Pre-fit comparison between data and background in the baseline SR for two of the variables used as input for the BSM pBDT: HT.

Data and post-fit background comparison for the distributions of the discriminant variables fitted in the control regions obtained with the background-only fit: CR HF e.

Data and post-fit background comparison for the distributions of the discriminant variables fitted in the control regions obtained with the background-only fit: CR HF mu.

Data and post-fit background comparison for the distributions of the discriminant variables fitted in the control regions obtained with the background-only fit: CR Conv.

Data and post-fit background comparison for the distributions of the discriminant variables fitted in the control regions obtained with the background-only fit: CR ttW.

Data and post-fit background comparison for the distributions of the discriminant variables fitted in the control regions obtained with the background-only fit: CR lowBDT.

Data and post-fit background comparison obtained with the background-only fit in the validation region defined for ttW+jets events: number of jets.

Data and post-fit background comparison obtained with the background-only fit in the validation region defined for ttW+jets events: SM BDT.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 400 GeV.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 1000 GeV.

Observed (black solid line) and expected (black dashed line) 95% CL upper limits on the ttH/A cross-section times branching fraction of H/A->tt as a function of mH/A.

Observed (red line) and expected (black dashed line) exclusion regions at 95% CL in the tan(beta) versus mass plane assuming that both, a heavy scalar H and pseudo-scalar A, contribute to the tttt final state and have the same mass mH=mA.

Observed (red line) and expected (black dashed line) exclusion regions at 95% CL in the tan(beta) versus mass plane assuming that only the scalar H contributes to the tttt final state.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 500 GeV.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 600 GeV.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 700 GeV.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 800 GeV.

Data and post-fit background comparison obtained with the background-only fit to the BSM SR for the BSM pBDT distribution used for mH = 900 GeV.

Observed (red line) and expected (black dashed line) exclusion regions at 95% CL in the tan(beta) versus mass plane assuming that only the pseudo-scalar A contributes to the tttt final state.

The product of acceptance and efficiency (A×ε), defined as the number of signal events satisfying the full set of selection criteria of the BSM SR, divided by the total number of generated signal events, for the tt̄H(→ tt̄ ) process in a type-II 2HDM for tanβ = 1 for the different heavy Higgs mass hypotheses.

Observed 95% CL limits on the production cross-section for scalar up-type LQs decaying into a top quark and a neutrino or a bottom quark and an electron.

Expected 95% CL limits on the production cross-section for scalar up-type LQs decaying into a top quark and a neutrino or a bottom quark and an electron.

Observed 95% CL limits on the production cross-section for scalar down-type LQs decaying into a bottom quark and a neutrino or a top quark and a muon.

Expected 95% CL limits on the production cross-section for scalar down-type LQs decaying into a bottom quark and a neutrino or a top quark and a muon.

Observed 95% CL limits on the production cross-section for scalar down-type LQs decaying into a bottom quark and a neutrino or a top quark and an electron.

Expected 95% CL limits on the production cross-section for scalar down-type LQs decaying into a bottom quark and a neutrino or a top quark and an electron.

Observed 95% CL limits on the production cross-section for vector up-type LQs in the Yang-Mills coupling scenario decaying into a top quark and a neutrino or a bottom quark and a muon.

Expected 95% CL limits on the production cross-section for vector up-type LQs in the Yang-Mills coupling scenario decaying into a top quark and a neutrino or a bottom quark and a muon.

Observed 95% CL limits on the production cross-section for vector up-type LQs in the Yang-Mills coupling scenario decaying into a top quark and a neutrino or a bottom quark and an electron.

Expected 95% CL limits on the production cross-section for vector up-type LQs in the Yang-Mills coupling scenario decaying into a top quark and a neutrino or a bottom quark and an electron.

Observed 95% CL limits on the production cross-section for vector up-type LQs in the minimal coupling scenario decaying into a top quark and a neutrino or a bottom quark and a muon.

Expected 95% CL limits on the production cross-section for vector up-type LQs in the minimal coupling scenario decaying into a top quark and a neutrino or a bottom quark and a muon.

Observed 95% CL limits on the production cross-section for vector up-type LQs in the minimal coupling scenario decaying into a top quark and a neutrino or a bottom quark and an electron.

Expected 95% CL limits on the production cross-section for vector up-type LQs in the minimal coupling scenario decaying into a top quark and a neutrino or a bottom quark and an electron.

Product of signal acceptance and efficiency in the training region for scalar up-type LQs decaying into top quarks and neutrinos or bottom quarks and muons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(LQ_{mix}^u\rightarrow b\mu)$.

Product of signal acceptance and efficiency in the training region for scalar up-type LQs decaying into top quarks and neutrinos or bottom quarks and electrons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(LQ_{mix}^u\rightarrow be)$.

Product of signal acceptance and efficiency in the training region for scalar down-type LQs decaying into top quarks and muons or bottom quarks and neutrinos depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(LQ_{mix}^d\rightarrow t\mu)$.

Product of signal acceptance and efficiency in the training region for scalar down-type LQs decaying into top quarks and electrons or bottom quarks and neutrinos depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(LQ_{mix}^d\rightarrow te)$.

Product of signal acceptance and efficiency in the training region for vector LQs in the Yang-Mills coupling scenario decaying into top quarks and neutrinos or bottom quarks and muons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(vLQ_{mix}^{YM}\rightarrow b\mu)$.

Product of signal acceptance and efficiency in the training region for vector LQs in the Yang-Mills coupling scenario decaying into top quarks and neutrinos or bottom quarks and electrons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(vLQ_{mix}^{YM}\rightarrow be)$.

Product of signal acceptance and efficiency in the training region for vector LQs in the minimal coupling scenario decaying into top quarks and neutrinos or bottom quarks and muons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(vLQ_{mix}^{min}\rightarrow b\mu)$.

Product of signal acceptance and efficiency in the training region for vector LQs in the minimal coupling scenario decaying into top quarks and neutrinos or bottom quarks and electrons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(vLQ_{mix}^{min}\rightarrow be)$.

Cut-flow for the four models containing scalar LQs at a mass of $m_{LQ}=1300$ GeV and $\mathcal{B}(LQ_{mix}\rightarrow q_3\ell)=0.5$.

Cut-flow for the four models containing vector LQs at a mass of $m_{LQ}=1300$ GeV and $\mathcal{B}(LQ_{mix}\rightarrow q_3\ell)=0.5$.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-0J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[100,105)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[105,110)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[110,115)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[115,120)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[120,125)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[125,130)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[130,140)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the slepton pair production model, in the SR-1J $m_{\mathrm{T2}}^{100} \in[140,\infty)$ region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

Cutflow table for the slepton signal sample with $m(\tilde{\ell},\tilde{\chi}_1^0) = (100,70)$ GeV, in the SR-0J $m_{\mathrm{T2}}^{100} \in [100,\infty)$ region. The yields include the process cross section and are weighted to the 139 fb$^{-1}$ luminosity. 246000 events were generated for the sample.

Cutflow table for the slepton signal sample with $m(\tilde{\ell},\tilde{\chi}_1^0) = (100,70)$ GeV, in the SR-1J $m_{\mathrm{T2}}^{100} \in [100,\infty)$ region. The yields include the process cross section and are weighted to the 139 fb$^{-1}$ luminosity. 246000 events were generated for the sample.

Observed and expected exclusion limits on SUSY simplified models, with observed upper limits on signal cross-section (fb) overlaid, for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the (a) $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\ell})-\Delta m(\tilde{\ell},\tilde{\chi}_1^0)$ planes. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP for $\tilde{\mu}_{\textup{R}}$ and by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for direct selectron production in the (a) $m(\tilde{e})-m(\tilde{\chi}_1^0)$ and (c) $m(\tilde{e})-\Delta m(\tilde{e},\tilde{\chi}_1^0)$ planes, and for direct smuon production in the (b) $m(\tilde{\mu})-m(\tilde{\chi}_1^0)$ and (d) $m(\tilde{\mu})-\Delta m(\tilde{\mu},\tilde{\chi}_1^0)$ planes. In Figure (a) and (c) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{e}_{\textup{L,R}}$ and for $\tilde{e}_{\textup{L}}$ and $\tilde{e}_{\textup{R}}$. In Figure (b) and (d) the observed (solid thick lines) and expected (dashed lines) exclusion contours are indicated for combined $\tilde{\mu}_{\textup{L,R}}$ and for $\tilde{\mu}_{\textup{L}}$. No unique sensitivity to $\tilde{\mu}_{\textup{R}}$ is observed. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown in the shaded areas.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.

Observed and expected exclusion limits on SUSY simplified models for slepton-pair production in the $m(\tilde{\ell})-m(\tilde{\chi}_1^0)$ plane. Only $\tilde{e}$ and $\tilde{\mu}$ are considered. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The red contour shows the exclusion limits obtained using both the SR-0J and SR-1J region, as presented in Figure 6. The blue and green contours correspond to the result obtained considering only SR-0J and SR-1J region respectively. All limits are computed at 95% CL. The observed limits obtained by the ATLAS experiment in previous searches are also shown.

The upper panel shows the observed number of events in each of the binned SRs defined in Table 3, together with the expected SM backgrounds obtained after applying the efficiency correction method to compute the number of expected FSB events. `Others' include the non-dominant background sources, e.g. $t \bar{t}$+$V$, Higgs boson and Drell--Yan events. The uncertainty band includes systematic and statistical errors from all sources. The distributions of two signal points with mass splittings $\Delta m(\tilde{\ell},\tilde{\chi}_1^0) = m(\tilde{\ell})-m(\tilde{\chi}_1^0) = 30$ GeV and $\Delta m(\tilde{\ell},\tilde{\chi}_1^0) = m(\tilde{\ell})-m(\tilde{\chi}_1^0) = 50$ GeV are overlaid. The lower panel shows the significance as defined in Ref. [115].

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR$^{\text{-DF BDT-signal}\in(0.81,1]}_{\text{-SF BDT-signal}\in(0.77,1]}$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR$^{\text{-DF BDT-signal}\in(0.81,1]}_{\text{-SF BDT-signal}\in(0.77,1]}$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,0.8125]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.81,0.8125]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8125,0.815]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8125,0.815]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.815,0.8175]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.815,0.8175]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8175,0.82]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8175,0.82]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,0.8225]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.82,0.8225]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8225,0.825]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8225,0.825]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.825,0.8275]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.825,0.8275]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8275,0.83]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8275,0.83]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,0.8325]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.83,0.8325]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8325,0.835]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8325,0.835]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.835,0.8375]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.835,0.8375]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8375,0.84]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.8375,0.84]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,0.845]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.84,0.845]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.845,0.85]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.845,0.85]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,0.86]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.85,0.86]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.86,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-DF BDT-signal$\in(0.86,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,0.775]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.77,0.775]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.775,0.78]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.775,0.78]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,0.785]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.78,0.785]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.785,0.79]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.785,0.79]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,0.795]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.79,0.795]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.795,0.80]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.795,0.80]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,0.81]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.80,0.81]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

The figure shows the signal acceptance (a) and efficiency (b) plots for the $\tilde{\chi}_1^+\tilde{\chi}_1^-$ production with $W$-boson-mediated decay model, in the SR-SF BDT-signal$\in(0.81,1]$ inclusive region. Acceptance is calculated by applying the signal region requirements to particle-level objects, which do not suffer from identification inefficiencies or mismeasurements. The efficiency is calculated with fully reconstructed objects with the acceptance divided out. Large acceptance and efficiency differences in neighbouring points are due to statistical fluctuations.

Cutflow table for the chargino signal sample with $m\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0=(125,25)$ GeV, in the SR-SF BDT-signal$\in (0.77,1]$ and SR-DF BDT-signal$\in (0.81,1]$ regions. The yields include the process cross-section and are weighted to the 139 fb$^{-1}$ luminosity. 170000 events were generated for the sample.

Observed and expected exclusion limits on SUSY simplified models, with observed upper limits on signal cross-section (fb) overlaid, for chargino-pair production with $W$-boson-mediated decays in the $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ plane. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

Observed and expected exclusion limits on SUSY simplified models for chargino-pair production with $W$-boson-mediated decays in the (a) $m(\tilde{\chi}_1^{\pm})-m(\tilde{\chi}_1^0)$ and (b) $m(\tilde{\chi}_1^{\pm})-\Delta m(\tilde{\chi}_1^{\pm},\tilde{\chi}_1^0)$ planes. The observed (solid thick line) and expected (thin dashed line) exclusion contours are indicated. The shaded band around the dashed line corresponds to the $\pm 1 \sigma$ variations in the expected limit, including all uncertainties except theoretical uncertainties in the signal cross-section. The dotted lines around the observed limit illustrate the change in the observed limit as the nominal signal cross-section is scaled up and down by the theoretical uncertainty. All limits are computed at 95% CL. The observed limits obtained at LEP and by the ATLAS experiment in previous searches are also shown. In case of the search performed on ATLAS Run 1 data at $\sqrt{s} = 8$ TeV no sensitivity was expected for the exclusion in the mass plane.

The upper panel shows the observed number of events in the SRs defined in Table 3, together with the expected SM backgrounds obtained after the background fit in the CRs. `Others' include the non-dominant background sources, e.g.$t \bar{t}$+$V$, Higgs boson and Drell--Yan events. The uncertainty band includes systematic and statistical errors from all sources. Distributions for three benchmark signal points are overlaid for comparison. The lower panel shows the significance as defined in Ref. [115].

Cumulative efficiency for simulated signal events to pass each stage of the event selection in the hadhad category. The efficiencies are calculated with respect to HH to bbtautau decays in which both tau-leptons decay hadronically. The ‘Pre-selection’ consists of basic requirements, including that at least two tau-had-vis pass loose kinematic requirements, at least one of the tau-had-vis candidate passes identification requirement, and that events do not contain an electron or muon. The ‘Object selections’ require exactly two tau-had-vis candidates, and at least two jets with pT > 25 GeV and abs(eta) < 2.5. The ‘Loose tau ID’ requires that both tau-had-vis candidates pass identification requirements. The ‘DTT offline jet cuts’ are cuts placed on the pT of the reconstructed jet or tau-had-vis that are geometrically matched to the HLT objects, to ensure the efficiencies of the HLT objects reach the plateau region.

Cumulative efficiency for simulated signal events to pass each stage of the event selection in the lephad SLT category. The efficiencies are calculated with respect to HH to bbtautau decays in which one tau-lepton decays hadronically and one decays leptonically. The ‘Pre-selection’ consists of basic requirements, including that at least one tau-had-vis candidate and one lepton pass loose kinematic requirements. The ‘Object selections’ require exactly one tau-had-vis candidate, and at least two jets with pT > 25 GeV and abs(eta) < 2.5. The ‘Trigger specific offline pT cuts’ are cuts placed on the pT of the reconstructed jet or tau-had-vis that are geometrically matched to the HLT objects, to ensure the efficiencies of the HLT objects reach the plateau region.

Cumulative efficiency for simulated signal events to pass each stage of the event selection in the lephad LTT category. The efficiencies are calculated with respect to HH to bbtautau decays in which one tau-lepton decays hadronically and one decays leptonically. The ‘Pre-selection’ consists of basic requirements, including that at least one tau-had-vis candidate and one lepton pass loose kinematic requirements. The ‘Object selections’ require exactly one tau-had-vis candidate, and at least two jets with pT > 25 GeV and abs(eta) < 2.5. The ‘Trigger specific offline pT cuts’ are cuts placed on the pT of the reconstructed jet or tau-had-vis that are geometrically matched to the HLT objects, to ensure the efficiencies of the HLT objects reach the plateau region.

Post-fit expected number of signal and background events and observed number of data events after applying the selection criteria and requiring exactly 2 b-tagged jets and assuming a background-only hypothesis.

Observed and expected limits at 95% CL on the cross-section of HH production, for the non-resonant ggF+VBF HH search, and the resonant HH search for four values of the resonance mass mX.

Acceptance times efficiency for the full analysis selections as a function of the resonance mass mX in the hadhad, lephad SLT and lephad LTT trigger categories, and the combined lephad. The acceptance times efficiency is evaluated for HH to bbtautau decays, with respect to the targeted tau-lepton decay modes (lephad or hadhad).

Post-fit distribution of mHH in the hadhad channel.

Post-fit distribution of mHH in the lephad SLT channel.

Post-fit distribution of mHH in the lephad LTT channel.

Post-fit distribution of mtautau MMC in the hadhad channel.

Post-fit distribution of mtautau MMC in the hadhad channel.

Post-fit distribution of mtautau MMC in the hadhad channel.

Post-fit distribution of of di-b-jet mass in the hadhad channel.

Post-fit distribution of di-b-jet mass in the LTT lephad channel.

Post-fit distribution of di-b-jet mass in the LTT lephad channel.

BDT for SM HH in the hadhad channel

NN for SM HH in the lephad SLT channel

NN for SM HH in the lephad LTT channel

PNN for mX = 500 GeV resonant HH in the hadhad channel

PNN for mX = 500 GeV resonant HH in the lephad SLT channel

PNN for mX = 500 GeV resonant HH in the lephad LTT channel

PNN for mX = 1000 GeV resonant HH in the hadhad channel

PNN for mX = 1000 GeV resonant HH in the lephad SLT channel

PNN for mX = 1000 GeV resonant HH in the lephad LTT channel

Event yields as a function of log10(S/B) for data, background and non-resonant HH signal. Final discriminant bins from the hadhad, lephad SLT and lephad LTT categories are combined into bins of log10(S/B). The B is the fitted background yield assuming background-only hypothesis, and the signal S is scaled to the SM expected cross-section.

Observed and expected limits at 95% CL on the cross-section of the resonant HH production as a function of the scalar resonance mass mX.

Post-fit distribution of delta-R between the taus in the hadhad channel.

Post-fit distribution of delta-R between the b-tagged jets in the hadhad channel.

Post-fit distribution of delta-R between the taus in the lephad SLT channel.

Post-fit distribution of delta-R between the b-tagged jets in the lephad SLT channel.

Post-fit distribution of delta-pT between the tau and lepton in the lephad SLT channel.

Post-fit distribution of pT of the subleading b-tagged jet in the lephad SLT channel.

Post-fit distribution of MTW in the lephad SLT channel.

Post-fit distribution of missing transverse momentum in the lephad SLT channel.

Post-fit distribution of missing transverse momentum centrality in the lephad SLT channel.

Post-fit distribution of delta-phi between the Higgs boson candidates in the lephad SLT channel.

Post-fit distribution of delta-pT between the tau and lepton in the lephad LTT channel.

Post-fit distribution of delta-R between the taus in the lephad LTT channel.

Post-fit distribution of delta-phi between the lepton and the missing transverse momentum in the lephad LTT channel.

Post-fit distribution of delta-phi between the Higgs boson candidates in the lephad LTT channel.

Post-fit distribution of the total transverse momentum s in the lephad LTT channel.

PNN for mX = 300 GeV resonant HH in the hadhad channel

PNN for mX = 300 GeV resonant HH in the lephad SLT channel

PNN for mX = 300 GeV resonant HH in the lephad LTT channel

PNN for mX = 1600 GeV resonant HH in the hadhad channel

PNN for mX = 1600 GeV resonant HH in the lephad SLT channel

PNN for mX = 1600 GeV resonant HH in the lephad LTT channel

Local p-value of the background-only hypothesis as a function of the resonance mass.

Distribution of ${E}_{T}^{miss}$ after the fit of the multijet backgrounds, in the electron channel, in the $t\bar{t}$ 3-jets VR, without applying the cut on ${E}_{T}^{miss}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of ${E}_{T}^{miss}$ after the fit of the multijet backgrounds, in the electron channel, in the $t\bar{t}$ 4-jets VR, without applying the cut on ${E}_{T}^{miss}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the signal region, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the $W$+jets VR, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the $t\bar{t}$ 3-jets VR, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Distribution of $m_{T}^{W}$ after the fit of the multijet backgrounds, in the muon channel, in the $t\bar{t}$ 4-jets VR, without applying the cut on $m_{T}^{W}$. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit. The last bin includes the overflow. The uncertainty band indicates the simulation's statistical uncertainty, the normalisation uncertainties for different processes ($40$ % for $W$+jets production, $30$ % for multijet background and $6$ % for top-quark processes) and the multijet background shape uncertainty in each bin, summed in quadrature. The lower panel of the figure shows the ratio of the data to the prediction.

Expected distributions of the MEM discriminant $P(S|X)$ in the SR, for the s-channel single-top signal, and for the $t\bar{t}$ and $W$+jets backgrounds, for MEM discriminant values larger than $2.0\times10^{-4}$. Each distribution is normalised to unity. The binning is the same as the optimised binning used in the signal extraction fit, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the $W$+jets VR. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit presented in Section 5 in the paper. The uncertainty band indicates the simulation's statistical uncertainty and the normalisation uncertainties for the various processes in each bin, summed in quadrature. The ratio of the observed number to the predicted number of events in each bin is shown in the lower panel of the figure, with different vertical axis ranges. The binning is the same as the optimised binning used in the signal extraction fit described in Section 8 in the paper, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the $t\bar{t}$ 3-jets VR. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit presented in Section 5 in the paper. The uncertainty band indicates the simulation's statistical uncertainty and the normalisation uncertainties for the various processes in each bin, summed in quadrature. The ratio of the observed number to the predicted number of events in each bin is shown in the lower panel of the figure, with different vertical axis ranges. The binning is the same as the optimised binning used in the signal extraction fit described in Section 8 in the paper, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the $t\bar{t}$ 4-jets VR. Simulated events are normalised to the expected number of events given the integrated luminosity, after applying the normalisation factors obtained in the multijet fit presented in Section 5 in the paper. The uncertainty bands indicate the simulation's statistical uncertainty and the normalisation uncertainties for the various processes in each bin, summed in quadrature. The ratio of the observed number to the predicted number of events in each bin is shown in the lower panel of the figure, with different vertical axis ranges. The binning is the same as the optimised binning used in the signal extraction fit described in Section 8 in the paper, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the SR before the fit to data, for MEM discriminant values larger than $2.0\times10^{-4}$. The lower panel of the figure shows the ratio of the data to the prediction, with different vertical axis ranges. The uncertainty band indicates the total uncertainties and their correlations in each bin. The uncertainties in the $t\bar{t}$ and $W$+jets normalisation factors, as well as in the s-channel signal cross-section, are not defined pre-fit and therefore not included. The binning is the same as the optimised binning used in the fit, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the SR after the fit to data, for MEM discriminant values larger than $2.0\times10^{-4}$. The lower panel of the figure shows the ratio of the data to the prediction, with different vertical axis ranges. The uncertainty band indicates the total uncertainties and their correlations in each bin. The binning is the same as the optimised binning used in the fit, resulting in a non-linear horizontal scale.

Distribution of the MEM discriminant $P(S|X)$ in the SR after the fit to data, for MEM discriminant values larger than $2.0\times10^{-4}$, after subtraction of all backgrounds. The fitted distribution for the simulation of the signal is shown together with the post-fit uncertainty in the backgrounds. The binning is the same as the optimised binning used in the fit, resulting in a non-linear horizontal scale.

Pre-fit and post-fit event yields in the SR, for MEM discriminant values larger than $2.0\times10^{-4}$. The central value of the event yield for each process is calculated by summing the values of the discriminant bin contents, using the nominal expected yield for the pre-fit value, and the best-fit estimate for the post-fit value. The error includes statistical and systematic uncertainties summed in quadrature. All sources of systematic uncertainties are included, taking into account correlations and anti-correlations in the post-fit case. The uncertainties in the $t\bar{t}$ and $W$+jets normalisation factors, as well as in the s-channel signal cross-section, are not defined pre-fit and therefore only included in the post-fit uncertainties.

Observed impact of the different sources of uncertainty on the measured s-channel signal cross-section, grouped by categories. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. The 'Systematic uncertainties' category combines all sources of systematic uncertainties. The statistical uncertainty is obtained by repeating the fit after having fixed all nuisance parameters, including the $t\bar{t}$ and $W$+jets normalisation factors. 'Total' gives the total uncertainty on the measurement.

Observed impact of the different sources of $t\bar{t}$ modelling uncertainty on the measured s-channel signal cross-section. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, and 'ME/PS matching' to the matching of the ME to the parton shower.

Observed impact of the different sources of s-channel modelling uncertainty on the measured s-channel signal cross-section. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, as described in Section 7 in the paper.

Observed impact of the different sources of t-channel modelling uncertainty on the measured s-channel signal cross-section. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, as described in Section 7 in the paper.

Observed impact of the different sources of $tW$ modelling uncertainty on the measured s-channel signal cross-section, grouped by categories. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root. 'PS & had.' refers to the parton shower and hadronisation model, and '$t\bar{t}$ overlap' to the algorithm removing the overlap between $tW$ and $t\bar{t}$ production at NLO, as described in Section 7 in the paper.

Observed impact of the different sources of PDF uncertainties on the measured s-channel signal cross-section, grouped by categories. The impact of each category is obtained by repeating the fit after having fixed the set of nuisance parameters corresponding to that category, subtracting the square of the resulting uncertainty from the square of the uncertainty found in the full fit, and calculating the square root.

Comparison between data and prediction after the fit to data in the signal region for the leading-jet $p_{T}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the leading-jet $\eta$. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the subleading-jet $p_{T}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the subleading-jet $\eta$. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the lepton $p_{T}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the lepton $\eta$. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the ${E}_{T}^{miss}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Comparison between data and prediction after the fit to data in the signal region for the $m_{T}^{W}$. The last bin includes the overflow. The uncertainty band includes all uncertainties and their correlations. The lower panel of the figure shows the ratio of the data to the prediction.

Nuisance parameters ranked according to their post-fit impacts on the best-fit value of the ratio $\mu$ of the measured cross-section to the predicted cross-section. In the figure, only the 20 nuisance parameters with the largest post-fit impacts are shown. The empty (solid) blue rectangles illustrate the pre-fit (post-fit) impact on $\mu$, corresponding to the upper axis. The pre-fit (post-fit) impact of each nuisance parameter, $\Delta\mu$, is calculated as the difference in the fitted value of $\mu$ between the nominal fit and the fit when fixing the corresponding nuisance parameter to $\hat{\theta}\pm\Delta\theta$ ($\hat{\theta}\pm\Delta\hat{\theta}$), where $\hat{\theta}$ is the best-fit value of the nuisance parameter and $\Delta\theta$ ($\Delta\hat{\theta}$) is its pre-fit (post-fit) uncertainty. Several systematic uncertainties are split into different nuisance parameters, which are indicated by NP. JES (JER) indicates jet energy scale (resolution), and $\gamma$ indicates a nuisance parameter associated to the MC statistics in one of the 18 bins numbered from 0 to 17. The black points show the best-fit values of the nuisance parameters, with the error bars representing the post-fit uncertainties. Each nuisance parameter is shown wrt. its nominal value, $\theta_0$, and in units of its pre-fit uncertainty, except the free-floating normalisation factors of the $t\bar{t}$ and $W$+jets backgrounds, and the parameters associated to the MC statistics in each bin, for which the post-fit values and uncertainties are shown.

Correlation matrix of the nuisance parameters and of the ratio $\mu$ of the measured cross-section to the predicted cross-section. The correlations are given after the fit to data. In the figure, only the parameters which have a correlation of at least 0.2 with any other parameter are shown.

Distribution of the MEM discriminant $P(S|X)$ in the SR for MEM discriminant values larger than $2.0\times10^{-4}$, for the collision data used for the measurement, and for 1000 pseudo-data replicas, generated using a bootstrapping technique, in order to assess the statistical correlations between this measurement and others, for the purpose of combinations. The replicas are obtained by reweighting each observed data event by a random integer generated according to Poisson statistics, using the <a href="https://zenodo.org/record/5361038">BootstrapGenerator</a> software package , which implements a technique described in <a href="https://cds.cern.ch/record/2759945/">ATL-PHYS-PUB-2021-011</a>. The ATLAS event number and run number of each event are used as seed to uniquely but reproducibly initialise the random number generator for each event. Each pseudo-data replica is assigned an index, ranging from 0 to 999, corresponding to the random number index used consistently for each observed data event.

Measured values of the signal cross-section and of the $t\bar{t}$ and $W$+jets normalisation factors, obtained by statistical-only fits to the collision data used for the measurement, and to 1000 pseudo-data replicas, generated using a bootstrapping technique, in order to assess the statistical correlations between this measurement and others, for the purpose of combinations. The central values and their statistical uncertainties are obtained by repeating the fit after having fixed all nuisance parameters, except the $t\bar{t}$ and $W$+jets normalisation factors, which are let free-floating (unlike for the statistical uncertainty on the cross-section quoted in the paper). The replicas are obtained by reweighting each observed data event by a random integer generated according to Poisson statistics, using the <a href="https://zenodo.org/record/5361038">BootstrapGenerator</a> software package , which implements a technique described in <a href="https://cds.cern.ch/record/2759945/">ATL-PHYS-PUB-2021-011</a>. The ATLAS event number and run number of each event are used as seed to uniquely but reproducibly initialise the random number generator for each event. Each pseudo-data replica is assigned an index, ranging from 0 to 999, corresponding to the random number index used consistently for each observed data event.

Correlation matrix for the individual sources of systematic uncertainty considered in the analysis, for the combined opposite sign (OS) and same sign (SS) binned-template profile likelihood fit to data. The OS or SS refers to the charge signs of the primary lepton and the soft muon. The gamma parameters are NPs used to describe the effect of the limited statistics of the samples.

The $m_{jj}$ distributions for the CRs and the BDT classifier response distribution for the SR after the fit in all regions. The dashed line shows the total background distribution before the fit. The vertical error bars on the data points correspond to the data's statistical uncertainty. Overflows are included in the last bin. The uncertainty band corresponds to the combination of the MC statistical uncertainty and systematic uncertainties obtained in the fit.

The $m_{jj}$ distributions for the CRs and the BDT classifier response distribution for the SR after the fit in all regions. The dashed line shows the total background distribution before the fit. The vertical error bars on the data points correspond to the data's statistical uncertainty. Overflows are included in the last bin. The uncertainty band corresponds to the combination of the MC statistical uncertainty and systematic uncertainties obtained in the fit.

The $m_{jj}$ distributions for the CRs and the BDT classifier response distribution for the SR after the fit in all regions. The dashed line shows the total background distribution before the fit. The vertical error bars on the data points correspond to the data's statistical uncertainty. Overflows are included in the last bin. The uncertainty band corresponds to the combination of the MC statistical uncertainty and systematic uncertainties obtained in the fit.

Observed and expected event yields for the signal and all of the background processes considered in this analysis after the fit to the data in all of the regions. The uncertainty on the expected yield is the combination of statistical and systematic uncertainties obtained in the fit. The individual uncertainties can be correlated and do not necessarily add in quadrature to equal the total background uncertainty.

Summary of the event yield for processes in all regions, after the fit over all regions. The dashed line shows the total background distribution before the fit. The vertical error bars on the data points correspond to the data's statistical uncertainty. The uncertainty band corresponds to the combination of the MC statistical uncertainty and systematic uncertainties obtained in the fit.

Impact of different components of systematic uncertainty on the measured cross section, without taking into account the correlations. The impact is calculated by fixing the value of the corresponding nuisance parameters to the values obtained in the fit used to measure the cross section, performing the fit, estimating the signal strength uncertainty and subtracting it from the nominal uncertainty in quadrature.

Fitted POI values for this analysis, the previous ATLAS analysis, and their combination. The first and second columns present the values obtained in the individual analyses. The third column presents the values obtained in the combination.

Observed and expected one-dimensional limits on dimension 8 aQGC parameters. Limits are obtained by setting all aQGCs parameters except one to zero. Unitarity is not preserved.

Observed and expected one-dimensional limits on dimension 8 aQGC parameters in the region, where unitarity is preserved. Cutoff scales in MC, $E_{c}$, are given for each parameter. Limits are obtained by setting all aQGCs parameters except one to zero.

The $E_{T}^{\gamma}$ distribution in the SR after the fit in the control regions. The red (green) line shows the expected number of events in the case of non-zero EFT coefficient $f_{T0}/\Lambda^4$ ($f_{M0}/\Lambda^4$) with the value shown in the legend. The vertical error bars on the data points correspond to the data statistical uncertainty. Overflows are included in the last bin. The uncertainty band corresponds to the combination of the MC statistical uncertainty and systematic uncertainties obtained in the fit.

Evolution of the expected (red line) and observed (blue line) limits versus $E_{c}$ values for $f_{T0}/\Lambda^4$. The unitarity bound is shown by the black line. The $E_{c}<4$ TeV regime was obtained with $E_{T}^{\gamma} > 600$ GeV. The $E_{c} \geq 4$ TeV regime was obtained with $E_{T}^{\gamma} > 900$ GeV.

Evolution of the expected (red line) and observed (blue line) limits versus $E_{c}$ values for $f_{T5}/\Lambda^4$. The unitarity bound is shown by the black line. The $E_{c}<4$ TeV regime was obtained with $E_{T}^{\gamma} > 600$ GeV. The $E_{c} \geq 4$ TeV regime was obtained with $E_{T}^{\gamma} > 900$ GeV.

Evolution of the expected (red line) and observed (blue line) limits versus $E_{c}$ values for $f_{T8}/\Lambda^4$. The unitarity bound is shown by the black line. The $E_{c}<4$ TeV regime was obtained with $E_{T}^{\gamma} > 600$ GeV. The $E_{c} \geq 4$ TeV regime was obtained with $E_{T}^{\gamma} > 900$ GeV.

Evolution of the expected (red line) and observed (blue line) limits versus $E_{c}$ values for $f_{T9}/\Lambda^4$. The unitarity bound is shown by the black line. The $E_{c}<4$ TeV regime was obtained with $E_{T}^{\gamma} > 600$ GeV. The $E_{c} \geq 4$ TeV regime was obtained with $E_{T}^{\gamma} > 900$ GeV.

Evolution of the expected (red line) and observed (blue line) limits versus $E_{c}$ values for $f_{M0}/\Lambda^4$. The unitarity bound is shown by the black line. The $E_{c}<4$ TeV regime was obtained with $E_{T}^{\gamma} > 400$ GeV. The $E_{c} \geq 4$ TeV regime was obtained with $E_{T}^{\gamma} > 900$ GeV.

Evolution of the expected (red line) and observed (blue line) limits versus $E_{c}$ values for $f_{M1}/\Lambda^4$. The unitarity bound is shown by the black line. The $E_{c}<4$ TeV regime was obtained with $E_{T}^{\gamma} > 400$ GeV. The $E_{c} \geq 4$ TeV regime was obtained with $E_{T}^{\gamma} > 900$ GeV.

Evolution of the expected (red line) and observed (blue line) limits versus $E_{c}$ values for $f_{M2}/\Lambda^4$. The unitarity bound is shown by the black line. The $E_{c}<4$ TeV regime was obtained with $E_{T}^{\gamma} > 400$ GeV. The $E_{c} \geq 4$ TeV regime was obtained with $E_{T}^{\gamma} > 900$ GeV.

Correlation matrix of the parameters for the fit in all regions. Only parameters with absolute value of the correlation coefficient larger than 10 are shown.

The unfolded differential charge asymmetry as a function of the transverse momentum of the top pair system. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NNLO in QCD and NLO in EW theory are listed. The scale uncertainty is obtained by varying renormalisation and factorisation scales independently by a factor of 2 or 0.5 around $\mu_0$ to calculate the maximum and minimum value of the asymmetry, respectively. The nominal value $\mu_0$ is chosen as $H_T/4$. The variations in which one scale is multiplied by 2 while the other scale is divided by 2 are excluded. Finally, the scale and MC integration uncertainties are added in quadrature.

The unfolded differential charge asymmetry as a function of the longitudinal boost of the top pair system. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NNLO in QCD and NLO in EW theory are listed. The scale uncertainty is obtained by varying renormalisation and factorisation scales independently by a factor of 2 or 0.5 around $\mu_0$ to calculate the maximum and minimum value of the asymmetry, respectively. The nominal value $\mu_0$ is chosen as $H_T/4$. The variations in which one scale is multiplied by 2 while the other scale is divided by 2 are excluded. Finally, the scale and MC integration uncertainties are added in quadrature.

The unfolded inclusive leptonic asymmetry. The unfolded $A_C^{\ell\bar{\ell}}$ is obtained in the reduced phase-space defined by the requirement $|\Delta |\eta_{\ell\bar{\ell}}||<2.5$. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NLO in QCD and NLO in EW theory are listed. The theory uncertainty is obtained by varying both scales by a factor of 0.5 or 2.0 to calculate the minimum and maximum value of the asymmetry, respectively.

The unfolded differential leptonic asymmetry as a function of the invariant mass of the di-lepton pair. The unfolded $A_C^{\ell\bar{\ell}}$ is obtained in the reduced phase-space defined by the requirement $|\Delta |\eta_{\ell\bar{\ell}}||<2.5$. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NLO in QCD and NLO in EW theory are listed. The theory uncertainty is obtained by varying both scales by a factor of 0.5 or 2.0 to calculate the minimum and maximum value of the asymmetry, respectively.

The unfolded differential leptonic asymmetry as a function of the transverse momentum of the di-lepton pair. The unfolded $A_C^{\ell\bar{\ell}}$ is obtained in the reduced phase-space defined by the requirement $|\Delta |\eta_{\ell\bar{\ell}}||<2.5$. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NLO in QCD and NLO in EW theory are listed. The theory uncertainty is obtained by varying both scales by a factor of 0.5 or 2.0 to calculate the minimum and maximum value of the asymmetry, respectively.

The unfolded differential leptonic asymmetry as a function of the longitudinal boost of the di-lepton pair. The unfolded $A_C^{\ell\bar{\ell}}$ is obtained in the reduced phase-space defined by the requirement $|\Delta |\eta_{\ell\bar{\ell}}||<2.5$. The measured values are given with statistical and systematic uncertainties. The SM theory predictions calculated at NLO in QCD and NLO in EW theory are listed. The theory uncertainty is obtained by varying both scales by a factor of 0.5 or 2.0 to calculate the minimum and maximum value of the asymmetry, respectively.

Individual 68% and 95% CL bounds on the relevant Wilson coefficients of the SM Effective Field Theory in units of $\text{TeV}^{-2}$. The bounds are derived from the $A_C^{t\bar{t}}$ inclusive measurement. The experimental uncertainties are accounted for, in the form of the complete covariance matrix that keeps track of correlations between bins for the differential measurement. The theory uncertainty from the NNLO QCD + NLO EW calculation is included by explicitly varying the renormalization and factorization scales, or the parton density functions, in the calculation and registering the variations in the intervals.

Individual 68% and 95% CL bounds on the relevant Wilson coefficients of the SM Effective Field Theory in units of $\text{TeV}^{-2}$. The bounds are derived from the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement. The experimental uncertainties are accounted for, in the form of the complete covariance matrix that keeps track of correlations between bins for the differential measurement. The theory uncertainty from the NNLO QCD + NLO EW calculation is included by explicitly varying the renormalization and factorization scales, or the parton density functions, in the calculation and registering the variations in the intervals.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ inclusive measurement. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$ measurement for $\beta_{z,t\bar{t}}$ $\in$ [0,0.3]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$ measurement for $\beta_{z,t\bar{t}}$ $\in$ [0.3,0.6]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$ measurement for $\beta_{z,t\bar{t}}$ $\in$ [0.6,0.8]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$ measurement for $\beta_{z,t\bar{t}}$ $\in$ [0.8,1]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement for $m_{t\bar{t}}$ < 500 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement for $m_{t\bar{t}}$ $\in$ [500,750] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement for $m_{t\bar{t}}$ $\in$ [750,1000] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement for $m_{t\bar{t}}$ $\in$ [1000,1500] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement for $m_{t\bar{t}}$ > 1500 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$ measurement for $p_{T,t\bar{t}}$ < 30 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$ measurement for $p_{T,t\bar{t}}$ $\in$ [30,120] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$ measurement for $p_{T,t\bar{t}}$ > 120 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ inclusive measurement. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $\beta_{z,\ell\bar{\ell}}$ measurement for $\beta_{z,\ell\bar{\ell}}$ $\in$[0,0.3]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $\beta_{z,\ell\bar{\ell}}$ measurement for $\beta_{z,\ell\bar{\ell}}$ $\in$[0.3,0.6]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $\beta_{z,\ell\bar{\ell}}$ measurement for $\beta_{z,\ell\bar{\ell}}$ $\in$[0.6,0.8]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $\beta_{z,\ell\bar{\ell}}$ measurement for $\beta_{z,\ell\bar{\ell}}$ $\in$[0.8,1]. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $m_{\ell\bar{\ell}}$ measurement for $m_{\ell\bar{\ell}}$ < 200 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $m_{\ell\bar{\ell}}$ measurement for $m_{\ell\bar{\ell}}$ $\in$ [200,300] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $m_{\ell\bar{\ell}}$ measurement for $m_{\ell\bar{\ell}}$ $\in$ [300,400] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $m_{\ell\bar{\ell}}$ measurement for $m_{\ell\bar{\ell}}$ > 400 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $p_{T,\ell\bar{\ell}}$ measurement for $p_{T,\ell\bar{\ell}}$ < 20 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $p_{T,\ell\bar{\ell}}$ measurement for $p_{T,\ell\bar{\ell}}$ $\in$ [20, 70] GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Ranking of the systematic uncertainties with marginalisation for the $A_C^{\ell\ell}$ vs $p_{T,\ell\bar{\ell}}$ measurement for $p_{T,\ell\bar{\ell}}$ > 70 GeV. The effect on unfolded $A_C$ for down and up variation of the systematic uncertainty is shown, respectively. The pulls and constraints of the ranked NPs are obtained from data.

Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{t\bar{t}}$ inclusive measurement. Only $|\rho_{ij}| > 0.05$ values are included.

Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement. Only $|\rho_{ij}| > 0.05$ values are included.

Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$ measurement. Only $|\rho_{ij}| > 0.05$ values are included.

Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$ measurement. Only $|\rho_{ij}| > 0.05$ values are included.

Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{\ell\ell}$ inclusive measurement. Only $|\rho_{ij}| > 0.05$ values are included.

Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{\ell\ell}$ vs $m_{\ell\bar{\ell}}$ measurement. Only $|\rho_{ij}| > 0.05$ values are included.

Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{\ell\ell}$ vs $p_{T,\ell\bar{\ell}}$ measurement. Only $|\rho_{ij}| > 0.05$ values are included.

Post-marginalisation correlation coefficients $\rho_{ij}$ of nuisance parameters for the $A_C^{\ell\ell}$ vs $\beta_{z,\ell\bar{\ell}}$ measurement. Only $|\rho_{ij}| > 0.05$ values are included.

Covariance matrix for the $A_C^{t\bar{t}}$ vs $m_{t\bar{t}}$ measurement.

Covariance matrix for the $A_C^{t\bar{t}}$ vs $p_{T,t\bar{t}}$ measurement.

Covariance matrix for the $A_C^{t\bar{t}}$ vs $\beta_{z,t\bar{t}}$ measurement.

Covariance matrix for the $A_C^{\ell\ell}$ vs $m_{\ell\bar{\ell}}$ measurement.

Covariance matrix for the $A_C^{\ell\ell}$ vs $p_{T,\ell\bar{\ell}}$ measurement.

Covariance matrix for the $A_C^{\ell\ell}$ vs $\beta_{z,\ell\bar{\ell}}$ measurement.

Leading tau Pt distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{h}\tau_{lep}\tau_{had}$-2j region. Other MC includes single top, V+jets, and other small backgrounds. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Leading tau Pt distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{h}\tau_{lep}\tau_{had}$-3j region. Other MC includes single top, V+jets, and other small backgrounds. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Leading tau Pt distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{\ell}\tau_{had}\tau_{had}$SS region. Other MC includes single top, V+jets, and other small backgrounds. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Leading tau Pt distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{h}\tau_{had}\tau_{had}$-2j region. Rare includes single top, V+jets, and other small backgrounds. $\tau_{sub}$ real includes the contribution of fakes for which the sub-leading tau is real. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Leading tau Pt distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{h}\tau_{had}\tau_{had}$-3j region. Rare includes single top, V+jets, and other small backgrounds. $\tau_{sub}$ real includes the contribution of fakes for which the sub-leading tau is real. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Leading tau Pt distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{h}\tau_{had}\tau_{had}$-3jSS region. Rare includes single top, V+jets, and other small backgrounds. $\tau_{sub}$ real includes the contribution of fakes for which the sub-leading tau is real. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Di-tau mass distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{\ell}\tau_{had}\tau_{had}$ region. Other MC includes single top, V+jets, and other small backgrounds. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Di-tau mass distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{\ell}\tau_{had}$-1j region. Other MC includes single top, V+jets, and other small backgrounds. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Di-tau mass distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{\ell}\tau_{had}$-2j region. Other MC includes single top, V+jets, and other small backgrounds. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Di-tau mass distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{h}\tau_{lep}\tau_{had}$-2j region. Other MC includes single top, V+jets, and other small backgrounds. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Di-tau mass distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{h}\tau_{lep}\tau_{had}$-3j region. Other MC includes single top, V+jets, and other small backgrounds. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Di-tau mass distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{\ell}\tau_{had}\tau_{had}$SS region. Other MC includes single top, V+jets, and other small backgrounds. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Di-tau mass distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{h}\tau_{had}\tau_{had}$-2j region. Rare includes single top, V+jets, and other small backgrounds. $\tau_{sub}$ real includes the contribution of fakes for which the sub-leading tau is real. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Di-tau mass distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{h}\tau_{had}\tau_{had}$-3j region. Rare includes single top, V+jets, and other small backgrounds. $\tau_{sub}$ real includes the contribution of fakes for which the sub-leading tau is real. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

Di-tau mass distributions obtained before the fit to data (Pre-Fit) showing the expected background and tuH signals after applying fake factors in the $t_{h}\tau_{had}\tau_{had}$-3jSS region. Rare includes single top, V+jets, and other small backgrounds. $\tau_{sub}$ real includes the contribution of fakes for which the sub-leading tau is real. The tuH signals with nominal branching ratio of 0.1% are scaled using normalization factors of 2 to 50. Statistical and systematic uncertainties are included in the "Total background".

BDT output distributions obtained from a signal+background fit to the data for the tuH search in the $t_{\ell}\tau_{had}\tau_{had}$ region, Other MC includes single top, V+jets, and other small backgrounds. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(uH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tuH search in the $t_{\ell}\tau_{had}$-1j region, Other MC includes single top, V+jets, and other small backgrounds. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(uH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tuH search in the $t_{\ell}\tau_{had}$-2j region, Other MC includes single top, V+jets, and other small backgrounds. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(uH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tuH search in the $t_{h}\tau_{lep}\tau_{had}$-2j region, Other MC includes single top, V+jets, and other small backgrounds. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(uH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tuH search in the $t_{h}\tau_{lep}\tau_{had}$-3j region, Other MC includes single top, V+jets, and other small backgrounds. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(uH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tuH search in the $t_{\ell}\tau_{had}\tau_{had}$SS region, Other MC includes single top, V+jets, and other small backgrounds. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(uH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tuH search in the $t_{h}\tau_{had}\tau_{had}$-2j region, Rare includes single top, V+jets, and other small backgrounds. $\tau_{sub}$ real includes the contribution of fakes for which the sub-leading tau is real. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(uH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tuH search in the $t_{h}\tau_{had}\tau_{had}$-3j region, Rare includes single top, V+jets, and other small backgrounds. $\tau_{sub}$ real includes the contribution of fakes for which the sub-leading tau is real. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(uH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tuH search in the $t_{h}\tau_{had}\tau_{had}$-3jSS region, Rare includes single top, V+jets, and other small backgrounds. $\tau_{sub}$ real includes the contribution of fakes for which the sub-leading tau is real. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(uH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tcH search in the $t_{\ell}\tau_{had}\tau_{had}$ region, Other MC includes single top, V+jets, and other small backgrounds. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(cH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tcH search in the $t_{\ell}\tau_{had}$-1j region, Other MC includes single top, V+jets, and other small backgrounds. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(cH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tcH search in the $t_{\ell}\tau_{had}$-2j region, Other MC includes single top, V+jets, and other small backgrounds. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(cH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tcH search in the $t_{h}\tau_{lep}\tau_{had}$-2j region, Other MC includes single top, V+jets, and other small backgrounds. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(cH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tcH search in the $t_{h}\tau_{lep}\tau_{had}$-3j region,Other MC includes single top, V+jets, and other small backgrounds. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(cH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tcH search in the $t_{\ell}\tau_{had}\tau_{had}$SS region, Other MC includes single top, V+jets, and other small backgrounds. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(cH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tcH search in the $t_{h}\tau_{had}\tau_{had}$-2j region, Rare includes single top, V+jets, and other small backgrounds. $\tau_{sub}$ real includes the contribution of fakes for which the sub-leading tau is real. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(cH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tcH search in the $t_{h}\tau_{had}\tau_{had}$-3j region, Rare includes single top, V+jets, and other small backgrounds. $\tau_{sub}$ real includes the contribution of fakes for which the sub-leading tau is real. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(cH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$ of 0.1%.

BDT output distributions obtained from a signal+background fit to the data for the tcH search in the $t_{h}\tau_{had}\tau_{had}$-3jSS region, Rare includes single top, V+jets, and other small backgrounds. $\tau_{sub}$ real includes the contribution of fakes for which the sub-leading tau is real. Statistical and systematic uncertainties are included in the "Total background". The signal shapes of tt(cH), tH, and their sum are also shown using a normalisation of 2 x $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$ of 0.1%.

95% CL upper limits on $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$ for the individual searches as well as their combination, assuming $\mathcal{B}(\mathrm{t}\to\mathrm{uH}) = 0$. The observed limits are compared with the expected (median) limits under the background-only hypothesis. The surrounding shaded bands correspond to the 68% and 95% CL intervals around the expected limits, denoted by $\pm 1\sigma$ and $\pm 2\sigma$, respectively.

95% CL upper limits on $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ for the individual searches as well as their combination, assuming $\mathcal{B}(\mathrm{t}\to\mathrm{cH}) = 0$. The observed limits are compared with the expected (median) limits under the background-only hypothesis. The surrounding shaded bands correspond to the 68% and 95% CL intervals around the expected limits, denoted by $\pm 1\sigma$ and $\pm 2\sigma$, respectively.

Observed upper limits at 95% CL on the branching fractions in the plane of $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ and $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$.

Expected upper limits at 95% CL on the branching fractions in the plane of $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ and $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$.

Expected $+2\sigma$ upper limits at 95% CL on the branching fractions in the plane of $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ and $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$.

Expected $+1\sigma$ upper limits at 95% CL on the branching fractions in the plane of $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ and $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$.

Expected $-1\sigma$ upper limits at 95% CL on the branching fractions in the plane of $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ and $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$.

Expected $-2\sigma$ upper limits at 95% CL on the branching fractions in the plane of $\mathcal{B}(\mathrm{t}\to\mathrm{uH})$ and $\mathcal{B}(\mathrm{t}\to\mathrm{cH})$.

Observed upper limits at 95% CL on the anomalous couplings in the plane of $C_{\mathrm{c\phi}}$ and $C_{\mathrm{u\phi}}$.

Expected upper limits at 95% CL on the anomalous couplings in the plane of $C_{\mathrm{c\phi}}$ and $C_{\mathrm{u\phi}}$.

Expected $+2\sigma$ upper limits at 95% CL on the anomalous couplings in the plane of $C_{\mathrm{c\phi}}$ and $C_{\mathrm{u\phi}}$.

Expected $+1\sigma$ upper limits at 95% CL on the anomalous couplings in the plane of $C_{\mathrm{c\phi}}$ and $C_{\mathrm{u\phi}}$.

Expected $-1\sigma$ upper limits at 95% CL on the anomalous couplings in the plane of $C_{\mathrm{c\phi}}$ and $C_{\mathrm{u\phi}}$.

Expected $-2\sigma$ upper limits at 95% CL on the anomalous couplings in the plane of $C_{\mathrm{c\phi}}$ and $C_{\mathrm{u\phi}}$.

Predicted and observed yields in each of the analysis regions considered in leptonic channel.

Predicted and observed yields in each of the analysis regions considered in hadronic channel.

Absolute uncertainties on $\mathcal{B}(\mathrm{t}\to\mathrm{qH})$ obtained from the combined fit to the data.

Summary of 95% CL upper limits on $\mathcal{B}(\mathrm{t}\to\mathrm{qH})$, significance and best-fit branching ratio in the signal regions. The values in the tables are in the form of observed(expected).

Data selection efficiency as a function of nuclear recoil energy

Data points used in analysis in log_10(S2)-S1 space