Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.

Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.

Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.

Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.

Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.

Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.

Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.

Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.

Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.

Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.

Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.

Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.

N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.

N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.

N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.

N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.

The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.

The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.

The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.

The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.

The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.

The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.

The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.

The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.

The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.

The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.

The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.

The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.

The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.

Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production

Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.

Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.

Experimental Xi values and FJF predictions for the four NRQCD terms using BK LDME parameters

Experimental Xi values and FJF predictions for the four NRQCD terms using BCKL LDME parameters

Experimental Xi values and FJF predictions for the four NRQCD terms using BK LDME parameters

Invariant $p_{T}$-differential spectra of $\Omega- + \bar{\Omega+}$ in p+p and p+Pb at $\sqrt{s}$=5.02 TeV in |$y_{CM}$| < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in |$y_{CM}$| < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in |$y_{CM}$| < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in |$y_{CM}$| < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in |$y_{CM}$| < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in -1.8 < $y_{CM}$ < 0

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in -1.8 < $y_{CM}$ < 0

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in -1.8 < $y_{CM}$ < 0

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0 < $y_{CM}$ < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0 < $y_{CM}$ < 1.8

$R_{pPb}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0 < $y_{CM}$ < 1.8

Invariant $p_{T}$-differential spectra of ${K_{0}}^{S}$ in p+Pb at $\sqrt{s}$=5.02 TeV in various $y_{CM}$ ranges

Invariant $p_{T}$-differential spectra of $\Lambda + \bar{\Lambda}$ in p+Pb at $\sqrt{s}$=5.02 TeV in various $y_{CM}$ ranges

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0.3 < |$y_{CM}$| < 0.8

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0.3 < |$y_{CM}$| < 0.8

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0.3 < |$y_{CM}$| < 0.8

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0.8 < |$y_{CM}$| < 1.3

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0.8 < |$y_{CM}$| < 1.3

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 0.8 < |$y_{CM}$| < 1.3

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 1.3 < |$y_{CM}$| < 1.8

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 1.3 < |$y_{CM}$| < 1.8

$Y_{asym}$ in p+Pb at $\sqrt{s}$=5.02 TeV in 1.3 < |$y_{CM}$| < 1.8

Dijet invariant mass distribution for the category with at least one b-tagged jet.

Dijet invariant mass distribution for the category with both jets b-tagged.

The 95% CL upper limits on the cross-section times acceptance times branching ratio into two jets as a function of the mass of q* signal.

The 95% CL upper limits on the cross-section times acceptance times branching ratio into two jets as a function of the mass of QBH signal.

The 95% CL upper limits on the cross-section times acceptance times branching ratio into two jets as a function of the mass of W' signal.

The 95% CL upper limits on the cross-section times acceptance times branching ratio into two jets as a function of the mass of W* signal.

The upper limits on the DM mediator Z' signal at 95% CL from the inclusive category. The 95% CL upper limits are set on the universal quark coupling $g_q$ as a function of the Z' mass.

The 95% CL upper limit on the cross-section times acceptance times b-tagging efficiency times branching ratio as a function of the mass of the b* signal.

The 95% CL upper limit on the cross-section times acceptance times b-tagging efficiency times branching ratio as a function of the signal mass in the DM mediator Z' with $g_q$ = 0.25 model.

The 95% CL upper limit on the cross-section times acceptance times b-tagging efficiency times branching ratio as a function of the signal mass in the SSM Z' model.

The 95% CL upper limit on the cross-section times acceptance times b-tagging efficiency times branching ratio as a function of the signal mass in the graviton with $k/\overline{M}_{PL}=0.2$ model.

The 95% CL upper limit on the cross-section times kinematic acceptance times branching ratio for resonances with a generic Gaussian shape, as a function of the Gaussian mean mass in the inclusive category. Different widths, from 0% up to 15% of the signal mass, are considered. Gaussian-shape signals with 0% widths correspond to signal widths smaller than the experimental resolution. For a Gaussian-shaped signal with a relative width of 15%, the limits are truncated at high mass when the broad signal starts to overlap the upper end of the mass spectrum.

The 95% CL upper limit on the cross-section times kinematic acceptance times b-tagging efficiency times branching ratio for resonances with a generic Gaussian shape, as a function of the Gaussian mean mass in the 1 b category. Different widths, from 0% up to 15% of the signal mass, are considered. Gaussian-shape signals with 0% widths correspond to signal widths smaller than the experimental resolution. For a Gaussian-shaped signal with a relative width of 15%, the limits are truncated at high mass when the broad signal starts to overlap the upper end of the mass spectrum.

The 95% CL upper limit on the cross-section times kinematic acceptance times b-tagging efficiency times branching ratio for resonances with a generic Gaussian shape, as a function of the Gaussian mean mass in the 2 b category. Different widths, from 0% up to 15% of the signal mass, are considered. Gaussian-shape signals with 0% widths correspond to signal widths smaller than the experimental resolution. For a Gaussian-shaped signal with a relative width of 15%, the limits are truncated at high mass when the broad signal starts to overlap the upper end of the mass spectrum.

The expected 95% CL upper limits on the cross-section times acceptance times b-tagging efficiency times branching ratio as a function of the DM mediator Z' mass for the current and previous iterations of the analysis. The upper limit of the previous result was obtained with the Bayesian method and is also shown scaled to the 139 fb$^{-1}$ integrated luminosity of the current result to illustrate the effect of the analysis improvements.

Acceptance for the QBH, Q* and W' benchmark signal models in the inclusive category, as a function of the simulated mass.

Acceptance for the DM Z' benchmark signal model for various $g_q$ coupling parameters in the inclusive category, as a function of the simulated mass.

Acceptance for the W* benchmark signal model in the inclusive category, as a function of the simulated mass.

Acceptance times b-tagging efficiency for the b* benchmark signal model in the 1b category, as a function of the simulated mass.

Acceptance times b-tagging efficiency for the DM Z' with $g_q$=0.25, SSM Z' and graviton with $k/\overline{M}_{PL}=0.2$ benchmark signal models in the 2b category, as a function of the simulated mass.

The expected 95% CL upper limits on the cross-section times branching ratio as a function of the DM mediator Z' mass for the current and previous iterations of the analysis. The upper limit of the previous result was obtained with the Bayesian method and is also shown scaled to the 139 fb$^{-1}$ integrated luminosity of the current result to illustrate the effect of the analysis improvements. The current b-tagging requirement is tighter than the previous one for high-$p_T$ jets, resulting in a data sample with limited size for mass above 4 TeV. The background rejection, instead, has improved significantly across the entire mass spectrum inspected by the analysis.

Mixed higher-order flow harmonic $v_6\{\Psi_{33}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

Mixed higher-order flow harmonic $v_7\{\Psi_{223}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

Mixed higher-order flow harmonic $v_4\{\Psi_{22}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_5\{\Psi_{23}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_6\{\Psi_{222}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_6\{\Psi_{33}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_7\{\Psi_{223}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_4\{\Psi_{22}\}$ from the scalar-product method at 2.76 TeV as a function of PT in the 0-20% centrality range.

Mixed higher-order flow harmonic $v_5\{\Psi_{23}\}$ from the scalar-product method at 2.76 TeV as a function of PT in the 0-20% centrality range.

Mixed higher-order flow harmonic $v_6\{\Psi_{222}\}$ from the scalar-product method at 2.76 TeV as a function of PT in the 0-20% centrality range.

Mixed higher-order flow harmonic $v_6\{\Psi_{33}\}$ from the scalar-product method at 2.76 TeV as a function of PT in the 0-20% centrality range.

Mixed higher-order flow harmonic $v_7\{\Psi_{223}\}$ from the scalar-product method at 2.76 TeV as a function of PT in the 0-20% centrality range.

Mixed higher-order flow harmonic $v_4\{\Psi_{22}\}$ from the scalar-product method at 2.76 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_5\{\Psi_{23}\}$ from the scalar-product method at 2.76 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_6\{\Psi_{222}\}$ from the scalar-product method at 2.76 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_6\{\Psi_{33}\}$ from the scalar-product method at 2.76 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_7\{\Psi_{223}\}$ from the scalar-product method at 2.76 TeV as a function of PT in the 20-60% centrality range.

The overall flow harmonic $v_4\{\Psi_{4}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

The overall flow harmonic $v_5\{\Psi_{5}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

The overall flow harmonic $v_6\{\Psi_{6}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

The overall flow harmonic $v_6\{\Psi_{6}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

The overall flow harmonic $v_7\{\Psi_{7}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

The overall flow harmonic $v_4\{\Psi_{4}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

The overall flow harmonic $v_5\{\Psi_{5}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

The overall flow harmonic $v_6\{\Psi_{6}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

The overall flow harmonic $v_6\{\Psi_{6}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

The overall flow harmonic $v_7\{\Psi_{7}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_4\{\Psi_{22}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

Mixed higher-order flow harmonic $v_5\{\Psi_{23}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

Mixed higher-order flow harmonic $v_6\{\Psi_{222}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

Mixed higher-order flow harmonic $v_6\{\Psi_{33}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

Mixed higher-order flow harmonic $v_7\{\Psi_{223}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

Mixed higher-order flow harmonic $v_4\{\Psi_{22}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_5\{\Psi_{23}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_6\{\Psi_{222}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_6\{\Psi_{33}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_7\{\Psi_{223}\}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Nonlinear response coefficient $\chi_{422}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

Nonlinear response coefficient $\chi_{523}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

Nonlinear response coefficient $\chi_{6222}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

Nonlinear response coefficient $\chi_{633}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

Nonlinear response coefficient $\chi_{7223}$ from the scalar-product method at 5.02 TeV as a function of PT in the 0-20% centrality range.

Nonlinear response coefficient $\chi_{422}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Nonlinear response coefficient $\chi_{523}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Nonlinear response coefficient $\chi_{6222}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Nonlinear response coefficient $\chi_{633}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Nonlinear response coefficient $\chi_{7223}$ from the scalar-product method at 5.02 TeV as a function of PT in the 20-60% centrality range.

Nonlinear response coefficient $\chi_{422}$ from the scalar-product method at 2.76 TeV as a function of PT in the 0-20% centrality range.

Nonlinear response coefficient $\chi_{523}$ from the scalar-product method at 2.76 TeV as a function of PT in the 0-20% centrality range.

Nonlinear response coefficient $\chi_{6222}$ from the scalar-product method at 2.76 TeV as a function of PT in the 0-20% centrality range.

Nonlinear response coefficient $\chi_{633}$ from the scalar-product method at 2.76 TeV as a function of PT in the 0-20% centrality range.

Nonlinear response coefficient $\chi_{7223}$ from the scalar-product method at 2.76 TeV as a function of PT in the 0-20% centrality range.

Nonlinear response coefficient $\chi_{422}$ from the scalar-product method at 2.76 TeV as a function of PT in the 20-60% centrality range.

Nonlinear response coefficient $\chi_{523}$ from the scalar-product method at 2.76 TeV as a function of PT in the 20-60% centrality range.

Nonlinear response coefficient $\chi_{6222}$ from the scalar-product method at 2.76 TeV as a function of PT in the 20-60% centrality range.

Nonlinear response coefficient $\chi_{633}$ from the scalar-product method at 2.76 TeV as a function of PT in the 20-60% centrality range.

Nonlinear response coefficient $\chi_{7223}$ from the scalar-product method at 2.76 TeV as a function of PT in the 20-60% centrality range.

Mixed higher-order flow harmonic $v_4\{\Psi_{22}\}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Mixed higher-order flow harmonic $v_5\{\Psi_{23}\}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Mixed higher-order flow harmonic $v_6\{\Psi_{222}\}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Mixed higher-order flow harmonic $v_6\{\Psi_{33}\}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Mixed higher-order flow harmonic $v_7\{\Psi_{223}\}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Mixed higher-order flow harmonic $v_4\{\Psi_{22}\}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Mixed higher-order flow harmonic $v_5\{\Psi_{23}\}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Mixed higher-order flow harmonic $v_6\{\Psi_{222}\}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Mixed higher-order flow harmonic $v_6\{\Psi_{33}\}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Mixed higher-order flow harmonic $v_7\{\Psi_{223}\}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{422}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{523}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{6222}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{633}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{7223}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{422}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{523}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{6222}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{633}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{7223}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{422}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{523}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{6222}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{633}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{7223}$ from the scalar-product method at 5.02 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{422}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{523}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{6222}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{633}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Nonlinear response coefficient $\chi_{7223}$ from the scalar-product method at 2.76 TeV as a function of centrality.

Normalised differential cross-section in the fiducial region as a function of lepton |eta|. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The corresponding correlation matrices are given in Tables 29 and 30.

Absolute differential cross-section in the fiducial region as a function of dilepton pT. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The last bin includes overflow beyond the upper bin boundary. The corresponding correlation matrices are given in Tables 31 and 32.

Normalised differential cross-section in the fiducial region as a function of dilepton pT. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The last bin includes overflow beyond the upper bin boundary. The corresponding correlation matrices are given in Tables 33 and 34.

Absolute differential cross-section in the fiducial region as a function of dilepton invariant mass. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The last bin includes overflow beyond the upper bin boundary. The corresponding correlation matrices are given in Tables 35 and 36.

Normalised differential cross-section in the fiducial region as a function of dilepton invariant mass. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The last bin includes overflow beyond the upper bin boundary. The corresponding correlation matrices are given in Tables 37 and 38.

Absolute differential cross-section in the fiducial region as a function of dilepton |rapidity|. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The corresponding correlation matrices are given in Tables 39 and 40.

Normalised differential cross-section in the fiducial region as a function of dilepton |rapidity|. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The corresponding correlation matrices are given in Tables 41 and 42.

Absolute differential cross-section in the fiducial region as a function of the azimuthal angle between the leptons. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The corresponding correlation matrices are given in Tables 43 and 44.

Normalised differential cross-section in the fiducial region as a function of the azimuthal angle between the leptons. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The corresponding correlation matrices are given in Tables 45 and 46.

Absolute differential cross-section in the fiducial region as a function of the sum of pT of the two leptons. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The last bin includes overflow beyond the upper bin boundary. The corresponding correlation matrices are given in Tables 47 and 48.

Normalised differential cross-section in the fiducial region as a function of the sum of pT of the two leptons. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The last bin includes overflow beyond the upper bin boundary. The corresponding correlation matrices are given in Tables 49 and 50.

Absolute differential cross-section in the fiducial region as a function of the sum of the energies of the two leptons. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The last bin includes overflow beyond the upper bin boundary. The corresponding correlation matrices are given in Tables 51 and 52.

Normalised differential cross-section in the fiducial region as a function of the sum of the energies of the two leptons. The first column gives the cross-section including contributions from leptonic tau decays, the second without. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb). The last bin includes overflow beyond the upper bin boundary. The corresponding correlation matrices are given in Tables 53 and 54.

Absolute differential cross-section in the fiducial region as a function of lepton |eta| and dilepton invariant mass. The first four columns give the cross-section including contributions from leptonic tau decays in the four mass bins, and the last four columns do not include the leptonic tau contributions. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb).

Normalised differential cross-section in the fiducial region as a function of lepton |eta| and dilepton invariant mass. The first four columns give the cross-section including contributions from leptonic tau decays in the four mass bins, and the last four columns do not include the leptonic tau contributions. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb).

Absolute differential cross-section in the fiducial region as a function of dilepton |rapidity| and dilepton invariant mass. The first four columns give the cross-section including contributions from leptonic tau decays in the four mass bins, and the last four columns do not include the leptonic tau contributions. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb).

Normalised differential cross-section in the fiducial region as a function of dilepton |rapidity| and dilepton invariant mass. The first four columns give the cross-section including contributions from leptonic tau decays in the four mass bins, and the last four columns do not include the leptonic tau contributions. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb).

Absolute differential cross-section in the fiducial region as a function of the azimuthal angle between the leptons and dilepton invariant mass. The first four columns give the cross-section including contributions from leptonic tau decays in the four mass bins, and the last four columns do not include the leptonic tau contributions. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb).

Normalised differential cross-section in the fiducial region as a function of the azimuthal angle between the leptons and dilepton invariant mass. The first four columns give the cross-section including contributions from leptonic tau decays in the four mass bins, and the last four columns do not include the leptonic tau contributions. Systematic uncertainties are given for ttbar modelling (ttmod), lepton calibration (lept), jet and b-tagging calibration (jet), backgrounds (bkg) and integrated luminosity and beam energy (leb).

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of lepton pT as measured in Table 1, including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of lepton pT as measured in Table 1, not including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of lepton pT as measured in Table 2, including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of lepton pT as measured in Table 2, not including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of lepton |eta| as measured in Table 3, including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of lepton |eta| as measured in Table 3, not including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of lepton |eta| as measured in Table 4, including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of lepton |eta| as measured in Table 4, not including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of dilepton pT as measured in Table 5, including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of dilepton pT as measured in Table 5, not including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of dilepton pT as measured in Table 6, including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of dilepton pT as measured in Table 6, not including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of dilepton invariant mass as measured in Table 7, including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of dilepton invariant mass as measured in Table 7, not including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of dilepton invariant mass as measured in Table 8, including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of dilepton invariant mass as measured in Table 8, not including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of dilepton |rapidity| as measured in Table 9, including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of dilepton |rapidity| as measured in Table 9, not including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of dilepton |rapidity| as measured in Table 10, including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of dilepton |rapidity| as measured in Table 10, not including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of the azimuthal angle between the leptons as measured in Table 11, including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of the azimuthal angle between the leptons as measured in Table 11, not including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of the azimuthal angle between the leptons as measured in Table 12, including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of the azimuthal angle between the leptons as measured in Table 12, not including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of the sum of pT of the two leptons as measured in Table 13, including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of the sum of pT of the two leptons as measured in Table 13, not including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of the sum of pT of the two leptons as measured in Table 14, including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of the sum of pT of the two leptons as measured in Table 14, not including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of the sum of the energies of the two leptons as measured in Table 15, including tau decay contributions.

Correlation matrix for the absolute differential cross-section in the fiducial region as a function of the sum of the energies of the two leptons as measured in Table 15, not including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of the sum of the energies of the two leptons as measured in Table 16, including tau decay contributions.

Correlation matrix for the normalised differential cross-section in the fiducial region as a function of the sum of the energies of the two leptons as measured in Table 16, not including tau decay contributions.

Correlation matrix for the combination of all eight one-dimensional absolute fiducial cross-section measurements, including tau decay contributions. The observables are arranged as follows: lepton pT (bins 1-11),lepton |eta| (bins 12-20),dilepton pT (bins 21-29),dilepton invariant mass (bins 30-41),dilepton |rapidity| (bins 42-50),the azimuthal angle between the leptons (bins 51-60),the sum of pT of the two leptons (bins 61-68),the sum of the energies of the two leptons (bins 69-78).

Correlation matrix for the combination of all eight one-dimensional absolute fiducial cross-section measurements, not including tau decay contributions. The observables are arranged as follows: lepton pT (bins 1-11),lepton |eta| (bins 12-20),dilepton pT (bins 21-29),dilepton invariant mass (bins 30-41),dilepton |rapidity| (bins 42-50),the azimuthal angle between the leptons (bins 51-60),the sum of pT of the two leptons (bins 61-68),the sum of the energies of the two leptons (bins 69-78).

Correlation matrix for the combination of all eight one-dimensional normalised fiducial cross-section measurements, including tau decay contributions. The observables are arranged as follows: lepton pT (bins 1-10),lepton |eta| (bins 11-18),dilepton pT (bins 19-26),dilepton invariant mass (bins 27-37),dilepton |rapidity| (bins 38-45),the azimuthal angle between the leptons (bins 46-54),the sum of pT of the two leptons (bins 55-61),the sum of the energies of the two leptons (bins 62-70).

Correlation matrix for the combination of all eight one-dimensional normalised fiducial cross-section measurements, not including tau decay contributions. The observables are arranged as follows: lepton pT (bins 1-10),lepton |eta| (bins 11-18),dilepton pT (bins 19-26),dilepton invariant mass (bins 27-37),dilepton |rapidity| (bins 38-45),the azimuthal angle between the leptons (bins 46-54),the sum of pT of the two leptons (bins 55-61),the sum of the energies of the two leptons (bins 62-70).

Fiducial region definition

The intercept parameter as a function of kT using the HCS method in pp collisions at 13 TeV.

1/Rinv^2 as a function of mT using the HCS method in pp collisions at 13 TeV.

The depth of the anticorrelation as function of multiplicity for kT integrated values.

Correlation function from the double ratio technique, integrated in the range 0 < kT < 1 GeV, for 0=<Ntrkoffline<=4. The error bars represent statistical uncertainties.

Correlation function from the double ratio technique, integrated in the range 0 < kT < 1 GeV, for 10=<Ntrkoffline<=12. The error bars represent statistical uncertainties.

Correlation function from the double ratio technique, integrated in the range 0 < kT < 1 GeV, for 31=<Ntrkoffline<=33. The error bars represent statistical uncertainties.

Correlation function from the double ratio technique, integrated in the range 0 < kT < 1 GeV, for 80=<Ntrkoffline<=84. The error bars represent statistical uncertainties.

Correlation function from the double ratio technique, integrated in the range 0 < kT < 1 GeV, for 105=<Ntrkoffline<=109. The error bars represent statistical uncertainties.

Correlation function from the double ratio technique, integrated in the range 0 < kT < 1 GeV, for 130=<Ntrkoffline<=250. The error bars represent statistical uncertainties.