No description provided.
No description provided.
No description provided.
None
No description provided.
No description provided.
No description provided.
None
No description provided.
No description provided.
No description provided.
None
No description provided.
No description provided.
No description provided.
None
No description provided.
No description provided.
No description provided.
The excitation of theΔ resonance is observed in proton collisions on C, Nb and Pb targets at 0.8 and 1.6 GeV incident energies. The mass E0 and widthΓ of the resonance are determined from the invariant mass spectra of correlated (p, π±)-pairs in the final state of the collision: The mass E0 is smaller than that of the free resonance, however by comparing to intra-nuclear cascade calculations, this reduction is traced back to the effects of Fermi motion, NN scattering and pion reabsorption in nuclear matter.
WITHIN THE DETECTORS ACCEPTANCE RESULTS.
WITHIN THE DETECTORS ACCEPTANCE RESULTS.
WITHIN THE DETECTORS ACCEPTANCE RESULTS.
Differential and double differential cross sections of positive pion production by 240 MeV protons on carbon and copper nuclei are measured. The energy dependence of differential cross section for copper nucleus at 90 deg angle within the 240-500 MeV energy range of protons and angular dependence of the integrated differential cross section are obtained. It is shown that the differential cross section at 250 MeV is 80 times less than that at 585 MeV
No description provided.
No description provided.
No description provided.
An analysis of inclusive pion production in proton-beryllium collisions at 6.4, 12.3, and 17.5 GeV/c proton beam momentum has been performed. The data were taken by Experiment 910 at the Alternating Gradient Synchrotron at the Brookhaven National Laboratory. The differential $\pi^+$ and $\pi^-$ production cross sections ($d^2\sigma/dpd\Omega$) are measured up to 400 mRad in $\theta_{\pi}$ and up to 6 GeV/c in $p_{\pi}$. The measured cross section is fit with a Sanford-Wang parameterization.
Pion production cross section for 6.4 GeV incident protons.
Pion production cross section for 6.4 GeV incident protons.
Pion production cross section for 6.4 GeV incident protons.
Particle production in proton-induced reactions at 14.6 GeV/c on Be, Al, Cu, and Au targets has been systematically studied using the E-802 spectrometer at the BNL-Alternating Gradient Synchrotron. Particles are measured in the angular range from 5° to 58° and identified up to momenta of 5, 3.5, and 8 GeV/c for pions, kaons, and protons, respectively. Mechanisms for particle production are discussed in comparison with heavy-ion-induced reactions at the same incident energy per nucleon.
No description provided.
No description provided.
No description provided.
Cross sections of cumulative K exp + and K exp - -meson production in the 200-1000 MeV kinetic energy range at 90 deg, 120 deg, 168 deg (l.c.s.) are measured. The ranges of kinetic energies and emission angles mean that, according to the hypothesis of cum ...
.
.
.
None
.
.
.
None
.
.
.
Invariant cross sections for hadron production (π±,K±,p and\(\bar p\)) by protons off C, Al, Cu, Sn and Pb nuclei have been measured at 70 GeV for theP∧ range from 1 up to 4.65 GeV/c. TheA-dependence of the invariant cross section is not described by the exponentialAα(P∧), which points to the presence of secondary hadron absorption in nuclei.
.
.
.
We report on double-differential inclusive cross-sections of the production of secondary protons, deuterons, and charged pions and kaons, in the interactions with a 5% nuclear interaction length thick stationary beryllium target, of a +8.9 GeV/c proton and pion beam, and a -8.0 GeV/c pion beam. Results are given for secondary particles with production angles between 20 and 125 degrees.
Double differential inclusive cross section for the reaction P BE --> P X with an 8.9 GeV beam and production angle 20 to 30 degrees.
Double differential inclusive cross section for the reaction P BE --> P X with an 8.9 GeV beam and production angle 30 to 40 degrees.
Double differential inclusive cross section for the reaction P BE --> P X with an 8.9 GeV beam and production angle 40 to 50 degrees.
Measurements of double-differential charged pion production cross-sections in interactions of 12 GeV/c protons on O_2 and N_2 thin targets are presented in the kinematic range 0.5 GeV/c < p_{\pi} < 8 GeV/c and 50 mrad < \theta_{\pi} < 250 mrad (in the laboratory frame) and are compared with p--C results. For p--N_2 (p--O_2) interactions the analysis is performed using 38576 (7522) reconstructed secondary pions. The analysis uses the beam instrumentation and the forward spectrometer of the HARP experiment at CERN PS. The measured cross-sections have a direct impact on the precise calculation of atmospheric neutrino fluxes and on the improved reliability of extensive air shower simulations by reducing the uncertainties of hadronic interaction models in the low energy range. In particular, the present results allow the common hypothesis that p--C data can be used to predict the p--N_2 and p--O_2 pion production cross-sections to be tested.
Double differential cross section for pion production in P-N2 interactions for the pion scattered polar angle range 50 to 100 mrad.
Double differential cross section for pion production in P-N2 interactions for the pion scattered polar angle range 100 to 150 mrad.
Double differential cross section for pion production in P-N2 interactions for the pion scattered polar angle range 150 to 200 mrad.
The results of the measurements of the double-differential production cross-sections of pions in p-C and $\pi^\pm$-C interactions using the forward spectrometer of the HARP experiment are presented. The incident particles are 12 GeV/c protons and charged pions directed onto a carbon target with a thickness of 5% of a nuclear interaction length. For p-C interactions the analysis is performed using 100035 reconstructed secondary tracks, while the corresponding numbers of tracks for $\pi^-$-C and $\pi^+$-C analyses are 106534 and 10122 respectively. Cross-section results are presented in the kinematic range 0.5 GeV/c $\leq p_{\pi} <$ 8 GeV/c and 30 mrad $\leq \theta_{\pi} <$ 240 mrad in the laboratory frame. The measured cross-sections have a direct impact on the precise calculation of atmospheric neutrino fluxes and on the improved reliability of extensive air shower simulations by reducing the uncertainties of hadronic interaction models in the low energy range.
Double-differential cross section for 12 GeV proton-carbon interactions with the scattered polar angle 30 to 60 mrad.
Double-differential cross section for 12 GeV proton-carbon interactions with the scattered polar angle 60 to 90 mrad.
Double-differential cross section for 12 GeV proton-carbon interactions with the scattered polar angle 90 to 120 mrad.
Measurements of the double-differential charged pion production cross-section in the range of momentum 100 MeV/c < p < 800 MeV/c and angle 0.35 < \theta < 2.15 rad in proton-beryllium, proton-carbon, proton-aluminium, proton-copper, proton-tin, proton-tantalum and proton-lead collisions are presented. The data were taken with the large acceptance HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 GeV/c to 12.9 GeV/c hitting a target with a thickness of 5% of a nuclear interaction length.
Double-differential cross section for inclusive PI+ production in the LAB system with the BE target for a PI+ polar angle from 0.35 to 0.55 radians.
Double-differential cross section for inclusive PI+ production in the LAB system with the BE target for a PI+ polar angle from 0.55 to 0.75 radians.
Double-differential cross section for inclusive PI+ production in the LAB system with the BE target for a PI+ polar angle from 0.75 to 0.95 radians.
A measurement of the double-differential $\pi^{\pm}$ production cross-section in proton--carbon, proton--copper and proton--tin collisions in the range of pion momentum $100 \MeVc \leq p < 800 \MeVc$ and angle $0.35 \rad \le \theta <2.15 \rad$ is presented. The data were taken with the HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 \GeVc to 12 \GeVc hitting a target with a thickness of 5% of a nuclear interaction length. The tracking and identification of the produced particles was done using a small-radius cylindrical time projection chamber (TPC) placed in a solenoidal magnet. An elaborate system of detectors in the beam line ensured the identification of the incident particles. Results are shown for the double-differential cross-sections at four incident proton beam momenta (3 \GeVc, 5 \GeVc, 8 \GeVc and 12 \GeVc).
Double-differential cross section for PI+ production from C in the LAB system for PI+ polar angle from 0.35 to 0.55 radians.
Double-differential cross section for PI+ production from C in the LAB system for PI+ polar angle from 0.55 to 0.75 radians.
Double-differential cross section for PI+ production from C in the LAB system for PI+ polar angle from 0.75 to 0.95 radians.
Measurements of the double-differential $\pi^{\pm}$ production cross-section in the range of momentum $100 \MeVc \leq p < 800 \MeVc$ and angle $0.35 \rad \leq \theta < 2.15 \rad$ in proton--beryllium, proton--aluminium and proton--lead collisions are presented. The data were taken with the HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 \GeVc to 12.9 \GeVc hitting a target with a thickness of 5% of a nuclear interaction length. The tracking and identification of the produced particles was performed using a small-radius cylindrical time projection chamber (TPC) placed inside a solenoidal magnet. Incident particles were identified by an elaborate system of beam detectors. Results are obtained for the double-differential cross-sections at six incident proton beam momenta (3 \GeVc, 5 \GeVc, 8 \GeVc, 8.9 \GeVc (Be only), 12 \GeVc and 12.9 \GeVc (Al only)) and compared to previously available data.
Double-differential cross section for PI+ production from BE in the LAB system for PI+ polar angle from 0.35 to 0.55 radians.
Double-differential cross section for PI+ production from BE in the LAB system for PI+ polar angle from 0.55 to 0.75 radians.
Double-differential cross section for PI+ production from BE in the LAB system for PI+ polar angle from 0.75 to 0.95 radians.
A measurement of the double-differential cross-section for the production of charged pions in proton--tantalum collisions emitted at large angles from the incoming beam direction is presented. The data were taken in 2002 with the HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 \GeVc to 12 \GeVc hitting a tantalum target with a thickness of 5% of a nuclear interaction length. The angular and momentum range covered by the experiment ($100 \MeVc \le p < 800 \MeVc$ and $0.35 \rad \le \theta <2.15 \rad$) is of particular importance for the design of a neutrino factory. The produced particles were detected using a small-radius cylindrical time projection chamber (TPC) placed in a solenoidal magnet. Track recognition, momentum determination and particle identification were all performed based on the measurements made with the TPC. An elaborate system of detectors in the beam line ensured the identification of the incident particles. Results are shown for the double-differential cross-sections ${{\mathrm{d}^2 \sigma}} / {{\mathrm{d}p\mathrm{d}\theta}}$ at four incident proton beam momenta (3 \GeVc, 5 \GeVc, 8 \GeVc and 12 \GeVc). In addition, the pion yields within the acceptance of typical neutrino factory designs are shown as a function of beam momentum. The measurement of these yields within a single experiment eliminates most systematic errors in the comparison between rates at different beam momenta and between positive and negative pion production.
Double-differential cross section for PI+ production in the LAB system for PI+ polar angle from 0.35 to 0.55 radians.
Double-differential cross section for PI+ production in the LAB system for PI+ polar angle from 0.55 to 0.75 radians.
Double-differential cross section for PI+ production in the LAB system for PI+ polar angle from 0.75 to 0.95 radians.
The double-differential production cross-section of positive pions, $d^2\sigma^{\pi^{+}}/dpd\Omega$, measured in the HARP experiment is presented. The incident particles are 8.9 GeV/c protons directed onto a beryllium target with a nominal thickness of 5% of a nuclear interaction length. The measured cross-section has a direct impact on the prediction of neutrino fluxes for the MiniBooNE and SciBooNE experiments at Fermilab. After cuts, 13 million protons on target produced about 96,000 reconstructed secondary tracks which were used in this analysis. Cross-section results are presented in the kinematic range 0.75 GeV/c < $p_{\pi}$ < 6.5 GeV/c and 30 mrad < $\theta_{\pi}$ < 210 mrad in the laboratory frame.
Double differential cross section for PI+ production in the angular range 30 to 60 MRAD. Errors are point-to-point only.
Double differential cross section for PI+ production in the angular range 60 to 90 MRAD. Errors are point-to-point only.
Double differential cross section for PI+ production in the angular range 90 to 120 MRAD. Errors are point-to-point only.
A precision measurement of the double-differential production cross-section, ${{d^2 \sigma^{\pi^+}}}/{{d p d\Omega}}$, for pions of positive charge, performed in the HARP experiment is presented. The incident particles are protons of 12.9 GeV/c momentum impinging on an aluminium target of 5% nuclear interaction length. The measurement of this cross-section has a direct application to the calculation of the neutrino flux of the K2K experiment. After cuts, 210000 secondary tracks reconstructed in the forward spectrometer were used in this analysis. The results are given for secondaries within a momentum range from 0.75 GeV/c to 6.5 GeV/c, and within an angular range from 30 mrad to 210 mrad. The absolute normalization was performed using prescaled beam triggers counting protons on target. The overall scale of the cross-section is known to better than 6%, while the average point-to-point error is 8.2%.
Double differential PI+ production cross section in the angular range 30 to 60 mrad.. Errors shown are point-to-point only.
Double differential PI+ production cross section in the angular range 60 to 90 mrad.. Errors shown are point-to-point only.
Double differential PI+ production cross section in the angular range 90 to 120 mrad.. Errors shown are point-to-point only.
The analyzing powers of π+ and π− were measured using an incident 22−GeV/c transversely polarized proton beam at the Brookhaven Alternating Gradient Synchrotron. A magnetic spectrometer measured π± inclusive asymmetries on a hydrogen and a carbon target. An elastic polarimeter with a CH2 target measured pp elastic-scattering asymmetries to determine the beam polarization using published data for the pp elastic analyzing power. Using the beam polarization determined from the elastic polarimeter and asymmetries from the inclusive spectrometer, analyzing powers AN for π± were determined in the xF and pT ranges (0.45–0.8) and (0.3–1.2 GeV/c), respectively. The analyzing power results are similar in both sign and character to other measurements at 200 and 11.7 GeV/c, confirming the expectation that high-energy pion inclusive analyzing powers remain large and relatively energy independent. This suggests that pion inclusive polarimetry may be a suitable method for measuring future beam polarizations at BNL RHIC or DESY HERA. Analyzing powers of π+ and π− produced on hydrogen and carbon targets are the same. Various models to explain inclusive analyzing powers are also discussed.
Analyzing power measurements for PI+ and PI- production on the carbon target at incident momentum 21.6 GeV. See text of article for definitions of method 'A' and 'B'.
Analyzing power measurements for inclusive PI- production from the hydrogen target.
Analyzing power measurements for inclusive PI+ production from the hydrogen target.
Differential cross-sections are presented for the inclusive production of charged pions in the momentum range 0.1 to 1.2 GeV/c in interactions of 12.3 and 17.5 GeV/c protons with Be, Cu, and Au targets. The measurements were made by Experiment 910 at the Alternating Gradient Synchrotron in Brookhaven National Laboratory. The cross-sections are presented as a function of pion total momentum and production polar angle $\theta$ with respect to the beam.
The pion production cross section of P-AU interactions at 17.5 GeV incidentmomentum.
The pion production cross section of P-AU interactions at 17.5 GeV incidentmomentum.
The pion production cross section of P-AU interactions at 17.5 GeV incidentmomentum.
This paper presents the results on charged particle yields and production ratios as measured by the NA56/SPY experiment for 450 GeV/c proton interactions on beryllium targets. The data cover a seconda
Positive particle yield from the 100mm Be target. Data are corrected for the pion or proton flux coming from strange particle decays.
Negative particle yield from the 100mm Be target. Data are corrected for the pion or antiproton flux coming from strange particle decays.
Positive particle yield from the 100mm Be target. Data are NOT corrected for the pion or proton flux coming from strange particle decays.
Forum