The growth and development of “charged particle jets” produced in proton-antiproton collisions at 1.8 TeV are studied over a transverse momentum range from 0.5 GeV/c to 50 GeV/c. A variety of leading (highest transverse momentum) charged jet observables are compared with the QCD Monte Carlo models HERWIG, ISAJET, and PYTHIA. The models describe fairly well the multiplicity distribution of charged particles within the leading charged jet, the size of the leading charged jet, the radial distribution of charged particles and transverse momentum around the leading charged jet direction, and the momentum distribution of charged particles within the leading charged jet. The direction of the leading “charged particle jet” in each event is used to define three regions of η−φ space. The “toward” region contains the leading “charged particle jet,” while the “away” region, on the average, contains the away-side jet. The “transverse” region is perpendicular to the plane of the hard 2-to-2 scattering and is very sensitive to the “underlying event” component of the QCD Monte Carlo models. HERWIG, ISAJET, and PYTHIA with their default parameters do not describe correctly all the properties of the “transverse” region.
Average number of charged particles as a function of the relative azimuthal angle between the individual charged particle and the overall leading jet angle.
Average scalar PT sum of charged particles as a function of the relative azimuthal angle between the individual charged particle for 3 different lower limits of the leading jet PT. and the overall jet angle.
The average number of toward(DPHI < 60 DEG), transverse (DPHI 60 TO 120 DEG) and away (DPHI > 120 DEG) charged particles as a function of the PT of the leading charged jet. The data in this table are from the Min-Bias events.
We present a measurement of the inclusive jet cross section in p¯p collisions at √s =1.8 TeV at the Fermilab Tevatron using the Collider Detector at Fermilab. Good agreement is seen with the predictions of recent next-to-leading-order [O(αs3)] QCD predictions. The dependence of the cross section on clustering cone size is reported for the first time. An improved limit on Λc, a term characterizing possible quark substructure, is set at 1.4 TeV (95% C.L.).
Data are averaged over the pseudorapidity interval 0.1 to 0.7.
The production rate of charged D* mesons in jets has been measured in 1.8-TeV p¯p collisions at the Fermilab Tevatron with the Collider Detector at Fermilab. In a sample of approximately 32 300 jets with a mean transverse energy of 47 GeV obtained from an exposure of 21.1 nb−1, a signal corresponding to 25.0±7.5(stat)±2.0(syst) D*±→K∓π±π± events is seen above background. This corresponds to a ratio N(D*++D*−)/N(jet) =0.10±0.03±0.03 for D* mesons with fractional momentum z greater than 0.1.
Mean jet transverse energy is 47 GeV. Branching rates for D* --> D0 PI of 0.57 +- 0.04 (DSYS=0.04) and D0 --> K- PI+ of 0.042 +- 0.004 (DSYS=0.004), from MARK-III have been used.
Inclusive jet production at s=1.8 TeV has been measured in the CDF detector at the Fermilab Tevatron p¯p Collider. Jets with transverse energies (Et) up to 250 GeV have been observed. The Et dependence of the inclusive jet cross section is consistent with leading-order quantum-chromodynamic calculations, and comparison with lower-energy data shows deviations from scaling consistent with QCD. A lower limit of 700 GeV (95% confidence level) is placed on the quark compositeness scale parameter Λc associated with an effective contact interaction.
No description provided.
For comparison of inclusive jet cross sections measured at hadron-hadron colliders to next-to-leading order (NLO) parton-level calculations, the energy deposited in the jet cone by spectator parton interactions must first be subtracted. The assumption made at the Tevatron is that the spectator parton interaction energy is similar to the ambient level measured in minimum bias events. In this paper, we test this assumption by measuring the ambient charged track momentum in events containing large transverse energy jets at $\sqrt{s}=1800$ GeV and $\sqrt{s}=630$ GeV and comparing this ambient momentum with that observed both in minimum bias events and with that predicted by two Monte Carlo models. Two cones in $\eta$--$\phi$ space are defined, at the same pseudo-rapidity, $\eta$, as the jet with the highest transverse energy ($E_T^{(1)}$), and at $\pm 90^o$ in the azimuthal direction, $\phi$. The total charged track momentum inside each of the two cones is measured. The minimum momentum in the two cones is almost independent of $E_T^{(1)}$ and is similar to the momentum observed in minimum bias events, whereas the maximum momentum increases roughly linearly with the jet $E_T^{(1)}$ over most of the measured range. This study will help improve the precision of comparisons of jet cross section data and NLO perturbative QCD predictions. %this is new The distribution of the sum of the track momenta in the two cones is also examined for five different $E_T^{(1)}$ bins. The HERWIG and PYTHIA Monte Carlos are reasonably successful in describing the data, but neither can describe completely all of the event properties.
Average PT inside the max and min cone for cm energy 1800 GeV.
Data points read from plot.
Data points read from plot.
We report on measurements of the inclusive jet production cross section as a function of the jet transverse momentum in pp-bar collisions at sqrt{s} = 1.96 TeV}, using the k_T algorithm and a data sample corresponding to 1.0 fb^-1 collected with the Collider Detector at Fermilab in Run II. The measurements are carried out in five different jet rapidity regions with |yjet| < 2.1 and transverse momentum in the range 54 < \ptjet < 700 GeV/c. Next-to-leading order perturbative QCD predictions are in good agreement with the measured cross sections.
Measured inclusive jet differential cross section as a function of PT for the rapidity range -0.1 to 0.1 with the jet resolution parameter D = 0.7.
Measured inclusive jet differential cross section as a function of PT for the absoloute rapidity range 0.1 to 0.7 with the jet resolution parameter D = 0.7.
Measured inclusive jet differential cross section as a function of PT for the absolute rapidity range 0.7 to 1.1 with the jet resolution parameter D = 0.7.
The inclusive jet differential cross section has been measured for jet transverse energies, $E_T$, from 15 to 440 GeV, in the pseudorapidity region 0.1$\leq | \eta| \leq $0.7. The results are based on 19.5 pb$~{-1}$ of data collected by the CDF collaboration at the Fermilab Tevatron collider. The data are compared with QCD predictions for various sets of parton distribution functions. The cross section for jets with $E_T>200$\ GeV is significantly higher than current predictions based on O($\alpha_s~3$) perturbative QCD calculations. Various possible explanations for the high-$E_T$\ excess are discussed.
No description provided.
We present a measurement of the shapes of b-jets using 300 pb-1 of data obtained with the upgraded Collider Detector at Fermilab (CDF II) in p pbar collisions at center of mass energy sqrt{s}=1.96 TeV. This measurement covers a wide transverse momentum range, from 52 to 300 GeV/c. Samples of heavy-flavor enhanced jets together with inclusive jets are used to extract the average shapes of b-jets. The b-jets are expected to be broader than inclusive jets. Moreover, b-jets containing a single b-quark are expected to be narrower than those containing a b bbar pair from gluon splitting. The measured b-jet shapes are found to be significantly broader than expected from the PYTHIA and HERWIG Monte Carlo simulations. This effect may arise from an underestimation of the fraction of b-jets originating from gluon splitting in these simulations.
Measured integrated jet shapes for b-jets as a function of the jet cone parameter R with R0=0.7, for jet PT from 52 to 80 GeV.
Measured integrated jet shapes for b-jets as a function of the jet cone parameter R with R0=0.7, for jet PT from 80 to 104 GeV.
Measured integrated jet shapes for b-jets as a function of the jet cone parameter R with R0=0.7, for jet PT from 104 to 142 GeV.
We report on a study of jet shapes in inclusive jet production in $p \bar{p}$ collisions at $\sqrt{s} = 1.96 {\rm TeV}$ using the upgraded Collider Detector at Fermilab in Run II (CDF II) based on an integrated luminosity of $170 \rm pb^{-1}$. Measurements are carried out on jets with rapidity $0.1 < |Y^{\rm jet}| < 0.7$ and transverse momentum 37 GeV/c $< P_T^{\rm jet} < 380$ GeV/c. The jets have been corrected to the hadron level. The measured jet shapes are compared to leading-order QCD parton-shower Monte Carlo predictions as implemented in the PYTHIA and HERWIG programs. PYTHIA, tuned to describe the underlying event as measured in CDF Run I, provides a better description of the measured jet shapes than does PYTHIA or HERWIG with their default parameters.
The measured differential jet shape.
The measured differential jet shape.
The measured differential jet shape.
We present a measurement of the inclusive jet cross section in p-pbar collisions at sqrt{s}=1.96 TeV based on data collected by the CDF II detector with an integrated luminosity of 1.13 fb^-1. The measurement was made using the cone-based Midpoint jet clustering algorithm in the rapidity region of |y|<2.1. The results are consistent with next-to-leading-order perturbative QCD predictions based on recent parton distribution functions (PDFs), and are expected to provide increased precision in PDFs at high parton momentum fraction x. The results are also compared to the recent inclusive jet cross section measurement using the k_T jet clustering algorithm, and we find that the ratio of the cross sections measured with the two algorithms is in agreement with theoretical expectations over a large range of jet transverse momentum and rapidity.
Measured inclusive jet cross section as a function of jet transverse momentum in the absolute rapidity region < 0.1. The bin-by-bin correction factors from parton to hadron-level are also tabulated.
Measured inclusive jet cross section as a function of jet transverse momentum in the absolute rapidity region 0.1 to 0.7. The bin-by-bin correction factors from parton to hadron-level are also tabulated.
Measured inclusive jet cross section as a function of jet transverse momentum in the absolute rapidity region 0.7 to 1.1. The bin-by-bin correction factors from parton to hadron-level are also tabulated.
Forum