The $m_{e\mu}$ distribution of the observed data is shown, with the $S+B$ fit at $m_{X}=146\mathrm{GeV}$ in red solid line, and the background component of the fit in red dotted line. Events and fit in each category are weighted by $S/(S+B)$. The one and two standard deviation uncertainty bands of the background component are shown in green and yellow. The lower panel shows the residuals after subtracting the background component of the fit from data.

Observed (expected) 95% confidence level upper limits on $\sigma(p p \to X(146) \to e \mu)$ for each individual analysis category (as shown in the left axis label) and for the combination of all analysis categories assuming the relative SM-like production cross sections of the ggH and VBF production modes.

The $m_{e\mu}$ distribution of the observed data in the category ggH cat 0 is shown, with the $S+B$ fit at $m_{X}=146\mathrm{GeV}$ in solid red line, and the background component of the fit in dotted red line. The green and yellow bands represent the one and two standard deviations of the background component. The lower panel shows the residuals after subtracting the background component of the fit from data.

The $m_{e\mu}$ distribution of the observed data in the category ggH cat 1 is shown, with the $S+B$ fit at $m_{X}=146\mathrm{GeV}$ in solid red line, and the background component of the fit in dotted red line. The green and yellow bands represent the one and two standard deviations of the background component. The lower panel shows the residuals after subtracting the background component of the fit from data.

The $m_{e\mu}$ distribution of the observed data in the category ggH cat 2 is shown, with the $S+B$ fit at $m_{X}=146\mathrm{GeV}$ in solid red line, and the background component of the fit in dotted red line. The green and yellow bands represent the one and two standard deviations of the background component. The lower panel shows the residuals after subtracting the background component of the fit from data.

The $m_{e\mu}$ distribution of the observed data in the category ggH cat 3 is shown, with the $S+B$ fit at $m_{X}=146\mathrm{GeV}$ in solid red line, and the background component of the fit in dotted red line. The green and yellow bands represent the one and two standard deviations of the background component. The lower panel shows the residuals after subtracting the background component of the fit from data.

The $m_{e\mu}$ distribution of the observed data in the category VBF cat 0 is shown, with the $S+B$ fit at $m_{X}=146\mathrm{GeV}$ in solid red line, and the background component of the fit in dotted red line. The green and yellow bands represent the one and two standard deviations of the background component. The lower panel shows the residuals after subtracting the background component of the fit from data.

The $m_{e\mu}$ distribution of the observed data in the category VBF cat 1 is shown, with the $S+B$ fit at $m_{X}=146\mathrm{GeV}$ in solid red line, and the background component of the fit in dotted red line. The green and yellow bands represent the one and two standard deviations of the background component. The lower panel shows the residuals after subtracting the background component of the fit from data.

Best fit of $\sigma(p p \to X(146) \to e \mu)$ for each analysis category (black point) compared to the best fit for the combination of all analysis categories (blue line). The one standard deviation uncertainty of the per-category best fit is shown in red line and the one standard deviation uncertainty of the combined best fit is shown in green band.

The observed and expected 95% CL upper limits on $\sigma_{ggH,f_{VBF}}(p p \to X \to e \mu)$ and $\sigma_{VBF,f_{VBF}}(p p \to X \to e \mu)$ with $f_{VBF}$ = 0.0.

The observed and expected 95% CL upper limits on $\sigma_{ggH,f_{VBF}}(p p \to X \to e \mu)$ and $\sigma_{VBF,f_{VBF}}(p p \to X \to e \mu)$ with $f_{VBF}$ = 0.1.

The observed and expected 95% CL upper limits on $\sigma_{ggH,f_{VBF}}(p p \to X \to e \mu)$ and $\sigma_{VBF,f_{VBF}}(p p \to X \to e \mu)$ with $f_{VBF}$ = 0.2.

The observed and expected 95% CL upper limits on $\sigma_{ggH,f_{VBF}}(p p \to X \to e \mu)$ and $\sigma_{VBF,f_{VBF}}(p p \to X \to e \mu)$ with $f_{VBF}$ = 0.3.

The observed and expected 95% CL upper limits on $\sigma_{ggH,f_{VBF}}(p p \to X \to e \mu)$ and $\sigma_{VBF,f_{VBF}}(p p \to X \to e \mu)$ with $f_{VBF}$ = 0.4.

The observed and expected 95% CL upper limits on $\sigma_{ggH,f_{VBF}}(p p \to X \to e \mu)$ and $\sigma_{VBF,f_{VBF}}(p p \to X \to e \mu)$ with $f_{VBF}$ = 0.5.

The observed and expected 95% CL upper limits on $\sigma_{ggH,f_{VBF}}(p p \to X \to e \mu)$ and $\sigma_{VBF,f_{VBF}}(p p \to X \to e \mu)$ with $f_{VBF}$ = 0.6.

The observed and expected 95% CL upper limits on $\sigma_{ggH,f_{VBF}}(p p \to X \to e \mu)$ and $\sigma_{VBF,f_{VBF}}(p p \to X \to e \mu)$ with $f_{VBF}$ = 0.7.

The observed and expected 95% CL upper limits on $\sigma_{ggH,f_{VBF}}(p p \to X \to e \mu)$ and $\sigma_{VBF,f_{VBF}}(p p \to X \to e \mu)$ with $f_{VBF}$ = 0.8.

The observed and expected 95% CL upper limits on $\sigma_{ggH,f_{VBF}}(p p \to X \to e \mu)$ and $\sigma_{VBF,f_{VBF}}(p p \to X \to e \mu)$ with $f_{VBF}$ = 0.9.

The observed and expected 95% CL upper limits on $\sigma_{ggH,f_{VBF}}(p p \to X \to e \mu)$ and $\sigma_{VBF,f_{VBF}}(p p \to X \to e \mu)$ with $f_{VBF}$ = 1.0.

Observed and expected 95% CL upper limits on ${{(\sigma_{\text{H}}/\sigma_{\text{H}}^{\mathrm{SM}}) \times {{\mathcal{B}(\text{H} \to \text{inv})}}}}$ for the combined VBF, ttH, VH and ggH channels using all available CMS data for 2016--2018, Run1, 2015, and their combination, assuming a SM Higgs boson with a mass of 125 GeV.

Observed and expected 95% CL upper limits on ${{(\sigma_{\text{H}}/\sigma_{\text{H}}^{\mathrm{SM}}) \times {{\mathcal{B}(\text{H} \to \text{inv})}}}}$ for the VBF, ttH(lep), ttH(had), V(qq)H, Z(ll)H, Z(bb)H and ggH channels using all available CMS data, and their combination, assuming a SM Higgs boson with a mass of 125 GeV.

The 90% CL upper limits on the spin-independent DM-nucleon scattering cross section in Higgs-portal models, assuming a scalar, fermionic or vectorial DM candidate (with a UV-complete vector model), compared to direct detection experimets CRESST-III, DarkSide-50, LUX_ZEPLIN and PandaX-4T (2022 results).

Postfit event yields in each category and hadronic recoil bin of the ttH category SR for the different background and signal processes summed across 2016, 2017 and 2018 samples. The background and signal yields and the corresponding uncertainties are obtained after performing a combined fit across all of the CRs and SR or CR-only. The Postfit signal contributions for a Higgs boson, produced in ttH, VH (split into WH and ZH), ggH and VBF, decaying to invisible particles with a branching fraction of $\mathcal{B}(\text{H} \to \text{inv}) = 1$, and the observed event yields are reported.

Postfit event yields in each category and hadronic recoil bin of the VH category SR for the different background and signal processes summed across 2016, 2017 and 2018 samples. The background and signal yields and the corresponding uncertainties are obtained after performing a combined fit across all of the CRs and SR or CR-only. The Postfit signal contributions for a Higgs boson, produced in ttH, VH (split into WH and ZH), ggH and VBF, decaying to invisible particles with a branching fraction of $\mathcal{B}(\text{H} \to \text{inv}) = 1$, and the observed event yields are reported.

Postfit event yields in each category and $p\mathrm{_{T}^{miss}}$ bin of the ttH category e$+$jets CR for the different background processes summed across 2016, 2017 and 2018 samples. The background yields and the corresponding uncertainties are obtained after performing a combined fit across all of the CRs and SR or CR-only.

Postfit event yields in each category and $p\mathrm{_{T}^{miss}}$ bin of the VH category e$+$jets CR for the different background processes summed across 2016, 2017 and 2018 samples. The background yields and the corresponding uncertainties are obtained after performing a combined fit across all of the CRs and SR or CR-only.

Postfit event yields in each category and $p\mathrm{_{T}^{miss}}$ bin of the ttH category $\mu+$jets CR for the different background processes summed across 2016, 2017 and 2018 samples. The background yields and the corresponding uncertainties are obtained after performing a combined fit across all of the CRs and SR or CR-only.

Postfit event yields in each category and $p\mathrm{_{T}^{miss}}$ bin of the VH category $\mu+$jets CR for the different background processes summed across 2016, 2017 and 2018 samples. The background yields and the corresponding uncertainties are obtained after performing a combined fit across all of the CRs and SR or CR-only.

Postfit event yields in each category and $p\mathrm{_{T}^{miss}}$ bin of the ttH category ee$+$jets, $\mu\mu+$jets, and $\ell\ell+$jets CRs for the different background processes summed across 2016, 2017 and 2018 samples. The background yields and the corresponding uncertainties are obtained after performing a combined fit across all of the CRs and SR or CR-only.

Postfit event yields in each category and $p\mathrm{_{T}^{miss}}$ bin of the VH category ee$+$jets, $\mu\mu+$jets, and $\gamma+$jets CRs for the different background processes summed across 2016, 2017 and 2018 samples. The background yields and the corresponding uncertainties are obtained after performing a combined fit across all of the CRs and SR or CR-only.

Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the High-pT jet SR for observed data events

Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the High-pT jet SR for expected signal events in the strong gluino pair pair production model with m(gluino)=1.8 TeV, m(chi0)=0.2 TeV, tau(chi0)=0.1 ns

Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the Trackless jet SR for observed data events

Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the Trackless jet SR for expected signal events in the electroweak pair production model

Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Exclusion limits at 95% CL on the production cross section in the electroweak pair production model.

Exclusion limits at 95% CL on the production cross section in the strong gluino pair production models and m(gluino)=2.4 TeV

Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Expected exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Observed exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Expected exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Observed exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Exclusion limits at 95% CL on the production cross section in the strong gluino pair production models and m($ ilde{\chi}^0_1$)=1.25 TeV

Acceptance cutflow for the High-pT SR for representative points in the strong gluino pair production model. See additional resources for more information.

Acceptance cutflow for the Trackless SR for representative points in the electroweak pair production model. See additional resources for more information.

Acceptance cutflow for the Trackless SR for representative points in the electroweak pair production model with heavy-flavor quarks final state. See additional resources for more information.

Acceptance cutflow for the High-pT SR for representative points in the electroweak pair production model with heavy-flavor quarks final state. See additional resources for more information.

Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R < 1150 mm

Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R [1150, 3870] mm

Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R > 3870 mm

Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R < 1150 mm

Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R [1150, 3870] mm

Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R > 3870 mm

Reinterpretation Material: Vertex-level Efficiency for R < 22 mm

Reinterpretation Material: Vertex-level Efficiency for R [22, 25] mm

Reinterpretation Material: Vertex-level Efficiency for R [25, 29] mm

Reinterpretation Material: Vertex-level Efficiency for R [29, 38] mm

Reinterpretation Material: Vertex-level Efficiency for R [38, 46] mm

Reinterpretation Material: Vertex-level Efficiency for R [46, 73] mm

Reinterpretation Material: Vertex-level Efficiency for R [73, 84] mm

Reinterpretation Material: Vertex-level Efficiency for R [84, 111] mm

Reinterpretation Material: Vertex-level Efficiency for R [111, 120] mm

Reinterpretation Material: Vertex-level Efficiency for R [120, 145] mm

Reinterpretation Material: Vertex-level Efficiency for R [145, 180] mm

Reinterpretation Material: Vertex-level Efficiency for R [180, 300] mm

Cutflow (acceptance x efficiency) for the High-pT SR for representative points in the strong gluino pair production model. See additional resources for more information.

Cutflow (acceptance x efficiency) for the Trackless SR for representative points in the electroweak pair production model. See additional resources for more information.

Cutflow (acceptance x efficiency) for the Trackless SR for representative points in the electroweak pair production model with heavy-flavor quarks. See additional resources for more information.

Cutflow (acceptance x efficiency) for the High-pT SR for representative points in the electroweak pair production model with heavy-flavor quarks. See additional resources for more information.

Bayesian upper exclusion limits on the ratio $g_{W'}/g_{W}$ for an SSM-like W$\prime$ boson are shown. The unity coupling ratio (blue dotted curve) corresponds to the SSM common benchmark. The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively.

Bayesian lower exclusion limits on the NUGIM G(221) mixing angle $\cot(\theta_{E})$ are shown as a function of the W$\prime$ boson mass. The theoretically excluded region is shaded in grey. The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively.

Bayesian upper exclusion limits at 95% CL on the product of the production cross section and branching fraction of a QBH in an associated $ au$ lepton and neutrino final state. Minimum threshold masses $m_{th}$ of up to 6.6 TeV are excluded at 95% CL. The observed limit (solid line) is obtained from the intersection with the LO QBH cross section (blue dotted curve). The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively.

Bayesian upper limits at 95% CL on the cross section of the process $pp\rightarrow\tau\nu$ mediated via LQ exchange in the t-channel. The inner (green) band and the outer (yellow) band indicate the regions containing 68 and 95%, respectively, of the distribution of limits expected under the background-only hypothesis. The predicted LQ cross section at LO in the three coupling benchmark scenarios is depicted in different colors for $g_{U}=1$. The uncertainty bandy correspond to the sum in quadrature of PDF and scale variations. The first benchmark scenario considers only couplings to left-handed SM fermions (i.e. $\beta_{\text{R}}^{ij}=0$) and is referred to as "best fit LH". The second benchmark, referred to as "best fit LH+RH", considers $|\beta_{\text{R}}^{\text{b}\tau}|=1$ and all other $\beta_{\text{R}}^{ij}=0$. In the third "democratic" benchmark, equal couplings only to LH fermions are assumed, i.e. $\beta_{\text{L}}^{ij}=1$ and $\beta_{\text{R}}^{ij}=0$ for all $i$ and $j$.

Expected and observed lower limits of the LQ mass as a function of the coupling $g_{U}$ in the LH scenario. The blue band shows the 68% and 95% regions of $g_{U}$ preferred by the fit to the b anomalies data.

Expected and observed lower limits of the LQ mass as a function of the coupling $g_{U}$ in the LH+RH scenario. The blue band shows the 68% and 95% regions of $g_{U}$ preferred by the fit to the b anomalies data.

Expected and observed lower limits of the LQ mass as a function of the coupling $g_{U}$ in the democratic scenario. The blue band shows the 68% and 95% regions of $g_{U}$ preferred by the fit to the b anomalies data.

Bayesian upper exclusion limits at 95% CL on each of the Wilson coefficients described by the EFT model based on 2016-2018 data. The three different coupling types represent a left-handed vector coupling ($\epsilon^{cb}_{L}$), tensor-like coupling ($\epsilon^{cb}_{T}$), and scalar-tensor-like coupling ($\epsilon^{cb}_{S_{L}}$). The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively.

Summary of exclusion limits (expected and observed) calculated at 95% CL for full Run-2 CMS data.

Background prediction and observed data yields in the signal region bins. The background yields are obtained from the background-only fit and serve as input to the simplified likelihood reinterpretation scheme. The naming of the bins is "year_binnumber", following the binning from Figure 4.

Matrix of covariance coefficients between signal region bins. The coefficients are obtained from the background-only fit and serve as input to the simplified likelihood reinterpretation scheme. The naming of the bins is "year_binnumber", following the binning used in Figure 4.

Predicted signal yields for the 2017 data-taking period, corresponding to 41.3 fb$^{-1}$, after the application of each search requirement (cumulative) for various signal hypothesis. The requirements listed are presented as total efficiencies w.r.t. the previous selection step.

Feynman diagrams of the effective neutralino pair production in the GMSB simplified model in which the two neutralinos decay into two gravitinos ($\tilde{G}$) and two $Z$ bosons (left), a $Z$ and a Higgs boson ($H$) (center), or two Higgs bosons (right).

The distributions of the most impactful input variables to the TD jet tagger for signal (red, lighter) and collision background (blue, darker). They include the charged (upper left) and neutral (upper right) hadron energy fractions, the number of track constituents in the jet (middle left), the $\Delta R$ between the jet axis and the closest track associated with the PV (middle right), and the jet time (lower).

The distributions of the most impactful input variables to the TD jet tagger for signal (red, lighter) and collision background (blue, darker). They include the charged (upper left) and neutral (upper right) hadron energy fractions, the number of track constituents in the jet (middle left), the $\Delta R$ between the jet axis and the closest track associated with the PV (middle right), and the jet time (lower).

The distributions of the most impactful input variables to the TD jet tagger for signal (red, lighter) and collision background (blue, darker). They include the charged (upper left) and neutral (upper right) hadron energy fractions, the number of track constituents in the jet (middle left), the $\Delta R$ between the jet axis and the closest track associated with the PV (middle right), and the jet time (lower).

The distributions of the most impactful input variables to the TD jet tagger for signal (red, lighter) and collision background (blue, darker). They include the charged (upper left) and neutral (upper right) hadron energy fractions, the number of track constituents in the jet (middle left), the $\Delta R$ between the jet axis and the closest track associated with the PV (middle right), and the jet time (lower).

The distributions of the most impactful input variables to the TD jet tagger for signal (red, lighter) and collision background (blue, darker). They include the charged (upper left) and neutral (upper right) hadron energy fractions, the number of track constituents in the jet (middle left), the $\Delta R$ between the jet axis and the closest track associated with the PV (middle right), and the jet time (lower).

TD jet tagger score distributions (left) for signal (red, lighter) and collision background (blue, darker). Identification probability for the signal versus the misidentification probability for the background (right) with the tagger working point (w.~p.) used in the analysis shown as a blue marker. Both are evaluated using an independent sample of testing events.

TD jet tagger score distributions (left) for signal (red, lighter) and collision background (blue, darker). Identification probability for the signal versus the misidentification probability for the background (right) with the tagger working point (w.~p.) used in the analysis shown as a blue marker. Both are evaluated using an independent sample of testing events.

The efficiency of the TD jet tagger working point used in the analysis is shown as a function of the lab frame transverse decay length for simulated signals with $\chi$ mass of 400 GeV. The uncertainties shown account for lifetime dependence and statistical uncertainty.

The TD jet tagger score distributions for simulation (shaded histogram) and data (black markers) when using electrons from $W\to e\nu_e$ events as proxy objects for signal jets. The histograms and data points have been normalized to unit area. The last bin contains jets with tagger scores greater than 0.996, the threshold used to tag signal jets. Similar levels of agreement are observed for photon proxy objects from the $Z\to\ell^+\ell^-\gamma$ sample.

The TD jet tagger misidentification probability measured using the nominal $W$+jets MR (black round markers) is shown along with the systematic uncertainty (gray band), quantifying the degree of process dependence measured from alternative MRs. The measurements in the alternative MRs are displayed as well ($Z$+jets MR as green round markers, $t\bar{t}$ MR as red squared markers, QCD MR as blue triangular markers) along with their respective statistical uncertainty. On the left, this probability is shown for the first 19.9 fb$^{-1}$ of data collected in 2016, while on the right it is shown for the last 16.4 fb$^{-1}$ of data collected in 2016combined with data collected in 2017-2018.

The TD jet tagger misidentification probability measured using the nominal $W$+jets MR (black round markers) is shown along with the systematic uncertainty (gray band), quantifying the degree of process dependence measured from alternative MRs. The measurements in the alternative MRs are displayed as well ($Z$+jets MR as green round markers, $t\bar{t}$ MR as red squared markers, QCD MR as blue triangular markers) along with their respective statistical uncertainty. On the left, this probability is shown for the first 19.9 fb$^{-1}$ of data collected in 2016, while on the right it is shown for the last 16.4 fb$^{-1}$ of data collected in 2016combined with data collected in 2017-2018.

Distribution of the number of TD tagged jets for the $m_{\chi} = 400$ GeVsimulated signal samples with $c\tau_{\chi} = 0.5$ m (solid red line) and $c\tau_{\chi} = 3.0$ m (dotted green line), estimated background (blue square markers), and data (black round markers). The signal distributions are normalized to the expected cross section limit. The blue shaded region indicates the systematic uncertainty in the background prediction. No background prediction is shown for the bin with zero TD tagged jets as it is the main control region used to predict the background for the other two bins. There are zero observed events in the bin with two or more TD tagged jets.

Expected and observed 95% CL upper limits on $\sigma_{\chi\chi}$ as functions of $m_\chi$ in a scenario with $\mathcal{B}(\chi\to HG) = 0.5$ and $c\tau = 0.5$ m (left) or 3 m (right).

Expected and observed 95% CL upper limits on $\sigma_{\chi\chi}$ as functions of $m_\chi$ in a scenario with $\mathcal{B}(\chi\to HG) = 0.5$ and $c\tau = 0.5$ m (left) or 3 m (right).

Expected and observed 95% CL upper limits on $\sigma_{\chi\chi}$ as functions of $c\tau_{\chi}$ in a scenario with $\mathcal{B}(\chi\to H\tilde{G}) = 0.5$ and $m_{\chi} = 400$ GeV (left) or 1000 GeV (right).

Expected and observed 95% CL upper limits on $\sigma_{\chi\chi}$ as functions of $c\tau_{\chi}$ in a scenario with $\mathcal{B}(\chi\to H\tilde{G}) = 0.5$ and $m_{\chi} = 400$ GeV (left) or 1000 GeV (right).

The observed 95% CL upper limit on $\sigma_{\chi\chi}$ as a function of $m_{\chi}$ and $c\tau_{\chi}$ in a scenario with $\mathcal{B}(\chi\to H\tilde{G}) = 0.5$. The area enclosed by the dotted black line corresponds to the observed excluded region.

The distribution of the jet charged hadron energy fraction, a variable used as input to the TD jet tagger score, for simulation (shaded histogram) and data (black markers) when using electrons from $W\to e\nu_e$ events as proxy objects for signal jets. The histograms and data points have been normalized to unit area. Similar levels of agreement are observed for photon proxy objects from the $Z\to\ell^+\ell^-\gamma$ sample.

The distribution of the jet neutral hadron energy fraction, a variable used as input to the TD jet tagger score, for simulation (shaded histogram) and data (black markers) when using electrons from $W\to e\nu_e$ events as proxy objects for signal jets. The histograms and data points have been normalized to unit area. Similar levels of agreement are observed for photon proxy objects from the $Z\to\ell^+\ell^-\gamma$ sample.

The distribution of the number of track constituents in the jet, a variable used as input to the TD jet tagger score, for simulation (shaded histogram) and data (black markers) when using electrons from $W\to e\nu_e$ events as proxy objects for signal jets. The histograms and data points have been normalized to unit area. Similar levels of agreement are observed for photon proxy objects from the $Z\to\ell^+\ell^-\gamma$ sample.

The $\eta$ distribution of TD-tagged jets in a background-enriched control region that comprises events with exactly one TD-tagged jet. Observed data (black round markers) and the corresponding prediction based on control samples in data (empty squared markers), measured using the nominal $W$+jets MR, are compared. The prediction uncertainty (gray band) includes the systematic uncertainty quantifying the degree of process dependence measured from alternative MRs. The predictions for the shape and the normalization of the $\eta$ distribution are consistent with the data.

Jet time distribution in a sample of b-tagged jets from dilepton $t \bar{t}$ events in 2017 data-taking period (black round markers) and simulation (filled histogram). A Gaussian smearing procedure is applied to the jet time in the $t \bar{t}$ sample (green line) to correct for effects that are difficult to simulate (timing drift caused by crystals transparency loss due to detector aging, electronics jitter).

The observed 95% CL upper limit on $\sigma_{\chi\chi}$ as a function of $m_{\chi}$ and $c\tau_{\chi}$ in a scenario with $\mathcal{B}(\chi\to H\tilde{G}) = 1$. The area enclosed by the dotted black line corresponds to the observed excluded region.

The observed 95% CL upper limit on $\sigma_{\chi\chi}$ as a function of $m_{\chi}$ and $c\tau_{\chi}$ in a scenario with $\mathcal{B}(\chi\to H\tilde{G}) = 0.75$, $\mathcal{B}(\chi\to Z\tilde{G}) = 0.25$. The area enclosed by the dotted black line corresponds to the observed excluded region.

The observed 95% CL upper limit on $\sigma_{\chi\chi}$ as a function of $m_{\chi}$ and $c\tau_{\chi}$ in a scenario with $\mathcal{B}(\chi\to H\tilde{G}) = 0.25$, $\mathcal{B}(\chi\to Z\tilde{G}) = 0.75$. The area enclosed by the dotted black line corresponds to the observed excluded region.

The observed 95% CL upper limit on $\sigma_{\chi\chi}$ as a function of $m_{\chi}$ and $c\tau_{\chi}$ in a scenario with $\mathcal{B}(\chi\to Z\tilde{G}) = 1$. The area enclosed by the dotted black line corresponds to the observed excluded region.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 127 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 127 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 127 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 150 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 150 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 150 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 175 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 175 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 175 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 200 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 200 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 200 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 250 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 250 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 250 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 300 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 300 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 300 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 400 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 400 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 400 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 600 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 600 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 600 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 800 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 800 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 800 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 1000 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 1000 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 1000 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 1250 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 1250 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 1250 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 1500 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 1500 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 1500 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 1800 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the merged topology, namely, the H (or Z) decay products are produced with an angular separation $\Delta R < 0.8$, and the H (or Z) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 3\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 1800 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with exactly one quark in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and only one b-quark (or light quark) has $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 5\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

The efficiency of identifying a LLP decay as a TD-tagged jet in bins of the LLP transverse and longitudinal decay position. The sample used to compute the efficiency contains events with pair production of $\chi$ with a mass of 1800 GeV and a lifetime of 0.5 and 3 m, and considering the combinations of the $\chi$ decay modes considered in this search ($H \tilde{G} \rightarrow b\bar{b} \tilde{G}$ or $Z\tilde{G} \rightarrow q\bar{q} \tilde{G}$). The efficiency is calculated on top of the acceptance definition for the resolved topology with two quarks in acceptance, namely, the H (or Z) decay products are produced with an angular separation $\Delta R \geq 0.8$, and both b-quarks (or light quarks) have $p_T > 30$ GeV and $|\eta|<1$. The full simulation signal yield prediction can be reproduced within 7\%. This nonclosure uncertainty is added in quadrature to the statistical uncertainty of each bin.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 127 GeV.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 127 GeV.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 150 GeV.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 150 GeV.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 175 GeV.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 175 GeV.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 200 GeV.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 200 GeV.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 250 GeV.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 250 GeV.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 300 GeV.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 300 GeV.

Cutflow table for a $\tilde{\chi}_{1}^{0}$ signal sample with a mass of 400 GeV.

Expected and observed upper limits on the AQGC operators $a^Z_C/\Lambda^2$, with no unitarization. The $y$ axis shows the limit on the ratio of the observed cross section to the cross section predicted for each anomalous coupling value ($\sigma_\mathrm{AQGC}$).

Limits on LEP-like dimension-6 anomalous quartic gauge coupling parameters, with and without unitarization via a clipping procedure.

Conversion of limits on $a^W_0$ to dimension-8 $f_{M,i}$ operators, using the assumption of vanishing $WWZ\gamma$ couplings to eliminate some parameters. When quoting limits on one of the operators, the other is fixed to zero. The results for $|f_{M,0}/\Lambda^{4}|$ and $|f_{M,4}/\Lambda^{4}|$ are shown with and without clipping of the signal model at 1.4 TeV, when the other parameter is fixed to the SM value of zero.

Conversion of limits on $a^W_0$ and $a^W_C$ to dimension-8 $f_{M,i}$ operators, using the assumption that all $f_{M,i}$ except one are equal to zero. The results are shown with and without clipping of the signal model at 1.4 TeV.

{Expected and observed limits in the two-dimensional plane of $a^W_0/\Lambda^2$ vs. $a^W_C/\Lambda^2$. The limits are described by analytical ellipses of equation $(x-x0)^2/a^2 + (y-y0)^2/b^2 = 1$ and rotated counter-clockwise by $\theta$ degrees, where $x$ and $y$ in the equation correspond to the $a_0^W$ and $a_C^W$ couplings, respectively.

{Expected and observed limits in the two-dimensional plane of $a^W_0/\Lambda^2$ vs. $a^W_C/\Lambda^2$ with unitarization imposed by clipping the signal model at 1.4 TeV. The limits are described by analytical ellipses of equation $(x-x0)^2/a^2 + (y-y0)^2/b^2 = 1$ and rotated counter-clockwise by $\theta$ degrees, where $x$ and $y$ in the equation correspond to the $a_0^W$ and $a_C^W$ couplings, respectively.

{Expected and observed limits in the two-dimensional plane of $a^Z_0/\Lambda^2$ vs. $a^Z_C/\Lambda^2$. The limits are described by analytical ellipses of equation $(x-x0)^2/a^2 + (y-y0)^2/b^2 = 1$ and rotated counter-clockwise by $\theta$ degrees, where $x$ and $y$ in the equation correspond to the $a_0^Z$ and $a_C^Z$ couplings, respectively.

Parametrization of the $A_{X}$ factor, defined as the fraction of diphoton resonances satisfying the fiducial acceptance at the particle level, as function of $m_{X}$ obtained from the narrow width simulated signal samples produced in gluon fusion.

The correction factor, $C_{X}$, defined as the ratio between the number of reconstructed signal events passing the analysis cuts and the number of signal events at the particle level generated within the fiducial volume, and acceptance correction factor, $A_{X}$, defined as the fraction of diphoton resonances satisfying the fiducial acceptance at the particle level. Both are computed for NWA spin-0 models as a function of $m_{X}$.

Effect of event selections on a scalar MC signal sample generated for $m_{X}$ = 15 GeV and on the data. For the MC sample, the efficiencies are shown after applying event weights and a truth level filter that requires two photons with $p^{\gamma\gamma}_{T}>40$ GeV; for the data, the absolute yields are shown. The initial yields for data include a trigger preselection that is the OR of a list of single photon and diphoton triggers. The "2 $loose$ photons" step includes the kinematic acceptance cuts.

Parameterization of the Double Sided Crystal Ball function parameters describing the scalar mass resolution model as a function of $m_{X}$ [GeV].

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

Cutflow table for the slepton signal sample with $m(\tilde{\ell},\tilde{\chi}_1^0) = (100,70)$ GeV, in the SR-0J $m_{\mathrm{T2}}^{100} \in [100,\infty)$ region. The yields include the process cross section and are weighted to the 139 fb$^{-1}$ luminosity. 246000 events were generated for the sample.

Cutflow table for the slepton signal sample with $m(\tilde{\ell},\tilde{\chi}_1^0) = (100,70)$ GeV, in the SR-1J $m_{\mathrm{T2}}^{100} \in [100,\infty)$ region. The yields include the process cross section and are weighted to the 139 fb$^{-1}$ luminosity. 246000 events were generated for the sample.

Observed and expected exclusion limits on SUSY simplified models, with observed upper limits on signal cross-section (fb) overlaid, for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.

The upper panel shows the observed number of events in each of the binned SRs defined in Table 3, together with the expected SM backgrounds obtained after applying the efficiency correction method to compute the number of expected FSB events. `Others' include the non-dominant background sources, e.g. $t \bar{t}$+$V$, Higgs boson and Drell--Yan events. The uncertainty band includes systematic and statistical errors from all sources. The distributions of two signal points with mass splittings $\Delta m(\tilde{\ell},\tilde{\chi}_1^0) = m(\tilde{\ell})-m(\tilde{\chi}_1^0) = 30$ GeV and $\Delta m(\tilde{\ell},\tilde{\chi}_1^0) = m(\tilde{\ell})-m(\tilde{\chi}_1^0) = 50$ GeV are overlaid. The lower panel shows the significance as defined in Ref. [115].

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR$^{\text{-DF BDT-signal}\in(0.81,1]}_{\text{-SF BDT-signal}\in(0.77,1]}$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR$^{\text{-DF BDT-signal}\in(0.81,1]}_{\text{-SF BDT-signal}\in(0.77,1]}$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,0.8125]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,0.8125]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8125,0.815]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8125,0.815]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.815,0.8175]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.815,0.8175]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8175,0.82]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8175,0.82]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,0.8225]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,0.8225]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8225,0.825]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8225,0.825]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.825,0.8275]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.825,0.8275]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8275,0.83]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8275,0.83]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,0.8325]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,0.8325]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8325,0.835]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8325,0.835]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.835,0.8375]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.835,0.8375]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8375,0.84]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8375,0.84]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,0.845]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,0.845]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.845,0.85]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.845,0.85]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,0.86]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,0.86]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.86,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.86,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,0.775]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,0.775]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.775,0.78]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.775,0.78]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,0.785]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,0.785]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.785,0.79]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.785,0.79]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,0.795]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,0.795]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.795,0.80]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.795,0.80]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,0.81]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,0.81]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

Cutflow table for the chargino signal sample with $m\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0=(125,25)$ GeV, in the SR-SF BDT-signal$\in (0.77,1]$ and SR-DF BDT-signal$\in (0.81,1]$ regions. The yields include the process cross-section and are weighted to the 139 fb$^{-1}$ luminosity. 170000 events were generated for the sample.

Observed and expected exclusion limits on SUSY simplified models, with observed upper limits on signal cross-section (fb) overlaid, for chargino-pair production with $W$-boson-mediated decays in the $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ plane. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

The upper panel shows the observed number of events in the SRs defined in Table 3, together with the expected SM backgrounds obtained after the background fit in the CRs. `Others' include the non-dominant background sources, e.g.$t \bar{t}$+$V$, Higgs boson and Drell--Yan events. The uncertainty band includes systematic and statistical errors from all sources. Distributions for three benchmark signal points are overlaid for comparison. The lower panel shows the significance as defined in Ref. [115].

Cumulative efficiency for simulated signal events to pass each stage of the event selection in the hadhad category. The efficiencies are calculated with respect to HH to bbtautau decays in which both tau-leptons decay hadronically. The ‘Pre-selection’ consists of basic requirements, including that at least two tau-had-vis pass loose kinematic requirements, at least one of the tau-had-vis candidate passes identification requirement, and that events do not contain an electron or muon. The ‘Object selections’ require exactly two tau-had-vis candidates, and at least two jets with pT > 25 GeV and abs(eta) < 2.5. The ‘Loose tau ID’ requires that both tau-had-vis candidates pass identification requirements. The ‘DTT offline jet cuts’ are cuts placed on the pT of the reconstructed jet or tau-had-vis that are geometrically matched to the HLT objects, to ensure the efficiencies of the HLT objects reach the plateau region.

Cumulative efficiency for simulated signal events to pass each stage of the event selection in the lephad SLT category. The efficiencies are calculated with respect to HH to bbtautau decays in which one tau-lepton decays hadronically and one decays leptonically. The ‘Pre-selection’ consists of basic requirements, including that at least one tau-had-vis candidate and one lepton pass loose kinematic requirements. The ‘Object selections’ require exactly one tau-had-vis candidate, and at least two jets with pT > 25 GeV and abs(eta) < 2.5. The ‘Trigger specific offline pT cuts’ are cuts placed on the pT of the reconstructed jet or tau-had-vis that are geometrically matched to the HLT objects, to ensure the efficiencies of the HLT objects reach the plateau region.

Cumulative efficiency for simulated signal events to pass each stage of the event selection in the lephad LTT category. The efficiencies are calculated with respect to HH to bbtautau decays in which one tau-lepton decays hadronically and one decays leptonically. The ‘Pre-selection’ consists of basic requirements, including that at least one tau-had-vis candidate and one lepton pass loose kinematic requirements. The ‘Object selections’ require exactly one tau-had-vis candidate, and at least two jets with pT > 25 GeV and abs(eta) < 2.5. The ‘Trigger specific offline pT cuts’ are cuts placed on the pT of the reconstructed jet or tau-had-vis that are geometrically matched to the HLT objects, to ensure the efficiencies of the HLT objects reach the plateau region.

Post-fit expected number of signal and background events and observed number of data events after applying the selection criteria and requiring exactly 2 b-tagged jets and assuming a background-only hypothesis.

Observed and expected limits at 95% CL on the cross-section of HH production, for the non-resonant ggF+VBF HH search, and the resonant HH search for four values of the resonance mass mX.

Acceptance times efficiency for the full analysis selections as a function of the resonance mass mX in the hadhad, lephad SLT and lephad LTT trigger categories, and the combined lephad. The acceptance times efficiency is evaluated for HH to bbtautau decays, with respect to the targeted tau-lepton decay modes (lephad or hadhad).

Post-fit distribution of mHH in the hadhad channel.

Post-fit distribution of mHH in the lephad SLT channel.

Post-fit distribution of mHH in the lephad LTT channel.

Post-fit distribution of mtautau MMC in the hadhad channel.

Post-fit distribution of mtautau MMC in the hadhad channel.

Post-fit distribution of mtautau MMC in the hadhad channel.

Post-fit distribution of of di-b-jet mass in the hadhad channel.

Post-fit distribution of di-b-jet mass in the LTT lephad channel.

Post-fit distribution of di-b-jet mass in the LTT lephad channel.

BDT for SM HH in the hadhad channel

NN for SM HH in the lephad SLT channel

NN for SM HH in the lephad LTT channel

PNN for mX = 500 GeV resonant HH in the hadhad channel

PNN for mX = 500 GeV resonant HH in the lephad SLT channel

PNN for mX = 500 GeV resonant HH in the lephad LTT channel

PNN for mX = 1000 GeV resonant HH in the hadhad channel

PNN for mX = 1000 GeV resonant HH in the lephad SLT channel

PNN for mX = 1000 GeV resonant HH in the lephad LTT channel

Event yields as a function of log10(S/B) for data, background and non-resonant HH signal. Final discriminant bins from the hadhad, lephad SLT and lephad LTT categories are combined into bins of log10(S/B). The B is the fitted background yield assuming background-only hypothesis, and the signal S is scaled to the SM expected cross-section.

Observed and expected limits at 95% CL on the cross-section of the resonant HH production as a function of the scalar resonance mass mX.

Post-fit distribution of delta-R between the taus in the hadhad channel.

Post-fit distribution of delta-R between the b-tagged jets in the hadhad channel.

Post-fit distribution of delta-R between the taus in the lephad SLT channel.

Post-fit distribution of delta-R between the b-tagged jets in the lephad SLT channel.

Post-fit distribution of delta-pT between the tau and lepton in the lephad SLT channel.

Post-fit distribution of pT of the subleading b-tagged jet in the lephad SLT channel.

Post-fit distribution of MTW in the lephad SLT channel.

Post-fit distribution of missing transverse momentum in the lephad SLT channel.

Post-fit distribution of missing transverse momentum centrality in the lephad SLT channel.

Post-fit distribution of delta-phi between the Higgs boson candidates in the lephad SLT channel.

Post-fit distribution of delta-pT between the tau and lepton in the lephad LTT channel.

Post-fit distribution of delta-R between the taus in the lephad LTT channel.

Post-fit distribution of delta-phi between the lepton and the missing transverse momentum in the lephad LTT channel.

Post-fit distribution of delta-phi between the Higgs boson candidates in the lephad LTT channel.

Post-fit distribution of the total transverse momentum s in the lephad LTT channel.

PNN for mX = 300 GeV resonant HH in the hadhad channel

PNN for mX = 300 GeV resonant HH in the lephad SLT channel

PNN for mX = 300 GeV resonant HH in the lephad LTT channel

PNN for mX = 1600 GeV resonant HH in the hadhad channel

PNN for mX = 1600 GeV resonant HH in the lephad SLT channel

PNN for mX = 1600 GeV resonant HH in the lephad LTT channel

Local p-value of the background-only hypothesis as a function of the resonance mass.

Distribution of the MLP W+jets score in the CRs for the $T\overline{T}$ search. The observed data, predicted $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario, and the background are all shown. Statistical and systematic uncertainties in the background prediction before performing the fit to data are also shown.

Distribution of DeepAK8 jet tags in the DeepAK8 CR of the $T\overline{T}$ search. The observed data are shown using black markers, $T\overline{T}$ signals using solid lines, and background using filled histograms. Statistical and systematic uncertainties in the background prediction before performing the fit to data are shown by the hatched region.

Distribution of HT in the W+jets CR of the $T\overline{T}$ search. The observed data are shown using black markers, $T\overline{T}$ signals using solid lines, and background using filled histograms. Statistical and systematic uncertainties in the background prediction before performing the fit to data are shown by the hatched region.

Distribution of HT in the $T\overline{T}$ CR of the $T\overline{T}$ search. The observed data are shown using black markers, $T\overline{T}$ signals using solid lines, and background using filled histograms. Statistical and systematic uncertainties in the background prediction before performing the fit to data are shown by the hatched region.

Numbers of predicted and observed CR events in 2016--2018 data for the $T\overline{T}$ signal hypotheses in the single-lepton channel, after a background-only fit to data. Predicted numbers of signal events before the fit to data are included for comparison, using the singlet branching fraction scenario. Uncertainties include statistical and systematic components, and lepton flavor categories are combined with their uncertainties added in quadrature. Values in the DeepAK8 CR represent the number of large-radius jets rather than number of events.

Numbers of predicted and observed CR events in 2016--2018 data for the $B\overline{B}$ signal hypotheses in the single-lepton channel, after a background-only fit to data. Predicted numbers of signal events before the fit to data are included for comparison, using the singlet branching fraction scenario. Uncertainties include statistical and systematic components, and lepton flavor categories are combined with their uncertainties added in quadrature. Values in the DeepAK8 CR represent the number of large-radius jets rather than number of events.

Numbers of predicted and observed CR events in 2017--2018 data in the same-sign dilepton channel, after a background-only fit to data. Predicted numbers of signal events before the fit to data are included for comparison, using the singlet branching fraction scenario. Uncertainties include statistical and systematic components. Predictions for 2017 and 2018 are combined with their uncertainties added in quadrature.

Distribution of lepton $p_T$ in 2017 in the multilepton channel nonprompt lepton control region for all flavor categories, evaluated with the best-fit nonprompt rates. The uncertainty shown is the quadratic sum of statistical and systematics uncertainties.

Distribution of lepton $p_T$ in 2018 in the multilepton channel nonprompt lepton control region for all flavor categories, evaluated with the best-fit nonprompt rates. The uncertainty shown is the quadratic sum of statistical and systematics uncertainties.

Numbers of predicted and observed CR events in 2017--2018 data in the multilepton channel, after a background-only fit to data. Predicted numbers of signal events before the fit to data are included for comparison, using the singlet branching fraction scenario. Uncertainties include statistical and systematic components. Predictions for 2017 and 2018 are combined with their uncertainties added in quadrature.

Numbers of predicted and observed $T\overline{T}$ SR events in 2016--2018 data in the single-lepton channel, after a background-only fit to data. Predicted numbers of signal events before the fit to data are included for comparison, using the singlet branching fraction scenario. Uncertainties include statistical and systematic components, and lepton flavor categories are combined with their uncertainties added in quadrature.

Distribution of the VLQ score in single-lepton category 1. Observed data is shown using black markers, $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region. Electron and muon categories have been combined with their uncertainties added in quadrature.

Distribution of the VLQ score in single-lepton category 2. Observed data is shown using black markers, $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region. Electron and muon categories have been combined with their uncertainties added in quadrature.

Distribution of the VLQ score in single-lepton category 3. Observed data is shown using black markers, $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region. Electron and muon categories have been combined with their uncertainties added in quadrature.

Distribution of the VLQ score in single-lepton category 4. Observed data is shown using black markers, $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region. Electron and muon categories have been combined with their uncertainties added in quadrature.

Distribution of the VLQ score in single-lepton category 5. Observed data is shown using black markers, $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region. Electron and muon categories have been combined with their uncertainties added in quadrature.

Distribution of the VLQ score in single-lepton category 6. Observed data is shown using black markers, $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region. Electron and muon categories have been combined with their uncertainties added in quadrature.

Distribution of the VLQ score in single-lepton category 7. Observed data is shown using black markers, $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region. Electron and muon categories have been combined with their uncertainties added in quadrature.

Distribution of the VLQ score in single-lepton category 8. Observed data is shown using black markers, $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region. Electron and muon categories have been combined with their uncertainties added in quadrature.

Distribution of the VLQ score in single-lepton category 9. Observed data is shown using black markers, $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region. Electron and muon categories have been combined with their uncertainties added in quadrature.

Distribution of the VLQ score in single-lepton category 10. Observed data is shown using black markers, $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region. Electron and muon categories have been combined with their uncertainties added in quadrature.

Distribution of the VLQ score in single-lepton category 11. Observed data is shown using black markers, $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region. Electron and muon categories have been combined with their uncertainties added in quadrature.

Distribution of the VLQ score in single-lepton category 12. Observed data is shown using black markers, $T\overline{T}$ signal with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region. Electron and muon categories have been combined with their uncertainties added in quadrature.

Distribution of $H_T^{\mathrm{lep}}$ in the same-sign dilepton signal region for $ee$ category. Data from 2017 and 2018 is shown using black markers, $T\overline{T}$ signals with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region.

Distribution of $H_T^{\mathrm{lep}}$ in the same-sign dilepton signal region for $e\mu$ category. Data from 2017 and 2018 is shown using black markers, $T\overline{T}$ signals with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region.

Distribution of $H_T^{\mathrm{lep}}$ in the same-sign dilepton signal region for $\mu\mu$ category. Data from 2017 and 2018 is shown using black markers, $T\overline{T}$ signals with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region.

Distribution of $S_T$ in the multilepton signal region for $eee$ category. Data from 2017 and 2018 is shown using black markers, $T\overline{T}$ signals with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region.

Distribution of $S_T$ in the multilepton signal region for $ee\mu$ category. Data from 2017 and 2018 is shown using black markers, $T\overline{T}$ signals with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region.

Distribution of $S_T$ in the multilepton signal region for $e\mu\mu$ category. Data from 2017 and 2018 is shown using black markers, $T\overline{T}$ signals with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region.

Distribution of $S_T$ in the multilepton signal region for $\mu\mu\mu$ category. Data from 2017 and 2018 is shown using black markers, $T\overline{T}$ signals with mass of 1.2 (1.5) TeV in the singlet scenario using solid (dashed) lines, and post-fit background using filled histograms. Statistical and systematic uncertainties in the background prediction after performing the fit to data are shown by the hatched region.

Numbers of predicted and observed $B\overline{B}$ SR events in 2016--2018 data in the single-lepton channel, after a background-only fit to data. Predicted numbers of signal events before the fit to data are included for comparison, using the singlet branching fraction scenario. Uncertainties include statistical and systematic components, and lepton flavor categories are combined with their uncertainties added in quadrature.

Numbers of predicted and observed SR events in 2017--2018 data in the same-sign dilepton channel, after a background-only fit to data. Predicted numbers of signal events before the fit to data are included for comparison, using the singlet branching fraction scenario. Uncertainties include statistical and systematic components. Predictions for 2017 and 2018 are combined with their uncertainties added in quadrature.

Numbers of predicted and observed SR events in 2017--2018 data in the multilepton channel, after a background-only fit to data. Predicted numbers of signal events before the fit to data are included for comparison, using the singlet branching fraction scenario. Uncertainties include statistical and systematic components. Predictions for 2017 and 2018 are combined with their uncertainties added in quadrature.

Expected and observed lower limits on the VLT quark masses.

Expected and observed lower limits on the VLB quark masses.

Expected 95% CL upper limits on $T\overline{T}$ production cross sections for the singlet combination.

Expected 95% CL upper limits on $T\overline{T}$ production cross sections for the doublet combination.

Expected 95% CL upper limits on $B\overline{B}$ production cross sections for the singlet combination.

Expected 95% CL upper limits on $B\overline{B}$ production cross sections for the doublet combination.

The 95% CL expected lower mass limits on pair-produced T quark masses as functions of their branching ratios to W and H bosons.

The 95% CL observed lower mass limits on pair-produced T quark masses as functions of their branching ratios to W and H bosons.

The 95% CL expected lower mass limits on pair-produced B quark masses as functions of their branching ratios to W and H bosons.

The 95% CL observed lower mass limits on pair-produced B quark masses as functions of their branching ratios to W and H bosons.