Event yields for the different processes estimated with the fit to the $O_\mathrm{NN}$ distribution compared to the numbers of observed events. Only the statistical uncertainties are quoted. The $Z,VV+\mathrm{jets}$ contributions and the multijet background are fixed in the fit; therefore no uncertainty is quoted for these processes.

Detailed list of the contribution from each source of uncertainty to the total uncertainty in the measured values of $\sigma_{\mathrm{fid}}(tq)$ and $\sigma_{\mathrm{fid}}(\bar tq)$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3\%$. Uncertainties contributing less than $0.5\%$ are marked with ‘<0.5’.

Significant contributions to the total relative uncertainty in the measured value of $R_{t}$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3~\%$. Uncertainties contributing less than $0.5~\%$ are not shown.

Slopes $a$ of the mass dependence of the measured cross$-$sections.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the neural network discriminant, $O_{\mathrm{NN}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the second neural network discriminant, $O_{\mathrm{NN2}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Migration matrix for $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $p_{\mathrm{T}}(t)$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(\hat{t\hspace{-0.2mm}})|$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(t)|$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Uncertainties in the normalisations of the different backgrounds for all processes, as derived from the total cross-section measurement.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events(at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-quark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.

Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-antiquark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.

Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the normalised differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the absolute differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$.

Uncertainties for the normalised differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Parametrization factors for the $m_{t}$ dependence [see Eq. (4) in the paper] of $\sigma(tq)$, $\sigma(\bar tq)$, and $\sigma(t q+\bar t q)$.

The value of $|V_{tb}|^{2}$ is extracted by dividing the measured value of $\sigma(t q+\bar t q)$ by the prediction of the approximate NNLO calculation. The experimental and theoretical uncertainties are added in quadrature.

Event yields for the 2-jet-$\ell^{+}$ and 2-jet-$\ell^{-}$ HPR channels. The expectation for the signal and background yields correspond to the result of the binned maximum-likelihood fit described in Sec. $\mathrm{VI~D}$ in the paper. The uncertainty of the expectations is the normalization uncertainty of each process after the fit, as described in Sec. $\mathrm{VII~F}$ in the paper.

Migration matrix relating the parton level $p_{\mathrm{T}}(t)$ shown on the $y$ axis and the reconstruction level $p_{\mathrm{T}}(\ell \nu b)$ shown on the $x$ axis for the top-quark $p_{\mathrm{T}}$ distribution.

Migration matrix relating the parton level $p_{\mathrm{T}}(\bar t)$ shown on the $y$ axis and the reconstruction level $p_{\mathrm{T}}(\ell \nu b)$ shown on the $x$ axis for the top-antiquark $p_{\mathrm{T}}$ distribution.

Migration matrix relating the parton level $|y(t)|$ shown on the $y$ axis and the reconstruction level $|y(\ell \nu b)|$ shown on the $x$ axis for the top-quark $|y|$ distribution.

Migration matrix relating the parton level $|y(\bar t)|$ shown on the $y$ axis and the reconstruction level $|y(\ell \nu b)|$ shown on the $x$ axis for the top-antiquark $|y|$ distribution.

Differential t-channel top-quark production cross section as a function of $p_{\mathrm{T}}(t)$ with the uncertainties for each bin given in percent.

Differential t-channel top-quark production cross section as a function of $p_{\mathrm{T}}(\bar t)$ with the uncertainties for each bin given in percent.

Differential t-channel top-quark production cross section as a function of $|y(t)|$ with the uncertainties for each bin given in percent.

Differential t-channel top-quark production cross section as a function of $|y(\bar t)|$ with the uncertainties for each bin given in percent.

Normalized differential t-channel top-quark production cross section as a function of $p_{\mathrm{T}}(t)$ with the uncertainties for each bin given in percent.

Normalized differential t-channel top-quark production cross section as a function of $p_{\mathrm{T}}(\bar t)$ with the uncertainties for each bin given in percent.

Normalized differential t-channel top-quark production cross section as a function of $|y(t)|$ with the uncertainties for each bin given in percent.

Normalized differential t-channel top-quark production cross section as a function of $|y(\bar t)|$ with the uncertainties for each bin given in percent.

Comparison between the measured differential cross sections and the predictions from the NLO calculation using the MSTW2008 PDF set. For each variable and prediction a $\chi^{2}$ value is calculated with HERAfitter using the covariance matrix of each measured spectrum. The theory uncertainties of the predictions are treated as uncorrelated. The number of degrees of freedom (NDF) is equal to the number of bins in the measured spectrum.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{\mathrm{d}\sigma}{\mathrm{d}p_{\mathrm{T}}(t)}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, jet-vertex fraction, $b/\bar{b}$ acceptance, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, $W+$ jets shape variation, and $t \bar{t}$ generator. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{\mathrm{d}\sigma}{\mathrm{d}p_{\mathrm{T}}(\bar t)}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, $b-$JES, jet-vertex fraction, mistag efficiency, $b/\bar{b}$ acceptance, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, $W+$ jets shape variation, and $t \bar{t}$ generator. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{\mathrm{d}\sigma}{\mathrm{d}|y(t)|}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, jet-vertex fraction, $b/\bar{b}$ acceptance, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, $W+$ jets shape variation, $t \bar{t}$ generator, $t \bar{t}$ ISR/FSR, and unfolding. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{\mathrm{d}\sigma}{\mathrm{d}|y(\bar t)|}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, $b-$JES, jet-vertex fraction, $b/\bar{b}$ acceptance, mistag efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, $W+$ jets shape variation, $t \bar{t}$ generator, $t \bar{t}$ ISR/FSR, and unfolding. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{1}{\sigma}\dfrac{\mathrm{d}\sigma}{\mathrm{d}p_{\mathrm{T}}(t)}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The JES $\eta$ intercalibration uncertainty has a sign switch from the first to the second bin. For the $tq$ generator $+$ parton shower uncertainty a sign switch is denoted with $\mp$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, $b-$JES, jet-vertex fraction, $b/\bar{b}$ acceptance, $c-$tagging efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, lepton uncertainties, $W+$ jets shape variation, and $t \bar{t}$ generator. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{1}{\sigma}\dfrac{\mathrm{d}\sigma}{\mathrm{d}p_{\mathrm{T}}(\bar t)}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. Sign switches within one uncertainty are denoted with $\mp$ and $\pm$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, $b-$JES, jet-vertex fraction, $b/\bar{b}$ acceptance, mistag efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, lepton uncertainties, $W+$ jets shape variation, and $t \bar{t}$ generator. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{1}{\sigma}\dfrac{\mathrm{d}\sigma}{\mathrm{d}|y(t)|}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. Sign switches within one uncertainty are denoted with $\mp$ and $\pm$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, b-JES, jet-vertex fraction, $b/\bar{b}$ acceptance, $b-$tagging efficiency, $c-$tagging efficiency, mistag efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, lepton uncertainties, $W+$jets shape variation, $t \bar{t}$ generator, $t \bar{t}$ISR/FSR, and unfolding. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{1}{\sigma}\dfrac{\mathrm{d}\sigma}{\mathrm{d}|y(\bar t)|}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. Sign switches within one uncertainty are denoted with $\mp$ and $\pm$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content $:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, b-JES, jet energy resolution, jet-vertex fraction, $b/\bar{b}$ acceptance, $b-$tagging efficiency, $c-$ tagging efficiency, mistag efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, lepton uncertainties, $W+$ jets shape variation, $t \bar{t}$ generator, $t \bar{t}$ ISR/FSR, and unfolding. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Statistical correlation matrices for the differential cross section as a function of $p_{\mathrm{T}}(t)$.

Statistical correlation matrices for the differential cross section as a function of $p_{\mathrm{T}}(\bar t)$.

Statistical correlation matrices for the differential cross section as a function of $|y(t)|$.

Statistical correlation matrices for the differential cross section as a function of $|y(\bar t)|$.

Statistical correlation matrices for the normalized differential cross section as a function of $p_{\mathrm{T}}(t)$.

Statistical correlation matrices for the normalized differential cross section as a function of $p_{\mathrm{T}}(\bar t)$.

Statistical correlation matrices for the normalized differential cross section as a function of $|y(t)|$.

Statistical correlation matrices for the normalized differential cross section as a function of $|y(\bar t)|$.

Fiducial $W+b$-jets cross-section correlations of statistical errors in the 1-jet region in bins of $p_T^{b-jet}$.

Fiducial $W+b$-jets cross-section correlations of systematic errors in the 1-jet region in bins of $p_T^{b-jet}$.

Fiducial $W+b$-jets cross-section correlations of statistical errors in the 1-jet region in bins of $p_T^{b-jet}$ without single-top subtraction.

Fiducial $W+b$-jets cross-section correlations of systematic errors in the 1-jet region in bins of $p_T^{b-jet}$ without single-top subtraction.

Measured fiducial $W+b$-jets cross-section in the 2-jet region with statistical and systematic uncertainties in bins of $p_T^{b-jet}$. Also shown are the cross sections obtained without single-top subtraction. UPDATE (04 MAY 2019): units corrected from nb/GeV to fb/GeV.

Fiducial $W+b$-jets cross-section correlations of statistical errors in the 2-jet region in bins of $p_T^{b-jet}$.

Fiducial $W+b$-jets cross-section correlations of systematic errors in the 2-jet region in bins of $p_T^{b-jet}$.

Fiducial $W+b$-jets cross-section correlations of statistical errors in the 2-jet region in bins of $p_T^{b-jet}$ without single-top subtraction.

Fiducial $W+b$-jets cross-section correlations of systematic errors in the 2-jet region in bins of $p_T^{b-jet}$ without single-top subtraction.

Multiplicative correction factors for non-perturbative effects and additive corrections for double-parton interactions, derived from the ALPGEN simulation, applied to the MCFM and POWHEG predictions for the comparisons with unfolded results. The non-perturbative uncertainties include the hadronization and underlying event modelling, while the DPI uncertainties are based on the ATLAS measurement of $\sigma_{\rm eff}$.

Multiplicative correction factors for non-perturbative effects and additive corrections for double-parton interactions, derived from the ALPGEN simulation, applied to the MCFM and POWHEG predictions for the comparisons with unfolded results. The non-perturbative uncertainties include the hadronization and underlying event modelling, while the DPI uncertainties are based on the ATLAS measurement of $\sigma_{\rm eff}$.

Theoretical NLO predictions for the $W+b$-jet fiducial cross-section for one lepton flavour calculated with the MCFM program, corrected for non-perturbative effects and DPI contributions.

Normalised fiducial cross section in bins of the leading lepton PT. Leading Lepton is the lepton in the final state with highest PT.

Correlations in the leading Lepton PT distribution.

Correlations in the PT distribution.

Normalised fiducial cross section in bins of the Mass of the WZ.

Correlations in the Mass distribution.

$\sqrt{s} = 7$ TeV, $p_T > 500 $ MeV, $|\eta|<2$.

$\sqrt{s} = 900$ GeV, $p_T > 500 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 7$ TeV, $p_T > 500 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 900$ GeV, $p_T > 500 $ MeV, $|\eta|<1$.

$\sqrt{s} = 7$ TeV, $p_T > 500 $ MeV, $|\eta|<1$.

$\sqrt{s} = 900$ GeV, $p_T > 500 $ MeV, $|\eta|<2$.

$\sqrt{s} = 7$ TeV, $p_T > 500 $ MeV, $|\eta|<2$.

$\sqrt{s} = 900$ GeV, $p_T > 500 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 7$ TeV, $p_T > 500 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 7$ TeV, $p_T > 100 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 7$ TeV, $p_T > 200 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 7$ TeV, $p_T > 300 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 7$ TeV, $p_T > 500 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 7$ TeV, $p_T > 1000 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 7$ TeV, $p_T > 1500 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 7$ TeV, $p_T > 2000 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 7$ TeV, $\eta$ interval: $0.0 - 0.5$.

$\sqrt{s} = 7$ TeV, $\eta$ interval: $0.5 - 1.0$.

$\sqrt{s} = 7$ TeV, $\eta$ interval: $1.0 - 1.5$.

$\sqrt{s} = 7$ TeV, $\eta$ interval: $1.5 - 2.0$.

$\sqrt{s} = 7$ TeV, $\eta$ interval: $2.0 - 2.5$.

$\sqrt{s} = 7$ TeV, $p_T > 100 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 900$ GeV, $p_T > 100 $ MeV, $|\eta|<2.5$.

$\sqrt{s} = 900$ GeV, $p_T > 100 $ MeV, $|\eta|<2.5$.

FIG. 1: (a) Raw two-particle correlation signal $Y_2$ (red), background $aB_{inc}F_2$ (solid histogram), and background systematic uncertainty from a (dashed histograms). (b) Background-subtracted two-particle correlation $\hat{Y}_2$ (red), and systematic uncertainties due to a (dashed histograms) and flow (blue histograms). (c) Raw three-particle correlation $Y_3$. (d) $ba^2Y_{inc}^2$ . (e) Sum of trig-corr-bkgd and trigger flow. Data are from 12% central Au+Au collisions. Statistical errors in (a,b) are smaller than the point size.

FIG. 1: (a) Raw two-particle correlation signal $Y_2$ (red), background $aB_{inc}F_2$ (solid histogram), and background systematic uncertainty from a (dashed histograms). (b) Background-subtracted two-particle correlation $\hat{Y}_2$ (red), and systematic uncertainties due to a (dashed histograms) and flow (blue histograms). (c) Raw three-particle correlation $Y_3$. (d) $ba^2Y_{inc}^2$ . (e) Sum of trig-corr-bkgd and trigger flow. Data are from 12% central Au+Au collisions. Statistical errors in (a,b) are smaller than the point size.

FIG. 2: Background subtracted three-particle correlations, $\hat{Y}_3$, for (a) pp, (b) d+Au, (c) 80-50% Au+Au, (d) 50-30% Au+Au, (e) 30-10% Au+Au, and (f) 12% central Au+Au. Statistical errors per bin are approximately $\pm$0.012 in (a) and $\pm$0.006 in (b), both at ($\pi$, $\pi$), and are $\pm$0.022, $\pm$0.049, $\pm$0.099 and $\pm$0.077 from (c) to (f), similar for all bins.

FIG. 2: Background subtracted three-particle correlations, $\hat{Y}_3$, for (a) pp, (b) d+Au, (c) 80-50% Au+Au, (d) 50-30% Au+Au, (e) 30-10% Au+Au, and (f) 12% central Au+Au. Statistical errors per bin are approximately $\pm$0.012 in (a) and $\pm$0.006 in (b), both at ($\pi$, $\pi$), and are $\pm$0.022, $\pm$0.049, $\pm$0.099 and $\pm$0.077 from (c) to (f), similar for all bins.

FIG. 2: Background subtracted three-particle correlations, $\hat{Y}_3$, for (a) pp, (b) d+Au, (c) 80-50% Au+Au, (d) 50-30% Au+Au, (e) 30-10% Au+Au, and (f) 12% central Au+Au. Statistical errors per bin are approximately $\pm$0.012 in (a) and $\pm$0.006 in (b), both at ($\pi$, $\pi$), and are $\pm$0.022, $\pm$0.049, $\pm$0.099 and $\pm$0.077 from (c) to (f), similar for all bins.

FIG. 2: Background subtracted three-particle correlations, $\hat{Y}_3$, for (a) pp, (b) d+Au, (c) 80-50% Au+Au, (d) 50-30% Au+Au, (e) 30-10% Au+Au, and (f) 12% central Au+Au. Statistical errors per bin are approximately $\pm$0.012 in (a) and $\pm$0.006 in (b), both at ($\pi$, $\pi$), and are $\pm$0.022, $\pm$0.049, $\pm$0.099 and $\pm$0.077 from (c) to (f), similar for all bins.

FIG. 2: Background subtracted three-particle correlations, $\hat{Y}_3$, for (a) pp, (b) d+Au, (c) 80-50% Au+Au, (d) 50-30% Au+Au, (e) 30-10% Au+Au, and (f) 12% central Au+Au. Statistical errors per bin are approximately $\pm$0.012 in (a) and $\pm$0.006 in (b), both at ($\pi$, $\pi$), and are $\pm$0.022, $\pm$0.049, $\pm$0.099 and $\pm$0.077 from (c) to (f), similar for all bins.

FIG. 2: Background subtracted three-particle correlations, $\hat{Y}_3$, for (a) pp, (b) d+Au, (c) 80-50% Au+Au, (d) 50-30% Au+Au, (e) 30-10% Au+Au, and (f) 12% central Au+Au. Statistical errors per bin are approximately $\pm$0.012 in (a) and $\pm$0.006 in (b), both at ($\pi$, $\pi$), and are $\pm$0.022, $\pm$0.049, $\pm$0.099 and $\pm$0.077 from (c) to (f), similar for all bins.

Projections of away-side three-particle correlations along the diagonal $\Sigma$ within 0 < $\Delta$ < 0.35 (squares) and along the off-diagonal $\Delta$ within |$\Sigma$| < 0.35 (points) in (a) d+Au and (b) 12% central Au+Au collisions. The shaded areas indicate systematic uncertainties on the off-diagonal projections. The histogram in (a) is the near-side off-diagonal projection. The histogram in (b) is the away-side off-diagonal projection of our result with a = b = 1. NOTE: For points with invisible error bars, the point size was considered as an absolute upper limit for the uncertainty.

Projections of away-side three-particle correlations along the diagonal $\Sigma$ within 0 < $\Delta$ < 0.35 (squares) and along the off-diagonal $\Delta$ within |$\Sigma$| < 0.35 (points) in (a) d+Au and (b) 12% central Au+Au collisions. The shaded areas indicate systematic uncertainties on the off-diagonal projections. The histogram in (a) is the near-side off-diagonal projection. The histogram in (b) is the away-side off-diagonal projection of our result with a = b = 1. NOTE: For points with invisible error bars, the point size was considered as an absolute upper limit for the uncertainty.

Three-particle correlation strength per radian$^2$ versus ($N_{part}$/2)$^{1/3}$ where $N_{part}$ is the number of participants. Some of the data points have been displaced in $N_{part}$ for clarity.