Showing 25 of 174 results
The inclusive top-quark-pair production cross section $\sigma_{t\bar{t}}$ and its ratio to the $Z$-boson production cross section have been measured in proton--proton collisions at $\sqrt{s} = 13.6$ TeV, using 29 fb${}^{-1}$ of data collected in 2022 with the ATLAS experiment at the Large Hadron Collider. Using events with an opposite-charge electron-muon pair and $b$-tagged jets, and assuming Standard Model decays, the top-quark-pair production cross section is measured to be $\sigma_{t\bar{t}} = 850 \pm 3\mathrm{(stat.)}\pm 18\mathrm{(syst.)}\pm 20\mathrm{(lumi.)}$ pb. The ratio of the $t\bar{t}$ and the $Z$-boson production cross sections is also measured, where the $Z$-boson contribution is determined for inclusive $e^+e^-$ and $\mu^+\mu^-$ events in a fiducial phase space. The relative uncertainty on the ratio is reduced compared to the $t\bar{t}$ cross section, thanks to the cancellation of several systematic uncertainties. The result for the ratio, $R_{t\bar{t}/Z} = 1.145 \pm 0.003\mathrm{(stat.)}\pm 0.021\mathrm{(syst.)}\pm 0.002\mathrm{(lumi.)}$ is consistent with the Standard Model prediction using the PDF4LHC21 PDF set.
The fiducial phase-space definition for the $Z$-boson measurement. Born-level leptons are used.
The measured $t\bar{t}$ cross section and the ratio of the cross sections of $t\bar{t}$ and the $Z$-boson. Full phase-space is considered for $t\bar{t}$, while fiducial phase-space is considered for the $Z$-boson.
Table with pre-fit yields in the four regions used in the measurement
Table with post-fit yields in the four regions used in the measurement. The correlations of the nuisance parameters, as obtained by the fit, are considered for the calculation of the uncertainties.
Ratio of the $t\bar{t}$ to the $Z$-boson cross section compared to the predictions for several sets of parton distribution functions. The total cross section for $t\bar{t}$ production and the fiducial cross section for $Z$-boson production are used. The uncertainty on the prediction represents the PDF+$\alpha_{s}$ variations.
Nuisance parameter ranking plot for the $t\bar{t}$ signal-strength. Only the 10 most important nuisance parameters are shown. The impact of each nuisance parameter on the measured cross section, is defined as the shift induced in measured cross-section as the nuisance parameter is shifted by its pre-fit and post-fit uncertainties from its nominal best-fit value and then fixed while all other nuisance parameters profiled.
Nuisance parameter ranking plot for the ratio of the $t\bar{t}$ and $Z$-boson signal-strengths. Only the 10 most important nuisance parameters are shown. The impact of each nuisance parameter on the measured ratio, is defined as the shift induced in measured ratio as the nuisance parameter is shifted by its pre-fit and post-fit uncertainties from its nominal best-fit value and then fixed while all other nuisance parameters profiled.
Nuisance parameter ranking plot for the $Z$-boson signal-strength. Only the 10 most important nuisance parameters are shown. The impact of each nuisance parameter on the measured cross section, is defined as the shift induced in measured cross-section as the nuisance parameter is shifted by its pre-fit and post-fit uncertainties from its nominal best-fit value and then fixed while all other nuisance parameters profiled.
A search for pair production of squarks or gluinos decaying via sleptons or weak bosons is reported. The search targets a final state with exactly two leptons with same-sign electric charge or at least three leptons without any charge requirement. The analysed data set corresponds to an integrated luminosity of 139 fb$^{-1}$ of proton$-$proton collisions collected at a centre-of-mass energy of 13 TeV with the ATLAS detector at the LHC. Multiple signal regions are defined, targeting several SUSY simplified models yielding the desired final states. A single control region is used to constrain the normalisation of the $WZ$+jets background. No significant excess of events over the Standard Model expectation is observed. The results are interpreted in the context of several supersymmetric models featuring R-parity conservation or R-parity violation, yielding exclusion limits surpassing those from previous searches. In models considering gluino (squark) pair production, gluino (squark) masses up to 2.2 (1.7) TeV are excluded at 95% confidence level.
Observed exclusion limits at 95% CL from Fig 7(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Expected exclusion limits at 95% CL from Fig 7(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Observed exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Expected exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Observed exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Expected exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Observed exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Expected exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Observed exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Expected exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Observed exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Expected exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
N-1 distribution for $m_{\mathrm{eff}}$of observed data and expected background in SRGGWZ-H.
N-1 distribution for $E_{\mathrm{T}}^{\mathrm{miss}}$of observed data and expected background in SRGGSlep-M.
N-1 distribution for $\sum{p_{\mathrm{T}}^\mathrm{jet}}$of observed data and expected background in SRUDD-ge2b.
N-1 distribution for $m_{\mathrm{eff}}$of observed data and expected background in SRLQD.
N-1 distribution for $m_{\mathrm{eff}}$of observed data and expected background in SRSSWZ-H.
N-1 distribution for $m_{\mathrm{eff}}$of observed data and expected background in SRSSSlep-H(loose).
Signal acceptance for SRGGWZ-H signal region from Fig 10(c) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRGGWZ-H signal region from Fig 15(c) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRGGWZ-M signal region from Fig 10(b) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRGGWZ-M signal region from Fig 15(b) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRGGWZ-L signal region from Fig 10(a) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRGGWZ-L signal region from Fig 15(a) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRGGSlep-L signal region from Fig 12(a) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRGGSlep-L signal region from Fig 17(a) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRGGSlep-M signal region from Fig 12(b) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRGGSlep-M signal region from Fig 17(b) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRGGSlep-H signal region from Fig 12(c) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRGGSlep-H signal region from Fig 17(c) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRUDD-1b signal region from Fig 14(b) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal efficiency for SRUDD-1b signal region from Fig 19(b) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal acceptance for SRUDD-2b signal region from Fig 14(c) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal efficiency for SRUDD-2b signal region from Fig 19(c) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal acceptance for SRUDD-ge2b signal region from Fig 14(d) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal efficiency for SRUDD-ge2b signal region from Fig 19(d) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal acceptance for SRUDD-ge3b signal region from Fig 14(e) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal efficiency for SRUDD-ge3b signal region from Fig 19(e) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Signal acceptance for SRLQD signal region from Fig 14(a) in a SUSY scenario where direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Signal efficiency for SRLQD signal region from Fig 19(a) in a SUSY scenario where direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Signal acceptance for SRSSWZ-L signal region from Fig 11(a) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSWZ-L signal region from Fig 16(a) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSWZ-ML signal region from Fig 11(b) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSWZ-ML signal region from Fig 16(b) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSWZ-MH signal region from Fig 11(c) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSWZ-MH signal region from Fig 16(c) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSWZ-H signal region from Fig 11(d) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSWZ-H signal region from Fig 16(d) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSSlep-H signal region from Fig 13(d) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSSlep-H signal region from Fig 18(d) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSSlep-MH signal region from Fig 13(c) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSSlep-MH signal region from Fig 18(c) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSSlep-L signal region from Fig 13(a) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSSlep-L signal region from Fig 18(a) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSSlep-ML signal region from Fig 13(b) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSSlep-ML signal region from Fig 18(b) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal acceptance for SRSSSlep-H(loose) signal region from Fig 13(e) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Signal efficiency for SRSSSlep-H(loose) signal region from Fig 18(e) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGWZ-H in a susy scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1400 GeV, $m(\tilde{\chi_{1}^{0}})$ = 1000 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGWZ-M in a susy scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1400 GeV, $m(\tilde{\chi_{1}^{0}})$ = 1000 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGWZ-L in a susy scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1400 GeV, $m(\tilde{\chi_{1}^{0}})$ = 1000 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGSlep-L in a susy scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 2000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 500 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGSlep-M in a susy scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 2000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 500 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGSlep-H in a susy scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 2000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 500 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRUDD-1b in a susy scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1600 GeV, $m(\tilde{t})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRUDD-2b in a susy scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1600 GeV, $m(\tilde{t})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRUDD-ge2b in a susy scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1600 GeV, $m(\tilde{t})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRUDD-ge3b in a susy scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1600 GeV, $m(\tilde{t})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRLQD in a susy scenario where direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 2200 GeV, $m(\tilde{\chi_{1}^{0}})$ = 1870 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSWZ-L in a susy scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 800 GeV, $m(\tilde{\chi_{1}^{0}})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSWZ-ML in a susy scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 800 GeV, $m(\tilde{\chi_{1}^{0}})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSWZ-MH in a susy scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 800 GeV, $m(\tilde{\chi_{1}^{0}})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSWZ-H in a susy scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 800 GeV, $m(\tilde{\chi_{1}^{0}})$ = 600 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-H in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-MH in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-L in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-ML in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-H(loose) in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.
Cross-section upper limits at 95% CL from Fig1(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Cross-section upper limits at 95% CL from Fig1(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
Cross-section upper limits at 95% CL from Fig1(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$
Cross-section upper limits at 95% CL from Fig1(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$
Cross-section upper limits at 95% CL from Fig1(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$
Cross-section upper limits at 95% CL from Fig1(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$
The observation of the production of four top quarks in proton-proton collisions is reported, based on a data sample collected by the CMS experiment at a center-of-mass energy of 13 TeV in 2016-2018 at the CERN LHC and corresponding to an integrated luminosity of 138 fb$^{-1}$. Events with two same-sign, three, or four charged leptons (electrons and muons) and additional jets are analyzed. Compared to previous results in these channels, updated identification techniques for charged leptons and jets originating from the hadronization of b quarks, as well as a revised multivariate analysis strategy to distinguish the signal process from the main backgrounds, lead to an improved expected signal significance of 4.9 standard deviations above the background-only hypothesis. Four top quark production is observed with a significance of 5.6 standard deviations, and its cross section is measured to be 17.7 $^{+3.7}_{-3.5}$ (stat) $^{+2.3}_{-1.9}$ (syst) fb, in agreement with the available standard model predictions.
Comparison of fit results in the channels individually and in their combination. The left panel shows the values of the measured cross section relative to the SM prediction from Ref. [6]. The right panel shows the expected and observed significance, with the printed values rounded to the first decimal.
Number of predicted and observed events in the SR-2$\ell$ and SR-3$\ell$ $t\bar{t}t\bar{t}$ classes, both before the fit to the data ("prefit") and with their best fit normalizations ("postfit"). The uncertainties in the predicted number of events include both the statistical and systematic components. The uncertainties in the total number of predicted background and background plus signal events are also given.
A search for supersymmetry targeting the direct production of winos and higgsinos is conducted in final states with either two leptons ($e$ or $\mu$) with the same electric charge, or three leptons. The analysis uses 139 fb$^{-1}$ of $pp$ collision data at $\sqrt{s}=13$ TeV collected with the ATLAS detector during Run 2 of the Large Hadron Collider. No significant excess over the Standard Model expectation is observed. Simplified and complete models with and without $R$-parity conservation are considered. In topologies with intermediate states including either $Wh$ or $WZ$ pairs, wino masses up to 525 GeV and 250 GeV are excluded, respectively, for a bino of vanishing mass. Higgsino masses smaller than 440 GeV are excluded in a natural $R$-parity-violating model with bilinear terms. Upper limits on the production cross section of generic events beyond the Standard Model as low as 40 ab are obtained in signal regions optimised for these models and also for an $R$-parity-violating scenario with baryon-number-violating higgsino decays into top quarks and jets. The analysis significantly improves sensitivity to supersymmetric models and other processes beyond the Standard Model that may contribute to the considered final states.
Observed exclusion limits at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 13(b) and Fig 8(aux).
positive one $\sigma$ observed exclusion limits at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 13(b) and Fig 8(aux).
negative $\sigma$ variation of observed exclusion limits at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 13(b) and Fig 8(aux).
Observed excluded cross-section at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 8(aux).
Expected exclusion limits at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production.
Observed exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from from Fig 13(a) and from Fig 7 and Fig 10(aux).
Observed excluded cross-section at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 7(aux) and Fig 10(aux).
positive one $\sigma$ observed exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from from Fig 13(a) and from Fig 7 and Fig 10(aux).
negative one $\sigma$ observed exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from from Fig 13(a) and from Fig 7 and Fig 10(aux).
Expected exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production.
Expected exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production.
Expected exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region $SR^{bRPV}_{2l-SS}$. in a susy scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV, tan$\beta$=5. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region $SR^{bRPV}_{3l}$. in a susy scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV, tan$\beta$=5. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region $SR^{WZ}_{high-m_{T2}}$. The wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{\pm} _{1}/\tilde{\chi}^{0} _{2})$ = 150 GeV, $m(\tilde{\chi}^{0} _{1})$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region $SR^{WZ}_{low-m_{T2}}$. The wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{\pm} _{1}/\tilde{\chi}^{0} _{2})$ = 150 GeV, $m(\tilde{\chi}^{0} _{1})$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the low mass $SR^{RPV}_{2l1b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the medium mass $SR^{RPV}_{2l1b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the low mass $SR^{RPV}_{2l2b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the medium mass $SR^{RPV}_{2l2b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the high mass $SR^{RPV}_{2l2b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the low mass $SR^{RPV}_{2l3b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the medium mass $SR^{RPV}_{2l3b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the high mass $SR^{RPV}_{2l3b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the $SR^{Wh}_{low-m_{T2} }$. The wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Higgs bosons. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{\pm} _{1}/\tilde{\chi}^{0} _{2})$ = 300 GeV, $m(\tilde{\chi}^{0} _{1})$ = 100 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the $SR^{Wh}_{high-m_{T2} }$. The wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Higgs bosons. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{\pm} _{1}/\tilde{\chi}^{0} _{2})$ = 300 GeV, $m(\tilde{\chi}^{0} _{1})$ = 100 GeV. Only statistical uncertainties are shown.
Signal Hepdataeptance for $SR^{bRPV}_{2l-SS}$ signal region from Fig 13(a)(aux) in a SUSY scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays.
Signal Hepdataeptance for $SR^{bRPV}_{3l}$ signal region from Fig 13(b)(aux) in a SUSY scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays.
Signal acceptance for $SR^{WZ}_{high-m_{T2}}$ in a SUSY scenario where the wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons.
Signal acceptance for $SR^{WZ}_{low-m_{T2}}$ in a SUSY scenario where the wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons.
Signal acceptance for $SR^{RPV}_{2l1b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l1b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l2b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l2b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l2b}-H$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l3b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l3b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l3b}-H$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{bRPV}_{2l-SS}$ signal region in a SUSY scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays.
Signal efficiency for $SR^{bRPV}_{3l}$ signal region in a SUSY scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays.
Signal efficiency for $SR^{WZ}_{high-m_{T2}}$ in a SUSY scenario where the wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons.
Signal efficiency for $SR^{WZ}_{low-m_{T2}}$ in a SUSY scenario where the wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons.
Signal efficiency for $SR^{RPV}_{2l1b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l1b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l2b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l2b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l2b}-H$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l3b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l3b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l3b}-H$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{Wh}_{high-m_{T2} }$ signal region from Fig 11(a)(aux) in a SUSY scenario where direct production of a lightest $\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$ , decay with 100% branching ratio to a final state with a same sign light lepton (e or $\mu$) pair and two lightest neutralino1, via the on-shell emission of SM W and Higgs bosons,
Signal acceptance for $SR^{Wh}_{low-m_{T2} }$ signal region from Fig 11(b)(aux) in a SUSY scenario where direct production of a lightest $\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$ , decay with 100% branching ratio to a final state with a same sign light lepton (e or $\mu$) pair and two lightest neutralino1, via the on-shell emission of SM W and Higgs bosons,
Signal efficiency for $SR^{Wh}_{high-m_{T2} }$ signal region from Fig 15(a)(aux) in a SUSY scenario where direct production of a lightest $\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$ , decay with 100% branching ratio to a final state with a same sign light lepton (e or $\mu$) pair and two lightest neutralino1, via the on-shell emission of SM W and Higgs bosons,
Signal efficiency for $SR^{Wh}_{low-m_{T2} }$ signal region from Fig 15(b)(aux) in a SUSY scenario where direct production of a lightest $\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$ , decay with 100% branching ratio to a final state with a same sign light lepton (e or $\mu$) pair and two lightest neutralino1, via the on-shell emission of SM W and Higgs bosons,
Observed 95% X-section upper limits as a function of higgsino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{1}/\tilde{\chi}^{0}_{2}$ mass in the bilinear RPV model from Fig 14.
Observed 95% X-section upper limits as a function of higgsino $\tilde{\chi}^{0}_{1}/\tilde{\chi}^{0}_{2}$ mass in the UDD RPV model from Fig 18.
Observed 95% X-section upper limits as a function of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ mass in the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 9(aux).
N-1 distributions for $m_{T2}$ of observed data and expected background towards $SR^{WZ}_{high-m_{T2}}$ from publication's Figure 11(a) . The last bin is inclusive.
N-1 distributions for $m_{T2}$ of observed data and expected background towards $SR^{WZ}_{low-m_{T2}}$ from publication's Figure 11(b) . The last bin is inclusive.
N-1 distributions for $m_{T2}$ of observed data and expected background towards $SR^{bRPV}_{2l-SS}$ from publication's Figure 11(c) . The last bin is inclusive.
N-1 distributions for $m_{T2}$ of observed data and expected background towards $SR^{bRPV}_{3l}$ from publication's Figure 11(d) . The last bin is inclusive.
N-1 distributions for $\sum p^{b-jet}_{T}/\sum p^{jet}_{T}$ of observed data and expected background towards $SR^{RPV}_{2l1b}-L$ from publication's Figure 16(a) . The last bin is inclusive.
N-1 distributions for $\sum p^{b-jet}_{T}/\sum p^{jet}_{T}$ of observed data and expected background towards $SR^{RPV}_{2l2b}-M$ from publication's Figure 16(b) . The last bin is inclusive.
N-1 distributions for $\sum p^{b-jet}_{T}/\sum p^{jet}_{T}$ of observed data and expected background towards $SR^{RPV}_{2l3b}-H$ from publication's Figure 16(c) . The last bin is inclusive.
N-1 distribution for $E_{T}^{miss}$ in $SR^{Wh}_{high-m_{T2} }$ in ee channel
N-1 distribution for $E_{T}^{miss}$ in $SR^{Wh}_{high-m_{T2} }$ in e$\mu$ channel
N-1 distribution for $E_{T}^{miss}$ in $SR^{Wh}_{high-m_{T2} }$ in $\mu\mu$ channel
N-1 distribution for $\mathcal{S}(E_{T}^{miss})$ in $SR^{Wh}_{low-m_{T2} }$ in ee channel
N-1 distribution for $\mathcal{S}(E_{T}^{miss})$ in $SR^{Wh}_{low-m_{T2} }$ in e$\mu$ channel
N-1 distribution for $\mathcal{S}(E_{T}^{miss})$ in $SR^{Wh}_{low-m_{T2} }$ in $\mu\mu$ channel
The production cross section of a top quark pair in association with a photon is measured in proton-proton collisions in the decay channel with two oppositely charged leptons (e$^\pm\mu^\mp$, e$^+$e$^-$, or $\mu^+\mu^-$). The measurement is performed using 138 fb$^{-1}$ of proton-proton collision data recorded by the CMS experiment at $\sqrt{s} =$ 13 TeV during the 2016-2018 data-taking period of the CERN LHC. A fiducial phase space is defined such that photons radiated by initial-state particles, top quarks, or any of their decay products are included. An inclusive cross section of 175.2 $\pm$ 2.5 (stat) $\pm$ 6.3 (syst) fb is measured in a signal region with at least one jet coming from the hadronization of a bottom quark and exactly one photon with transverse momentum above 20 GeV. Differential cross sections are measured as functions of several kinematic observables of the photon, leptons, and jets, and compared to standard model predictions. The measurements are also interpreted in the standard model effective field theory framework, and limits are found on the relevant Wilson coefficients from these results alone and in combination with a previous CMS measurement of the $\mathrm{t\bar{t}}\gamma$ production process using the lepton+jets final state.
Observed and predicted event yields as a function of $p_{T}(\gamma)$ in the $e\mu$ channel, after the fit to the data.
Observed and predicted event yields as a function of $p_{T}(\gamma)$ in the $ee$ channel, after the fit to the data.
Observed and predicted event yields as a function of $p_{T}(\gamma)$ in the $\mu\mu$ channel, after the fit to the data.
Measured inclusive fiducial $tt\gamma$ production cross section in the dilepton final state for the different dilepton-flavour channels and combined.
Absolute differential $tt\gamma$ production cross section as a function of $p_{T}(\gamma)$ . The values provided in the table are not divided by the bin width.
Absolute differential $tt\gamma$ production cross section as a function of $|\eta |(\gamma)$. The values provided in the table are not divided by the bin width.
Absolute differential $tt\gamma$ production cross section as a function of min $\Delta R(\gamma, \ell)$. The values provided in the table are not divided by the bin width.
Absolute differential $tt\gamma$ production cross section as a function of $\Delta R(\gamma, \ell_{1})$. The values provided in the table are not divided by the bin width.
Absolute differential $tt\gamma$ production cross section as a function of $\Delta R(\gamma, \ell_{2})$. The values provided in the table are not divided by the bin width.
Absolute differential $tt\gamma$ production cross section as a function of min $\Delta R(\gamma, b)$. The values provided in the table are not divided by the bin width.
Absolute differential $tt\gamma$ production cross section as a function of $|\Delta\eta(\ell\ell)|$. The values provided in the table are not divided by the bin width.
Absolute differential $tt\gamma$ production cross section as a function of $\Delta \phi(\ell\ell)$. The values provided in the table are not divided by the bin width.
Absolute differential $tt\gamma$ production cross section as a function of $p_{T}(\ell\ell) $. The values provided in the table are not divided by the bin width.
Absolute differential $tt\gamma$ production cross section as a function of $p_{T}(\ell_{1})+p_{T}(\ell_{2})$ . The values provided in the table are not divided by the bin width.
Absolute differential $tt\gamma$ production cross section as a function of min $\Delta R(\ell, j)$. The values provided in the table are not divided by the bin width.
Absolute differential $tt\gamma$ production cross section as a function of $p_{T}(j_{1})$ .
Normalized differential $tt\gamma$ production cross section as a function of $p_{T}(\gamma)$ . The values provided in the table are not divided by the bin width.
Normalized differential $tt\gamma$ production cross section as a function of $|\eta |(\gamma)$. The values provided in the table are not divided by the bin width.
Normalized differential $tt\gamma$ production cross section as a function of min $\Delta R(\gamma, \ell)$. The values provided in the table are not divided by the bin width.
Normalized differential $tt\gamma$ production cross section as a function of $\Delta R(\gamma, \ell_{1})$. The values provided in the table are not divided by the bin width.
Normalized differential $tt\gamma$ production cross section as a function of $\Delta R(\gamma, \ell_{2})$. The values provided in the table are not divided by the bin width.
Normalized differential $tt\gamma$ production cross section as a function of min $\Delta R(\gamma, b)$. The values provided in the table are not divided by the bin width.
Normalized differential $tt\gamma$ production cross section as a function of $|\Delta\eta(\ell\ell)|$. The values provided in the table are not divided by the bin width.
Normalized differential $tt\gamma$ production cross section as a function of $\Delta \phi(\ell\ell)$. The values provided in the table are not divided by the bin width.
Normalized differential $tt\gamma$ production cross section as a function of $p_{T}(\ell\ell) $. The values provided in the table are not divided by the bin width.
Normalized differential $tt\gamma$ production cross section as a function of $p_{T}(\ell_{1})+p_{T}(\ell_{2})$ . The values provided in the table are not divided by the bin width.
Normalized differential $tt\gamma$ production cross section as a function of min $\Delta R(\ell, j)$. The values provided in the table are not divided by the bin width.
Normalized differential $tt\gamma$ production cross section as a function of $p_{T}(j_{1})$ . The values provided in the table are not divided by the bin width.
Correlation matrix of the systematic uncertainty in the absolute differential cross section as a function of $p_{T}(\gamma)$ .
Correlation matrix of the statistical uncertainty in the absolute differential cross section as a function of $p_{T}(\gamma)$ .
Correlation matrix of the systematic uncertainty in the absolute differential cross section as a function of $|\eta |(\gamma)$.
Correlation matrix of the statistical uncertainty in the absolute differential cross section as a function of $|\eta |(\gamma)$.
Correlation matrix of the systematic uncertainty in the absolute differential cross section as a function of min $\Delta R(\gamma, \ell)$.
Correlation matrix of the statistical uncertainty in the absolute differential cross section as a function of min $\Delta R(\gamma, \ell)$.
Correlation matrix of the systematic uncertainty in the absolute differential cross section as a function of $\Delta R(\gamma, \ell_{1})$.
Correlation matrix of the statistical uncertainty in the absolute differential cross section as a function of $\Delta R(\gamma, \ell_{1})$.
Correlation matrix of the systematic uncertainty in the absolute differential cross section as a function of $\Delta R(\gamma, \ell_{2})$.
Correlation matrix of the statistical uncertainty in the absolute differential cross section as a function of $\Delta R(\gamma, \ell_{2})$.
Correlation matrix of the systematic uncertainty in the absolute differential cross section as a function of min $\Delta R(\gamma, b)$.
Correlation matrix of the statistical uncertainty in the absolute differential cross section as a function of min $\Delta R(\gamma, b)$.
Correlation matrix of the systematic uncertainty in the absolute differential cross section as a function of $|\Delta\eta(\ell\ell)|$.
Correlation matrix of the statistical uncertainty in the absolute differential cross section as a function of $|\Delta\eta(\ell\ell)|$.
Correlation matrix of the systematic uncertainty in the absolute differential cross section as a function of $\Delta \phi(\ell\ell)$.
Correlation matrix of the statistical uncertainty in the absolute differential cross section as a function of $\Delta \phi(\ell\ell)$.
Correlation matrix of the systematic uncertainty in the absolute differential cross section as a function of $p_{T}(\ell\ell) $.
Correlation matrix of the statistical uncertainty in the absolute differential cross section as a function of $p_{T}(\ell\ell) $.
Correlation matrix of the systematic uncertainty in the absolute differential cross section as a function of $p_{T}(\ell_{1})+p_{T}(\ell_{2})$ .
Correlation matrix of the statistical uncertainty in the absolute differential cross section as a function of $p_{T}(\ell_{1})+p_{T}(\ell_{2})$ .
Correlation matrix of the systematic uncertainty in the absolute differential cross section as a function of min $\Delta R(\ell, j)$.
Correlation matrix of the statistical uncertainty in the absolute differential cross section as a function of min $\Delta R(\ell, j)$.
Correlation matrix of the systematic uncertainty in the absolute differential cross section as a function of $p_{T}(j_{1})$ .
Correlation matrix of the statistical uncertainty in the absolute differential cross section as a function of $p_{T}(j_{1})$ .
Negative log-likelihood difference from the best-fit value for the one-dimensional scans of the Wilson coefficient $c_{tZ}$, using the photon pT distribution from the dilepton analysis. The value of $c^{I}_{tZ}$ is fixed to zero in the fit.
Negative log-likelihood difference from the best-fit value for the one-dimensional scans of the Wilson coefficient $c_{tZ}$, using the combination of photon pT distributions from the dilepton and lepton+jets analyses. The value of $c^{I}_{tZ}$ is fixed to zero in the fit.
Negative log-likelihood difference from the best-fit value for the one-dimensional scans of the Wilson coefficient $c^{I}_{tZ}$, using the photon pT distribution from the dilepton analysis. The value of $c_{tZ}$ is fixed to zero in the fit.
Negative log-likelihood difference from the best-fit value for the one-dimensional scans of the Wilson coefficient $c^{I}_{tZ}$, using the combination of photon pT distributions from the dilepton and lepton+jets analyses. The value of $c_{tZ}$ is fixed to zero in the fit.
Negative log-likelihood difference from the best-fit value for the one-dimensional scans of the Wilson coefficient $c_{tZ}$, using the photon pT distribution from the dilepton analysis. The value of $c^{I}_{tZ}$ is profiled in the fit.
Negative log-likelihood difference from the best-fit value for the one-dimensional scans of the Wilson coefficient $c_{tZ}$, using the combination of photon pT distributions from the dilepton and lepton+jets analyses. The value of $c^{I}_{tZ}$ is profiled in the fit.
Negative log-likelihood difference from the best-fit value for the one-dimensional scans of the Wilson coefficient $c^{I}_{tZ}$, using the photon pT distribution from the dilepton analysis. The value of $c_{tZ}$ is profiled in the fit.
Negative log-likelihood difference from the best-fit value for the one-dimensional scans of the Wilson coefficient $c^{I}_{tZ}$, using the combination of photon pT distributions from the dilepton and lepton+jets analyses. The value of $c_{tZ}$ is profiled in the fit.
Negative log-likelihood difference from the best-fit value as a function of Wilson coefficients $c_{tZ}$ and $c^{I}_{tZ}$ from the interpretation of the dilepton measurement.
Negative log-likelihood difference from the best-fit value as a function of Wilson coefficients $c_{tZ}$ and $c^{I}_{tZ}$ from the interpretation of the dilepton and lepton+jets measurements combined.
One-dimensional 68 and 95% CL intervals obtained for the Wilson coefficients $c_{tZ}$ and $c^{I}_{tZ}$, using the photon $p_{T}$ distribution from the dilepton analysis, or the combination of photon pT distributions from the dilepton and lepton+jets analyses.
Comparison of observed $95\%$ CL intervals for the Wilson coefficients $c_{tZ}$ and $c^{I}_{tZ}$. Results are shown from a CMS ttZ measurement [JHEP 03 (2020) 056], from a CMS ttZ & tZq interpretation [arXiv:2107.13896], from a CMS ttG (lepton+jets) measurement [arXiv:2107.01508], from this measurement, and from a global fit by J. Ellis et al. [JHEP 04 (2021) 279].
The associated production of a Higgs boson and a top-quark pair is measured in events characterised by the presence of one or two electrons or muons. The Higgs boson decay into a $b$-quark pair is used. The analysed data, corresponding to an integrated luminosity of 139 fb$^{-1}$, were collected in proton-proton collisions at the Large Hadron Collider between 2015 and 2018 at a centre-of-mass energy of $\sqrt{s}=13$ TeV. The measured signal strength, defined as the ratio of the measured signal yield to that predicted by the Standard Model, is $0.35^{+0.36}_{-0.34}$. This result is compatible with the Standard Model prediction and corresponds to an observed (expected) significance of 1.0 (2.7) standard deviations. The signal strength is also measured differentially in bins of the Higgs boson transverse momentum in the simplified template cross-section framework, including a bin for specially selected boosted Higgs bosons with transverse momentum above 300 GeV.
Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate prior to any fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate prior to any fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Performance of the Higgs boson reconstruction algorithms. For each row of `truth' ${\hat{p}_{{T}}^{H}}$, the matrix shows (in percentages) the fraction of all Higgs boson candidates with reconstructed $p_T^H$ in the various bins of the dilepton (left), single-lepton resolved (middle) and boosted (right) channels.
Pre-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except for the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor which is not defined pre-fit. The last bin includes the overflow.
Pre-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except for the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor which is not defined pre-fit. The last bin includes the overflow.
Pre-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except for the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor which is not defined pre-fit. The last bin includes the overflow.
Comparison of predicted and observed event yields in each of the control and signal regions in the dilepton channel after the fit to the data. The uncertainty band includes all uncertainties and their correlations.
Comparison of predicted and observed event yields in each of the control and signal regions in the single-lepton channels after the fit to the data. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $120\le p_T^H<200$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $200\le p_T^H<300$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $p_{{T}}^{H}\ge 300$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $120\le p_T^H<200$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $200\le p_T^H<300$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $p_{{T}}^{H}\ge 450$ GeV (yield only). The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton boosted SRs after the inclusive fit to the data for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the BDT discriminant in the single-lepton boosted SRs after the inclusive fit to the data for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for ${\Delta R^{{avg}}_{bb}}$ after the inclusive fit to the data in the single-lepton $CR^{5j}_{{\geq}4b\ lo}$ control region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for ${\Delta R^{{avg}}_{bb}}$ after the inclusive fit to the data in the single-lepton $CR^{5j}_{{\geq}4b\ hi}$ control region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Post-fit yields of signal ($S$) and total background ($B$) as a function of $\log (S/B)$, compared with data. Final-discriminant bins in all dilepton and single-lepton analysis regions are combined into bins of $\log (S/B)$, with the signal normalised to the SM prediction used for the computation of $\log (S/B)$. The signal is then shown normalised to the best-fit value and the SM prediction. The lower frame reports the ratio of data to background, and this is compared with the expected ${t\bar {t}H}$-signal-plus-background yield divided by the background-only yield for the best-fit signal strength (solid red line) and the SM prediction (dashed orange line).
Comparison between data and prediction for the reconstruction BDT score for the Higgs boson candidate identified using Higgs boson information, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the average $\Delta \eta $ between $b$-tagged jets, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the likelihood discriminant, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the average $\Delta R$ for all possible combinations of $b$-tagged jet pairs, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Post-fit distribution of the reconstructed Higgs boson candidate mass for the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Post-fit distribution of the reconstructed Higgs boson candidate mass for the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Post-fit distribution of the reconstructed Higgs boson candidate mass for the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Fitted values of the ${t\bar {t}H}$ signal strength parameter in the individual channels and in the inclusive signal-strength measurement.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the fit. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Pre-fit distribution of the number of jets in the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the Standard Model expectation. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor that is not defined pre-fit.
Pre-fit distribution of the number of jets in the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the Standard Model expectation. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor that is not defined pre-fit.
Pre-fit distribution of the number of jets in the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the Standard Model expectation. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor that is not defined pre-fit.
Post-fit distribution of the number of jets in the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Post-fit distribution of the number of jets in the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Post-fit distribution of the number of jets in the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Post-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The last bin includes the overflow.
Post-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The last bin includes the overflow.
Post-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The last bin includes the overflow.
Signal-strength measurements in the individual STXS ${\hat{p}_{{T}}^{H}}$ bins, as well as the inclusive signal strength.
95% CL simplified template cross-section upper limits in the individual STXS ${\hat{p}_{{T}}^{H}}$ bins, as well as the inclusive limit. The observed limits are shown (solid black lines), together with the expected limits both in the background-only hypothesis (dotted black lines) and in the SM hypothesis (dotted red lines). In the case of the expected limits in the background-only hypothesis, one- and two-standard-deviation uncertainty bands are also shown. The hatched uncertainty bands correspond to the theory uncertainty in the fiducial cross-section prediction in each bin.
The ratios $S/B$ (black solid line, referring to the vertical axis on the left) and $S/\sqrt{B}$ (red dashed line, referring to the vertical axis on the right) for each category in the inclusive analysis in the dilepton channel (left) and in the single-lepton channels (right), where $S$ ($B$) is the number of selected signal (background) events predicted by the simulation and normalised to a luminosity of 139 fb$^{-1}$ .
Comparison between data and prediction for the $\Delta R$ between the Higgs candidate and the ${t\bar {t}}$ candidate system, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the number of $b$-tagged jet pairs with an invariant mass within 30 GeV of 125 GeV, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the reconstruction BDT score for the Higgs boson candidate identified using Higgs boson information, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the $\Delta R$ between the two highest ${p_{{T}}}$ $b$-tagged jets, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.
Comparison between data and prediction for the sum of $b$-tagging discriminants of jets from Higgs, hadronic top and leptonic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the sum of $b$-tagging discriminants of jets from Higgs, hadronic top and leptonic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the hadronic top candidate invariant mass, after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the hadronic top candidate invariant mass, after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the fraction of the sum of $b$-tagging discriminants of all jets not associated to the Higgs or hadronic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Comparison between data and prediction for the fraction of the sum of $b$-tagging discriminants of all jets not associated to the Higgs or hadronic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $0\le {\hat{p}_{{T}}^{H}}<120$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $120\le {\hat{p}_{{T}}^{H}}<200$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $200\le {\hat{p}_{{T}}^{H}}<300$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $300\le {\hat{p}_{{T}}^{H}}<450$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for ${\hat{p}_{{T}}^{H}}\ge 450$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.
95% confidence level upper limits on signal-strength measurements in the individual STXS ${\hat{p}_{{T}}^{H}}$ bins, as well as the inclusive signal-strength limit, after the fit used to extract multiple signal-strength parameters. The observed limits are shown (solid black lines), together with the expected limits both in the background-only hypothesis (dotted black lines) and in the SM hypothesis (dotted red lines). In the case of the expected limits in the background-only hypothesis, one- and two-standard-deviation uncertainty bands are also shown.
Post-fit correlation matrix (in percentages) between the $\mu $ values obtained in the STXS bins.
Performance of the Higgs boson reconstruction algorithms. For each row of `truth' ${\hat{p}_{{T}}^{H}}$, the matrix shows (in percentages) the fraction of Higgs boson candidates which are truth-matched to ${b\bar {b}}$ decays, with reconstructed $p_T^H$ in the various bins of the dilepton (left), single lepton resolved (middle) and boosted (right) channels.
Pre-fit event yields in the dilepton signal regions and control regions. All uncertainties are included except the $k({t\bar {t}+{\geq }1b})$ uncertainty that is not defined pre-fit. For the ${t\bar {t}H}$ signal, the pre-fit yield values correspond to the theoretical prediction and corresponding uncertainties. `Other sources' refers to s-channel, t-channel, $tW$, $tWZ$, $tZq$, $Z+$ jets and diboson events.
Post-fit event yields in the dilepton signal regions and control regions, after the inclusive fit in all channels. All uncertainties are included, taking into account correlations. For the ${t\bar {t}H}$ signal, the post-fit yield and uncertainties correspond to those in the inclusive signal-strength measurement. `Other sources' refers to s-channel, t-channel, $tW$, $tWZ$, $tZq$, $Z+$ jets and diboson events.
Pre-fit event yields in the single-lepton resolved and boosted signal regions and control regions. All uncertainties are included except the $k({t\bar {t}+{\geq }1b})$ uncertainty that is not defined pre-fit. For the ${t\bar {t}H}$ signal, the pre-fit yield values correspond to the theoretical prediction and corresponding uncertainties. `Other top sources' refers to s-channel, t-channel, $tWZ$ and $tZq$ events.
Post-fit event yields in the single-lepton resolved and boosted signal regions and control regions, after the inclusive fit in all channels. All uncertainties are included, taking into account correlations. For the ${t\bar {t}H}$ signal, the post-fit yield and uncertainties correspond to those in the inclusive signal-strength measurement. `Other top sources' refers to s-channel, t-channel, $tWZ$ and $tZq$ events.
Breakdown of the contributions to the uncertainties in $\mu$. The contributions from the different sources of uncertainty are evaluated after the fit. The $\Delta \mu $ values are obtained by repeating the fit after having fixed a certain set of nuisance parameters corresponding to a group of systematic uncertainties, and then evaluating $(\Delta \mu)^2$ by subtracting the resulting squared uncertainty of $\mu $ from its squared uncertainty found in the full fit. The same procedure is followed when quoting the effect of the ${t\bar {t}+{\geq }1b}$ normalisation. The total uncertainty is different from the sum in quadrature of the different components due to correlations between nuisance parameters existing in the fit.
Fraction (in percentages) of signal events, after SR and CR selections, originating from $b\bar {b}$, $WW$ and other remaining Higgs boson decay modes in the dilepton channel.
Fraction (in percentages) of signal events, after SR and CR selections, originating from $b\bar {b}$, $WW$ and other remaining Higgs boson decay modes in the single-lepton channels.
Predicted SM ${t\bar {t}H}$ cross-section in each of the five STXS ${\hat{p}_{{T}}^{H}}$ bins and signal acceptance times efficiency (including all event selection criteria) in each STXS bin as well as for the inclusive ${\hat{p}_{{T}}^{H}}$ range.
Number of expected signal events before the fit, after each selection requirement applied to enter the dilepton channel $SR^{\geq 4j}_{\geq 4b}$ region. All ${t\bar {t}H}$ signal events are included, regardless of the $H$ or ${t\bar {t}H}$ decay mode. All object corrections are applied, except for the initial number of events which is calculated using the NLO QCD+EW theoretical prediction. All quoted numbers are rounded to unity. More details on the selection criteria can be found in the text.
Number of expected signal events before the fit, after each selection requirement applied to enter the single-lepton channel resolved $SR^{\geq 6j}_{\geq 4b}$ region. All ${t\bar {t}H}$ signal events are included, regardless of the $H$ or ${t\bar {t}H}$ decay mode. All object corrections are applied, except for the initial number of events which is calculated using the NLO QCD+EW theoretical prediction. All quoted numbers are rounded to unity. More details on the selection criteria can be found in the text.
Number of expected signal events before the fit, after each selection requirement applied to enter the single-lepton channel boosted $SR_{boosted}$ region. All ${t\bar {t}H}$ signal events are included, regardless of the $H$ or ${t\bar {t}H}$ decay mode. All object corrections are applied, except for the initial number of events which is calculated using the NLO QCD+EW theoretical prediction. All quoted numbers are rounded to unity. More details on the selection criteria can be found in the text.
The production cross section of a top quark pair in association with a photon is measured in proton-proton collisions at a center-of-mass energy of 13 TeV. The data set, corresponding to an integrated luminosity of 137 fb$^{-1}$, was recorded by the CMS experiment during the 2016-2018 data taking of the LHC. The measurements are performed in a fiducial volume defined at the particle level. Events with an isolated, highly energetic lepton, at least three jets from the hadronization of quarks, among which at least one is b tagged, and one isolated photon are selected. The inclusive fiducial $\mathrm{t\overline{t}}\gamma$ cross section, for a photon with transverse momentum greater than 20 GeV and pseudorapidity $\lvert \eta\rvert$$\lt$ 1.4442, is measured to be 798 $\pm$ 7 (stat) $\pm$ 48 (syst) fb, in good agreement with the prediction from the standard model at next-to-leading order in quantum chromodynamics. The differential cross sections are also measured as a function of several kinematic observables and interpreted in the framework of the standard model effective field theory (EFT), leading to the most stringent direct limits to date on anomalous electromagnetic dipole moment interactions of the top quark and the photon.
Distribution of $p_{T}(\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $p_{T}(\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $m_{T}(W)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $m_{T}(W)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $M_{3}$ in the $N_{jet}\geq 3$ signal region.
Distribution of $M_{3}$ in the $N_{jet}\geq 3$ signal region.
Distribution of $m(l,\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $m(l,\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $\Delta R(l,\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $\Delta R(l,\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $\Delta R(j,\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $\Delta R(j,\gamma)$ in the $N_{jet}\geq 3$ signal region.
Fit result of the multijet template obtained with loosely isolated leptons and the electroweak background to the measured $m_{T}(W)$ distribution with isolated leptons in the $N_{jet}=2$, $N_{b jet}=0$ selection for electrons.
Fit result of the multijet template obtained with loosely isolated leptons and the electroweak background to the measured $m_{T}(W)$ distribution with isolated leptons in the $N_{jet}=2$, $N_{b jet}=0$ selection for electrons.
Fit result of the multijet template obtained with loosely isolated leptons and the electroweak background to the measured $m_{T}(W)$ distribution with isolated leptons in the $N_{jet}=2$, $N_{b jet}=0$ selection for muons.
Fit result of the multijet template obtained with loosely isolated leptons and the electroweak background to the measured $m_{T}(W)$ distribution with isolated leptons in the $N_{jet}=2$, $N_{b jet}=0$ selection for muons.
Distribution of the invariant mass of the lepton and the photon ($m(l,\gamma)$) in the $N_{jet}\geq 3$, $N_{b jet}=0$ selection for the e channel.
Distribution of the invariant mass of the lepton and the photon ($m(l,\gamma)$) in the $N_{jet}\geq 3$, $N_{b jet}=0$ selection for the e channel.
Distribution of the invariant mass of the lepton and the photon ($m(l,\gamma)$) in the $N_{jet}\geq 3$, $N_{b jet}=0$ selection for the $\mu$ channel.
Distribution of the invariant mass of the lepton and the photon ($m(l,\gamma)$) in the $N_{jet}\geq 3$, $N_{b jet}=0$ selection for the $\mu$ channel.
Extracted scale factors for the contribution from misidentified electrons for the three data-taking periods, and the Z$\gamma$, W$\gamma$ simulations.
Extracted scale factors for the contribution from misidentified electrons for the three data-taking periods, and the Z$\gamma$, W$\gamma$ simulations.
Predicted and observed yields in the control regions in the $N_{jet}= 3$ and $\geq 4$ seletions using the post-fit values of the nuisance parameters.
Predicted and observed yields in the control regions in the $N_{jet}= 3$ and $\geq 4$ seletions using the post-fit values of the nuisance parameters.
Predicted and observed yields in the signal regions in the $N_{jet}= 3$ and $\geq 4$ seletions using the post-fit values of the nuisance parameters.
Predicted and observed yields in the signal regions in the $N_{jet}= 3$ and $\geq 4$ seletions using the post-fit values of the nuisance parameters.
The measured inclusive ttgamma cross section in the fiducial phase space compared to the prediction from simulation using Madgraph_aMC@NLO at a center-of-mass energy of 13 TeV.
The measured inclusive ttgamma cross section in the fiducial phase space compared to the prediction from simulation using Madgraph_aMC@NLO at a center-of-mass energy of 13 TeV.
Summary of the measured cross section ratios with respect to the NLO cross section prediction for signal regions binned in the electron channel, muon channel and the combined single lepton measurement.
Summary of the measured cross section ratios with respect to the NLO cross section prediction for signal regions binned in the electron channel, muon channel and the combined single lepton measurement.
The unfolded differential cross sections for $p_{T}(\gamma)$ and the comparison to simulations.
The unfolded differential cross sections for $p_{T}(\gamma)$ and the comparison to simulations.
The unfolded differential cross sections for $|\eta(\gamma)|$ and the comparison to simulations.
The unfolded differential cross sections for $|\eta(\gamma)|$ and the comparison to simulations.
The unfolded differential cross sections for $\Delta R(l,\gamma)$ and the comparison to simulations.
The unfolded differential cross sections for $\Delta R(l,\gamma)$ and the comparison to simulations.
The covariance matrix of systematic uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The covariance matrix of systematic uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The covariance matrix of systematic uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The covariance matrix of systematic uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The covariance matrix of systematic uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The covariance matrix of systematic uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The covariance matrix of statistic uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The covariance matrix of statistic uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The covariance matrix of statistic uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The covariance matrix of statistic uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The covariance matrix of statistic uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The covariance matrix of statistic uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The correlation matrix of statistical uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The correlation matrix of statistical uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The correlation matrix of statistical uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The correlation matrix of statistical uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The correlation matrix of statistical uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The correlation matrix of statistical uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The correlation matrix of systematic uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The correlation matrix of systematic uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The correlation matrix of systematic uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The correlation matrix of systematic uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The correlation matrix of systematic uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The correlation matrix of systematic uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
Summary of the one-dimensional intervals at 68 and 95% CL.
Summary of the one-dimensional intervals at 68 and 95% CL.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR3 signal region for the electron channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR3 signal region for the electron channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR3 signal region for the muon channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR3 signal region for the muon channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR4p signal region for the electron channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR4p signal region for the electron channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR4p signal region for the muon channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR4p signal region for the muon channel.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional profiled scan for the Wilson coefficient $c_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional profiled scan for the Wilson coefficient $c_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional profiled scan for the Wilson coefficient $c^{I}_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional profiled scan for the Wilson coefficient $c^{I}_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional scan for the Wilson coefficient $c_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional scan for the Wilson coefficient $c_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional scan for the Wilson coefficient $c^{I}_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional scan for the Wilson coefficient $c^{I}_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the two-dimensional scan for the Wilson coefficients $c_{tZ}$ and $c^{I}_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the two-dimensional scan for the Wilson coefficients $c_{tZ}$ and $c^{I}_{tZ}$.
The results of a search for gluino and squark pair production with the pairs decaying via the lightest charginos into a final state consisting of two $W$ bosons, the lightest neutralinos ($\tilde\chi^0_1$), and quarks, are presented. The signal is characterised by the presence of a single charged lepton ($e^{\pm}$ or $\mu^{\pm}$) from a $W$ boson decay, jets, and missing transverse momentum. The analysis is performed using 139 fb$^{-1}$ of proton-proton collision data taken at a centre-of-mass energy $\sqrt{s}=13$ TeV delivered by the Large Hadron Collider and recorded by the ATLAS experiment. No statistically significant excess of events above the Standard Model expectation is found. Limits are set on the direct production of squarks and gluinos in simplified models. Masses of gluino (squark) up to 2.2 TeV (1.4 TeV) are excluded at 95% confidence level for a light $\tilde\chi^0_1$.
Post-fit $m_{T}$ distribution in the SR 2J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Pre-fit $m_{eff}$ distribution in the TR6J control region. Uncertainties include statistical and systematic uncertainties (added in quadrature). The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Pre-fit $m_{eff}$ distribution in the WR6J control region. Uncertainties include statistical and systematic uncertainties (added in quadrature). The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the TR6J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the WR6J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step x = 1/2 model.
Post-fit $m_{eff}$ distribution in the 4J high-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Expected 95% CL exclusion contours for the gluino one-step x = 1/2 model. space.
Post-fit $m_{eff}$ distribution in the 6J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step variable-x
Post-fit $m_{eff}$ distribution in the 6J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Expected 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for the gluino one-step x = 1/2 model.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the gluino one-step x = 1/2 model. space.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Observed 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-step variable-x
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Expected 95% CL exclusion contours for the squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step x = 1/2
Expected 95% CL exclusion contours for the squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step variable-x
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Upper limits on the signal cross section for simplified model squark one-step x = 1/2
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Upper limits on the signal cross section for simplified model squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step x = 1/2
Upper limits on the signal cross section for simplified model squark one-step x=1/2 in one-flavour schemes
Upper limits on the signal cross section for simplified model gluino one-step variable-x
Upper limits on the signal cross section for simplified model squark one-step variable-x in one-flavour schemes
Upper limits on the signal cross section for simplified model squark one-step x = 1/2
Post-fit $m_{eff}$ distribution in the 2J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step variable-x
Post-fit $m_{eff}$ distribution in the 2J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step x=1/2 in one-flavour schemes
Post-fit $m_{eff}$ distribution in the 4J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step variable-x in one-flavour schemes
Post-fit $m_{eff}$ distribution in the 4J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the TR2J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-tag validation region. Uncertainties include statistical and systematic uncertainties.
Post-fit $m_{eff}$ distribution in the WR2J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-veto validation region. Uncertainties include statistical and systematic uncertainties.
Post-fit $m_{eff}$ distribution in the TR4J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR2JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the WR4J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR2JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 2J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR4JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 2J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR4JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 4J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR6JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 4J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR6JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 6J b-tag validation region. Uncertainties include statistical and systematic uncertainties.
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Post-fit $m_{eff}$ distribution in the 6J b-veto validation region. Uncertainties include statistical and systematic uncertainties.
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR2JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR2JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR4JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR4JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR6JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J discovery high region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR6JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J discovery high region for squark production one-step variable-x simplified models
Signal efficiency in SR2J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal acceptance in SR6J discovery low region for squark production one-step variable-x simplified models
Signal efficiency in SR2J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Angular distributions of the decay B$^+$$\to$ K$^*$(892)$^+\mu^+\mu^-$ are studied using events collected with the CMS detector in $\sqrt{s} =$ 8 TeV proton-proton collisions at the LHC, corresponding to an integrated luminosity of 20.0 fb$^{-1}$. The forward-backward asymmetry of the muons and the longitudinal polarization of the K$^*$(892)$^+$ meson are determined as a function of the square of the dimuon invariant mass. These are the first results from this exclusive decay mode and are in agreement with a standard model prediction.
The measured signal yields, FL, AFB in bins of the dimuon invariant mass squared. The first uncertainty is statistical and the second is systematic.
A search for heavy neutral Higgs bosons is performed using the LHC Run 2 data, corresponding to an integrated luminosity of 139 fb$^{-1}$ of proton-proton collisions at $\sqrt{s}=13$ TeV recorded with the ATLAS detector. The search for heavy resonances is performed over the mass range 0.2-2.5 TeV for the $\tau^+\tau^-$ decay with at least one $\tau$-lepton decaying into final states with hadrons. The data are in good agreement with the background prediction of the Standard Model. In the $M_{h}^{125}$ scenario of the Minimal Supersymmetric Standard Model, values of $\tan\beta>8$ and $\tan\beta>21$ are excluded at the 95% confidence level for neutral Higgs boson masses of 1.0 TeV and 1.5 TeV, respectively, where $\tan\beta$ is the ratio of the vacuum expectation values of the two Higgs doublets.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits with one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
A search for physics beyond the standard model in events with at least three charged leptons (electrons or muons) is presented. The data sample corresponds to an integrated luminosity of 137 fb$^{-1}$ of proton-proton collisions at $\sqrt{s} =$ 13 TeV, collected with the CMS detector at the LHC in 2016-2018. The two targeted signal processes are pair production of type-III seesaw heavy fermions and production of a light scalar or pseudoscalar boson in association with a pair of top quarks. The heavy fermions may be manifested as an excess of events with large values of leptonic transverse momenta or missing transverse momentum. The light scalars or pseudoscalars may create a localized excess in the dilepton mass spectra. The results exclude heavy fermions of the type-III seesaw model for masses below 880 GeV at 95% confidence level in the scenario of equal branching fractions to each lepton flavor. This is the most restrictive limit on the flavor-democratic scenario of the type-III seesaw model to date. Assuming a Yukawa coupling of unit strength to top quarks, branching fractions of new scalar (pseudoscalar) bosons to dielectrons or dimuons above 0.004 (0.03) and 0.04 (0.03) are excluded at 95% confidence level for masses in the range 15-75 and 108-340 GeV, respectively. These are the first limits in these channels on an extension of the standard model with scalar or pseudoscalar particles.
The $M_{T}$ distribution in the WZ-enriched region. The last bin contains the overflow events.
The $L_{T}$ distribution in the ttZ-enriched region. The last bin contains the overflow events.
The $S_{T}$ distribution in the ZZ-enriched region. The last bin contains the overflow events.
The $L_{T}$ distribution in the MisID-enriched region. The last bin contains the overflow events.
The $L_{T}+p^{miss}_{T}$ distribution in the 3L below-Z signal region. The last bin contains the overflow events.
The $M_{T}$ distribution in the 3L on-Z signal region. The last bin contains the overflow events.
The $L_{T}+p^{miss}_{T}$ distribution in the 3L above-Z signal region. The last bin contains the overflow events.
The $L_{T}+p^{miss}_{T}$ distribution in the 3L OSSF0 signal region. The last bin contains the overflow events.
The $L_{T}+p^{miss}_{T}$ distribution in the 4L OSSF0 signal region. The last bin contains the overflow events.
The $L_{T}+p^{miss}_{T}$ distribution in the 4L OSSF1 signal region. The last bin contains the overflow events.
The $L_{T}+p^{miss}_{T}$ distribution in the 4L OSSF2 signal region. The last bin contains the overflow events.
The dielectron $M_{OSSF}^{20}$ distribution in the 3L(ee) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{300}$ distribution in the 3L(ee) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{20}$ distribution in the 3L(ee) 0B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{300}$ distribution in the 3L(ee) 0B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{20}$ distribution in the 3L(ee) 0B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{300}$ distribution in the 3L(ee) 0B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{20}$ distribution in the 3L(ee) 1B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{300}$ distribution in the 3L(ee) 1B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{20}$ distribution in the 3L(ee) 1B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{300}$ distribution in the 3L(ee) 1B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{20}$ distribution in the 3L(ee) 1B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{300}$ distribution in the 3L(ee) 1B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{20}$ distribution in the 4L(ee) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{300}$ distribution in the 4L(ee) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{20}$ distribution in the 4L(ee) 0B, $S_{T}$>400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{300}$ distribution in the 4L(ee) 0B, $S_{T}$>400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{20}$ distribution in the 4L(ee) 1B signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dielectron $M_{OSSF}^{300}$ distribution in the 4L(ee) 1B signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {ee})$=0.05.
The dimuon $M_{OSSF}^{20}$ distribution in the 3L($\mu\mu$) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{300}$ distribution in the 3L($\mu\mu$) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{20}$ distribution in the 3L($\mu\mu$) 0B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{300}$ distribution in the 3L($\mu\mu$) 0B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{20}$ distribution in the 3L($\mu\mu$) 0B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{300}$ distribution in the 3L($\mu\mu$) 0B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{20}$ distribution in the 3L($\mu\mu$) 1B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{300}$ distribution in the 3L($\mu\mu$) 1B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{20}$ distribution in the 3L($\mu\mu$) 1B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{300}$ distribution in the 3L($\mu\mu$) 1B, 400<$S_{T}$<800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{20}$ distribution in the 3L($\mu\mu$) 1B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{300}$ distribution in the 3L($\mu\mu$) 1B, $S_{T}$>800 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{20}$ distribution in the 4L($\mu\mu$) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{300}$ distribution in the 4L($\mu\mu$) 0B, $S_{T}$<400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{20}$ distribution in the 4L($\mu\mu$) 0B, $S_{T}$>400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{300}$ distribution in the 4L($\mu\mu$) 0B, $S_{T}$>400 GeV signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{20}$ distribution in the 4L($\mu\mu$) 1B signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The dimuon $M_{OSSF}^{300}$ distribution in the 4L($\mu\mu$) 1B signal region. The last bin does not contain the overflow events. The signal is shown with $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$=0.05.
The 95% confidence level exclusion limits for the flavor-democratic scenario on the total production cross section of heavy fermion pairs.
The 95% confidence level exclusion limits on the product of the total production cross section of tt$\phi$(S) and $\mathcal{B}(\phi - {ee})$.
The 95% confidence level exclusion limits on the product of the total production cross section of tt$\phi$(PS) and $\mathcal{B}(\phi - {ee})$.
The 95% confidence level exclusion limits on the product of the total production cross section of tt$\phi$(S) and $\mathcal{B}(\phi - {\mu\mu})$.
The 95% confidence level exclusion limits on the product of the total production cross section of tt$\phi$(PS) and $\mathcal{B}(\phi - {\mu\mu})$.
The 95% confidence level exclusion limits on $g_{t}^2\mathcal{B}(\phi - {ee})$ for tt$\phi$(S).
The 95% confidence level exclusion limits on $g_{t}^2\mathcal{B}(\phi - {ee})$ for tt$\phi$(PS).
The 95% confidence level exclusion limits on $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$ for tt$\phi$(S).
The 95% confidence level exclusion limits on $g_{t}^2\mathcal{B}(\phi - {\mu\mu})$ for tt$\phi$(PS).
Product of the fiducial acceptance and the event selection efficiency for the type-III Seesaw signal model at various signal mass hypotheses calculated after all analysis selection requirements.
Product of the fiducial acceptance and the event selection efficiency for the tt$\phi$ signal models at various signal mass hypotheses calculated after all analysis selection requirements.
A search for supersymmetric partners of gluons and quarks is presented, involving signatures with jets and either two isolated leptons (electrons or muons) with the same electric charge, or at least three isolated leptons. A data sample of proton-proton collisions at $\sqrt{s}$ = 13 TeV recorded with the ATLAS detector at the Large Hadron Collider between 2015 and 2018, corresponding to a total integrated luminosity of 139 fb$^{-1}$, is used for the search. No significant excess over the Standard Model expectation is observed. The results are interpreted in simplified supersymmetric models featuring both R-parity conservation and R-parity violation, raising the exclusion limits beyond those of previous ATLAS searches to 1600 GeV for gluino masses and 750 GeV for bottom and top squark masses in these scenarios.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
Results on $\phi$ meson production in inelastic p+p collisions at CERN SPS energies are presented. They are derived from data collected by the NA61/SHINE fixed target experiment, by means of invariant mass spectra fits in the $\phi \to K^+K^-$ decay channel. They include the first ever measured double differential spectra of $\phi$ mesons as a function of rapidity $y$ and transverse momentum $p_T$ for proton beam momenta of 80 GeV/c and 158 GeV/c, as well as single differential spectra of $y$ or $p_T$ for beam momentum of 40 GeV/c. The corresponding total $\phi$ yields per inelastic p+p event are obtained. These results are compared with existing data on $\phi$ meson production in p+p collisions. The comparison shows consistency but superior accuracy of the present measurements. The emission of $\phi$ mesons in p+p reactions is confronted with that occurring in Pb+Pb collisions, and the experimental results are compared with model predictions. It appears that none of the considered models can properly describe all the experimental observables.
Double differential multiplicity of $\phi$ mesons produced in minimum bias p+p collisions at beam momentum of 158 GeV/c, as a function of transverse momentum $p_T$ and rapidity $y$.
Double differential multiplicity of $\phi$ mesons produced in minimum bias p+p collisions at beam momentum of 80 GeV/c, as a function of transverse momentum $p_T$ and rapidity $y$.
Transverse momentum $p_T$ spectrum of $\phi$ mesons produced in minimum bias p+p collisions at beam momentum of 40 GeV/c, in a broad rapidity $y$ bin of (0, 1.5).
Transverse mass $m_T$ spectrum at midrapidity of $\phi$ mesons produced in minimum bias p+p collisions at beam momentum of 158 GeV/c. $m_0$ is the PDG mass of the $\phi$ meson.
Transverse mass $m_T$ spectrum at midrapidity of $\phi$ mesons produced in minimum bias p+p collisions at beam momentum of 80 GeV/c. $m_0$ is the PDG mass of the $\phi$ meson.
Dependence of the slope parameter $T$ of the transverse momentum spectrum on rapidity $y$, of $\phi$ mesons produced in minimum bias p+p collisions at beam momentum of 158 GeV/c.
Dependence of the slope parameter $T$ of the transverse momentum spectrum on rapidity $y$, of $\phi$ mesons produced in minimum bias p+p collisions at beam momentum of 80 GeV/c.
Dependence of the width $\sigma_y$ of the rapidity distributions on $p_T$, of $\phi$ mesons produced in minimum bias p+p collisions at beam momentum of 158 GeV/c.
Dependence of the width $\sigma_y$ of the rapidity distributions on $p_T$, of $\phi$ mesons produced in minimum bias p+p collisions at beam momentum of 80 GeV/c.
Rapidity spectrum of $\phi$ mesons produced in minimum bias p+p collisions at beam momentum of 158 GeV/c.
Rapidity spectrum of $\phi$ mesons produced in minimum bias p+p collisions at beam momentum of 80 GeV/c.
Rapidity spectrum of $\phi$ mesons produced in minimum bias p+p collisions at beam momentum of 40 GeV/c.
Energy dependence of ratios of total yields of $\phi$ mesons to mean total yields of pions produced in in minimum bias p+p collisions at CERN SPS energies.
Energy dependence of double ratios of total yields of $\phi$ mesons to mean total yields of pions in central Pb+Pb collisions over minimum bias p+p collisions at CERN SPS energies.
Energy dependence of total yields of $\phi$ mesons produced in minimum bias p+p collisions at CERN SPS energies.
Energy dependence of midrapidity yields of $\phi$ mesons produced in minimum bias p+p collisions at CERN SPS energies.
Widths of rapidity distributions of $\phi$ mesons produced in minimum bias p+p collisions at CERN SPS energies, as a function of beam rapidity.
Three of the most significant measured deviations from standard model predictions, the enhanced decay rate for B $\to$ D$^{(*)}\tau\nu$, hints of lepton universality violation in B $\to$ K$^{(*)}\ell\ell$ decays, and the anomalous magnetic moment of the muon, can be explained by the existence of leptoquarks (LQs) with large couplings to third-generation quarks and masses at the TeV scale. The existence of these states can be probed at the LHC in high energy proton-proton collisions. A novel search is presented for pair production of LQs coupled to a top quark and a muon using data at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 35.9 fb$^{-1}$, recorded by the CMS experiment. No deviation from the standard model prediction has been observed and scalar LQs decaying exclusively into t$\mu$ are excluded up to masses of 1420 GeV. The results of this search are combined with those from previous searches for LQ decays into t$\tau$ and b$\nu$, which excluded scalar LQs below masses of 900 and 1080 GeV. Vector LQs are excluded up to masses of 1190 GeV for all possible combinations of branching fractions to t$\mu$, t$\tau$ and b$\nu$. With this analysis, all relevant couplings of LQs with an electric charge of -1/3 to third-generation quarks are probed for the first time.
Distributions for $M_{LQ}^{rec}$ (category A) after applying the full selection. All backgrounds are normalized according to the post-fit nuisance parameters based on the corresponding SM cross sections.
Distributions for $S_{T}$ (category B) after applying the full selection and estimating the $t\overline{t}$ and DY+jets background contributions from data in category B. All backgrounds are normalized according to the post-fit nuisance parameters based on the corresponding SM cross sections.
Observed upper limits on the production cross section for pair production of LQs decaying into a top quark and a muon or a $\tau$ lepton at 95% CL in the $M_{LQ} - B(LQ \rightarrow t\mu)$ plane.
Lower mass exclusion limits for scalar and vector LQs.
Observed upper limits on the production cross section for pair production of LQs decaying into a top quark and a muon or bottom quark and a neutrino at 95% CL in the $M_{LQ} - B(LQ \rightarrow t\mu)$ plane.
Lower mass exclusion limits for scalar and vector LQs.
Measurements of the yield and nuclear modification factor, $R_\mathrm{ AA}$, for inclusive jet production are performed using 0.49 nb$^{-1}$ of Pb+Pb data at $\sqrt{s_\mathrm{NN}} = 5.02$ TeV and 25 pb$^{-1}$ of $pp$ data at $\sqrt{s}=5.02$ TeV with the ATLAS detector at the LHC. Jets are reconstructed with the anti-$k_t$ algorithm with radius parameter $R=0.4$ and are measured over the transverse momentum range of 40-1000 GeV in six rapidity intervals covering $|y|<2.8$. The magnitude of $R_\mathrm{ AA}$ increases with increasing jet transverse momentum, reaching a value of approximately 0.6 at 1 TeV in the most central collisions. The magnitude of $R_\mathrm{ AA}$ also increases towards peripheral collisions. The value of $R_\mathrm{ AA}$ is independent of rapidity at low jet transverse momenta, but it is observed to decrease with increasing rapidity at high transverse momenta.
The ⟨TAA⟩ and ⟨Npart⟩ values and their uncertainties in each centrality bin.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
A search for supersymmetric partners of top quarks decaying as $\tilde{t}_1\to c\tilde\chi^0_1$ and supersymmetric partners of charm quarks decaying as $\tilde{c}_1\to c\tilde\chi^0_1$, where $\tilde\chi^0_1$ is the lightest neutralino, is presented. The search uses 36.1 ${\rm fb}^{-1}$ $pp$ collision data at a centre-of-mass energy of 13 TeV collected by the ATLAS experiment at the Large Hadron Collider and is performed in final states with jets identified as containing charm hadrons. Assuming a 100% branching ratio to $c\tilde\chi^0_1$, top and charm squarks with masses up to 850 GeV are excluded at 95% confidence level for a massless lightest neutralino. For $m_{\tilde{t}_1,\tilde{c}_1}-m_{\tilde\chi^0_1}
Acceptance for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for the best expected SR in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR1 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR1 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR1 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR2 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR2 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR2 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR3 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR3 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR3 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR4 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR4 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR4 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR5 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR5 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR5 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for the best expected SR in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for the best expected SR in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Minimum branching ratio excluded at 95% CL, assuming no sensitivity for other decay possibilities, in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Minimum branching ratio excluded at 95% CL, assuming no sensitivity for other decay possibilities, in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Minimum branching ratio excluded at 95% CL, assuming no sensitivity for other decay possibilities, in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
The signal region with the best expected CLS value for each signal in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
The signal region with the best expected CLS value for each signal in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
The signal region with the best expected CLS value for each signal in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR1. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR1. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR1. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR2. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR2. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR2. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR3. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR3. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR3. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR4. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR4. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR4. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR5. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR5. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR5. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (450,425)$ GeV signal point for signal region SR1.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (450,425)$ GeV signal point for signal region SR1.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (450,425)$ GeV signal point for signal region SR1.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,420)$ GeV signal point for signal region SR2.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,420)$ GeV signal point for signal region SR2.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,420)$ GeV signal point for signal region SR2.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,350)$ GeV signal point for signal region SR3.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,350)$ GeV signal point for signal region SR3.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,350)$ GeV signal point for signal region SR3.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (600,350)$ GeV signal point for signal region SR4.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (600,350)$ GeV signal point for signal region SR4.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (600,350)$ GeV signal point for signal region SR4.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (900,1)$ GeV signal point for signal region SR5.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (900,1)$ GeV signal point for signal region SR5.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (900,1)$ GeV signal point for signal region SR5.
A search for high-mass resonances decaying to $\tau\nu$ using proton-proton collisions at $\sqrt{s}$ = 13 TeV produced by the Large Hadron Collider is presented. Only $\tau$-lepton decays with hadrons in the final state are considered. The data were recorded with the ATLAS detector and correspond to an integrated luminosity of 36.1 fb$^{-1}$. No statistically significant excess above the Standard Model expectation is observed; model-independent upper limits are set on the visible $\tau\nu$ production cross section. Heavy $W^{\prime}$ bosons with masses less than 3.7 TeV in the Sequential Standard Model and masses less than 2.2-3.8 TeV depending on the coupling in the non-universal G(221) model are excluded at the 95% credibility level.
Observed and predicted $m_{\rm T}$ distributions including SSM and NU (cot$\phi$ = 5.5) $W^{\prime}$ signals with masses of 3 TeV. Please note that in the paper figure the bin content is divided by the bin width, but this is not done in the HepData table.
Observed and predicted $m_{\rm T}$ distributions including SSM and NU (cot$\phi$ = 5.5) $W^{\prime}$ signals with masses of 3 TeV. Please note that in the paper figure the bin content is divided by the bin width, but this is not done in the HepData table.
Observed and predicted $m_{\rm T}$ distributions including SSM and NU (cot$\phi$ = 5.5) $W^{\prime}$ signals with masses of 3 TeV. Please note that in the paper figure the bin content is divided by the bin width, but this is not done in the HepData table. The table also contains each background contribution to the Standard Model expectation separately with their statistical uncertainties.
Number of expected Standard Model background events including total statistical and systematic uncertainty added in quadrature (calculated before applying the statistical fitting procedure), number of observed events, and the observed and expected 95% CL upper limits on the visible $\tau\nu$ production cross section, $\sigma_{\rm vis} = \sigma(pp \to \tau\nu +X) \cdot \mathcal{A} \cdot \varepsilon$, for $m_{\rm T}$ thresholds ranging from 250 to 1800 GeV. See HepData abstract for details on how to use this data for reinterpretation.
Number of expected Standard Model background events including total statistical and systematic uncertainty added in quadrature (calculated before applying the statistical fitting procedure), number of observed events, and the observed and expected 95% CL upper limits on the visible $\tau\nu$ production cross section, $\sigma_{\rm vis} = \sigma(pp \to \tau\nu +X) \cdot \mathcal{A} \cdot \varepsilon$, for $m_{\rm T}$ thresholds ranging from 250 to 1800 GeV. See HepData abstract for details on how to use this data for reinterpretation.
Number of expected Standard Model background events including total statistical and systematic uncertainty added in quadrature (calculated before applying the statistical fitting procedure), number of observed events, and the observed and expected 95% CL upper limits on the visible $\tau\nu$ production cross section, $\sigma_{\rm vis} = \sigma(pp \to \tau\nu +X) \cdot \mathcal{A} \cdot \varepsilon$, for $m_{\rm T}$ thresholds ranging from 250 to 1800 GeV. See HepData abstract for details on how to use this data for reinterpretation.
Observed and expected 95% CL upper limits on cross section times $\tau\nu$ branching fraction for $W^{\prime}_{\rm SSM}$.
Observed and expected 95% CL upper limits on cross section times $\tau\nu$ branching fraction for $W^{\prime}_{\rm SSM}$.
Observed and expected 95% CL upper limits on cross section times $\tau\nu$ branching fraction for $W^{\prime}_{\rm SSM}$.
Regions of the non-universal G(221) parameter space excluded at 95% CL.
Regions of the non-universal G(221) parameter space excluded at 95% CL.
Regions of the non-universal G(221) parameter space excluded at 95% CL.
Number of expected $W^{\prime}_{\rm SSM}$, $W^{\prime}_{\rm NU}$, Standard Model background and observed events passing the optimal $m_{\rm T}$ threshold for each considered signal mass hypothesis. The expectations include the total statistical and systematic uncertainty added in quadrature. The yields and uncertainties are calculated before applying the statistical fitting procedure.
Number of expected $W^{\prime}_{\rm SSM}$, $W^{\prime}_{\rm NU}$, Standard Model background and observed events passing the optimal $m_{\rm T}$ threshold for each considered signal mass hypothesis. The expectations include the total statistical and systematic uncertainty added in quadrature. The yields and uncertainties are calculated before applying the statistical fitting procedure.
Number of expected $W^{\prime}_{\rm SSM}$, $W^{\prime}_{\rm NU}$, Standard Model background and observed events passing the optimal $m_{\rm T}$ threshold for each considered signal mass hypothesis. The expectations include the total statistical and systematic uncertainty added in quadrature. The yields and uncertainties are calculated before applying the statistical fitting procedure.
Acceptance for $W^{\prime}_{\rm SSM}$ as a function of the $W^{\prime}_{\rm SSM}$ mass, shown after successively applying selection at generator-level. The acceptance times efficiency is calculated with respect to all $W^{\prime}_{\rm SSM} \to \tau\nu$ events with a generated $\tau\nu$ mass above 120 GeV. The "selected tau" criteria include the requirement of a $\tau_{\rm had-vis}$ with $p_{\rm T}$ > 50 GeV and $|\eta|$ < 2.4. The $m_{\rm T}$ threshold for each $W^{\prime}_{\rm SSM}$ mass is defined in Table 5.
Acceptance for $W^{\prime}_{\rm SSM}$ as a function of the $W^{\prime}_{\rm SSM}$ mass, shown after successively applying selection at generator-level. The acceptance times efficiency is calculated with respect to all $W^{\prime}_{\rm SSM} \to \tau\nu$ events with a generated $\tau\nu$ mass above 120 GeV. The "selected tau" criteria include the requirement of a $\tau_{\rm had-vis}$ with $p_{\rm T}$ > 50 GeV and $|\eta|$ < 2.4. The $m_{\rm T}$ threshold for each $W^{\prime}_{\rm SSM}$ mass is defined in Table 5.
Acceptance for $W^{\prime}_{\rm SSM}$ as a function of the $W^{\prime}_{\rm SSM}$ mass, shown after successively applying selection at generator-level. The acceptance times efficiency is calculated with respect to all $W^{\prime}_{\rm SSM} \to \tau\nu$ events with a generated $\tau\nu$ mass above 120 GeV. The "selected tau" criteria include the requirement of a $\tau_{\rm had-vis}$ with $p_{\rm T}$ > 50 GeV and $|\eta|$ < 2.4. The $m_{\rm T}$ threshold for each $W^{\prime}_{\rm SSM}$ mass is defined in Table 5.
Acceptance times efficiency for $W^{\prime}_{\rm SSM}$ as a function of the $W^{\prime}_{\rm SSM}$ mass, shown after successively applying selection at reconstruction-level. The acceptance times efficiency is calculated with respect to all $W^{\prime}_{\rm SSM} \to \tau\nu$ events with a generated $\tau\nu$ mass above 120 GeV. "Preselection" includes all criteria prior to those shown. The $m_{\rm T}$ threshold for each $W^{\prime}_{\rm SSM}$ mass is defined in Table 5.
Acceptance times efficiency for $W^{\prime}_{\rm SSM}$ as a function of the $W^{\prime}_{\rm SSM}$ mass, shown after successively applying selection at reconstruction-level. The acceptance times efficiency is calculated with respect to all $W^{\prime}_{\rm SSM} \to \tau\nu$ events with a generated $\tau\nu$ mass above 120 GeV. "Preselection" includes all criteria prior to those shown. The $m_{\rm T}$ threshold for each $W^{\prime}_{\rm SSM}$ mass is defined in Table 5.
Acceptance times efficiency for $W^{\prime}_{\rm SSM}$ as a function of the $W^{\prime}_{\rm SSM}$ mass, shown after successively applying selection at reconstruction-level. The acceptance times efficiency is calculated with respect to all $W^{\prime}_{\rm SSM} \to \tau\nu$ events with a generated $\tau\nu$ mass above 120 GeV. "Preselection" includes all criteria prior to those shown. The $m_{\rm T}$ threshold for each $W^{\prime}_{\rm SSM}$ mass is defined in Table 5.
Reconstruction efficiency as a function of $m_{\rm T}$ (see HepData abstract for parameterization), defined as the ratio of the number of $\tau\nu$ events remaining after applying the full selection at reconstruction-level to those remaining after applying the fiducial selection at generator-level. The efficiency is largely model independent, with an uncertainty of ~10% due to model choice.
Reconstruction efficiency as a function of $m_{\rm T}$ (see HepData abstract for parameterization), defined as the ratio of the number of $\tau\nu$ events remaining after applying the full selection at reconstruction-level to those remaining after applying the fiducial selection at generator-level. The efficiency is largely model independent, with an uncertainty of ~10% due to model choice.
Reconstruction efficiency as a function of $m_{\rm T}$ (see HepData abstract for parameterization), defined as the ratio of the number of $\tau\nu$ events remaining after applying the full selection at reconstruction-level to those remaining after applying the fiducial selection at generator-level. The efficiency is largely model independent, with an uncertainty of ~10% due to model choice.
A search for heavy neutral Higgs bosons and $Z^{\prime}$ bosons is performed using a data sample corresponding to an integrated luminosity of 36.1 fb$^{-1}$ from proton-proton collisions at $\sqrt{s}$ = 13 TeV recorded by the ATLAS detector at the LHC during 2015 and 2016. The heavy resonance is assumed to decay to $\tau^+\tau^-$ with at least one tau lepton decaying to final states with hadrons and a neutrino. The search is performed in the mass range of 0.2-2.25 TeV for Higgs bosons and 0.2-4.0 TeV for $Z^{\prime}$ bosons. The data are in good agreement with the background predicted by the Standard Model. The results are interpreted in benchmark scenarios. In the context of the hMSSM scenario, the data exclude $\tan\beta > 1.0$ for $m_A$ = 0.25 TeV and $\tan\beta > 42$ for $m_A$ = 1.5 TeV at the 95% confidence level. For the Sequential Standard Model, $Z^{\prime}_\mathrm{SSM}$ with $m_{Z^{\prime}} < 2.42$ TeV is excluded at 95% confidence level, while $Z^{\prime}_\mathrm{NU}$ with $m_{Z^{\prime}} < 2.25$ TeV is excluded for the non-universal $G(221)$ model that exhibits enhanced couplings to third-generation fermions.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Despite listing this as an exclusive final state (as there must be no b-jets), there is no explicit selection on the presence of additional light-flavour jets. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. In the paper, the first bin is cut off at 60 GeV for aesthetics but contains underflows down to 50 GeV as in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 300, 500 and 800 GeV and $\tan\beta$ = 10 in the hMSSM scenario are also provided.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Despite listing this as an exclusive final state (as there must be at least one b-jets), there is no explicit selection on the presence of additional light-flavour jets. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. In the paper, the first bin is cut off at 60 GeV for aesthetics but contains underflows down to 50 GeV as in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 300, 500 and 800 GeV and $\tan\beta$ = 10 in the hMSSM scenario are also provided.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Despite listing this as an exclusive final state (as there must be no b-jets), there is no explicit selection on the presence of additional light-flavour jets. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 300, 500 and 800 GeV and $\tan\beta$ = 10 in the hMSSM scenario are also provided.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Despite listing this as an exclusive final state (as there must be at least one b-jets), there is no explicit selection on the presence of additional light-flavour jets. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 300, 500 and 800 GeV and $\tan\beta$ = 10 in the hMSSM scenario are also provided.
Observed and predicted mTtot distribution for the b-inclusive selection in the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. In the paper, the first bin is cut off at 60 GeV for aesthetics but contains underflows down to 50 GeV as in the HepData table. The last bin includes overflows. The prediction for a SSM Zprime with masses of 1500, 2000 and 2500 GeV are also provided.
Observed and predicted mTtot distribution for the b-inclusive selection in the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The prediction for a SSM Zprime with masses of 1500, 2000 and 2500 GeV are also provided.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the Drell Yan production cross section times ditau branching fraction as a function of the Zprime boson mass.
Observed and expected 95% CL upper limits on the Higgs boson production cross section times ditau branching fraction as a function of the boson mass and the relative strength of the b-associated production.
Ratio of the 95% CL upper limits on the production cross section times branching fraction for alternate Zprime models with respect to the SSM, both observed and expected are shown.
Acceptance, acceptance times efficiency and b-tag category fraction for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance, acceptance times efficiency and b-tag category fraction for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance and acceptance times efficiency for a heavy gauge boson produced by Drell Yan as a function of the gauge boson mass.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times braching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the Higgs boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. Vaules are provided for the fit to the observed data and to the expected data, which is the sum of Standard Model contributions not including the SM Higgs boson. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
We report the first measurement of the longitudinal double-spin asymmetry $A_{LL}$ for mid-rapidity di-jet production in polarized $pp$ collisions at a center-of-mass energy of $\sqrt{s} = 200$ GeV. The di-jet cross section was measured and is shown to be consistent with next-to-leading order (NLO) perturbative QCD predictions. $A_{LL}$ results are presented for two distinct topologies, defined by the jet pseudorapidities, and are compared to predictions from several recent NLO global analyses. The measured asymmetries, the first such correlation measurements, support those analyses that find positive gluon polarization at the level of roughly 0.2 over the region of Bjorken-$x > 0.05$.
Data simulation comparison (with arbitrary normalization). Di-jet invariant mass.
Data simulation comparison (with arbitrary normalization). Difference between jet pseudorapidities.
Data simulation comparison (with arbitrary normalization). Difference between jet azimuthal angles.
The particle-level di-jet differential cross section. The systematic uncertainty on the data contains contributions from track finding efficiency, track transverse momentum resolution, calorimeter energy resolution, and unfolding uncertainties. For the theory, values are given for the underlying event and hadronization (UEH) correction uncertainty and the quadrature sum of the UEH and theoretical uncertainties. Both the UEH and theoretical uncertainties include contributions from factorization and renormalization scale uncertainties and PDF uncertainties. An 8.8% uncertainty common to all points due to the integrated luminosity determination is also present, but not included in the systematic values quoted below.
Values of gluon X1 and X2 obtained from the PYTHIA detector-level simulation for the same-sign di-jet topology compared to the gluon X distribution for inclusive jets. The inclusive distribution has been scaled down by a factor of 20 compared to the di-jet distributions.
Values of gluon X1 and X2 obtained from the PYTHIA detector-level simulation for the opposite-sign di-jet topology compared to the gluon X distribution for inclusive jets. The inclusive distribution has been scaled down by a factor of 20 compared to the di-jet distributions.
Di-jet A_LL asymmetry vs parton-level invariant mass for the same-sign di-jet topology. The systematic uncertainty on the mass includes contributions from jet energy scale, the correction to parton-level, and the difference between NLO and PYTHIA cross sections. The systematic uncertainty on the asymmetry includes contributions from trigger and reconstruction bias and residual transverse beam polarization components. A 6.5% uncertainty common to all points due to uncertainty on the measured beam polarizations is also present, but not included in the uncertainties quoted below.
Theoretical predictions for the di-jet A_LL asymmetry for the same-sign topology using the DSSV14 and NNPDFpol1.1 polarized PDF sets. The DSSV14 prediction is presented without uncertainty while the systematic uncertainty on the NNPDFpol1.1 prediction contains contributions from factorization and renormalization scale uncertainties and PDF uncertainties.
Di-jet A_LL asymmetry vs parton-level invariant mass for the opposite-sign di-jet topology. The systematic uncertainty on the mass includes contributions from jet energy scale, the correction to parton-level, and the difference between NLO and PYTHIA cross sections. The systematic uncertainty on the asymmetry includes contributions from trigger and reconstruction bias and residual transverse beam polarization components. A 6.5% uncertainty common to all points due to uncertainty on the measured beam polarizations is also present, but not included in the uncertainties quoted below.
Theoretical predictions for the di-jet A_LL asymmetry for the opposite-sign topology using the DSSV14 and NNPDFpol1.1 polarized PDF sets. The DSSV14 prediction is presented without uncertainty while the systematic uncertainty on the NNPDFpol1.1 prediction contains contributions from factorization and renormalization scale uncertainties and PDF uncertainties.
A first measurement of the top quark mass using the decay channel t to (W to l nu) (b to J/psi + X to mu+ mu- + X) is presented. The analysis uses events selected from the proton-proton collisions recorded with the CMS detector at the LHC at a center-of-mass energy of 8 TeV. The data correspond to an integrated luminosity of 19.7 inverse femtobarns, with 666 t t-bar and single top quark candidate events containing a reconstructed J/psi candidate decaying into an oppositely-charged muon pair. The mass of the (J/psi + l) system, where l is an electron or a muon from W boson decay, is used to extract a top quark mass of 173.5 +/- 3.0 (stat) +/- 0.9 (syst) GeV.
Number of selected events from simulations and observed in data. The uncertainties are statistical.
Summary of the impact of systematic uncertainties on the top quark mass according to the contributions from each source.
A search for $W^\prime$ bosons in events with one lepton (electron or muon) and missing transverse momentum is presented. The search uses 3.2 fb$^{-1}$ of $pp$ collision data collected at $\sqrt{s} = 13$ TeV by the ATLAS experiment at the LHC in 2015. The transverse mass distribution is examined and no significant excess of events above the level expected from Standard Model processes is observed. Upper limits on the $W^\prime$ boson cross-section times branching ratio to leptons are set as a function of the $W^\prime$ mass. Assuming a $W^\prime$ boson as predicted by the Sequential Standard Model, $W^\prime$ masses below 4.07 TeV are excluded at the 95% confidence level. This extends the limit set using LHC data at $\sqrt{s}=8$ TeV by around 800 GeV.
Observed and predicted electron channel transverse mass (MT) distribution in the search region. The bin width is constant in log(MT).
Observed and predicted muon channel transverse mass (MT) distribution in the search region. The bin width is constant in log(MT).
W' Product of acceptance and efficiency for the electron and muon selections as a function of the SSM W' pole mass.
Median expected and observed 95% CL upper limits on the cross-section times branching ratio (sigma*B) for W'_SSM production for the exclusive muon and electron channels, and for both channels combined.
The results of a search for the stop, the supersymmetric partner of the top quark, in final states with one isolated electron or muon, jets, and missing transverse momentum are reported. The search uses the 2015 LHC $pp$ collision data at a center-of-mass energy of $\sqrt{s}=13$ TeV recorded by the ATLAS detector and corresponding to an integrated luminosity of 3.2 fb${}^{-1}$. The analysis targets two types of signal models: gluino-mediated pair production of stops with a nearly mass-degenerate stop and neutralino; and direct pair production of stops, decaying to the top quark and the lightest neutralino. The experimental signature in both signal scenarios is similar to that of a top quark pair produced in association with large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits on gluino and stop masses are set at 95% confidence level. The results extend the LHC Run-1 exclusion limit on the gluino mass up to 1460 GeV in the gluino-mediated scenario in the high gluino and low stop mass region, and add an excluded stop mass region from 745 to 780 GeV for the direct stop model with a massless lightest neutralino. The results are also reinterpreted to set exclusion limits in a model of vector-like top quarks.
Comparison of data with estimated backgrounds in the $am_\text{T2}$ distribution with the STCR1 event selection except for the requirement on $am_\text{T2}$. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of data with estimated backgrounds in the $b$-tagged jet multiplicity with the STCR1 event selection except for the requirement on the $b$-tagged jet multiplicity. Furthermore, the $\Delta R(b_1,b_2)$ requirement is dropped. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of data with estimated backgrounds in the $\Delta R(b_1,b_2)$ distribution with the STCR1 event selection except for the requirement on $\Delta R(b_1,b_2)$. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of data with estimated backgrounds in the $\tilde{E}_\text{T}^\text{miss}$ distribution with the TZCR1 event selection except for the requirement on $\tilde{E}_\text{T}^\text{miss}$. The variables $\tilde{E}_\text{T}^\text{miss}$ and $\tilde{m}_\text{T}$ are constructed in the same way as $E_\text{T}^\text{miss}$ and $m_\text{T}$ but treating the leading photon transverse momentum as invisible. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of data with estimated backgrounds in the $\tilde{m}_\text{T}$ distribution with the TZCR1 event selection except for the requirement on $\tilde{m}_\text{T}$. The variables $\tilde{E}_\text{T}^\text{miss}$ and $\tilde{m}_\text{T}$ are constructed in the same way as $E_\text{T}^\text{miss}$ and $m_\text{T}$ but treating the leading photon transverse momentum as invisible. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Comparison of the observed data ($n_\text{obs}$) with the predicted background ($n_\text{exp}$) in the validation and signal regions. The background predictions are obtained using the background-only fit configuration. The bottom panel shows the significance of the difference between data and predicted background, where the significance is based on the total uncertainty ($\sigma_\text{tot}$).
Jet multiplicity distributions for events where exactly two signal leptons are selected. No correction factors are included in the background normalizations. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
Jet multiplicity distributions for events where exactly one lepton plus one $\tau$ candidate are selected. No correction factors are included in the background normalizations. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin includes overflow.
The $E_\text{T}^\text{miss}$ distribution in SR1. In the plot, the full event selection in the corresponding signal region is applied, except for the requirement on $E_\text{T}^\text{miss}$. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin contains the overflow. Benchmark signal models are overlaid for comparison. The benchmark models are specified by the gluino and stop masses, given in TeV in the table.
The $m_\text{T}$ distribution in SR1. In the plot, the full event selection in the corresponding signal region is applied, except for the requirement on $m_\text{T}$. The predicted backgrounds are scaled with normalization factors. The uncertainty band includes statistical and all experimental systematic uncertainties. The last bin contains the overflow. Benchmark signal models are overlaid for comparison. The benchmark models are specified by the gluino and stop masses, given in TeV in the table.
Expected (black dashed) 95% excluded regions in the plane of $m_{\tilde{g}}$ versus $m_{\tilde{t}_1}$ for gluino-mediated stop production.
Observed (red solid) 95% excluded regions in the plane of $m_{\tilde{g}}$ versus $m_{\tilde{t}_1}$ for gluino-mediated stop production.
Expected (black dashed) 95% excluded regions in the plane of $m_{\tilde{t}_1}$ versus $m_{\tilde{\chi}_1^0}$ for direct stop production.
Observed (red solid) 95% excluded regions in the plane of $m_{\tilde{t}_1}$ versus $m_{\tilde{\chi}_1^0}$ for direct stop production.
The expected upper limits on $T$ quark pair production times the squared branching ratio for $T \rightarrow tZ$ as a function of the $T$ quark mass.
The observed upper limits on $T$ quark pair production times the squared branching ratio for $T \rightarrow tZ$ as a function of the $T$ quark mass.
The expected limits on $T$ quarks as a function of the branching ratios $B\left(T \rightarrow bW\right)$ and $B\left(T \rightarrow tH\right)$ for a $T$ quark with a mass of 800 GeV. The $T$ is assumed to decay in three possible ways: $T \to tZ$, $T \to tH$, and $T \to bW$.
The observed limits on $T$ quarks as a function of the branching ratios $B\left(T \rightarrow bW\right)$ and $B\left(T \rightarrow tH\right)$ for a $T$ quark with a mass of 800 GeV. The $T$ is assumed to decay in three possible ways: $T \to tZ$, $T \to tH$, and $T \to bW$.
The $m_\text{T}$ distribution in the WVR2-tail validation region which has the same preselection and jet $p_\text{T}$ requirements as SR2.
The $am_\text{T2}$ distribution in the WVR2-tail validation region which has the same preselection and jet $p_\text{T}$ requirements as SR2.
Large-radius jet mass ($R=1.2$), decomposed into the number of small-radius jet constituents. The lower panel shows the ratio of the total data to the total prediction (summed over all jet multiplicities). Events are required to have one lepton, four jets with $p_\text{T}>80,50,40,40$ GeV, at least one $b$-tagged jet, $E_\text{T}^\text{miss}>200$ GeV, and $m_\text{T}>30$ GeV.
Distribution of $m_\text{T2}^\tau$ in data for a selection enriched in $t\bar{t}$ events with one hadronically decaying $\tau$. Events that have no hadronic $\tau$ candidate (that passes the Loose identification criteria, as well as other requirements) are not shown in the plot.
Upper limits on the model cross-section in units of pb for the gluino-mediated stop models.
Upper limits on the model cross-section in units of pb for the models with direct stop pair production.
Illustration of the best expected signal region per signal grid point for the gluino-mediated stop models. This mapping is used for the final combined exclusion limits.
Illustration of the best expected signal region per signal grid point for models with direct stop pair production. This mapping is used for the final combined exclusion limits.
Expected $CL_s$ values for the gluino-mediated stop models.
Observed $CL_s$ values for the gluino-mediated stop models.
Expected $CL_s$ values for the direct stop pair production models.
Observed $CL_s$ values for the direct stop pair production models.
Expected limit using SR1 for models with direct stop pair production and an unpolarized stop (and bino LSP).
Expected limit using SR1 for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Expected limit using SR1 for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Observed limit using SR1 for models with direct stop pair production and an unpolarized stop (and bino LSP).
Observed limit using SR1 for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Observed limit using SR1 for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Expected limit using SR2 for models with direct stop pair production and an unpolarized stop (and bino LSP).
Expected limit using SR2 for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Expected limit using SR2 for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Observed limit using SR2 for models with direct stop pair production and an unpolarized stop (and bino LSP).
Observed limit using SR2 for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Observed limit using SR2 for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Expected limit using SR1+SR2 (best expected) for models with direct stop pair production and an unpolarized stop (and bino LSP).
Expected limit using SR1+SR2 (best expected) for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Expected limit using SR1+SR2 (best expected) for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Observed limit using SR1+SR2 (best expected) for models with direct stop pair production and an unpolarized stop (and bino LSP).
Observed limit using SR1+SR2 (best expected) for models with direct stop pair production with $\tilde{t}_1=\tilde{t}_L$ (and bino LSP).
Observed limit using SR1+SR2 (best expected) for models with direct stop pair production with $\tilde{t}_1\sim\tilde{t}_R$ (and bino LSP).
Acceptance for SR1 in the gluino-mediated stop models. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR1 in the direct stop pair production. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR2 in the gluino-mediated stop models. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR2 in the direct stop pair production. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR3 in the gluino-mediated stop models. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance for SR3 in the direct stop pair production. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Efficiency for SR1 in the gluino-mediated stop models. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR1 in the direct stop pair production. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR2 in the gluino-mediated stop models. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR2 in the direct stop pair production. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR3 in the gluino-mediated stop models. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency for SR3 in the direct stop pair production. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
A search for physics beyond the Standard Model, in final states with at least one high transverse momentum charged lepton (electron or muon) and two additional high transverse momentum leptons or jets, is performed using 3.2 fb$^{-1}$ of proton--proton collision data recorded by the ATLAS detector at the Large Hadron Collider in 2015 at $\sqrt{s}=13$ TeV. The upper end of the distribution of the scalar sum of the transverse momenta of leptons and jets is sensitive to the production of high-mass objects. No excess of events beyond Standard Model predictions is observed. Exclusion limits are set for models of microscopic black holes with two to six extra dimensions.
Background fit results for regions SR-2TeV ( sumPT > 2 TeV) and SR-3TeV ( sumPT > 3 TeV) for the electron and muons channels. The errors shown are the statistical plus systematic uncertainties. The uncertainty in the total background count includes correlations between nuisance parameters and so does not reflect a quadrature sum of the uncertainties in the individual background components.
The sumPT distribution in the W+jets control region (electron channel). Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the W+jets control region (muon channel). Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the Z+jets control region (electron channel). Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the Z+jets control region (muon channel). Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the ttbar control region (electron channel). Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the ttbar control region (muon channel). Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the electron channel. The selection is that of the signal regions except for the final requirement on sumPT. Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the muon channel. The selection is that of the signal regions except for the final requirement on sumPT. Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
Expected and observed exclusion contours in the MTH, MD plane for models of rotating black holes with two, four and six extra dimensions simulated with Charybdis2 1.0.4. Masses below the corresponding lines are excluded.
A search for Supersymmetry involving the pair production of gluinos decaying via third-generation squarks to the lightest neutralino is reported. It uses an LHC proton--proton dataset at a center-of-mass energy $\sqrt{s} = 13$ TeV with an integrated luminosity of 3.2 fb$^{-1}$ collected with the ATLAS detector in 2015. The signal is searched for in events containing several energetic jets, of which at least three must be identified as $b$-jets, large missing transverse momentum and, potentially, isolated electrons or muons. Large-radius jets with a high mass are also used to identify highly boosted top quarks. No excess is found above the predicted background. For neutralino masses below approximately 700 GeV, gluino masses of less than 1.78 TeV and 1.76 TeV are excluded at the 95% CL in simplified models of the pair production of gluinos decaying via sbottom and stop, respectively. These results significantly extend the exclusion limits obtained with the $\sqrt{s} = 8$ TeV dataset.
Distribution of missing transverse energy for SR-Gbb-B.
Distribution of missing transverse energy for SR-Gtt-0L-C.
Distribution of missing transverse energy for SR-Gtt-1L-A.
Expected 95% CL exclusion contour for the Gbb signal.
Observed 95% CL exclusion contour for the Gbb signal.
Expected 95% CL exclusion contour for the Gtt combination.
Observed 95% CL exclusion contour for the Gtt combination.
Acceptances for the Gbb model in SR-Gbb-A. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gbb model in SR-Gbb-B. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gbb model in SR-Gbb-C. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-0L-A. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-0L-B. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-0L-C. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-1L-A. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptances for the Gtt model in SR-Gtt-1L-B. Acceptance is evaluated at truth level, with only leptons from heavy bosons and taus considered, and no further quality or isolation criteria applied in their selection.
Acceptance times efficiency for the Gbb model in SR-Gbb-A.
Acceptance times efficiency for the Gbb model in SR-Gbb-B.
Acceptance times efficiency for the Gbb model in SR-Gbb-C.
Acceptance times efficiency for the Gtt model in SR-Gtt-0L-A.
Acceptance times efficiency for the Gtt model in SR-Gtt-0L-B.
Acceptance times efficiency for the Gtt model in SR-Gtt-0L-C.
Acceptance times efficiency for the Gtt model in SR-Gtt-1L-A.
Acceptance times efficiency for the Gtt model in SR-Gtt-1L-B.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gbb model in SR-Gbb-A.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gbb model in SR-Gbb-B.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gbb model in SR-Gbb-C.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-0L-A.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-0L-B.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-0L-C.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-1L-A.
95% CL upper limit on the cross-section times branching ratio (in fb) for the Gtt model in SR-Gtt-1L-B.
Signal region yielding the best expected sensitivity for each point of the parameter space in the Gbb model.
Signal region yielding the best expected sensitivity for each point of the parameter space in the Gtt model for the 0-lepton channel.
Signal region yielding the best expected sensitivity for each point of the parameter space in the Gtt model for the 1-lepton channel.
Combination of two 0-lepton and 1-lepton signal regions yielding the best expected sensitivity for each point of the parameter space in the Gtt model.
An inclusive search for a new-physics signature of lepton-jet resonances has been performed by the ATLAS experiment. Scalar leptoquarks, pair-produced in $pp$ collisions at $\sqrt{s}$ = 13 TeV at the Large Hadron Collider, have been considered. An integrated luminosity of 3.2 fb$^{-1}$, corresponding to the full 2015 dataset was used. First (second) generation leptoquarks were sought in events with two electrons (muons) and two or more jets. The observed event yield in each channel is consistent with Standard Model background expectations. The observed (expected) lower limits on the leptoquark mass at 95% confidence level are 1100 GeV and 1050 GeV (1160 GeV and 1040 GeV) for first and second generation leptoquarks, respectively, assuming a branching ratio into a charged lepton and a quark of 100%. Upper limits on the aforementioned branching ratio are also given as a function of leptoquark mass. Compared with the results of earlier ATLAS searches, the sensitivity is increased for leptoquark masses above 860 GeV, and the observed exclusion limits confirm and extend the published results.
Normalisation factors for the main backgrounds obtained from the combined fit in each of the channels. The total uncertainty is given.
Search for the first generation leptoquarks (LQs). Event yields in the Z control region (CR), ttbar CR and in the signal region (SR). Each CR is treated as one bin in the profile likelihood fit. The SR is split to 7 bins according to $m_{\text{LQ}}^{\text{min}}$ for the fit. The table below shows the total number of events in each CR. For the SR, it shows the number of events per 100 GeV as a function of $m_{\text{LQ}}^{\text{min}}$. The background expectations are scaled by a scale factor extracted from the fit. However, the uncertainties shown are the pre-fit ones. The data event yield uncertainty is statistical (gaussian). The background uncertainty consists of all the experimental and theoretical components summed in quadrature. The uncertainty of the fit-extracted background scale factor is also added in quadrature.
Search for the second generation leptoquarks (LQs). Event yields in the Z control region (CR), ttbar CR and in the signal region (SR). Each CR is treated as one bin in the profile likelihood fit. The SR is split to 7 bins according to $m_{\text{LQ}}^{\text{min}}$ for the fit. The table below shows the total number of events in each CR. For the SR, it shows the number of events per 100 GeV as a function of $m_{\text{LQ}}^{\text{min}}$. The background expectations are scaled by a scale factor extracted from the fit. However, the uncertainties shown are the pre-fit ones. The data event yield uncertainty is statistical (gaussian). The background uncertainty consists of all the experimental and theoretical components summed in quadrature. The uncertainty of the fit-extracted background scale factor is also added in quadrature.
NLO cross sections and selection efficiencies (assuming $\beta$ = 1) for different signal points.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But sometimes you may wish to be more specific. Here we show you how.
Guidance on the query string syntax can also be found in the OpenSearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.