The timing distribution of the background sources predicted to contribute to the signal region, compared to those for a representative signal model. The time is defined by the jet in the event with the largest $t_{\mathrm{jet}}$ passing the relevant selection. The distributions for the major backgrounds are taken from control regions and normalized to the predictions. The observed data is shown by the black points. No events are observed in data for $t_{\mathrm{jet}} > 3\,$ns (indicated with a vertical black line).

The product of the acceptance and efficiency in the $c\tau_{0}$ vs. $m_{\tilde{g}}$ plane for the GMSB model, after all requirements.

The product of the acceptance and efficiency in the $c\tau_{0}$ vs. $m_{\tilde{g}}$ plane for the GMSB model, after all requirements.

The observed upper limits at $95\%$ CL for the gluino pair production cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed.

The observed upper limits at $95\%$ CL for the gluino pair production cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The observed upper limits at $95\%$ CL for the gluino pair production cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed.

The observed upper limits at $95\%$ CL for the gluino pair production cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The observed and expected upper limits at $95\%$ CL on the gluino pair production cross section for a gluino GMSB model with $m_{\tilde{g}}=2400$ GeV. The one (two) standard deviation variation in the expected limit is shown in the inner green (outer yellow) band. The blue solid line shows the observed limit obtained by the CMS displaced jet search

The observed and expected upper limits at $95\%$ CL on the gluino pair production cross section for a gluino GMSB model with $m_{\tilde{g}}=2400$ GeV. The one (two) standard deviation variation in the expected limit is shown in the inner green (outer yellow) band. The blue solid line shows the observed limit obtained by the CMS displaced jet search

The distribution (normalized to unity) of number of ECAL cells hit in the jet for jets in a background enriched data sample (satisfying $|\eta| < 1.48$, $PV_{\rm track}^{\rm fraction} > 1/12$, $\mathrm{HEF} > 0.2$, $t_{\mathrm{jet}} < -3\,\mathrm{ns}$ and $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}} < 0.8$) and for signal jets satisfying signal region requirements (except those on $E_{\mathrm{ECAL}}$ and $N^{\mathrm{cell}}_{\mathrm{ECAL}}$).

The distribution (normalized to unity) of number of ECAL cells hit in the jet for jets in a background enriched data sample (satisfying $|\eta| < 1.48$, $p_\mathrm{T}tf > 0.08$, $\mathrm{HEF} > 0.2$, $t_{\mathrm{jet}} < -3\,\mathrm{ns}$ and $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}} < 0.8$) and for signal jets satisfying signal region requirements (except those on $E_{\mathrm{ECAL}}$ and $N^{\mathrm{cell}}_{\mathrm{ECAL}}$).

The distribution (normalized to unity) of $\mathrm{HEF}$ for a data sample enriched in beam halo and noise jets (satisfying $|\eta| < 1.48$, $p_\mathrm{T} > 30 \,\mathrm{GeV}$, $PV_{\rm track}^{\rm fraction} < 1/12$, $t_{\mathrm{jet}} < -3\,\mathrm{ns}$, $E_{\mathrm{ECAL}} > 20\,\mathrm{GeV}$ and $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}} < 0.4$) and for signal jets passing signal region selections (except on $\mathrm{HEF}$).

The distribution (normalized to unity) of $\mathrm{HEF}$ for a data sample enriched in beam halo and noise jets (satisfying $|\eta| < 1.48$, $p_\mathrm{T} > 30 \,\mathrm{GeV}$, $p_\mathrm{T}tf < 0.08$, $t_{\mathrm{jet}} < -3\,\mathrm{ns}$, $E_{\mathrm{ECAL}} > 20\,\mathrm{GeV}$ and $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}} < 0.4$) and for signal jets passing signal region selections (except on $\mathrm{HEF}$).

The distribution (normalized to unity) of $E_{\mathrm{HCAL}}$ for a data sample enriched in beam halo and noise jets (satisfying $|\eta| < 1.48$, $p_\mathrm{T} > 30 \,\mathrm{GeV}$, $PV_{\rm track}^{\rm fraction} < 1/12$, $t_{\mathrm{jet}} < -3\,\mathrm{ns}$, $E_{\mathrm{ECAL}} > 20\,\mathrm{GeV}$ and $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}} < 0.4$) and for signal jets passing signal region selections (except on $E_{\mathrm{HCAL}}$).

The distribution (normalized to unity) of $E_{\mathrm{HCAL}}$ for a data sample enriched in beam halo and noise jets (satisfying $|\eta| < 1.48$, $p_\mathrm{T} > 30 \,\mathrm{GeV}$, $p_\mathrm{T}tf < 0.08$, $t_{\mathrm{jet}} < -3\,\mathrm{ns}$, $E_{\mathrm{ECAL}} > 20\,\mathrm{GeV}$ and $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}} < 0.4$) and for signal jets passing signal region selections (except on $E_{\mathrm{HCAL}}$).

The distribution (normalized to unity) of $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}}$ for data sample enriched in jets from noise (satisfying $|\eta| < 1.48$, $p_\mathrm{T} > 30\,\mathrm{GeV}$, $PV_{\rm track}^{\rm fraction} > 1/12$, $\mathrm{HEF} > 0.2$, $t_{\mathrm{jet}} < -3\,\mathrm{ns}$, $E_{\mathrm{ECAL}} > 20 \,\mathrm{GeV}$ and $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}} < 0.8$) and for signal jets passing signal region selections (except on $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}}$ and $t^{\mathrm{RMS}}_\mathrm{jet}$)

The distribution (normalized to unity) of $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}}$ for data sample enriched in jets from noise (satisfying $|\eta| < 1.48$, $p_\mathrm{T} > 30\,\mathrm{GeV}$, $p_\mathrm{T}tf > 0.08$, $\mathrm{HEF} > 0.2$, $t_{\mathrm{jet}} < -3\,\mathrm{ns}$, $E_{\mathrm{ECAL}} > 20 \,\mathrm{GeV}$ and $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}} < 0.8$) and for signal jets passing signal region selections (except on $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}}$ and $t^{\mathrm{RMS}}_\mathrm{jet}$)

The distribution (normalized to unity) of $t^{\mathrm{RMS}}_\mathrm{jet}$ for data sample enriched in jets from noise (satisfying $|\eta| < 1.48$, $p_\mathrm{T} > 30\,\mathrm{GeV}$, $PV_{\rm track}^{\rm fraction} > 1/12$, $\mathrm{HEF} > 0.2$, $t_{\mathrm{jet}} < -3\,\mathrm{ns}$, $E_{\mathrm{ECAL}} > 20 \,\mathrm{GeV}$ and $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}} < 0.8$) and for signal jets passing signal region selections (except on $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}}$ and $t^{\mathrm{RMS}}_\mathrm{jet}$)

The distribution (normalized to unity) of $t^{\mathrm{RMS}}_\mathrm{jet}$ for data sample enriched in jets from noise (satisfying $|\eta| < 1.48$, $p_\mathrm{T} > 30\,\mathrm{GeV}$, $p_\mathrm{T}tf > 0.08$, $\mathrm{HEF} > 0.2$, $t_{\mathrm{jet}} < -3\,\mathrm{ns}$, $E_{\mathrm{ECAL}} > 20 \,\mathrm{GeV}$ and $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}} < 0.8$) and for signal jets passing signal region selections (except on $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}}$ and $t^{\mathrm{RMS}}_\mathrm{jet}$)

The distribution (normalized to unity) of $PV_{\rm track}^{\rm fraction}$ for a data sample enriched in main bunch backgrounds (satisfying $p_\mathrm{T} > 30\,\mathrm{GeV}$, $|\eta| < 1.48$, $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}} < 0.8$, $|t_{\mathrm{jet}}| < 3\,\mathrm{ns}$ and $E_{\mathrm{ECAL}} >20\,\mathrm{GeV}$) and for signal jets passing signal selections (except on $PV_{\rm track}^{\rm fraction}$).

The distribution (normalized to unity) of $p_\mathrm{T}tf$ for a data sample enriched in main bunch backgrounds (satisfying $p_\mathrm{T} > 30\,\mathrm{GeV}$, $|\eta| < 1.48$, $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}} < 0.8$, $|t_{\mathrm{jet}}| < 3\,\mathrm{ns}$ and $E_{\mathrm{ECAL}} >20\,\mathrm{GeV}$) and for signal jets passing signal selections (except on $p_\mathrm{T}tf$).

The distribution (normalized to unity) of $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}}$ for a data sample enriched in beam halo (satisfying $p_\mathrm{T} > 30\,\mathrm{GeV}$, $|\eta| < 1.48$, $PV_{\rm track}^{\rm fraction} < 1/12$, $\mathrm{HEF} < 0.2$, $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}} < 0.4$, $t_{\mathrm{jet}} < -3\,\mathrm{ns}$ and $E_{\mathrm{ECAL}} > 20\,\mathrm{GeV}$) and for signal jets passing signal selections (except on $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}}$)

The distribution (normalized to unity) of $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}}$ for a data sample enriched in beam halo (satisfying $p_\mathrm{T} > 30\,\mathrm{GeV}$, $|\eta| < 1.48$, $p_\mathrm{T}tf < 0.08$, $\mathrm{HEF} < 0.2$, $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}} < 0.4$, $t_{\mathrm{jet}} < -3\,\mathrm{ns}$ and $E_{\mathrm{ECAL}} > 20\,\mathrm{GeV}$) and for signal jets passing signal selections (except on $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}}$)

The distribution (normalized to unity) of $\mathrm{max}(\Delta \phi_{\mathrm{DT}})$ for a data sample enriched in cosmic muons (satisfying $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}} < 0.8$, $p_\mathrm{T} > 30\,\mathrm{GeV}$, $|\eta| < 1.48$, $PV_{\rm track}^{\rm fraction} < 1/12$, $\mathrm{HEF} > 0.2$, $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}} < 0.4$, $t_{\mathrm{jet}} > 3\,\mathrm{ns}$, $E_{\mathrm{ECAL}} > 20\,\mathrm{GeV}$ and failing the HCAL noise rejection quality filters) and for signal jets passing signal selections (except on $\mathrm{max}(\Delta \phi_{\mathrm{DT}})$).

The distribution (normalized to unity) of $\mathrm{max}(\Delta \phi_{\mathrm{DT}})$ for a data sample enriched in cosmic muons (satisfying $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}} < 0.8$, $p_\mathrm{T} > 30\,\mathrm{GeV}$, $|\eta| < 1.48$, $p_\mathrm{T}tf < 0.08$, $\mathrm{HEF} > 0.2$, $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}} < 0.4$, $t_{\mathrm{jet}} > 3\,\mathrm{ns}$, $E_{\mathrm{ECAL}} > 20\,\mathrm{GeV}$ and failing the HCAL noise rejection quality filters) and for signal jets passing signal selections (except on $\mathrm{max}(\Delta \phi_{\mathrm{DT}})$).

The distribution (normalized to unity) of $\mathrm{max}(\Delta \phi_{\mathrm{RPC}})$ for a data sample enriched in cosmic muons (satisfying $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}} < 0.8$, $p_\mathrm{T} > 30\,\mathrm{GeV}$, $|\eta| < 1.48$, $PV_{\rm track}^{\rm fraction} < 1/12$, $\mathrm{HEF} > 0.2$, $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}} < 0.4$, $t_{\mathrm{jet}} > 3\,\mathrm{ns}$, $E_{\mathrm{ECAL}} > 20\,\mathrm{GeV}$ and failing the HCAL noise rejection quality filters) and for signal jets passing signal selections (except on $\mathrm{max}(\Delta \phi_{\mathrm{RPC}})$).

The distribution (normalized to unity) of $\mathrm{max}(\Delta \phi_{\mathrm{RPC}})$ for a data sample enriched in cosmic muons (satisfying $E^{\mathrm{CSC}}_\mathrm{ECAL}/E_{\mathrm{ECAL}} < 0.8$, $p_\mathrm{T} > 30\,\mathrm{GeV}$, $|\eta| < 1.48$, $p_\mathrm{T}tf < 0.08$, $\mathrm{HEF} > 0.2$, $t^{\mathrm{RMS}}_\mathrm{jet}/t_{\mathrm{jet}} < 0.4$, $t_{\mathrm{jet}} > 3\,\mathrm{ns}$, $E_{\mathrm{ECAL}} > 20\,\mathrm{GeV}$ and failing the HCAL noise rejection quality filters) and for signal jets passing signal selections (except on $\mathrm{max}(\Delta \phi_{\mathrm{RPC}})$).

Distribution of $t_{\mathrm{jet}}$ for jets with the full Run 2 dataset with no cleaning selection applied (a) and after all jet cleaning selections are applied (b) in events satisfying the trigger requirements and satisfying $p_T^\mathrm{miss} > 300$. The jets are required to pass an inverted selection of $PV_{\rm track}^{\rm fraction} > 1/12$ to enrich the sample in those originating from main and satellite bunch backgrounds. The cleaning selections are shown to reduce the backgrounds by many orders of magnitude.

Distribution of $t_{\mathrm{jet}}$ for jets with the full Run 2 dataset with no cleaning selection applied (a) and after all jet cleaning selections are applied (b) in events satisfying the trigger requirements and satisfying $p_T^\mathrm{miss} > 300$. The jets are required to pass an inverted selection of $PV_{\rm track}^{\rm fraction} > 0.08$ to enrich the sample in those originating from main and satellite bunch backgrounds. The cleaning selections are shown to reduce the backgrounds by many orders of magnitude.

Distribution of $t_{\mathrm{jet}}$ for jets with the full Run 2 dataset in events satisfying the trigger requirements and satisfying $p_T^\mathrm{miss} < 300$. The jets are required to pass an inverted selection of $PV_{\rm track}^{\rm fraction} > 1/12$ to enrich the sample in those originating from main and satellite bunch backgrounds (all other jet cleaning selections are applied). Clear contributions from jets from satellite bunch collisions can be seen peaked around -5, 5 and 10 ns.

Distribution of $t_{\mathrm{jet}}$ for jets with the full Run 2 dataset in events satisfying the trigger requirements and satisfying $p_T^\mathrm{miss} < 300$. The jets are required to pass an inverted selection of $PV_{\rm track}^{\rm fraction} > 0.08$ to enrich the sample in those originating from main and satellite bunch backgrounds (all other jet cleaning selections are applied). Clear contributions from jets from satellite bunch collisions can be seen peaked around -5, 5 and 10 ns.

Contribution to the delayed time of jets from the $\beta$ of the gluino is plotted against the delay contribution from the difference (assuming straight line paths) between the path taken by the gluino and the particle forming the jet from the path length for a particle travelling directly to the same position on the ECAL barrel for gluino $c\tau_{0} = 10$ m and mass of 1000 Gev (top) and 3000 GeV (bottom). The dominant contribution is shown to be the gluino $\beta$.

Contribution to the delayed time of jets from the $\beta$ of the gluino is plotted against the delay contribution from the difference (assuming straight line paths) between the path taken by the gluino and the particle forming the jet from the path length for a particle travelling directly to the same position on the ECAL barrel for gluino $c\tau_{0} = 10$ m and mass of 1000 Gev (top) and 3000 GeV (bottom). The dominant contribution is shown to be the gluino $\beta$.

Selection efficiencies for the GMSB model with $m_{\tilde{g}}=1000$ and various proper decay lengths

Selection efficiencies for the GMSB model with $m_{\tilde{g}}=1000$ and various proper decay lengths

Selection efficiencies for the GMSB model with $m_{\tilde{g}}=2400$ and various proper decay lengths

Selection efficiencies for the GMSB model with $m_{\tilde{g}}=2400$ and various proper decay lengths

Selection efficiencies for the GMSB model with $m_{\tilde{g}}=3000$ and various proper decay lengths

Selection efficiencies for the GMSB model with $m_{\tilde{g}}=3000$ and various proper decay lengths

The observed upper limits at $95\%$ CL for the gluino pair production cross section relative to the theoretical cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The observed upper limits at $95\%$ CL for the gluino pair production cross section relative to the theoretical cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The expected upper limits at $95\%$ CL for the gluino pair production cross section relative to the theoretical cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The expected upper limits at $95\%$ CL for the gluino pair production cross section relative to the theoretical cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The expected plus 1 $\sigma_{\mathrm{experiment}}$ upper limits at $95\%$ CL for the gluino pair production cross section relative to the theoretical cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The expected plus 1 $\sigma_{\mathrm{experiment}}$ upper limits at $95\%$ CL for the gluino pair production cross section relative to the theoretical cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The expected minus 1 $\sigma_{\mathrm{experiment}}$ upper limits at $95\%$ CL for the gluino pair production cross section relative to the theoretical cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The expected minus 1 $\sigma_{\mathrm{experiment}}$ upper limits at $95\%$ CL for the gluino pair production cross section relative to the theoretical cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The expected upper limits at $95\%$ CL for the gluino pair production cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The expected upper limits at $95\%$ CL for the gluino pair production cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The expected plus 1 $\sigma_{\mathrm{experiment}}$ upper limits at $95\%$ CL for the gluino pair production cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The expected plus 1 $\sigma_{\mathrm{experiment}}$ upper limits at $95\%$ CL for the gluino pair production cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The expected minus 1 $\sigma_{\mathrm{experiment}}$ upper limits at $95\%$ CL for the gluino pair production cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

The expected minus 1 $\sigma_{\mathrm{experiment}}$ upper limits at $95\%$ CL for the gluino pair production cross section in the GMSB model, shown in the plane of $m_{\tilde{g}}$ and $c\tau_{0}$. A branching fraction of $100\%$ for the gluino decay to a gluon and a gravitino is assumed. The area below the thick black curve represents the observed exclusion region, while the dashed red lines indicate the expected limits and their $\pm 1$ standard deviation ranges from experimental uncertainties. The thin black lines show the effect of the theoretical uncertainties on the signal cross section.

Normalized inclusive 2-jet cross section differential in $\Delta\phi_{1,2}$ for $500 < p_{T}^{max} < 600$ GeV

Normalized inclusive 2-jet cross section differential in $\Delta\phi_{1,2}$ for $600 < p_{T}^{max} < 700$ GeV

Normalized inclusive 2-jet cross section differential in $\Delta\phi_{1,2}$ for $700 < p_{T}^{max} < 800$ GeV

Normalized inclusive 2-jet cross section differential in $\Delta\phi_{1,2}$ for $800 < p_{T}^{max} < 1000$ GeV

Normalized inclusive 2-jet cross section differential in $\Delta\phi_{1,2}$ for $1000 < p_{T}^{max} < 1200$ GeV

Normalized inclusive 2-jet cross section differential in $\Delta\phi_{1,2}$ for $p_{T}^{max} > 1200$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{1,2}$ for $200 < p_{T}^{max} < 300$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{1,2}$ for $300 < p_{T}^{max} < 400$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{1,2}$ for $400 < p_{T}^{max} < 500$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{1,2}$ for $500 < p_{T}^{max} < 600$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{1,2}$ for $600 < p_{T}^{max} < 700$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{1,2}$ for $700 < p_{T}^{max} < 800$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{1,2}$ for $800 < p_{T}^{max} < 1000$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{1,2}$ for $p_{T}^{max} > 1000$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{1,2}$ for $200 < p_{T}^{max} < 300$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{1,2}$ for $300 < p_{T}^{max} < 400$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{1,2}$ for $400 < p_{T}^{max} < 500$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{1,2}$ for $500 < p_{T}^{max} < 600$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{1,2}$ for $600 < p_{T}^{max} < 700$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{1,2}$ for $700 < p_{T}^{max} < 800$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{1,2}$ for $800 < p_{T}^{max} < 1000$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{1,2}$ for $p_{T}^{max} > 1000$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $200 < p_{T}^{max} < 300$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $300 < p_{T}^{max} < 400$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $400 < p_{T}^{max} < 500$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $500 < p_{T}^{max} < 600$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $600 < p_{T}^{max} < 700$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $700 < p_{T}^{max} < 800$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $800 < p_{T}^{max} < 1000$ GeV

Normalized inclusive 3-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $p_{T}^{max} > 1000$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $200 < p_{T}^{max} < 300$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $300 < p_{T}^{max} < 400$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $400 < p_{T}^{max} < 500$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $500 < p_{T}^{max} < 600$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $600 < p_{T}^{max} < 700$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $700 < p_{T}^{max} < 800$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $800 < p_{T}^{max} < 1000$ GeV

Normalized inclusive 4-jet cross section differential in $\Delta\phi_{2j}^{min}$ for $p_{T}^{max} > 1000$ GeV

Differential cross section as function of the jet multiplicity.

Differential cross section as function of the pT of the pT-leading jet. The jet must have pT>30 GeV and must be separated from the charged leptons from the W and Z decays by DeltaR(jet,lepton) > 0.5.

The cross section measurement as a function of the inclusive jet multiplicity, for jet multiplicities of up to 7.

The differential cross section measurement as a function of the transverse momentum of the first leading jet.

The differential cross section measurement as a function of the transverse momentum of the first leading jet.

The differential cross section measurement as a function of the transverse momentum of the second leading jet.

The differential cross section measurement as a function of the transverse momentum of the second leading jet.

The differential cross section measurement as a function of the transverse momentum of the third leading jet.

The differential cross section measurement as a function of the transverse momentum of the third leading jet.

The differential cross section measurement as a function of the transverse momentum of the fourth leading jet.

The differential cross section measurement as a function of the transverse momentum of the fourth leading jet.

The differential cross section measurement as a function of the scalar sum of the transverse momenta of jets (HT) for events with one or more jets.

The differential cross section measurement as a function of the scalar sum of the transverse momenta of jets (HT) for events with one or more jets.

The differential cross section measurement as a function of the scalar sum of the transverse momenta of jets (HT) for events with two or more jets.

The differential cross section measurement as a function of the scalar sum of the transverse momenta of jets (HT) for events with two or more jets.

The differential cross section measurement as a function of the scalar sum of the transverse momenta of jets (HT) for events with three or more jets.

The differential cross section measurement as a function of the scalar sum of the transverse momenta of jets (HT) for events with three or more jets.

The differential cross section measurement as a function of the scalar sum of the transverse momenta of jets (HT) for events with four or more jets.

The differential cross section measurement as a function of the scalar sum of the transverse momenta of jets (HT) for events with four or more jets.

The differential cross section measurement as a function of the transverse momentum of the dijet system of the two highest pT jets for events with two or more jets.

The differential cross section measurement as a function of the transverse momentum of the dijet system of the two highest pT jets for events with two or more jets.

The differential cross section measurement as a function of the transverse momentum of the dijet system of the two highest pT jets for events with three or more jets.

The differential cross section measurement as a function of the transverse momentum of the dijet system of the two highest pT jets for events with three or more jets.

The differential cross section measurement as a function of the transverse momentum of the dijet system of the two highest pT jets for events with four or more jets.

The differential cross section measurement as a function of the transverse momentum of the dijet system of the two highest pT jets for events with four or more jets.

The differential cross section measurement as a function of the dijet invariant mass of the two highest pT jets for events with two or more jets.

The differential cross section measurement as a function of the dijet invariant mass of the two highest pT jets for events with two or more jets.

The differential cross section measurement as a function of the dijet invariant mass of the two highest pT jets for events with three or more jets.

The differential cross section measurement as a function of the dijet invariant mass of the two highest pT jets for events with three or more jets.

The differential cross section measurement as a function of the dijet invariant mass of the two highest pT jets for events with four or more jets.

The differential cross section measurement as a function of the dijet invariant mass of the two highest pT jets for events with four or more jets.

The differential cross section measurement as a function of the absolute value of the pseudorapidity of the first leading jet.

The differential cross section measurement as a function of the absolute value of the pseudorapidity of the first leading jet.

The differential cross section measurement as a function of the absolute value of the pseudorapidity of the second leading jet.

The differential cross section measurement as a function of the absolute value of the pseudorapidity of the second leading jet.

The differential cross section measurement as a function of the absolute value of the pseudorapidity of the third leading jet.

The differential cross section measurement as a function of the absolute value of the pseudorapidity of the third leading jet.

The differential cross section measurement as a function of the absolute value of the pseudorapidity of the fourth leading jet.

The differential cross section measurement as a function of the absolute value of the pseudorapidity of the fourth leading jet.

The differential cross section measurement as a function of the rapidity difference between the two highest pT jets for events with two or more jets.

The differential cross section measurement as a function of the rapidity difference between the two highest pT jets for events with two or more jets.

The differential cross section measurement as a function of the rapidity difference between the two highest pT jets for events with three or more jets.

The differential cross section measurement as a function of the rapidity difference between the two highest pT jets for events with three or more jets.

The differential cross section measurement as a function of the rapidity difference between the two highest pT jets for events with four or more jets.

The differential cross section measurement as a function of the rapidity difference between the two highest pT jets for events with four or more jets.

The differential cross section measurement as a function of the rapidity difference between the first and the third highest pT jets for events with three or more jets.

The differential cross section measurement as a function of the rapidity difference between the first and the third highest pT jets for events with three or more jets.

The differential cross section measurement as a function of the rapidity difference between the second and the third highest pT jets for events with three or more jets.

The differential cross section measurement as a function of the rapidity difference between the second and the third highest pT jets for events with three or more jets.

The differential cross section measurement as a function of the rapidity difference between the most forward and the most backward jets for events with two or more jets.

The differential cross section measurement as a function of the rapidity difference between the most forward and the most backward jets for events with two or more jets.

The differential cross section measurement as a function of the rapidity difference between the most forward and the most backward jets for events with three or more jets.

The differential cross section measurement as a function of the rapidity difference between the most forward and the most backward jets for events with three or more jets.

The differential cross section measurement as a function of the rapidity difference between the most forward and the most backward jets for events with four or more jets.

The differential cross section measurement as a function of the rapidity difference between the most forward and the most backward jets for events with four or more jets.

The differential cross section measurement as a function of the azimuthal angle separation between the two highest pT jets for events with two or more jets.

The differential cross section measurement as a function of the azimuthal angle separation between the two highest pT jets for events with two or more jets.

The differential cross section measurement as a function of the azimuthal angle separation between the most forward and the most backward jets for events with two or more jets.

The differential cross section measurement as a function of the azimuthal angle separation between the most forward and the most backward jets for events with two or more jets.

The differential cross section measurement as a function of DeltaR separation between the two highest pT jets for events with two or more jets.

The differential cross section measurement as a function of DeltaR separation between the two highest pT jets for events with two or more jets.

The differential cross section measurement as a function of the azimuthal angle separation between the first leading jet and the muon.

The differential cross section measurement as a function of the azimuthal angle separation between the first leading jet and the muon.

The differential cross section measurement as a function of the azimuthal angle separation between the second leading jet and the muon.

The differential cross section measurement as a function of the azimuthal angle separation between the second leading jet and the muon.

The differential cross section measurement as a function of the azimuthal angle separation between the third leading jet and the muon.

The differential cross section measurement as a function of the azimuthal angle separation between the third leading jet and the muon.

The differential cross section measurement as a function of the azimuthal angle separation between the fourth leading jet and the muon.

The differential cross section measurement as a function of the azimuthal angle separation between the fourth leading jet and the muon.

Average number of jets as a function of HT for events with one or more jets.

Average number of jets as a function of HT for events with one or more jets.

Average number of jets as a function of HT for events with two or more jets.

Average number of jets as a function of HT for events with two or more jets.

Average number of jets as a function of the rapidity difference between the two highest pT jets for events with two or more jets.

Average number of jets as a function of the rapidity difference between the two highest pT jets for events with two or more jets.

Average number of jets as a function of the rapidity difference between the most forward and the most backward jets for events with two or more jets.

Average number of jets as a function of the rapidity difference between the most forward and the most backward jets for events with two or more jets.

NMSSM 95% CL upper limit on cross section times branching ratio

NMSSM 95% CL upper limit on cross section times branching ratio

NMSSM 95% CL upper limit on cross section times branching ratio

NMSSM 95% CL upper limit on cross section times branching ratio

90% CL upper limit on MSSMD kinetic mixing parameter epsilon

90% CL upper limit on MSSMD kinetic mixing parameter epsilon

90% CL upper limit on MSSMD kinetic mixing parameter epsilon

90% CL upper limit on MSSMD kinetic mixing parameter epsilon

Left pannel. The vertical bars (boxes) represent the statistical (bin-to-bin systematic) uncertainties, while the horizontal bars give the bin widths. The global uncertainty (of 2.3%) is not graphically represented. The blue line represents the average for $p_T > 18$ GeV. For comparison, the LHCb measurement [10.1103/PhysRevLett.124.122002] is also shown. $ 12 < \mathrm{B} \, p_T < 70$ GeV and $ 0 < |y| < 2.4 $. Global uncertanties are not included in the table (2.3%)

Left pannel. The vertical bars (boxes) represent the statistical (bin-to-bin systematic) uncertainties, while the horizontal bars give the bin widths. The global uncertainty (of 2.3%) is not graphically represented. The blue line represents the average for $p_T > 18$ GeV. For comparison, the LHCb measurement [10.1103/PhysRevLett.124.122002] is also shown. $ 12 < \mathrm{B} \, p_T < 70$ GeV and $ 0 < |y| < 2.4 $. Global uncertanties are not included in the table (2.3%)

Left pannel. The vertical bars (boxes) represent the statistical (bin-to-bin systematic) uncertainties, while the horizontal bars give the bin widths. The global uncertainty (of 2.3%) is not graphically represented. The blue line represents the average for $p_T > 18$ GeV. For comparison, the LHCb measurement [10.1103/PhysRevLett.124.122002] is also shown. $ 12 < \mathrm{B} \, p_T < 70$ GeV and $ 0 < |y| < 2.4 $. Global uncertanties are not included in the table (2.3%)

Right pannel. The vertical bars (boxes) represent the statistical (bin-to-bin systematic) uncertainties, while the horizontal bars give the bin widths. The global uncertainty (of 2.3%) is not graphically represented. The blue line represents the average for $p_T > 18$ GeV. For comparison, the LHCb measurement [10.1103/PhysRevLett.124.122002] is also shown. $ 12 < \mathrm{B} \, p_T < 70$ GeV and $ 0 < |y| < 2.4 $. Global uncertanties are not included in the table (2.3%)

Right pannel. The vertical bars (boxes) represent the statistical (bin-to-bin systematic) uncertainties, while the horizontal bars give the bin widths. The global uncertainty (of 2.3%) is not graphically represented. The blue line represents the average for $p_T > 18$ GeV. For comparison, the LHCb measurement [10.1103/PhysRevLett.124.122002] is also shown. $ 12 < \mathrm{B} \, p_T < 70$ GeV and $ 0 < |y| < 2.4 $. Global uncertanties are not included in the table (2.3%)

Right pannel. The vertical bars (boxes) represent the statistical (bin-to-bin systematic) uncertainties, while the horizontal bars give the bin widths. The global uncertainty (of 2.3%) is not graphically represented. The blue line represents the average for $p_T > 18$ GeV. For comparison, the LHCb measurement [10.1103/PhysRevLett.124.122002] is also shown. $ 12 < \mathrm{B} \, p_T < 70$ GeV and $ 0 < |y| < 2.4 $. Global uncertanties are not included in the table (2.3%)

Left panel.The vertical bars (boxes) represent the statistical (bin-to-bin systematic) uncertainties, while the horizontal bars give the bin widths. The global uncertainty (of 4.9\%) is not graphically represented. The blue line represents the average of all the points. $ 12 < \mathrm{B} \, p_T < 70$ GeV and $ 0 < |y| < 2.4 $. Global uncertanties are not included in the table (4.9%)

Left panel.The vertical bars (boxes) represent the statistical (bin-to-bin systematic) uncertainties, while the horizontal bars give the bin widths. The global uncertainty (of 5.7%) is not graphically represented. The blue line represents the average of all the points. $ 12 < \mathrm{B} \, p_T < 70$ GeV and $ 0 < |y| < 2.4 $. Global uncertanties are not included in the table (5.7%)

Left panel.The vertical bars (boxes) represent the statistical (bin-to-bin systematic) uncertainties, while the horizontal bars give the bin widths. The global uncertainty (of 5.7%) is not graphically represented. The blue line represents the average of all the points. $ 12 < \mathrm{B} \, p_T < 70$ GeV and $ 0 < |y| < 2.4 $. Global uncertanties are not included in the table (5.7%)

Right panel.The vertical bars (boxes) represent the statistical (bin-to-bin systematic) uncertainties, while the horizontal bars give the bin widths. The global uncertainty (of 4.9\%) is not graphically represented. The blue line represents the average of all the points. $ 12 < \mathrm{B} \, p_T < 70$ GeV and $ 0 < |y| < 2.4 $. Global uncertanties are not included in the table (4.9%)

Right panel.The vertical bars (boxes) represent the statistical (bin-to-bin systematic) uncertainties, while the horizontal bars give the bin widths. The global uncertainty (of 5.7%) is not graphically represented. The blue line represents the average of all the points. $ 12 < \mathrm{B} \, p_T < 70$ GeV and $ 0 < |y| < 2.4 $. Global uncertanties are not included in the table (5.7%)

Right panel.The vertical bars (boxes) represent the statistical (bin-to-bin systematic) uncertainties, while the horizontal bars give the bin widths. The global uncertainty (of 5.7%) is not graphically represented. The blue line represents the average of all the points. $ 12 < \mathrm{B} \, p_T < 70$ GeV and $ 0 < |y| < 2.4 $. Global uncertanties are not included in the table (5.7%)