Event yields for the different processes estimated with the fit to the $O_\mathrm{NN}$ distribution compared to the numbers of observed events. Only the statistical uncertainties are quoted. The $Z,VV+\mathrm{jets}$ contributions and the multijet background are fixed in the fit; therefore no uncertainty is quoted for these processes.

Detailed list of the contribution from each source of uncertainty to the total uncertainty in the measured values of $\sigma_{\mathrm{fid}}(tq)$ and $\sigma_{\mathrm{fid}}(\bar tq)$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3\%$. Uncertainties contributing less than $0.5\%$ are marked with ‘<0.5’.

Significant contributions to the total relative uncertainty in the measured value of $R_{t}$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3~\%$. Uncertainties contributing less than $0.5~\%$ are not shown.

Slopes $a$ of the mass dependence of the measured cross$-$sections.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the neural network discriminant, $O_{\mathrm{NN}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the second neural network discriminant, $O_{\mathrm{NN2}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Migration matrix for $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $p_{\mathrm{T}}(t)$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(\hat{t\hspace{-0.2mm}})|$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(t)|$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Uncertainties in the normalisations of the different backgrounds for all processes, as derived from the total cross-section measurement.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events(at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-quark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.

Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-antiquark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.

Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the normalised differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the absolute differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$.

Uncertainties for the normalised differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

The total inelastic cross section.

The measured differential elastic cross section. In addition to the statistical and total systematic uncertainties, the following 22 systematic shifts are given, which are included in the profile fit with their signs: -- Constraints: Beam optics uncertainty obtained by varying the ALFA constraints in the optics fit -- QScan: Variation by +/- 0.1 % of the quadrupole strength -- Q2: Fit of the strength of Q2 using the best value for the strength of Q1 and Q3 -- Q5Q6: Variation of the strength of Q5 and Q6 by -0.2% as indicated by machine constraints -- MadX: Uncertainty related to the beam transport replacing matrix transport by MadX PTC tracking -- Qmisal: Uncertainty due to the mis-alignment of the quadrupoles in the beam line -- Q1Q3: Propagation of the optics fit uncertainty in the strenght of Q1 and Q3 on the differential elastic cross section -- Aopt: Alignment uncertainty from the optimization procedure -- Offv: Alignment uncertainty related to the vertical beam center offset -- Offh: Alignment uncertainty related to the horizontal beam center offset -- Ang: Alignment uncertainty related to the detector rotation in the x-y plane -- BGn: Uncertainty from the background normalization -- BGs: Uncertainty from the background shape -- MCres: Error from modelling of the detector response -- Slope: Residual dependence on the physics model estimated by varying the nuclear slope in the simulation by +/- 1 GeV^-2 -- Emit: Uncertainty from the emittance used to calculate beam divergence in the simulation -- Unf: Unfolding uncertainty from the data-driven closure test -- Trac: Uncertainty from the variation of the track reconstruction selection cuts -- Xing: Uncertainty from residual crossing angle in the horizontal plane -- Eff: Uncertainty from the reconstruction efficiency -- Lumi: Luminosity uncertainty (+/- 1.5%) -- Ebeam: Uncertainty from the nominal beam energy (+/- 0.65%) Small differences in the values given here compared to the published version are related to insignificant rounding issues.

The statistical covariance matrix for the differential elastic cross section.

The total inelastic cross section, the first systematic error accounts for all experimental uncertainties and the second error for the extrapolation t-->0.

The measured differential elastic cross section. In addition to the statistical and total systematic uncertainties, the following 24 systematic shifts are given, which are included in the profile fit with their signs: -- Constraints: Beam optics uncertainty obtained by varying the ALFA constraints in the optics fit -- QScan: Variation by +/- 0.1 % of the quadrupole strength -- Q2: Fit of the strength of Q2 using the best value for the strength of Q1 and Q3 -- MadX: Uncertainty related to the beam transport replacing matrix transport by MadX PTC tracking -- Q5Q6: Variation of the strength of Q5 and Q6 by -0.2% as indicated by machine constraints -- Qmisal: Uncertainty due to the mis-alignment of the quadrupoles in the beam line -- Q1Q3: Propagation of the optics fit uncertainty in the strenght of Q1 and Q3 on the differential elastic cross section -- Stat2: Alignment uncertainty from the choice of a reference station -- Dist: Alignment uncertainty related to the distance calibration between the upper and lower detectors -- Leff: Alignment uncertainty related to effective lever arm used in the alignment optimization procedure -- Offv: Alignment uncertainty related to the vertical beam center offset -- Offh: Alignment uncertainty related to the horizontal beam center offset -- Ang: Alignment uncertainty related to the detector rotation in the x-y plane -- BGn: Uncertainty from the background normalization -- BGs: Uncertainty from the background shape -- MCres: Error from modelling of the detector response -- Slope: Residual dependence on the physics model estimated by varying the nuclear slope in the simulation by +/- 1 GeV^-2 -- Emit: Uncertainty from the emittance used to calculate beam divergence in the simulation -- Unf: Unfolding uncertainty from the data-driven closure test -- Trac: Uncertainty from the variation of the track reconstruction selection cuts -- Xing: Uncertainty from residual crossing angle in the horizontal plane -- Eff: Uncertainty from the reconstruction efficiency -- Lumi: Luminosity uncertainty (+/- 2.3%) -- Ebeam: Uncertainty from the nominal beam energy (+/- 0.65%) A small difference in the statistical uncertainties give here compared to the published version is related to insignificant rounding issues.

The statistical covariance matrix for the differential elastic cross section.

.

PT and XL parametrization from PL 263B, 573 and PRL 61, 2185 are used. This result includes an additional uncertainty of +-15%, corresponding to the differ ence between two parametrization and their uncertainties.

.

.

.

No description provided.

No description provided.

No description provided.

Fitted values of SLOPE of the form exp(-SLOPE*PT**2) to the PT**2 distributions.

Fitted values of SLOPE of the form exp(-SLOPE*PT**2) to the PT**2 distributions.

Fitted values of SLOPE of the form exp(-SLOPE*PT**2) to the PT**2 distributions.

Data requested from the authors.

CYCLE N2.

CYCLE N2.

CYCLE N2.

CYCLE N2.

No description provided.

CYCLE N2.

CYCLE N2.

CYCLE N2.

CYCLE N2.

CYCLE N2.

CYCLE N2.

CYCLE N2.

FOR AL, CU, PB, TARGETS HI2/D.O.F.=1,FOR BE TARGET HI2/D.O.F.=3.2.

FOR AL, CU, PB, TARGETS HI2/D.O.F.=1,FOR BE TARGET HI2/D.O.F.=3.2.

FOR AL, CU, PB, TARGETS HI2/D.O.F.=1,FOR BE TARGET HI2/D.O.F.=3.2.

No description provided.

No description provided.

No description provided.

No description provided.