Measured unfolded differential cross-section as a function of the dilepton transverse momentum $p^{ll}_{\mathrm{T}}$. NLO predictions from Sherpa 2.2.10 and MadGraph5_aMC@NLO 2.7.3 are also shown. The uncertainty in the predictions is divided into statistical and theoretical uncertainties (scale and PDF+$\alpha_{s}$).

Measured unfolded differential cross-section as a function of the the four-body transverse momentum $p^{ll\gamma\gamma}_{\mathrm{T}}$. NLO predictions from Sherpa 2.2.10 and MadGraph5_aMC@NLO 2.7.3 are also shown. The uncertainty in the predictions is divided into statistical and theoretical uncertainties (scale and PDF+$\alpha_{s}$).

Measured unfolded differential cross-section as a function of the diphoton invariant mass $m_{\gamma\gamma}$. NLO predictions from Sherpa 2.2.10 and MadGraph5_aMC@NLO 2.7.3 are also shown. The uncertainty in the predictions is divided into statistical and theoretical uncertainties (scale and PDF+$\alpha_{s}$).

Measured unfolded differential cross-section as a function of the four-body invariant mass $m_{ll\gamma\gamma}$. NLO predictions from Sherpa 2.2.10 and MadGraph5_aMC@NLO 2.7.3 are also shown. The uncertainty in the predictions is divided into statistical and theoretical uncertainties (scale and PDF+$\alpha_{s}$).

Expected and observed $95\%$ confidence intervals for the coupling parameters $f_{T,j}/\Lambda^{4}$ of transverse dimension-8 operators. All parameter values outside of the stated range are excluded at the chosen confidence level. No unitarity constraints are applied.

Expected and observed unitarised $95\%$ confidence intervals for the coupling parameter $f_{T,8}/\Lambda^{4}$ in the clipping energy range between 1.1 and 5 TeV. The non-unitarised limits ($E_c = \infty$) are also shown. All parameter values outside of the stated range are excluded at the chosen confidence level.

Expected and observed unitarised $95\%$ confidence intervals for the coupling parameter $f_{T,0}/\Lambda^{4}$ in the clipping energy range between 1.1 and 5 TeV. The non-unitarised limits ($E_c = \infty$) are also shown. All parameter values outside of the stated range are excluded at the chosen confidence level.

Expected and observed unitarised $95\%$ confidence intervals for the coupling parameter $f_{T,1}/\Lambda^{4}$ in the clipping energy range between 1.1 and 5 TeV. The non-unitarised limits ($E_c = \infty$) are also shown. All parameter values outside of the stated range are excluded at the chosen confidence level.

Expected and observed unitarised $95\%$ confidence intervals for the coupling parameter $f_{T,2}/\Lambda^{4}$ in the clipping energy range between 1.1 and 5 TeV. The non-unitarised limits ($E_c = \infty$) are also shown. All parameter values outside of the stated range are excluded at the chosen confidence level.

Expected and observed unitarised $95\%$ confidence intervals for the coupling parameter $f_{T,5}/\Lambda^{4}$ in the clipping energy range between 1.1 and 5 TeV. The non-unitarised limits ($E_c = \infty$) are also shown. All parameter values outside of the stated range are excluded at the chosen confidence level.

Expected and observed unitarised $95\%$ confidence intervals for the coupling parameter $f_{T,6}/\Lambda^{4}$ in the clipping energy range between 1.1 and 5 TeV. The non-unitarised limits ($E_c = \infty$) are also shown. All parameter values outside of the stated range are excluded at the chosen confidence level.

Expected and observed unitarised $95\%$ confidence intervals for the coupling parameter $f_{T,7}/\Lambda^{4}$ in the clipping energy range between 1.1 and 5 TeV. The non-unitarised limits ($E_c = \infty$) are also shown. All parameter values outside of the stated range are excluded at the chosen confidence level.

Expected and observed unitarised $95\%$ confidence intervals for the coupling parameter $f_{T,9}/\Lambda^{4}$ in the clipping energy range between 1.1 and 5 TeV. The non-unitarised limits ($E_c = \infty$) are also shown. All parameter values outside of the stated range are excluded at the chosen confidence level.

Jet multiplicity measured for a leading-pT jet ($p_{T1}$) with 400 < $p_{T1}$ < 800 GeV and for an azimuthal separation between the two leading jets of $0 < \Delta\Phi_{1,2} < 150^{\circ}$. The full breakdown of the uncertainties is displayed, with PU corresponding to Pileup, PREF to Trigger Prefering, PTHAT to the hard-scale (renormalization and factorization scales), MISS and FAKE to the inefficienties and background, LUMI to integrated luminosity. With JES, JER and stat. unc. following the notation in the paper.

Jet multiplicity measured for a leading-pT jet ($p_{T1}$) with 400 < $p_{T1}$ < 800 GeV and for an azimuthal separation between the two leading jets of $150 < \Delta\Phi_{1,2} < 170^{\circ}$. The full breakdown of the uncertainties is displayed, with PU corresponding to Pileup, PREF to Trigger Prefering, PTHAT to the hard-scale (renormalization and factorization scales), MISS and FAKE to the inefficienties and background, LUMI to integrated luminosity. With JES, JER and stat. unc. following the notation in the paper.

Jet multiplicity measured for a leading-pT jet ($p_{T1}$) with 400 < $p_{T1}$ < 800 GeV and for an azimuthal separation between the two leading jets of $170 < \Delta\Phi_{1,2} < 180^{\circ}$. The full breakdown of the uncertainties is displayed, with PU corresponding to Pileup, PREF to Trigger Prefering, PTHAT to the hard-scale (renormalization and factorization scales), MISS and FAKE to the inefficienties and background, LUMI to integrated luminosity. With JES, JER and stat. unc. following the notation in the paper.

Jet multiplicity measured for a leading-pT jet ($p_{T1}$) with $p_{T1}$ > 800 and for an azimuthal separation between the two leading jets of $0 < \Delta\Phi_{1,2} < 150^{\circ}$. The full breakdown of the uncertainties is displayed, with PU corresponding to Pileup, PREF to Trigger Prefering, PTHAT to the hard-scale (renormalization and factorization scales), MISS and FAKE to the inefficienties and background, LUMI to integrated luminosity. With JES, JER and stat. unc. following the notation in the paper.

Jet multiplicity measured for a leading-pT jet ($p_{T1}$) with $p_{T1}$ > 800 and for an azimuthal separation between the two leading jets of $150 < \Delta\Phi_{1,2} < 170^{\circ}$. The full breakdown of the uncertainties is displayed, with PU corresponding to Pileup, PREF to Trigger Prefering, PTHAT to the hard-scale (renormalization and factorization scales), MISS and FAKE to the inefficienties and background, LUMI to integrated luminosity. With JES, JER and stat. unc. following the notation in the paper.

Jet multiplicity measured for a leading-pT jet ($p_{T1}$) with $p_{T1}$ > 800 and for an azimuthal separation between the two leading jets of $170 < \Delta\Phi_{1,2} < 180^{\circ}$. The full breakdown of the uncertainties is displayed, with PU corresponding to Pileup, PREF to Trigger Prefering, PTHAT to the hard-scale (renormalization and factorization scales), MISS and FAKE to the inefficienties and background, LUMI to integrated luminosity. With JES, JER and stat. unc. following the notation in the paper.

Measured transverse momentum of the leading $p_{T}$ jet ($p_{T1}$). The full breakdown of the uncertainties is displayed, with PU corresponding to Pileup, PREF to Trigger Prefering, PTHAT to the hard-scale (renormalization and factorization scales), MISS and FAKE to the inefficienties and background, LUMI to integrated luminosity. With JES, JER and stat. unc. following the notation in the paper.

Measured transverse momentum of the subleading $p_{T}$ jet ($p_{T2}$). The full breakdown of the uncertainties is displayed, with PU corresponding to Pileup, PREF to Trigger Prefering, PTHAT to the hard-scale (renormalization and factorization scales), MISS and FAKE to the inefficienties and background, LUMI to integrated luminosity. With JES, JER and stat. unc. following the notation in the paper.

Measured transverse momentum of the third leading $p_{T}$ jet ($p_{T3}$). The full breakdown of the uncertainties is displayed, with PU corresponding to Pileup, PREF to Trigger Prefering, PTHAT to the hard-scale (renormalization and factorization scales), MISS and FAKE to the inefficienties and background, LUMI to integrated luminosity. With JES, JER and stat. unc. following the notation in the paper.

Measured transverse momentum of the fourth leading $p_{T}$ jet ($p_{T4}$). The full breakdown of the uncertainties is displayed, with PU corresponding to Pileup, PREF to Trigger Prefering, PTHAT to the hard-scale (renormalization and factorization scales), MISS and FAKE to the inefficienties and background, LUMI to integrated luminosity. With JES, JER and stat. unc. following the notation in the paper.

Jet multiplicity distribution in TUnfold binning ($N_{jets},\Delta\phi_{1,2},p_{T1}$) as indicated in the XML file provided as additional resource. The uncertainties follow the notation of Table 1.

Correlation matrix at particle level for the measured jet multiplicity in TUnfold binning ($N_{jets},\Delta\phi_{1,2},p_{T1}$) as indicated in the XML file provided as additional resource.

Jet $p_{T}$ distributions in TUnfold binning ($p_{T1},p_{T2},p_{T3},p_{T4}$) as indicated in the XML file provided as additional resource. The uncertainties follow the notation of Table 1.

Correlation matrix at particle level for the measured jet $p_{T}$ distributions in TUnfold binning ($p_{T1},p_{T2},p_{T3},p_{T4}$) as indicated in the XML file provided as additional resource.

The measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window, in bins of the dilepton transverse momentum. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $106 \le M_{ll} < 170$ GeV mass window, in bins of the dilepton transverse momentum. The values are normalized by the bin width.

The measured differential cross section in the $106 \le M_{ll} < 170$ GeV mass window, in bins of the dilepton transverse momentum. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $170 \le M_{ll} < 350$ GeV mass window, in bins of the dilepton transverse momentum. The values are normalized by the bin width.

The measured differential cross section in the $170 \le M_{ll} < 350$ GeV mass window, in bins of the dilepton transverse momentum. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $350 \le M_{ll} < 1000$ GeV mass window, in bins of the dilepton transverse momentum. The values are normalized by the bin width.

The measured differential cross section in the $350 \le M_{ll} < 1000$ GeV mass window, in bins of the dilepton transverse momentum. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $50 \le M_{ll} < 76$ GeV mass window, in bins of the dilepton transverse momentum. At least one jet is required. The values are normalized by the bin width.

The measured differential cross section in the $50 \le M_{ll} < 76$ GeV mass window, in bins of the dilepton transverse momentum. At least one jet is required. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window, in bins of the dilepton transverse momentum. At least one jet is required. The values are normalized by the bin width.

The measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window, in bins of the dilepton transverse momentum. At least one jet is required. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $106 \le M_{ll} < 170$ GeV mass window, in bins of the dilepton transverse momentum. At least one jet is required. The values are normalized by the bin width.

The measured differential cross section in the $106 \le M_{ll} < 170$ GeV mass window, in bins of the dilepton transverse momentum. At least one jet is required. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $170 \le M_{ll} < 350$ GeV mass window, in bins of the dilepton transverse momentum. At least one jet is required. The values are normalized by the bin width.

The measured differential cross section in the $170 \le M_{ll} < 350$ GeV mass window, in bins of the dilepton transverse momentum. At least one jet is required. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $50 \le M_{ll} < 76$ GeV mass window, in bins of the $\varphi^*$ variable. The values are normalized by the bin width.

The measured differential cross section in the $50 \le M_{ll} < 76$ GeV mass window, in bins of the $\varphi^*$ variable. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window, in bins of the $\varphi^*$ variable. The values are normalized by the bin width.

The measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window, in bins of the $\varphi^*$ variable. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $106 \le M_{ll} < 170$ GeV mass window, in bins of the $\varphi^*$ variable. The values are normalized by the bin width.

The measured differential cross section in the $106 \le M_{ll} < 170$ GeV mass window, in bins of the $\varphi^*$ variable. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $170 \le M_{ll} < 350$ GeV mass window, in bins of the $\varphi^*$ variable. The values are normalized by the bin width.

The measured differential cross section in the $170 \le M_{ll} < 350$ GeV mass window, in bins of the $\varphi^*$ variable. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $350 \le M_{ll} < 1000$ GeV mass window, in bins of the $\varphi^*$ variable. The values are normalized by the bin width.

The measured differential cross section in the $350 \le M_{ll} < 1000$ GeV mass window, in bins of the $\varphi^*$ variable. The values are normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $50 \le M_{ll} < 76$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. The values are not normalized by the bin width.

The measured differential cross section in the $50 \le M_{ll} < 76$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. The values are not normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $106 \le M_{ll} < 170$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. The values are not normalized by the bin width.

The measured differential cross section in the $106 \le M_{ll} < 170$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. The values are not normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $170 \le M_{ll} < 350$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. The values are not normalized by the bin width.

The measured differential cross section in the $170 \le M_{ll} < 350$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. The values are not normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $350 \le M_{ll} < 1000$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. The values are not normalized by the bin width.

The measured differential cross section in the $350 \le M_{ll} < 1000$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. The values are not normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $50 \le M_{ll} < 76$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width.

The measured differential cross section in the $50 \le M_{ll} < 76$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $106 \le M_{ll} < 170$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width.

The measured differential cross section in the $106 \le M_{ll} < 170$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $170 \le M_{ll} < 350$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width.

The measured differential cross section in the $170 \le M_{ll} < 350$ GeV mass window, in bins of the dilepton transverse momentum, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $50 \le M_{ll} < 76$ GeV mass window, in bins of the $\varphi^*$ variable, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width.

The measured differential cross section in the $50 \le M_{ll} < 76$ GeV mass window, in bins of the $\varphi^*$ variable, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $106 \le M_{ll} < 170$ GeV mass window, in bins of the $\varphi^*$ variable, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width.

The measured differential cross section in the $106 \le M_{ll} < 170$ GeV mass window, in bins of the $\varphi^*$ variable, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $170 \le M_{ll} < 350$ GeV mass window, in bins of the $\varphi^*$ variable, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width.

The measured differential cross section in the $170 \le M_{ll} < 350$ GeV mass window, in bins of the $\varphi^*$ variable, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width. This entry contains the covariance matrix of the results.

The measured differential cross section in the $350 \le M_{ll} < 1000$ GeV mass window, in bins of the $\varphi^*$ variable, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width.

The measured differential cross section in the $350 \le M_{ll} < 1000$ GeV mass window, in bins of the $\varphi^*$ variable, divided by the measured differential cross section in the $76 \le M_{ll} < 106$ GeV mass window. At least one jet is required. The values are not normalized by the bin width. This entry contains the covariance matrix of the results.

Response matrix for pT ll mass 50-76 (electron channel)

Response matrix for pT ll mass 50-76 (muon channel)

Response matrix for pT ll mass 76-106 (electron channel)

Response matrix for pT ll mass 76-106 (muon channel)

Response matrix for pT ll mass 106-170 (electron channel)

Response matrix for pT ll mass 106-170 (muon channel)

Response matrix for pT ll mass 170-350 (electron channel)

Response matrix for pT ll mass 170-350 (muon channel)

Response matrix for pT ll mass 350-1000 (electron channel)

Response matrix for pT ll mass 50-76 jet (electron channel)

Response matrix for pT ll mass 50-76 jet (muon channel)

Response matrix for pT ll mass 76-106 jet (electron channel)

Response matrix for pT ll mass 76-106 jet (muon channel)

Response matrix for pT ll mass 106-170 jet (electron channel)

Response matrix for pT ll mass 106-170 jet (muon channel)

Response matrix for pT ll mass 170-350 jet (electron channel)

Response matrix for pT ll mass 170-350 jet (muon channel)

Response matrix for phistar mass 50-76 (electron channel)

Response matrix for phistar mass 50-76 (muon channel)

Response matrix for phistar mass 76-106 (electron channel)

Response matrix for phistar mass 76-106 (muon channel)

Response matrix for phistar mass 106-170 (electron channel)

Response matrix for phistar mass 106-170 (muon channel)

Response matrix for phistar mass 170-350 (electron channel)

Response matrix for phistar mass 170-350 (muon channel)

Response matrix for phistar mass 350-1000 (electron channel)

Response matrix for phistar mass 350-1000 (muon channel)

Final state radiation correction used in the $\phi_{\eta}^{*}$ cross-section measurement. The first uncertainty is statistical and the second is systematic.

Final state radiation correction used in the $y^{Z}-p_{T}^{Z}$ cross-section measurement. The first uncertainty is statistical and the second is systematic.

Final state radiation correction used in the $y^{Z}-\phi_{\eta}^{*}$ cross-section measurement. The first uncertainty is statistical and the second is systematic.

Correlation matrix of statistical uncertainty for one-dimensional $y^Z$ measurement.

Correlation matrix of statistical uncertainty for one-dimensional $p_{T}^{Z}$ measurement.

Correlation matrix of statistical uncertainty for one-dimensional $\phi_{\eta}^{*}$ measurement.

Correlation matrix of statistical uncertainty for two-dimensional $y^Z-p_{T}^{Z}$ measurement.

Correlation matrix of statistical uncertainty for two-dimensional $y^Z-\phi_{\eta}^{*}$ measurement.

Correlation matrix of efficiency uncertainty for one-dimensional $y^Z$ measurement.

Correlation matrix of efficiency uncertainty for one-dimensional $p_{T}^{Z}$ measurement.

Correlation matrix of efficiency uncertainty for one-dimensional $\phi_{\eta}^{*}$ measurement.

Correlation matrix of efficiency uncertainty for two-dimensional $y^Z-p_{T}^{Z}$ measurement.

Correlation matrix of efficiency uncertainty for two-dimensional $y^Z-\phi_{\eta}^{*}$ measurement.

Measured total $Z$-boson cross-section for different datasets. The first uncertainty is statistical, the second systematic, and the third is due to the luminosity.

Measured single differential cross-sections in interval regions of $y^{Z}$. The first uncertainty is statistical, the second systematic, and the third is due to the luminosity.

Measured single differential cross-sections in interval regions of $p_{T}^{Z}$. The first uncertainty is statistical, the second systematic, and the third is due to the luminosity.

Measured single differential cross-sections in interval regions of $\phi_{\eta}^{*}$. The first uncertainty is statistical, the second systematic, and the third is due to the luminosity.

Measured double differential cross-sections in interval regions of $y^{Z}$ and $p_{T}^{Z}$. The first uncertainty is statistical, the second systematic, and the third is due to the luminosity.

Measured double differential cross-sections in interval regions of $y^{Z}$ and $\phi_{\eta}^{*}$. The first uncertainty is statistical, the second systematic, and the third is due to the luminosity.

Systematic uncertainties in the single differential cross-sections in interval regions of $y^{Z}$, presented in percentage. The contributions from efficiency (Eff), background (BKG), final state radiation (FSR), closure test (Closure), and alignment and calibration (Alignment) are shown.

Systematic uncertainties in the single differential cross-sections in interval regions of $p_{T}^{Z}$, presented in percentage. The contributions from efficiency (Eff), background (BKG), final state radiation (FSR), closure test (Closure), and alignment and calibration (Alignment) are shown.

Systematic uncertainties in the single differential cross-sections in interval regions of $\phi_{\eta}^{*}$, presented in percentage. The contributions from efficiency (Eff), background (BKG), final state radiation (FSR), closure test (Closure), and alignment and calibration (Alignment) are shown.

Systematic uncertainties in the double differential cross-sections in interval regions of $y^{Z}$ and $p_{T}^{Z}$, presented in percentage. The contributions from efficiency (Eff), background (BKG), final state radiation (FSR), closure test (Closure), and alignment and calibration (Alignment) are shown.

Systematic uncertainties in the double differential cross-sections in interval regions of $y^{Z}$ and $\phi_{\eta}^{*}$, presented in percentage. The contributions from efficiency (Eff), background (BKG), final state radiation (FSR), closure test (Closure), and alignment and calibration (Alignment) are shown.

Pre-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except for the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor which is not defined pre-fit. The last bin includes the overflow.

Pre-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except for the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor which is not defined pre-fit. The last bin includes the overflow.

Pre-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except for the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor which is not defined pre-fit. The last bin includes the overflow.

Comparison of predicted and observed event yields in each of the control and signal regions in the dilepton channel after the fit to the data. The uncertainty band includes all uncertainties and their correlations.

Comparison of predicted and observed event yields in each of the control and signal regions in the single-lepton channels after the fit to the data. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $120\le p_T^H<200$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $200\le p_T^H<300$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the BDT discriminant in the dilepton SRs after the inclusive fit to the data for $p_{{T}}^{H}\ge 300$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $120\le p_T^H<200$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $200\le p_T^H<300$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the BDT discriminant in the single-lepton resolved SRs after the inclusive fit to the data for $p_{{T}}^{H}\ge 450$ GeV (yield only). The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the BDT discriminant in the single-lepton boosted SRs after the inclusive fit to the data for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the BDT discriminant in the single-lepton boosted SRs after the inclusive fit to the data for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for ${\Delta R^{{avg}}_{bb}}$ after the inclusive fit to the data in the single-lepton $CR^{5j}_{{\geq}4b\ lo}$ control region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).

Comparison between data and prediction for ${\Delta R^{{avg}}_{bb}}$ after the inclusive fit to the data in the single-lepton $CR^{5j}_{{\geq}4b\ hi}$ control region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).

Post-fit yields of signal ($S$) and total background ($B$) as a function of $\log (S/B)$, compared with data. Final-discriminant bins in all dilepton and single-lepton analysis regions are combined into bins of $\log (S/B)$, with the signal normalised to the SM prediction used for the computation of $\log (S/B)$. The signal is then shown normalised to the best-fit value and the SM prediction. The lower frame reports the ratio of data to background, and this is compared with the expected ${t\bar {t}H}$-signal-plus-background yield divided by the background-only yield for the best-fit signal strength (solid red line) and the SM prediction (dashed orange line).

Comparison between data and prediction for the reconstruction BDT score for the Higgs boson candidate identified using Higgs boson information, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the average $\Delta \eta $ between $b$-tagged jets, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the likelihood discriminant, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the average $\Delta R$ for all possible combinations of $b$-tagged jet pairs, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the DNN $P(H)$ output for the Higgs boson candidate after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Post-fit distribution of the reconstructed Higgs boson candidate mass for the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).

Post-fit distribution of the reconstructed Higgs boson candidate mass for the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).

Post-fit distribution of the reconstructed Higgs boson candidate mass for the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).

Fitted values of the ${t\bar {t}H}$ signal strength parameter in the individual channels and in the inclusive signal-strength measurement.

Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the fit. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.

Pre-fit distribution of the number of jets in the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the Standard Model expectation. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor that is not defined pre-fit.

Pre-fit distribution of the number of jets in the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the Standard Model expectation. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor that is not defined pre-fit.

Pre-fit distribution of the number of jets in the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the Standard Model expectation. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations, except the uncertainty in the $k({t\bar {t}+{\geq }1b})$ normalisation factor that is not defined pre-fit.

Post-fit distribution of the number of jets in the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Post-fit distribution of the number of jets in the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Post-fit distribution of the number of jets in the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Post-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the dilepton $SR^{\geq 4j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The last bin includes the overflow.

Post-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton resolved $SR^{\geq 6j}_{\geq 4b}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The last bin includes the overflow.

Post-fit distribution of the reconstructed Higgs boson candidate $p_T^H$ for the single-lepton boosted ${{SR}_{{boosted}}}$ signal region. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The last bin includes the overflow.

Signal-strength measurements in the individual STXS ${\hat{p}_{{T}}^{H}}$ bins, as well as the inclusive signal strength.

95% CL simplified template cross-section upper limits in the individual STXS ${\hat{p}_{{T}}^{H}}$ bins, as well as the inclusive limit. The observed limits are shown (solid black lines), together with the expected limits both in the background-only hypothesis (dotted black lines) and in the SM hypothesis (dotted red lines). In the case of the expected limits in the background-only hypothesis, one- and two-standard-deviation uncertainty bands are also shown. The hatched uncertainty bands correspond to the theory uncertainty in the fiducial cross-section prediction in each bin.

The ratios $S/B$ (black solid line, referring to the vertical axis on the left) and $S/\sqrt{B}$ (red dashed line, referring to the vertical axis on the right) for each category in the inclusive analysis in the dilepton channel (left) and in the single-lepton channels (right), where $S$ ($B$) is the number of selected signal (background) events predicted by the simulation and normalised to a luminosity of 139 fb$^{-1}$ .

Comparison between data and prediction for the $\Delta R$ between the Higgs candidate and the ${t\bar {t}}$ candidate system, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the number of $b$-tagged jet pairs with an invariant mass within 30 GeV of 125 GeV, after the inclusive fit to the data in the dilepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the reconstruction BDT score for the Higgs boson candidate identified using Higgs boson information, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the $\Delta R$ between the two highest ${p_{{T}}}$ $b$-tagged jets, after the inclusive fit to the data in the single-lepton resolved channel for $0\le p_T^H<120$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations.

Comparison between data and prediction for the sum of $b$-tagging discriminants of jets from Higgs, hadronic top and leptonic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).

Comparison between data and prediction for the sum of $b$-tagging discriminants of jets from Higgs, hadronic top and leptonic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).

Comparison between data and prediction for the hadronic top candidate invariant mass, after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).

Comparison between data and prediction for the hadronic top candidate invariant mass, after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).

Comparison between data and prediction for the fraction of the sum of $b$-tagging discriminants of all jets not associated to the Higgs or hadronic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $300\le p_T^H<450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).

Comparison between data and prediction for the fraction of the sum of $b$-tagging discriminants of all jets not associated to the Higgs or hadronic top candidates, after the inclusive fit to the data in the single-lepton boosted channel for $p_{{T}}^{H}\ge 450$ GeV. The ${t\bar {t}H}$ signal yield (solid red) is normalised to the fitted $\mu $ value from the inclusive fit. The dashed line shows the ${t\bar {t}H}$ signal distribution normalised to the total background prediction. The uncertainty band includes all uncertainties and their correlations. The first (last) bin includes the underflow (overflow).

Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $0\le {\hat{p}_{{T}}^{H}}<120$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.

Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $120\le {\hat{p}_{{T}}^{H}}<200$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.

Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $200\le {\hat{p}_{{T}}^{H}}<300$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.

Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for $300\le {\hat{p}_{{T}}^{H}}<450$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.

Ranking of the 20 nuisance parameters with the largest post-fit impact on $\mu $ in the STXS fit for ${\hat{p}_{{T}}^{H}}\ge 450$ GeV. Nuisance parameters corresponding to statistical uncertainties in the simulated event samples are not included. The empty blue rectangles correspond to the pre-fit impact on $\mu $ and the filled blue ones to the post-fit impact on $\mu $, both referring to the upper scale. The impact of each nuisance parameter, $\Delta \mu $, is computed by comparing the nominal best-fit value of $\mu $ with the result of the fit when fixing the considered nuisance parameter to its best-fit value, $\hat{\theta }$, shifted by its pre-fit (post-fit) uncertainties $\pm \Delta \theta $ ($\pm \Delta \hat{\theta }$). The black points show the pulls of the nuisance parameters relative to their nominal values, $\theta _0$. These pulls and their relative post-fit errors, $\Delta \hat{\theta }/\Delta \theta $, refer to the lower scale. For experimental uncertainties that are decomposed into several independent sources, NP X corresponds to the X$^{th}$ nuisance parameter, ordered by their impact on $\mu $. The `ljets' (`dilep') label refers to the single-lepton (dilepton) channel.

95% confidence level upper limits on signal-strength measurements in the individual STXS ${\hat{p}_{{T}}^{H}}$ bins, as well as the inclusive signal-strength limit, after the fit used to extract multiple signal-strength parameters. The observed limits are shown (solid black lines), together with the expected limits both in the background-only hypothesis (dotted black lines) and in the SM hypothesis (dotted red lines). In the case of the expected limits in the background-only hypothesis, one- and two-standard-deviation uncertainty bands are also shown.

Post-fit correlation matrix (in percentages) between the $\mu $ values obtained in the STXS bins.

Performance of the Higgs boson reconstruction algorithms. For each row of `truth' ${\hat{p}_{{T}}^{H}}$, the matrix shows (in percentages) the fraction of Higgs boson candidates which are truth-matched to ${b\bar {b}}$ decays, with reconstructed $p_T^H$ in the various bins of the dilepton (left), single lepton resolved (middle) and boosted (right) channels.

Pre-fit event yields in the dilepton signal regions and control regions. All uncertainties are included except the $k({t\bar {t}+{\geq }1b})$ uncertainty that is not defined pre-fit. For the ${t\bar {t}H}$ signal, the pre-fit yield values correspond to the theoretical prediction and corresponding uncertainties. `Other sources' refers to s-channel, t-channel, $tW$, $tWZ$, $tZq$, $Z+$ jets and diboson events.

Post-fit event yields in the dilepton signal regions and control regions, after the inclusive fit in all channels. All uncertainties are included, taking into account correlations. For the ${t\bar {t}H}$ signal, the post-fit yield and uncertainties correspond to those in the inclusive signal-strength measurement. `Other sources' refers to s-channel, t-channel, $tW$, $tWZ$, $tZq$, $Z+$ jets and diboson events.

Pre-fit event yields in the single-lepton resolved and boosted signal regions and control regions. All uncertainties are included except the $k({t\bar {t}+{\geq }1b})$ uncertainty that is not defined pre-fit. For the ${t\bar {t}H}$ signal, the pre-fit yield values correspond to the theoretical prediction and corresponding uncertainties. `Other top sources' refers to s-channel, t-channel, $tWZ$ and $tZq$ events.

Post-fit event yields in the single-lepton resolved and boosted signal regions and control regions, after the inclusive fit in all channels. All uncertainties are included, taking into account correlations. For the ${t\bar {t}H}$ signal, the post-fit yield and uncertainties correspond to those in the inclusive signal-strength measurement. `Other top sources' refers to s-channel, t-channel, $tWZ$ and $tZq$ events.

Breakdown of the contributions to the uncertainties in $\mu$. The contributions from the different sources of uncertainty are evaluated after the fit. The $\Delta \mu $ values are obtained by repeating the fit after having fixed a certain set of nuisance parameters corresponding to a group of systematic uncertainties, and then evaluating $(\Delta \mu)^2$ by subtracting the resulting squared uncertainty of $\mu $ from its squared uncertainty found in the full fit. The same procedure is followed when quoting the effect of the ${t\bar {t}+{\geq }1b}$ normalisation. The total uncertainty is different from the sum in quadrature of the different components due to correlations between nuisance parameters existing in the fit.

Fraction (in percentages) of signal events, after SR and CR selections, originating from $b\bar {b}$, $WW$ and other remaining Higgs boson decay modes in the dilepton channel.

Fraction (in percentages) of signal events, after SR and CR selections, originating from $b\bar {b}$, $WW$ and other remaining Higgs boson decay modes in the single-lepton channels.

Predicted SM ${t\bar {t}H}$ cross-section in each of the five STXS ${\hat{p}_{{T}}^{H}}$ bins and signal acceptance times efficiency (including all event selection criteria) in each STXS bin as well as for the inclusive ${\hat{p}_{{T}}^{H}}$ range.

Number of expected signal events before the fit, after each selection requirement applied to enter the dilepton channel $SR^{\geq 4j}_{\geq 4b}$ region. All ${t\bar {t}H}$ signal events are included, regardless of the $H$ or ${t\bar {t}H}$ decay mode. All object corrections are applied, except for the initial number of events which is calculated using the NLO QCD+EW theoretical prediction. All quoted numbers are rounded to unity. More details on the selection criteria can be found in the text.

Number of expected signal events before the fit, after each selection requirement applied to enter the single-lepton channel resolved $SR^{\geq 6j}_{\geq 4b}$ region. All ${t\bar {t}H}$ signal events are included, regardless of the $H$ or ${t\bar {t}H}$ decay mode. All object corrections are applied, except for the initial number of events which is calculated using the NLO QCD+EW theoretical prediction. All quoted numbers are rounded to unity. More details on the selection criteria can be found in the text.

Number of expected signal events before the fit, after each selection requirement applied to enter the single-lepton channel boosted $SR_{boosted}$ region. All ${t\bar {t}H}$ signal events are included, regardless of the $H$ or ${t\bar {t}H}$ decay mode. All object corrections are applied, except for the initial number of events which is calculated using the NLO QCD+EW theoretical prediction. All quoted numbers are rounded to unity. More details on the selection criteria can be found in the text.

Single-differential production cross-sections for nonprompt $J/\psi$ mesons as a function of $p_\text{T}$. The first uncertainties are statistical, the second are correlated systematic uncertainties shared between intervals, and the last are uncorrelated systematic uncertainties.

Single-differential production cross-sections for prompt $J/\psi$ mesons as a function of $y$. The first uncertainties are statistical, the second are correlated systematic uncertainties shared between intervals, and the last are uncorrelated systematic uncertainties.

Single-differential production cross-sections for nonprompt $J/\psi$ mesons as a function of $y$. The first uncertainties are statistical, the second are correlated systematic uncertainties shared between intervals, and the last are uncorrelated systematic uncertainties.

Fraction of nonprompt $J/\psi$ mesons (in \%) in ($p_\text{T},y$) intervals. The first uncertainty is statistical and the second is systematic.

Nuclear modification factor $R_{p\text{Pb}}$ for prompt $J/\psi$ mesons as a function of $y$. The first uncertainty is statistical and the second is systematic.

Nuclear modification factor $R_{p\text{Pb}}$ for nonprompt $J/\psi$ mesons as a function of $y$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 8 TeV and 5 TeV measurements for prompt $J/\psi$ mesons as a function of $p_\text{T}$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 8 TeV and 5 TeV measurements for prompt $J/\psi$ mesons as a function of $y$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 13 TeV and 5 TeV measurements for prompt $J/\psi$ mesons as a function of $p_\text{T}$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 13 TeV and 5 TeV measurements for prompt $J/\psi$ mesons as a function of $y$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 8 TeV and 5 TeV measurements for nonprompt $J/\psi$ mesons as a function of $p_\text{T}$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 8 TeV and 5 TeV measurements for nonprompt $J/\psi$ mesons as a function of $y$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 13 TeV and 5 TeV measurements for nonprompt $J/\psi$ mesons as a function of $p_\text{T}$. The first uncertainty is statistical and the second is systematic.

Cross-section ratios between 13 TeV and 5 TeV measurements for nonprompt $J/\psi$ mesons as a function of $y$. The first uncertainty is statistical and the second is systematic.

Relative changes of cross-sections (in \%), for a polarisation of $\lambda_{\theta}=-0.2$ rather than zero, in ($p_\text{T},y$) intervals.

Relative changes of cross-sections (in \%), for a polarisation of $\lambda_{\theta}=-1$ rather than zero, in ($p_\text{T},y$) intervals.

Relative changes of cross-sections (in \%), for a polarisation of $\lambda_{\theta}=+1$ rather than zero, in ($p_\text{T},y$) intervals.

The absolute differential cross-section measured in the fiducial phase-space as a function of the minimum $\Delta R$ between the photon and the leptons in the electron-muon channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.

The absolute differential cross-section measured in the fiducial phase-space as a function of the $\Delta\phi$ between the two leptons in the electron-muon channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.

The absolute differential cross-section measured in the fiducial phase-space as a function of the $|\Delta\eta|$ between the two leptons in the electron-muon channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.

The normalised differential cross-section measured in the fiducial phase-space as a function of the photon pT in the electron-muon channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.

The normalised differential cross-section measured in the fiducial phase-space as a function of the photon $|\eta|$ in the electron-muon channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.

The normalised differential cross-section measured in the fiducial phase-space as a function of the minimum $\Delta R$ between the photon and the leptons in the electron-muon channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.

The normalised differential cross-section measured in the fiducial phase-space as a function of the $\Delta\phi$ between the two leptons in the electron-muon channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.

The normalised differential cross-section measured in the fiducial phase-space as a function of the $|\Delta\eta|$ between the two leptons in the electron-muon channel. The uncertainty is decomposed into four components which are the signal modelling uncertainty, the background modelling uncertainty, the experimental uncertainty, and the data statistical uncertainty.

The total correlation matrix of the absolute differential cross-section measured in the fiducial phase-space as a function of the photon pT in the electron-muon channel. The individual systematic uncertainties are symmetrized before deriving the correlation matrix.

The total correlation matrix of the absolute differential cross-section measured in the fiducial phase-space as a function of the photon $|\eta|$ in the electron-muon channel. The individual systematic uncertainties are symmetrized before deriving the correlation matrix.

The total correlation matrix of the absolute differential cross-section measured in the fiducial phase-space as a function of the minimum $\Delta R$ between the photon and the leptons in the electron-muon channel. The individual systematic uncertainties are symmetrized before deriving the correlation matrix.

The total correlation matrix of the absolute differential cross-section measured in the fiducial phase-space as a function of the $\Delta\phi$ between the two leptons in the electron-muon channel. The individual systematic uncertainties are symmetrized before deriving the correlation matrix.

The total correlation matrix of the absolute differential cross-section measured in the fiducial phase-space as a function of the $|\Delta\eta|$ between the two leptons in the electron-muon channel. The individual systematic uncertainties are symmetrized before deriving the correlation matrix.

The total correlation matrix of the normalised differential cross-section measured in the fiducial phase-space as a function of the photon pT in the electron-muon channel. The individual systematic uncertainties are symmetrized before deriving the correlation matrix.

The total correlation matrix of the normalised differential cross-section measured in the fiducial phase-space as a function of the photon $|\eta|$ in the electron-muon channel. The individual systematic uncertainties are symmetrized before deriving the correlation matrix.

The total correlation matrix of the normalised differential cross-section measured in the fiducial phase-space as a function of the minimum $\Delta R$ between the photon and the leptons in the electron-muon channel. The individual systematic uncertainties are symmetrized before deriving the correlation matrix.

The total correlation matrix of the normalised differential cross-section measured in the fiducial phase-space as a function of the $\Delta\phi$ between the two leptons in the electron-muon channel. The individual systematic uncertainties are symmetrized before deriving the correlation matrix.

The total correlation matrix of the normalised differential cross-section measured in the fiducial phase-space as a function of the $|\Delta\eta|$ between the two leptons in the electron-muon channel. The individual systematic uncertainties are symmetrized before deriving the correlation matrix.

The statistical correlation matrix of all the absolute differential cross-sections measured in the fiducial phase-space in the electron-muon channel.

The statistical correlation matrix of all the normalised differential cross-sections measured in the fiducial phase-space in the electron-muon channel.

Fiducial region definition.

Differential cross-sections for EW $Zjj$ production as a function of $\Delta\phi_{jj}$ with breakdown of associated uncertainties. The statistical uncertainty is correlated across bins according to the statistical cross correlation matrix presented in Table 21.

Differential cross-sections for inclusive $Zjj$ production in the EW $Zjj$ signal region ($N^\mathrm{gap}_\mathrm{jets}=0$, $\xi_Z < 0.5$) as a function of $m_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in the EW $Zjj$ signal region ($N^\mathrm{gap}_\mathrm{jets}=0$, $\xi_Z < 0.5$) as a function of $\Delta y_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in the EW $Zjj$ signal region ($N^\mathrm{gap}_\mathrm{jets}=0$, $\xi_Z < 0.5$) as a function of $p_{\mathrm{T},\ell\ell}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in the EW $Zjj$ signal region ($N^\mathrm{gap}_\mathrm{jets}=0$, $\xi_Z < 0.5$) as a function of $\Delta\phi_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRa ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z < 0.5$) as a function of $m_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRa ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z < 0.5$) as a function of $\Delta y_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRa ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z < 0.5$) as a function of $p_{\mathrm{T},\ell\ell}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRa ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z < 0.5$) as a function of $\Delta\phi_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRb ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z > 0.5$) as a function of $m_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRb ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z > 0.5$) as a function of $\Delta y_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRb ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z > 0.5$) as a function of $p_{\mathrm{T},\ell\ell}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRb ($N^\mathrm{gap}_\mathrm{jets} \geq 1$, $\xi_Z > 0.5$) as a function of $\Delta\phi_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRc ($N^\mathrm{gap}_\mathrm{jets} = 0$, $\xi_Z > 0.5$) as a function of $m_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRc ($N^\mathrm{gap}_\mathrm{jets} = 0$, $\xi_Z > 0.5$) as a function of $\Delta y_{jj}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRc ($N^\mathrm{gap}_\mathrm{jets} = 0$, $\xi_Z > 0.5$) as a function of $p_{\mathrm{T},\ell\ell}$ with breakdown of associated uncertainties.

Differential cross-sections for inclusive $Zjj$ production in control region CRc ($N^\mathrm{gap}_\mathrm{jets} = 0$, $\xi_Z > 0.5$) as a function of $\Delta\phi_{jj}$ with breakdown of associated uncertainties.

Statistical correlation between bins of the differential cross-section measurements of EW $Zjj$ production in the signal region ($N^\mathrm{gap}_\mathrm{jets} = 0$, $\xi_Z < 0.5$). The associated measured central values, statistical uncertainty magnitude and bin ranges are presented in Tables 1-4. The bins are presented in order such that for example mjj_bin_1 spans $m_{jj} \in (1000,1500)$ GeV (see Table 1), while pT_ll_bin7 spans $p_\mathrm{T}^{ll} \in (200,275)$ GeV (see Table 3).

Differential fiducial cross section of the Z boson $|y|$ in events with $Z(\rightarrow ll)\ge+1$ b-jets. The statistical uncertainties and the individual components of systematic uncertainty are given in each bin. Statistical uncertainties are bin-to-bin uncorrelated.

Differential fiducial cross section of the leading b-jet $|y|$ in events with $Z(\rightarrow ll)\ge+1$ b-jets. The statistical uncertainties and the individual components of systematic uncertainty are given in each bin. Statistical uncertainties are bin-to-bin uncorrelated.

Differential fiducial cross section of the $\Delta \phi$ between Z boson and leading $b$-jet in events with $Z(\rightarrow ll)\ge+1$ b-jets. The statistical uncertainties and the individual components of systematic uncertainty are given in each bin. Statistical uncertainties are bin-to-bin uncorrelated.

Differential fiducial cross section of the $\Delta y$ between Z boson and leading $b$-jet in events with $Z(\rightarrow ll)\ge+1$ b-jets. The statistical uncertainties and the individual components of systematic uncertainty are given in each bin. Statistical uncertainties are bin-to-bin uncorrelated.

Differential fiducial cross section of the $\Delta R$ between Z boson and leading $b$-jet in events with $Z(\rightarrow ll)\ge+1$ b-jets. The statistical uncertainties and the individual components of systematic uncertainty are given in each bin. Statistical uncertainties are bin-to-bin uncorrelated.

Differential fiducial cross section of the $\Delta \phi$ between the first two leading $b$-jets in events with $Z(\rightarrow ll)\ge+2$ b-jets. The statistical uncertainties and the individual components of systematic uncertainty are given in each bin. Statistical uncertainties are bin-to-bin uncorrelated.

Differential fiducial cross section of the $\Delta y$ between the first two leading $b$-jets in events with $Z(\rightarrow ll)\ge+2$ b-jets. The statistical uncertainties and the individual components of systematic uncertainty are given in each bin. Statistical uncertainties are bin-to-bin uncorrelated.

Differential fiducial cross section of the $\Delta R$ between the first two leading $b$-jets in events with $Z(\rightarrow ll)\ge+2$ b-jets. The statistical uncertainties and the individual components of systematic uncertainty are given in each bin. Statistical uncertainties are bin-to-bin uncorrelated.

Differential fiducial cross section of the invariant mass of the first two leading $b$-jets in events with $Z(\rightarrow ll)\ge+2$ b-jets. The statistical uncertainties and the individual components of systematic uncertainty are given in each bin. Statistical uncertainties are bin-to-bin uncorrelated.

Differential fiducial cross section of the Z boson $p_{\text{T}}$ in events with $Z(\rightarrow ll)\ge+2$ b-jets. The statistical uncertainties and the individual components of systematic uncertainty are given in each bin. Statistical uncertainties are bin-to-bin uncorrelated.

Differential fiducial cross section of the $p_{\text{T}}$ of the first two leading $b$-jets in events with $Z(\rightarrow ll)\ge+2$ b-jets. The statistical uncertainties and the individual components of systematic uncertainty are given in each bin. Statistical uncertainties are bin-to-bin uncorrelated.

Differential fiducial cross section of the ratio between the $p_{\text{T}}$ and the invariant mass of the first two leading $b$-jets in events with $Z(\rightarrow ll)\ge+2$ b-jets. The statistical uncertainties and the individual components of systematic uncertainty are given in each bin. Statistical uncertainties are bin-to-bin uncorrelated.

The measured fiducial cross section vs $E_{\mathrm{T}}^\gamma$. The central values are provided along with the statistical and systematic uncertainties together with the sign information. The statistical and "Uncor" uncertainty should be treated as uncorrelated bin-to-bin, while the rest are correlated between bins, and they are written as signed NP variations. The parton-to-particle correction factor $C_{theory}$ is the ratio of the cross-section predicted by Sherpa LO samples at particle level within the fiducial phase-space region defined in Table 4 to the predicted cross-section at parton level within the same fiducial region but with the smooth-cone isolation prescription defined above replacing the particle-level photon isolation criterion, and with Born-level leptons in place of dressed leptons. This correction should be applied on fixed order parton-level calculations. The systematic uncertainty is evaluated from a comparison with the correction factor obtained using events generated with Sherpa 2.2.2 at NLO. The uncertainty is defined as Max(stat error, systematic difference between Sherpa LO and Sherpa 2.2.2 NLO), and cannot be considered correlated bin-to-bin. In the case that the calculations are valid for dressed leptons, a modified correction factor excluding the Born-to-dressed lepton correction should be applied instead. This correction only takes into account the particle-level isolation criteria, and is provided separately here. The Sherpa 2.2.8 NLO cross-sections given below include a small contribution from EW $Z\gamma jj$ production.

The measured fiducial cross section vs $|\eta^\gamma|$. The central values are provided along with the statistical and systematic uncertainties together with the sign information. The statistical and "Uncor" uncertainty should be treated as uncorrelated bin-to-bin, while the rest are correlated between bins, and they are written as signed NP variations. The parton-to-particle correction factor $C_{theory}$ is the ratio of the cross-section predicted by Sherpa LO samples at particle level within the fiducial phase-space region defined in Table 4 to the predicted cross-section at parton level within the same fiducial region but with the smooth-cone isolation prescription defined above replacing the particle-level photon isolation criterion, and with Born-level leptons in place of dressed leptons. This correction should be applied on fixed order parton-level calculations. The systematic uncertainty is evaluated from a comparison with the correction factor obtained using events generated with SHERPA 2.2.2 at NLO. In the case that the calculations are valid for dressed leptons, a modified correction factor excluding the Born-to-dressed lepton correction should be applied instead. This correction only takes into account the particle-level isolation criteria, and is provided separately here. The Sherpa 2.2.8 NLO cross-sections given below include a small contribution from EW $Z\gamma jj$ production.

The measured fiducial cross section vs $|\eta^\gamma|$. The central values are provided along with the statistical and systematic uncertainties together with the sign information. The statistical and "Uncor" uncertainty should be treated as uncorrelated bin-to-bin, while the rest are correlated between bins, and they are written as signed NP variations. The parton-to-particle correction factor $C_{theory}$ is the ratio of the cross-section predicted by Sherpa LO samples at particle level within the fiducial phase-space region defined in Table 4 to the predicted cross-section at parton level within the same fiducial region but with the smooth-cone isolation prescription defined above replacing the particle-level photon isolation criterion, and with Born-level leptons in place of dressed leptons. This correction should be applied on fixed order parton-level calculations. The systematic uncertainty is evaluated from a comparison with the correction factor obtained using events generated with Sherpa 2.2.2 at NLO. The uncertainty is defined as Max(stat error, systematic difference between Sherpa LO and Sherpa 2.2.2 NLO), and cannot be considered correlated bin-to-bin. In the case that the calculations are valid for dressed leptons, a modified correction factor excluding the Born-to-dressed lepton correction should be applied instead. This correction only takes into account the particle-level isolation criteria, and is provided separately here. The Sherpa 2.2.8 NLO cross-sections given below include a small contribution from EW $Z\gamma jj$ production.

The measured fiducial cross section vs $m(\ell\ell\gamma)$. The central values are provided along with the statistical and systematic uncertainties together with the sign information. The statistical and "Uncor" uncertainty should be treated as uncorrelated bin-to-bin, while the rest are correlated between bins, and they are written as signed NP variations. The parton-to-particle correction factor $C_{theory}$ is the ratio of the cross-section predicted by Sherpa LO samples at particle level within the fiducial phase-space region defined in Table 4 to the predicted cross-section at parton level within the same fiducial region but with the smooth-cone isolation prescription defined above replacing the particle-level photon isolation criterion, and with Born-level leptons in place of dressed leptons. This correction should be applied on fixed order parton-level calculations. The systematic uncertainty is evaluated from a comparison with the correction factor obtained using events generated with SHERPA 2.2.2 at NLO. In the case that the calculations are valid for dressed leptons, a modified correction factor excluding the Born-to-dressed lepton correction should be applied instead. This correction only takes into account the particle-level isolation criteria, and is provided separately here. The Sherpa 2.2.8 NLO cross-sections given below include a small contribution from EW $Z\gamma jj$ production.

The measured fiducial cross section vs $m(\ell\ell\gamma)$. The central values are provided along with the statistical and systematic uncertainties together with the sign information. The statistical and "Uncor" uncertainty should be treated as uncorrelated bin-to-bin, while the rest are correlated between bins, and they are written as signed NP variations. The parton-to-particle correction factor $C_{theory}$ is the ratio of the cross-section predicted by Sherpa LO samples at particle level within the fiducial phase-space region defined in Table 4 to the predicted cross-section at parton level within the same fiducial region but with the smooth-cone isolation prescription defined above replacing the particle-level photon isolation criterion, and with Born-level leptons in place of dressed leptons. This correction should be applied on fixed order parton-level calculations. The systematic uncertainty is evaluated from a comparison with the correction factor obtained using events generated with Sherpa 2.2.2 at NLO. The uncertainty is defined as Max(stat error, systematic difference between Sherpa LO and Sherpa 2.2.2 NLO), and cannot be considered correlated bin-to-bin. In the case that the calculations are valid for dressed leptons, a modified correction factor excluding the Born-to-dressed lepton correction should be applied instead. This correction only takes into account the particle-level isolation criteria, and is provided separately here. The Sherpa 2.2.8 NLO cross-sections given below include a small contribution from EW $Z\gamma jj$ production.

The measured fiducial cross section vs $p_{\mathrm{T}}^{\ell\ell\gamma}$. The central values are provided along with the statistical and systematic uncertainties together with the sign information. The statistical and "Uncor" uncertainty should be treated as uncorrelated bin-to-bin, while the rest are correlated between bins, and they are written as signed NP variations. The parton-to-particle correction factor $C_{theory}$ is the ratio of the cross-section predicted by Sherpa LO samples at particle level within the fiducial phase-space region defined in Table 4 to the predicted cross-section at parton level within the same fiducial region but with the smooth-cone isolation prescription defined above replacing the particle-level photon isolation criterion, and with Born-level leptons in place of dressed leptons. This correction should be applied on fixed order parton-level calculations. The systematic uncertainty is evaluated from a comparison with the correction factor obtained using events generated with SHERPA 2.2.2 at NLO. In the case that the calculations are valid for dressed leptons, a modified correction factor excluding the Born-to-dressed lepton correction should be applied instead. This correction only takes into account the particle-level isolation criteria, and is provided separately here. The Sherpa 2.2.8 NLO cross-sections given below include a small contribution from EW $Z\gamma jj$ production.

The measured fiducial cross section vs $p_{\mathrm{T}}^{\ell\ell\gamma}$. The central values are provided along with the statistical and systematic uncertainties together with the sign information. The statistical and "Uncor" uncertainty should be treated as uncorrelated bin-to-bin, while the rest are correlated between bins, and they are written as signed NP variations. The parton-to-particle correction factor $C_{theory}$ is the ratio of the cross-section predicted by Sherpa LO samples at particle level within the fiducial phase-space region defined in Table 4 to the predicted cross-section at parton level within the same fiducial region but with the smooth-cone isolation prescription defined above replacing the particle-level photon isolation criterion, and with Born-level leptons in place of dressed leptons. This correction should be applied on fixed order parton-level calculations. The systematic uncertainty is evaluated from a comparison with the correction factor obtained using events generated with Sherpa 2.2.2 at NLO. The uncertainty is defined as Max(stat error, systematic difference between Sherpa LO and Sherpa 2.2.2 NLO), and cannot be considered correlated bin-to-bin. In the case that the calculations are valid for dressed leptons, a modified correction factor excluding the Born-to-dressed lepton correction should be applied instead. This correction only takes into account the particle-level isolation criteria, and is provided separately here. The Sherpa 2.2.8 NLO cross-sections given below include a small contribution from EW $Z\gamma jj$ production.

The measured fiducial cross section vs $\Delta\phi(ll,\gamma)$. The central values are provided along with the statistical and systematic uncertainties together with the sign information. The statistical and "Uncor" uncertainty should be treated as uncorrelated bin-to-bin, while the rest are correlated between bins, and they are written as signed NP variations. The parton-to-particle correction factor $C_{theory}$ is the ratio of the cross-section predicted by Sherpa LO samples at particle level within the fiducial phase-space region defined in Table 4 to the predicted cross-section at parton level within the same fiducial region but with the smooth-cone isolation prescription defined above replacing the particle-level photon isolation criterion, and with Born-level leptons in place of dressed leptons. This correction should be applied on fixed order parton-level calculations. The systematic uncertainty is evaluated from a comparison with the correction factor obtained using events generated with SHERPA 2.2.2 at NLO. In the case that the calculations are valid for dressed leptons, a modified correction factor excluding the Born-to-dressed lepton correction should be applied instead. This correction only takes into account the particle-level isolation criteria, and is provided separately here. The Sherpa 2.2.8 NLO cross-sections given below include a small contribution from EW $Z\gamma jj$ production.

The measured fiducial cross section vs $\Delta\phi(ll,\gamma)$. The central values are provided along with the statistical and systematic uncertainties together with the sign information. The statistical and "Uncor" uncertainty should be treated as uncorrelated bin-to-bin, while the rest are correlated between bins, and they are written as signed NP variations. The parton-to-particle correction factor $C_{theory}$ is the ratio of the cross-section predicted by Sherpa LO samples at particle level within the fiducial phase-space region defined in Table 4 to the predicted cross-section at parton level within the same fiducial region but with the smooth-cone isolation prescription defined above replacing the particle-level photon isolation criterion, and with Born-level leptons in place of dressed leptons. This correction should be applied on fixed order parton-level calculations. The systematic uncertainty is evaluated from a comparison with the correction factor obtained using events generated with Sherpa 2.2.2 at NLO. The uncertainty is defined as Max(stat error, systematic difference between Sherpa LO and Sherpa 2.2.2 NLO), and cannot be considered correlated bin-to-bin. In the case that the calculations are valid for dressed leptons, a modified correction factor excluding the Born-to-dressed lepton correction should be applied instead. This correction only takes into account the particle-level isolation criteria, and is provided separately here. The Sherpa 2.2.8 NLO cross-sections given below include a small contribution from EW $Z\gamma jj$ production.

The measured fiducial cross section vs $p_{\mathrm{T}}^{\ell\ell\gamma}/m(\ell\ell\gamma)$. The central values are provided along with the statistical and systematic uncertainties together with the sign information. The statistical and "Uncor" uncertainty should be treated as uncorrelated bin-to-bin, while the rest are correlated between bins, and they are written as signed NP variations. The parton-to-particle correction factor $C_{theory}$ is the ratio of the cross-section predicted by Sherpa LO samples at particle level within the fiducial phase-space region defined in Table 4 to the predicted cross-section at parton level within the same fiducial region but with the smooth-cone isolation prescription defined above replacing the particle-level photon isolation criterion, and with Born-level leptons in place of dressed leptons. This correction should be applied on fixed order parton-level calculations. The systematic uncertainty is evaluated from a comparison with the correction factor obtained using events generated with SHERPA 2.2.2 at NLO. In the case that the calculations are valid for dressed leptons, a modified correction factor excluding the Born-to-dressed lepton correction should be applied instead. This correction only takes into account the particle-level isolation criteria, and is provided separately here. The Sherpa 2.2.8 NLO cross-sections given below include a small contribution from EW $Z\gamma jj$ production.

The measured fiducial cross section vs $p_{\mathrm{T}}^{\ell\ell\gamma}/m(\ell\ell\gamma)$. The central values are provided along with the statistical and systematic uncertainties together with the sign information. The statistical and "Uncor" uncertainty should be treated as uncorrelated bin-to-bin, while the rest are correlated between bins, and they are written as signed NP variations. The parton-to-particle correction factor $C_{theory}$ is the ratio of the cross-section predicted by Sherpa LO samples at particle level within the fiducial phase-space region defined in Table 4 to the predicted cross-section at parton level within the same fiducial region but with the smooth-cone isolation prescription defined above replacing the particle-level photon isolation criterion, and with Born-level leptons in place of dressed leptons. This correction should be applied on fixed order parton-level calculations. The systematic uncertainty is evaluated from a comparison with the correction factor obtained using events generated with Sherpa 2.2.2 at NLO. The uncertainty is defined as Max(stat error, systematic difference between Sherpa LO and Sherpa 2.2.2 NLO), and cannot be considered correlated bin-to-bin. In the case that the calculations are valid for dressed leptons, a modified correction factor excluding the Born-to-dressed lepton correction should be applied instead. This correction only takes into account the particle-level isolation criteria, and is provided separately here. The Sherpa 2.2.8 NLO cross-sections given below include a small contribution from EW $Z\gamma jj$ production.

The combined differential $D^{*\pm}$-production cross section as a function of $Q^2$, with its uncorrelated and correlated uncertainties.

The combined differential $D^{*\pm}$-production cross section as a function of $y$, with its uncorrelated and correlated uncertainties.

The combined double-differential $D^{*\pm}$-production cross section as a function of $Q^2$ and $y$, with its uncorrelated and correlated uncertainties.

Diffractive DIS dijet cross section measured differentially as a function of $\log x_P$. The global normalisation uncertainty of $7.8\%$ is not listed explicitly but is included in the total systematic uncertainty. The last two column show the correction factors for hadronisation and QED radiation, respectively. (Note: assume typo in Table 2 that $x_P$ really means $\log x_P$.).

Diffractive DIS dijet cross section measured differentially as a function of $z_P$. The global normalisation uncertainty of $7.8\%$ is not listed explicitly but is included in the total systematic uncertainty. The last two column show the correction factors for hadronisation and QED radiation, respectively.

Diffractive DIS dijet cross section measured differentially as a function of $p^{\ast}_{T,1}$.

Diffractive DIS dijet cross section measured differentially as a function of $p^{\ast}_{T,2}$.

Diffractive DIS dijet cross section measured differentially as a function of $\langle p^{\ast}_{T}\rangle$.

Diffractive DIS dijet cross section measured differentially as a function of $\Delta\eta^{\ast}$.

Diffractive DIS dijet cross section measured differentially as a function of $z_P$ and $Q^2$.

Diffractive DIS dijet cross section measured differentially as a function of $p^{\ast}_{\rm T,1}$ and $Q^2$.

Single differential production cross sections of prompt J/PSI mesons and of J/PSI from B decay as a function of rapidity in the BACKWARD region. The errors shown are statistical and the uncorrelated and correlated components of the systematic uncertainties.

Double differential production cross sections of prompt J/PSI mesons as a function of transverse momentum and rapidity in the FORWARD region. The errors shown are statistical and the uncorrelated and correlated components of the systematic uncertainties.

Double differential production cross sections of J/PSI mesons from B decays as a function of transverse momentum and rapidity in the FORWARD region. The errors shown are statistical and the uncorrelated and correlated components of the systematic uncertainties.

The nuclear modification factor RpPB for PT < 14 GeV/c in the BACKWARD and FORWARD regions.

The FORWARD/BACKWARD production ratio R(FB) as a function of rapidity for PT < 14 GeV/c.

The FORWARD/BACKWARD production ratioo (R(FB) as a function of PT with |yrap|=2.5-4.0.

Double Differential distributions for B/S0 production.

PT distributions for B0 production.

PT distributions for B+ production.

PT distributions for B/S0 production.

Rapidity distributions for B0 production.

Rapidity distributions for B+ production.

Rapidity distributions for B/S0 production.

The double-differential cross sections for prompt J/PSI production (assuming no polarisation) and production of J/PSI from b-hadron decays as a function of transverse momentum for the rapidity range 2.5-3.0. Also shown in the final column is the fraction (in %) of J/PSIs from the latter.

The double-differential cross sections for prompt J/PSI production (assuming no polarisation) and production of J/PSI from b-hadron decays as a function of transverse momentum for the rapidity range 3.0-3.5. Also shown in the final column is the fraction (in %) of J/PSIs from the latter.

The double-differential cross sections for prompt J/PSI production (assuming no polarisation) and production of J/PSI from b-hadron decays as a function of transverse momentum for the rapidity range 3.5-4.0. Also shown in the final column is the fraction (in %) of J/PSIs from the latter.

The double-differential cross sections for prompt J/PSI production (assuming no polarisation) and production of J/PSI from b-hadron decays as a function of transverse momentum for the rapidity range 4.0-4.5. Also shown in the final column is the fraction (in %) of J/PSIs from the latter.

The total integrated cross sections for UPSILON 1S 2S and 3S times their dimuon branching ratio in the rapidity range 2.0-4.5 and transverse momentum 0-15 GeV/c.

Differential production cross section for UPSILON 1S 2s and 3S mesons times their dimuon branching fraction as a function of transverse momentum ;.

Differential production cross section for UPSILON 1S 2s and 3S mesons times their dimuon branching fraction as a function of rapidity ;.

The double-differential cross section (times the dimuon decay probability) for the production of UPSILON 1S, 2S and 3S mesons as a function of their transverse momentum for the rapidity range 2.0-2.5, assuming no polarisation.

The double-differential cross section (times the dimuon decay probability) for the production of UPSILON 1S, 2S and 3S mesons as a function of their transverse momentum for the rapidity range 2.5-3.0, assuming no polarisation.

The double-differential cross section (times the dimuon decay probability) for the production of UPSILON 1S, 2S and 3S mesons as a function of their transverse momentum for the rapidity range 3.0-3.5, assuming no polarisation.

The double-differential cross section (times the dimuon decay probability) for the production of UPSILON 1S, 2S and 3S mesons as a function of their transverse momentum for the rapidity range 3.5-4.0, assuming no polarisation.

The double-differential cross section (times the dimuon decay probability) for the production of UPSILON 1S, 2S and 3S mesons as a function of their transverse momentum for the rapidity range 4.0-4.5, assuming no polarisation.

Ratios of the cross-sections for UPSILON(2S)->MU+MU- and UPSILON(3S)->MU+MU- with respect toe UPSILON(1S)->MU+MU- as a function of PT in the rapidity range 2.0-4.0 ;.

Ratios of the cross-sections for UPSILON(2S)->MU+MU- and UPSILON(3S)->MU+MU- with respect to UPSILON(1S)->MU+MU- as a function of rapidity in the rapidity range 2.0-4.0 ;.

Differential production cross-sections with respect to transverse momentum, dsigma / dp_T, of D*(2010)+ mesons or their charge conjugates in proton-proton collisions at center-of-mass (CM) energy sqrt(s) = 7 TeV. Measured in bins of hadron transverse momentum (p_T) and rapidity (y) with respect to the beam axis, where p_T and y are measured in the CM frame. Contributions of charm hadrons from the decays of b-hadrons have been removed.

Differential production cross-sections with respect to transverse momentum, dsigma / dp_T, of D_s+ mesons or their charge conjugates in proton-proton collisions at center-of-mass (CM) energy sqrt(s) = 7 TeV. Measured in bins of hadron transverse momentum (p_T) and rapidity (y) with respect to the beam axis, where p_T and y are measured in the CM frame. Contributions of charm hadrons from the decays of b-hadrons have been removed.

Combined cross section for c-cbar production. The second systematic error is the uncertainty due to the fragmentation functions.

Bin integrated production cross sections for prompt LAMBDA/C+ + CC baryons in YRAP bins integrated over PT from 2-8 GeV/c.

Normalized differential cross-section $d\ln\sigma(pp\rightarrow J/\psi \Lambda_c^+ X)/dp_T(J/\psi)$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(\Lambda_c^+)<4$, $3<p_T(\Lambda_c^+) <12$ GeV/$c$ region.

Normalized differential cross-section $d\ln\sigma(pp\rightarrow J/\psi D^0 X)/dp_T(D^0)$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ region.

Normalized differential cross-section $d\ln\sigma(pp\rightarrow J/\psi D^+ X)/dp_T(D^+)$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$ region.

Normalized differential cross-section $d\ln\sigma(pp\rightarrow J/\psi D_s^+ X)/dp_T(D_s^+)$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(D_s^+)<4$, $3<p_T(D_s^+)<12$ GeV/$c$ region.

Normalized differential cross-section $d\ln\sigma(pp\rightarrow J/\psi \Lambda_c^+ X)/dp_T(\Lambda_c^+)$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(\Lambda_c^+)<4$, $3<p_T(\Lambda_c^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D^0 X \right)}{dp_T( D^0 )}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D^+ X \right)}{dp_T( D )}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$, $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D_s^+ X \right)}{dp_T( D )}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$, $2<y(D_s^+)<4$, $3<p_T(D_s^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^+ D^+ X \right)}{dp_T( D^+ )}$ for $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^+ D_s^+ X \right)}{dp_T( D )}$ for $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$, $2<y(D_s^+)<4$, $3<p_T(D_s^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 \bar{D}^0 X \right)}{dp_T( D )}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D^- X \right)}{dp_T( D )}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12~GeV/c$, $2<y(D^-)<4$, $3<p_T(D^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D_s^- X \right)}{dp_T( D )}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$, $2<y(D_s^-)<4$, $3<p_T(D_s^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 \bar{\Lambda}_c^- X \right)}{dp_T( C )}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$, $2<y(\bar{\Lambda}_c^-)<4$, $3<p_T(\bar{\Lambda}_c^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^+ D- X \right)}{dp_T( D )}$ for $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^+ D_s- X \right)}{dp_T( D )}$ for $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$, $2<y(D_s^-)<4$, $3<p_T(D_s^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^+ \bar{\Lambda}_c^- X \right)}{dp_T( C )}$ for $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$, $2<y(\bar{\Lambda}_c^-)<4$, $3<p_T(\bar{\Lambda}_c^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow J/\psi D^0 X \right)}{d \left| \Delta \phi/\pi \right|}$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow J/\psi D^+ X \right)}{d \left| \Delta \phi/\pi \right|}$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow J/\psi D_s^+ X \right)}{d \left| \Delta \phi/\pi \right|}$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(D_s^+)<4$, $3<p_T(D_s^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow J/\psi D^0 X \right)}{d \Delta y }$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow J/\psi D^+ X \right)}{d \Delta y }$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow J/\psi D_s^+ X \right)}{d \Delta y}$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(D_s^+)<4$, $3<p_T(D_s^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D^0 X \right)}{d \left| \Delta \phi/\pi \right|}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D^+ X \right)}{d \left| \Delta \phi/\pi \right|}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$, $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D^0 X \right)}{d \left| \Delta y \right|}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12~GeV/c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D^+ X \right)}{d \left| \Delta y \right|}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$, $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 \bar{D}^0 X \right)}{d \left| \Delta \phi/\pi \right|}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D^- X \right)}{d \left| \Delta \phi/\pi \right|}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ , $2<y(D^-)<4$, $3<p_T(D^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D_s^- X \right)}{d \left| \Delta \phi/\pi \right|}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ , $2<y(D_s^-)<4$, $3<p_T(D_s^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^+ D^- X \right)}{d \left| \Delta \phi/\pi \right|}$ for $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^+ D_s^- X \right)}{d \left| \Delta \phi/\pi \right|}$ for $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$, $2<y(D_s^-)<4$, $3<p_T(D_s^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 \bar{D}^0 X \right)}{d \left| \Delta y \right|}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12~GeV/c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D^- X \right)}{d \left| \Delta y \right|}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ , $2<y(D^-)<4$, $3<p_T(D^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D_s^- X \right)}{d \left| \Delta y \right|}$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$, $2<y(D_s^-)<4$, $3<p_T(D_s^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^+ D^- X \right)}{d \left| \Delta y \right|}$ for $2<y(D^-)<4$, $3<p_T(D^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^+ D_s^- X \right)}{d \left| \Delta y \right|}$ for $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$, $2<y(D_s^-)<4$, $3<p_T(D_s^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow J/\psi D^0 X \right)}{d m_{J/\psi D^0} }$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow J/\psi D^+ X \right)}{d m_{J/\psi D^+} }$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow J/\psi D_s^+ X \right)}{d m_{J/\psi D_s^+} }$ for $2<y(J/\psi)<4$, $p_T(J/\psi)<12$ GeV/$c$, $2<y(D_s^+)<4$, $3<p_T(D_s^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D^0 X \right)}{d m_{D^0 D^0} }$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D^+ X \right)}{d m_{D^0 D^+} }$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$, $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 \bar{D}^0 X \right)}{d m_{D^0 \bar{D}^0} }$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D^- X \right)}{d m_{D^0 D^-} }$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$, $2<y(D^-)<4$, $3<p_T(D^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 D_s^- X \right)}{d m_{D^0 D_s^-} }$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$, $2<y(D_s^-)<4$, $3<p_T(D_s^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^0 \bar{\Lambda}_c^- X \right)}{d m_{D^0 D_s^-} }$ for $2<y(D^0)<4$, $3<p_T(D^0)<12$ GeV/$c$, $2<y(\bar{\Lambda}_c^-)<4$, $3<p_T(\bar{\Lambda}_c^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^+ D^- X \right)}{d m_{D^+ D^-} }$ for $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^+ D_s^- X \right)}{d m_{D^+ D_s^-} }$ for $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$, $2<y(D_s^-)<4$, $3<p_T(D_s^-)<12$ GeV/$c$ region.

Normalized differential cross-section $\frac{d\ln\sigma\left(pp\rightarrow D^+ \bar{\Lambda}_c^- X \right)}{d m_{D^+ \bar{\Lambda}_c^-} }$ for $2<y(D^+)<4$, $3<p_T(D^+)<12$ GeV/$c$, $2<y(\bar{\Lambda}_c^-)<4$, $3<p_T(\bar{\Lambda}_c^-)<12$ GeV/$c$ region.