Showing 10 of 120 results
A search for pair production of squarks or gluinos decaying via sleptons or weak bosons is reported. The search targets a final state with exactly two leptons with same-sign electric charge or at least three leptons without any charge requirement. The analysed data set corresponds to an integrated luminosity of 139 fb$^{-1}$ of proton$-$proton collisions collected at a centre-of-mass energy of 13 TeV with the ATLAS detector at the LHC. Multiple signal regions are defined, targeting several SUSY simplified models yielding the desired final states. A single control region is used to constrain the normalisation of the $WZ$+jets background. No significant excess of events over the Standard Model expectation is observed. The results are interpreted in the context of several supersymmetric models featuring R-parity conservation or R-parity violation, yielding exclusion limits surpassing those from previous searches. In models considering gluino (squark) pair production, gluino (squark) masses up to 2.2 (1.7) TeV are excluded at 95% confidence level.
A search for supersymmetry targeting the direct production of winos and higgsinos is conducted in final states with either two leptons ($e$ or $\mu$) with the same electric charge, or three leptons. The analysis uses 139 fb$^{-1}$ of $pp$ collision data at $\sqrt{s}=13$ TeV collected with the ATLAS detector during Run 2 of the Large Hadron Collider. No significant excess over the Standard Model expectation is observed. Simplified and complete models with and without $R$-parity conservation are considered. In topologies with intermediate states including either $Wh$ or $WZ$ pairs, wino masses up to 525 GeV and 250 GeV are excluded, respectively, for a bino of vanishing mass. Higgsino masses smaller than 440 GeV are excluded in a natural $R$-parity-violating model with bilinear terms. Upper limits on the production cross section of generic events beyond the Standard Model as low as 40 ab are obtained in signal regions optimised for these models and also for an $R$-parity-violating scenario with baryon-number-violating higgsino decays into top quarks and jets. The analysis significantly improves sensitivity to supersymmetric models and other processes beyond the Standard Model that may contribute to the considered final states.
The associated production of a Higgs boson and a top-quark pair is measured in events characterised by the presence of one or two electrons or muons. The Higgs boson decay into a $b$-quark pair is used. The analysed data, corresponding to an integrated luminosity of 139 fb$^{-1}$, were collected in proton-proton collisions at the Large Hadron Collider between 2015 and 2018 at a centre-of-mass energy of $\sqrt{s}=13$ TeV. The measured signal strength, defined as the ratio of the measured signal yield to that predicted by the Standard Model, is $0.35^{+0.36}_{-0.34}$. This result is compatible with the Standard Model prediction and corresponds to an observed (expected) significance of 1.0 (2.7) standard deviations. The signal strength is also measured differentially in bins of the Higgs boson transverse momentum in the simplified template cross-section framework, including a bin for specially selected boosted Higgs bosons with transverse momentum above 300 GeV.
The production cross section of a top quark pair in association with a photon is measured in proton-proton collisions at a center-of-mass energy of 13 TeV. The data set, corresponding to an integrated luminosity of 137 fb$^{-1}$, was recorded by the CMS experiment during the 2016-2018 data taking of the LHC. The measurements are performed in a fiducial volume defined at the particle level. Events with an isolated, highly energetic lepton, at least three jets from the hadronization of quarks, among which at least one is b tagged, and one isolated photon are selected. The inclusive fiducial $\mathrm{t\overline{t}}\gamma$ cross section, for a photon with transverse momentum greater than 20 GeV and pseudorapidity $\lvert \eta\rvert$$\lt$ 1.4442, is measured to be 798 $\pm$ 7 (stat) $\pm$ 48 (syst) fb, in good agreement with the prediction from the standard model at next-to-leading order in quantum chromodynamics. The differential cross sections are also measured as a function of several kinematic observables and interpreted in the framework of the standard model effective field theory (EFT), leading to the most stringent direct limits to date on anomalous electromagnetic dipole moment interactions of the top quark and the photon.
Distribution of $p_{T}(\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $p_{T}(\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $m_{T}(W)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $m_{T}(W)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $M_{3}$ in the $N_{jet}\geq 3$ signal region.
Distribution of $M_{3}$ in the $N_{jet}\geq 3$ signal region.
Distribution of $m(l,\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $m(l,\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $\Delta R(l,\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $\Delta R(l,\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $\Delta R(j,\gamma)$ in the $N_{jet}\geq 3$ signal region.
Distribution of $\Delta R(j,\gamma)$ in the $N_{jet}\geq 3$ signal region.
Fit result of the multijet template obtained with loosely isolated leptons and the electroweak background to the measured $m_{T}(W)$ distribution with isolated leptons in the $N_{jet}=2$, $N_{b jet}=0$ selection for electrons.
Fit result of the multijet template obtained with loosely isolated leptons and the electroweak background to the measured $m_{T}(W)$ distribution with isolated leptons in the $N_{jet}=2$, $N_{b jet}=0$ selection for electrons.
Fit result of the multijet template obtained with loosely isolated leptons and the electroweak background to the measured $m_{T}(W)$ distribution with isolated leptons in the $N_{jet}=2$, $N_{b jet}=0$ selection for muons.
Fit result of the multijet template obtained with loosely isolated leptons and the electroweak background to the measured $m_{T}(W)$ distribution with isolated leptons in the $N_{jet}=2$, $N_{b jet}=0$ selection for muons.
Distribution of the invariant mass of the lepton and the photon ($m(l,\gamma)$) in the $N_{jet}\geq 3$, $N_{b jet}=0$ selection for the e channel.
Distribution of the invariant mass of the lepton and the photon ($m(l,\gamma)$) in the $N_{jet}\geq 3$, $N_{b jet}=0$ selection for the e channel.
Distribution of the invariant mass of the lepton and the photon ($m(l,\gamma)$) in the $N_{jet}\geq 3$, $N_{b jet}=0$ selection for the $\mu$ channel.
Distribution of the invariant mass of the lepton and the photon ($m(l,\gamma)$) in the $N_{jet}\geq 3$, $N_{b jet}=0$ selection for the $\mu$ channel.
Extracted scale factors for the contribution from misidentified electrons for the three data-taking periods, and the Z$\gamma$, W$\gamma$ simulations.
Extracted scale factors for the contribution from misidentified electrons for the three data-taking periods, and the Z$\gamma$, W$\gamma$ simulations.
Predicted and observed yields in the control regions in the $N_{jet}= 3$ and $\geq 4$ seletions using the post-fit values of the nuisance parameters.
Predicted and observed yields in the control regions in the $N_{jet}= 3$ and $\geq 4$ seletions using the post-fit values of the nuisance parameters.
Predicted and observed yields in the signal regions in the $N_{jet}= 3$ and $\geq 4$ seletions using the post-fit values of the nuisance parameters.
Predicted and observed yields in the signal regions in the $N_{jet}= 3$ and $\geq 4$ seletions using the post-fit values of the nuisance parameters.
The measured inclusive ttgamma cross section in the fiducial phase space compared to the prediction from simulation using Madgraph_aMC@NLO at a center-of-mass energy of 13 TeV.
The measured inclusive ttgamma cross section in the fiducial phase space compared to the prediction from simulation using Madgraph_aMC@NLO at a center-of-mass energy of 13 TeV.
Summary of the measured cross section ratios with respect to the NLO cross section prediction for signal regions binned in the electron channel, muon channel and the combined single lepton measurement.
Summary of the measured cross section ratios with respect to the NLO cross section prediction for signal regions binned in the electron channel, muon channel and the combined single lepton measurement.
The unfolded differential cross sections for $p_{T}(\gamma)$ and the comparison to simulations.
The unfolded differential cross sections for $p_{T}(\gamma)$ and the comparison to simulations.
The unfolded differential cross sections for $|\eta(\gamma)|$ and the comparison to simulations.
The unfolded differential cross sections for $|\eta(\gamma)|$ and the comparison to simulations.
The unfolded differential cross sections for $\Delta R(l,\gamma)$ and the comparison to simulations.
The unfolded differential cross sections for $\Delta R(l,\gamma)$ and the comparison to simulations.
The covariance matrix of systematic uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The covariance matrix of systematic uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The covariance matrix of systematic uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The covariance matrix of systematic uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The covariance matrix of systematic uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The covariance matrix of systematic uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The covariance matrix of statistic uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The covariance matrix of statistic uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The covariance matrix of statistic uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The covariance matrix of statistic uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The covariance matrix of statistic uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The covariance matrix of statistic uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The correlation matrix of statistical uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The correlation matrix of statistical uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The correlation matrix of statistical uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The correlation matrix of statistical uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The correlation matrix of statistical uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The correlation matrix of statistical uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The correlation matrix of systematic uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The correlation matrix of systematic uncertainties for the unfolded differential measurement for $p_{T}(\gamma)$.
The correlation matrix of systematic uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The correlation matrix of systematic uncertainties for the unfolded differential measurement for $|\eta(\gamma)|$.
The correlation matrix of systematic uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
The correlation matrix of systematic uncertainties for the unfolded differential measurement for $\Delta R(l,\gamma)$.
Summary of the one-dimensional intervals at 68 and 95% CL.
Summary of the one-dimensional intervals at 68 and 95% CL.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR3 signal region for the electron channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR3 signal region for the electron channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR3 signal region for the muon channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR3 signal region for the muon channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR4p signal region for the electron channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR4p signal region for the electron channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR4p signal region for the muon channel.
The observed and predicted post-fit yields for the combined Run 2 data set in the SR4p signal region for the muon channel.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional profiled scan for the Wilson coefficient $c_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional profiled scan for the Wilson coefficient $c_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional profiled scan for the Wilson coefficient $c^{I}_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional profiled scan for the Wilson coefficient $c^{I}_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional scan for the Wilson coefficient $c_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional scan for the Wilson coefficient $c_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional scan for the Wilson coefficient $c^{I}_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the one-dimensional scan for the Wilson coefficient $c^{I}_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the two-dimensional scan for the Wilson coefficients $c_{tZ}$ and $c^{I}_{tZ}$.
Negative log-likelihood ratio values with respect to the best fit value of the two-dimensional scan for the Wilson coefficients $c_{tZ}$ and $c^{I}_{tZ}$.
The results of a search for gluino and squark pair production with the pairs decaying via the lightest charginos into a final state consisting of two $W$ bosons, the lightest neutralinos ($\tilde\chi^0_1$), and quarks, are presented. The signal is characterised by the presence of a single charged lepton ($e^{\pm}$ or $\mu^{\pm}$) from a $W$ boson decay, jets, and missing transverse momentum. The analysis is performed using 139 fb$^{-1}$ of proton-proton collision data taken at a centre-of-mass energy $\sqrt{s}=13$ TeV delivered by the Large Hadron Collider and recorded by the ATLAS experiment. No statistically significant excess of events above the Standard Model expectation is found. Limits are set on the direct production of squarks and gluinos in simplified models. Masses of gluino (squark) up to 2.2 TeV (1.4 TeV) are excluded at 95% confidence level for a light $\tilde\chi^0_1$.
Post-fit $m_{T}$ distribution in the SR 2J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 2J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 4J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-veto N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{T}$ distribution in the SR 6J b-tag N-1 region. N-1 refers to all cuts except for the requirement on $m_T$ being applied. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Pre-fit $m_{eff}$ distribution in the TR6J control region. Uncertainties include statistical and systematic uncertainties (added in quadrature). The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Pre-fit $m_{eff}$ distribution in the WR6J control region. Uncertainties include statistical and systematic uncertainties (added in quadrature). The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the TR6J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the WR6J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 2J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J low-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 4J high-x b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step x = 1/2 model.
Post-fit $m_{eff}$ distribution in the 4J high-x b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Expected 95% CL exclusion contours for the gluino one-step x = 1/2 model. space.
Post-fit $m_{eff}$ distribution in the 6J b-tag signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Observed 95% CL exclusion contours for the gluino one-step variable-x
Post-fit $m_{eff}$ distribution in the 6J b-veto signal region. Uncertainties include statistical and systematic uncertainties. Including exemplary signal points. The value 9999 is used as a placeholder for infinity.
Expected 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for the gluino one-step x = 1/2 model.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the gluino one-step x = 1/2 model. space.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Observed 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the gluino one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-step variable-x
Observed 95% CL exclusion contours for the squark one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-step variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Observed 95% CL exclusion contours for one-flavour schemes in one-step x = 1/2 model.
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Expected 95% CL exclusion contours for the squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step x = 1/2
Expected 95% CL exclusion contours for the squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step variable-x
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Upper limits on the signal cross section for simplified model squark one-step x = 1/2
Expected 95% CL exclusion contours for the squark one-flavour schemes in variable-x
Upper limits on the signal cross section for simplified model squark one-step variable-x
Upper limits on the signal cross section for simplified model gluino one-step x = 1/2
Upper limits on the signal cross section for simplified model squark one-step x=1/2 in one-flavour schemes
Upper limits on the signal cross section for simplified model gluino one-step variable-x
Upper limits on the signal cross section for simplified model squark one-step variable-x in one-flavour schemes
Upper limits on the signal cross section for simplified model squark one-step x = 1/2
Post-fit $m_{eff}$ distribution in the 2J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step variable-x
Post-fit $m_{eff}$ distribution in the 2J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step x=1/2 in one-flavour schemes
Post-fit $m_{eff}$ distribution in the 4J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Upper limits on the signal cross section for simplified model squark one-step variable-x in one-flavour schemes
Post-fit $m_{eff}$ distribution in the 4J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the TR2J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-tag validation region. Uncertainties include statistical and systematic uncertainties.
Post-fit $m_{eff}$ distribution in the WR2J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Post-fit $m_{eff}$ distribution in the 6J b-veto validation region. Uncertainties include statistical and systematic uncertainties.
Post-fit $m_{eff}$ distribution in the TR4J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR2JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the WR4J control region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR2JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 2J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR4JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 2J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR4JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 4J b-tag validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR6JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 4J b-veto validation region. Uncertainties include statistical and systematic uncertainties. The value 9999 is used as a placeholder for infinity.
Event selection cutflow for two representative signal samples for the SR6JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Post-fit $m_{eff}$ distribution in the 6J b-tag validation region. Uncertainties include statistical and systematic uncertainties.
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Post-fit $m_{eff}$ distribution in the 6J b-veto validation region. Uncertainties include statistical and systematic uncertainties.
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR2JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR2JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR4JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR4JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR6JBT. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J discovery high region for gluino production one-step x = 1/2 simplified models
Event selection cutflow for two representative signal samples for the SR6JBV. The gluino, squark, chargino and neutralino masses are reported. Weighted events including statistical uncertainties are shown.
Signal acceptance in SR2J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for gluino production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for gluino production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery high region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR6J discovery low region for squark production one-step x = 1/2 simplified models
Signal acceptance in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR2J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR2J discovery low region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx discovery region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery high region for squark production one-step variable-x simplified models
Signal acceptance in SR6J discovery low region for squark production one-step variable-x simplified models
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for gluino production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step x = 1/2 simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR2J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jhx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx discovery region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR4Jlx b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Tag bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin1 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin2 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin3 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J b-Veto bin4 region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery high region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
Signal efficiency in SR6J discovery low region for squark production one-step variable-x simplified models. The -1 value indicates the truth yields for this point is 0 but the reco yields is not 0
A search for heavy neutral Higgs bosons is performed using the LHC Run 2 data, corresponding to an integrated luminosity of 139 fb$^{-1}$ of proton-proton collisions at $\sqrt{s}=13$ TeV recorded with the ATLAS detector. The search for heavy resonances is performed over the mass range 0.2-2.5 TeV for the $\tau^+\tau^-$ decay with at least one $\tau$-lepton decaying into final states with hadrons. The data are in good agreement with the background prediction of the Standard Model. In the $M_{h}^{125}$ scenario of the Minimal Supersymmetric Standard Model, values of $\tan\beta>8$ and $\tan\beta>21$ are excluded at the 95% confidence level for neutral Higgs boson masses of 1.0 TeV and 1.5 TeV, respectively, where $\tan\beta$ is the ratio of the vacuum expectation values of the two Higgs doublets.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table.The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 1l1tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-veto category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and predicted mTtot distribution in the b-tag category of the 2tau_h channel. Please note that the bin content is divided by the bin width in the paper figure, but not in the HepData table. The last bin includes overflows. The combined prediction for A and H bosons with masses of 400, 1000 and 1500 GeV and $\tan\beta$ = 6, 12 and 25 respectively in the mh125 scenario are also provided. The combined prediction for A and H bosons with masses of 1000 and 1500 GeV is scaled by 100 in the paper figure, but not in the HepData table.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the gluon-gluon fusion Higgs boson production cross section times ditau branching fraction as a function of the Higgs boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
Observed and expected 95% CL upper limits on the b-associated Higgs boson production cross section times ditau branching fraction as a function of the boson mass.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered for the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. No theoretical uncertainty is considered when computing these limits.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by gluon-gluon fusion as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Acceptance times efficiency for a scalar boson produced by b-associated production as a function of the scalar boson mass.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Observed 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Expected 95% CL upper limits on the scalar boson production cross section times ditau branching fraction as a function of the scalar boson mass and the fraction of the b-associated production. The limits are calculated from a statistical combination of the 1l1tau_h and 2tau_h channels.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Observed two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 250 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 300 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 350 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 400 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 600 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 700 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 800 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1200 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 1500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2000 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
Expected two dimensional likelihood scan of the gluon-gluon fusion cross section times branching fraction, $\sigma(gg\phi)\times B(\phi\to\tau\tau)$, vs the b-associated production times branching fraction, $\sigma(bb\phi)\times B(\phi\to\tau\tau)$ for the scalar boson mass ($m_\phi$) indicated in the table. For each mass, 10000 points are scanned. At each point $\Delta(\mathrm{NLL})$ is calculated, defined as the negative-log-likelihood (NLL) of the conditional fit with $\sigma(gg\phi)$ and $\sigma(bb\phi)$ fixed to their values at the point and with the minimum NLL value at any point subtracted. The best-fit point and the preferred 68% and 95% boundaries are found at $2\Delta(\mathrm{NLL})$ values of 0.0, 2.30 and 5.90, respectively. The value of $2\Delta(\mathrm{NLL})$ for 2500 GeV signal mass point is shown in the HEPData table.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the hMSSM scenario. The lowest value of $\tan\beta$ considered by the hMSSM scenario is 0.8 and the highest value of mass is 2 TeV. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\chi})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\chi})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(\widetilde{\tau})$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(\widetilde{\tau})$ scenario is 0.5. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The range of $\tan\beta$ shown in the paper figure and the HEPData is from 1 to 60. The theoretical uncertainty of signal cross section is considered.
The observed 95% CL upper limits with one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus one sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with plus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
The expected 95% CL upper limits with minus two sigma on $\tan\beta$ as a function of $m_{A}$ in the $M_{h}^{125}(alignment)$ scenario. The lowest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 1.0. The highest value of $\tan\beta$ considered by the $M_{h}^{125}(alignment)$ scenario is 20.0. The points in the region which is called "Not applicable" in the paper figure are kept in the HEPData table. Linear connection is applied in the range of signal mass points from 400 to 1000 GeV in the paper figure. The theoretical uncertainty of signal cross section is considered.
A search for supersymmetric partners of gluons and quarks is presented, involving signatures with jets and either two isolated leptons (electrons or muons) with the same electric charge, or at least three isolated leptons. A data sample of proton-proton collisions at $\sqrt{s}$ = 13 TeV recorded with the ATLAS detector at the Large Hadron Collider between 2015 and 2018, corresponding to a total integrated luminosity of 139 fb$^{-1}$, is used for the search. No significant excess over the Standard Model expectation is observed. The results are interpreted in simplified supersymmetric models featuring both R-parity conservation and R-parity violation, raising the exclusion limits beyond those of previous ATLAS searches to 1600 GeV for gluino masses and 750 GeV for bottom and top squark masses in these scenarios.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
Results on $\phi$ meson production in inelastic p+p collisions at CERN SPS energies are presented. They are derived from data collected by the NA61/SHINE fixed target experiment, by means of invariant mass spectra fits in the $\phi \to K^+K^-$ decay channel. They include the first ever measured double differential spectra of $\phi$ mesons as a function of rapidity $y$ and transverse momentum $p_T$ for proton beam momenta of 80 GeV/c and 158 GeV/c, as well as single differential spectra of $y$ or $p_T$ for beam momentum of 40 GeV/c. The corresponding total $\phi$ yields per inelastic p+p event are obtained. These results are compared with existing data on $\phi$ meson production in p+p collisions. The comparison shows consistency but superior accuracy of the present measurements. The emission of $\phi$ mesons in p+p reactions is confronted with that occurring in Pb+Pb collisions, and the experimental results are compared with model predictions. It appears that none of the considered models can properly describe all the experimental observables.
Measurements of the yield and nuclear modification factor, $R_\mathrm{ AA}$, for inclusive jet production are performed using 0.49 nb$^{-1}$ of Pb+Pb data at $\sqrt{s_\mathrm{NN}} = 5.02$ TeV and 25 pb$^{-1}$ of $pp$ data at $\sqrt{s}=5.02$ TeV with the ATLAS detector at the LHC. Jets are reconstructed with the anti-$k_t$ algorithm with radius parameter $R=0.4$ and are measured over the transverse momentum range of 40-1000 GeV in six rapidity intervals covering $|y|<2.8$. The magnitude of $R_\mathrm{ AA}$ increases with increasing jet transverse momentum, reaching a value of approximately 0.6 at 1 TeV in the most central collisions. The magnitude of $R_\mathrm{ AA}$ also increases towards peripheral collisions. The value of $R_\mathrm{ AA}$ is independent of rapidity at low jet transverse momenta, but it is observed to decrease with increasing rapidity at high transverse momenta.
The ⟨TAA⟩ and ⟨Npart⟩ values and their uncertainties in each centrality bin.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
No description provided.
A search for supersymmetric partners of top quarks decaying as $\tilde{t}_1\to c\tilde\chi^0_1$ and supersymmetric partners of charm quarks decaying as $\tilde{c}_1\to c\tilde\chi^0_1$, where $\tilde\chi^0_1$ is the lightest neutralino, is presented. The search uses 36.1 ${\rm fb}^{-1}$ $pp$ collision data at a centre-of-mass energy of 13 TeV collected by the ATLAS experiment at the Large Hadron Collider and is performed in final states with jets identified as containing charm hadrons. Assuming a 100% branching ratio to $c\tilde\chi^0_1$, top and charm squarks with masses up to 850 GeV are excluded at 95% confidence level for a massless lightest neutralino. For $m_{\tilde{t}_1,\tilde{c}_1}-m_{\tilde\chi^0_1}
Acceptance for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Acceptance for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR1 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR2 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR3 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR4 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for SR5 in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Detector efficiency for best expected CLS SR in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR1 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR2 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR3 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR4 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
SR5 observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for the best expected SR in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR1 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR1 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR1 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR2 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR2 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR2 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR3 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR3 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR3 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR4 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR4 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR4 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR5 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR5 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for SR5 in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for the best expected SR in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Upper limits on signal cross sections and exclusion limits at 95% CL for the best expected SR in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Minimum branching ratio excluded at 95% CL, assuming no sensitivity for other decay possibilities, in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Minimum branching ratio excluded at 95% CL, assuming no sensitivity for other decay possibilities, in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
Minimum branching ratio excluded at 95% CL, assuming no sensitivity for other decay possibilities, in the $m(\tilde t_1/\tilde c_1)$-$m(\tilde\chi^0_1)$ plane for the stop/scharm pair production scenario.
The signal region with the best expected CLS value for each signal in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
The signal region with the best expected CLS value for each signal in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
The signal region with the best expected CLS value for each signal in the $\tilde{t}_1/\tilde{c}_1-\tilde{\chi}_1^0$ mass plane.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Expected exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Observed exclusion limit at 95% CL in the $m(\tilde t_1/\tilde c_1)$-$\Delta m$ plane for the stop/scharm pair production scenario.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR1. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR1. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR1. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR2. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR2. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR2. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR3. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR3. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR3. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR4. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR4. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR4. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR5. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR5. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Comparison between data and expectation after the background-only fit for the $E_{T}^{miss}$ distribution in SR5. The shaded band indicates detector-related systematic uncertainties and the statistical uncertainties of the MC samples, while the error bars on the data points indicate the data's statistical uncertainty. The final bin in each histogram includes the overflow. The lower panel shows the ratio of the data to the SM prediction after the background-only fit. The distribution is also shown for a representative signal point.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (450,425)$ GeV signal point for signal region SR1.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (450,425)$ GeV signal point for signal region SR1.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (450,425)$ GeV signal point for signal region SR1.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,420)$ GeV signal point for signal region SR2.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,420)$ GeV signal point for signal region SR2.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,420)$ GeV signal point for signal region SR2.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,350)$ GeV signal point for signal region SR3.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,350)$ GeV signal point for signal region SR3.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (500,350)$ GeV signal point for signal region SR3.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (600,350)$ GeV signal point for signal region SR4.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (600,350)$ GeV signal point for signal region SR4.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (600,350)$ GeV signal point for signal region SR4.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (900,1)$ GeV signal point for signal region SR5.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (900,1)$ GeV signal point for signal region SR5.
Cutflow for the $(m_{\tilde{t}}, m_{\tilde{\chi}}) = (900,1)$ GeV signal point for signal region SR5.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But, sometimes you may wish to be more specific. Here we show you how.
Guidance and examples on the query string syntax can be found in the Elasticsearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.