Measurement of the anti-p p Total Cross-Section at s**(1/2) = 1.8-TeV

The E710 collaboration Amos, Norman A. ; Avila, C. ; Baker, W.F. ; et al.
Phys.Rev.Lett. 63 (1989) 2784, 1989.
Inspire Record 281851 DOI 10.17182/hepdata.19995

We have measured the antiproton-proton total cross section at √s =1.8 TeV at the Fermilab Tevatron Collider; the value obtained is 78.3±5.9 mb. B, the nuclear slope parameter for elastic scattering, was measured to be 16.3±0.5 (GeV/c)−2. From these data, we derive a value for the total elastic cross section.

4 data tables

Nuclear Store Parameter.

Total cross section measurement. Errors contain systematic effects folded including a 15 PCT error in luminosity measurement which dominates the error.

Total cross section assuming RHO = 0.145 (low energy fit). If RHO is taken as 0.24 obtained by UA4 at sqrt(s) = 546 GeV, the value of SIG is reduced by 1.8 PCT.

More…

A Luminosity Independent Measurement of the $\bar{p} p$ Total Cross-section at $\sqrt{s}=1$.8-tev

The E-710 collaboration Amos, Norman A. ; Avila, C. ; Baker, W.F. ; et al.
Phys.Lett.B 243 (1990) 158-164, 1990.
Inspire Record 27474 DOI 10.17182/hepdata.29696

We report a measurement of the p p total cross section at √ s =1.8 TeV using a luminosity-independent method. Our result is σ T =72.1±3.3 mb ; we also derive the total elastic cross section σ el =16.6±1.6 mb. A value is obtained for the total single diffraction cross section of 11.7±2.3 mb.

4 data tables

No description provided.

Assuming RHO = 0.145.

No description provided.

More…

W and Z boson production in p anti-p collisions at s**(1/2) = 1.8-TeV

The D0 collaboration Abachi, S. ; Abbott, B. ; Abolins, M. ; et al.
Phys.Rev.Lett. 75 (1995) 1456-1461, 1995.
Inspire Record 395459 DOI 10.17182/hepdata.42368

The inclusive cross sections times leptonic branching ratios for W and Z boson production in PbarP collisions at Sqrt(s)=1.8 TeV were measured using the D0 detector at the Fermilab Tevatron collider: Sigma_W*B(W->e, nu) = 2.36 +/- 0.07 +/- 0.13 nb, Sigma_W*B(W->mu,nu) = 2.09 +/- 0.23 +/- 0.11 nb, Sigma_Z*B(Z-> e, e) = 0.218 +/- 0.011 +/- 0.012 nb, Sigma_Z*B(Z->mu,mu) = 0.178 +/- 0.030 +/- 0.009 nb. The first error is the combined statistical and systematic uncertainty, and the second reflects the uncertainty in the luminosity. For the combined electron and muon analyses we find: [Sigma_W*B(W->l,nu)]/[Sigma_Z*B(Z->l,l)] = 10.90 +/- 0.49. Assuming Standard Model couplings, this result is used to determine the width of the W boson: Gamma(W) = 2.044 +/- 0.093 GeV.

1 data table

The second DSYS error is due to luminosity.


Top quark search with the D\O\ 1992 - 1993 data sample

The D0 collaboration Abachi, S. ; Abbott, B. ; Abolins, M. ; et al.
Phys.Rev.D 52 (1995) 4877-4919, 1995.
Inspire Record 398425 DOI 10.17182/hepdata.42468

We present results on the search for the top quark in pp¯ collisions at √s =1.8 TeV with an integrated luminosity of 13.5±1.6 pb−1. We have considered tt¯ production in the standard model using electron and muon dilepton decay channels (tt¯→eμ+jets, ee+jets, and μμ+jets) and single-lepton decay channels (tt¯→e+jets and μ+jets) with and without tagging of b quark jets. An analysis of these data optimized for top quark masses below 140 GeV/c2 gives a lower top quark mass limit of 128 GeV/c2. An analysis optimized for higher top quark masses yields 9 events with an expected background of 3.8±0.9. If we assume that the excess is due to tt¯ production, and assuming a top quark mass of 180 GeV/c2, we obtain a cross section of 8.2±5.1 pb.

1 data table

No description provided.


Inclusive muon and B quark production cross-sections in p anti-p collisions at s**(1/2) = 1.8-TeV

The D0 collaboration Abachi, S. ; Abbott, B. ; Abolins, M. ; et al.
(1995), 1995.
Inspire Record 398709 DOI 10.17182/hepdata.43027

We have calculated the double and triple differential cross sections for electron ejection with energy of 14.6 eV in single ionization of H2 by 75 keV proton impact. A molecular version of the continuum distorted wave-eikonal initial state approach is applied, where the interaction between the projectile and the residual molecular ion is considered more properly than in previous applications of the method. For triple differential cross sections, the present results are in better agreement with the experimental data than those of other descriptions when large momentum transfer values are considered. For double differential cross sections the experimental data are reproduced quite well for both coherent and incoherent proton beams.

2 data tables

No description provided.

No description provided.


Second generation leptoquark search in p anti-p collisions at S**(1/2) = 1.8-TeV

The D0 collaboration Abachi, S. ; Abbott, B. ; Abolins, M. ; et al.
Phys.Rev.Lett. 75 (1995) 3618-3623, 1995.
Inspire Record 397099 DOI 10.17182/hepdata.42373

We report on a search for second generation leptoquarks with the D\O\ detector at the Fermilab Tevatron $p\overline{p}$ collider at $\sqrt{s}$ = 1.8 TeV. This search is based on 12.7 pb$~{-1}$ of data. Second generation leptoquarks are assumed to be produced in pairs and to decay into a muon and quark with branching ratio $\beta$ or to neutrino and quark with branching ratio $(1-\beta)$. We obtain cross section times branching ratio limits as a function of leptoquark mass and set a lower limit on the leptoquark mass of 111 GeV/c$~{2}$ for $\beta = 1 $ and 89 GeV/c$~{2}$ for $\beta = 0.5 $ at the 95\%\ confidence level.

1 data table

The cross section times branching ratios.


Search for W boson pair production in p anti-p collisions at s**(1/2) = 1.8-TeV

The D0 collaboration Abachi, S. ; Abbott, B. ; Abolins, M. ; et al.
FERMILAB-CONF-95-242-E, 1995.
Inspire Record 398747 DOI 10.17182/hepdata.43019

None

1 data table

Upper limit at the 95% C.L.


J / psi production in p anti-p collisions at s**(1/2) = 1.8-TeV

The D0 collaboration Abachi, S. ; Abbott, B. ; Abolins, M. ; et al.
Phys.Lett.B 370 (1996) 239-248, 1996.
Inspire Record 415417 DOI 10.17182/hepdata.42319

We have studied J ψ production in p p collisions at s = 1.8 TeV with the DØ detector at Fermilab using μ + μ − data. We have measured the inclusive J ψ production cross section as a function of J ψ transverse momentum, p T . For the kinematic range p T > 8 GeV/ c and |η| < 0.6 we obtain σ(p p → J ψ + X) · Br ( J ψ → μ + μ − ) = 2.08 ± 0.17( stat) ± 0.46(syst) nb. Using the muon impact parameter we have estimated the fraction of J ψ mesons coming from B meson decays to be f b = 0.35 ± 0.09(stat)±0.10(syst) and inferred the inclusive b production cross section. From the information on the event topology the fraction of nonisolated J ψ events has been measured to be f nonisol = 0.64 ± 0.08(stat)±0.06(syst). We have also obtained the fraction of J ψ events resulting from radiative decays of χ c states, f χ = 0.32 ± 0.07(stat)±0.07(syst). We discuss the implications of our measurements for charmonium production processes.

5 data tables

No description provided.

No description provided.

Integrated b-quark production cross section.

More…

Search for additional neutral gauge bosons

The D0 collaboration Abachi, S. ; Abbott, B. ; Abolins, M. ; et al.
Phys.Lett.B 385 (1996) 471-478, 1996.
Inspire Record 421554 DOI 10.17182/hepdata.42253

We have searched for a heavy neutral gauge boson, Z ′, using the decay channel Z ′ → ee . The data were collected with the DØ detector at the Fermilab Tevatron during the 1992–1993 p p collider run at s =1.8 TeV from an integrated luminosity of 15±1 pb −1 . Limits are set on the cross section times brancing ratio for the process p p → Z′ → ee as a function of the Z ′ mass. We exclude the existence of a Z ′ of mass less than 490 GeV/c 2 , assuming a Z ′ with the same coupling strengths to quarks and leptons as the standard model Z boson.

1 data table

No description provided.


Results from a search for a neutral scalar produced in association with a W boson in p anti-p collisions at s**(1/2) = 1.8-TeV

The D0 collaboration Abachi, S. ; Abbott, B. ; Abolins, M. ; et al.
FERMILAB-CONF-96-258-E, 1996.
Inspire Record 424540 DOI 10.17182/hepdata.43005

None

1 data table

The cross section limits are set using two methods. The first (C=COUNT) is a simple counting experiment, and the second (C=SHAPE) use the shape of the dij et mass spectrum input to a likelihood fit.