Date

Energy dependence of the Lambda/Sigma0 production cross section ratio in p p interactions.

Kowina, P. ; Wolke, M. ; Adam, H.H. ; et al.
Eur.Phys.J.A 22 (2004) 293-299, 2004.
Inspire Record 644074 DOI 10.17182/hepdata.31762

The production of the Lambda and Sigma0 hyperons has been measured via the pp->pK+Lambda / Sigma0 reaction at the internal COSY-11 facility in the excess energy range between 14 and 60 MeV. The transition of the Lambda/Sigma0 cross section ratio from about 28 at Q<=13 MeV to the high energy level of about 2.5 is covered by the data showing a strong decrease of the ratio between 10 and 20 MeV excess energy. Effects from the final state interactions in the p-Sigma0 channel seem to be much smaller compared to the p-Lambda one. Estimates of the effective range parameters are given for the N-Lambda and the N-Sigma systems.

3 data tables match query

Cross section for LAMBDA production.. Statistical errors only.

Cross section for SIGMA0 production.. Statistical errors only.

Energy dependence of the LAMBDA/SIGMA0 ratio.


Near-threshold eta meson production in proton proton collisions.

Smyrski, J. ; Wüstner, P. ; Balewski, J.T. ; et al.
Phys.Lett.B 474 (2000) 182-187, 2000.
Inspire Record 512406 DOI 10.17182/hepdata.28056

The production of eta mesons has been measured in the proton-proton interaction close to the reaction threshold using the COSY-11 internal facility at the cooler synchrotron COSY. Total cross sections were determined for eight different excess energies in the range from 0.5 MeV to 5.4 MeV. The energy dependence of the total cross section is well described by the available phase-space volume weighted by FSI factors for the proton-proton and proton-eta pairs.

1 data table match query

The total cross sections as a function of beam momentum and excess energy with statistical errors. The uncertainty on the beam momentum and excess energy are +- 0.00080 GeV and +- 0.28 MeV respectively.


eta' production in proton proton scattering close to threshold.

Moskal, P. ; Balewski, J.T. ; Budzanowski, A. ; et al.
Phys.Rev.Lett. 80 (1998) 3202-3205, 1998.
Inspire Record 467809 DOI 10.17182/hepdata.42086

The $pp \to pp \eta^{\prime}$ (958) reaction has been measured at COSY using the internal beam and the COSY-11 facility. The total cross sections at the four different excess energies \mbox{$ Q = ~1.5 ~MeV, ~1.7 ~MeV, ~2.9 ~MeV,$ and $ ~4.1 MeV$} have been evaluated to be \mbox{$ \sigma = 2.5 \pm 0.5~nb$, $~~~ 2.9 \pm 1.1~nb$, $~~~ 12.7 \pm 3.2~nb$, ~ and $~~~ 25.2 \pm 3.6 ~nb $}, respectively. In this region of excess energy the $\eta^{\prime}$ (958) cross sections are much lower compared to those of the $\pi ^0$ and $\eta$ production.

1 data table match query

Only statistical errors are presented in the table.


Threshold measurements at the internal experimental facility COSY-11

Balewski, J. ; Brauksiepe, S. ; Budzanowski, A. ; et al.
Nucl.Phys.A 626 (1997) 85C-92C, 1997.
Inspire Record 463151 DOI 10.17182/hepdata.36361

The experimental setup and detection technique of the COSY-11 installation, an internal experimental facility at the cooler synchrotron and storage ring COSY Jülich, are described. The detection system has been designed for meson production studies with full geometrical acceptance close to threshold. Preliminary results of first measurements are presented, emphasis is put on strangeness production in the reactions pp → ppK + K − and pp → pK + Λ .

2 data tables match query

Excess energy of 6.1 MeV above threshold 3.3016 GeV.

Excess energy of 2 MeV above threshold 2.339 GeV.


Analysing power A(y) in the reaction p(pol.) p --> p p eta close to threshold.

Winter, P. ; Adam, H.H. ; Bauer, F. ; et al.
Phys.Lett.B 544 (2002) 251-258, 2002.
Inspire Record 599591 DOI 10.17182/hepdata.31686

Measurements of the eta meson production with a polarised proton beam in the reaction p(pol) p --> p p eta have been carried out at an excess energy of Q = 40 MeV. The dependence of the analysing power A_y on the polar angle theta^*_q of the eta meson in the center of mass system (CMS) has been studied. The data indicate the possibility of an influence of p- and d-waves to the close to threshold eta production.

1 data table match query

Averaged value of the analyzing power and cross section as a function of the emmission angle of the ETA meson is the CM system.


Comparison of Lambda and Sigma0 threshold production in proton proton collisions.

Sewerin, S. ; Schepers, G. ; Balewski, J.T. ; et al.
Phys.Rev.Lett. 83 (1999) 682-685, 1999.
Inspire Record 478929 DOI 10.17182/hepdata.42059

Threshold measurements of the associated strangeness production reactions pp --> p K(+) Lambda and pp --> p K(+) Sigma(0) are presented. Although slight differences in the shapes of the excitation functions are observed, the most remarkable feature of the data is that at the same excess energy the total cross section for the Sigma(0) production appears to be about a factor of 28 smaller than the one for the Lambda particle. It is concluded that strong Sigma(0)-p final state interactions, and in particular the Sigma-N --> Lambda-p conversion reaction, are the likely cause of the depletion for the yield in the Sigma signal. This hypothesis is in line with other experimental evidence in the literature.

1 data table match query

The given errors are statistical only. The cross section presented as a function of the nominal excess energy.


Total and differential cross sections for the p p --> p p eta' reaction near threshold.

Khoukaz, A. ; Geck, I. ; Quentmeier, C. ; et al.
Eur.Phys.J.A 20 (2004) 345-350, 2004.
Inspire Record 642580 DOI 10.17182/hepdata.43699

The eta-prime meson production in the reaction pp-->pp eta-prime has been studied at excess energies of Q = 26.5, 32.5 and 46.6 MeV using the internal beam facility COSY-11 at the cooler synchrotron COSY. The total cross sections as well as one angular distribution for the highest Q-value are presented. The excitation function of the near threshold data can be described by a pure s-wave phase space distribution with the inclusion of the proton-proton final state interaction and Coulomb effects. The obtained angular distribution of the eta-prime mesons is also consistent with pure s-wave production.

2 data tables match query

Total cross section for the reaction P P --> P P ETAPRIME.

Angular distribution of the ETAPRIME in the CM system at an excess energy of 46.6 MeV. There is an additional systematic error of +24%/-35%.


Total cross section of the reaction p p --> p K+ Lambda close to threshold.

Balewski, J.T. ; Budzanowski, A. ; Dombrowski, H. ; et al.
Phys.Lett.B 420 (1998) 211-216, 1998.
Inspire Record 467810 DOI 10.17182/hepdata.42045

The energy dependence of the total cross section for the pp \to pK^+\Lambda reaction was measured in the threshold region covering the excess energy range up to 7MeV. Existing model calculations describe the slope of the measured cross sections well, but are too low by a factor of two to three in rate. The data were used for a precise determination of the beam momentum of the COSY-synchrotron.

1 data table match query

Only statistical errors are presented in the table.


Energy dependence of the near-threshold total cross-section for the p p --> p p eta' reaction.

Moskal, P. ; Adam, H.H. ; Balewski, J.T. ; et al.
Phys.Lett.B 474 (2000) 416-422, 2000.
Inspire Record 522744 DOI 10.17182/hepdata.28036

Total cross sections for the pp --> pp eta' reaction have been measured in the excess energy range from Q = 1.53 MeV to Q = 23.64 MeV. The experiment has been performed at the internal installation COSY-11 using a stochastically cooled proton beam of the COoler SYnchrotron COSY and a hydrogen cluster target. The determined energy dependence of the total cross section weakens the hypothesis of the S-wave repulsive interaction between the eta' meson and the proton. New data agree well with predictions based on the phase-space distribution modified by the proton-proton final-state-interaction (FSI) only.

1 data table match query

Total cross sections w.r.t the excess energy in the CM system. Statistical errors only are given. As well as the 15 PCT overall systematic uncertainty there is an uncertainty on the energy of 0.44 MeV.


Measurement of $J/\psi$ at forward and backward rapidity in $p+p$, $p+A$l, $p+A$u, and $^3$He$+$Au collisions at $\sqrt{s_{_{NN}}}=200~{\rm GeV}$

The PHENIX collaboration Acharya, U. ; Adare, A. ; Aidala, C. ; et al.
Phys.Rev.C 102 (2020) 014902, 2020.
Inspire Record 1762446 DOI 10.17182/hepdata.98626

Charmonium is a valuable probe in heavy-ion collisions to study the properties of the quark gluon plasma, and is also an interesting probe in small collision systems to study cold nuclear matter effects, which are also present in large collision systems. With the recent observations of collective behavior of produced particles in small system collisions, measurements of the modification of charmonium in small systems have become increasingly relevant. We present the results of J/ψ measurements at forward and backward rapidity in various small collision systems, p+p, p+Al, p+Au and 3He+Au, at √sNN =200 GeV. The results are presented in the form of the observable RAB, the nuclear modification factor, a measure of the ratio of the J/ψ invariant yield compared to the scaled yield in p+p collisions. We examine the rapidity, transverse momentum, and collision centrality dependence of nuclear effects on J/ψ production with different projectile sizes p and 3He, and different target sizes Al and Au. The modification is found to be strongly dependent on the target size, but to be very similar for p+Au and 3He+Au. However, for 0%–20% central collisions at backward rapidity, the modification for 3He+Au is found to be smaller than that for p+Au, with a mean fit to the ratio of 0.89±0.03(stat)±0.08(syst), possibly indicating final state effects due to the larger projectile size.

1 data table match query

J/psi nuclear modification in p+Au collisions as a function of nuclear thickness (T_A). The statistical and systematic uncertainties vary point-to-point and are listed for each measured value. An additional global systematic uncertainty is provided in each column heading, which applies to all data points per column.