Observed and expected distributions of the collinear mass in the $\tau_\mathrm{h}$+jet no-btag category with the BDT requirements selecting the most signal-like events. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the e+jet no-btag category with the BDT requirements selecting the most signal-like events. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the $\mu$+jet no-btag category with the BDT requirements selecting the most signal-like events. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Expected and observed upper limits at 95% CL on the scalar lepton-induced LQ production cross section times branching fraction for a LQ coupled to b quarks and $\tau$ leptons, using $\lambda = 1.5$.

Expected and observed upper limits at 95% CL on the scalar lepton-induced LQ production cross section times branching fraction for a LQ coupled to light-flavor quarks and $\tau$ leptons, using $\lambda = 1.5$.

Expected upper limit at 95% CL on the coupling strength $\lambda$ of a scalar LQ to b quarks and $\tau$ leptons.

Expected upper limit at 95% CL on the coupling strength $\lambda$ of a scalar LQ to light-flavor quarks and $\tau$ leptons.

Observed and expected distributions of the collinear mass in the $\tau_\mathrm{h}$+jet btag category with the lowest BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the e+jet btag category with the lowest BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the $\mu$+jet btag category with the lowest BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the $\tau_\mathrm{h}$+jet btag category with the intermediate BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the e+jet btag category with intermediate BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the $\mu$+jet btag category with intermediate BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the $\tau_\mathrm{h}$+jet no-btag category with the lowest BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the e+jet no-btag category with the lowest BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the $\tau_\mathrm{h}$+jet btag category with the lowest BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the $\tau_\mathrm{h}$+jet no-btag category with low BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the e+jet no-btag category with low BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the $\mu$+jet no-btag category with low BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the $\tau_\mathrm{h}$+jet no-btag category with intermediate BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the e+jet btag category with intermediate BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Observed and expected distributions of the collinear mass in the $\mu$+jet no-btag category with intermediate BDT requirement. The signal hypothesis corresponds to a scalar leptoquark coupled to u quarks and $\tau$ leptons with a coupling strength $\lambda$ equal to 1.5.

Expected and observed upper limits at 95% CL on the scalar lepton-induced LQ production cross section times branching fraction for a LQ coupled to b quarks and $\tau$ leptons, using $\lambda = 1.0$.

Expected and observed upper limits at 95% CL on the scalar lepton-induced LQ production cross section times branching fraction for a LQ coupled to b quarks and $\tau$ leptons, using $\lambda = 2.0$.

Expected and observed upper limits at 95% CL on the scalar lepton-induced LQ production cross section times branching fraction for a LQ coupled to b quarks and $\tau$ leptons, using $\lambda = 3.0$.

Expected and observed upper limits at 95% CL on the scalar lepton-induced LQ production cross section times branching fraction for a LQ coupled to light-flavor quarks and $\tau$ leptons, using $\lambda = 0.5$.

Expected and observed upper limits at 95% CL on the scalar lepton-induced LQ production cross section times branching fraction for a LQ coupled to light-flavor quarks and $\tau$ leptons, using $\lambda = 1.0$.

Expected and observed upper limits at 95% CL on the scalar lepton-induced LQ production cross section times branching fraction for a LQ coupled to light-flavor quarks and $\tau$ leptons, using $\lambda = 2.0$.

Observed and expected distributions of the jet multiplicity in the e+jet btag control region.

Observed and expected distributions of the jet multiplicity in the $\mu$+jet btag control region.

Measured min-$d_{xy}$ distribution in the 2-match category, after requiring the $d_{xy}$ muon to pass the isolation requirement $I_{\mathrm{rel}}^{\mathrm{PF}} <0.25$ (i. e., the B and D bins of the ABCD plane). Overlaid with a red histogram is the background predicted from the region of the ABCD plane failing the same requirement (the A and C bins), as well as three signal benchmark hypotheses (as defined in the legends), assuming $\alpha_D = \alpha_{\mathrm{EM}}$ (the fine-structure constant). The red hatched bands correspond to the background prediction uncertainty. The last bin includes the overflow.

Two-dimensional exclusion surfaces for $\Delta = 0.1 \, m_1$ as a function of the DM mass $m_1$ and the signal strength $y$, with $m_{A'} = 3 \, m_1$. Filled histograms denote observed limits on $\sigma(\mathrm{pp} \to A' \to \chi_2 \chi_1) \, \mathcal{B}(\chi_2 \to \chi_1 \mu^+ \mu^-)$. Solid (dashed) curves denote the observed (expected) exclusion limits at 95% CL, with 68% CL uncertainty bands around the expectation. Regions above the curves are excluded, depending on the $\alpha_D$ hypothesis: $\alpha_{\mathrm{D}} = \alpha_{\mathrm{EM}}$ (dark blue) or 0.1 (light magenta).

Two-dimensional exclusion surfaces for $\Delta = 0.4 \, m_1$ as a function of the DM mass $m_1$ and the signal strength $y$, with $m_{A'} = 3 \, m_1$. Filled histograms denote observed limits on $\sigma(\mathrm{pp} \to A' \to \chi_2 \chi_1) \, \mathcal{B}(\chi_2 \to \chi_1 \mu^+ \mu^-)$. Solid (dashed) curves denote the observed (expected) exclusion limits at 95% CL, with 68% CL uncertainty bands around the expectation. Regions above the curves are excluded, depending on the $\alpha_D$ hypothesis: $\alpha_{\mathrm{D}} = \alpha_{\mathrm{EM}}$ (dark blue) or 0.1 (light magenta).

Comparison of the $m_{miss}$ shapes for the simulated signal events within the fiducial region and those outside it, after including the effect of PU protons as describe in the text, for a generated $m_{X}$ mass of 1000 GeV. The distributions are shown for single(+z)-single(−z) proton reconstruction categories.

Product of the acceptance times the combined reconstruction and identification efficiency, as a function of $m_{X}$ , for events generated inside the fiducial volume defined in Table 1. The curves shown panel display the different final states. The definition of the fiducial region and signal model used to estimate the acceptance is provided in the text.

Product of the acceptance times the combined reconstruction and identification efficiency, as a function of $m_{X}$ , for different proton reconstruction categories in the $Z \rightarrow \mu\mu $ analysis, and for events generated inside the fiducial volume defined in Table 1. The curves shown panel display the different final states. The definition of the fiducial region and signal model used to estimate the acceptance is provided in the text.

Distributions of the reconstructed proton $\xi$ in the negative arm from the proton mixing procedure with simulated MC events, are compared to data. The ee final states are shown.The ee events are displayed without the Z boson $p_T$ requirement.For illustration, the simulated signal distributions are superimposed for various choices of $m_{X}$ , normalised to a generated fiducial cross section of 100 pb.

Distributions of the reconstructed proton $\xi$ in the positive arm from the proton mixing procedure with simulated MC events, are compared to data. The ee final states are shown.The ee events are displayed without the Z boson $p_T$ requirement.For illustration, the simulated signal distributions are superimposed for various choices of $m_{X}$ , normalised to a generated fiducial cross section of 100 pb.

Distributions of the reconstructed di-proton rapidity from the proton mixing procedure with simulated MC events, are compared to data. The ee final states are shown.The ee events are displayed without the Z boson $p_T$ requirement.For illustration, the simulated signal distributions are superimposed for various choices of $m_{X}$ , normalised to a generated fiducial cross section of 100 pb.

Distributions of the reconstructed proton $\xi$ in the negative arm from the proton mixing procedure with simulated MC events, are compared to data. The $\mu\mu$ final states are shown.The $\mu\mu$ events are displayed without the Z boson $p_T$ requirement.For illustration, the simulated signal distributions are superimposed for various choices of $m_{X}$ , normalised to a generated fiducial cross section of 100 pb.

Distributions of the reconstructed proton $\xi$ in the positive arm from the proton mixing procedure with simulated MC events, are compared to data. The $\mu\mu$ final states are shown.The $\mu\mu$ events are displayed without the Z boson $p_T$ requirement.For illustration, the simulated signal distributions are superimposed for various choices of $m_{X}$ , normalised to a generated fiducial cross section of 100 pb.

Distributions of the reconstructed di-proton rapidity from the proton mixing procedure with simulated MC events, are compared to data. The $\mu\mu$ final states are shown.The $\mu\mu$ events are displayed without the Z boson $p_T$ requirement.For illustration, the simulated signal distributions are superimposed for various choices of $m_{X}$ , normalised to a generated fiducial cross section of 100 pb.

Distributions of the reconstructed proton $\xi$ in the negative arm from the proton mixing procedure with simulated MC events, are compared to data. The $\gamma$ final states are shown.For illustration, the simulated signal distributions are superimposed for various choices of $m_{X}$ , normalised to a generated fiducial cross section of 100 pb.

Distributions of the reconstructed proton $\xi$ in the positive arm from the proton mixing procedure with simulated MC events, are compared to data. The $\gamma$ final states are shown.For illustration, the simulated signal distributions are superimposed for various choices of $m_{X}$ , normalised to a generated fiducial cross section of 100 pb.

Distributions of the reconstructed di-proton rapidity from the proton mixing procedure with simulated MC events, are compared to data. The $\gamma$ final states are shown.For illustration, the simulated signal distributions are superimposed for various choices of $m_{X}$ , normalised to a generated fiducial cross section of 100 pb.

Validation of the background modelling method, using the $e\mu$ control sample. Selected $e\mu$ events are mixed with protons from $Z\rightarrow \mu \mu$ events with $p_{T}(Z)<10$ GeV to simulate the combinatorial background shape, while the data points are unaltered $e\mu$ events. The proton $\xi$ distribution for the positive CT-PPS arm is shown.

Validation of the background modelling method, using the $e\mu$ control sample. Selected $e\mu$ events are mixed with protons from $Z\rightarrow \mu \mu$ events with $p_{T}(Z)<10$ GeV to simulate the combinatorial background shape, while the data points are unaltered $e\mu$ events. The proton $\xi$ distribution for the negative CT-PPS arm is shown.

Validation of the background modelling method, using the $e\mu$ control sample. Selected $e\mu$ events are mixed with protons from $Z\rightarrow \mu \mu$ events with $p_{T}(Z)<10$ GeV to simulate the combinatorial background shape, while the data points are unaltered $e\mu$ events. The di-proton invariant mass is shown.

Validation of the background modelling method, using the $e\mu$ control sample. Selected $e\mu$ events are mixed with protons from $Z\rightarrow \mu \mu$ events with $p_{T}(Z)<10$ GeV to simulate the combinatorial background shape, while the data points are unaltered $e\mu$ events. The $m_{miss}$ is shown.

$m_{miss}$ distributions in the $pp\rightarrow ppZeeX$, with the protons reconstructed with the multi(+z)-multi(-z)method. The background distributions are shown after the fit. The expectations for a signal with $m_{X} = 1000$ GeV are superimposed, where the fiducial production cross section is normalised to 1 pb.

$m_{miss}$ distributions in the $pp\rightarrow ppZeeX$, with the protons reconstructed with the multi(+z)-single(-z)method. The background distributions are shown after the fit. The expectations for a signal with $m_{X} = 1000$ GeV are superimposed, where the fiducial production cross section is normalised to 1 pb.

$m_{miss}$ distributions in the $pp\rightarrow ppZeeX$, with the protons reconstructed with the single(+z)-multi(-z)method. The background distributions are shown after the fit. The expectations for a signal with $m_{X} = 1000$ GeV are superimposed, where the fiducial production cross section is normalised to 1 pb.

$m_{miss}$ distributions in the $pp\rightarrow ppZeeX$, with the protons reconstructed with the single(+z)-single(-z)method. The background distributions are shown after the fit. The expectations for a signal with $m_{X} = 1000$ GeV are superimposed, where the fiducial production cross section is normalised to 1 pb.

$m_{miss}$ distributions in the $pp\rightarrow ppZ\mu\mu X$, with the protons reconstructed with the multi(+z)-multi(-z)method. The background distributions are shown after the fit. The expectations for a signal with $m_{X} = 1000$ GeV are superimposed, where the fiducial production cross section is normalised to 1 pb.

$m_{miss}$ distributions in the $pp\rightarrow ppZ\mu\mu X$, with the protons reconstructed with the multi(+z)-single(-z)method. The background distributions are shown after the fit. The expectations for a signal with $m_{X} = 1000$ GeV are superimposed, where the fiducial production cross section is normalised to 1 pb.

$m_{miss}$ distributions in the $pp\rightarrow ppZ\mu\mu X$, with the protons reconstructed with the single(+z)-multi(-z)method. The background distributions are shown after the fit. The expectations for a signal with $m_{X} = 1000$ GeV are superimposed, where the fiducial production cross section is normalised to 1 pb.

$m_{miss}$ distributions in the $pp\rightarrow ppZ\mu\mu X$, with the protons reconstructed with the single(+z)-single(-z)method. The background distributions are shown after the fit. The expectations for a signal with $m_{X} = 1000$ GeV are superimposed, where the fiducial production cross section is normalised to 1 pb.

$m_{miss}$ distributions in the $pp\rightarrow pp\gamma X$, with the protons reconstructed with the multi(+z)-multi(-z)method. The background distributions are shown after the fit. The expectations for a signal with $m_{X} = 1000$ GeV are superimposed, where the fiducial production cross section is normalised to 10 pb.

$m_{miss}$ distributions in the $pp\rightarrow pp\gamma X$, with the protons reconstructed with the multi(+z)-single(-z)method. The background distributions are shown after the fit. The expectations for a signal with $m_{X} = 1000$ GeV are superimposed, where the fiducial production cross section is normalised to 10 pb.

$m_{miss}$ distributions in the $pp\rightarrow pp\gamma X$, with the protons reconstructed with the single(+z)-multi(-z)method. The background distributions are shown after the fit. The expectations for a signal with $m_{X} = 1000$ GeV are superimposed, where the fiducial production cross section is normalised to 10 pb.

$m_{miss}$ distributions in the $pp\rightarrow pp\gamma X$, with the protons reconstructed with the single(+z)-single(-z)method. The background distributions are shown after the fit. The expectations for a signal with $m_{X} = 1000$ GeV are superimposed, where the fiducial production cross section is normalised to 10 pb.

Upper limits on the $pp\rightarrow ppZ/\gamma X$ cross section at 95% CL, as a function of $m_X$. The 68 and 95% central intervals of the expected limits are represented by the green and yellow bands, respectively, while the observed limit is superimposed as a curve. The plot corresponds to the $Z\rightarrow ee$ analysis.

Upper limits on the $pp\rightarrow ppZ/\gamma X$ cross section at 95% CL, as a function of $m_X$. The 68 and 95% central intervals of the expected limits are represented by the green and yellow bands, respectively, while the observed limit is superimposed as a curve. The plot corresponds to the $Z\rightarrow \mu\mu$ analysis.

Upper limits on the $pp\rightarrow ppZ/\gamma X$ cross section at 95% CL, as a function of $m_X$. The 68 and 95% central intervals of the expected limits are represented by the green and yellow bands, respectively, while the observed limit is superimposed as a curve. The plot corresponds to the $Z$ analysis.

Upper limits on the $pp\rightarrow ppZ/\gamma X$ cross section at 95% CL, as a function of $m_X$. The 68 and 95% central intervals of the expected limits are represented by the green and yellow bands, respectively, while the observed limit is superimposed as a curve. The plot corresponds to the $\gamma$ analysis.

Distribution of the NN output in the $\geq$1fj$\,$SR in data and the expected contribution of the signal and background processes after the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions considering the correlations of the uncertainties as obtained by the fit.

Distribution of the NN output in the $t\bar{t}\gamma\,$CR in data and the expected contribution of the signal and background processes after the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions considering the correlations of the uncertainties as obtained by the fit.

Total event yield in the $W\gamma\,$CR in data and the expected contribution of the signal and background processes after the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions considering the correlations of the uncertainties as obtained by the fit.

Distribution of the scalar sum of the jet transverse momenta in the 0fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions. The first and last bins include the underflow and overflow, respectively.

Distribution of the $\eta$ of the $b$-tagged jet in the 0fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions.

Distribution of the reconstructed top-quark mass in the 0fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions. The first and last bins include the underflow and overflow, respectively.

Distribution of the $p_{\mathrm{T}}$ of the top-quark+photon system in the 0fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions and the last bin includes the overflow.

Distribution of the photon $p_{\mathrm{T}}$ in the 0fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions and the last bin includes the overflow.

Distribution of the photon $\eta$ in the 0fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions.

Distribution of the scalar sum of the jet transverse momenta in the $\geq$1fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions and the last bin includes the overflow.

Distribution of the invariant mass of the $b$-tagged jet and the highest-$p_{\mathrm{T}}$ forward jet in the $\geq$1fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions and the last bin includes the overflow.

Distribution of $p_{\mathrm{T}}$ of the highest-$p_{\mathrm{T}}$ forward jet in the $\geq$1fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions and the last bin includes the overflow.

Distribution of the difference in $\eta$ between the highest-$p_{\mathrm{T}}$ forward jet and the photon in the $\geq$1fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions and the last bin includes the overflow.

Distribution of the energy of the system formed by the highest-$p_{\mathrm{T}}$ forward jet and the photon in the $\geq$1fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions. The first and last bins include the underflow and overflow, respectively.

Distribution of the $\eta$ of the $b$-tagged jet in the $\geq$1fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions.

Distribution of the reconstructed top-quark mass in the $\geq$1fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions. The first and last bins include the underflow and overflow, respectively.

Distribution of the $p_{\mathrm{T}}$ of the top-quark and photon system in the $\geq$1fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions and the last bin includes the overflow.

Distribution of the photon $p_{\mathrm{T}}$ in the $\geq$1fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions and the last bin includes the overflow.

Distribution of the photon $\eta$ in the $\geq$1fj$\,$SR in data and for the sum of all processes expectations before the profile-likelihood fit. The "Total" column corresponds to the sum of the expected contributions from the signal and background processes. The uncertainty represents the sum of statistical and systematic uncertainties in the signal and background predictions.

Ordered list of the 30 systematic uncertainties with the largest impact on the measured signal normalisation in the fit to data in the parton-level measurement considered as nuisance parameters (NPs) in the profile-likelihood fit. The column "NP value, error" corresponds to the nominal best-fit values and the corresponding uncertainties. The impact of each NP, $\Delta\sigma$/$\sigma_{\mathrm{pred}}$, is computed by comparing the nominal best-fit value of the POI ($\sigma$/$\sigma_{\mathrm{pred}}$) with the result of the fits when fixing the considered NP to its best-fit value shifted by its pre-fit and post-fit uncertainties. The corresponding impacts are listed in the "POI impact prefit high/low" and "POI impact high/low" columns, respectively. The "MC stat." NPs represent the MC statistical uncertainty and they enter the likelihood with a Poisson term, while all the other NPs enter the likelihood via a Gaussian term.

Ordered list of the 30 systematic uncertainties with the largest impact on the measured signal normalisation in the fit to data in the particle-level measurement considered as nuisance parameters (NPs) in the profile-likelihood fit. The column "NP value, error" corresponds to the nominal best-fit values and the corresponding uncertainties. The impact of each NP, $\Delta\sigma$/$\sigma_{\mathrm{pred}}$, is computed by comparing the nominal best-fit value of the POI ($\sigma$/$\sigma_{\mathrm{pred}}$) with the result of the fits when fixing the considered NP to its best-fit value shifted by its pre-fit and post-fit uncertainties. The corresponding impacts are listed in the "POI impact prefit high/low" and "POI impact high/low" columns, respectively. The "MC stat." NPs represent the MC statistical uncertainty and they enter the likelihood with a Poisson term, while all the other NPs enter the likelihood via a Gaussian term.

This table lists the kinematic requirements on parton-level objects used to define of the fiducial phase space for the parton-level measurement. Frixione isolation ($\href{https://arxiv.org/abs/hep-ph/9801442}{\text{hep-ph/9801442}}$) with a chosen radius of $\Delta R = 0.2$ is applied to photons ($\gamma$). The measured fiducial parton-level cross section is $\sigma_{tq\gamma}\times\mathcal{B}(t\rightarrow l\nu b) = 688\pm 23(\text{stat.})^{+75}_{-71}(\text{syst.})\,$fb.

This table lists the kinematic requirements on particle-level objects used to define of the fiducial phase space for the particle-level measurement. The particle level objects are photons ($\gamma$) not from a hadron decay, neutrinos not from a hadron decay ($\nu$), prompt electrons and muons ($\ell$) "dressed" by adding close-by ($\Delta R < 0.1$) photons, and anti-$k_t$ $R = 0.4$ jets built from stable particles ($\tau > 30\,$ps) and tau leptons excluding neutrinos and prompt dressed muons. Jets are $b$-tagged ($b$-jet) using ghost-matched $b$-hadrons with $p_{\text{T}} > 5\,$GeV. Apart from the kinematic requirements, isolation and overlap removal criteria are applied. Jets within $\Delta R = 0.4$ of a photon are removed if the $p_{\text{T}}$ of charged particles within $\Delta R = 0.3$ of the photon is smaller than $10\,\%$ of its $p_{\text{T}}$. Jets within $\Delta R = 0.4$ of a lepton are removed. Events are removed where a photon is close ($\Delta R < 0.4$) to a lepton or a surviving jet. The measured fiducial particle-level cross section is $\sigma_{tq\gamma}\times\mathcal{B}(t\rightarrow l\nu b)+\sigma_{t(\rightarrow l\nu b\gamma)q} = 303\pm 9(\text{stat.})^{+33}_{-32}(\text{syst.})\,$fb.

Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the High-pT jet SR for observed data events

Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the High-pT jet SR for expected signal events in the strong gluino pair pair production model with m(gluino)=1.8 TeV, m(chi0)=0.2 TeV, tau(chi0)=0.1 ns

Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the Trackless jet SR for observed data events

Two-dimensional distribution of the invariant mass $m_{DV}$ and the track multiplicity in the Trackless jet SR for expected signal events in the electroweak pair production model

Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in electroweakino pair production models

Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.4 TeV

Exclusion limits at 95% CL on the production cross section in the electroweak pair production model.

Exclusion limits at 95% CL on the production cross section in the strong gluino pair production models and m(gluino)=2.4 TeV

Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.0 TeV

Expected exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Observed exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the neutralino in strong gluino pair production models and m(gluino)=2.2 TeV

Expected exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Observed exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=50 GeV

Expected exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Expected (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Expected (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Observed exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Observed (+1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Observed (-1 sigma) exclusion limits at 95% CL on the lifetime and mass of the gluino in strong gluino pair production models and m(chi0)=450 GeV

Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.01 ns

Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=0.1 ns

Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=1 ns

Expected exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Expected (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Expected (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Observed exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Observed (+1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Observed (-1 sigma) exclusion limits at 95% CL on the mass of the gluino and neutralino in strong gluino pair production models and tau(chi0)=10 ns

Exclusion limits at 95% CL on the production cross section in the strong gluino pair production models and m($ ilde{\chi}^0_1$)=1.25 TeV

Acceptance cutflow for the High-pT SR for representative points in the strong gluino pair production model. See additional resources for more information.

Acceptance cutflow for the Trackless SR for representative points in the electroweak pair production model. See additional resources for more information.

Acceptance cutflow for the Trackless SR for representative points in the electroweak pair production model with heavy-flavor quarks final state. See additional resources for more information.

Acceptance cutflow for the High-pT SR for representative points in the electroweak pair production model with heavy-flavor quarks final state. See additional resources for more information.

Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R < 1150 mm

Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R [1150, 3870] mm

Reinterpretation Material: Event-level Efficiency for HighPt SR selections, R > 3870 mm

Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R < 1150 mm

Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R [1150, 3870] mm

Reinterpretation Material: Event-level Efficiency for Trackless SR selections, R > 3870 mm

Reinterpretation Material: Vertex-level Efficiency for R < 22 mm

Reinterpretation Material: Vertex-level Efficiency for R [22, 25] mm

Reinterpretation Material: Vertex-level Efficiency for R [25, 29] mm

Reinterpretation Material: Vertex-level Efficiency for R [29, 38] mm

Reinterpretation Material: Vertex-level Efficiency for R [38, 46] mm

Reinterpretation Material: Vertex-level Efficiency for R [46, 73] mm

Reinterpretation Material: Vertex-level Efficiency for R [73, 84] mm

Reinterpretation Material: Vertex-level Efficiency for R [84, 111] mm

Reinterpretation Material: Vertex-level Efficiency for R [111, 120] mm

Reinterpretation Material: Vertex-level Efficiency for R [120, 145] mm

Reinterpretation Material: Vertex-level Efficiency for R [145, 180] mm

Reinterpretation Material: Vertex-level Efficiency for R [180, 300] mm

Cutflow (acceptance x efficiency) for the High-pT SR for representative points in the strong gluino pair production model. See additional resources for more information.

Cutflow (acceptance x efficiency) for the Trackless SR for representative points in the electroweak pair production model. See additional resources for more information.

Cutflow (acceptance x efficiency) for the Trackless SR for representative points in the electroweak pair production model with heavy-flavor quarks. See additional resources for more information.

Cutflow (acceptance x efficiency) for the High-pT SR for representative points in the electroweak pair production model with heavy-flavor quarks. See additional resources for more information.

Electron $p_{T}$ distribution using 2016-2018 data sets. The complete set of selection criteria were applied. Two examples of SSM WPRIME boson signal samples with masses of 3.8 and 5.6 TeV are shown. The lower panel shows the ratio of data to SM prediction, and the shaded band represents the systematic uncertainties.

$p_{T}^{miss}$ distribution in the electron channel using 2016-2018 data sets. The complete set of selection criteria were applied. Two examples of SSM WPRIME boson signal samples with masses of 3.8 and 5.6 TeV are shown. The lower panel shows the ratio of data to SM prediction, and the shaded band represents the systematic uncertainties.

Muon $p_T$ distribution using 2016-2018 data sets. The complete set of selection criteria were applied. Two examples of SSM WPRIME boson signal samples with masses of 3.8 and 5.6 TeV are shown. The lower panel shows the ratio of data to SM prediction, and the shaded band represents the systematic uncertainties.

$p_T^{miss}$ distribution in the muon channel using 2016-2018 data sets. The complete set of selection criteria were applied. Two examples of SSM WPRIME boson signal samples with masses of 3.8 and 5.6 TeV are shown. The lower panel shows the ratio of data to SM prediction, and the shaded band represents the systematic uncertainties.

$M_T$ distribution for the E+INVISIBLE system using 2016-2018 data sets. The complete set of selection criteria were applied. Two examples of SSM WPRIME boson signal samples with masses of 3.8 and 5.6 TeV are shown. The lower panel shows the ratio of data to SM prediction, and the shaded band represents the systematic uncertainties.

$M_T$ distribution for the MU+INVISIBLE system using 2016-2018 data sets. The complete set of selection criteria were applied. Two examples of SSM WPRIME boson signal samples with masses of 3.8 and 5.6 TeV are shown. The lower panel shows the ratio of data to SM prediction, and the shaded band represents the systematic uncertainties.

Theoretical prediction for the production and decay cross-section of SSM WPRIME bosons (W --> LEPTON + NU) as a function of the WPRIME mass, for the range 200-6400 GeV and inclusive in phase-space (no cuts). The uncertainty shown covers PDF and ALPHAS uncertainties. These theoretical predictions are obtained with PYTHIA (LO) and corrected to NNLO in QCD using FEWZ program.

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the product of WPRIME cross-section production and BF(WPRIME --> LEPTON + NU) for an SSM WPRIME boson, as a function of the boson mass, for the electron decay channel. The shaded bands represent the one (green) and two (yellow) standard deviation uncertainty bands for the expected limits. The theoretical predictions for the SSM at NNLO precision in QCD are shown with narrow gray bands corresponding to the PDF and ALPHAS uncertainties.

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the product of WPRIME cross-section production and BF(WPRIME --> LEPTON + NU) for an SSM WPRIME boson, as a function of the boson mass, for the muon decay channel. The shaded bands represent the one (green) and two (yellow) standard deviation uncertainty bands for the expected limits. The theoretical predictions for the SSM at NNLO precision in QCD are shown with narrow gray bands corresponding to the PDF and ALPHAS uncertainties.

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the product of WPRIME cross-section production and BF(WPRIME --> LEPTON + NU) for an SSM WPRIME boson, as a function of the boson mass, for the combined electron and muon decay channels. The shaded bands represent the one (green) and two (yellow) standard deviation uncertainty bands for the expected limits. The theoretical predictions for the SSM at NNLO precision in QCD are shown with narrow gray bands corresponding to the PDF and ALPHAS uncertainties.

The 95% CL observed (solid line) and expected (dashed line) model independent cross section upper limits as function of the $MT_{min}$ threshold, for the electron decay channel. The shaded bands represent the one (green) and two (yellow) standard deviation uncertainty bands for the expected limits.

The 95% CL observed (solid line) and expected (dashed line) model independent cross section upper limits as function of the $MT_{min}$ threshold, for the muon decay channel. The shaded bands represent the one (green) and two (yellow) standard deviation uncertainty bands for the expected limits.

The 95% CL observed (solid line) and expected (dashed line) model independent cross section upper limits as function of the $MT_{min}$ threshold, for the combined electron and muon decay channels. The shaded bands represent the one (green) and two (yellow) standard deviation uncertainty bands for the expected limits.

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the coupling strength ratio, gWprime/gW as a function of the mass of the WPRIME boson, for the electron channel. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The area above the limit curve is excluded. The dotted line represents the case of SSM coupling, gWprime, being equal to gW, the SM coupling.

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the coupling strength ratio, gWprime/gW, as a function of the mass of the WPRIME boson, for the muon channel. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The area above the limit curve is excluded. The dotted line represents the case of SSM coupling, gWprime , being equal to gW, the SM coupling.

Exclusion limits in the 2D plane (1/R, $\mu$) for the split-UED interpretation for the n = 2 case, for the electron channel for the 2016-2018 data sets. R is the radius of the additional spatial dimension and $\mu$ the bulk mass for the fermion field in five dimensions. The expected limit is depicted as a black dashed line. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The experimentally excluded region is the entire area to the left of the solid black line.

Exclusion limits in the 2D plane (1/R, $\mu$) for the split-UED interpretation for the n = 2 case, for the muon channel for the 2016-2018 data sets. R is the radius of the additional spatial dimension and $\mu$ the bulk mass for the fermion field in five dimensions. The expected limit is depicted as a black dashed line. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The experimentally excluded region is the entire area to the left of the solid black line.

Exclusion limits in the 2D plane (1/R, $\mu$) for the split-UED interpretation for the n = 2 case, for the combined electron and muon channels for the 2016-2018 data sets. R is the radius of the additional spatial dimension and $\mu$ the bulk mass for the fermion field in five dimensions. The expected limit is depicted as a black dashed line. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The experimentally excluded region is the entire area to the left of the solid black line.

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the ${\lambda}_{231}$ coupling in the RPV SUSY model with a STAU mediator, as a function of the mass of STAU, for the electron channel and for the production coupling, ${\lambda}^{'}_{3ij}$=0.5 . The couplings ${\lambda}^{'}_{3ij}$, ${\lambda}_{231}$, and ${\lambda}_{132}$ are defined in Fig. 1. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The area above the limit curve is excluded. Limits for other values of ${\lambda}^{'}_{3ij}$ are obtained multiplying the ones shown by the ratio ${\lambda}^{'}_{3ij}$/0.5

Observed (solid line) and expected (dashed line) upper limits at 95% CL on the ${\lambda}_{132}$ coupling in the RPV SUSY model with a stau mediator, as a function of the mass of the stau, for the muon channel and for the production coupling, ${\lambda}^{'}_{3ij}$ = 0.5 . The couplings ${\lambda}^{'}_{3ij}$, ${\lambda}_{231}$, and ${\lambda}_{132}$ are defined in Fig. 1. The one (green) and two (yellow) standard deviation uncertainty bands for the expected limits are shown. The area above the limit curve is excluded. Limits for other values of ${\lambda}^{'}_{3ij}$ are obtained multiplying these ones by the ratio ${\lambda}^{'}_{3ij}$/0.5

Region in the oblique (W,Y) parameter phase space allowed by the current analysis at 95% CL. The combination of the electron and muon channel distributions from the 2017 and 2018 data sets at sqrt(s) = 13 TeV is used, having 101 fb-1 of luminosity.

Negative Log-Likelihood for the determination of the oblique W parameter, for the combination of the electron and muon channel and for 2017 and 2018 data sets (L=101 fb-1) at sqrt(s) = 13 TeV.

Total background estimate and observed data in all bins used in the limit calculation for the SSM WPRIME limits. The total event sample is split into the three years of data taking and the two lepton flavors.The distributions being shown are $M_T$ ones. The associated integrated luminosities for each year are of 35.9, 41.5, and 59.4 fb$̣^{-1}. The mass bins are numbered in ascending order.

Differential cross sections for the EW W$\gamma$jj production. Given that the ranges of some variables extend to infinity, the last bins accommodate all the events up to infinity as marked by the bin label.

Differential cross sections for the EW W$\gamma$jj production. Given that the ranges of some variables extend to infinity, the last bins accommodate all the events up to infinity as marked by the bin label.

Differential cross sections for the EW W$\gamma$jj production. Given that the ranges of some variables extend to infinity, the last bins accommodate all the events up to infinity as marked by the bin label.

Differential cross sections for the EW W$\gamma$jj production. Given that the ranges of some variables extend to infinity, the last bins accommodate all the events up to infinity as marked by the bin label.

Differential cross sections for the EW W$\gamma$jj production. Given that the ranges of some variables extend to infinity, the last bins accommodate all the events up to infinity as marked by the bin label.

Differential cross sections for the EW + QCD W$\gamma$jj production. Given that the ranges of some variables extend to infinity, the last bins accommodate all the events up to infinity as marked by the bin label.

Differential cross sections for the EW +QCD W$\gamma$jj production. Given that the ranges of some variables extend to infinity, the last bins accommodate all the events up to infinity as marked by the bin label.

Differential cross sections for the EW + QCD W$\gamma$jj production. Given that the ranges of some variables extend to infinity, the last bins accommodate all the events up to infinity as marked by the bin label.

Differential cross sections for the EW + QCD W$\gamma$jj production. Given that the ranges of some variables extend to infinity, the last bins accommodate all the events up to infinity as marked by the bin label.

Differential cross sections for the EW + QCD W$\gamma$jj production. Given that the ranges of some variables extend to infinity, the last bins accommodate all the events up to infinity as marked by the bin label.

Differential cross sections for the EW + QCD W$\gamma$jj production. Given that the ranges of some variables extend to infinity, the last bins accommodate all the events up to infinity as marked by the bin label.

The $m_{W\gamma}$ distribution for muon events (electron events are also used and the muon events are shown here as an example.) satisfying the aQGC region selection and used to set constraints on the anomalous gauge coupling parameters (left). The gray line represents a nonzero $f_{M,2}/Λ^4$ setting. Events with $m_{W\gamma} > 1500 GeV$ are included in the last bin.

Exclusion limits at the 95% CL for each aQGC coefficient, derived from the mW$\gamma$ distribution, assuming all other coefficients are set to zero. Unitarity bounds corresponding to each operator are also listed. All coupling parameter limits are in TeV^{−4}, while Ubound values are in TeV.

Results summary.

Bayesian upper exclusion limits on the ratio $g_{W'}/g_{W}$ for an SSM-like W$\prime$ boson are shown. The unity coupling ratio (blue dotted curve) corresponds to the SSM common benchmark. The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively.

Bayesian lower exclusion limits on the NUGIM G(221) mixing angle $\cot(\theta_{E})$ are shown as a function of the W$\prime$ boson mass. The theoretically excluded region is shaded in grey. The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively.

Bayesian upper exclusion limits at 95% CL on the product of the production cross section and branching fraction of a QBH in an associated $ au$ lepton and neutrino final state. Minimum threshold masses $m_{th}$ of up to 6.6 TeV are excluded at 95% CL. The observed limit (solid line) is obtained from the intersection with the LO QBH cross section (blue dotted curve). The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively.

Bayesian upper limits at 95% CL on the cross section of the process $pp\rightarrow\tau\nu$ mediated via LQ exchange in the t-channel. The inner (green) band and the outer (yellow) band indicate the regions containing 68 and 95%, respectively, of the distribution of limits expected under the background-only hypothesis. The predicted LQ cross section at LO in the three coupling benchmark scenarios is depicted in different colors for $g_{U}=1$. The uncertainty bandy correspond to the sum in quadrature of PDF and scale variations. The first benchmark scenario considers only couplings to left-handed SM fermions (i.e. $\beta_{\text{R}}^{ij}=0$) and is referred to as "best fit LH". The second benchmark, referred to as "best fit LH+RH", considers $|\beta_{\text{R}}^{\text{b}\tau}|=1$ and all other $\beta_{\text{R}}^{ij}=0$. In the third "democratic" benchmark, equal couplings only to LH fermions are assumed, i.e. $\beta_{\text{L}}^{ij}=1$ and $\beta_{\text{R}}^{ij}=0$ for all $i$ and $j$.

Expected and observed lower limits of the LQ mass as a function of the coupling $g_{U}$ in the LH scenario. The blue band shows the 68% and 95% regions of $g_{U}$ preferred by the fit to the b anomalies data.

Expected and observed lower limits of the LQ mass as a function of the coupling $g_{U}$ in the LH+RH scenario. The blue band shows the 68% and 95% regions of $g_{U}$ preferred by the fit to the b anomalies data.

Expected and observed lower limits of the LQ mass as a function of the coupling $g_{U}$ in the democratic scenario. The blue band shows the 68% and 95% regions of $g_{U}$ preferred by the fit to the b anomalies data.

Bayesian upper exclusion limits at 95% CL on each of the Wilson coefficients described by the EFT model based on 2016-2018 data. The three different coupling types represent a left-handed vector coupling ($\epsilon^{cb}_{L}$), tensor-like coupling ($\epsilon^{cb}_{T}$), and scalar-tensor-like coupling ($\epsilon^{cb}_{S_{L}}$). The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively.

Summary of exclusion limits (expected and observed) calculated at 95% CL for full Run-2 CMS data.

Background prediction and observed data yields in the signal region bins. The background yields are obtained from the background-only fit and serve as input to the simplified likelihood reinterpretation scheme. The naming of the bins is "year_binnumber", following the binning from Figure 4.

Matrix of covariance coefficients between signal region bins. The coefficients are obtained from the background-only fit and serve as input to the simplified likelihood reinterpretation scheme. The naming of the bins is "year_binnumber", following the binning used in Figure 4.

Predicted signal yields for the 2017 data-taking period, corresponding to 41.3 fb$^{-1}$, after the application of each search requirement (cumulative) for various signal hypothesis. The requirements listed are presented as total efficiencies w.r.t. the previous selection step.