The differential cross section of $Z$ boson production scaled by 1/$p_\mathrm{T}^{Z}$, (1/$p_\mathrm{T}^{Z}$) $d\sigma /dp_\mathrm{T}^{Z}$, for $-3<y^\mathrm{*}_{Z}<2$.

The differential cross section of $Z$ boson production scaled by 1/$p_\mathrm{T}^{Z}$, (1/$p_\mathrm{T}^{Z}$) $d\sigma /dp_\mathrm{T}^{Z}$, for $-2<y^\mathrm{*}_{Z}<0$ and $0<y^\mathrm{*}_{Z}<2.

Centrality bias corrected $Z$ boson yields per event for $-3<y^\mathrm{*}_{Z}<2$ scaled by by $\langle N_{coll}\rangle$. (To remove the centrality bias correction each value may be multiplied by the approriate correction value found in arXiv:1412.0976.).

The rapidity differential Z boson yields per event scaled by $\langle N_{coll}\rangle$ for three centrality ranges.

Detailed list of the contribution of each source of uncertainty to the total uncertainty on the measured values of $\sigma(tq)$, $\sigma(\bar{t}q)$, $R_t$, and $\sigma(tq+\bar{t}q)$. The evaluation of the systematic uncertainties has a statistical uncertainty of $0.3\,\%$. Uncertainties contributing less than $1.0\,\%$ are marked with "$<1$" in the paper. To provide numerical values for this table in HEPdata, these uncertainties are approximated with $\pm 0.5\,\%$. This approximation is applied to all measurements for the following uncertainties$:$ JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by-jets, JES pileup, $b$-JES, jet vertex fraction, mistag efficiency and $W+\;$jets shape variation. For the measurement of $\sigma(tq)$ the approximation is applied in addition to the following uncertainties$:$ JES flavor response, $c$-tagging efficiency, $t\bar{t}$ generator + parton shower and $t\bar{t}$ ISR/FSR. For the measurement of $\sigma(\bar{t}q)$ the approximation is applied in addition to these uncertainties$:$ JES flavor response, $b/\bar{b}$ acceptance, and $t\bar{t}$ ISR/FSR. For the measurement of $R_t$ the approximation is applied in addition to these uncertainties$:$ JES detector, $b$-tagging efficiency, $c$-tagging efficiency, $b/\bar{b}$ acceptance and $tq$ scale variations. For the measurement of $\sigma(tq+\bar{t}q)$ the approximation is applied in addition to these uncertainties$:$ JES flavor response, $c$-tagging efficiency, $b/\bar{b}$ acceptance, $t\bar{t}$ generator + parton shower and $t\bar{t}$ ISR/FSR.

Differential t-channel top-quark production cross sections and normalized differential t-channel top-quark production cross sections as functions of ABS(YRAP(T)).

The cross sections for top-quark and top-antiquark production in the t-channel, together with the cross-section ratio.

Differential t-channel top-quark production cross sections and normalized differential t-channel top-quark production cross sections as functions of ABS(YRAP(TBAR)).

Parametrization factors for the $m_{t}$ dependence [see Eq. (4) in the paper] of $\sigma(tq)$, $\sigma(\bar tq)$, and $\sigma(t q+\bar t q)$.

The cross sections for top-quark and top-antiquark production in the t-channel, together with the cross-section ratio.

The value of $|V_{tb}|^{2}$ is extracted by dividing the measured value of $\sigma(t q+\bar t q)$ by the prediction of the approximate NNLO calculation. The experimental and theoretical uncertainties are added in quadrature.

Event yields for the 2-jet-$\ell^{+}$ and 2-jet-$\ell^{-}$ HPR channels. The expectation for the signal and background yields correspond to the result of the binned maximum-likelihood fit described in Sec. $\mathrm{VI~D}$ in the paper. The uncertainty of the expectations is the normalization uncertainty of each process after the fit, as described in Sec. $\mathrm{VII~F}$ in the paper.

Migration matrix relating the parton level $p_{\mathrm{T}}(t)$ shown on the $y$ axis and the reconstruction level $p_{\mathrm{T}}(\ell \nu b)$ shown on the $x$ axis for the top-quark $p_{\mathrm{T}}$ distribution.

Migration matrix relating the parton level $p_{\mathrm{T}}(\bar t)$ shown on the $y$ axis and the reconstruction level $p_{\mathrm{T}}(\ell \nu b)$ shown on the $x$ axis for the top-antiquark $p_{\mathrm{T}}$ distribution.

Migration matrix relating the parton level $|y(t)|$ shown on the $y$ axis and the reconstruction level $|y(\ell \nu b)|$ shown on the $x$ axis for the top-quark $|y|$ distribution.

Migration matrix relating the parton level $|y(\bar t)|$ shown on the $y$ axis and the reconstruction level $|y(\ell \nu b)|$ shown on the $x$ axis for the top-antiquark $|y|$ distribution.

Differential t-channel top-quark production cross section as a function of $p_{\mathrm{T}}(t)$ with the uncertainties for each bin given in percent.

Differential t-channel top-quark production cross section as a function of $p_{\mathrm{T}}(\bar t)$ with the uncertainties for each bin given in percent.

Differential t-channel top-quark production cross section as a function of $|y(t)|$ with the uncertainties for each bin given in percent.

Differential t-channel top-quark production cross section as a function of $|y(\bar t)|$ with the uncertainties for each bin given in percent.

Normalized differential t-channel top-quark production cross section as a function of $p_{\mathrm{T}}(t)$ with the uncertainties for each bin given in percent.

Normalized differential t-channel top-quark production cross section as a function of $p_{\mathrm{T}}(\bar t)$ with the uncertainties for each bin given in percent.

Normalized differential t-channel top-quark production cross section as a function of $|y(t)|$ with the uncertainties for each bin given in percent.

Normalized differential t-channel top-quark production cross section as a function of $|y(\bar t)|$ with the uncertainties for each bin given in percent.

Comparison between the measured differential cross sections and the predictions from the NLO calculation using the MSTW2008 PDF set. For each variable and prediction a $\chi^{2}$ value is calculated with HERAfitter using the covariance matrix of each measured spectrum. The theory uncertainties of the predictions are treated as uncorrelated. The number of degrees of freedom (NDF) is equal to the number of bins in the measured spectrum.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{\mathrm{d}\sigma}{\mathrm{d}p_{\mathrm{T}}(t)}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, jet-vertex fraction, $b/\bar{b}$ acceptance, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, $W+$ jets shape variation, and $t \bar{t}$ generator. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{\mathrm{d}\sigma}{\mathrm{d}p_{\mathrm{T}}(\bar t)}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, $b-$JES, jet-vertex fraction, mistag efficiency, $b/\bar{b}$ acceptance, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, $W+$ jets shape variation, and $t \bar{t}$ generator. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{\mathrm{d}\sigma}{\mathrm{d}|y(t)|}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, jet-vertex fraction, $b/\bar{b}$ acceptance, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, $W+$ jets shape variation, $t \bar{t}$ generator, $t \bar{t}$ ISR/FSR, and unfolding. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{\mathrm{d}\sigma}{\mathrm{d}|y(\bar t)|}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, $b-$JES, jet-vertex fraction, $b/\bar{b}$ acceptance, mistag efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, $W+$ jets shape variation, $t \bar{t}$ generator, $t \bar{t}$ ISR/FSR, and unfolding. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{1}{\sigma}\dfrac{\mathrm{d}\sigma}{\mathrm{d}p_{\mathrm{T}}(t)}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. The JES $\eta$ intercalibration uncertainty has a sign switch from the first to the second bin. For the $tq$ generator $+$ parton shower uncertainty a sign switch is denoted with $\mp$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, $b-$JES, jet-vertex fraction, $b/\bar{b}$ acceptance, $c-$tagging efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, lepton uncertainties, $W+$ jets shape variation, and $t \bar{t}$ generator. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{1}{\sigma}\dfrac{\mathrm{d}\sigma}{\mathrm{d}p_{\mathrm{T}}(\bar t)}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. Sign switches within one uncertainty are denoted with $\mp$ and $\pm$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, $b-$JES, jet-vertex fraction, $b/\bar{b}$ acceptance, mistag efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, lepton uncertainties, $W+$ jets shape variation, and $t \bar{t}$ generator. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{1}{\sigma}\dfrac{\mathrm{d}\sigma}{\mathrm{d}|y(t)|}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. Sign switches within one uncertainty are denoted with $\mp$ and $\pm$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content$:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, b-JES, jet-vertex fraction, $b/\bar{b}$ acceptance, $b-$tagging efficiency, $c-$tagging efficiency, mistag efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, lepton uncertainties, $W+$jets shape variation, $t \bar{t}$ generator, $t \bar{t}$ISR/FSR, and unfolding. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Detailed list of the contribution of each source of uncertainty to the total relative uncertainty on the measured $\dfrac{1}{\sigma}\dfrac{\mathrm{d}\sigma}{\mathrm{d}|y(\bar t)|}$ distribution given in percent for each bin. The list includes only those uncertainties that contribute with more than $1\%$. Sign switches within one uncertainty are denoted with $\mp$ and $\pm$. The following uncertainties contribute to the total uncertainty with less than $1\%$ to each bin content $:$ JES detector, JES statistical, JES physics modeling, JES mixed detector and modeling, JES close-by jets, JES pileup, JES flavor composition, JES flavor response, b-JES, jet energy resolution, jet-vertex fraction, $b/\bar{b}$ acceptance, $b-$tagging efficiency, $c-$ tagging efficiency, mistag efficiency, $E_{\mathrm{T}}^{\mathrm{miss}}$ modeling, lepton uncertainties, $W+$ jets shape variation, $t \bar{t}$ generator, $t \bar{t}$ ISR/FSR, and unfolding. In cases when the uncertainty is report to be "$<1\%$" in the table of the paper the uncertainty is approximated by a value of $0.5\%$.

Statistical correlation matrices for the differential cross section as a function of $p_{\mathrm{T}}(t)$.

Statistical correlation matrices for the differential cross section as a function of $p_{\mathrm{T}}(\bar t)$.

Statistical correlation matrices for the differential cross section as a function of $|y(t)|$.

Statistical correlation matrices for the differential cross section as a function of $|y(\bar t)|$.

Statistical correlation matrices for the normalized differential cross section as a function of $p_{\mathrm{T}}(t)$.

Statistical correlation matrices for the normalized differential cross section as a function of $p_{\mathrm{T}}(\bar t)$.

Statistical correlation matrices for the normalized differential cross section as a function of $|y(t)|$.

Statistical correlation matrices for the normalized differential cross section as a function of $|y(\bar t)|$.

Differential cross-sections for EW $Zjj$ production as a function of $\Delta\phi_{jj}$ with breakdown of associated uncertainties. The statistical uncertainty is correlated across bins according to the statistical cross correlation matrix presented in Table 21.

Differential cross-sections for inclusive $Zjj$ production in the EW $Zjj$ signal region ($N^\mathrm{gap}_\mathrm{jets}=0$, $\xi_Z < 0.5$) as a function of $m_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in the EW $Zjj$ signal region ($N^\mathrm{gap}_\mathrm{jets}=0$, $\xi_Z < 0.5$) as a function of $\Delta y_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in the EW $Zjj$ signal region ($N^\mathrm{gap}_\mathrm{jets}=0$, $\xi_Z < 0.5$) as a function of $p_{\mathrm{T},\ell\ell}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in the EW $Zjj$ signal region ($N^\mathrm{gap}_\mathrm{jets}=0$, $\xi_Z < 0.5$) as a function of $\Delta\phi_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRa ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z < 0.5$) as a function of $m_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRa ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z < 0.5$) as a function of $\Delta y_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRa ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z < 0.5$) as a function of $p_{\mathrm{T},\ell\ell}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRa ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z < 0.5$) as a function of $\Delta\phi_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRb ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z > 0.5$) as a function of $m_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRb ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z > 0.5$) as a function of $\Delta y_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRb ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z > 0.5$) as a function of $p_{\mathrm{T},\ell\ell}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRb ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z > 0.5$) as a function of $\Delta\phi_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRc ($N^\mathrm{gap}_\mathrm{jets} = 0$, $\xi_Z > 0.5$) as a function of $m_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRc ($N^\mathrm{gap}_\mathrm{jets} = 0$, $\xi_Z > 0.5$) as a function of $\Delta y_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRc ($N^\mathrm{gap}_\mathrm{jets} = 0$, $\xi_Z > 0.5$) as a function of $p_{\mathrm{T},\ell\ell}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRc ($N^\mathrm{gap}_\mathrm{jets} = 0$, $\xi_Z > 0.5$) as a function of $\Delta\phi_{jj}$ with breakdown of associated uncertainties.

Statistical correlation between bins of the differential cross-section measurements of EW $Zjj$ production in the signal region ($N^\mathrm{gap}_\mathrm{jets} = 0$, $\xi_Z < 0.5$). The associated measured central values, statistical uncertainty magnitude and bin ranges are presented in Tables 1-4. The bins are presented in order such that for example mjj_bin_1 spans $m_{jj} \in (1000,1500)$ GeV (see Table 1), while pT_ll_bin7 spans $p_\mathrm{T}^{ll} \in (200,275)$ GeV (see Table 3).

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the hadronic pseudo-top-quark $|y(\hat{t}_{\mathrm{h}})|$ in the electron channel. The results shown in this table are one of the inputs for the combined results.

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the leptonic pseudo-top-quark $p_{\mathrm{T}}(\hat{t}_{\mathrm{l}})$ in the muon channel. The results shown in this table are one of the inputs for the combined results.

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the leptonic pseudo-top-quark $p_{\mathrm{T}}(\hat{t}_{\mathrm{l}})$ in the electron channel. The results shown in this table are one of the inputs for the combined results.

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the leptonic pseudo-top-quark $|y(\hat{t}_{\mathrm{l}})|$ in the muon channel. The results shown in this table are one of the inputs for the combined results.

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the leptonic pseudo-top-quark $|y(\hat{t}_{\mathrm{l}})|$ in the electron channel. The results shown in this table are one of the inputs for the combined results.

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the pseudo-top-quark-pair $p_{\mathrm{T}}(\hat{t}_{\mathrm{l}}\hat{t}_{\mathrm{h}})$ in the muon channel.The results shown in this table are one of the inputs for the combined results.

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the pseudo-top-quark-pair $p_{\mathrm{T}}(\hat{t}_{\mathrm{l}}\hat{t}_{\mathrm{h}})$ in the electron channel. The results shown in this table are one of the inputs for the combined results.

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the pseudo-top-quark-pair $|y(\hat{t}_{\mathrm{l}}\hat{t}_{\mathrm{h}})|$ in the muon channel. The results shown in this table are one of the inputs for the combined results.

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the pseudo-top-quark-pair $|y(\hat{t}_{\mathrm{l}}\hat{t}_{\mathrm{h}})|$ in the electron channel. The results shown in this table are one of the inputs for the combined results.

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the pseudo-top-quark-pair $m(\hat{t}_{\mathrm{l}}\hat{t}_{\mathrm{h}})$ in the muon channel. The results shown in this table are one of the inputs for the combined results.

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the pseudo-top-quark-pair $m(\hat{t}_{\mathrm{l}}\hat{t}_{\mathrm{h}})$ in the electron channel. The results shown in this table are one of the inputs for the combined results.

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the hadronic pseudo-top-quark $p_{\mathrm{T}}(\hat{t}_{\mathrm{h}})$ after the electron and muon channel combination. The results shown in this table correspond to the results presented in figure 11(a).

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the hadronic pseudo-top-quark $|y(\hat{t}_{\mathrm{h}})|$ after the electron and muon channel combination. The results shown in this table correspond to the results presentedin figure 12(a).

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of theleptonic pseudo-top-quark $p_{\mathrm{T}}(\hat{t}_{\mathrm{l}})$ after the electron and muon channel combination.The results shown in this table correspond to the results presented in figure 11(b).

Measured $t\bar{t}$ differential cross-section and relative uncertaintyas a function of the leptonic pseudo-top-quark $|y(\hat{t}_{\mathrm{l}})|$ after the electron and muon channel combination.The results shown in this table correspond to the results presented in figure 12(b).

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function ofthe pseudo-top-quark-pair $p_{\mathrm{T}}(\hat{t}_{\mathrm{l}}\hat{t}_{\mathrm{h}})$ after the electron and muon channel combination.The results shown in this table correspond to the results presented in figure 13(a).

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the pseudo-top-quark-pair $|y(\hat{t}_{\mathrm{l}}\hat{t}_{\mathrm{h}})|$ after the electron and muon channel combination.The results shown in this table correspond to the results presented in figure 13(b).

Measured $t\bar{t}$ differential cross-section and relative uncertainty as a function of the pseudo-top-quark-pair $m(\hat{t}_{\mathrm{l}}\hat{t}_{\mathrm{h}})$after the electron and muon channel combination. The results shown in this table correspond to the results presented in figure 13(c).

Results of fit to DSIG/DPT**2 distribution of the form exp(-POWER*PT) in the PT range 0.8 to 2.4 GeV.

Definition of the fiducial phase space.

The seven input variables to the NN ordered by their discriminating power. The jet that is not $b$-tagged is referred to as $\textit{untagged}~$jet.

The seven input variables to the NN ordered by their discriminating power. The jet that is not $b$-tagged is referred to as $\textit{untagged}~$jet.

Event yields for the different processes estimated with the fit to the $O_\mathrm{NN}$ distribution compared to the numbers of observed events. Only the statistical uncertainties are quoted. The $Z,VV+\mathrm{jets}$ contributions and the multijet background are fixed in the fit; therefore no uncertainty is quoted for these processes.

Event yields for the different processes estimated with the fit to the $O_\mathrm{NN}$ distribution compared to the numbers of observed events. Only the statistical uncertainties are quoted. The $Z,VV+\mathrm{jets}$ contributions and the multijet background are fixed in the fit; therefore no uncertainty is quoted for these processes.

Detailed list of the contribution from each source of uncertainty to the total uncertainty in the measured values of $\sigma_{\mathrm{fid}}(tq)$ and $\sigma_{\mathrm{fid}}(\bar tq)$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3\%$. Uncertainties contributing less than $0.5\%$ are marked with ‘<0.5’.

Detailed list of the contribution from each source of uncertainty to the total uncertainty in the measured values of $\sigma_{\mathrm{fid}}(tq)$ and $\sigma_{\mathrm{fid}}(\bar tq)$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3\%$. Uncertainties contributing less than $0.5\%$ are marked with ‘<0.5’.

Significant contributions to the total relative uncertainty in the measured value of $R_{t}$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3~\%$. Uncertainties contributing less than $0.5~\%$ are not shown.

Significant contributions to the total relative uncertainty in the measured value of $R_{t}$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3~\%$. Uncertainties contributing less than $0.5~\%$ are not shown.

Slopes $a$ of the mass dependence of the measured cross$-$sections.

Slopes $a$ of the mass dependence of the measured cross$-$sections.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the neural network discriminant, $O_{\mathrm{NN}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the neural network discriminant, $O_{\mathrm{NN}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the second neural network discriminant, $O_{\mathrm{NN2}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the second neural network discriminant, $O_{\mathrm{NN2}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Migration matrix for $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $p_{\mathrm{T}}(t)$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $p_{\mathrm{T}}(t)$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(\hat{t\hspace{-0.2mm}})|$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(\hat{t\hspace{-0.2mm}})|$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(t)|$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(t)|$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Uncertainties in the normalisations of the different backgrounds for all processes, as derived from the total cross-section measurement.

Uncertainties in the normalisations of the different backgrounds for all processes, as derived from the total cross-section measurement.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events(at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-quark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.

Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-antiquark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.

Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the normalised differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the absolute differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$.

Uncertainties for the normalised differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Differential cross-section $\mathrm{d} \sigma ( pp \to ( \Upsilon \to \mu^+ \mu^- ) X ) / \mathrm{d}p_T$ [pb/(GeV/$c$)] for $2.0 < y < 4.5$.

Differential cross-section $\mathrm{d} \sigma ( pp \to ( \Upsilon \to \mu^+ \mu^- ) X ) / \mathrm{d}y$ [pb] for $p_T < 30$ GeV.

Ratio of double-differential cross-sections $( \mathrm{d}^2 \sigma ( pp \to ( \Upsilon(2S) \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d} y ) / ( \mathrm{d}^2 \sigma ( pp \to ( \Upsilon(1S) \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d} y )$.

Ratio of double-differential cross-sections $( \mathrm{d}^2 \sigma ( pp \to ( \Upsilon(3S) \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d} y ) / ( \mathrm{d}^2 \sigma ( pp \to ( \Upsilon(1S) \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d} y )$.

Ratio of double-differential cross-sections $( \mathrm{d}^2 \sigma ( pp \to ( \Upsilon(3S) \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d} y ) / ( \mathrm{d}^2 \sigma ( pp \to ( \Upsilon(2S) \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d} y )$.

The ratio of differential cross-sections $( \mathrm{d} \sigma ( pp \to ( \Upsilon(iS) \to \mu^+ \mu^- ) X ) / \mathrm{d}p_T ) / ( \mathrm{d} \sigma ( pp \to ( \Upsilon(jS) \to \mu^+ \mu^- ) X ) / \mathrm{d}p_T )$ for $2.0 < y < 4.5$.

The ratio of differential cross-sections $( \mathrm{d} \sigma ( pp \to ( \Upsilon(iS) \to \mu^+ \mu^- ) X ) / \mathrm{d}y ) / ( \mathrm{d} \sigma ( pp \to ( \Upsilon(jS) \to \mu^+ \mu^- ) X ) / \mathrm{d}y )$ for $p_T < 30$ GeV/$c$.

Double-differential cross-section $\mathrm{d}^2 \sigma ( pp \to ( \Upsilon \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d}y$ [pb/(GeV/$c$)].

Double-differential cross-section $\mathrm{d}^2 \sigma ( pp \to ( \Upsilon \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d}y$ [pb/(GeV/$c$)].

Double-differential cross-section $\mathrm{d}^2 \sigma ( pp \to ( \Upsilon \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d}y$ [pb/(GeV/$c$)].

Differential cross-section $\mathrm{d} \sigma ( pp \to ( \Upsilon \to \mu^+ \mu^- ) X ) / \mathrm{d}p_T$ [pb/(GeV/$c$)] for $2.0 < y < 4.5$.

Differential cross-section $\mathrm{d} \sigma ( pp \to ( \Upsilon \to \mu^+ \mu^- ) X ) / \mathrm{d}y$ [pb] for $p_T < 30$ GeV.

Ratio of double-differential cross-sections $( \mathrm{d}^2 \sigma ( pp \to ( \Upsilon(2S) \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d} y ) / ( \mathrm{d}^2 \sigma ( pp \to ( \Upsilon(1S) \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d} y )$.

Ratio of double-differential cross-sections $( \mathrm{d}^2 \sigma ( pp \to ( \Upsilon(3S) \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d} y ) / ( \mathrm{d}^2 \sigma ( pp \to ( \Upsilon(1S) \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d} y )$.

Ratio of double-differential cross-sections $( \mathrm{d}^2 \sigma ( pp \to ( \Upsilon(3S) \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d} y ) / ( \mathrm{d}^2 \sigma ( pp \to ( \Upsilon(2S) \to \mu^+ \mu^- ) X ) / \mathrm{d} p_T/\mathrm{d} y )$.

The ratio of differential cross-sections $( \mathrm{d} \sigma ( pp \to ( \Upsilon(iS) \to \mu^+ \mu^- ) X ) / \mathrm{d}p_T ) / ( \mathrm{d} \sigma ( pp \to ( \Upsilon(jS) \to \mu^+ \mu^- ) X ) / \mathrm{d}p_T )$ for $2.0 < y < 4.5$.

The ratio of differential cross-sections $( \mathrm{d} \sigma ( pp \to ( \Upsilon(iS) \to \mu^+ \mu^- ) X ) / \mathrm{d}y ) / ( \mathrm{d} \sigma ( pp \to ( \Upsilon(jS) \to \mu^+ \mu^- ) X ) / \mathrm{d}y )$ for $p_T < 30$ GeV/$c$.

The ratio of differential cross-section $\mathrm{d} \sigma ( pp \to ( \Upsilon \to \mu^+ \mu^- ) X ) / \mathrm{d}p_T$ [pb/(GeV/$c$)] for $\sqrt{s}=8$ and $\sqrt{s}=7$ TeV in $2.0 < y < 4.5$.

The ratio of differential cross-section $\mathrm{d} \sigma ( pp \to ( \Upsilon \to \mu^+ \mu^- ) X ) / \mathrm{d}y$ for $\sqrt{s}=8$ and $\sqrt{s}=7$ TeV and $p_T < 30$ GeV/$c$.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $467 < m^{\gamma-\rm jet1} < 510$ GeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $510 < m^{\gamma-\rm jet1} < 590$ GeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $590 < m^{\gamma-\rm jet1} < 670$ GeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $670 < m^{\gamma-\rm jet1} < 760$ GeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $760 < m^{\gamma-\rm jet1} < 850$ GeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $850 < m^{\gamma-\rm jet1} < 950$ GeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $0.95 < m^{\gamma-\rm jet1} < 1.05$ TeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $1.05 < m^{\gamma-\rm jet1} < 1.25$ TeV.

Measured cross sections for isolated-photon plus 1jet production as a function of $|\cos\theta^{\star}|$ for the range $1.25 < m^{\gamma-\rm jet1} < 2.45$ TeV.

Measured cross sections for isolated-photon plus 2jet production as a function of $E_{\rm T}^{\gamma}$.

Measured cross sections for isolated-photon plus 2jet production as a function of $p_{\rm T}^{\rm jet2}$.

Measured cross sections for isolated-photon plus 2jet production as a function of $\Delta\phi^{\rm \gamma-jet2}$.

Measured cross sections for isolated-photon plus 2jet production as a function of $\Delta\phi^{\rm jet1-jet2}$.

Measured cross sections for isolated-photon plus 2jet production as a function of $\Delta\phi^{\rm \gamma-jet2}$ for the range $130< E_{\rm T}^{\gamma} <300$ GeV.

Measured cross sections for isolated-photon plus 2jet production as a function of $\Delta\phi^{\rm \gamma-jet2}$ for the range $E_{\rm T}^{\gamma} >300$ GeV.

Measured cross sections for isolated-photon plus 2jet production as a function of $\Delta\phi^{\rm jet1-jet2}$ for the range $130< E_{\rm T}^{\gamma} <300$ GeV.

Measured cross sections for isolated-photon plus 2jet production as a function of $\Delta\phi^{\rm jet1-jet2}$ for the range $E_{\rm T}^{\gamma} >300$ GeV.

Measured cross sections for isolated-photon plus 2jet production as a function of $\beta^{\rm jet1}$.

Measured cross sections for isolated-photon plus 2jet production as a function of $\beta^{\gamma}$.

Ratio of measured cross sections for isolated-photon plus 2jet production as a function of $\beta$.

Measured cross sections for isolated-photon plus 3jet production as a function of $E_{\rm T}^{\gamma}$.

Measured cross sections for isolated-photon plus 3jet production as a function of $p_{\rm T}^{\rm jet3}$.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm \gamma-jet3}$.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm jet1-jet3}$.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm jet2-jet3}$.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm \gamma-jet3}$ for the range $130< E_{\rm T}^{\gamma} <300$ GeV.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm \gamma-jet3}$ for the range $E_{\rm T}^{\gamma} >300$ GeV.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm jet1-jet3}$ for the range $130< E_{\rm T}^{\gamma} <300$ GeV.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm jet1-jet3}$ for the range $E_{\rm T}^{\gamma} >300$ GeV.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm jet2-jet3}$ for the range $130< E_{\rm T}^{\gamma} <300$ GeV.

Measured cross sections for isolated-photon plus 3jet production as a function of $\Delta\phi^{\rm jet2-jet3}$ for the range $E_{\rm T}^{\gamma} >300$ GeV.