Event yields for the different processes estimated with the fit to the $O_\mathrm{NN}$ distribution compared to the numbers of observed events. Only the statistical uncertainties are quoted. The $Z,VV+\mathrm{jets}$ contributions and the multijet background are fixed in the fit; therefore no uncertainty is quoted for these processes.

Detailed list of the contribution from each source of uncertainty to the total uncertainty in the measured values of $\sigma_{\mathrm{fid}}(tq)$ and $\sigma_{\mathrm{fid}}(\bar tq)$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3\%$. Uncertainties contributing less than $0.5\%$ are marked with ‘<0.5’.

Significant contributions to the total relative uncertainty in the measured value of $R_{t}$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3~\%$. Uncertainties contributing less than $0.5~\%$ are not shown.

Slopes $a$ of the mass dependence of the measured cross$-$sections.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the neural network discriminant, $O_{\mathrm{NN}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the second neural network discriminant, $O_{\mathrm{NN2}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Migration matrix for $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $p_{\mathrm{T}}(t)$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(\hat{t\hspace{-0.2mm}})|$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(t)|$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Uncertainties in the normalisations of the different backgrounds for all processes, as derived from the total cross-section measurement.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events(at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-quark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.

Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-antiquark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.

Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the normalised differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the absolute differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$.

Uncertainties for the normalised differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

The unfolded differential rate as a function of $\chi$.

The correlation matrix of the unfolded differential rates. The full error covariance can be obtained by combining the quoted error in the other tables with these values. The ordering of the correlations is {$w$, $\cos\theta_\nu$, $\cos\theta_\ell$, $\chi$}, where each variable has 10 bins.

Differential cross section (multiplied by the dimuon branching fraction) of prompt J/$\psi$ mesons in pPb collisions at backward $y_{\mathrm{CM}}$.

Rapidity dependence of the cross section (multiplied by the dimuon branching fraction) for prompt J/$\psi$ mesons in the $p_{\mathrm{T}}$ intervals 6.5<$p_{\mathrm{T}}$<10 GeV and 10<$p_{\mathrm{T}}$<30 GeV in pp collisions.

Rapidity dependence of the cross section (multiplied by the dimuon branching fraction) for prompt J/$\psi$ mesons in the $p_{\mathrm{T}}$ intervals 6.5<$p_{\mathrm{T}}$<10 GeV and 10<$p_{\mathrm{T}}$<30 GeV in pPb collisions.

Transverse momentum dependence of $R_{\mathrm{pPb}}$ for prompt J/$\psi$ mesons in seven $y_{\mathrm{CM}}$ ranges.

Rapidity dependence of $R_{\mathrm{pPb}}$ for prompt J/$\psi$ mesons in $p_{\mathrm{T}}$ range 6.5<$p_{\mathrm{T}}$<10 GeV.

Rapidity dependence of $R_{\mathrm{pPb}}$ for prompt J/$\psi$ mesons in $p_{\mathrm{T}}$ range 10<$p_{\mathrm{T}}$<30 GeV.

Transverse momentum dependence of $R_{\mathrm{FB}}$ for prompt J/$\psi$ mesons in the 0<$y_{\mathrm{CM}}$<0.9 range.

Transverse momentum dependence of $R_{\mathrm{FB}}$ for prompt J/$\psi$ mesons in the 0.9<$y_{\mathrm{CM}}$<1.5 range.

Transverse momentum dependence of $R_{\mathrm{FB}}$ for prompt J/$\psi$ mesons in the 1.5<$y_{\mathrm{CM}}$<1.93 range.

Dependence of $R_{\mathrm{FB}}$ for prompt J/$\psi$ mesons on the hadronic activity in the event, given by the transverse energy deposited in the CMS detector at large pseudorapidities $E_{\mathrm{T}}^{\mathrm{HF}|\eta|>4}$.

Differential cross section (multiplied by the dimuon branching fraction) of nonprompt J/$\psi$ mesons in pp collisions at forward $y_{\mathrm{CM}}$.

Differential cross section (multiplied by the dimuon branching fraction) of nonprompt J/$\psi$ mesons in pp collisions at backward $y_{\mathrm{CM}}$.

Differential cross section (multiplied by the dimuon branching fraction) of nonprompt J/$\psi$ mesons in pPb collisions at forward $y_{\mathrm{CM}}$.

Differential cross section (multiplied by the dimuon branching fraction) of nonprompt J/$\psi$ mesons in pPb collisions at backward $y_{\mathrm{CM}}$.

Rapidity dependence of the cross section (multiplied by the dimuon branching fraction) for nonprompt J/$\psi$ mesons in the $p_{\mathrm{T}}$ intervals 6.5<$p_{\mathrm{T}}$<10 GeV and 10<$p_{\mathrm{T}}$<30 GeV in pp collisions.

Rapidity dependence of the cross section (multiplied by the dimuon branching fraction) for nonprompt J/$\psi$ mesons in the $p_{\mathrm{T}}$ intervals 6.5<$p_{\mathrm{T}}$<10 GeV and 10<$p_{\mathrm{T}}$<30 GeV in pPb collisions.

Transverse momentum dependence of $R_{\mathrm{pPb}}$ for nonprompt J/$\psi$ mesons in seven $y_{\mathrm{CM}}$ ranges.

Rapidity dependence of $R_{\mathrm{pPb}}$ for nonprompt J/$\psi$ mesons in $p_{\mathrm{T}}$ range 6.5<$p_{\mathrm{T}}$<10 GeV.

Rapidity dependence of $R_{\mathrm{pPb}}$ for nonprompt J/$\psi$ mesons in $p_{\mathrm{T}}$ range 10<$p_{\mathrm{T}}$<30 GeV.

Transverse momentum dependence of $R_{\mathrm{FB}}$ for nonprompt J/$\psi$ mesons in the 0<$y_{\mathrm{CM}}$<0.9 range.

Transverse momentum dependence of $R_{\mathrm{FB}}$ for nonprompt J/$\psi$ mesons in the 0.9<$y_{\mathrm{CM}}$<1.5 range.

Transverse momentum dependence of $R_{\mathrm{FB}}$ for nonprompt J/$\psi$ mesons in the 1.5<$y_{\mathrm{CM}}$<1.93 range.

Dependence of $R_{\mathrm{FB}}$ for nonprompt J/$\psi$ mesons on the hadronic activity in the event, given by the transverse energy deposited in the CMS detector at large pseudorapidities $E_{\mathrm{T}}^{\mathrm{HF}|\eta|>4}$.

Distribution of the transverse momentum ratio between the Z boson and the jet in PbPb collisions. The distribution is normalized by the number of Z events.

The mean value of the X_JZ distribution in pp collisions. The resolutions of the measured jet energy and azimuthal angle are smeared to match those of the PbPb sample.

The mean value of the X_JZ distribution in PbPb collisions.

The average number of jet partners per Z boson in pp collisions. The resolutions of the measured jet energy and azimuthal angle are smeared to match those of the PbPb sample.

The average number of jet partners per Z boson in PbPb collisions.

Distribution of the transverse momentum ratio between the Z boson and the jet in pp collisions. The distribution is normalized by the number of Z events. No resolution smearing is applied to the measured jet energy and azimuthal angle.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.2 jets in peripheral events, mixed events.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.3 jets in central events.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.3 jets in central events, mixed events.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.3 jets in peripheral events.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.3 jets in peripheral events, mixed events.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.4 jets in central events.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.4 jets in central events, mixed events.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.4 jets in peripheral events.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.4 jets in peripheral events, mixed events.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.5 jets in central events.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.5 jets in central events, mixed events.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.5 jets in peripheral events.

Distribution of p_{T,jet}^{reco,ch} for Au + Au collisions at \sqrt{s_{NN}} = 200 GeV for R = 0.5 jets in peripheral events, mixed events.

Recoil jet distributions for peripheral Au+Au STAR events after mixed event subtraction as a function of \Delta\phi for p_{T,jet}^{reco,ch} range of 9-13 GeV/c.

Recoil jet distributions after mixed event subtraction as a function of \Delta\phi for p_{T,jet}^{reco,ch} range of 9-13 GeV/c for p+p PYTHIA detector-level simulations.

Recoil jet distributions for peripheral Au+Au STAR events after mixed event subtraction as a function of \Delta\phi for p_{T,jet}^{reco,ch} range of 13-33 GeV/c.

Recoil jet distributions after mixed event subtraction as a function of \Delta\phi for p_{T,jet}^{reco,ch} range of 13-33 GeV/c for p+p PYTHIA detector-level simulations.

Recoil jet distributions for central Au+Au STAR events after mixed event subtraction as a function of \Delta\phi for p_{T,jet}^{reco,ch} range of 9-13 GeV/c.

Recoil jet distributions after mixed event subtraction as a function of \Delta\phi for p_{T,jet}^{reco,ch} range of 9-13 GeV/c for p+p PYTHIA detector-level simulations embeded into mixed events from central Au + Au STAR data at the track level.

Recoil jet distributions for central Au+Au STAR events after mixed event subtraction as a function of \Delta\phi for p_{T,jet}^{reco,ch} range of 13-33 GeV/c.

Recoil jet distributions after mixed event subtraction as a function of \Delta\phi for p_{T,jet}^{reco,ch} range of 13-33 GeV/c for p+p PYTHIA detector-level simulations embeded into mixed events from central Au + Au STAR data at the track level.

Fully corrected distributions of Y(p_{t,jet}^{ch}) for central AU + Au collisions at \sqrt{s_{NN}} = 200 GeV, for anti-k_T jets with R = 0.2.

Fully corrected distributions of Y(p_{t,jet}^{ch}) for peripheral AU + Au collisions at \sqrt{s_{NN}} = 200 GeV, for anti-k_T jets with R = 0.2.

Ratio of fully corrected distributions of Y(p_{t,jet}^{ch}) of central to peripheral events for AU + Au collisions at \sqrt{s_{NN}} = 200 GeV, for anti-k_T jets with R = 0.2 (i.e. ratio of Table 17 to Table 18 in this HEPData entry).

Fully corrected distributions of Y(p_{t,jet}^{ch}) for central AU + Au collisions at \sqrt{s_{NN}} = 200 GeV, for anti-k_T jets with R = 0.3.

Fully corrected distributions of Y(p_{t,jet}^{ch}) for peripheral AU + Au collisions at \sqrt{s_{NN}} = 200 GeV, for anti-k_T jets with R = 0.3.

Ratio of fully corrected distributions of Y(p_{t,jet}^{ch}) of central to peripheral events for AU + Au collisions at \sqrt{s_{NN}} = 200 GeV, for anti-k_T jets with R = 0.3 (i.e. ratio of Table 20 to Table 21 in this HEPData entry).

Fully corrected distributions of Y(p_{t,jet}^{ch}) for central AU + Au collisions at \sqrt{s_{NN}} = 200 GeV, for anti-k_T jets with R = 0.4.

Fully corrected distributions of Y(p_{t,jet}^{ch}) for peripheral AU + Au collisions at \sqrt{s_{NN}} = 200 GeV, for anti-k_T jets with R = 0.4.

Ratio of fully corrected distributions of Y(p_{t,jet}^{ch}) of central to peripheral events for AU + Au collisions at \sqrt{s_{NN}} = 200 GeV, for anti-k_T jets with R = 0.4 (i.e. ratio of Table 23 to Table 24 in this HEPData entry).

Fully corrected distributions of Y(p_{t,jet}^{ch}) for central AU + Au collisions at \sqrt{s_{NN}} = 200 GeV, for anti-k_T jets with R = 0.5.

Fully corrected distributions of Y(p_{t,jet}^{ch}) for peripheral AU + Au collisions at \sqrt{s_{NN}} = 200 GeV, for anti-k_T jets with R = 0.5.

Ratio of fully corrected distributions of Y(p_{t,jet}^{ch}) of central to peripheral events for AU + Au collisions at \sqrt{s_{NN}} = 200 GeV, for anti-k_T jets with R = 0.4 (i.e. ratio of Table 26 to Table 27 in this HEPData entry).

Ratio of distributions of Y(p_{T,jet}^{ch}) for R = 0.2 to R = 0.5 in peripheral Au + Au collisions at \sqrt{s_{NN}} = 200 GeV.

Ratio of distributions of Y(p_{T,jet}^{ch}) for R = 0.2 to R = 0.5 in central Au + Au collisions at \sqrt{s_{NN}} = 200 GeV.

Azimuthal distribution of recoil jets, \PSI(\DELTA\phi) in central Au + Au collisions at \sqrt{s_{NN}} = 200 GeV measured at STAR.

Azimuthal distribution of R=0.3 recoil jets, \PSI(\DELTA\phi) in peripheral Au + Au collisions at \sqrt{s_{NN}} = 200 GeV measured at STAR.

Azimuthal distribution of recoil jets, \PSI(\DELTA\phi) in PYTHIA generated pp collisiions at sqrt{s_{NN}} = 200 GeV.

Azimuthal distribution of recoil jets, \PSI(\DELTA\phi) in PYTHIA generated pp collisiions embedded in central Au + Au Mixed Events at sqrt{s_{NN}} = 200 GeV.

Rapidity dependence of $B$-meson and prompt-$J/\psi$ meson nuclear modification factors $R_{CuAu}$ along with the initial state effect estimated from EPS09.

Summary of $c\bar{c}$ and $b\bar{b}$ cross sections measured in $d$+Au collisions expressed as nucleon-nucleon equivalent cross section by dividing the $d$+Au cross section by the average number of binary nucleon-nucleon collisions $N_{coll}$ = 7.6 $\pm$ 0.4.

D(pt) distributions for pp and Pb+Pb collisions, jet rapidity 1.2 < |y| < 2.1.

D(z) distributions for pp and Pb+Pb collisions, jet rapidity |y| < 2.1.

D(z) distributions for pp and Pb+Pb collisions, jet rapidity |y| < 0.3.

D(z) distributions for pp and Pb+Pb collisions, jet rapidity 0.3 < |y| < 0.8.

D(z) distributions for pp and Pb+Pb collisions, jet rapidity 1.2 < |y| < 2.1.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with |y| < 0.3, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with 0.3 < |y| < 0.8, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with 1.2 < |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(pt) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(pt) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 100 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 100 < pt < 126 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 126 < pt < 158 GeV.

Ratio of D(z) distributions collisions, centrality 0-10 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 20-30 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 30-40 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

Ratio of D(z) distributions collisions, centrality 60-80 PCT for jets with |y| < 2.1, 158 < pt < 398 GeV.

The difference between the total yield of particles with 1 < pt^trk < 4 GeV measured in 0-80 PCT Pb+Pb collisions and the total yield measured in the same pt interval measured in pp collisions in jets with |y| < 2.1, 100 < pt < 398 GeV.

The difference between the total yield of particles with 4 < pt^trk < 25 GeV measured in 0-80 PCT Pb+Pb collisions and the total yield measured in the same pt interval measured in pp collisions in jets with |y| < 2.1, 100 < pt < 398 GeV.

The difference between the total yield of particles with 25 < pt^trk < 100 GeV measured in 0-80 PCT Pb+Pb collisions and the total yield measured in the same pt interval measured in pp collisions in jets with |y| < 2.1, 100 < pt < 398 GeV.

The difference between the total transverse momentum of particles with 1 < pt^trk < 4 GeV measured in 0-80 PCT Pb+Pb collisions and the total transverse momentum of particles in the same pt interval measured in pp collisions in jets with |y| < 2.1, 100 < pt < 398 GeV.

The difference between the total transverse momentum of particles with 4 < pt^trk < 25 GeV measured in 0-80 PCT Pb+Pb collisions and the total transverse momentum of particles in the same pt interval measured in pp collisions in jets with |y| < 2.1, 100 < pt < 398 GeV.

The difference between the total transverse momentum of particles with 25 < pt^trk < 100 GeV measured in 0-80 PCT Pb+Pb collisions and the total transverse momentum of particles in the same pt interval measured in pp collisions in jets with |y| < 2.1, 100 < pt < 398 GeV.

The ratio of R_D(z) distributions in three rapidity selections for 0-10 PCT Pb+Pb collisions.

The ratio of R_D(z) distributions in three rapidity selections for 10-20 PCT Pb+Pb collisions.

The ratio of R_D(z) distributions in three rapidity selections for 20-30 PCT Pb+Pb collisions.