The growth and development of “charged particle jets” produced in proton-antiproton collisions at 1.8 TeV are studied over a transverse momentum range from 0.5 GeV/c to 50 GeV/c. A variety of leading (highest transverse momentum) charged jet observables are compared with the QCD Monte Carlo models HERWIG, ISAJET, and PYTHIA. The models describe fairly well the multiplicity distribution of charged particles within the leading charged jet, the size of the leading charged jet, the radial distribution of charged particles and transverse momentum around the leading charged jet direction, and the momentum distribution of charged particles within the leading charged jet. The direction of the leading “charged particle jet” in each event is used to define three regions of η−φ space. The “toward” region contains the leading “charged particle jet,” while the “away” region, on the average, contains the away-side jet. The “transverse” region is perpendicular to the plane of the hard 2-to-2 scattering and is very sensitive to the “underlying event” component of the QCD Monte Carlo models. HERWIG, ISAJET, and PYTHIA with their default parameters do not describe correctly all the properties of the “transverse” region.
Average number of charged particles as a function of the relative azimuthal angle between the individual charged particle and the overall leading jet angle.
Average scalar PT sum of charged particles as a function of the relative azimuthal angle between the individual charged particle for 3 different lower limits of the leading jet PT. and the overall jet angle.
The average number of toward(DPHI < 60 DEG), transverse (DPHI 60 TO 120 DEG) and away (DPHI > 120 DEG) charged particles as a function of the PT of the leading charged jet. The data in this table are from the Min-Bias events.
We have made a precise measurement of the central inclusive jet cross section at sqrt(s) = 1.8 TeV. The measurement is based on an integrated luminosity of 92 pb-1 collected at the Fermilab Tevatron pbar-p Collider with the D-Zero detector. The cross section, reported as a function of jet transverse energy (ET >= 60 GeV) in the pseudorapidity interval |eta| <= 0.5, is in good agreement with predictions from next-to-leading order quantum chromodynamics.
Inclusive cross section for ABS(ETARAP)<0.5. The quoted systematic (DSYS) errors do not include the luminosity uncertainty of 6.1 PCT.
Inclusive cross section for 0.1<=ABS(ETARAP)<=0.7. Data are taken from the AIP E-PAPS ftp site shown above. The quoted (DSYS) errors are the total systematic errors including the luminosity uncertainty.
Bottom quark production in pbar-p collisions at sqrt(s)=1.8 TeV is studied with 5 inverse picobarns of data collected in 1995 by the DO detector at the Fermilab Tevatron Collider. The differential production cross section for b jets in the central rapidity region (|y(b)| < 1) as a function of jet transverse energy is extracted from a muon-tagged jet sample. Within experimental and theoretical uncertainties, DO results are found to be higher than, but compatible with, next-to-leading-order QCD predictions.
No description provided.
The DO Collaboration has measured the inclusive jet cross section in proton-antiproton collisions at s**2 = 630 GeV. The results for pseudorapidities -0.5 to 0.5 are combined with our previous results at s**2 = 1800 GeV to form a ratio of cross sections with smaller uncertainties than either individual measurement. Next-to-leading-order QCD predictions show excellent agreement with the measurement at 630 GeV; agreement is also satisfactory for the ratio. Specifically, despite a 10% to 15% difference in the absolute normalization, the dependence of the ratio on jet transverse momentum is very similar for data and theory.
Inclusive jet cross section at 630 GeV.
Ratio of cross section at 630 and 1800 GeV (from PRL 82, 2451 (1999)).
Results are presented from analyses of jet data produced in pbarp collisions at sqrt{s} = 630 and 1800 GeV collected with the DO detector during the 1994-95 Fermilab Tevatron Collider run. We discuss details of detector calibration, and jet selection criteria in measurements of various jet production cross sections at sqrt{s} = 630 and 1800 GeV. The inclusive jet cross sections, the dijet mass spectrum, the dijet angular distributions, and the ratio of inclusive jet cross sections at sqrt{s} = 630 and 1800 GeV are compared to next-to-leading-order QCD predictions. The order alpha_s^3 calculations are in good agreement with the data. We also use the data at sqrt{s} = 1800 GeV to rule out models of quark compositeness with a contact interaction scale less than 2.2 TeV at the 95% confidence level.
The inclusive single jet cross section as a function of ET for ABS(ETARAP) < 0.5 at c.m. energy 1800 GeV.
The inclusive single jet cross section as a function of ET for ABS(ETARAP) 0.1 to 0.7 at c.m. energy 1800 GeV.
The inclusive single jet cross section as a function of ET and XT for ABS(ETARAP) < 0.5 at c.m. energy 630 GeV.
We report a new measurement of the pseudorapidity (eta) and transverse-energy (Et) dependence of the inclusive jet production cross section in pbar b collisions at sqrt(s) = 1.8 TeV using 95 pb**-1 of data collected with the DZero detector at the Fermilab Tevatron. The differential cross section d^2sigma/dEt deta is presented up to |eta| = 3, significantly extending previous measurements. The results are in good overall agreement with next-to-leading order predictions from QCD and indicate a preference for certain parton distribution functions.
Single Inclusive Jet Production Cross Section.
Single Inclusive Jet Production Cross Section.
Single Inclusive Jet Production Cross Section.
We present a measurement of the inclusive jet cross section in p-pbar collisions at sqrt{s}=1.96 TeV based on data collected by the CDF II detector with an integrated luminosity of 1.13 fb^-1. The measurement was made using the cone-based Midpoint jet clustering algorithm in the rapidity region of |y|<2.1. The results are consistent with next-to-leading-order perturbative QCD predictions based on recent parton distribution functions (PDFs), and are expected to provide increased precision in PDFs at high parton momentum fraction x. The results are also compared to the recent inclusive jet cross section measurement using the k_T jet clustering algorithm, and we find that the ratio of the cross sections measured with the two algorithms is in agreement with theoretical expectations over a large range of jet transverse momentum and rapidity.
Measured inclusive jet cross section as a function of jet transverse momentum in the absolute rapidity region < 0.1. The bin-by-bin correction factors from parton to hadron-level are also tabulated.
Measured inclusive jet cross section as a function of jet transverse momentum in the absolute rapidity region 0.1 to 0.7. The bin-by-bin correction factors from parton to hadron-level are also tabulated.
Measured inclusive jet cross section as a function of jet transverse momentum in the absolute rapidity region 0.7 to 1.1. The bin-by-bin correction factors from parton to hadron-level are also tabulated.
We present a measurement of the shapes of b-jets using 300 pb-1 of data obtained with the upgraded Collider Detector at Fermilab (CDF II) in p pbar collisions at center of mass energy sqrt{s}=1.96 TeV. This measurement covers a wide transverse momentum range, from 52 to 300 GeV/c. Samples of heavy-flavor enhanced jets together with inclusive jets are used to extract the average shapes of b-jets. The b-jets are expected to be broader than inclusive jets. Moreover, b-jets containing a single b-quark are expected to be narrower than those containing a b bbar pair from gluon splitting. The measured b-jet shapes are found to be significantly broader than expected from the PYTHIA and HERWIG Monte Carlo simulations. This effect may arise from an underestimation of the fraction of b-jets originating from gluon splitting in these simulations.
Measured integrated jet shapes for b-jets as a function of the jet cone parameter R with R0=0.7, for jet PT from 52 to 80 GeV.
Measured integrated jet shapes for b-jets as a function of the jet cone parameter R with R0=0.7, for jet PT from 80 to 104 GeV.
Measured integrated jet shapes for b-jets as a function of the jet cone parameter R with R0=0.7, for jet PT from 104 to 142 GeV.
We report measurements of the inclusive transverse momentum pT distribution of centrally produced kshort, kstar(892), and phi(1020) mesons up to pT = 10 GeV/c in minimum-bias events, and kshort and lambda particles up to pT = 20 GeV/c in jets with transverse energy between 25 GeV and 160 GeV in pbar p collisions. The data were taken with the CDF II detector at the Fermilab Tevatron at sqrt(s) = 1.96 TeV. We find that as pT increases, the pT slopes of the three mesons (kshort, kstar, and phi) are similar, and the ratio of lambda to kshort as a function of pT in minimum-bias events becomes similar to the fairly constant ratio in jets at pT ~ 5 GeV/c. This suggests that the particles with pT >~ 5 GeV/c in minimum-bias events are from soft jets, and that the pT slope of particles in jets is insensitive to light quark flavor (u, d, or s) and to the number of valence quarks. We also find that for pT <~ 4 GeV relatively more lambda baryons are produced in minimum-bias events than in jets.
The inclusive invariant differential cross section for K0S production.
The inclusive invariant differential cross section for PHI production.
The inclusive invariant differential cross section for K*(892)+- production.
We report on measurements of the inclusive jet production cross section as a function of the jet transverse momentum in pp-bar collisions at sqrt{s} = 1.96 TeV}, using the k_T algorithm and a data sample corresponding to 1.0 fb^-1 collected with the Collider Detector at Fermilab in Run II. The measurements are carried out in five different jet rapidity regions with |yjet| < 2.1 and transverse momentum in the range 54 < \ptjet < 700 GeV/c. Next-to-leading order perturbative QCD predictions are in good agreement with the measured cross sections.
Measured inclusive jet differential cross section as a function of PT for the rapidity range -0.1 to 0.1 with the jet resolution parameter D = 0.7.
Measured inclusive jet differential cross section as a function of PT for the absoloute rapidity range 0.1 to 0.7 with the jet resolution parameter D = 0.7.
Measured inclusive jet differential cross section as a function of PT for the absolute rapidity range 0.7 to 1.1 with the jet resolution parameter D = 0.7.
Forum