2$\tau$ HighMass SR eff.

2$\tau$ multibin SR eff.

2$\tau$ GMSB SR eff.

1$\tau$ Compressed SR eff.

1$\tau$ MediumMass SR eff.

2$\tau$ Compressed SR eff.

2$\tau$ HighMass SR eff.

2$\tau$ multibin SR eff.

2$\tau$ GMSB SR eff.

1$\tau$ Compressed SR acceptance.

1$\tau$ MediumMass SR acceptance.

2$\tau$ Compressed SR acceptance.

2$\tau$ HighMass SR acceptance.

2$\tau$ multibin SR acceptance.

2$\tau$ GMSB SR acceptance.

1$\tau$ Compressed SR acceptance.

1$\tau$ MediumMass SR acceptance.

2$\tau$ Compressed SR acceptance.

2$\tau$ HighMass SR acceptance.

2$\tau$ multibin SR acceptance.

2$\tau$ GMSB SR acceptance.

Cutflow table of the $1\tau$ compressed SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.

Cutflow table of the $1\tau$ medium-mass SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.

Cutflow table of the $2\tau$ compressed SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.

Cutflow table of the $2\tau$ high-mass SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.

Cutflow table of the $2\tau$ multibin SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.

Cutflow table of the $2\tau$ GMSB SR for the four signal benchmark scenarios of low, medium, and high mass-splitting in the simplified model as well as the GMSB model.

Best performing fit setups entering the final combination as a function of the LSP mass and the gluino mass. 'S' marks the simultaneous fit of the four simplified model single-bin SRs, 'M' denotes the simultaneous fit of the two $1\tau$ SRs and the $2\tau$ multibin SR.

Observed exclusion contour at 95% CL as a function of tanBeta and the SUSY-breaking mass scale Lambda.

Expected exclusion contour at 95% CL as a function of tanBeta and the SUSY-breaking mass scale Lambda.

Observed exclusion contour at 95% CL as a function of the LSP mass and the gluino mass.

Expected exclusion contour at 95% CL as a function of the LSP mass and the gluino mass.

Observed upper limits on the production cross section at 95% CL in pb as a function of tanBeta and SUSY breaking mass scale Lambda.

Observed upper limits on the production cross section at 95% CL in pb as a function of the LSP mass and the gluino mass.

Yields of the expected background from the SM in the bins of the multibin SR of the $2\tau$ channel with all bins being simultaneously used to constrain the background prediction. Expectation is given with the scalings computed in the combined fit applied. Uncertainties are statistial plus systematrics. Only the subsamples contributing the respective region are considered.

$m_{\mathrm{T}}^{\tau}$ in the compressed $m_{\mathrm{T}}^{\tau}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.

$E_{\mathrm{T}}^{\mathrm{miss}}$ in the compressed $E_{\mathrm{T}}^{\mathrm{miss}}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.

$m_{\mathrm{T}}^{\tau}$ in the medium-mass $m_{\mathrm{T}}^{\tau}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.

$E_{\mathrm{T}}^{\mathrm{miss}}$ in the medium-mass $E_{\mathrm{T}}^{\mathrm{miss}}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.

$H_{\mathrm{T}}$ in the medium-mass $H_{\mathrm{T}}$ VR of the $1\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.

$m_{\mathrm{T}}^{\tau_1}$ + $m_{\mathrm{T}}^{\tau_2}$ in the top VR of the $2\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.

$H_{\mathrm{T}}$ in the $W$ VR of the $2\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.

$m_{\mathrm{T}}^{\tau_1}$ + $m_{\mathrm{T}}^{\tau_2}$ in the $Z$ VR of the $2\tau$ channel, illustrating the background modeling after the fit. The last bin includes overflow events.

$m_{\mathrm{T}}^{\tau}$ in the compressed SR of the $1\tau$ channel before application of the $m_{\mathrm{T}}^{\tau}$ > 80 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.

$H_{\mathrm{T}}$ in the medium-mass SR of the $1\tau$ channel before application of the $H_{\mathrm{T}}$ > 1000 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.

$m_{\mathrm{T}}^{\mathrm{sum}}$ in the compressed SR of the $2\tau$ channel before application of the $m_{\mathrm{T}}^{\mathrm{sum}}$ > 1600 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.

$H_{\mathrm{T}}$ in the high-mass SR of the $2\tau$ channel before application of the $H_{\mathrm{T}}$ > 1100 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.

mT(tau_1) + mT(tau_2) in the multibin SR of the 2T channel. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.

$H_{\mathrm{T}}$ in the GMSB SR of the $2\tau$ channel before application of the $H_{\mathrm{T}}$ > 1900 GeV requirement. The last bin includes overflow events. Signal predictions corresponding to the simplified model scenarios of low (LM), medium (MM), and high mass-splitting (HM) as well as for the GMSB benchmark are given.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 120 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 120 to 140 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 160 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 160 to 180 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 200 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 200 to 220 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 300 to 340 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 340 to 380 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 60 to 80 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 80 to 100 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged pions emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of positively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 120 to 180 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 280 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 60 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of negatively charged kaons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 120 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 100 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 300 to 380 mrad and in the longitudinal range from 0 to 18cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 100 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 300 to 380 mrad and in the longitudinal range from 18 to 36cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 100 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 300 to 380 mrad and in the longitudinal range from 36 to 54cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 100 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 300 to 380 mrad and in the longitudinal range from 54 to 72cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 100 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 260 to 300 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 300 to 380 mrad and in the longitudinal range from 72 to 89.99cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 0 to 20 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 20 to 40 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 40 to 60 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 60 to 100 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 100 to 140 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 140 to 180 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 180 to 220 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

Double differential yiedls of protons emitted from the surface of the T2K replica target, in the polar angle range from 220 to 260 mrad and in the longitudinal range from 89.99 to 90.01cm, as a function of momentum. The normalization is per proton on target.

The observed and expected 95% CL upper limits on model-independent visible cross-sections, along with the observed $p0$ values, for the stable signal region, as a function of different mass windows, for which the lower bound is shown. The upper boundary on the mass window is 5 TeV for all windows.

The observed and expected 95% CL upper limits on model-independent visible cross-sections, along with the observed $p0$ values, for the metastable signal region, as a function of different mass windows, for which the lower bound is shown. The upper boundary on the mass window is 5 TeV for all windows.

For each gluino lifetime and mass in the signal samples, the lower boundary of the mass window in which at least $70\%$ of the reconstructed signal appears. The upper boundary for all mass windows is 5 TeV.

Acceptance and efficiency for a representative set of pair-produced gluino signal samples. The mass of the gluino ($m(\tilde{g})$), its lifetime ($\tau(\tilde{g})$) and the mass of the neutralino ($m(\tilde{\chi}^{0})$) are given in the first three columns. The Pythia 6.4.27 signal samples shown in this table are not reweighted to match the transverse momentum of the gluino-gluino system as simulated by MadGraph5_aMC@NLO. The acceptance is defined as the fraction of events passing a loose set of fiducial requirements. The full simulation efficiency (Full sim. $\epsilon$) is defined as the ratio of the number of reconstructed events, as expected by the full ATLAS simulation, and the number of events passing the fiducial requirements. The parameterised simulation efficiency (Param. sim. $\epsilon$) is defined as the ratio of the number of events estimated using a set of parametrised efficiencies (see auxiliary Figures 9,10,11,12) and the number of events passing the fiducial requirements alone.

The reconstructed candidate track mass distributions for observed data, predicted background, and the expected contribution from two signal models in the metastable R-hadron signal region. The yellow band around the background estimation includes both the statistical and systematic uncertainties.

The reconstructed candidate track mass distributions for observed data, predicted background, and the expected contribution from two signal models in the stable R-hadron signal region. The yellow band around the background estimation includes both the statistical and systematic uncertainties.

The 95% CL upper limit on the cross-section as a function of mass for gluinos with lifetime $\tau = 10$ ns decaying into $q\bar{q}$ and a 100 GeV neutralino, with the observed limit shown as a solid black line. The predicted production cross-section values are shown in purple along with their uncertainty. The expected upper limit in the case of only background is shown by the dashed black line, with a green $\pm 1\sigma$ and a yellow $\pm 2\sigma$ band.

The 95% CL upper limit on the cross-section as a function of mass for stable gluino $R$-hadrons, with the observed limit shown as a solid black line. The predicted production cross-section values are shown in purple along with their uncertainty. The expected upper limit in the case of only background is shown by the dashed black line, with a green $\pm 1\sigma$ and a yellow $\pm 2\sigma$ band.

Observed 95% lower limits on the gluino mass in the gluino lifetime--mass plane. The excluded area is to the left of the curves.

Expected 95% lower limits on the gluino mass in the gluino lifetime--mass plane. The excluded area is to the left of the curves.

The 95% CL upper limit on the cross-section as a function of mass for gluinos with lifetime $\tau = 1$ ns decaying into $q\bar{q}$ and a 100 GeV neutralino, with the observed limit shown as a solid black line. The predicted production cross-section values are shown in purple along with their uncertainty. The expected upper limit in the case of only background is shown by the dashed black line, with a green $\pm 1\sigma$ and a yellow $\pm 2\sigma$ band.

The 95% CL upper limit on the cross-section as a function of mass for gluinos with lifetime $\tau = 3$ ns decaying into $q\bar{q}$ and a 100 GeV neutralino, with the observed limit shown as a solid black line. The predicted production cross-section values are shown in purple along with their uncertainty. The expected upper limit in the case of only background is shown by the dashed black line, with a green $\pm 1\sigma$ and a yellow $\pm 2\sigma$ band.

The 95% CL upper limit on the cross-section as a function of mass for gluinos with lifetime $\tau = 30$ ns decaying into $q\bar{q}$ and a 100 GeV neutralino, with the observed limit shown as a solid black line. The predicted production cross-section values are shown in purple along with their uncertainty. The expected upper limit in the case of only background is shown by the dashed black line, with a green $\pm 1\sigma$ and a yellow $\pm 2\sigma$ band.

The 95% CL upper limit on the cross-section as a function of mass for gluinos with lifetime $\tau = 50$ ns decaying into $q\bar{q}$ and a 100 GeV neutralino, with the observed limit shown as a solid black line. The predicted production cross-section values are shown in purple along with their uncertainty. The expected upper limit in the case of only background is shown by the dashed black line, with a green $\pm 1\sigma$ and a yellow $\pm 2\sigma$ band.

The relationship between generated and reconstructed mass for gluino $R$-hadrons. Above 1500 GeV, the reconstructed mass falls below the generated mass due to bias in the reconstructed momentum. The uncertainty on the reconstructed mass is dominated by momentum uncertainty. The black dots represent the reconstructed mass computed as the most probable value of a Gaussian fit function, with the error bars showing its statistical uncertainty, while the orange band is the full-width at half maximum of the reconstructed mass distribution.

The parameterised efficiency for events to pass metastable event selections (including trigger, E$_{T}^{miss}$, and event cleaning requirements) as a function of the true E$_{T}^{miss}$ in the system, which is calculated at generator level. Event-level efficiencies are evaluated for events which have at least true E$_{T}^{miss} > 50$ GeV. The metastable event efficiencies are evaluated for different radial regions depending on the smallest radial distance, R, at which an R-hadron decays in the detector.

The parameterised efficiency for events to pass metastable event selections (including trigger, E$_{T}^{miss}$, and event cleaning requirements) as a function of the true E$_{T}^{miss}$ in the system, which is calculated at generator level. Event-level efficiencies are evaluated for events which have at least true E$_{T}^{miss} > 50$ GeV. The stable event efficiencies are evaluated for samples in which no R-hadron decays within the detector.

The parameterised efficiency for particles to pass full track selections in the metastable signal region, as function of the particle’s $\beta$, in different bins of transverse momentum, $p_{T}$, and for different radial decay positions of the particle. The efficiency is evaluated for particles which pass a loose set of fiducial requirements at generator level.

The parameterised efficiency for particles to pass full track selections in the metastable signal region, as function of the particle’s $\beta$, in different bins of transverse momentum, $p_{T}$, and for different radial decay positions of the particle. The efficiency is evaluated for particles which pass a loose set of fiducial requirements at generator level.

The parameterised efficiency for particles to pass full track selections in the metastable signal region, as function of the particle’s $\beta$, in different bins of transverse momentum, $p_{T}$, and for different radial decay positions of the particle. The efficiency is evaluated for particles which pass a loose set of fiducial requirements at generator level.

The parameterised efficiency for particles to pass full track selections in the metastable signal region, as function of the particle’s $\beta$, in different bins of transverse momentum, $p_{T}$, and for different radial decay positions of the particle. The efficiency is evaluated for particles which pass a loose set of fiducial requirements at generator level.

The parameterised efficiency for particles to pass full track selections in the metastable signal region, as function of the particle’s $\beta$, in different bins of transverse momentum, $p_{T}$, and for different radial decay positions of the particle. The efficiency is evaluated for particles which pass a loose set of fiducial requirements at generator level.

The parameterised efficiency for particles to pass full track selections in the metastable signal region, as function of the particle’s $\beta$, in different bins of transverse momentum, $p_{T}$. The stable efficiency is evaluated for samples which do not decay within the detector. The efficiency is evaluated for particles which pass a loose set of fiducial requirements at generator level.

The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%

The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%

The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%

The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%

The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%

The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%

The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%

The V2 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%

The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%

The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%

The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%

The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%

The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%

The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%

The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%

The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%

The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%

The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%

The V3 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%

The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%

The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%

The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%

The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%

The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%

The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%

The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%

The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%

The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%

The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%

The V4 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%

The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-0.1%

The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-1%

The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%

The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%

The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%

The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%

The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%

The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%

The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%

The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%

The V5 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%

The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%

The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%

The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%

The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%

The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%

The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%

The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%

The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 60-70%

The V6 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 70-80%

The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 0-5%

The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 5-10%

The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 10-20%

The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 20-30%

The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 30-40%

The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 40-50%

The V7 harmonic measured with the scalar product method as a funtion of transverse momentum in centrality bin 50-60%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 70-80%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 70-80%

The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%

The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%

The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%

The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%

The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%

The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%

The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%

The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%

The V4 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 70-80%

The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%

The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%

The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%

The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%

The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%

The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%

The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%

The V5 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%

The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%

The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 5-10%

The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-20%

The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-30%

The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-40%

The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-50%

The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-60%

The V6 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 60-70%

The ratio of V2{SP} over V2{EP} as a funtion of transverse momentum in centrality bin 0-5%

The ratio of V2{SP} over V2{EP} as a funtion of transverse momentum in centrality bin 20-30%

The ratio of V2{SP} over V2{EP} as a funtion of transverse momentum in centrality bin 40-50%

The ratio of V3{SP} over V3{EP} as a funtion of transverse momentum in centrality bin 0-5%

The ratio of V3{SP} over V3{EP} as a funtion of transverse momentum in centrality bin 20-30%

The ratio of V3{SP} over V3{EP} as a funtion of transverse momentum in centrality bin 40-50%

The ratio of V4{SP} over V4{EP} as a funtion of transverse momentum in centrality bin 0-5%

The ratio of V4{SP} over V4{EP} as a funtion of transverse momentum in centrality bin 20-30%

The ratio of V4{SP} over V4{EP} as a funtion of transverse momentum in centrality bin 40-50%

The ratio of V5{SP} over V5{EP} as a funtion of transverse momentum in centrality bin 0-5%

The ratio of V5{SP} over V5{EP} as a funtion of transverse momentum in centrality bin 20-30%

The ratio of V5{SP} over V5{EP} as a funtion of transverse momentum in centrality bin 40-50%

The ratio of V6{SP} over V6{EP} as a funtion of transverse momentum in centrality bin 0-5%

The ratio of V6{SP} over V6{EP} as a funtion of transverse momentum in centrality bin 20-30%

The ratio of V6{SP} over V6{EP} as a funtion of transverse momentum in centrality bin 40-50%

The ratio of V2{SP} over V2{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The ratio of V3{SP} over V3{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The ratio of V4{SP} over V4{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The ratio of V5{SP} over V5{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The ratio of V6{SP} over V6{EP} as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The ratio of V2{SP} over V2{2PC} as a funtion of transverse momentum in centrality bin 0-5%

The ratio of V2{SP} over V2{2PC} as a funtion of transverse momentum in centrality bin 20-30%

The ratio of V2{SP} over V2{2PC} as a funtion of transverse momentum in centrality bin 40-50%

The ratio of V3{SP} over V3{2PC} as a funtion of transverse momentum in centrality bin 0-5%

The ratio of V3{SP} over V3{2PC} as a funtion of transverse momentum in centrality bin 20-30%

The ratio of V3{SP} over V3{2PC} as a funtion of transverse momentum in centrality bin 40-50%

The ratio of V4{SP} over V4{2PC} as a funtion of transverse momentum in centrality bin 0-5%

The ratio of V4{SP} over V4{2PC} as a funtion of transverse momentum in centrality bin 20-30%

The ratio of V4{SP} over V4{2PC} as a funtion of transverse momentum in centrality bin 40-50%

The ratio of V5{SP} over V5{2PC} as a funtion of transverse momentum in centrality bin 0-5%

The ratio of V5{SP} over V5{2PC} as a funtion of transverse momentum in centrality bin 20-30%

The ratio of V5{SP} over V5{2PC} as a funtion of transverse momentum in centrality bin 40-50%

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.

The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%. PT binning matched to RUN1.

The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%. PT binning matched to RUN1.

The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%. PT binning matched to RUN1.

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%

The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%

The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%

The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%

The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%

The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%

The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%

The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%

The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%

The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%

The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%

The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%

The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%

The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%

The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%

The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%

The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%

The V5 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%

The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%

The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%

The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%

The V6 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%

The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%

The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%

The V7 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%

The V2 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 60-70%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%

The V3 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%

The V4 harmonic measured with the scalar product method as a funtion of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%

The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV

The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV

The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV

The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV

The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV

The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV

The V2 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV

The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV

The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV

The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV

The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV

The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV

The V3 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV

The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV

The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV

The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV

The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV

The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV

The V4 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV

The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV

The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV

The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV

The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV

The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV

The V5 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV

The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV

The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV

The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV

The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV

The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV

The V6 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV

The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV

The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV

The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV

The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV

The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV

The V7 harmonic measured with the scalar product method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-15%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-25%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-35%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-45%

The V2 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-55%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 0-5%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 10-15%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 20-25%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 30-35%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 40-45%

The V3 harmonic measured with the two particle correlation method as a funtion of transverse momentum in centrality bin 50-55%

The scaled-V2(PT) measured with the two particle correlation method in centrality bin 0-5%

The scaled-V2(PT) measured with the two particle correlation method in centrality bin 10-15%

The scaled-V2(PT) measured with the two particle correlation method in centrality bin 20-25%

The scaled-V2(PT) measured with the two particle correlation method in centrality bin 30-35%

The scaled-V2(PT) measured with the two particle correlation method in centrality bin 40-45%

The scaled-V2(PT) measured with the two particle correlation method in centrality bin 50-55%

The scaled-V3(PT) measured with the two particle correlation method in centrality bin 0-5%

The scaled-V3(PT) measured with the two particle correlation method in centrality bin 10-15%

The scaled-V3(PT) measured with the two particle correlation method in centrality bin 20-25%

The scaled-V3(PT) measured with the two particle correlation method in centrality bin 30-35%

The scaled-V3(PT) measured with the two particle correlation method in centrality bin 40-45%

The scaled-V3(PT) measured with the two particle correlation method in centrality bin 50-55%

The PT scale factor for V2(PT) as a funtion of collision centrality

The PT scale factor for V3(PT) as a funtion of collision centrality

The V2 scale factor as a funtion of collision centrality

The V3 scale factor as a funtion of collision centrality

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%

The V2 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%

The V3 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%

The V4 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-0.1%

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-1%

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%

The V5 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%

The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%

The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%

The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%

The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%

The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%

The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%

The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%

The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 60-70%

The V6 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 70-80%

The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 0-5%

The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 5-10%

The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 10-20%

The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 20-30%

The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 30-40%

The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 40-50%

The V7 harmonic measured with the event plane method as a funtion of transverse momentum in centrality bin 50-60%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%

The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-0.1%

The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%

The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%

The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%

The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%

The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%

The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%

The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%

The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 60-70%

The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 0-5%

The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 10-20%

The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 0.8 < PT < 1 GeV in centrality bin 30-40%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%

The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-0.1%

The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%

The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%

The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%

The V5 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%

The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%

The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%

The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%

The V6 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 60-70%

The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 0-5%

The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 10-20%

The V7 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 2 < PT < 3 GeV in centrality bin 30-40%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%

The V2 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 60-70%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%

The V3 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-0.1%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 0-5%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 10-20%

The V4 harmonic measured with the event plane method as a function of pseudorapidity for transverse momentum range 7 < PT < 60 GeV in centrality bin 30-40%

The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV

The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV

The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV

The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV

The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV

The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV

The V2 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV

The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV

The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV

The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV

The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV

The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV

The V3 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV

The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV

The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV

The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV

The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV

The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV

The V4 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV

The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV

The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV

The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV

The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV

The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV

The V5 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV

The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV

The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV

The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV

The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV

The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV

The V6 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 0.8 GeV

The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.8 < PT < 1 GeV

The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 1 < PT < 2 GeV

The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 2 < PT < 4 GeV

The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 4 < PT < 8 GeV

The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 8 < PT < 60 GeV

The V7 harmonic measured with the event plane method as a funtion of MEAN(Npart) integrated over 0.5 < PT < 60 GeV

Expected and observed upper limits on $\tan\beta$ as a function of $m_{H^{+}}$ in the hMSSM scenario of the MSSM. Limits are shown for $\tan\beta$ values in the range of 0.5-60, where predictions are available from both scenarios. The bands surrounding the expected limits show the 68% and 95% confidence intervals. The limits are based on the combination of the $\ell+$jets and $\ell\ell$ final states. The production cross-section of $t\bar{t}H$ and $tH$, as well as the branching ratios of the $H$, are fixed to their SM values at each point in the plane. Uncertainties on the predicted $H^{+}$ cross-sections or branching ratios are not considered.

Expected and observed lower limits on $\tan\beta$ as a function of $m_{H^{+}}$ in the hMSSM scenario of the MSSM. Limits are shown for $\tan\beta$ values in the range of 0.5-60, where predictions are available from both scenarios. The bands surrounding the expected limits show the 68% and 95% confidence intervals. The limits are based on the combination of the $\ell+$jets and $\ell\ell$ final states. The production cross-section of $t\bar{t}H$ and $tH$, as well as the branching ratios of the $H$, are fixed to their SM values at each point in the plane. Uncertainties on the predicted $H^{+}$ cross-sections or branching ratios are not considered.

Distribution of $d_{BV}$ in $\geq$5-track one-vertex events for data and simulated multijet signals with $m$ = 800 GeV, production cross section 1 fb, and $c\tau$ = 0.3, 1.0, and 10 mm. Event preselection and vertex selection criteria have been applied. The last bin includes the overflow events.

Distribution of the distance between vertices in the $x$-$y$ plane in events with two 3-track vertices. The points show the data ($d_{VV}$), and the solid lines show the background template ($d_{VV}^{C}$) normalized to the data. The last bin includes the overflow events. The dotted lines indicate the boundaries between the three bins used in the fit.

Distribution of the distance between vertices in the $x$-$y$ plane in events with one 4-track vertex and one 3-track vertex. The points show the data ($d_{VV}$), and the solid lines show the background template ($d_{VV}^{C}$) normalized to the data. The last bin includes the overflow events. The dotted lines indicate the boundaries between the three bins used in the fit.

Distribution of the distance between vertices in the $x$-$y$ plane in events with two 4-track vertices. The points show the data ($d_{VV}$), and the solid lines show the background template ($d_{VV}^{C}$) normalized to the data. The last bin includes the overflow events. The dotted lines indicate the boundaries between the three bins used in the fit.

Distribution of the distance between vertices in the $x$-$y$ plane in events with two $\geq$5-track vertices. The points show the data ($d_{VV}$), and the solid lines show the background template ($d_{VV}^{C}$) normalized to the data. The last bin includes the overflow events. The dotted lines indicate the boundaries between the three bins used in the fit.

Observed 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of mass and mean proper decay length.

Observed 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of mass and mean proper decay length.

Mass exclusion curves for the multijet signals, assuming gluino pair production cross sections and 100% branching fraction.

Mass exclusion curves for the dijet signals, assuming top squark pair production cross sections and 100% branching fraction.

Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of mass for a fixed $c\tau$ of 0.3 mm. The gluino pair production cross section is overlaid. The uncertainties in the theoretical cross section include those due to the renormalization and factorization scales, and the parton distribution functions.

Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of mass for a fixed $c\tau$ of 0.3 mm. The top squark pair production cross section is overlaid. The uncertainties in the theoretical cross section include those due to the renormalization and factorization scales, and the parton distribution functions.

Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of mass for a fixed $c\tau$ of 1.0 mm. The gluino pair production cross section is overlaid. The uncertainties in the theoretical cross section include those due to the renormalization and factorization scales, and the parton distribution functions.

Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of mass for a fixed $c\tau$ of 1.0 mm. The top squark pair production cross section is overlaid. The uncertainties in the theoretical cross section include those due to the renormalization and factorization scales, and the parton distribution functions.

Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of mass for a fixed $c\tau$ of 10 mm. The gluino pair production cross section is overlaid. The uncertainties in the theoretical cross section include those due to the renormalization and factorization scales, and the parton distribution functions.

Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of mass for a fixed $c\tau$ of 10 mm. The top squark pair production cross section is overlaid. The uncertainties in the theoretical cross section include those due to the renormalization and factorization scales, and the parton distribution functions.

Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of $c\tau$ for a fixed mass of 800 GeV.

Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of $c\tau$ for a fixed mass of 800 GeV.

Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of $c\tau$ for a fixed mass of 1600 GeV.

Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of $c\tau$ for a fixed mass of 1600 GeV.

Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the multijet signals as a function of $c\tau$ for a fixed mass of 2400 GeV.

Observed and expected 95% C.L. upper limits on $\sigma\mathcal{B}^2$ for the dijet signals as a function of $c\tau$ for a fixed mass of 2400 GeV.

Resolved search distribution of average dijet mass for the data, along with the resulting fit to the functional form for the inclusive selection

Resolved search distribution of average dijet mass for the data, along with the resulting fit to the functional form for the b-tagged selection

Signal efficiency as a function of stop mass for the inclusive and b-tagged selections. Efficiency is estimated from the number of events in the simulated sample passing the full signal selection in a two sigma window around the true mass compared with the total number of events generated. No generator-level requirements are applied in the generation.

Observed and expected 95% CL upper limits on the signal cross section as a function of stop mass. The branching fraction to quarks is assumed to be 100%. The boosted analysis probes 80 <= stop mass <= 400 GeV, while the resolved analysis searches for stop masses >= 400 GeV. Limits using the inclusive selection for stop to qq' assuming the RPV coupling lambda''. Theory cross sections correspond to the values agreed upon in the LHC SUSY cross section group.

Observed and expected 95% CL upper limits on the signal cross section as a function of stop mass. The branching fraction to quarks is assumed to be 100%. The boosted analysis probes 80 <= stop mass <= 400 GeV, while the resolved analysis searches for stop masses >= 400 GeV. Limits using the inclusive selection for stop to qq' assuming the RPV coupling lambda''. Theory cross sections correspond to the values agreed upon in the LHC SUSY cross section group.

Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 900 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 950 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1000 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1050 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1100 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1150 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1200 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1300 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like top quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1400 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 800 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 900 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 950 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1000 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1050 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1100 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1150 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1200 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1300 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% upper limits on the vector-like bottom quark pair-production signal strength (i.e. the ratio sigma_exclusion/sigma_VLQ) as a function of the branching ratio for a vector-like quark mass of 1400 GeV, asumming that the vector-like quarks exclusively decay to SM particles (and third generation quarks). If interpreting these results in models with decays to non-Standard-Model particles, one must check that the additional decays will not end up in any control regions of the relevant analyses.

Expected and observed 95% CL lower limits on the mass of a vector-like $T$ quark in the branching-ratio plane.

Expected and observed 95% CL lower limits on the mass of a vector-like $B$ quark in the branching-ratio plane.

Expected and observed upper limits at the 95% CL on the $T\bar T$ cross section as a function of $T$ mass under the assumption BR($T\to Wb$)=1.

Expected and observed upper limits at the 95% CL on the $B\bar B$ cross section as a function of $B$ mass under the assumption BR($T\to Zt$)=1.

Expected and observed upper limits at the 95% CL on the $B\bar B$ cross section as a function of $B$ mass under the assumption BR($B\to Wt$)=1.

Expected and observed upper limits at the 95% CL on the $B\bar B$ cross section as a function of $B$ mass under the assumption BR($B\to Zb$)=1.

Observed 95% CL upper limits on the product of the production cross section and the branching fraction for a new spin-1 Z prime resonance decaying to ZH, as a function of the resonance mass hypothesis.

Observed 95% CL upper limits on the product of the production cross section and the branching fraction for a new spin-1 V prime (Wprime/Zprime) resonance decaying to VH, as a function of the resonance mass hypothesis.