The measured differential cross-sections and the predictions from the GM-VFNS calculation for the $D_s^\pm$ meson in bins of $p_T$ for $|\eta| < 2.5$. The statistical, systematic (excluding branching ratio) and branching ratio uncertainties are shown separately for data, while the total theory uncertainties are shown for GM-VFNS.

Inclusive $D^\pm$ meson production cross-sections in different fiducial volumes defined by $|\eta|<2.5$ and different $p_T$ regions. For the ATLAS measurements, the statistical, systematic (excluding branching ratio) and branching ratio uncertainties are shown separately; for the theoretical predictions, the total theoretical uncertainties are shown.

Inclusive $D_s^\pm$ meson production cross-sections in different fiducial volumes defined by $|\eta|<2.5$ and different $p_T$ regions. For the ATLAS measurements, the statistical, systematic (excluding branching ratio) and branching ratio uncertainties are shown separately; for the theoretical predictions, the total theoretical uncertainties are shown.

Distributions of the $\mathrm{NN^{SvsB}}$ output for data and the expected background after the likelihood fit in the $SR_{cQu --}$ signal region. The post-fit background expectations are shown as filled histograms, the combined pre-fit background expectations are shown as dashed lines. The signal distribution using the Wilson coefficient values $c_{tu}^{(1)}=0.04$, $c_{Qu}^{(1)}=0.1$, $c_{Qu}^{(8)}=0.1$ is shown with a dotted line, normalized to the same number of events as the background.

Summary of the observed and predicted number of events in the five 2$\ell$ control regions. The background prediction is shown after the combined likelihood fit to data under the signal-plus-background hypothesis across all control regions and signal regions. The uncertainties in the total yields are smaller than the sum in quadrature of the uncertainties in the individual contributions due to anti-correlations resulting from the likelihood fit. Int Conv refers to events with photon conversions in the inner detector, while Mat Conv refers to events with photon conversions in the detector material. QMisID refers to events with charge-misidentified lepton.

Summary of the observed and predicted number of events in the four 3$\ell$ control regions. The background prediction is shown after the combined likelihood fit to data under the signal-plus-background hypothesis across all control regions and signal regions. The uncertainties in the total yields are smaller than the sum in quadrature of the uncertainties in the individual contributions due to anti-correlations resulting from the likelihood fit. Int Conv refers to events with photon conversions in the inner detector, while Mat Conv refers to events with photon conversions in the detector material. QMisID refers to events with charge-misidentified lepton.

Comparison of the observed limits on the three WCs to the limit obtained by the ATLAS Run~1 analysis of events with $b$-tagged jets and a same-sign lepton pair [JHEP10(2015)150]. The cross-section limits from that analysis are converted to the limits on the WCs by using the fitted EFT parametrization. The bounds on the WCs are shown at the 68$\%$ CL (solid) and/or 95$\%$ CL (dashed) levels. For the ATLAS Run~1 analysis only the bounds at 95$\%$ CL are available. The vertical bar represents the SM prediction. The new-physics scale is set to $\Lambda = 1 \, \text{TeV}$.

Observed lower limits at 95$\%$ confidence level on the scale of new physics $\Lambda$ for Wilson coefficient values of 0.01, 1 and $4\pi^2$. The limits are compared with the limits obtained by the ATLAS Run~1 analysis of events with $b$-tagged jets and a same-sign lepton pair.

Observed and expected limits at 95$\%$ confidence level on the cross-section of $\sigma(pp \rightarrow tt)$.

2D likelihood scans of the Wilson coefficients $c_{tu}^{(1)}$ versus $c_{Qu}^{(1)}$. The new-physics scale is set to $\Lambda = 1 \, \text{TeV}$. In the table the $2\Delta$NLL values are shown which correspond to the minimized negative log likelihood for a given Wilson coefficient pair.

2D likelihood scans of the Wilson coefficients $c_{tu}^{(1)}$ versus $c_{Qu}^{(8)}$. The new-physics scale is set to $\Lambda = 1 \, \text{TeV}$. In the table the $2\Delta$NLL values are shown which correspond to the minimized negative log likelihood for a given Wilson coefficient pair.

2D likelihood scans of the Wilson coefficients $c_{Qu}^{(1)}$ versus $c_{Qu}^{(8)}$. The new-physics scale is set to $\Lambda = 1 \, \text{TeV}$. In the table the $2\Delta$NLL values are shown which correspond to the minimized negative log likelihood for a given Wilson coefficient pair.

1D-likelihood scan for $c_{tu}^{(1)}$. The observed and expected limits at 68\% and 95\% confidence level (CL) can be read off by finding the intersection of the likelihood scan curve with the 1$\sigma$ and 2$\sigma$ lines. The new-physics scale is set to $\Lambda = 1 \, \text{TeV}$. In the table the $2\Delta$NLL values are shown which correspond to the minimized negative log likelihood for a given Wilson coefficient value.

1D-likelihood scan for $c_{Qu}^{(1)}$. The observed and expected limits at 68\% and 95\% confidence level (CL) can be read off by finding the intersection of the likelihood scan curve with the 1$\sigma$ and 2$\sigma$ lines. The new-physics scale is set to $\Lambda = 1 \, \text{TeV}$. In the table the $2\Delta$NLL values are shown which correspond to the minimized negative log likelihood for a given Wilson coefficient value.

1D-likelihood scan for $c_{Qu}^{(8)}$. The observed and expected limits at 68\% and 95\% confidence level (CL) can be read off by finding the intersection of the likelihood scan curve with the 1$\sigma$ and 2$\sigma$ lines. The new-physics scale is set to $\Lambda = 1 \, \text{TeV}$. In the table the $2\Delta$NLL values are shown which correspond to the minimized negative log likelihood for a given Wilson coefficient value.

Post-fit agreement between data and MC prediction for the $SR_{\mathrm{loose}}^{2\ell3j}$ signal region, which uses the invariant mass of the c-tagged jet and the geometrically closest b-tagged jet, $m_{\mathit{cb}}^{\mathrm{min}\Delta R}$, as an observable. The hatched uncertainty bands include all uncertainties and their correlations. The last bins contain overflow events. "Other Top" includes single-top-quark production and associated production of $t\bar{t}$ and single top quarks with bosons. "Non-Top" includes W+jets, Z+jets, and diboson processes.

Post-fit agreement between data and MC prediction for the $SR_{\mathrm{loose}}^{1\ell6ji}$ signal region, which uses the jet multiplicity, $N_{\mathrm{jets}}$, as an observable. The hatched uncertainty bands include all uncertainties and their correlations. The last bins contain overflow events. "Other Top" includes single-top-quark production and associated production of $t\bar{t}$ and single top quarks with bosons. "Non-Top" includes W+jets, Z+jets, and diboson processes.

Post-fit agreement between data and MC prediction for the $SR_{\mathrm{tight}}^{1\ell6ji}$ signal region, which uses the jet multiplicity, $N_{\mathrm{jets}}$, as an observable. The hatched uncertainty bands include all uncertainties and their correlations. The last bins contain overflow events. "Other Top" includes single-top-quark production and associated production of $t\bar{t}$ and single top quarks with bosons. "Non-Top" includes W+jets, Z+jets, and diboson processes.

Post-fit agreement between data and MC prediction for the $SR_{\mathrm{loose}}^{2\ell4ji}$ signal region, which uses the jet multiplicity, $N_{\mathrm{jets}}$, as an observable. The hatched uncertainty bands include all uncertainties and their correlations. The last bins contain overflow events. "Other Top" includes single-top-quark production and associated production of $t\bar{t}$ and single top quarks with bosons. "Non-Top" includes W+jets, Z+jets, and diboson processes.

Post-fit agreement between data and MC prediction for the $SR_{\mathrm{tight}}^{2\ell4ji}$ signal region, which uses the jet multiplicity, $N_{\mathrm{jets}}$, as an observable. The hatched uncertainty bands include all uncertainties and their correlations. The last bins contain overflow events. "Other Top" includes single-top-quark production and associated production of $t\bar{t}$ and single top quarks with bosons. "Non-Top" includes W+jets, Z+jets, and diboson processes.

Jet multiplicity and tagging criteria for the SRs and CRs in the single-lepton and dilepton channels. All single-lepton regions are defined in the 5-jet-exclusive and 6-jet-inclusive jet selections, all dilepton regions in the 3-jet-exclusive and 4-jet-inclusive jet selections. By construction, $\mathrm{SR}^{2\ell}_{\mathrm{tight}}$ only exists for the 4-jet-inclusive selection. Identical requirements on inclusive and exclusive working points, e.g., one c@22% and one c@11% in the $\mathrm{CR}_1^{1\ell}$, indicate a veto of additional tags at the inclusive working point.

Breakdown of the fiducial $t\bar{t}+{\geq}2c$ and $t\bar{t}+1c$ cross-section uncertainties. Systematic uncertainties are grouped into signal and background modeling, instrumental, and MC statistics categories. The table lists the fractional uncertainty in the measured cross-sections in percent and is estimated from the covariance matrix of the profile likelihood fit, following EPJC 84 (2024) 593. Individual groups of uncertainties can be added in quadrature to obtain the total uncertainty. JES and JER denote the jet energy scale and resolution uncertainties, respectively. The fractional uncertainties in the fitted $t\bar{t}+{\geq}1c$ and $t\bar{t}+\text{light}$ normalization factors are included in the data statistics category. For presentation purposes, all uncertainties are symmetrized.

Measured fiducial cross-section values in comparison with various NLO+PS predictions. The uncertainties in the predictions include independent and simultaneous variations of the $\mu_R$ and $\mu_F$ scales and uncertainties in the choice of the PDF set, but no uncertainties in the parton shower or hadronization. The uncertainties in the measured values include all statistical and systematic uncertainties. For presentation purposes, the quoted measurement and prediction uncertainties are symmetrized.

Measured and predicted values for the $t\bar{t}+{\geq}1b$, $t\bar{t}+{\geq}2c$, and $t\bar{t}+1c$ cross-sections and for the cross-section ratios of these processes to total $t\bar{t}+\text{jets}$ production. The quoted uncertainties in the measurements include statistical and systematic uncertainties. The predictions are taken from the nominal setup using inclusive $t\bar{t}$ Powheg+Pythia8 predictions for the $t\bar{t}+{\geq}2c$, $t\bar{t}+1c$, and $t\bar{t}+\text{light}$ processes, and $t\bar{t}+b\bar{b}$ Powheg+Pythia8 predictions for the $t\bar{t}+{\geq}1b$ process. The first use the 5FS, the latter the 4FS, where the $b$-quarks are treated as massive particles and are included in the matrix element calculation. The uncertainties in the predictions include independent and simultaneous variations of the $\mu_R$ and $\mu_F$ scales and uncertainties in the choice of the PDF set.

Nuisance parameters with a large impact on the fiducial measurement: ranking of the ten most impactful nuisance parameters for the $t\bar{t}+{\geq}2c$ cross-section measurement. The colored boxes indicate the impact of the nuisance parameters, $\Delta\mu$ (top axis), on the corresponding parameter of interest, $\mu$. They are calculated from the covariance matrix using the post-fit up (down) uncertainties of the parameter of interest and the nuisance parameter, $\sigma_{\mathrm{POI}}^{\mathrm{up}}$ and $\sigma_{\mathrm{NP}}^{\mathrm{up}}$ ($\sigma_{\mathrm{POI}}^{\mathrm{down}}$ and $\sigma_{\mathrm{NP}}^{\mathrm{down}}$), and their linear correlation coefficient, $\rho$, following EPJC 84 (2024) 593. The data points and error bars indicate the post-fit values and uncertainties of the nuisance parameters relative to their pre-fit values, $\theta_0$, in units of their pre-fit uncertainties, $\Delta \theta$ (bottom axis). A hollow circle indicates that the nuisance parameter has a Poisson constraint.

Nuisance parameters with a large impact on the fiducial measurement: ranking of the ten most impactful nuisance parameters for the $t\bar{t}+1c$ cross-section measurement. The colored boxes indicate the impact of the nuisance parameters, $\Delta\mu$ (top axis), on the corresponding parameter of interest, $\mu$. They are calculated from the covariance matrix using the post-fit up (down) uncertainties of the parameter of interest and the nuisance parameter, $\sigma_{\mathrm{POI}}^{\mathrm{up}}$ and $\sigma_{\mathrm{NP}}^{\mathrm{up}}$ ($\sigma_{\mathrm{POI}}^{\mathrm{down}}$ and $\sigma_{\mathrm{NP}}^{\mathrm{down}}$), and their linear correlation coefficient, $\rho$, following EPJC 84 (2024) 593. The data points and error bars indicate the post-fit values and uncertainties of the nuisance parameters relative to their pre-fit values, $\theta_0$, in units of their pre-fit uncertainties, $\Delta \theta$ (bottom axis). A hollow circle indicates that the nuisance parameter has a Poisson constraint.

Nuisance parameters with a large impact on the fiducial measurement: ranking of the ten most impactful nuisance parameters for the $t\bar{t}+{\geq}2c$ ratio to total $t\bar{t}+\text{jets}$ production. The colored boxes indicate the impact of the nuisance parameters, $\Delta\mu$ (top axis), on the corresponding parameter of interest, $\mu$. They are calculated from the covariance matrix using the post-fit up (down) uncertainties of the parameter of interest and the nuisance parameter, $\sigma_{\mathrm{POI}}^{\mathrm{up}}$ and $\sigma_{\mathrm{NP}}^{\mathrm{up}}$ ($\sigma_{\mathrm{POI}}^{\mathrm{down}}$ and $\sigma_{\mathrm{NP}}^{\mathrm{down}}$), and their linear correlation coefficient, $\rho$, following EPJC 84 (2024) 593. The data points and error bars indicate the post-fit values and uncertainties of the nuisance parameters relative to their pre-fit values, $\theta_0$, in units of their pre-fit uncertainties, $\Delta \theta$ (bottom axis). A hollow circle indicates that the nuisance parameter has a Poisson constraint.

Nuisance parameters with a large impact on the fiducial measurement: ranking of the ten most impactful nuisance parameters for the $t\bar{t}+1c$ ratio to total $t\bar{t}+\text{jets}$ production. The colored boxes indicate the impact of the nuisance parameters, $\Delta\mu$ (top axis), on the corresponding parameter of interest, $\mu$. They are calculated from the covariance matrix using the post-fit up (down) uncertainties of the parameter of interest and the nuisance parameter, $\sigma_{\mathrm{POI}}^{\mathrm{up}}$ and $\sigma_{\mathrm{NP}}^{\mathrm{up}}$ ($\sigma_{\mathrm{POI}}^{\mathrm{down}}$ and $\sigma_{\mathrm{NP}}^{\mathrm{down}}$), and their linear correlation coefficient, $\rho$, following EPJC 84 (2024) 593. The data points and error bars indicate the post-fit values and uncertainties of the nuisance parameters relative to their pre-fit values, $\theta_0$, in units of their pre-fit uncertainties, $\Delta \theta$ (bottom axis). A hollow circle indicates that the nuisance parameter has a Poisson constraint.

Efficiencies and rejection rates for the $b$- and $c$-jet tagging working points of the $b/c$-tagger, as well as the selection cuts on the discriminants, $\mathcal{D}_b'$ and $\mathcal{D}_c'$ that define the tagging bins. The primes indicate that a standard logistic function is applied to the discriminants. The b@70% and c@22% working points are inclusive of their respective tighter working points. The values were estimated from single-lepton and dilepton $t\bar{t}$ events simulated with Powheg + Pythia 8.

Efficiencies and rejection rates for the $b$- and $c$-jet tagging working points of the $b/c$-tagger, as well as the selection cuts on the discriminants, $\mathcal{D}_b'$ and $\mathcal{D}_c'$ that define the tagging bins. The primes indicate that a standard logistic function is applied to the discriminants. The b@70% and c@22% working points are inclusive of their respective tighter working points. The values were estimated from single-lepton and dilepton $t\bar{t}$ events simulated with Powheg + Pythia 8.

Pre-fit event yields in the twelve single-lepton and dilepton control regions (CRs) of the analysis. The quoted uncertainties include both statistical and systematic components, but all normalization factors are fixed to their pre-fit values with no uncertainties. All uncertainties are assumed to be uncorrelated. "Other Top" includes single-top-quark production and associated production of $t\bar{t}$ and single top quarks with bosons. "Non-Top" includes W+jets, Z+jets, and diboson processes. The "Fakes" category includes events from misidentified leptons and non-prompt leptons, estimated through the data-driven matrix method in the single-lepton channel and through MC predictions in the dilepton channel.

Pre-fit event yields in the seven signal regions (SRs) of the analysis. The quoted uncertainties include both statistical and systematic components, but all normalization factors are fixed to their pre-fit values with no uncertainties. All uncertainties are assumed to be uncorrelated. "Other Top" includes single-top-quark production and associated production of $t\bar{t}$ and single top quarks with bosons. "Non-Top" includes W+jets, Z+jets, and diboson processes. The "Fakes" category includes events from misidentified leptons and non-prompt leptons, estimated through the data-driven matrix method in the single-lepton channel and through MC predictions in the dilepton channel.

Post-fit event yields in the twelve single-lepton and dilepton control regions (CRs) of the analysis. The quoted uncertainties include both statistical and systematic components, and post-fit correlations between uncertainties are taken into account. "Other Top" includes single-top-quark production and associated production of $t\bar{t}$ and single top quarks with bosons. "Non-Top" includes W+jets, Z+jets, and diboson processes. The "Fakes" category includes events from misidentified leptons and non-prompt leptons, estimated through the data-driven matrix method in the single-lepton channel and through MC predictions in the dilepton channel.

Post-fit event yields in the seven signal regions (SRs) of the analysis. The quoted uncertainties include both statistical and systematic components, and post-fit correlations between uncertainties are taken into account. "Other Top" includes single-top-quark production and associated production of $t\bar{t}$ and single top quarks with bosons. "Non-Top" includes W+jets, Z+jets, and diboson processes. The "Fakes" category includes events from misidentified leptons and non-prompt leptons, estimated through the data-driven matrix method in the single-lepton channel and through MC predictions in the dilepton channel.

Statistical covariance between bins of Table 2

Mean multiplicity of $K^{0}_{S}$ per unit $(\eta, \phi)$ in the transverse region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 3

Mean scalar sum-$p_{T}$ of $K^{0}_{S}$ per unit $(\eta, \phi)$ in the away region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 4

Mean scalar sum-$p_{T}$ of $K^{0}_{S}$ per unit $(\eta, \phi)$ in the towards region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 5

Mean scalar sum-$p_{T}$ of $K^{0}_{S}$ per unit $(\eta, \phi)$ in the transverse region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 6

Ratio of the multiplicity of $K^{0}_{S}$ to prompt charged particles in the away region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 7

Ratio of the multiplicity of $K^{0}_{S}$ to prompt charged particles in the towards region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 8

Ratio of the multiplicity of $K^{0}_{S}$ to prompt charged particles in the transverse region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 9

Ratio of the scalar sum-pt of $K^{0}_{S}$ to prompt charged particles in the away region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 10

Ratio of the scalar sum-pt of $K^{0}_{S}$ to prompt charged particles in the towards region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 11

Ratio of the scalar sum-pt of $K^{0}_{S}$ to prompt charged particles in the transverse region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 12

Mean-$p_{T}$ of $K^{0}_{S}$ in the away region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 13

Mean-$p_{T}$ of $K^{0}_{S}$ in the towards region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 14

Mean-$p_{T}$ of $K^{0}_{S}$ in the transverse region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 15

Mean multiplicity of $\Lambda$ and $\bar{\Lambda}$ per unit $(\eta, \phi)$ in the away region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 16

Mean multiplicity of $\Lambda$ and $\bar{\Lambda}$ per unit $(\eta, \phi)$ in the towards region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 17

Mean multiplicity of $\Lambda$ and $\bar{\Lambda}$ per unit $(\eta, \phi)$ in the transverse region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 18

Mean scalar sum-$p_{T}$ of $\Lambda$ and $\bar{\Lambda}$ per unit $(\eta, \phi)$ in the away region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 19

Mean scalar sum-$p_{T}$ of $\Lambda$ and $\bar{\Lambda}$ per unit $(\eta, \phi)$ in the towards region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 20

Mean scalar sum-$p_{T}$ of $\Lambda$ and $\bar{\Lambda}$ per unit $(\eta, \phi)$ in the transverse region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 21

Ratio of the multiplicity of $\Lambda$ and $\bar{\Lambda}$ to prompt charged particles in the away region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 22

Ratio of the multiplicity of $\Lambda$ and $\bar{\Lambda}$ to prompt charged particles in the towards region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 23

Ratio of the multiplicity of $\Lambda$ and $\bar{\Lambda}$ to prompt charged particles in the transverse region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 24

Ratio of the scalar sum-pt of $\Lambda$ and $\bar{\Lambda}$ to prompt charged particles in the away region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 25

Ratio of the scalar sum-pt of $\Lambda$ and $\bar{\Lambda}$ to prompt charged particles in the towards region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 26

Ratio of the scalar sum-pt of $\Lambda$ and $\bar{\Lambda}$ to prompt charged particles in the transverse region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 27

Ratio of the multiplicity of $\Lambda$ and $\bar{\Lambda}$ to $K^{0}_{S}$ in the away region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 28

Ratio of the multiplicity of $\Lambda$ and $\bar{\Lambda}$ to $K^{0}_{S}$ in the towards region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 29

Ratio of the multiplicity of $\Lambda$ and $\bar{\Lambda}$ to $K^{0}_{S}$ in the transverse region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 30

Ratio of the scalar sum-pt of $\Lambda$ and $\bar{\Lambda}$ to $K^{0}_{S}$ in the away region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 31

Ratio of the scalar sum-pt of $\Lambda$ and $\bar{\Lambda}$ to $K^{0}_{S}$ in the towards region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 32

Ratio of the scalar sum-pt of $\Lambda$ and $\bar{\Lambda}$ to $K^{0}_{S}$ in the transverse region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 33

Mean-$p_{T}$ of $\Lambda$ and $\bar{\Lambda}$ in the away region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 34

Mean-$p_{T}$ of $\Lambda$ and $\bar{\Lambda}$ in the towards region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 35

Mean-$p_{T}$ of $\Lambda$ and $\bar{\Lambda}$ in the transverse region vs. leading-jet $p_{T}$

Statistical covariance between bins of Table 36

Mean multiplicity of $K^{0}_{S}$ per unit $(\eta, \phi)$ in the away region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 37

Mean multiplicity of $K^{0}_{S}$ per unit $(\eta, \phi)$ in the towards region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 38

Mean multiplicity of $K^{0}_{S}$ per unit $(\eta, \phi)$ in the transverse region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 39

Mean scalar sum-$p_{T}$ of $K^{0}_{S}$ per unit $(\eta, \phi)$ in the away region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 40

Mean scalar sum-$p_{T}$ of $K^{0}_{S}$ per unit $(\eta, \phi)$ in the towards region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 41

Mean scalar sum-$p_{T}$ of $K^{0}_{S}$ per unit $(\eta, \phi)$ in the transverse region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 42

Ratio of the multiplicity of $K^{0}_{S}$ to prompt charged particles in the away region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 43

Ratio of the multiplicity of $K^{0}_{S}$ to prompt charged particles in the towards region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 44

Ratio of the multiplicity of $K^{0}_{S}$ to prompt charged particles in the transverse region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 45

Ratio of the scalar sum-pt of $K^{0}_{S}$ to prompt charged particles in the away region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 46

Ratio of the scalar sum-pt of $K^{0}_{S}$ to prompt charged particles in the towards region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 47

Ratio of the scalar sum-pt of $K^{0}_{S}$ to prompt charged particles in the transverse region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 48

Mean-$p_{T}$ of $K^{0}_{S}$ in the away region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 49

Mean-$p_{T}$ of $K^{0}_{S}$ in the towards region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 50

Mean-$p_{T}$ of $K^{0}_{S}$ in the transverse region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 51

Mean multiplicity of $\Lambda$ and $\bar{\Lambda}$ per unit $(\eta, \phi)$ in the away region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 52

Mean multiplicity of $\Lambda$ and $\bar{\Lambda}$ per unit $(\eta, \phi)$ in the towards region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 53

Mean multiplicity of $\Lambda$ and $\bar{\Lambda}$ per unit $(\eta, \phi)$ in the transverse region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 54

Mean scalar sum-$p_{T}$ of $\Lambda$ and $\bar{\Lambda}$ per unit $(\eta, \phi)$ in the away region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 55

Mean scalar sum-$p_{T}$ of $\Lambda$ and $\bar{\Lambda}$ per unit $(\eta, \phi)$ in the towards region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 56

Mean scalar sum-$p_{T}$ of $\Lambda$ and $\bar{\Lambda}$ per unit $(\eta, \phi)$ in the transverse region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 57

Ratio of the multiplicity of $\Lambda$ and $\bar{\Lambda}$ to prompt charged particles in the away region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 58

Ratio of the multiplicity of $\Lambda$ and $\bar{\Lambda}$ to prompt charged particles in the towards region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 59

Ratio of the multiplicity of $\Lambda$ and $\bar{\Lambda}$ to prompt charged particles in the transverse region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 60

Ratio of the scalar sum-pt of $\Lambda$ and $\bar{\Lambda}$ to prompt charged particles in the away region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 61

Ratio of the scalar sum-pt of $\Lambda$ and $\bar{\Lambda}$ to prompt charged particles in the towards region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 62

Ratio of the scalar sum-pt of $\Lambda$ and $\bar{\Lambda}$ to prompt charged particles in the transverse region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 63

Ratio of the multiplicity of $\Lambda$ and $\bar{\Lambda}$ to $K^{0}_{S}$ in the away region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 64

Ratio of the multiplicity of $\Lambda$ and $\bar{\Lambda}$ to $K^{0}_{S}$ in the towards region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 65

Ratio of the multiplicity of $\Lambda$ and $\bar{\Lambda}$ to $K^{0}_{S}$ in the transverse region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 66

Ratio of the scalar sum-pt of $\Lambda$ and $\bar{\Lambda}$ to $K^{0}_{S}$ in the away region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 67

Ratio of the scalar sum-pt of $\Lambda$ and $\bar{\Lambda}$ to $K^{0}_{S}$ in the towards region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 68

Ratio of the scalar sum-pt of $\Lambda$ and $\bar{\Lambda}$ to $K^{0}_{S}$ in the transverse region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 69

Mean-$p_{T}$ of $\Lambda$ and $\bar{\Lambda}$ in the away region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 70

Mean-$p_{T}$ of $\Lambda$ and $\bar{\Lambda}$ in the towards region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 71

Mean-$p_{T}$ of $\Lambda$ and $\bar{\Lambda}$ in the transverse region vs. $N_\textrm{ch,trans}$

Statistical covariance between bins of Table 72

Measured total $t\bar{t}\gamma$ production and decay fiducial inclusive cross-sections in both decay channels and in the combination.

Summary of the impact of the systematic uncertainties on the $t\bar{t}\gamma$ fiducial inclusive cross-section in the single-lepton and dilepton channels and their combination grouped into different categories. The quoted relative uncertainties are obtained by repeating the fit, fixing a set of nuisance parameters of the sources corresponding to each category to their post-fit values, and subtracting in quadrature the resulting uncertainty from the total uncertainty of the nominal fit. The total uncertainty is different from the sum in quadrature of the components due to correlations among nuisance parameters.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the single-lepton channel as a function of the $\Delta R(\gamma,b)_{min}$. The last bin of the distribution includes the overflow events.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the single-lepton channel as a function of the $\Delta R(\gamma,b)_{min}$. The last bin of the distribution includes the overflow events.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the single-lepton channel as a function of the $\Delta R(\gamma,l)$. The last bin of the distribution includes the overflow events.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the single-lepton channel as a function of the $\Delta R(\gamma,l)$. The last bin of the distribution includes the overflow events.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the single-lepton channel as a function of the $\Delta R(l,j)_{min}$. The last bin of the distribution includes the overflow events.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the single-lepton channel as a function of the $\Delta R(l,j)_{min}$. The last bin of the distribution includes the overflow events.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(\gamma,b)_{min}$. The last bin of the distribution includes the overflow events.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(\gamma,b)_{min}$. The last bin of the distribution includes the overflow events.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(\gamma,l)_{min}$. The last bin of the distribution includes the overflow events.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(\gamma,l)_{min}$. The last bin of the distribution includes the overflow events.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(l,j)_{min}$. The last bin of the distribution includes the overflow events.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(l,j)_{min}$. The last bin of the distribution includes the overflow events.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in the combined fiducial phase space of the single-lepton and dilepton channels as a function of the photon $p_T$. The last bin of the distributions includes the overflow events.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in the combined fiducial phase space of the single-lepton and dilepton channels as a function of the photon $p_T$. The last bin of the distributions includes the overflow events.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in the combined fiducial phase space of the single-lepton and dilepton channels as a function of the photon $|\eta|$.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in the combined fiducial phase space of the single-lepton and dilepton channels as a function of the photon $|\eta|$.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $p_T(\gamma)$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $p_T(\gamma)$. The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $|\eta(\gamma)|$.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $|\eta(\gamma)|$.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $p_T(j_1)$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $p_T(j_1)$. The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $\Delta R(\gamma,b)_{min}$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $\Delta R(\gamma,b)_{min}$. The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $\Delta R(\gamma,l)$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $\Delta R(\gamma,l)$. The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $\Delta R(l,j)_{min}$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $\Delta R(l,j)_{min}$. The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $|\Delta \eta(l,l)|$ . The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $|\Delta \eta(l,l)|$ . The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $\Delta \phi(l,l)$ . The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $\Delta \phi(l,l)$ . The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $p_T(l,l)$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $p_T(l,l)$. The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(\gamma,l_1)$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(\gamma,l_1)$. The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(\gamma,l_2)$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(\gamma,l_2)$. The last bin of the distribution includes the overflow events.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the single-lepton channel as a function of the $p_T(\gamma)$. The last bin of the distribution includes the overflow events.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the single-lepton channel as a function of the $p_T(\gamma)$. The last bin of the distribution includes the overflow events.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the single-lepton channel as a function of the $|\eta(\gamma)|$.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the single-lepton channel as a function of the $|\eta(\gamma)|$.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the single-lepton channel as a function of the $p_T(j_1)$. The last bin of the distribution includes the overflow events.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the single-lepton channel as a function of the $p_T(j_1)$. The last bin of the distribution includes the overflow events.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the dilepton channel as a function of the $p_T(\gamma)$. The last bin of the distribution includes the overflow events.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the dilepton channel as a function of the $p_T(\gamma)$. The last bin of the distribution includes the overflow events.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the dilepton channel as a function of the $|\eta(\gamma)|$.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the dilepton channel as a function of the $|\eta(\gamma)|$.

Absolute $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the dilepton channel as a function of the $p_T(j_1)$. The last bin of the distribution includes the overflow events.

Normalised $t\bar{t}\gamma$ production differential cross-sections measured in fiducial phase space in the dilepton channel as a function of the $p_T(j_1)$. The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $p_T(\gamma)$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $p_T(\gamma)$. The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $|\eta(\gamma)|$.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $|\eta(\gamma)|$.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $p_T(j_1)$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the single-lepton channel as a function of the $p_T(j_1)$. The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(\gamma,b)_{min}$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(\gamma,b)_{min}$. The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(\gamma,l)_{min}$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(\gamma,l)_{min}$. The last bin of the distribution includes the overflow events.

Absolute differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(l,j)_{min}$. The last bin of the distribution includes the overflow events.

Normalised differential cross-section of the total $t\bar{t}\gamma$ production and decay measured in fiducial phase space in the dilepton channel as a function of the $\Delta R(l,j)_{min}$. The last bin of the distribution includes the overflow events.

Observed and expected 68% and 95% credible intervals on $C/\Lambda^2\ [\text{TeV}^{-2} ]$ for the $C_{tW}$ operators and $C_{tB}$ obtained from the $t\bar{t}\gamma$ measurement, comparing the results obtained from the marginalised quadratic fit (‘marg.’) and the independent quadratic fits (‘indep.’). Also shown are the best-fit values (global mode) for each operator.

Observed and expected 68% and 95% credible intervals on $C/\Lambda^2\ [\text{TeV}^{-2} ]$ for the $C_{tW}$ operators and $C_{tB}$ obtained from a combined $t\bar{t}Z$ and $t\bar{t}\gamma$ measurements comparing the results obtained from the marginalised global quadratic fit (‘marg.’) and the independent quadratic fits (‘indep.’). Also shown are the best-fit values (global mode) for each operator.

Contributions of the systematic uncertainties grouped in categories in each bin of the measurement of the absolute $t\bar{t}\gamma$ production differential cross-sections measured in the combined fiducial phase space of the single-lepton and dilepton channels as a function of the photon $p_T$. The relative uncertainties quoted are obtained by repeating the fit, fixing the set of nuisance parameters of the sources corresponding to each category to their post-fit values, and subtracting in quadrature the resulting uncertainty from the total uncertainty of the nominal fit.

Contributions of the systematic uncertainties grouped in categories in each bin of the measurement of the absolute $t\bar{t}\gamma$ production differential cross-sections measured in the combined fiducial phase space of the single-lepton and dilepton channels as a function of the photon $\eta$. The relative uncertainties quoted are obtained by repeating the fit, fixing the set of nuisance parameters of the sources corresponding to each category to their post-fit values, and subtracting in quadrature the resulting uncertainty from the total uncertainty of the nominal fit.

Table with post-fit yields in the four regions used in the measurement. The correlations of the nuisance parameters, as obtained by the fit, are considered for the calculation of the uncertainties.

Ratio of the $t\bar{t}$ to the $Z$-boson cross section compared to the predictions for several sets of parton distribution functions. The total cross section for $t\bar{t}$ production and the fiducial cross section for $Z$-boson production are used. The uncertainty on the prediction represents the PDF+$\alpha_{s}$ variations.

Nuisance parameter ranking plot for the $t\bar{t}$ signal-strength. Only the 10 most important nuisance parameters are shown. The impact of each nuisance parameter on the measured cross section, is defined as the shift induced in measured cross-section as the nuisance parameter is shifted by its pre-fit and post-fit uncertainties from its nominal best-fit value and then fixed while all other nuisance parameters profiled.

Nuisance parameter ranking plot for the ratio of the $t\bar{t}$ and $Z$-boson signal-strengths. Only the 10 most important nuisance parameters are shown. The impact of each nuisance parameter on the measured ratio, is defined as the shift induced in measured ratio as the nuisance parameter is shifted by its pre-fit and post-fit uncertainties from its nominal best-fit value and then fixed while all other nuisance parameters profiled.

Nuisance parameter ranking plot for the $Z$-boson signal-strength. Only the 10 most important nuisance parameters are shown. The impact of each nuisance parameter on the measured cross section, is defined as the shift induced in measured cross-section as the nuisance parameter is shifted by its pre-fit and post-fit uncertainties from its nominal best-fit value and then fixed while all other nuisance parameters profiled.

Charged jet spectra using two cone radius parameters R = 0.2 and 0.3 and a leading track selection of pT > 0.15 GeV, for centrality 30-50%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Charged jet spectra using two cone radius parameters R = 0.2 and 0.3 and a leading track selection of pT > 0.15 GeV, for centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Charged jet spectra using two cone radius parameters R = 0.2 and 0.3 and a leading track selection of pT > 5 GeV, for centrality 0-10%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Charged jet spectra using two cone radius parameters R = 0.2 and 0.3 and a leading track selection of pT > 5 GeV, for centrality 10-30%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Charged jet spectra using two cone radius parameters R = 0.2 and 0.3 and a leading track selection of pT > 5 GeV, for centrality 30-50%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Charged jet spectra using two cone radius parameters R = 0.2 and 0.3 and a leading track selection of pT > 5 GeV, for centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Charged jet spectra using two cone radius parameters R = 0.2 and 0.3 and a leading track selection of pT > 10 GeV, for centrality 0-10%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Charged jet spectra using two cone radius parameters R = 0.2 and 0.3 and a leading track selection of pT > 10 GeV, for centrality 10-30%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Charged jet spectra using two cone radius parameters R = 0.2 and 0.3 and a leading track selection of pT > 10 GeV, for centrality 30-50%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Charged jet spectra using two cone radius parameters R = 0.2 and 0.3 and a leading track selection of pT > 10 GeV, for centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Ratio of charged jet spectra with leading track selection of pT > 0.15 GeV to pT > 5 GeV using two cone radius parameters R = 0.2 and 0.3, for centrality 0-10%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Ratio of charged jet spectra with leading track selection of pT > 0.15 GeV to pT > 5 GeV using two cone radius parameters R = 0.2 and 0.3, for centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Ratio of charged jet spectra with leading track selection of pT > 10 GeV to pT > 5 GeV using two cone radius parameters R = 0.2 and 0.3, for centrality 0-10%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Ratio of charged jet spectra with leading track selection of pT > 10 GeV to pT > 5 GeV using two cone radius parameters R = 0.2 and 0.3, for centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Nuclear modification factor, constructed as the ratio of jet pT spectra in central and peripheral collisions normalized by the nuclear overlap functions, for charged jets with either R = 0.2 or R = 0.3 and a leading charged particle with pT > 0.15 GeV. Central collisions are defined to have centrality 0-10% and peripheral collisions are defined to have centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Nuclear modification factor, constructed as the ratio of jet pT spectra in central and peripheral collisions normalized by the nuclear overlap functions, for charged jets with either R = 0.2 or R = 0.3 and a leading charged particle with pT > 0.15 GeV. Central collisions are defined to have centrality 10-30% and peripheral collisions are defined to have centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Nuclear modification factor, constructed as the ratio of jet pT spectra in central and peripheral collisions normalized by the nuclear overlap functions, for charged jets with either R = 0.2 or R = 0.3 and a leading charged particle with pT > 0.15 GeV. Central collisions are defined to have centrality 30-50% and peripheral collisions are defined to have centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Nuclear modification factor, constructed as the ratio of jet pT spectra in central and peripheral collisions normalized by the nuclear overlap functions, for charged jets with either R = 0.2 or R = 0.3 and a leading charged particle with pT > 5 GeV. Central collisions are defined to have centrality 0-10% and peripheral collisions are defined to have centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Nuclear modification factor, constructed as the ratio of jet pT spectra in central and peripheral collisions normalized by the nuclear overlap functions, for charged jets with either R = 0.2 or R = 0.3 and a leading charged particle with pT > 5 GeV. Central collisions are defined to have centrality 10-30% and peripheral collisions are defined to have centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Nuclear modification factor, constructed as the ratio of jet pT spectra in central and peripheral collisions normalized by the nuclear overlap functions, for charged jets with either R = 0.2 or R = 0.3 and a leading charged particle with pT > 5 GeV. Central collisions are defined to have centrality 30-50% and peripheral collisions are defined to have centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Nuclear modification factor, constructed as the ratio of jet pT spectra in central and peripheral collisions normalized by the nuclear overlap functions, for charged jets with either R = 0.2 or R = 0.3 and a leading charged particle with pT > 10 GeV. Central collisions are defined to have centrality 0-10% and peripheral collisions are defined to have centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Nuclear modification factor, constructed as the ratio of jet pT spectra in central and peripheral collisions normalized by the nuclear overlap functions, for charged jets with either R = 0.2 or R = 0.3 and a leading charged particle with pT > 10 GeV. Central collisions are defined to have centrality 10-30% and peripheral collisions are defined to have centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Nuclear modification factor, constructed as the ratio of jet pT spectra in central and peripheral collisions normalized by the nuclear overlap functions, for charged jets with either R = 0.2 or R = 0.3 and a leading charged particle with pT > 10 GeV. Central collisions are defined to have centrality 30-50% and peripheral collisions are defined to have centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Nuclear modification factor, constructed as the ratio of jet pT spectra in central and peripheral collisions normalized by the nuclear overlap functions, as a function of the average number of participants in the collision (<Npart>), for charged jets with pT = 60-70 GeV and either R = 0.2 or R = 0.3 and a leading charged particle with pT > 0.15 GeV. The correspondence between <Npart> and the centrality classes is given in Table 1 of the paper, and peripheral collisions are defined to have centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Nuclear modification factor, constructed as the ratio of jet pT spectra in central and peripheral collisions normalized by the nuclear overlap functions, as a function of the average number of participants in the collision (<Npart>), for charged jets with pT = 60-70 GeV and either R = 0.2 or R = 0.3 and a leading charged particle with pT > 5 GeV. The correspondence between <Npart> and the centrality classes is given in Table 1 of the paper, and peripheral collisions are defined to have centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Nuclear modification factor, constructed as the ratio of jet pT spectra in central and peripheral collisions normalized by the nuclear overlap functions, as a function of the average number of participants in the collision (<Npart>), for charged jets with pT = 60-70 GeV and either R = 0.2 or R = 0.3 and a leading charged particle with pT > 10 GeV. The correspondence between <Npart> and the centrality classes is given in Table 1 of the paper, and peripheral collisions are defined to have centrality 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

Ratio of charged jet pT-spectra with radius parameter R = 0.2 and 0.3 and a leading charged particle with pT > 5 GeV, for two centrality classes 0-10% and 50-80%. The two systematic uncertainties correspond to the shape uncertainty and the correlated uncertainty.

The K0S cross section for 5 jet ET ranges.

The LAMBDA cross section for 5 jet ET ranges.