Showing 10 of 72 results
A search for supersymmetry targeting the direct production of winos and higgsinos is conducted in final states with either two leptons ($e$ or $\mu$) with the same electric charge, or three leptons. The analysis uses 139 fb$^{-1}$ of $pp$ collision data at $\sqrt{s}=13$ TeV collected with the ATLAS detector during Run 2 of the Large Hadron Collider. No significant excess over the Standard Model expectation is observed. Simplified and complete models with and without $R$-parity conservation are considered. In topologies with intermediate states including either $Wh$ or $WZ$ pairs, wino masses up to 525 GeV and 250 GeV are excluded, respectively, for a bino of vanishing mass. Higgsino masses smaller than 440 GeV are excluded in a natural $R$-parity-violating model with bilinear terms. Upper limits on the production cross section of generic events beyond the Standard Model as low as 40 ab are obtained in signal regions optimised for these models and also for an $R$-parity-violating scenario with baryon-number-violating higgsino decays into top quarks and jets. The analysis significantly improves sensitivity to supersymmetric models and other processes beyond the Standard Model that may contribute to the considered final states.
Observed exclusion limits at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 13(b) and Fig 8(aux).
positive one $\sigma$ observed exclusion limits at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 13(b) and Fig 8(aux).
negative $\sigma$ variation of observed exclusion limits at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 13(b) and Fig 8(aux).
Observed excluded cross-section at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 8(aux).
Expected exclusion limits at 95% CL for the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production.
Observed exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from from Fig 13(a) and from Fig 7 and Fig 10(aux).
Observed excluded cross-section at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 7(aux) and Fig 10(aux).
positive one $\sigma$ observed exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from from Fig 13(a) and from Fig 7 and Fig 10(aux).
negative one $\sigma$ observed exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from from Fig 13(a) and from Fig 7 and Fig 10(aux).
Expected exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production.
Expected exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production.
Expected exclusion limits at 95% CL for the Wh-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region $SR^{bRPV}_{2l-SS}$. in a susy scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV, tan$\beta$=5. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region $SR^{bRPV}_{3l}$. in a susy scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV, tan$\beta$=5. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region $SR^{WZ}_{high-m_{T2}}$. The wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{\pm} _{1}/\tilde{\chi}^{0} _{2})$ = 150 GeV, $m(\tilde{\chi}^{0} _{1})$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region $SR^{WZ}_{low-m_{T2}}$. The wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{\pm} _{1}/\tilde{\chi}^{0} _{2})$ = 150 GeV, $m(\tilde{\chi}^{0} _{1})$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the low mass $SR^{RPV}_{2l1b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the medium mass $SR^{RPV}_{2l1b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the low mass $SR^{RPV}_{2l2b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the medium mass $SR^{RPV}_{2l2b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the high mass $SR^{RPV}_{2l2b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the low mass $SR^{RPV}_{2l3b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the medium mass $SR^{RPV}_{2l3b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the high mass $SR^{RPV}_{2l3b}$, where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{0} _{1}/\tilde{\chi}^{0} _{2})$ = 200 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the $SR^{Wh}_{low-m_{T2} }$. The wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Higgs bosons. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{\pm} _{1}/\tilde{\chi}^{0} _{2})$ = 300 GeV, $m(\tilde{\chi}^{0} _{1})$ = 100 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the $SR^{Wh}_{high-m_{T2} }$. The wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Higgs bosons. The masses of the superpartners involved in the process are set to $m(\tilde{\chi}^{\pm} _{1}/\tilde{\chi}^{0} _{2})$ = 300 GeV, $m(\tilde{\chi}^{0} _{1})$ = 100 GeV. Only statistical uncertainties are shown.
Signal Hepdataeptance for $SR^{bRPV}_{2l-SS}$ signal region from Fig 13(a)(aux) in a SUSY scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays.
Signal Hepdataeptance for $SR^{bRPV}_{3l}$ signal region from Fig 13(b)(aux) in a SUSY scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays.
Signal acceptance for $SR^{WZ}_{high-m_{T2}}$ in a SUSY scenario where the wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons.
Signal acceptance for $SR^{WZ}_{low-m_{T2}}$ in a SUSY scenario where the wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons.
Signal acceptance for $SR^{RPV}_{2l1b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l1b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l2b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l2b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l2b}-H$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l3b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l3b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{RPV}_{2l3b}-H$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{bRPV}_{2l-SS}$ signal region in a SUSY scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays.
Signal efficiency for $SR^{bRPV}_{3l}$ signal region in a SUSY scenario where $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are produced in pairs and decay to all possible allowed bRPV decays.
Signal efficiency for $SR^{WZ}_{high-m_{T2}}$ in a SUSY scenario where the wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons.
Signal efficiency for $SR^{WZ}_{low-m_{T2}}$ in a SUSY scenario where the wino-like doublet pair ($\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$) were produced and then decays into $bino-like \tilde{\chi}^{0} _{1}$ which is the lightest SUSY particle (LSP) accompanied by mass on-shell or mass off-shell W and Z bosons.
Signal efficiency for $SR^{RPV}_{2l1b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l1b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l2b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l2b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l2b}-H$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l3b}-L$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l3b}-M$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal efficiency for $SR^{RPV}_{2l3b}-H$ signal region in a SUSY scenario where the $\tilde{\chi}^{0} _{1} and \tilde{\chi}^{0} _{2}$ are directly produced and undergoes prompt RPV decays.
Signal acceptance for $SR^{Wh}_{high-m_{T2} }$ signal region from Fig 11(a)(aux) in a SUSY scenario where direct production of a lightest $\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$ , decay with 100% branching ratio to a final state with a same sign light lepton (e or $\mu$) pair and two lightest neutralino1, via the on-shell emission of SM W and Higgs bosons,
Signal acceptance for $SR^{Wh}_{low-m_{T2} }$ signal region from Fig 11(b)(aux) in a SUSY scenario where direct production of a lightest $\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$ , decay with 100% branching ratio to a final state with a same sign light lepton (e or $\mu$) pair and two lightest neutralino1, via the on-shell emission of SM W and Higgs bosons,
Signal efficiency for $SR^{Wh}_{high-m_{T2} }$ signal region from Fig 15(a)(aux) in a SUSY scenario where direct production of a lightest $\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$ , decay with 100% branching ratio to a final state with a same sign light lepton (e or $\mu$) pair and two lightest neutralino1, via the on-shell emission of SM W and Higgs bosons,
Signal efficiency for $SR^{Wh}_{low-m_{T2} }$ signal region from Fig 15(b)(aux) in a SUSY scenario where direct production of a lightest $\tilde{\chi}^{\pm} _{1} and \tilde{\chi}^{0} _{2}$ , decay with 100% branching ratio to a final state with a same sign light lepton (e or $\mu$) pair and two lightest neutralino1, via the on-shell emission of SM W and Higgs bosons,
Observed 95% X-section upper limits as a function of higgsino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{1}/\tilde{\chi}^{0}_{2}$ mass in the bilinear RPV model from Fig 14.
Observed 95% X-section upper limits as a function of higgsino $\tilde{\chi}^{0}_{1}/\tilde{\chi}^{0}_{2}$ mass in the UDD RPV model from Fig 18.
Observed 95% X-section upper limits as a function of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ mass in the WZ-mediated simplified model of wino $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ production from Fig 9(aux).
N-1 distributions for $m_{T2}$ of observed data and expected background towards $SR^{WZ}_{high-m_{T2}}$ from publication's Figure 11(a) . The last bin is inclusive.
N-1 distributions for $m_{T2}$ of observed data and expected background towards $SR^{WZ}_{low-m_{T2}}$ from publication's Figure 11(b) . The last bin is inclusive.
N-1 distributions for $m_{T2}$ of observed data and expected background towards $SR^{bRPV}_{2l-SS}$ from publication's Figure 11(c) . The last bin is inclusive.
N-1 distributions for $m_{T2}$ of observed data and expected background towards $SR^{bRPV}_{3l}$ from publication's Figure 11(d) . The last bin is inclusive.
N-1 distributions for $\sum p^{b-jet}_{T}/\sum p^{jet}_{T}$ of observed data and expected background towards $SR^{RPV}_{2l1b}-L$ from publication's Figure 16(a) . The last bin is inclusive.
N-1 distributions for $\sum p^{b-jet}_{T}/\sum p^{jet}_{T}$ of observed data and expected background towards $SR^{RPV}_{2l2b}-M$ from publication's Figure 16(b) . The last bin is inclusive.
N-1 distributions for $\sum p^{b-jet}_{T}/\sum p^{jet}_{T}$ of observed data and expected background towards $SR^{RPV}_{2l3b}-H$ from publication's Figure 16(c) . The last bin is inclusive.
N-1 distribution for $E_{T}^{miss}$ in $SR^{Wh}_{high-m_{T2} }$ in ee channel
N-1 distribution for $E_{T}^{miss}$ in $SR^{Wh}_{high-m_{T2} }$ in e$\mu$ channel
N-1 distribution for $E_{T}^{miss}$ in $SR^{Wh}_{high-m_{T2} }$ in $\mu\mu$ channel
N-1 distribution for $\mathcal{S}(E_{T}^{miss})$ in $SR^{Wh}_{low-m_{T2} }$ in ee channel
N-1 distribution for $\mathcal{S}(E_{T}^{miss})$ in $SR^{Wh}_{low-m_{T2} }$ in e$\mu$ channel
N-1 distribution for $\mathcal{S}(E_{T}^{miss})$ in $SR^{Wh}_{low-m_{T2} }$ in $\mu\mu$ channel
A search for forward proton scattering in association with light-by-light scattering mediated by an axion-like particle is presented, using the ATLAS Forward Proton spectrometer to detect scattered protons and the central ATLAS detector to detect pairs of outgoing photons. Proton-proton collision data recorded in 2017 at a centre-of-mass energy of $\sqrt{s} = 13$ TeV were analysed, corresponding to an integrated luminosity of 14.6 fb$^{-1}$. A total of 441 candidate signal events were selected. A search was made for a narrow resonance in the diphoton mass distribution, corresponding to an axion-like particle (ALP) with mass in the range 150-1600 GeV. No excess is observed above a smooth background. Upper limits on the production cross section of a narrow resonance are set as a function of the mass, and are interpreted as upper limits on the ALP production coupling constant, assuming 100% decay branching ratio into a photon pair. The inferred upper limit on the coupling constant is in the range 0.04-0.09 TeV$^{-1}$ at 95%confidence level.
Signal selection efficiency as a function of ALP mass $m_{\textrm{X}}$ for the exclusive (EL), single-dissociative (SD), and double-dissociative (DD) processes. The ratio of the number of selected events to the number of generated MC events is given (black points) and is parameterised by an analytic function (red solid line). The linear (black dashed line) and cubic (blue chain line) interpolations of the black points are used to derive the envelopes (cyan filled region) which are regarded as systematic uncertainties.
The diphoton mass distribution of the mixed-data sample (black points).
The $(\xi_{\gamma\gamma}^{+},\xi_{\gamma\gamma}^{-})$ distribution of the selected data candidates after the full event selection in $m_{\gamma\gamma}$ in [150,1600] GeV with $m_{\gamma\gamma}$ contours (blue) and $y_{\gamma\gamma}$ contours (black). The range of $\xi_{\gamma\gamma}$ in which forward-proton matching is possible, $[0.035-\xi_{\textrm{th}}, 0.08+\xi_{\textrm{th}} ]$, for events that pass the matching requirement to the A or C side as indicated. No event passed the matching requirement for both the A-side and C-side.
Background-only fit to the observed numbers of events (black points) as a function of the diphoton invariant mass $m_{\gamma\gamma}$.
Expected and observed 95% CL upper limits on the signal fiducial cross section $\sigma_{\textrm{fid}}$, assuming 100% branching ratio for ALP decay into two photons, as a function of the hypothetical ALP mass $m_{\textrm{X}}$. The 1$\sigma$ and 2$\sigma$ confidence intervals are shown by the coloured bands.
Expected and observed 95% CL upper limits on the the ALP coupling constant, assuming 100% branching ratio for ALP decay into two photons, as a function of the hypothetical ALP mass $m_{\textrm{X}}$. The 1$\sigma$ and 2$\sigma$ confidence intervals are shown by the coloured bands. Contours of the ALP natural width $\Gamma$ are illustrated by the smooth blue solid lines.
Fiducial region acceptance of signal events for coupling constant f$^{-1}=0.05$ TeV$^{-1}$. EL, SD, and DD stand for the exclusive, single-dissociative, and double-dissociative processes. The acceptances are parameterised as $p_0 + p^{i}_{1} e^{p_{2}^{i} m_{\textrm{X}}} + p_{3}^{i} e^{p_{4}^{i} m_{\textrm{X}}} $ , where $i$ specifies the process type, exclusive, single-dissociative, or double-dissociative.
Correction factors $A_{\textrm{X}}/A_{0}$ and $C_{\textrm{X}}$ for the exclusive signal events with ALP coupling constant f$^{-1}$=0.05 TeV$^{-1}$, where acceptance $A_{\textrm{X}}$ and efficiency $C_{\textrm{X}}$ are defined in arXiv:2102.13405. $A_{\textrm{X}}$/$A_{0}$ and $C_{\textrm{X}}$ are parameterised as $p_0 + p^{i}_{1} e^{p_{2}^{i} m_{\textrm{X}}} + p_{3}^{i} e^{p_{4}^{i} m_{\textrm{X}}}$, where $i$ specifies the process type.
Simulated ALP signal cutflow for $m_{\rm{X}}$=300 GeV and $m_{\rm{X}}$=1200 GeV. The yields are normalized to a luminosity of 14.6 fb$^{-1}$. Selections are applied for each side after the selection on acoplanarity. The union of the sets of selected events is taken finally.
The results of a search for top squark (stop) pair production in final states with one isolated lepton, jets, and missing transverse momentum are reported. The analysis is performed with proton--proton collision data at $\sqrt{s} = 8$ TeV collected with the ATLAS detector at the LHC in 2012 corresponding to an integrated luminosity of $20$ fb$^{-1}$. The lightest supersymmetric particle (LSP) is taken to be the lightest neutralino which only interacts weakly and is assumed to be stable. The stop decay modes considered are those to a top quark and the LSP as well as to a bottom quark and the lightest chargino, where the chargino decays to the LSP by emitting a $W$ boson. A wide range of scenarios with different mass splittings between the stop, the lightest neutralino and the lightest chargino are considered, including cases where the $W$ bosons or the top quarks are off-shell. Decay modes involving the heavier charginos and neutralinos are addressed using a set of phenomenological models of supersymmetry. No significant excess over the Standard Model prediction is observed. A stop with a mass between $210$ and $640$ GeV decaying directly to a top quark and a massless LSP is excluded at $95$ % confidence level, and in models where the mass of the lightest chargino is twice that of the LSP, stops are excluded at $95$ % confidence level up to a mass of $500$ GeV for an LSP mass in the range of $100$ to $150$ GeV. Stringent exclusion limits are also derived for all other stop decay modes considered, and model-independent upper limits are set on the visible cross-section for processes beyond the Standard Model.
Expected and observed $H_{T,sig}^{miss}$ distribution for tN_med SR, before applying the $H_{T,sig}^{miss}>12$ requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed large-R jet mass distribution for tN_boost SR, before applying the large-R jet mass$>75$ GeV requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed b-jet multiplicity distribution for bCc_diag SR, before applying the b-jet multiplicity$=0$ requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed $am_{T2}$ distribution for bCd_high1 SR, before applying the $am_{T2}>200$ GeV requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed leading b-jet $p_T$ distribution for bCd_high2 SR, before applying the leading b-jet $p_T>170$ GeV requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed $E_T^{miss}$ distribution for tNbC_mix SR, before applying the $E_T^{miss}>270$ GeV requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed lepton $p_T$ distribution for bCa_low SR. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed lepton $p_T$ distribution for bCa_med SR. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed $am_T2$ distribution for bCb_med1 SR. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Expected and observed $am_T2$ distribution for bCb_high SR. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.
Best expected signal region for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1$ three-body scenario ($\tilde t_1\to bW\chi^0_1$). This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1$ four-body scenario ($\tilde t_1\to bff'\chi^0_1$). This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=150$ GeV. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=106$ GeV. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+5$ GeV. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\tilde t_1}-10$ GeV. This mapping is used for the final combined exclusion limits.
Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\tilde t_1}=300$ GeV. This mapping is used for the final combined exclusion limits.
Upper limits on the model cross-section for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Observed exclusion contour for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Expected exclusion contour for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Upper limit on signal events for the $\tilde t_1$ three-body scenario ($\tilde t_1\to bW\chi^0_1$).
Observed exclusion contour for the $\tilde t_1$ three-body scenario ($\tilde t_1\to bW\chi^0_1$).
Expected exclusion contour for the $\tilde t_1$ three-body scenario ($\tilde t_1\to bW\chi^0_1$).
Upper limit on signal events for the $\tilde t_1$ four-body scenario ($\tilde t_1\to bff'\chi^0_1$).
Observed exclusion contour for the $\tilde t_1$ four-body scenario ($\tilde t_1\to bff'\chi^0_1$).
Expected exclusion contour for the $\tilde t_1$ four-body scenario ($\tilde t_1\to bff'\chi^0_1$).
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=150$ GeV.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=150$ GeV.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=150$ GeV.
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=106$ GeV.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=106$ GeV.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=106$ GeV.
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+5$ GeV.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+5$ GeV.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+5$ GeV.
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\tilde t_1}-10$ GeV.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\tilde t_1}-10$ GeV.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\tilde t_1}-10$ GeV.
Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\tilde t_1}=300$ GeV.
Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\tilde t_1}=300$ GeV.
Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\tilde t_1}=300$ GeV.
Acceptance of tN_diag SR ($E_T^{miss}>150$ GeV, $m_T>140$ GeV) for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of tN_med SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of tN_boost SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCb_med2 SR ($am_{T2}>250$ GeV, $m_T>60$ GeV) for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCc_diag SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCd_bulk SR ($am_{T2}>175$ GeV, $m_T>120$ GeV) for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCd_high1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCd_high2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCa_med for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCa_low for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCb_med1 for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of bCb_high for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of 3-body SR ($80<am_{T2}<90$ GeV, $m_T>120$ GeV) for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$). The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Acceptance of tNbC_mix SR for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.
Efficiency of tN_diag SR ($E_T^{miss}>150$ GeV, $m_T>140$ GeV) for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of tN_med SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of tN_boost SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCb_med2 SR ($am_{T2}>250$ GeV, $m_T>60$ GeV) for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCc_diag SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCd_bulk SR ($am_{T2}>175$ GeV, $m_T>120$ GeV) for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCd_high1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCd_high2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCa_med for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCa_low for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCb_med1 for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of bCb_high for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of 3-body SR ($80<am_{T2}<90$ GeV, $m_T>120$ GeV) for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$). The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Efficiency of tNbC_mix SR for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).
Number of generated events for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Number of generated events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Number of generated events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV; $E_T^{miss}$(gen)$>60$ GeV.
Number of generated events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV; $E_T^{miss}$(gen)$>250$ GeV.
Number of generated events for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$).
Number of generated events for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Cross-section for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Cross-section for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Cross-section for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Cross-section for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$).
Cross-section for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Combined experimental systematic uncertainty of expected tN_diag SR yields for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$, using the 2 highest $E_T^{miss}$ and 2 highest $m_T$ bins.
Combined experimental systematic uncertainty of expected tN_med SR yields for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Combined experimental systematic uncertainty of expected tN_boost SR yields for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Combined experimental systematic uncertainty of expected bCb_med2 SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$, using the 2 highest $am_{T2}$ and 2 highest $m_T$ bins.
Combined experimental systematic uncertainty of expected bCc_diag SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Combined experimental systematic uncertainty of expected bCd_bulk SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$, using the 2 highest $am_{T2}$ and 2 highest $m_T$ bins.
Combined experimental systematic uncertainty of expected bCd_high1 SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Combined experimental systematic uncertainty of expected bCd_high2 SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Combined experimental systematic uncertainty of expected bCa_med SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Combined experimental systematic uncertainty of expected bCa_low SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Combined experimental systematic uncertainty of expected bCb_med1 SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Combined experimental systematic uncertainty of expected bCb_high SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Combined experimental systematic uncertainty of expected 3-body SR yields for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$), using the 2 lowest $am_{T2}$ and 2 highest $m_T$ bins.
Combined experimental systematic uncertainty of expected tNbC_mix SR yields for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed CLs in tN_diag SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Observed CLs in tN_med SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Observed CLs in tN_boost SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Observed CLs in bCb_med2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed CLs in bCc_diag SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed CLs in bCd_bulk SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed CLs in bCd_high1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed CLs in bCd_high2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Observed CLs in bCa_med SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Observed CLs in bCa_low SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Observed CLs in bCb_med1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Observed CLs in bCb_high SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Observed CLs in 3-body SR for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$).
Observed CLs in tNbC_mix SR for the mixed scenario (50% $\tilde t_1\to t\chi^0_1$, 50% $\tilde t_1\to b\chi^0_1$).
Expected CLs in tN_diag SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Expected CLs in tN_med SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Expected CLs in tN_boost SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.
Expected CLs in bCb_med2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Expected CLs in bCc_diag SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Expected CLs in bCd_bulk SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Expected CLs in bCd_high1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Expected CLs in bCd_high2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.
Expected CLs in bCa_med SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Expected CLs in bCa_low SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Expected CLs in bCb_med1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Expected CLs in bCb_high SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.
Expected CLs in 3-body SR for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$).
Expected CLs in tNbC_mix SR for the mixed scenario (50% $\tilde t_1\to t\chi^0_1$, 50% $\tilde t_1\to b\chi^\pm_1$).
A search for new phenomena has been performed in final states with at least one isolated high-momentum photon, jets and missing transverse momentum in proton--proton collisions at a centre-of-mass energy of $\sqrt{s} = 13$ TeV. The data, collected by the ATLAS experiment at the CERN LHC, correspond to an integrated luminosity of 139 $fb^{-1}$. The experimental results are interpreted in a supersymmetric model in which pair-produced gluinos decay into neutralinos, which in turn decay into a gravitino, at least one photon, and jets. No significant deviations from the predictions of the Standard Model are observed. Upper limits are set on the visible cross section due to physics beyond the Standard Model, and lower limits are set on the masses of the gluinos and neutralinos, all at 95% confidence level. Visible cross sections greater than 0.022 fb are excluded and pair-produced gluinos with masses up to 2200 GeV are excluded for most of the NLSP masses investigated.
The observed and expected (post-fit) yields in the control and validation regions. The lower panel shows the difference in standard deviations between the observed and expected yields, considering both the systematic and statistical uncertainties on the background expectation.
Observed (points with error bars) and expected background (solid histograms) distributions for $E_{T}^{miss}$ in the signal region (a) SRL, (b) SRM and (c) SRH after the background-only fit applied to the CRs. The predicted signal distributions for the two models with a gluino mass of 2000 GeV and neutralino mass of 250 GeV (SRL), 1050 GeV (SRM) or 1950 GeV (SRH) are also shown for comparison. The uncertainties in the SM background are only statistical.
Observed (points with error bars) and expected background (solid histograms) distributions for $E_{T}^{miss}$ in the signal region (a) SRL, (b) SRM and (c) SRH after the background-only fit applied to the CRs. The predicted signal distributions for the two models with a gluino mass of 2000 GeV and neutralino mass of 250 GeV (SRL), 1050 GeV (SRM) or 1950 GeV (SRH) are also shown for comparison. The uncertainties in the SM background are only statistical.
Observed (points with error bars) and expected background (solid histograms) distributions for $E_{T}^{miss}$ in the signal region (a) SRL, (b) SRM and (c) SRH after the background-only fit applied to the CRs. The predicted signal distributions for the two models with a gluino mass of 2000 GeV and neutralino mass of 250 GeV (SRL), 1050 GeV (SRM) or 1950 GeV (SRH) are also shown for comparison. The uncertainties in the SM background are only statistical.
Observed and expected exclusion limit in the gluino-neutralino mass plane at 95% CL combined using the signal region with the best expected sensitivity at each point, for the full Run-2 dataset corresponding to an integrated luminosity of $139~\mathrm{fb}^{-1}$, for $\gamma/Z$ (a) and $\gamma/h$ (b) signal models. The black solid line corresponds to the expected limits at 95% CL, with the light (yellow) bands indicating the 1$\sigma$ exclusions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves, the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties. For each point in the higgsino-bino parameter space, the labels indicate the best-expected signal region, where L, M and H mean SRL, SRM and SRH, respectively.
Observed and expected exclusion limit in the gluino-neutralino mass plane at 95% CL combined using the signal region with the best expected sensitivity at each point, for the full Run-2 dataset corresponding to an integrated luminosity of $139~\mathrm{fb}^{-1}$, for $\gamma/Z$ (a) and $\gamma/h$ (b) signal models. The black solid line corresponds to the expected limits at 95% CL, with the light (yellow) bands indicating the 1$\sigma$ exclusions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves, the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties. For each point in the higgsino-bino parameter space, the labels indicate the best-expected signal region, where L, M and H mean SRL, SRM and SRH, respectively.
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/Z$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Acceptance (left) and efficiency (right) for the $\gamma/h$ model signal grid for SRL (top), SRM (middle) and SRH (bottom).
Cutflow for the SRL selection, for two relevant signal points for both $\gamma/Z$ and $\gamma/h$ models, where the gluinos have mass of 2000 GeV and the neutralinos have a mass of 250 GeV (10000 generated events). The numbers are normalized to a luminosity of 139 $fb^{-1}$.
Cutflow for the SRM selection, for two relevant signal points for both $\gamma/Z$ and $\gamma/h$ models, where the gluinos have mass of 2000 GeV and the neutralinos have a mass of 1050 GeV (10000 generated events). The numbers are normalized to a luminosity of 139 $fb^{-1}$.
Cutflow for the SRH selection, for two relevant signal points for both $\gamma/Z$ and $\gamma/h$ models, where the gluinos have mass of 2000 GeV and the neutralinos have a mass of 1950 GeV (10000 generated events). The numbers are normalized to a luminosity of 139 $fb^{-1}$.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
Observed and expected exclusion limits in the gluino–neutralino mass plane at 95% CL for the full Run-2 dataset corresponding to an integrated luminosity of 139 fb−1 , for the (a) $\gamma/Z$ and (b) $\gamma/h$ signal models. They are obtained by combining limits from the signal region with the best expected sensitivity at each point. The dashed (black) line corresponds to the expected limits at 95% CL, with the light (yellow) band indicating the $\pm 1\sigma$ excursions due to experimental and background-theory uncertainties. The observed limits are indicated by medium (red) curves: the solid contour represents the nominal limit, and the dotted lines are obtained by varying the signal cross section by the theoretical scale and PDF uncertainties.
This paper presents a statistical combination of searches targeting final states with two top quarks and invisible particles, characterised by the presence of zero, one or two leptons, at least one jet originating from a $b$-quark and missing transverse momentum. The analyses are searches for phenomena beyond the Standard Model consistent with the direct production of dark matter in $pp$ collisions at the LHC, using 139 fb$^{-\text{1}}$ of data collected with the ATLAS detector at a centre-of-mass energy of 13 TeV. The results are interpreted in terms of simplified dark matter models with a spin-0 scalar or pseudoscalar mediator particle. In addition, the results are interpreted in terms of upper limits on the Higgs boson invisible branching ratio, where the Higgs boson is produced according to the Standard Model in association with a pair of top quarks. For scalar (pseudoscalar) dark matter models, with all couplings set to unity, the statistical combination extends the mass range excluded by the best of the individual channels by 50 (25) GeV, excluding mediator masses up to 370 GeV. In addition, the statistical combination improves the expected coupling exclusion reach by 14% (24%), assuming a scalar (pseudoscalar) mediator mass of 10 GeV. An upper limit on the Higgs boson invisible branching ratio of 0.38 (0.30$^{+\text{0.13}}_{-\text{0.09}}$) is observed (expected) at 95% confidence level.
Post-fit signal region yields for the tt0L-high and the tt0L-low analyses. The bottom panel shows the statistical significance of the difference between the SM prediction and the observed data in each region. '$t\bar{t}$ (other)' represents $t\bar{t}$ events without extra jets or events with extra light-flavour jets. 'Other' includes contributions from $t\bar{t}W$, $tZ$ and $tWZ$ processes. The total uncertainty in the SM expectation is represented with hatched bands and the expected distributions for selected signal models are shown as dashed lines.
Representative fit distribution in the signal region for the tt1L analysis: each bin of such distribution corresponds to a single SR included in the fit. 'Other' includes contributions from $t\bar{t}W$, $tZ$, $tWZ$ and $t\bar{t}$ (semileptonic) processes. The total uncertainty in the SM expectation is represented with hatched bands and the expected distributions for selected signal models are shown as dashed lines.
Representative fit distribution in the same flavour leptons signal region for the tt2L analysis: each bin of such distribution, starting from the red arrow, corresponds to a single SR included in the fit. 'FNP' includes the contribution from fake/non-prompt lepton background arising from jets (mainly $\pi/K$, heavy-flavour hadron decays and photon conversion) misidentified as leptons, estimated in a purely data-driven way. 'Other' includes contributions from $t\bar{t}W$, $tZ$ and $tWZ$ processes. The total uncertainty in the SM expectation is represented with hatched bands and the expected distributions for selected signal models are shown as dashed lines.
Summary of the total uncertainty in the background prediction for each SR of the tt0L-low, tt0L-high, tt1L and tt2L analysis channels in the statistical combination. Their dominant contributions are indicated by individual lines. Individual uncertainties can be correlated, and do not necessarily add up in quadrature to the total background uncertainty.
Exclusion limits for colour-neutral scalar mediator dark matter models as a function of the mediator mass $m(\phi)$ for a DM mass $m_{\chi} = 1$ GeV. Associated production of DM with both single top quarks ($tW$ and $tj$ channels) and top quark pairs is considered. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for each individual channel and their statistical combination.
Exclusion limits for colour-neutral pseudoscalar mediator dark matter models as a function of the mediator mass $m(a)$ for a DM mass $m_{\chi} = 1$ GeV. Associated production of DM with both single top quarks ($tW$ and $tj$ channels) and top quark pairs is considered. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for each individual channel and their statistical combination.
$E_{\text{T}}^{\text{miss}}$ distribution in SR0X for the tt0L-low analysis. The contributions from all SM backgrounds are shown after the profile likelihood simultaneous fit to all tt0L-low CRs, with the hatched bands representing the total uncertainty. The category '$t\bar{t}$ (other)' represents $t\bar{t}$ events without extra jets or events with extra light-flavour jets. 'Other' includes contributions from $t\bar{t}W$, $tZ$ and $tWZ$ processes. The expected distributions for selected signal models are shown as dashed lines. The overflow events are included in the last bin. The bottom panels show the ratio of the observed data to the total SM background prediction, with the hatched area representing the total uncertainty in the background prediction and the red arrows marking data outside the vertical-axis range.
$E_{\text{T}}^{\text{miss}}$ distribution in SRWX for the tt0L-low analysis. The contributions from all SM backgrounds are shown after the profile likelihood simultaneous fit to all tt0L-low CRs, with the hatched bands representing the total uncertainty. The category '$t\bar{t}$ (other)' represents $t\bar{t}$ events without extra jets or events with extra light-flavour jets. 'Other' includes contributions from $t\bar{t}W$, $tZ$ and $tWZ$ processes. The expected distributions for selected signal models are shown as dashed lines. The overflow events are included in the last bin. The bottom panels show the ratio of the observed data to the total SM background prediction, with the hatched area representing the total uncertainty in the background prediction and the red arrows marking data outside the vertical-axis range.
$E_{\text{T}}^{\text{miss}}$ distribution in SRTX for the tt0L-low analysis. The contributions from all SM backgrounds are shown after the profile likelihood simultaneous fit to all tt0L-low CRs, with the hatched bands representing the total uncertainty. The category '$t\bar{t}$ (other)' represents $t\bar{t}$ events without extra jets or events with extra light-flavour jets. 'Other' includes contributions from $t\bar{t}W$, $tZ$ and $tWZ$ processes. The expected distributions for selected signal models are shown as dashed lines. The overflow events are included in the last bin. The bottom panels show the ratio of the observed data to the total SM background prediction, with the hatched area representing the total uncertainty in the background prediction and the red arrows marking data outside the vertical-axis range.
Exclusion limits for colour-neutral scalar mediator dark matter models as a function of the mediator mass $m(\phi)$ for a DM mass $m_{\chi} = 1$ GeV. Associated production of DM with both single top quarks ($tW$ and $tj$ channels) and top quark pairs is considered. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the nominal cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for the tt0L-high and tt0L-low analyses and their statistical combination.
Exclusion limits for colour-neutral pseudoscalar mediator dark matter models as a function of the mediator mass $m(a)$ for a DM mass $m_{\chi} = 1$ GeV. Associated production of DM with both single top quarks ($tW$ and $tj$ channels) and top quark pairs is considered. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the nominal cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for the tt0L-high and tt0L-low analyses and their statistical combination.
Exclusion limits for colour-neutral scalar mediator dark matter models as a function of the mediator mass $m(\phi)$ for a DM mass $m_{\chi} = 1$ GeV. Only associated production of DM with top quark pairs is considered for this interpretation. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for each individual channel and their statistical combination.
Exclusion limits for colour-neutral pseudoscalar mediator dark matter models as a function of the mediator mass $m(a)$ for a DM mass $m_{\chi} = 1$ GeV. Only associated production of DM with top quark pairs is considered for this interpretation. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for each individual channel and their statistical combination.
Exclusion limits for colour-neutral scalar mediator dark matter models as a function of the mediator mass $m(\phi)$ for a DM mass $m_{\chi} = 1$ GeV. Only associated production of DM with top quark pairs is considered for this interpretation. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the nominal cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for the tt0L-high and tt0L-low analyses and their statistical combination.
Exclusion limits for colour-neutral pseudoscalar mediator dark matter models as a function of the mediator mass $m(a)$ for a DM mass $m_{\chi} = 1$ GeV. Only associated production of DM with top quark pairs is considered for this interpretation. The limits are calculated at 95% CL and are expressed in terms of the ratio of the excluded cross section to the nominal cross section for a coupling assumption of $g = g_q = g_{\chi} = 1$. The solid (dashed) lines show the observed (expected) exclusion limits for the tt0L-high and tt0L-low analyses and their statistical combination.
Representative fit distribution in the different flavour leptons signal region for the tt2L analysis: each bin of such distribution, starting from the red arrow, corresponds to a single SR included in the fit. 'FNP' includes the contribution from fake/non-prompt lepton background arising from jets (mainly $\pi/K$, heavy-flavour hadron decays and photon conversion) misidentified as leptons, estimated in a purely data-driven way. 'Other' includes contributions from $t\bar{t}W$, $tZ$ and $tWZ$ processes. The total uncertainty in the SM expectation is represented with hatched bands and the expected distributions for selected signal models are shown as dashed lines.
Signal acceptance in SR0X, SRWX and SRTX for simplified DM+$t\bar{t}$ model, defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample.
Signal acceptance in SR0X, SRWX and SRTX for simplified DM+$tW$ model, defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample.
Signal acceptance in SR0X, SRWX and SRTX for simplified DM+$tj$ model, defined as the number of accepted events at generator level in signal Monte Carlo simulation divided by the total number of events in the sample.
Signal efficiency in SR0X, SRWX and SRTX for simplified DM+$t\bar{t}$ model, defined as the number of selected reconstructed events divided by the acceptance.
Signal efficiency in SR0X, SRWX and SRTX for simplified DM+$tW$ model, defined as the number of selected reconstructed events divided by the acceptance.
Signal efficiency in SR0X, SRWX and SRTX for simplified DM+$tj$ model, defined as the number of selected reconstructed events divided by the acceptance.
Cutflow for the reference point DM+$t\bar{t}$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SR0X. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 2045000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$t\bar{t}$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SRWX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 2045000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$t\bar{t}$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SRTX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 2045000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$t\bar{t}$ $m(a, \chi) = (10, 1)$ GeV in signal region SR0X. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 400000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$t\bar{t}$ $m(a, \chi) = (10, 1)$ GeV in signal region SRWX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 400000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$t\bar{t}$ $m(a, \chi) = (10, 1)$ GeV in signal region SRTX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 400000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tW$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SR0X. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 120000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tW$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SRWX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 120000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tW$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SRTX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 120000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tW$ $m(a, \chi) = (10, 1)$ GeV in signal region SR0X. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 100000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tW$ $m(a, \chi) = (10, 1)$ GeV in signal region SRWX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 100000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tW$ $m(a, \chi) = (10, 1)$ GeV in signal region SRTX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 100000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tj$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SR0X. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 169000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tj$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SRWX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 169000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tj$ $m(\phi, \chi) = (10, 1)$ GeV in signal region SRTX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 169000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tj$ $m(a, \chi) = (10, 1)$ GeV in signal region SR0X. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 140000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tj$ $m(a, \chi) = (10, 1)$ GeV in signal region SRWX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 140000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
Cutflow for the reference point DM+$tj$ $m(a, \chi) = (10, 1)$ GeV in signal region SRTX. The column labelled 'weighted' shows the event yield including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns the 'weighted' numbers in the first and the second row, labelled 'Total' and 'Filtered', which correspond to $\mathcal{L}\cdot\sigma$ and $\mathcal{L}\cdot\sigma\cdot\epsilon$ expected, respectively. The 'Skim' selection requires the $p_{\text{T}}$ of the leading four jets to be above (80, 60, 40, 40) GeV, the missing transverse momentum $E_{\text{T}}^{\text{miss}} > 140$ GeV, the missing momentum significance $\mathcal{S} > 8$, $\Delta\phi_{\min}(\vec{p}_{\text{T,1-4}},\vec{p}_{\text{T}}^{\text{miss}}) > 0.4$ and a lepton veto. The 'Orthogonalisation' selection is defined in the main body. In total 140000 raw MC events were generated prior to the specified cuts, with the column 'Unweighted yield' collecting the numbers after each cut.
A search is presented for displaced production of Higgs bosons or $Z$ bosons, originating from the decay of a neutral long-lived particle (LLP) and reconstructed in the decay modes $H\rightarrow \gamma\gamma$ and $Z\rightarrow ee$. The analysis uses the full Run 2 data set of proton$-$proton collisions delivered by the LHC at an energy of $\sqrt{s}=13$ TeV between 2015 and 2018 and recorded by the ATLAS detector, corresponding to an integrated luminosity of 139 fb$^{-1}$. Exploiting the capabilities of the ATLAS liquid argon calorimeter to precisely measure the arrival times and trajectories of electromagnetic objects, the analysis searches for the signature of pairs of photons or electrons which arise from a common displaced vertex and which arrive after some delay at the calorimeter. The results are interpreted in a gauge-mediated supersymmetry breaking model with pair-produced higgsinos that decay to LLPs, and each LLP subsequently decays into either a Higgs boson or a $Z$ boson. The final state includes at least two particles that escape direct detection, giving rise to missing transverse momentum. No significant excess is observed above the background expectation. The results are used to set upper limits on the cross section for higgsino pair production, up to a $\tilde\chi^0_1$ mass of 369 (704) GeV for decays with 100% branching ratio of $\tilde\chi^0_1$ to Higgs ($Z$) bosons for a $\tilde\chi^0_1$ lifetime of 2 ns. A model-independent limit is also set on the production of pairs of photons or electrons with a significant delay in arrival at the calorimeter.
Average timing distributions for SR data and the estimated background as determined by the background-only fit, in each of the five exclusive $\rho$ categories. For comparison, the expected timing shapes for a few different signal models are superimposed, with each model labeled by the values of the $\tilde\chi^0_1$ mass and lifetime, as well as decay mode. To provide some indication of the variations in signal yield and shape, three signal models are shown for each of the $\tilde\chi^0_1$ decay modes, namely $\tilde\chi^0_1$ $\rightarrow$ $H \tilde G$ and $\tilde\chi^0_1$ $\rightarrow$ $Z \tilde G$. The models shown include a rather low $\tilde\chi^0_1$ mass value of 135 GeV for lifetimes of either 2 ns or 10 ns, and a higher $\tilde\chi^0_1$ mass value which is near the 95% CL exclusion limit for each decay mode for a lifetime of 2 ns. Each signal model is shown with the signal normalization corresponding to a BR value of unity for the decay mode in question.
Average timing distributions for SR data and the estimated background as determined by the background-only fit, in each of the five exclusive $\rho$ categories. For comparison, the expected timing shapes for a few different signal models are superimposed, with each model labeled by the values of the $\tilde\chi^0_1$ mass and lifetime, as well as decay mode. To provide some indication of the variations in signal yield and shape, three signal models are shown for each of the $\tilde\chi^0_1$ decay modes, namely $\tilde\chi^0_1$ $\rightarrow$ $H \tilde G$ and $\tilde\chi^0_1$ $\rightarrow$ $Z \tilde G$. The models shown include a rather low $\tilde\chi^0_1$ mass value of 135 GeV for lifetimes of either 2 ns or 10 ns, and a higher $\tilde\chi^0_1$ mass value which is near the 95% CL exclusion limit for each decay mode for a lifetime of 2 ns. Each signal model is shown with the signal normalization corresponding to a BR value of unity for the decay mode in question.
Average timing distributions for SR data and the estimated background as determined by the background-only fit, in each of the five exclusive $\rho$ categories. For comparison, the expected timing shapes for a few different signal models are superimposed, with each model labeled by the values of the $\tilde\chi^0_1$ mass and lifetime, as well as decay mode. To provide some indication of the variations in signal yield and shape, three signal models are shown for each of the $\tilde\chi^0_1$ decay modes, namely $\tilde\chi^0_1$ $\rightarrow$ $H \tilde G$ and $\tilde\chi^0_1$ $\rightarrow$ $Z \tilde G$. The models shown include a rather low $\tilde\chi^0_1$ mass value of 135 GeV for lifetimes of either 2 ns or 10 ns, and a higher $\tilde\chi^0_1$ mass value which is near the 95% CL exclusion limit for each decay mode for a lifetime of 2 ns. Each signal model is shown with the signal normalization corresponding to a BR value of unity for the decay mode in question.
Average timing distributions for SR data and the estimated background as determined by the background-only fit, in each of the five exclusive $\rho$ categories. For comparison, the expected timing shapes for a few different signal models are superimposed, with each model labeled by the values of the $\tilde\chi^0_1$ mass and lifetime, as well as decay mode. To provide some indication of the variations in signal yield and shape, three signal models are shown for each of the $\tilde\chi^0_1$ decay modes, namely $\tilde\chi^0_1$ $\rightarrow$ $H \tilde G$ and $\tilde\chi^0_1$ $\rightarrow$ $Z \tilde G$. The models shown include a rather low $\tilde\chi^0_1$ mass value of 135 GeV for lifetimes of either 2 ns or 10 ns, and a higher $\tilde\chi^0_1$ mass value which is near the 95% CL exclusion limit for each decay mode for a lifetime of 2 ns. Each signal model is shown with the signal normalization corresponding to a BR value of unity for the decay mode in question.
Average timing distributions for SR data and the estimated background as determined by the background-only fit, in each of the five exclusive $\rho$ categories. For comparison, the expected timing shapes for a few different signal models are superimposed, with each model labeled by the values of the $\tilde\chi^0_1$ mass and lifetime, as well as decay mode. To provide some indication of the variations in signal yield and shape, three signal models are shown for each of the $\tilde\chi^0_1$ decay modes, namely $\tilde\chi^0_1$ $\rightarrow$ $H \tilde G$ and $\tilde\chi^0_1$ $\rightarrow$ $Z \tilde G$. The models shown include a rather low $\tilde\chi^0_1$ mass value of 135 GeV for lifetimes of either 2 ns or 10 ns, and a higher $\tilde\chi^0_1$ mass value which is near the 95% CL exclusion limit for each decay mode for a lifetime of 2 ns. Each signal model is shown with the signal normalization corresponding to a BR value of unity for the decay mode in question.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ mass (left) and $\tilde\chi^0_1$ lifetime (right), for the different decay modes of $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$) = 1 (top) and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 (bottom). For the limits as a function of mass (lifetime), several signal models with varying lifetime (mass) are overlaid for comparison. Included are the theoretical expectations from higgsino production for each mass hypothesis, calculated from a GMSB SUSY model that assumes nearly degenerate $\tilde\chi^0_1$, $\tilde\chi^\pm_1$, and $\tilde\chi^0_2$.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ branching ratio to the SM Higgs boson, where the assumed cross-section is for higgsino production, and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 - $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$). Several signal hypotheses are overlaid that are labelled by the $\tilde\chi^0_1$ mass, all with a fixed $\tilde\chi^0_1$ lifetime of 2 ns.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ branching ratio to the SM Higgs boson, where the assumed cross-section is for higgsino production, and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 - $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$). Several signal hypotheses are overlaid that are labelled by the $\tilde\chi^0_1$ mass, all with a fixed $\tilde\chi^0_1$ lifetime of 2 ns.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ branching ratio to the SM Higgs boson, where the assumed cross-section is for higgsino production, and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 - $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$). Several signal hypotheses are overlaid that are labelled by the $\tilde\chi^0_1$ mass, all with a fixed $\tilde\chi^0_1$ lifetime of 2 ns.
The 95% CL limits on $\sigma(pp \rightarrow \tilde\chi^0_1 \tilde\chi^0_1$) in fb as a function of $\tilde\chi^0_1$ branching ratio to the SM Higgs boson, where the assumed cross-section is for higgsino production, and $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow Z +\tilde{G}$) = 1 - $\mathcal{B}$($\tilde\chi^0_1$ $\rightarrow H + \tilde{G}$). Several signal hypotheses are overlaid that are labelled by the $\tilde\chi^0_1$ mass, all with a fixed $\tilde\chi^0_1$ lifetime of 2 ns.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
The 95% CL exclusion limits on the target signal hypothesis, for $\tilde\chi^0_1$ lifetime in ns as a function of $\tilde\chi^0_1$ mass in GeV. The overlaid curves correspond to different decay hypotheses, where the assumed cross-section is for higgsino production, and the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ or $Z + \tilde{G}$ such that $\mathcal{B}(H + \tilde{G}) + \mathcal{B}(Z + \tilde{G})$ = 100%. The curve shown in red represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $Z + \tilde{G}$ with 100% branching ratio. The curve shown in blue represents the decay hypothesis where the $\tilde\chi^0_1$ decays to $H + \tilde{G}$ with 100% branching ratio.
Cutflow for an example higgsino signal with mass 225 GeV and lifetime 10 ns, in the H decay mode. Acceptance is defined at truth level, and efficiency compares the events passing at reconstruction level with respect to truth.
Cutflow for an example higgsino signal with mass 225 GeV and lifetime 10 ns, in the Z decay mode. Acceptance is defined at truth level, and efficiency compares the events passing at reconstruction level with respect to truth.
Cutflow for an example higgsino signal with mass 225 GeV and lifetime 2 ns, in the H decay mode. Acceptance is defined at truth level, and efficiency compares the events passing at reconstruction level with respect to truth.
Cutflow for an example higgsino signal with mass 225 GeV and lifetime 2 ns, in the Z decay mode. Acceptance is defined at truth level, and efficiency compares the events passing at reconstruction level with respect to truth.
Acceptance across the H decay mode signal grid, calculated using truth information. The selection applied corresponds to the model-independent signal region (i.e. the standard SR with $t_{\text{avg}$ > 0.9 ns).
Acceptance across the Z decay mode signal grid, calculated using truth information. The selection applied corresponds to the model-independent signal region (i.e. the standard SR with $t_{\text{avg}$ > 0.9 ns).
Efficiency across the H decay mode signal grid, calculated using reco information. The selection applied corresponds to the model-independent signal region (i.e. the standard SR with $t_{\text{avg}$ > 0.9 ns). Here, the numerator is the signal yield passing the reco selection and the denominator is the signal yield passing the truth selection.
Efficiency across the Z decay mode signal grid, calculated using reco information. The selection applied corresponds to the model-independent signal region (i.e. the standard SR with $t_{\text{avg}$ > 0.9 ns). Here, the numerator is the signal yield passing the reco selection and the denominator is the signal yield passing the truth selection.
A search for the electroweak production of pairs of charged sleptons or charginos decaying into two-lepton final states with missing transverse momentum is presented. Two simplified models of $R$-parity-conserving supersymmetry are considered: direct pair-production of sleptons ($\tilde{\ell}\tilde{\ell}$), with each decaying into a charged lepton and a $\tilde{\chi}_1^0$ neutralino, and direct pair-production of the lightest charginos $(\tilde{\chi}_1^\pm\tilde{\chi}_1^\mp)$, with each decaying into a $W$-boson and a $\tilde{\chi}_1^0$. The lightest neutralino ($\tilde{\chi}_1^0$) is assumed to be the lightest supersymmetric particle (LSP). The analyses target the experimentally challenging mass regions where $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and $m(\tilde{\chi}_1^\pm)-m(\tilde{\chi}_1^0)$ are close to the $W$-boson mass (`moderately compressed' regions). The search uses 139 fb$^{-1}$ of $\sqrt{s}=13$ TeV proton-proton collisions recorded by the ATLAS detector at the Large Hadron Collider. No significant excesses over the expected background are observed. Exclusion limits on the simplified models under study are reported in the ($\tilde{\ell},\tilde{\chi}_1^0$) and ($\tilde{\chi}_1^\pm,\tilde{\chi}_1^0$) mass planes at 95% confidence level (CL). Sleptons with masses up to 150 GeV are excluded at 95% CL for the case of a mass-splitting between sleptons and the LSP of 50 GeV. Chargino masses up to 140 GeV are excluded at 95% CL for the case of a mass-splitting between the chargino and the LSP down to about 100 GeV.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
Cutflow table for the slepton signal sample with $m(\tilde{\ell},\tilde{\chi}_1^0) = (100,70)$ GeV, in the SR-0J $m_{\mathrm{T2}}^{100} \in [100,\infty)$ region. The yields include the process cross section and are weighted to the 139 fb$^{-1}$ luminosity. 246000 events were generated for the sample.
Cutflow table for the slepton signal sample with $m(\tilde{\ell},\tilde{\chi}_1^0) = (100,70)$ GeV, in the SR-1J $m_{\mathrm{T2}}^{100} \in [100,\infty)$ region. The yields include the process cross section and are weighted to the 139 fb$^{-1}$ luminosity. 246000 events were generated for the sample.
Observed and expected exclusion limits on SUSY simplified models, with observed upper limits on signal cross-section (fb) overlaid, for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.
Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.
The upper panel shows the observed number of events in each of the binned SRs defined in Table 3, together with the expected SM backgrounds obtained after applying the efficiency correction method to compute the number of expected FSB events. `Others' include the non-dominant background sources, e.g. $t \bar{t}$+$V$, Higgs boson and Drell--Yan events. The uncertainty band includes systematic and statistical errors from all sources. The distributions of two signal points with mass splittings $\Delta m(\tilde{\ell},\tilde{\chi}_1^0) = m(\tilde{\ell})-m(\tilde{\chi}_1^0) = 30$ GeV and $\Delta m(\tilde{\ell},\tilde{\chi}_1^0) = m(\tilde{\ell})-m(\tilde{\chi}_1^0) = 50$ GeV are overlaid. The lower panel shows the significance as defined in Ref. [115].
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR$^{\text{-DF BDT-signal}\in(0.81,1]}_{\text{-SF BDT-signal}\in(0.77,1]}$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR$^{\text{-DF BDT-signal}\in(0.81,1]}_{\text{-SF BDT-signal}\in(0.77,1]}$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,0.8125]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,0.8125]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8125,0.815]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8125,0.815]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.815,0.8175]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.815,0.8175]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8175,0.82]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8175,0.82]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,0.8225]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,0.8225]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8225,0.825]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8225,0.825]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.825,0.8275]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.825,0.8275]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8275,0.83]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8275,0.83]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,0.8325]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,0.8325]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8325,0.835]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8325,0.835]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.835,0.8375]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.835,0.8375]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8375,0.84]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8375,0.84]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,0.845]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,0.845]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.845,0.85]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.845,0.85]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,0.86]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,0.86]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.86,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.86,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,0.775]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,0.775]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.775,0.78]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.775,0.78]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,0.785]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,0.785]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.785,0.79]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.785,0.79]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,0.795]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,0.795]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.795,0.80]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.795,0.80]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,0.81]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,0.81]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.
Cutflow table for the chargino signal sample with $m\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0=(125,25)$ GeV, in the SR-SF BDT-signal$\in (0.77,1]$ and SR-DF BDT-signal$\in (0.81,1]$ regions. The yields include the process cross-section and are weighted to the 139 fb$^{-1}$ luminosity. 170000 events were generated for the sample.
Observed and expected exclusion limits on SUSY simplified models, with observed upper limits on signal cross-section (fb) overlaid, for chargino-pair production with $W$-boson-mediated decays in the $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ plane. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.
The upper panel shows the observed number of events in the SRs defined in Table 3, together with the expected SM backgrounds obtained after the background fit in the CRs. `Others' include the non-dominant background sources, e.g.$t \bar{t}$+$V$, Higgs boson and Drell--Yan events. The uncertainty band includes systematic and statistical errors from all sources. Distributions for three benchmark signal points are overlaid for comparison. The lower panel shows the significance as defined in Ref. [115].
A search is presented for a heavy resonance $Y$ decaying into a Standard Model Higgs boson $H$ and a new particle $X$ in a fully hadronic final state. The full Large Hadron Collider Run 2 dataset of proton-proton collisions at $\sqrt{s}= 13$ TeV collected by the ATLAS detector from 2015 to 2018 is used, and corresponds to an integrated luminosity of 139 fb$^{-1}$. The search targets the high $Y$-mass region, where the $H$ and $X$ have a significant Lorentz boost in the laboratory frame. A novel signal region is implemented using anomaly detection, where events are selected solely because of their incompatibility with a learned background-only model. It is defined using a jet-level tagger for signal-model-independent selection of the boosted $X$ particle, representing the first application of fully unsupervised machine learning to an ATLAS analysis. Two additional signal regions are implemented to target a benchmark $X$ decay into two quarks, covering topologies where the $X$ is reconstructed as either a single large-radius jet or two small-radius jets. The analysis selects Higgs boson decays into $b\bar{b}$, and a dedicated neural-network-based tagger provides sensitivity to the boosted heavy-flavor topology. No significant excess of data over the expected background is observed, and the results are presented as upper limits on the production cross section $\sigma(pp \rightarrow Y \rightarrow XH \rightarrow q\bar{q}b\bar{b}$) for signals with $m_Y$ between 1.5 and 6 TeV and $m_X$ between 65 and 3000 GeV.
Acceptance times efficiency for signal grid in anomaly signal region.
Acceptance times efficiency for signal grid in anomaly signal region.
Acceptance times efficiency for signal grid in merged two-prong signal region.
Acceptance times efficiency for signal grid in merged two-prong signal region.
Acceptance times efficiency for signal grid in resolved two-prong signal region.
Acceptance times efficiency for signal grid in resolved two-prong signal region.
The obtained p-value from comparing data to background estimation across all bins, defined by windows in the X and Y particle masses, in the anomaly signal region.
The obtained p-value from comparing data to background estimation across all bins, defined by windows in the X and Y particle masses, in the anomaly signal region.
The expected 95% CL limits on the cross-section $\sigma(pp \rightarrow Y \rightarrow XH \rightarrow q\bar{q}b\bar{b}$) in pb in the two-dimensional space of $m_Y$ versus $m_X$, obtained from a simultaneous fit of both merged and resolved two-prong signal regions with all statistical and systematic uncertainties.
The expected 95% CL limits on the cross-section $\sigma(pp \rightarrow Y \rightarrow XH \rightarrow q\bar{q}b\bar{b}$) in pb in the two-dimensional space of $m_Y$ versus $m_X$, obtained from a simultaneous fit of both merged and resolved two-prong signal regions with all statistical and systematic uncertainties.
The observed 95% CL limits on the cross-section $\sigma(pp \rightarrow Y \rightarrow XH \rightarrow q\bar{q}b\bar{b}$) in pb in the two-dimensional space of $m_Y$ versus $m_X$, obtained from a simultaneous fit of both merged and resolved two-prong signal regions with all statistical and systematic uncertainties.
The observed 95% CL limits on the cross-section $\sigma(pp \rightarrow Y \rightarrow XH \rightarrow q\bar{q}b\bar{b}$) in pb in the two-dimensional space of $m_Y$ versus $m_X$, obtained from a simultaneous fit of both merged and resolved two-prong signal regions with all statistical and systematic uncertainties.
A search for strongly produced supersymmetric particles is conducted using signatures involving multiple energetic jets and either two isolated leptons ($e$ or $\mu$) with the same electric charge, or at least three isolated leptons. The search also utilises jets originating from b-quarks, missing transverse momentum and other observables to extend its sensitivity. The analysis uses a data sample corresponding to a total integrated luminosity of 20.3 fb$^{-1}$ of $\sqrt{s} =$ 8 TeV proton-proton collisions recorded with the ATLAS detector at the Large Hadron Collider in 2012. No deviation from the Standard Model expectation is observed. New or significantly improved exclusion limits are set on a wide variety of supersymmetric models in which the lightest squark can be of the first, second or third generations, and in which R-parity can be conserved or violated.
Numbers of observed and background events for SR0b for each bin of the distribution in Meff. The table corresponds to Fig. 4(b). The statistical and systematic uncertainties are combined for the expected backgrounds.
Numbers of observed and background events for SR1b for each bin of the distribution in Meff. The table corresponds to Fig. 4(c). The statistical and systematic uncertainties are combined for the predicted numbers.
Numbers of observed and background events for SR3b for each bin of the distribution in Meff. The table corresponds to Fig. 4(a). The statistical and systematic uncertainties are combined for the predicted numbers.
Numbers of observed and background events for SR3L low for each bin of the distribution in Meff. The table corresponds to Fig. 4(d). The statistical and systematic uncertainties are combined for the predicted numbers.
Numbers of observed and background events for SR3L high for each bin of the distribution in Meff. The table corresponds to Fig. 4(e). The statistical and systematic uncertainties are combined for the predicted numbers.
The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).
The efficiencies are calculated for all simplified extra dimension model (see Fig. 8d in the paper). For each model, the values are given for the five signal regions and their combination.
The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).
The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).
The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.
The efficiencies are calculated for all mSUGRA models (see Fig. 8a in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, and mu>0.
The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop) - 20 GeV.
The efficiencies are calculated for all GMSB models (see Fig. 8c in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes mmess=250 TeV, m5=3, mu>0, and Cgrav=1.
The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.
The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into b s and gluinos decay into t stop (see Fig. 5d in the paper).
The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).
The efficiencies are calculated for all mSUGRA/CMSSM models with bRPV (see Fig. 8b in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, mu>0, and bRPV.
The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).
The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).
The efficiencies are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluino), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.
The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).
The acceptances (in percent, %) are calculated for all simplified extra dimension model (see Fig. 8d in the paper). For each model, the values are given for the five signal regions and their combination.
The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).
The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).
The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.
The acceptances (in percent, %) are calculated for all mSUGRA models (see Fig. 8a in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, and mu>0.
The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop) - 20 GeV.
The acceptances (in percent, %) are calculated for all GMSB models (see Fig. 8c in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes mmess=250 TeV, m5=3, mu>0, and Cgrav=1.
The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.
The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into bs and gluinos decay into t stop (see Fig. 5d in the paper).
The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).
The acceptances (in percent, %) are calculated for all mSUGRA/CMSSM models with bRPV (see Fig. 8b in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, mu>0, and bRPV.
The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).
The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).
The acceptances (in percent, %) are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluino), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.
The limits on observed cross section are calculated for all simplified models. The simplified models are for direct pair production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).
The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct pair-production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).
The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).
The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.
The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct pair production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop) - 20 GeV.
The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.
The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into bs and gluinos decay into t stop (see Fig. 5d in the paper).
The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).
The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).
The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).
The limits on observed cross sections are calculated for all simplified models. The simplified models are for direct pair production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluino), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.
The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).
The signal event yields are calculated for all simplified extra dimension model (see Fig. 8d in the paper). For each model, the values are given for the five signal regions and their combination.
The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).
The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).
The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.
The signal event yields are calculated for all mSUGRA models (see Fig. 8a in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, and mu>0.
The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop)-20 GeV.
The signal event yields are calculated for all GMSB models (see Fig. 8c in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes mmess=250 TeV, m5=3, mu>0, and Cgrav=1.
The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.
The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into bs and gluinos decay into t stop (see Fig. 5d in the paper).
The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).
The signal event yields are calculated for all mSUGRA/CMSSM models with bRPV (see Fig. 8b in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, mu>0, and bRPV.
The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).
The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).
The signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluino), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.
Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).
Experimental uncertainties on the signal event yields are calculated for all simplified extra dimension model (see Fig. 8d in the paper). For each model, the values are given for the five signal regions and their combination.
Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).
Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).
Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.
Experimental uncertainties on the signal event yields are calculated for all mSUGRA models (see Fig. 8a in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, and mu>0.
Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop) - 20 GeV.
Experimental uncertainties on the signal event yields are calculated for all GMSB models (see Fig. 8c in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes mmess=250 TeV, m5=3, mu>0, and Cgrav=1.
Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.
Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into bs and gluinos decay into t stop (see Fig. 5d in the paper).
Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).
Experimental uncertainties on the signal event yields are calculated for all mSUGRA/CMSSM models with bRPV (see Fig. 8b in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, mu>0, and bRPV.
Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).
Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).
Experimental uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluino), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.
Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).
Statistical uncertainties on the signal event yields are calculated for all simplified extra dimension model (see Fig. 8d in the paper). For each model, the values are given for the five signal regions and their combination.
Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).
Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).
Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.
Statistical uncertainties on the signal event yields are calculated for all mSUGRA models (see Fig. 8a in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, and mu>0.
Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop) - 20 GeV.
Statistical uncertainties on the signal event yields are calculated for all GMSB models (see Fig. 8c in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes mmess=250 TeV, m5=3, mu>0, and Cgrav=1.
Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.
Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into bs and gluinos decay into t stop (see Fig. 5d in the paper).
Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).
Statistical uncertainties on the signal event yields are calculated for all mSUGRA/CMSSM models with bRPV (see Fig. 8b in the paper). For each model, the values are given for the five signal regions and their combination. The model assumes tan(beta)=30, A0=2m0, mu>0, and bRPV.
Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).
Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).
Statistical uncertainties on the signal event yields are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W ^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluino), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.
The confidence levels are calculated for all simplified models. For each model, the observed and expected values are given. The simplified model is for direct production of gluinos that decay into t tbar t tbar chi1^0 chi1^0 (see Fig. 5a in the paper). This particular model assumes that top quark is much heavier than gluino.
The confidence levels are calculated for all simplified models. For each model, the observed and expected values are given. The simplified model is for direct production of squarks that decay into two steps into q q W Z W Z chi1^0 chi1^0 (see Fig. 6c in the paper).
The confidence levels are calculated for all simplified models. For each model, the values are given for the five signal regions and their combination. The simplified model is for direct pair-production of gluinos that decay via a two-step process into q q q q W Z W Z chi1^0 chi1^0 (see Fig. 6b in the paper).
The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of gluinos that decay via sleptons into q q q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6d in the paper).
The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct pair-production of gluinos. A gluino decays into t stop. Consequently, a top squark squark decays into b chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 5b in the paper). This particular model assumes that m(stop) < m(gluion), m(chi1^0)=6 GeV, and m(chi1^(+-))=118 GeV.
The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of gluinos. A gluino decays into t c chi1^0 (see Fig. 5c in the paper). This particular model assumes that m(chi1^0) = m(stop) - 20 GeV.
The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7b in the paper). This particular model assumes that m(chi1^0)=2(chi1^0).
The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of bottom squarks. A bottom squark decays into t chi1^(+-) and chi1^(+-) --> W^(+-) chi1^0 (see Fig. 7a in the paper). This particular model assumes that m(chi1^0)=60 GeV.
The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of squarks. Squarks decay into q q l l (l l) chi1^0 chi1^0 + neutrinos (see Fig. 6e in the paper).
The confidence levels are calculated for all GMSB models (see Fig. 8c in the paper). For each model, the expected and observed values are given. The model assumes mmess=250 TeV, m5=3, mu>0, and Cgrav=1.
The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of gluinos and top squarks. Top squarks undergo R-parity violating decays into bs and gluinos decay into t stop (see Fig. 5d in the paper).
The confidence levels are calculated for all mSUGRA/CMSSM models with bRPV (see Fig. 8b in the paper). For each model, the expected and observed values are given. The model assumes tan(beta)=30, A0=2m0, mu>0, and bRPV.
The confidence levels are calculated for all simplified extra dimension model (see Fig. 8d in the paper). For each model, the expected and observed values are given.
The confidence levels are calculated for all simplified models. For each model, the expected and observed values are given. The simplified model is for direct production of gluinos that decay into q q q q W W chi1^0 chi1^0 (see Fig. 6a in the paper).
The confidence levels are calculated for all mSUGRA models (see Fig. 8a in the paper). For each model, the expected and observed values are given. The model assumes tan(beta)=30, A0=2m0, and mu>0.
A search for diphoton resonances in the mass range between 10 and 70 GeV with the ATLAS experiment at the Large Hadron Collider (LHC) is presented. The analysis is based on $pp$ collision data corresponding to an integrated luminosity of 138 fb$^{-1}$ at a centre-of-mass energy of 13 TeV recorded from 2015 to 2018. Previous searches for diphoton resonances at the LHC have explored masses down to 65 GeV, finding no evidence of new particles. This search exploits the particular kinematics of events with pairs of closely spaced photons reconstructed in the detector, allowing examination of invariant masses down to 10 GeV. The presented strategy covers a region previously unexplored at hadron colliders because of the experimental challenges of recording low-energy photons and estimating the backgrounds. No significant excess is observed and the reported limits provide the strongest bound on promptly decaying axion-like particles coupling to gluons and photons for masses between 10 and 70 GeV.
The expected and observed upper limits at 95\% CL on the fiducial cross-section times branching ratio to two photons of a narrow-width ($\Gamma_{X}$ = 4 MeV) scalar resonance as a function of its mass $m_{X}$.
Diphoton invariant mass in the signal region using a 0.1 GeV binning.
Parametrization of the $C_{X}$ factor, defined as the ratio between the number of reconstructed signal events passing the analysis cuts and the number of signal events at the particle level generated within the fiducial volume, as function of $m_{X}$ obtained from the narrow width simulated signal samples produced in gluon fusion.
Parametrization of the $A_{X}$ factor, defined as the fraction of diphoton resonances satisfying the fiducial acceptance at the particle level, as function of $m_{X}$ obtained from the narrow width simulated signal samples produced in gluon fusion.
The correction factor, $C_{X}$, defined as the ratio between the number of reconstructed signal events passing the analysis cuts and the number of signal events at the particle level generated within the fiducial volume, and acceptance correction factor, $A_{X}$, defined as the fraction of diphoton resonances satisfying the fiducial acceptance at the particle level. Both are computed for NWA spin-0 models as a function of $m_{X}$.
Effect of event selections on a scalar MC signal sample generated for $m_{X}$ = 15 GeV and on the data. For the MC sample, the efficiencies are shown after applying event weights and a truth level filter that requires two photons with $p^{\gamma\gamma}_{T}>40$ GeV; for the data, the absolute yields are shown. The initial yields for data include a trigger preselection that is the OR of a list of single photon and diphoton triggers. The "2 $loose$ photons" step includes the kinematic acceptance cuts.
Parameterization of the Double Sided Crystal Ball function parameters describing the scalar mass resolution model as a function of $m_{X}$ [GeV].
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But sometimes you may wish to be more specific. Here we show you how.
Guidance on the query string syntax can also be found in the OpenSearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.