve is the prediction from the calorimeter-resolution part of the model. The green curve is the high $E_T^{miss}$ tail's probability distribution for the mean number of $pp$ interactions $\mu$ in each figure. The blue curve is the full model prediction computed by combining the $E_T^{miss}$ from these two individual sources shown in red and green, each calculated for $\mu=\langle\mu\rangle$. The black points show the unbiased $E_T^{miss}$ distribution measured in data. Corresponds to a prediction for $\langle\mu\rangle = 55$.

A comparison of the measured cell $E_T^{miss}$ distribution with that predicted by the two-component model for two pile-up scenarios. The magenta points extend the measured distribution using L1 $E_T^{miss} > 30\,$GeV and L1 $E_T^{miss} > 50\,$GeV data. The red curve is the prediction from the calorimeter-resolution part of the model. The green curve is the high $E_T^{miss}$ tail's probability distribution for the mean number of $pp$ interactions $\mu$ in each figure. The blue curve is the full model prediction computed by combining the $E_T^{miss}$ from these two individual sources shown in red and green, each calculated for $\mu=\langle\mu\rangle$. The black points show the unbiased $E_T^{miss}$ distribution measured in data. Corresponds to a prediction for $\langle\mu\rangle = 55$.

A comparison of the measured cell $E_T^{miss}$ distribution with that predicted by the two-component model for two pile-up scenarios. The magenta points extend the measured distribution using L1 $E_T^{miss} > 30\,$GeV and L1 $E_T^{miss} > 50\,$GeV data. The red curve is the prediction from the calorimeter-resolution part of the model. The green curve is the high $E_T^{miss}$ tail's probability distribution for the mean number of $pp$ interactions $\mu$ in each figure. The blue curve is the full model prediction computed by combining the $E_T^{miss}$ from these two individual sources shown in red and green, each calculated for $\mu=\langle\mu\rangle$. The black points show the unbiased $E_T^{miss}$ distribution measured in data. Corresponds to a prediction for $\langle\mu\rangle = 55$.

A comparison of the measured cell $E_T^{miss}$ distribution with that predicted by the two-component model for two pile-up scenarios. The magenta points extend the measured distribution using L1 $E_T^{miss} > 30\,$GeV and L1 $E_T^{miss} > 50\,$GeV data. The red curve is the prediction from the calorimeter-resolution part of the model. The green curve is the high $E_T^{miss}$ tail's probability distribution for the mean number of $pp$ interactions $\mu$ in each figure. The blue curve is the full model prediction computed by combining the $E_T^{miss}$ from these two individual sources shown in red and green, each calculated for $\mu=\langle\mu\rangle$. The black points show the unbiased $E_T^{miss}$ distribution measured in data. Corresponds to a prediction for $\langle\mu\rangle = 55$.

A comparison of the measured cell $E_T^{miss}$ distribution with that predicted by the two-component model for two pile-up scenarios. The magenta points extend the measured distribution using L1 $E_T^{miss} > 30\,$GeV and L1 $E_T^{miss} > 50\,$GeV data. The red curve is the prediction from the calorimeter-resolution part of the model. The green curve is the high $E_T^{miss}$ tail's probability distribution for the mean number of $pp$ interactions $\mu$ in each figure. The blue curve is the full model prediction computed by combining the $E_T^{miss}$ from these two individual sources shown in red and green, each calculated for $\mu=\langle\mu\rangle$. The black points show the unbiased $E_T^{miss}$ distribution measured in data. Corresponds to a prediction for $\langle\mu\rangle = 55$.

The $E_T^{miss}$ model predicted trigger rate as a function of $\mu$ for the cell $E_T^{miss}$ algorithm with a threshold of $80\,$GeV and $120\,$GeV, assuming no additional pile-up mitigation.

The L1 $E_T^{miss}$ trigger efficiency, shown as a function of $p_T(\mu\mu)$ in $Z\rightarrow\mu\mu$ events.

The efficiencies in the plot are shown for events satisfying a $Z\rightarrow\mu\mu$ selection and with $p_T(\mu\mu)$ larger than $150\,$GeV vs pile-up for each of the four years of data taking.

The L1 $E_T^{miss}$ trigger rate as a function of $\langle\mu\rangle$ for runs in three different periods ($\alpha$, $\beta$, $\gamma$) in the year 2017.

The L1 $E_T^{miss}$ trigger rate as a function of $\langle\mu\rangle$ for runs in three different periods ($\alpha$, $\beta$, $\gamma$) in the year 2017.

The L1 $E_T^{miss}$ trigger rate as a function of $\langle\mu\rangle$ for runs in three different periods ($\alpha$, $\beta$, $\gamma$) in the year 2017.

The L1 $E_T^{miss}$ trigger efficiency is shown as a function of mean pile-up for events satisfying a $Z\rightarrow\mu\mu$ selection and with $p_T(\mu\mu)$ larger than $150\,$GeV in three periods during the year 2017.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $0\leq\langle\mu\rangle < 20$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $0\leq\langle\mu\rangle < 20$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $0\leq\langle\mu\rangle < 20$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $0\leq\langle\mu\rangle < 20$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $0\leq\langle\mu\rangle < 20$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $20\leq\langle\mu\rangle < 30$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $20\leq\langle\mu\rangle < 30$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $20\leq\langle\mu\rangle < 30$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $20\leq\langle\mu\rangle < 30$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $20\leq\langle\mu\rangle < 30$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $30\leq\langle\mu\rangle < 40$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $30\leq\langle\mu\rangle < 40$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $30\leq\langle\mu\rangle < 40$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $30\leq\langle\mu\rangle < 40$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $30\leq\langle\mu\rangle < 40$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $40\leq\langle\mu\rangle$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $40\leq\langle\mu\rangle$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $40\leq\langle\mu\rangle$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $40\leq\langle\mu\rangle$.

Background acceptance vs signal efficiency for each of four individual HLT $E_T^{miss}$ algorithms for a $Z\rightarrow\mu\mu$ selection with $p_T(\mu\mu) > 175\,$GeV for data recorded in the year 2017. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger. $40\leq\langle\mu\rangle$.

Relative background acceptance fraction vs. relative efficiency for two different $p_T(\mu\mu)>150\,$GeV threshold for data recorded in the year 2018. Two of the curves show the performance of the stand-alone cell algorithm and the stand-alone pufit algorithm. The other two show combined algorithms each formed by requiring that the event satisfy both a fixed threshold (either 65 GeV or 70 GeV as shown in the legend) for the cell algorithm and a pufit threshold which varies along the curve. In each plot the background acceptance fractions and the efficiencies are relative to those of the pufit $E_T^{miss} > 110\,$GeV trigger and thus can be greater than one. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger while the cross indicates the performance of the combined (pufit $E_T^{miss}>110\,$GeV and cell $E_T^{miss}>50\,$GeV) trigger.

Relative background acceptance fraction vs. relative efficiency for two different $p_T(\mu\mu)>150\,$GeV threshold for data recorded in the year 2018. Two of the curves show the performance of the stand-alone cell algorithm and the stand-alone pufit algorithm. The other two show combined algorithms each formed by requiring that the event satisfy both a fixed threshold (either 65 GeV or 70 GeV as shown in the legend) for the cell algorithm and a pufit threshold which varies along the curve. In each plot the background acceptance fractions and the efficiencies are relative to those of the pufit $E_T^{miss} > 110\,$GeV trigger and thus can be greater than one. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger while the cross indicates the performance of the combined (pufit $E_T^{miss}>110\,$GeV and cell $E_T^{miss}>50\,$GeV) trigger.

Relative background acceptance fraction vs. relative efficiency for two different $p_T(\mu\mu)>150\,$GeV threshold for data recorded in the year 2018. Two of the curves show the performance of the stand-alone cell algorithm and the stand-alone pufit algorithm. The other two show combined algorithms each formed by requiring that the event satisfy both a fixed threshold (either 65 GeV or 70 GeV as shown in the legend) for the cell algorithm and a pufit threshold which varies along the curve. In each plot the background acceptance fractions and the efficiencies are relative to those of the pufit $E_T^{miss} > 110\,$GeV trigger and thus can be greater than one. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger while the cross indicates the performance of the combined (pufit $E_T^{miss}>110\,$GeV and cell $E_T^{miss}>50\,$GeV) trigger.

Relative background acceptance fraction vs. relative efficiency for two different $p_T(\mu\mu)>150\,$GeV threshold for data recorded in the year 2018. Two of the curves show the performance of the stand-alone cell algorithm and the stand-alone pufit algorithm. The other two show combined algorithms each formed by requiring that the event satisfy both a fixed threshold (either 65 GeV or 70 GeV as shown in the legend) for the cell algorithm and a pufit threshold which varies along the curve. In each plot the background acceptance fractions and the efficiencies are relative to those of the pufit $E_T^{miss} > 110\,$GeV trigger and thus can be greater than one. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger while the cross indicates the performance of the combined (pufit $E_T^{miss}>110\,$GeV and cell $E_T^{miss}>50\,$GeV) trigger.

Relative background acceptance fraction vs. relative efficiency for two different $p_T(\mu\mu)>150\,$GeV threshold for data recorded in the year 2018. Two of the curves show the performance of the stand-alone cell algorithm and the stand-alone pufit algorithm. The other two show combined algorithms each formed by requiring that the event satisfy both a fixed threshold (either 65 GeV or 70 GeV as shown in the legend) for the cell algorithm and a pufit threshold which varies along the curve. In each plot the background acceptance fractions and the efficiencies are relative to those of the pufit $E_T^{miss} > 110\,$GeV trigger and thus can be greater than one. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger while the cross indicates the performance of the combined (pufit $E_T^{miss}>110\,$GeV and cell $E_T^{miss}>50\,$GeV) trigger.

Relative background acceptance fraction vs. relative efficiency for two different $p_T(\mu\mu)>150\,$GeV threshold for data recorded in the year 2018. Two of the curves show the performance of the stand-alone cell algorithm and the stand-alone pufit algorithm. The other two show combined algorithms each formed by requiring that the event satisfy both a fixed threshold (either 65 GeV or 70 GeV as shown in the legend) for the cell algorithm and a pufit threshold which varies along the curve. In each plot the background acceptance fractions and the efficiencies are relative to those of the pufit $E_T^{miss} > 110\,$GeV trigger and thus can be greater than one. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger while the cross indicates the performance of the combined (pufit $E_T^{miss}>110\,$GeV and cell $E_T^{miss}>50\,$GeV) trigger.

Relative background acceptance fraction vs. relative efficiency for two different $p_T(\mu\mu)>150\,$GeV threshold for data recorded in the year 2018. Two of the curves show the performance of the stand-alone cell algorithm and the stand-alone pufit algorithm. The other two show combined algorithms each formed by requiring that the event satisfy both a fixed threshold (either 65 GeV or 70 GeV as shown in the legend) for the cell algorithm and a pufit threshold which varies along the curve. In each plot the background acceptance fractions and the efficiencies are relative to those of the pufit $E_T^{miss} > 110\,$GeV trigger and thus can be greater than one. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger while the cross indicates the performance of the combined (pufit $E_T^{miss}>110\,$GeV and cell $E_T^{miss}>50\,$GeV) trigger.

Relative background acceptance fraction vs. relative efficiency for two different $p_T(\mu\mu)>150\,$GeV threshold for data recorded in the year 2018. Two of the curves show the performance of the stand-alone cell algorithm and the stand-alone pufit algorithm. The other two show combined algorithms each formed by requiring that the event satisfy both a fixed threshold (either 65 GeV or 70 GeV as shown in the legend) for the cell algorithm and a pufit threshold which varies along the curve. In each plot the background acceptance fractions and the efficiencies are relative to those of the pufit $E_T^{miss} > 110\,$GeV trigger and thus can be greater than one. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger while the cross indicates the performance of the combined (pufit $E_T^{miss}>110\,$GeV and cell $E_T^{miss}>50\,$GeV) trigger.

Relative background acceptance fraction vs. relative efficiency for two different $p_T(\mu\mu)>150\,$GeV threshold for data recorded in the year 2018. Two of the curves show the performance of the stand-alone cell algorithm and the stand-alone pufit algorithm. The other two show combined algorithms each formed by requiring that the event satisfy both a fixed threshold (either 65 GeV or 70 GeV as shown in the legend) for the cell algorithm and a pufit threshold which varies along the curve. In each plot the background acceptance fractions and the efficiencies are relative to those of the pufit $E_T^{miss} > 110\,$GeV trigger and thus can be greater than one. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger while the cross indicates the performance of the combined (pufit $E_T^{miss}>110\,$GeV and cell $E_T^{miss}>50\,$GeV) trigger.

Relative background acceptance fraction vs. relative efficiency for two different $p_T(\mu\mu)>150\,$GeV threshold for data recorded in the year 2018. Two of the curves show the performance of the stand-alone cell algorithm and the stand-alone pufit algorithm. The other two show combined algorithms each formed by requiring that the event satisfy both a fixed threshold (either 65 GeV or 70 GeV as shown in the legend) for the cell algorithm and a pufit threshold which varies along the curve. In each plot the background acceptance fractions and the efficiencies are relative to those of the pufit $E_T^{miss} > 110\,$GeV trigger and thus can be greater than one. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger while the cross indicates the performance of the combined (pufit $E_T^{miss}>110\,$GeV and cell $E_T^{miss}>50\,$GeV) trigger.

Relative background acceptance fraction vs. relative efficiency for two different $p_T(\mu\mu)>150\,$GeV threshold for data recorded in the year 2018. Two of the curves show the performance of the stand-alone cell algorithm and the stand-alone pufit algorithm. The other two show combined algorithms each formed by requiring that the event satisfy both a fixed threshold (either 65 GeV or 70 GeV as shown in the legend) for the cell algorithm and a pufit threshold which varies along the curve. In each plot the background acceptance fractions and the efficiencies are relative to those of the pufit $E_T^{miss} > 110\,$GeV trigger and thus can be greater than one. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger while the cross indicates the performance of the combined (pufit $E_T^{miss}>110\,$GeV and cell $E_T^{miss}>50\,$GeV) trigger.

Relative background acceptance fraction vs. relative efficiency for two different $p_T(\mu\mu)>150\,$GeV threshold for data recorded in the year 2018. Two of the curves show the performance of the stand-alone cell algorithm and the stand-alone pufit algorithm. The other two show combined algorithms each formed by requiring that the event satisfy both a fixed threshold (either 65 GeV or 70 GeV as shown in the legend) for the cell algorithm and a pufit threshold which varies along the curve. In each plot the background acceptance fractions and the efficiencies are relative to those of the pufit $E_T^{miss} > 110\,$GeV trigger and thus can be greater than one. The diamond indicates the performance of the pufit $E_T^{miss}>110\,$GeV trigger while the cross indicates the performance of the combined (pufit $E_T^{miss}>110\,$GeV and cell $E_T^{miss}>50\,$GeV) trigger.

Turn-on efficiency curves are shown for $Z\rightarrow\mu\mu$ events for three algorithms: the cell algorithm alone, the pufit algorithm alone and the combined cell+pufit algorithm. The thresholds are set such that the algorithms have equal rates, and the data were recorded in the year 2018. Here the trigger efficiency is shown with respect to $p_T(\mu\mu)$.

Turn-on efficiency curves are shown for $Z\rightarrow\mu\mu$ events for three algorithms: the cell algorithm alone, the pufit algorithm alone and the combined cell+pufit algorithm. The thresholds are set such that the algorithms have equal rates, and the data were recorded in the year 2018. Here the trigger efficiency is shown with respect to the offline $E_T^{miss}$ calculation with muons treated as being invisible.

Efficiencies for $Z\rightarrow\mu\mu$ events are shown for the L1 $E_T^{miss}>50\,$GeV trigger and for the complete L1+HLT trigger chain that also requires pufit > 110 GeV. Each is shown as a function of $\langle\mu\rangle$ for a $p_T(\mu\mu)$ threshold of 150 GeV.

Efficiencies for $Z\rightarrow\mu\mu$ events are shown for the L1 $E_T^{miss}>50\,$GeV trigger and for the complete L1+HLT trigger chain that also requires pufit > 110 GeV. Each is shown as a function of $\langle\mu\rangle$ for an offline $E_T^{miss}$ threshold of 150 GeV.

Efficiencies for $Z\rightarrow\mu\mu$ events are shown for the L1 $E_T^{miss}>50\,$GeV trigger and for the complete L1+HLT trigger chain that also requires pufit > 110 GeV. Each is shown as a function of $\langle\mu\rangle$ for an $p_T(\mu\mu)$ threshold of 175 GeV.

Efficiencies for $Z\rightarrow\mu\mu$ events are shown for the L1 $E_T^{miss}>50\,$GeV trigger and for the complete L1+HLT trigger chain that also requires pufit > 110 GeV. Each is shown as a function of $\langle\mu\rangle$ for an offline $E_T^{miss}$ threshold of 175 GeV.

HLT_xe70_mht trigger output rate as a function of $\langle\mu\rangle$ shown for an example run in year 2015.

HLT_xe90_mht trigger output rate as a function of $\langle\mu\rangle$ shown for an example run in year 2016.

HLT_xe110_mht trigger output rate as a function of $\langle\mu\rangle$ shown for an example run in year 2016.

HLT_xe110_pufit trigger output rate as a function of $\langle\mu\rangle$ shown for an example run in year 2017. This trigger included an implicit requirement of cell $E_T^{miss}>50\,$GeV.

HLT_xe110_pufit_xe65 trigger output rate as a function of $\langle\mu\rangle$ shown for an example run in year 2018.

HLT_xe110_pufit_xe70 trigger output rate as a function of $\langle\mu\rangle$ shown for an example run in year 2018.

Full-chain trigger efficiencies for each year as a function of $p_T(\mu\mu)$. The efficiency corresponds to that of the lowest unprescaled trigger that is adjusted throughout each year.

Full-chain trigger efficiencies for 2015, 2016, 2017 and 2018 as a function of $\langle\mu\rangle$ for $p_T(\mu\mu)>150$ GeV. The efficiency corresponds to that of the lowest unprescaled trigger that is adjusted throughout the year.

Efficiencies for the first-level trigger L1XE50 and the combined L1+HLT trigger chain HLT_xe110_pufit_xe65_L1XE50 in data recorded in the year 2018 are shown as a function of $\langle\mu\rangle$ for $W\rightarrow e\nu$ and $Z\rightarrow\mu\mu$ selections with offline $E_T^{miss}>150\,$GeV.

Efficiencies for the first-level trigger L1XE50 and the combined L1+HLT trigger chain HLT_xe110_pufit_xe65_L1XE50 in data recorded in the year 2018 are shown as a function of $\langle\mu\rangle$ for $t\bar t$ with offline $E_T^{miss}>150\,$GeV.

Efficiencies for the first-level trigger L1XE50 and the combined L1+HLT trigger chain HLT_xe110_pufit_xe65_L1XE50 in data recorded in the year 2018 are shown as a function of $\langle\mu\rangle$ for $W\rightarrow e\nu$ and $Z\rightarrow\mu\mu$ selections with offline $E_T^{miss}>175\,$GeV.

Efficiencies for the first-level trigger L1XE50 and the combined L1+HLT trigger chain HLT_xe110_pufit_xe65_L1XE50 in data recorded in the year 2018 are shown as a function of $\langle\mu\rangle$ for $t\bar t$ with offline $E_T^{miss}>175\,$GeV.

Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.

Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.

Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.

The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.

The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.

The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.

The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.

The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.

The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.

The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.

The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.

The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.

The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.

The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.

The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.

Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.

Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.

Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.

Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.

Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.

Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.

The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.

The observed 95% CL upper limits with one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.

The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.

Observed $CL_S$ limits on $\sigma \times BR$ for $m_{\Phi} = 200-400$ GeV.

Observed $CL_S$ limits on $\sigma \times BR$ for $m_{\Phi} = 600-1000$ GeV.

Combined limits from this analysis (ID) and the CR and MS analyses for $m_{H} = 125$ GeV, $m_s = 15$ GeV.

Combined limits from this analysis (ID) and the CR and MS analyses for $m_{H} = 125$ GeV, $m_s = 25$ GeV.

Combined limits from this analysis (ID) and the CR and MS analyses for $m_{H} = 125$ GeV, $m_s = 40$ GeV.

Combined limits from this analysis (ID) and the CR and MS analyses for $m_{H} = 125$ GeV, $m_s = 55$ GeV.

Combined limits from this analysis (ID) and the CR and MS analyses for $m_{\Phi} = 200$ GeV, $m_s = 25$ GeV.

Combined limits from this analysis (ID) and the CR and MS analyses for $m_{\Phi} = 200$ GeV, $m_s = 50$ GeV.

Comparison of the IDVx reconstruction and selection efficiency for a Higgs with a mass of 125 GeV decaying to an LLP with a mass of 8 GeV, using only standard tracking versus using standard and large radius tracking for all ID vertices in the signal MC sample.

Comparison of the IDVx reconstruction and selection efficiency for a Higgs with a mass of 125 GeV decaying to an LLP with a mass of 8 GeV, using only standard tracking versus using standard and large radius tracking for ID vertices passing the full IDVx selection criteria.

Comparison of the IDVx reconstruction and selection efficiency for a $\Phi$ with a mass of 1000 GeV decaying to an LLP with a mass of 150 GeV, using only standard tracking versus using standard and large radius tracking for all ID vertices in the signal MC sample.

Comparison of the IDVx reconstruction and selection efficiency for a $\Phi$ with a mass of 1000 GeV decaying to an LLP with a mass of 150 GeV, using only standard tracking versus using standard and large radius tracking for ID vertices passing the full IDVx selection criteria.

The IDVx selection efficiency as a function of long-lived particle decay $z$ position for MC signal samples with a 125 GeV Higgs boson decaying to LLPs with masses of 8, 25, and 55 GeV. The efficiency for the 55 GeV LLP sample is shown both with and without the material veto applied.

The IDVx selection efficiency as a function of long-lived particle decay $z$ position for MC signal samples with mediators of masses 200, 400, and 600 GeV decaying to LLPs with a mass of 50 GeV. The efficiency for the 200 GeV mediator sample is shown both with and without the material veto applied.

The impact of the IDVx selections on the selection efficiency for the MC signal sample with a Higgs with a mass of 125 GeV decaying to an LLP with a mass of 8 GeV.

The impact of the IDVx selections on the selection efficiency for the MC signal sample with a Higgs with a mass of 125 GeV decaying to an LLP with a mass of 8 GeV.

The impact of the IDVx selections on the selection efficiency for the MC signal sample with a Higgs with a mass of 125 GeV decaying to an LLP with a mass of 8 GeV.

The impact of the IDVx selections on the selection efficiency for the MC signal sample with a $\Phi$ with a mass of 400 GeV decaying to an LLP with a mass of 50 GeV.

The impact of the IDVx selections on the selection efficiency for the MC signal sample with a $\Phi$ with a mass of 400 GeV decaying to an LLP with a mass of 50 GeV.

The impact of the IDVx selections on the selection efficiency for the MC signal sample with a $\Phi$ with a mass of 400 GeV decaying to an LLP with a mass of 50 GeV.

The impact of the IDVx selections on the selection efficiency for the MC signal sample with a $\Phi$ with a mass of 1000 GeV decaying to an LLP with a mass of 150 GeV.

The impact of the IDVx selections on the selection efficiency for the MC signal sample with a $\Phi$ with a mass of 1000 GeV decaying to an LLP with a mass of 150 GeV.

The impact of the IDVx selections on the selection efficiency for the MC signal sample with a $\Phi$ with a mass of 1000 GeV decaying to an LLP with a mass of 150 GeV.

$CL_S$ limits on $B_{H\rightarrow ss}$ for $m_{H} = 125$ GeV, $m_s = 8$ GeV.

$CL_S$ limits on $B_{H\rightarrow ss}$ for $m_{H} = 125$ GeV, $m_s = 15$ GeV.

$CL_S$ limits on $B_{H\rightarrow ss}$ for $m_{H} = 125$ GeV, $m_s = 25$ GeV.

$CL_S$ limits on $B_{H\rightarrow ss}$ for $m_{H} = 125$ GeV, $m_s = 40$ GeV.

$CL_S$ limits on $B_{H\rightarrow ss}$ for $m_{H} = 125$ GeV, $m_s = 55$ GeV.

$CL_S$ limits on $\sigma \times B_{\Phi\rightarrow ss}$ for $m_{\Phi} = 200$ GeV, $m_s = 8$ GeV.

$CL_S$ limits on $\sigma \times B_{\Phi\rightarrow ss}$ for $m_{\Phi} = 200$ GeV, $m_s = 25$ GeV.

$CL_S$ limits on $\sigma \times B_{\Phi\rightarrow ss}$ for $m_{\Phi} = 200$ GeV, $m_s = 50$ GeV.

$CL_S$ limits on $\sigma \times B_{\Phi\rightarrow ss}$ for $m_{\Phi} = 400$ GeV, $m_s = 50$ GeV.

$CL_S$ limits on $\sigma \times B_{\Phi\rightarrow ss}$ for $m_{\Phi} = 400$ GeV, $m_s = 100$ GeV.

$CL_S$ limits on $\sigma \times B_{\Phi\rightarrow ss}$ for $m_{\Phi} = 600$ GeV, $m_s = 50$ GeV.

$CL_S$ limits on $\sigma \times B_{\Phi\rightarrow ss}$ for $m_{\Phi} = 600$ GeV, $m_s = 150$ GeV.

$CL_S$ limits on $\sigma \times B_{\Phi\rightarrow ss}$ for $m_{\Phi} = 1000$ GeV, $m_s = 50$ GeV.

$CL_S$ limits on $\sigma \times B_{\Phi\rightarrow ss}$ for $m_{\Phi} = 1000$ GeV, $m_s = 150$ GeV.

$CL_S$ limits on $\sigma \times B_{\Phi\rightarrow ss}$ for $m_{\Phi} = 1000$ GeV, $m_s = 400$ GeV.

The expected 95% CL exclusion contours for the combined fit of SR-lowMass and SR-highMass for simplified models with combined ${\tilde{\tau}}^{+}_{R,L} {\tilde{\tau}}^{-}_{R,L}$ production.

The observed 95% CL exclusion contours for the combined fit of SR-lowMass and SR-highMass for simplified models with ${\tilde{\tau}}_L {\tilde{\tau}}_L$ only production.

The expected 95% CL exclusion contours for the combined fit of SR-lowMass and SR-highMass for simplified models with ${\tilde{\tau}}_L {\tilde{\tau}}_L$ only production.

Observed 95% CL exclusion limits for simplified models with direct stau pair production in SR-lowMass.

Expected 95% CL exclusion limits for simplified models with direct stau pair production in SR-lowMass.

Observed 95% CL exclusion limits for simplified models with direct stau pair production in SR-highMass.

Expected 95% CL exclusion limits for simplified models with direct stau pair production in SR-highMass.

Signal acceptance in SR highMass for combined stau final states

Signal acceptance in SR lowMass for combined stau final states

Signal efficiency in SR highMass for combined stau final states

Signal efficiency in SR lowMass for combined stau final states

Signal acceptance*efficiency in SR highMass for combined stau final states

Signal acceptance*efficiency in SR lowMass for combined stau final states

Cutflow for two reference points (${\tilde{\tau}}^{+}_{R,L} {\tilde{\tau}}^{-}_{R,L}$ production) in SR. The column labelled $N_{weighted}$ shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$, while $N_{raw}$ in brackets shows the results for the generated number of events. The quoted uncertainties are statistical only. The "Generator filter" includes the requirements that two $\tau$ in the event have ${p}_{T} > 15$ GeV and $|\eta| <$ 2.6. The "Baseline Cut" includes the requirement of two baseline $\tau$ with a minimum value at 0.01 of the boosted decision tree discriminant (JetBDTSigTransMin $>$ 0.01) and ${p}_{T, \tau_{1}} > 50$ GeV and ${p}_{T, \tau_{2}} > 40$ GeV. At the step "Trigger & offline cuts", the following requirements are applied: the event is recorded using the asymmetric di-$\tau$ trigger (di-$\tau$ $E_{T}^{miss}$ trigger) in SR-lowMass (SR-highMass), and the lepton $p_{T}$ and $E_{T}^{miss}$ are required at plateau.

Observed and expected numbers of events in the control and signal regions where all control and signal region bins are included as constraints in the likelihood. The expected event yields of SM processes are given after the background-only fit. The entries marked as "--" are negligible. The uncertainties correspond to the sum in quadrature of statistical and systematic uncertainties. The correlation of systematic uncertainties among control regions and among background processes is fully taken into account.

The post-fit $m_{T2}$ distribution for SR-lowMass. The stacked histograms show the expected SM backgrounds. The multi-jet contribution is estimated from data using the ABCD method. The contributions of multi-jet and $W$+jets events are scaled with the corresponding normalization factors derived from the background-only fit. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distributions from the SUSY reference points are also shown as dashed lines. The last bin includes the overflow events.

The post-fit $m_{T2}$ distribution for SR-highMass. The stacked histograms show the expected SM backgrounds. The multi-jet contribution is estimated from data using the ABCD method. The contributions of multi-jet and $W$+jets events are scaled with the corresponding normalization factors derived from the background-only fit. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distributions from the SUSY reference points are also shown as dashed lines. The last bin includes the overflow events.

The $m_{T2}$ post-fit distributions in the multi-jet background validation region VR-F (lowMass). The stacked histograms show the contribution of each relevant SM process. The multi-jet shape is taken from VR-E in the ABCD method and the normalization is determined by the transfer factor $T$ and rescaled by a correction factor determined by the fit. The hatched bands represent the combined statistical and systematic uncertainties in the sum of the SM backgrounds shown. For illustration, the distributions of the SUSY reference points are also shown as dashed lines.

The $m_{T2}$ post-fit distributions in the multi-jet background validation VR-F (highMass). The stacked histograms show the contribution of each relevant SM process. The multi-jet shape is taken from VR-E in the ABCD method and the normalization is determined by the transfer factor $T$ and rescaled by a correction factor determined by the fit. The hatched bands represent the combined statistical and systematic uncertainties in the sum of the SM backgrounds shown. For illustration, the distributions of the SUSY reference points are also shown as dashed lines.

The $E_{T}^{miss}$ post-fit distributions in the multi-jet background validation region VR-F (lowMass). The stacked histograms show the contribution of each relevant SM process. The multi-jet shape is taken from VR-E in the ABCD method and the normalization is determined by the transfer factor $T$ and rescaled by a correction factor determined by the fit. The hatched bands represent the combined statistical and systematic uncertainties in the sum of the SM backgrounds shown. For illustration, the distributions of the SUSY reference points are also shown as dashed lines.

The $E_{T}^{miss}$ post-fit distributions in the multi-jet background validation region VR-F (highMass). The stacked histograms show the contribution of each relevant SM process. The multi-jet shape is taken from VR-E in the ABCD method and the normalization is determined by the transfer factor $T$ and rescaled by a correction factor determined by the fit. The hatched bands represent the combined statistical and systematic uncertainties in the sum of the SM backgrounds shown. For illustration, the distributions of the SUSY reference points are also shown as dashed lines.

The pre-fit $m_{T2}$ distribution in the $WCR$. The SM backgrounds other than multi-jet production are estimated from MC simulation. The multi-jet contribution is estimated from data using the OS--SS method. The hatched bands represent the combined statistical and systematic uncertainties of the total SM background. For illustration, the distributions of the SUSY reference points are also shown as dashed lines.

The post-fit yields in the $WVR$, $TVRs$, $ZVRs$ and $VVVRs$. The SM backgrounds other than multi-jet production are estimated from MC simulation. The multi-jet contribution is negligible and is estimated from data using the ABCD method, using CRs obtained with the same technique used for the SRs. The hatched bands represent the combined statistical and systematic uncertainties of the total SM background. For illustration, the distributions of the SUSY reference points are also shown as dashed lines. The lower panels show the ratio of data to the SM background estimate.

The $L_{T}$ distribution in the MisID-enriched region. The last bin contains the overflow events.

The $L_{T}+p^{miss}_{T}$ distribution in the 3L below-Z signal region. The last bin contains the overflow events.

The $M_{T}$ distribution in the 3L on-Z signal region. The last bin contains the overflow events.

The $L_{T}+p^{miss}_{T}$ distribution in the 3L above-Z signal region. The last bin contains the overflow events.

The $L_{T}+p^{miss}_{T}$ distribution in the 3L OSSF0 signal region. The last bin contains the overflow events.

The $L_{T}+p^{miss}_{T}$ distribution in the 4L OSSF0 signal region. The last bin contains the overflow events.

The $L_{T}+p^{miss}_{T}$ distribution in the 4L OSSF1 signal region. The last bin contains the overflow events.

The $L_{T}+p^{miss}_{T}$ distribution in the 4L OSSF2 signal region. The last bin contains the overflow events.

The dielectron $M_{OSSF}^{20}$ distribution in the 3L(ee) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{300}$ distribution in the 3L(ee) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{20}$ distribution in the 3L(ee) 0B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{300}$ distribution in the 3L(ee) 0B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{20}$ distribution in the 3L(ee) 0B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{300}$ distribution in the 3L(ee) 0B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{20}$ distribution in the 3L(ee) 1B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{300}$ distribution in the 3L(ee) 1B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{20}$ distribution in the 3L(ee) 1B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{300}$ distribution in the 3L(ee) 1B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{20}$ distribution in the 3L(ee) 1B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{300}$ distribution in the 3L(ee) 1B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{20}$ distribution in the 4L(ee) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{300}$ distribution in the 4L(ee) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{20}$ distribution in the 4L(ee) 0B, $S_{T}$>400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{300}$ distribution in the 4L(ee) 0B, $S_{T}$>400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{20}$ distribution in the 4L(ee) 1B signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dielectron $M_{OSSF}^{300}$ distribution in the 4L(ee) 1B signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.

The dimuon $M_{OSSF}^{20}$ distribution in the 3L($\mu\mu$) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{300}$ distribution in the 3L($\mu\mu$) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{20}$ distribution in the 3L($\mu\mu$) 0B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{300}$ distribution in the 3L($\mu\mu$) 0B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{20}$ distribution in the 3L($\mu\mu$) 0B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{300}$ distribution in the 3L($\mu\mu$) 0B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{20}$ distribution in the 3L($\mu\mu$) 1B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{300}$ distribution in the 3L($\mu\mu$) 1B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{20}$ distribution in the 3L($\mu\mu$) 1B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{300}$ distribution in the 3L($\mu\mu$) 1B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{20}$ distribution in the 3L($\mu\mu$) 1B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{300}$ distribution in the 3L($\mu\mu$) 1B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{20}$ distribution in the 4L($\mu\mu$) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{300}$ distribution in the 4L($\mu\mu$) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{20}$ distribution in the 4L($\mu\mu$) 0B, $S_{T}$>400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{300}$ distribution in the 4L($\mu\mu$) 0B, $S_{T}$>400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{20}$ distribution in the 4L($\mu\mu$) 1B signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The dimuon $M_{OSSF}^{300}$ distribution in the 4L($\mu\mu$) 1B signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.

The 95% confidence level exclusion limits for the flavor-democratic scenario on the total production cross section of heavy fermion pairs.

The 95% confidence level exclusion limits on the product of the total production cross section of tt$\phi$(S) and $\mathcal{B}(\phi - {ee})$.

The 95% confidence level exclusion limits on the product of the total production cross section of tt$\phi$(PS) and $\mathcal{B}(\phi - {ee})$.

The 95% confidence level exclusion limits on the product of the total production cross section of tt$\phi$(S) and $\mathcal{B}(\phi - {\mu\mu})$.

The 95% confidence level exclusion limits on the product of the total production cross section of tt$\phi$(PS) and $\mathcal{B}(\phi - {\mu\mu})$.

The 95% confidence level exclusion limits on $g_{t}^2\mathcal{B}(\phi - {ee})$ for tt$\phi$(S).

The 95% confidence level exclusion limits on $g_{t}^2\mathcal{B}(\phi - {ee})$ for tt$\phi$(PS).

The 95% confidence level exclusion limits on $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$ for tt$\phi$(S).

The 95% confidence level exclusion limits on $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$ for tt$\phi$(PS).

Product of the fiducial acceptance and the event selection efficiency for the type-III Seesaw signal model at various signal mass hypotheses calculated after all analysis selection requirements.

Product of the fiducial acceptance and the event selection efficiency for the tt$\phi$ signal models at various signal mass hypotheses calculated after all analysis selection requirements.

Distributions of $m_{T2}$ in VR-top-low for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.

Distributions of $m_{T2}$ in VR-top-high for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.

Distributions of $E_T^{miss}$ in VR-WW-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.

Distributions of $E_T^{miss}$ in VR-WW-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.

Distributions of $E_T^{miss}$ significance in VR-VZ for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.

Distributions of $E_T^{miss}$ significance in VR-top-WW for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow.

Breakdown of the dominant systematic uncertainties on background estimates in the inclusive SRs requiring $m_{T2}$>100 GeV after performing the profile likelihood fit. Note that the individual uncertainties can be correlated, and do not necessarily add up quadratically to the total background uncertainty. The percentages show the size of the uncertainty relative to the total expected background. "Top theoretical uncertainties" refers to $t\bar t$ theoretical uncertainties and the uncertainty associated to $Wt-t\bar t$ interference added quadratically.

Observed events and predicted post-fit background yields for the DF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed events and predicted post-fit background yields for the DF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed events and predicted post-fit background yields for the SF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed events and predicted post-fit background yields for the SF inclusive SRs. The model independent upper limits at 95% confidence level (CL) on the observed and expected number of beyond the SM events $S^{0.95}_{obs/exp}$ and the effective beyond the SM cross-section $\sigma^{0.95}_{obs}$ are also reported. The last row reports the $p_0$-value of the SM-only hypothesis. For SRs where the data yield is smaller than expected, the $p$-value is truncated at 0.50. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$+V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Distributions of $m_{T2}$ in SRSF-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.

Distributions of $m_{T2}$ in SRSF-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.

Distributions of $m_{T2}$ in SRDF-0J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.

Distributions of $m_{T2}$ in SRDF-1J for data and the estimated SM backgrounds. The normalisation factors extracted from the corresponding CRs are used to rescale the $t\bar t$, single top, WW, WZ and ZZ backgrounds. The fake and non-prompt leptons background (FNP) is calculated using the data-driven matrix method. The uncertainty band includes all sources of systematic and statistical errors and the last bin includes the overflow. Distributions for three benchmark signal points are overlaid for comparison.

Observed exclusion limits on SUSY simplified models for chargino-pair production with $W$ boson mediated decays. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for chargino-pair production with $W$ boson mediated decays. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for chargino-pair production with slepton/sneutrino mediated mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for chargino-pair production with slepton/sneutrino mediated mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for slepton-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for slepton-pair production. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for selectron-pair production, with left and right handed selectron production combined. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for selectron-pair production, with left and right handed selectron production combined. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for left-handed selectron-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for left-handed selectron-pair production. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for right-handed selectron-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for right-handed selectron-pair production. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for smuon-pair production, with left and right handed smuon production combined. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for smuon-pair production, with left and right handed smuon production combined. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for left-handed smuon-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for left-handed smuon-pair production. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for right-handed smuon-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for right-handed smuon-pair production. All limits are computed at 95% CL.

Observed events and predicted background yields from the fit in the binned DF SRs with $n_{non-b-tagged jets}=0$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed events and predicted background yields from the fit in the binned DF SRs with $n_{non-b-tagged jets}=1$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed events and predicted background yields from the fit in the binned SF SRs with $n_{non-b-tagged jets}=0$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed events and predicted background yields from the fit in the binned SF SRs with $n_{non-b-tagged jets}=1$. For backgrounds whose normalisation is extracted from the fit in the CRs, the yield expected from the simulation before the fit is also reported. The background denoted as "Other" in the Table includes the non-dominant background sources for this analysis, i.e. Z+jets, $t\bar t$ +V, Higgs and Drell-Yan events. A "–" symbol indicates that the background contribution is negligible.

Observed exclusion limits on SUSY simplified models for left-handed slepton-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for left-handed slepton-pair production. All limits are computed at 95% CL.

Observed exclusion limits on SUSY simplified models for right-handed slepton-pair production. All limits are computed at 95% CL.

Expected exclusion limits on SUSY simplified models for right-handed slepton-pair production. All limits are computed at 95% CL.

Upper limits on signal cross-section (fb) for chargino-pair production with W -boson-mediated decays.

Upper limits on signal cross-section (fb) for chargino-pair production with slepton/sneutrino-mediated decays. The mass relation $m(\tilde{l}_L)=\frac{1}{2}[m(\tilde{\chi}^{\pm}_1 + m(\tilde{\chi}^{0}_1)]$ is assumed.

Upper limits on signal cross-section (fb) for slepton-pair production.

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,105).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[100,105).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,105).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[100,105).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,105).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[100,105).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,105).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[100,105).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[105,110).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[105,110).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[105,110).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[105,110).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[105,110).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[105,110).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[105,110).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[105,110).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[110,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[110,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[110,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[110,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[110,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[110,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[110,120).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[110,120).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,140).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[120,140).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,140).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[120,140).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,140).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[120,140).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,140).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[120,140).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[140,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[140,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[140,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[140,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[140,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[140,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[140,160).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[140,160).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,180).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[160,180).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,180).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[160,180).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,180).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[160,180).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,180).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[160,180).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[180,220).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[180,220).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[180,220).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[180,220).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[180,220).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[180,220).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[180,220).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[180,220).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[220,260).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[220,260).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[220,260).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[220,260).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[220,260).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[220,260).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[220,260).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[220,260).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[260,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-0J-[260,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[260,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-SF-1J-[260,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[260,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-0J-[260,inf).

Signal Acceptance for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[260,inf).

Signal Efficiency for direct chargino-pair production with W-boson mediated decays in SR-DF-1J-[260,inf).

Cutflow for supersymmetric model where $\tilde{\chi}_1^{\pm}\tilde{\chi}_1^{\mp}$ decay via $W^{\pm}W^{\mp}$. The masses of the two charginos are 300 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 50 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.

Cutflow for supersymmetric model where $\tilde{\chi}_1^{\pm}\tilde{\chi}_1^{\mp}$ decay via slepton-neutrino/sneutrino-lepton pair. The masses of the two charginos are 600 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 1 GeV. The slepton/sneutrino masses are 300 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.

Cutflow for supersymmetric model where $\tilde\ell\tilde\ell$ are produced. Only $\tilde{e}$ and $\tilde{\mu}$ are considered in this model. The masses of the two sleptons are 400 GeV, while the mass of $\tilde{\chi}_1^{0}$ is 200 GeV. The numbers are normalised to the luminosity of 139~fb$^{-1}$.

Dependence of the overall signal efficiency on the pT of the long-lived Z' for Z' -> ee. The error bars indicate the total uncertainties.

Dependence of the overall signal efficiency on the transverse decay radius Rxy of the long-lived Z' for Z' -> emu. The error bars indicate the total uncertainties.

Dependence of the overall signal efficiency on the pT of the long-lived Z' for Z' -> emu. The error bars indicate the total uncertainties.

Dependence of the overall signal efficiency on the transverse decay radius Rxy of the long-lived Z' for Z' -> mumu. The error bars indicate the total uncertainties.

Dependence of the overall signal efficiency on the pT of the long-lived Z' for Z' -> mumu. The error bars indicate the total uncertainties.

Overall signal efficiency as a function of the mean proper lifetime (ctau) of the neutralino for the lambda121 scenario of the RPV SUSY model. The error bars indicate the total uncertainties.

Overall signal efficiency as a function of the mean proper lifetime (ctau) of the neutralino for the lambda122 scenario of the RPV SUSY model. The error bars indicate the total uncertainties.

95% CL upper limits on the squark-antisquark production cross-section as a function of the mean proper lifetime (ctau) of the neutralino for the lambda121 scenario of the RPV SUSY model and a 700 GeV squark. The uncertainties of the expected limit indicate the +-1sigma variations.

95% CL upper limits on the squark-antisquark production cross-section as a function of the mean proper lifetime (ctau) of the neutralino for the lambda122 scenario of the RPV SUSY model and a 700 GeV squark. The uncertainties of the expected limit indicate the +-1sigma variations.

95% CL upper limits on the squark-antisquark production cross-section as a function of the mean proper lifetime (ctau) of the neutralino for the lambda121 scenario of the RPV SUSY model and a 1600 GeV squark. The uncertainties of the expected limit indicate the +-1sigma variations.

95% CL upper limits on the squark-antisquark production cross-section as a function of the mean proper lifetime (ctau) of the neutralino for the lambda122 scenario of the RPV SUSY model and a 1600 GeV squark. The uncertainties of the expected limit indicate the +-1sigma variations.

Fraction of detector volume covered by the material veto as a function of z and Rxy of the displaced dilepton vertex.

Fraction of detector volume covered by the disabled pixel modules veto veto as a function of z and Rxy of the displaced dilepton vertex.

Observed Rxy distribution of vertices composed of two non-leptonic tracks in a control sample in the data and the predicted distribution obtained from the event mixing. The error bars indicate the statistical uncertainties.

Rxy distributions of Kshort vertices from the large radius tracking in the data and background MC samples. Data has been normalised such that the total number of Kshort from the standard tracking in the data agrees with the total number of Kshort from the standard tracking in the MC. The error bars indicate the statistical uncertainties.

Acceptance per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> eenu. The error bars indicate the statistical uncertainties.

Acceptance per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> emunu. The error bars indicate the statistical uncertainties.

Acceptance per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> mumunu. The error bars indicate the statistical uncertainties.

Detection efficiency per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> eenu. The error bars indicate the total uncertainties.

Detection efficiency per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> emunu. The error bars indicate the total uncertainties.

Detection efficiency per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> mumunu. The error bars indicate the total uncertainties.

Overall signal efficiency (acceptance times efficiency) per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> eenu. The error bars indicate the total uncertainties.

Overall signal efficiency (acceptance times efficiency) per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> emunu. The error bars indicate the total uncertainties.

Overall signal efficiency (acceptance times efficiency) per decay as a function of the mean proper lifetime (ctau) of the neutralino for neutralino -> mumunu. The error bars indicate the total uncertainties.

Detection efficiency per decay for Rxy < 22 mm as a function of the invariant mass and pT of the electron pair in LLP -> eeX.

Detection efficiency per decay for 22 <= Rxy < 38 mm as a function of the invariant mass and pT of the electron pair in LLP -> eeX.

Detection efficiency per decay for 38 <= Rxy < 73 mm as a function of the invariant mass and pT of the electron pair in LLP -> eeX.

Detection efficiency per decay for 73 <= Rxy < 111 mm as a function of the invariant mass and pT of the electron pair in LLP -> eeX.

Detection efficiency per decay for 111 <= Rxy < 145 mm as a function of the invariant mass and pT of the electron pair in LLP -> eeX.

Detection efficiency per decay for 145 <= Rxy < 300 mm as a function of the invariant mass and pT of the electron pair in LLP -> eeX.

Detection efficiency per decay for Rxy < 22 mm as a function of the invariant mass and pT of the electron and muon pair in LLP -> emuX.

Detection efficiency per decay for 22 <= Rxy < 38 mm as a function of the invariant mass and pT of the electron and muon pair in LLP -> emuX.

Detection efficiency per decay for 38 <= Rxy < 73 mm as a function of the invariant mass and pT of the electron and muon pair in LLP -> emuX.

Detection efficiency per decay for 73 <= Rxy < 111 mm as a function of the invariant mass and pT of the electron and muon pair in LLP -> emuX.

Detection efficiency per decay for 111 <= Rxy < 145 mm as a function of the invariant mass and pT of the electron and muon pair in LLP -> emuX.

Detection efficiency per decay for 145 <= Rxy < 300 mm as a function of the invariant mass and pT of the electron and muon pair in LLP -> emuX.

Detection efficiency per decay for Rxy < 22 mm as a function of the invariant mass and pT of the muon pair in LLP -> mumuX.

Detection efficiency per decay for 22 <= Rxy < 38 mm as a function of the invariant mass and pT of the muon pair in LLP -> mumuX.

Detection efficiency per decay for 38 <= Rxy < 73 mm as a function of the invariant mass and pT of the muon pair in LLP -> mumuX.

Detection efficiency per decay for 73 <= Rxy < 111 mm as a function of the invariant mass and pT of the muon pair in LLP -> mumuX.

Detection efficiency per decay for 111 <= Rxy < 145 mm as a function of the invariant mass and pT of the muon pair in LLP -> mumuX.

Detection efficiency per decay for 145 <= Rxy < 300 mm as a function of the invariant mass and pT of the muon pair in LLP -> mumuX.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 100 GeV and LLP -> ee.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 100 GeV and LLP -> emu.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 100 GeV and LLP -> mumu.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 250 GeV and LLP -> ee.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 250 GeV and LLP -> emu.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 250 GeV and LLP -> mumu.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 500 GeV and LLP -> ee.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 500 GeV and LLP -> emu.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 500 GeV and LLP -> mumu.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 750 GeV and LLP -> ee.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 750 GeV and LLP -> emu.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 750 GeV and LLP -> mumu.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 1000 GeV and LLP -> ee.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 1000 GeV and LLP -> emu.

Detection efficiency per decay as a function of the transverse decay radius Rxy and the dilepton pT for a LLP mass of 1000 GeV and LLP -> mumu.

Acceptance, detection efficiency, and overall signal efficiency in the Z' toy model for mZ' = 100 GeV, three mean proper lifetimes (ctau) and the three decay modes of the Z'.

Acceptance, detection efficiency, and overall signal efficiency in the Z' toy model for mZ' = 250 GeV, three mean proper lifetimes (ctau) and the three decay modes of the Z'.

Acceptance, detection efficiency, and overall signal efficiency in the Z' toy model for mZ' = 500 GeV, three mean proper lifetimes (ctau) and the three decay modes of the Z'.

Acceptance, detection efficiency, and overall signal efficiency in the Z' toy model for mZ' = 750 GeV, three mean proper lifetimes (ctau) and the three decay modes of the Z'.

Acceptance, detection efficiency, and overall signal efficiency in the Z' toy model for mZ' = 1000 GeV, three mean proper lifetimes (ctau) and the three decay modes of the Z'.

Upper limits at the 95% CL on the cross section for SSM $W^\prime$ production and decay to the muon+neutrino channel as a function of the $W^\prime$ pole mass.

Combined (electron and muon channels) upper limits at the 95% CL on the cross section for SSM $W^\prime$ production and decay to a single lepton generation as a function of the $W^\prime$ pole mass.

Observed upper limits at the 95% CL on the cross section for generic $W^\prime$ production and decay to the electron+neutrino channel as a function of the $W^\prime$ pole mass.

Observed upper limits at the 95% CL on the cross section for generic $W^\prime$ production and decay to the muon+neutrino channel as a function of the $W^\prime$ pole mass.

Combined (electron and muon channels) observed upper limits at the 95% CL on the cross section for generic $W^\prime$ production and decay to a single lepton generation as a function of the $W^\prime$ pole mass.

Observed upper limits at the 95% CL on the visible cross section in the electron+neutrino channel as a function of the transverse mass threshold.

Observed upper limits at the 95% CL on the visible cross section in the muon+neutrino channel as a function of the transverse mass threshold.

Product of acceptance and efficiency for the electron and muon selections as a function of the $W^\prime$ pole mass.

Expected upper limits at the 95% CL on the cross section for generic $W^\prime$ production and decay to the electron+neutrino channel as a function of the $W^\prime$ pole mass.

Expected upper limits at the 95% CL on the cross section for generic $W^\prime$ production and decay to the muon+neutrino channel as a function of the $W^\prime$ pole mass.

Combined (electron and muon channels) expected upper limits at the 95% CL on the cross section for generic $W^\prime$ production and decay to a single lepton generation as a function of the $W^\prime$ pole mass.

Observed 95% confidence-level upper limits on the cross section for Drell-Yan spin-1/2 HECO production as a function of mass for various values of electric charge in the range $20\le|z|\le100$.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=1g_\textrm{D}$ monopoles of mass 200 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=1g_\textrm{D}$ monopoles of mass 500 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=1g_\textrm{D}$ monopoles of mass 1000 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=1g_\textrm{D}$ monopoles of mass 1500 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=1g_\textrm{D}$ monopoles of mass 2000 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=1g_\textrm{D}$ monopoles of mass 2500 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=1g_\textrm{D}$ monopoles of mass 3000 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=1g_\textrm{D}$ monopoles of mass 4000 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=2g_\textrm{D}$ monopoles of mass 200 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=2g_\textrm{D}$ monopoles of mass 500 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=2g_\textrm{D}$ monopoles of mass 1000 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=2g_\textrm{D}$ monopoles of mass 1500 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=2g_\textrm{D}$ monopoles of mass 2000 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=2g_\textrm{D}$ monopoles of mass 2500 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=2g_\textrm{D}$ monopoles of mass 3000 GeV.

Selection efficiency as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for $g=2g_\textrm{D}$ monopoles of mass 4000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=20$ of mass 200 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=20$ of mass 500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=20$ of mass 1000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=20$ of mass 1500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=20$ of mass 2000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=20$ of mass 2500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=20$ of mass 3000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=20$ of mass 4000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=40$ of mass 200 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=40$ of mass 500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=40$ of mass 1000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=40$ of mass 1500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=40$ of mass 2000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=40$ of mass 2500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=40$ of mass 3000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=40$ of mass 4000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=60$ of mass 200 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=60$ of mass 500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=60$ of mass 1000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=60$ of mass 1500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=60$ of mass 2000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=60$ of mass 2500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=60$ of mass 3000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=60$ of mass 4000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=80$ of mass 200 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=80$ of mass 500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=80$ of mass 1000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=80$ of mass 1500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=80$ of mass 2000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=80$ of mass 2500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=80$ of mass 3000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=80$ of mass 4000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=100$ of mass 200 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=100$ of mass 500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=100$ of mass 1000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=100$ of mass 1500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=100$ of mass 2000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=100$ of mass 2500 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=100$ of mass 3000 GeV.

Total selection efficiency (i.e., the fraction of MC HECOs surviving the trigger and offline selection criteria) as a function of transverse kinetic energy $E^\text{kin}_\text{T}=E_\text{kin}\sin\theta$ and pseudorapidity $|\eta|$ for HECOs of charge $|z|=100$ of mass 4000 GeV.