Search for CP violation in D0 and D+ decays.

The FOCUS collaboration Link, J.M. ; Paolone, V.S. ; Reyes, M. ; et al.
Phys.Lett.B 491 (2000) 232-239, 2000.
Inspire Record 527840 DOI 10.17182/hepdata.42984

A high statistics sample of photoproduced charm particles from the FOCUS (E831) experiment at Fermilab has been used to search for CP violation in the Cabibbo suppressed decay modes D+ to K-K+pi+, D0 to K-K+ and D0 to pi-pi+. We have measured the following CP asymmetry parameters: A_CP(K-K+pi+) = +0.006 +/- 0.011 +/- 0.005, A_CP(K-K+) = -0.001 +/- 0.022 +/- 0.015 and A_CP(pi-pi+) = +0.048 +/- 0.039 +/- 0.025 where the first error is statistical and the second error is systematic. These asymmetries are consistent with zero with smaller errors than previous measurements.

3 data tables

All N-values corrected by efficiencies obtained from Monte-Carlo simulations. The CP asymmetry can be written as: ACP=(eta(D)-eta(DBAR))/(eta(D)+eta(DBAR)), where eta(Q=D+ KK)=(N(Q=D+ KK)/N(Q=D+ K) - N(Q=D- KK)/N(Q=D- K))/(N(Q=D+ KK)/N(Q=D+ K) + N(Q=D- KK)/N(Q=D- K)).

All N-values corrected by efficiencies obtained from Monte-Carlo simulations. The CP asymmetry can be written as: ACP=(eta(D)-eta(DBAR))/(eta(D)+eta(DBAR)), where eta(Q=D0 KK)=(N(Q=D0 KK)/N(Q=D0 K) - N(Q=DBAR0 KK)/N(Q=DBAR0 K))/(N(Q=D0 KK)/N(Q=D0 K) + N(Q=DBAR0 KK)/N(Q=DBAR0 K)).

All N-values corrected by efficiencies obtained from Monte-Carlo simulations. The CP asymmetry can be written as: ACP=(eta(D)-eta(DBAR))/(eta(D)+eta(DBAR)), where eta(Q=D0 PIPI)=(N(Q=D0 PIPI) - N(Q=DBAR0 PIPI))/(N(Q=D0 PIPI) + N(Q=DBAR0 PIPI)).


Charged particle productions at 90 degrees in the center-of-mass in very high energy proton proton collisions

Banner, M. ; Hamel, J.L. ; Pansart, J.P. ; et al.
Phys.Lett.B 41 (1972) 547-551, 1972.
Inspire Record 85071 DOI 10.17182/hepdata.28219

The transverse momentum distribution at 90° of pions, protons and antiprotons have been measured at the CERN intersecting storage rings for C.M. energies between 23.2 and 52.7 GeV. In this energy range, the pion and proton distributions are almost energy independent. The antiproton production rises by a factor of two between 23.2 and 52.7 GeV.

3 data tables

The invariant cross section was fitted by CONST*EXP(-SLOPE*PT).

The invariant cross section was fitted by CONST*EXP(-SLOPE(C=1)*PT+SLOPE(C=2)*PT**2).

No description provided.


Subthrehold K+ production in deuteron and alpha induced nuclear reactions.

Debowsky, M. ; Senger, P. ; Boivin, M. ; et al.
NUCL-EX-9709002, 1997.
Inspire Record 448262 DOI 10.17182/hepdata.31401

Double differential cross sections have been measured for pi+ and K+ emitted around midraidity in d+A and He+A collisions at a beam kinetic energy of 1.15 GeV/nucleon. The total pi+ yield increases by a factor of about 2 when using an alpha projectile instead of a deuteron whereas the K+ yield increases by a factor of about 4. According to transport calculations, the K+ enhancement depends both on the number of hadron-hadron collisions and on the energy available in those collisions: their center-of-mass energy increases with increasing number of projectile nucleons.

2 data tables

The spectra are fitted by the equation d3(sig)/d3(p) = CONST*exp(-Ekin/SLOPE), where Ekin is PI+ kinectic energy in the nucleon-nucleon center of mass frame.

The spectra are fitted by the equation d3(sig)/d3(p) = CONST*exp(-Ekin/SLOPE), where Ekin is K+ kinectic energy in the nucleon-nucleon center of mass frame.


Production of Multi - Pion Systems With Large Longitudinal Momentum at the {CERN} {ISR}

Lockman, William S. ; Meyer, T. ; Rander, J. ; et al.
Phys.Rev.Lett. 41 (1978) 680-683, 1978.
Inspire Record 6695 DOI 10.17182/hepdata.20814

Inclusive cross sections are presented for 2π and 3π systems with large longitudinal x at the highest intersecting storage ring energies (s=53 GeV for 2π; s=53 and 62 GeV for 3π). The ratio π+π−π−π− rises sharply with increasing x similar to the ratio K+K−, as expected in a quark-model interpretation.

2 data tables

The differential cross section is fitted by the equation : E*D3(SIG)/D3(P) = CONST*(1-XL)**POWER*EXP(-SLOPE*PT**2).

The differential cross section is fitted by the equation : E*D3(SIG)/D3(P) = CONST*(1-XL)**POWER*EXP(-SLOPE*PT**2).


Scaling properties of high mass symmetric hadron and pion pair production in proton - beryllium collisions

Jostlein, H. ; Engelmann, Roderich J. ; Fisk, R.J. ; et al.
Phys.Rev.Lett. 42 (1979) 146, 1979.
Inspire Record 132764 DOI 10.17182/hepdata.42603

We present measurements of the production symmetric high-mass hadron and pion pairs by protons of 200, 300, and 400 GeV, incident on a beryllium target. The two-particle invariant cross section for pion production can be described by the function E1E2d6σdp13dp23=(1.7×10−28)pt−8.4(1−xt)14 cm2/GeV4 (where pt is the mean pt of the two hadrons). Functions of the same form have been used in describing single-pion inclusive production. Equality of the exponents of pt in the two processes is observed, confirming the role of smearing contributions to single-hadron cross sections.

2 data tables

E*D3(SIG)/D3(P) is fitted by CONST*(1-XT)**POWER*PT**POWER.

E1*E2*D6(SIG)/D3(P1)/D3(P2) is fitted by CONST*(1-XT)**POWER*PT**POWER, where PT is (pt1 + pt2)/2.


MEASUREMENT OF P P ---> P X BETWEEN 50-GEV/C AND 400-GEV/C.

Abe, K. ; De Lillo, T. ; Robinson, B. ; et al.
Phys.Rev.Lett. 31 (1973) 1527-1530, 1973.
Inspire Record 81796 DOI 10.17182/hepdata.50301

We present measurements of the invariant cross section for the inclusive reaction p+p→p+X in the region 0.14<|t|<0.38 GeV2, 100<s<750 GeV2, and 0.80<x<0.93.

1 data table

The cross sections are fitted by the formula CONST(C=A)*EXP(SLOPE*T)*(1+CO NST(C=B)/SQRT(S)).


Determination of Triple Regge Couplings from a Study of the Reaction p p -> p X between 50-GeV and 400-GeV

Abe, K. ; De Lillo, T. ; Robinson, B. ; et al.
Phys.Rev.Lett. 31 (1973) 1530, 1973.
Inspire Record 82045 DOI 10.17182/hepdata.21356

We present an analysis, in the framework of the triple Regge model, of our recent experimental results on the reaction p+p→p+X between 50 and 400 GeV.

2 data tables

The cross sections is fitted in the framework of the triple Regge model. The symbols P and R in the (C=...) denote pomeron and reggeon, respectively. For fit I and II the authors used conventional trajectories alpha(P) = 1 +0.25*T, alpha(R) = 0.5 + T. Fit II is restricted to data with (1 - M(P=4)**2/S) > 0.84. In fit III they use alpha(R) = 0.2 + T for the RRP term. Fit IV is like fit I with additional fixed (pion pion P) term.

The cross sections is fitted in the farmework of the triple Regge model. The symbols P and R in teh (C=...) denote pomeron and reggeon, respectively. CONST(C=C) and SLOPE are from the replacement of the RRP term by the exponential one : CONST(C=C)*(SLOPE*(1-x)). See text for detail.


The Missing Mass Squared Dependence of the Average Charged Particle Multiplicity in the Reaction K+ p --> K0 X++ from 5-GeV/c-16-GeV/c

Chliapnikov, P.V. ; Gerdyukov, L.N. ; Minaev, N.G. ; et al.
Phys.Lett.B 52 (1974) 375-380, 1974.
Inspire Record 90218 DOI 10.17182/hepdata.50028

The average charged particle multiplicity, 〈 n ch ( M X 2 )〉, in the reaction K + p→K o X ++ is studied as a function of the mass squared, M X 2 , of the recoil system X and also as a function of the K o transverse momentum, p T , at incident momenta of 5.0, 8.2 and 16.0 GeV/ c . The complete data samples yield distributions which are not independent of c.m. energy squared, s , They exhibit a linear dependence on log ( M X 2 X / M o 2 )[ M o 2 =1 GeV 2 ] with a change in slope occurring for M X 2 ≈ s /2, and do not agree with the corresponding distributions of 〈 n ch 〉 as a function of s for K + p inelastic scattering. Sub-samples of the data for which K o production via beam fragmentation, central production and target fragmentation are expected to be the dominant mechanisms show that, within error, the distribution of 〈 n ch ( M X 2 )〉 versus M X 2 is independent of incident momentum for each sub-sample separately. In particular in the beam fragmentation region the 〈 n ch ( M X 2 )〉 versus M X 2 distribution agrees rather well with that of 〈 n ch 〉 versus s for inelastic K + p interactions. The latter result agrees with recent results on the reactions pp → pX and π − p → pX in the NAL energy range. Evidence is presented for the presence of different production mechanisms in these separate regions.

1 data table

Two parametrizations are used for fitting of the mean multiplicity of the charged particles : MULT = CONST(C=A) + CONST(C=B)*LOG(M(P=4 5)**2/GEV**2) and MULT = CONST(C=ALPHA)**(M(P=4 5)**2/GEV**2)**POWER.


Production of chi charmonium via 300-GeV/c pion and proton interactions on a lithium target

The E705 collaboration Antoniazzi, L. ; Arenton, M. ; Cao, Z. ; et al.
Phys.Rev.D 49 (1994) 543-546, 1994.
Inspire Record 354743 DOI 10.17182/hepdata.42541

We present a measurement and comparison of the χc1 and χc2 production cross sections determined from interactions of 300-GeV/c π± and p with a Li target. We find χc1χc2 production ratios of 0.52−0.27+0.57 and 0.08−0.15+0.25 from reactions induced by π± and p, respectively.

3 data tables

The cross section per nucleon.

The cross section per nucleon. The differential cross section is fitted by the equation : D(SIG)/D(PT**2)= CONST*EXP(SLOPE*PT), D(SIG)/D(XL) = CONST*(1-(XL-CONST(C=X0))**2)**POWER(C=1) , and D(SIG)/D(XL) = CONST*(1-ABS(XL-CONST(C=XC)))**POWER(C=2).

The cross section per nucleon. The differential cross section is fitted by the equation : D(SIG)/D(COS(THETA)) = CONST*(1+CONST*COS(THETA)**2), where THETA is the angle between the MU+ and beam momentum in the CHI/C rest frame.


Measurement of the Single Jet Invariant Cross-section at {Fermilab}

The E609 collaboration Cormell, L.R. ; Arenton, M.W. ; Chen, H.F. ; et al.
Phys.Lett.B 150 (1985) 322-326, 1985.
Inspire Record 206286 DOI 10.17182/hepdata.30447

In an experiment performed at Fermilab we have studied the production of high p t hadron jets from 400 GeV/ c pp interactions. A large solid-angle, towered calorimeter was used to trigger and reconstruct the jet events. We report results for inclusive single-jet production and compare those results with QCD predictions and results obtained at the ISR and the SPS Collider.

1 data table

The invariant distribution is fitted to CONST*(1/PT**POWER)*(1-XT)**POWER.