Showing 10 of 6521 results
We report measurements of charmed-hadron ($D^{0}$, $D^{*}$) production cross sections at mid-rapidity in $p$ + $p$ collisions at a center-of-mass energy of 200 GeV by the STAR experiment. Charmed hadrons were reconstructed via the hadronic decays $D^{0}\rightarrow K^{-}\pi^{+}$, $D^{*+}\rightarrow D^{0}\pi^{+}\rightarrow K^{-}\pi^{+}\pi^{+}$ and their charge conjugates, covering the $p_T$ range of 0.6$-$2.0 GeV/$c$ and 2.0$-$6.0 GeV/$c$ for $D^{0}$ and $D^{*+}$, respectively. From this analysis, the charm-pair production cross section at mid-rapidity is $d\sigma/dy|_{y=0}^{c\bar{c}}$ = 170 $\pm$ 45 (stat.) $^{+38}_{-59}$ (sys.) $\mu$b. The extracted charm-pair cross section is compared to perturbative QCD calculations. The transverse momentum differential cross section is found to be consistent with the upper bound of a Fixed-Order Next-to-Leading Logarithm calculation.
Vector mesons may be photoproduced in relativistic heavy-ion collisions when a virtual photon emitted by one nucleus scatters from the other nucleus, emerging as a vector meson. The STAR Collaboration has previously presented measurements of coherent $\rho^0$ photoproduction at center of mass energies of 130 GeV and 200 GeV in AuAu collisions. Here, we present a measurement of the cross section at 62.4 GeV; we find that the cross section for coherent $\rho^0$ photoproduction with nuclear breakup is $10.5\pm1.5\pm 1.6$ mb at 62.4 GeV. The cross-section ratio between 200 GeV and 62.4 GeV is $2.8\pm0.6$, less than is predicted by most theoretical models. It is, however, proportionally much larger than the previously observed $15\pm 55$% increase between 130 GeV and 200 GeV.
Measurements of the production of forward high-energy pi0 mesons from transversely polarized proton collisions at \sqrt{s}=200 GeV are reported. The cross section is generally consistent with next-to-leading order perturbative QCD calculations. The analyzing power is small at x_F below about 0.3, and becomes positive and large at higher x_F, similar to the trend in data at \sqrt{s}<=20 GeV. The analyzing power is in qualitative agreement with perturbative QCD model expectations. This is the first significant spin result seen for particles produced with p_T>1 GeV/c at a polarized proton collider.
We determine rapidity asymmetry in the production of charged pions, protons and anti-protons for large transverse momentum (pT) for d+Au collisions at \sqrt s_NN = 200 GeV. The identified hadrons are measured in the rapidity regions |y| < 0.5 and 0.5 < |y| < 1.0 for the pT range 2.5 < pT < 10 GeV/c. We observe significant rapidity asymmetry for charged pion and proton+anti-proton production in both rapidity regions. The asymmetry is larger for 0.5 < |y| < 1.0 than for |y|< 0.5 and is almost independent of particle type. The measurements are compared to various model predictions employing multiple scattering, energy loss, nuclear shadowing, saturation effects, and recombination, and also to a phenomenological parton model. We find that asymmetries are sensitive to model parameters and show model-preference. The rapidity dependence of \pi^{-}/\pi^{+} and \bar{p}/p ratios in peripheral d+Au and forward neutron-tagged events are used to study the contributions of valence quarks and gluons to particle production at high pT. The results are compared to calculations based on NLO pQCD and other measurements of quark fragmentation functions.
We study the energy dependence of the transverse momentum (pT) spectra for charged pions, protons and anti-protons for Au+Au collisions at \sqrt{s_NN} = 62.4 and 200 GeV. Data are presented at mid-rapidity (|y| < 0.5) for 0.2 < pT < 12 GeV/c. In the intermediate pT region (2 < pT < 6 GeV/c), the nuclear modification factor is higher at 62.4 GeV than at 200 GeV, while at higher pT (pT >7 GeV/c) the modification is similar for both energies. The p/pi+ and pbar/pi- ratios for central collisions at \sqrt{s_NN} = 62.4 GeV peak at pT ~ 2 GeV/c. In the pT range where recombination is expected to dominate, the p/pi+ ratios at 62.4 GeV are larger than at 200 GeV, while the pbar/pi- ratios are smaller. For pT > 2 GeV/c, the pbar/pi- ratios at the two beam energies are independent of pT and centrality indicating that the dependence of the pbar/pi- ratio on pT does not change between 62.4 and 200 GeV. These findings challenge various models incorporating jet quenching and/or constituent quark coalescence.
A search for the supersymmetric partners of quarks and gluons (squarks and gluinos) in final states containing hadronic jets and missing transverse momentum, but no electrons or muons, is presented. The data used in this search were recorded in 2015 and 2016 by the ATLAS experiment in $\sqrt{s}$=13 TeV proton--proton collisions at the Large Hadron Collider, corresponding to an integrated luminosity of 36.1 fb$^{-1}$. The results are interpreted in the context of various models where squarks and gluinos are pair-produced and the neutralino is the lightest supersymmetric particle. An exclusion limit at the 95\% confidence level on the mass of the gluino is set at 2.03 TeV for a simplified model incorporating only a gluino and the lightest neutralino, assuming the lightest neutralino is massless. For a simplified model involving the strong production of mass-degenerate first- and second-generation squarks, squark masses below 1.55 TeV are excluded if the lightest neutralino is massless. These limits substantially extend the region of supersymmetric parameter space previously excluded by searches with the ATLAS detector.
Observed and expected background and signal effective mass distributions for SR2j-2100. For signal, a squark direct decay model where squarks have mass of 600 GeV and the neutralino1 has mass of 595 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2j-2800. For signal, a squark direct decay model where squarks have mass of 1500 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR4j-1000. For signal, a gluino direct decay model where gluinos have mass of 1300 GeV and the neutralino1 has mass of 900 GeV is shown.
Observed and expected background and signal effective mass distributions for SR4j-2200. For signal, a gluino direct decay model where gluinos have mass of 1800 GeV and the neutralino1 has mass of 800 GeV is shown.
Observed and expected background and signal effective mass distributions for SR6j-2600. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2jB-2400. For signal, a gluino onestep decay model where gluinos have mass of 1600 GeV, the chargino1 has mass of 1590 GeV and the neutralino1 has mass of 60 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2j-1200. For signal, a squark direct decay model where squarks have mass of 900 GeV and the neutralino1 has mass of 500 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2j-1600. For signal, a squark direct decay model where squarks have mass of 1200 GeV and the neutralino1 has mass of 500 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2j-2000. For signal, a squark direct decay model where squarks have mass of 1200 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2j-2400. For signal, a squark direct decay model where squarks have mass of 1500 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2j-3600. For signal, a squark direct decay model where squarks have mass of 1200 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR2jB-1600. For signal, a gluino onestep decay model where gluinos have mass of 1600 GeV, the chargino1 has mass of 1590 GeV and the neutralino1 has mass of 60 GeV is shown.
Observed and expected background and signal effective mass distributions for SR3j-1300. For signal, a squark direct decay model where squarks have mass of 600 GeV and the neutralino1 has mass of 595 GeV is shown.
Observed and expected background and signal effective mass distributions for SR4j-1400. For signal, a gluino direct decay model where gluinos have mass of 1800 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR4j-1800. For signal, a gluino direct decay model where gluinos have mass of 1800 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR4j-2600. For signal, a gluino direct decay model where gluinos have mass of 1800 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR4j-3000. For signal, a gluino direct decay model where gluinos have mass of 1800 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR5j-1600. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed and expected background and signal effective mass distributions for SR5j-1700. For signal, a gluino direct decay model where gluinos have mass of 1800 GeV and the neutralino1 has mass of 0 GeV is shown.
Observed and expected background and signal effective mass distributions for SR5j-2000. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed and expected background and signal effective mass distributions for SR5j-2600. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed and expected background and signal effective mass distributions for SR6j-1200. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed and expected background and signal effective mass distributions for SR6j-1800. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed and expected background and signal effective mass distributions for SR6j-2200. For signal, a gluino onestep decay model where gluinos have mass of 1705 GeV, the chargino1 has mass of 865 GeV and the neutralino1 has mass of 25 GeV is shown.
Observed 95% CL upper limit on the signal cross-section from searches in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from searches on the light-flavor squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from searches on the light-flavor squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the light-flavor squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the light-flavor squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from RJR-based searches on the light-flavor squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from RJR-based searches on the light-flavor squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay directly into the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from searches in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from RJR-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from RJR-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay directly into the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from searches in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from searches on the squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from searches on the squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from RJR-based searches on the squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from RJR-based searches on the squark and lightest neutralino masses in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the squark mass and the mass gap ratio x in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the squark mass and the mass gap ratio x in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from searches in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from RJR-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from RJR-based searches on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the gluino mass and the mass gap ratio x in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the gluino mass and the mass gap ratio x in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate the second lightest neutralino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{2}^{0} \rightarrow qq Z \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the gluino and second lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate the second lightest neutralino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{2}^{0} \rightarrow qq Z \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the gluino and second lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate the second lightest neutralino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{2}^{0} \rightarrow qq Z \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino or second lightest neutralino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$, or $\tilde{q} \rightarrow q \tilde{\chi}_{2}^{0} \rightarrow qq Z/h \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the squark mass and the mass gap ratio x in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino or second lightest neutralino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$, or $\tilde{q} \rightarrow q \tilde{\chi}_{2}^{0} \rightarrow qq Z/h \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the squark mass and the mass gap ratio x in a SUSY scenario where squarks are produced in pairs and decay via an intermediate lightest chargino or second lightest neutralino to the lightest neutralino, $\tilde{q} \rightarrow q \tilde{\chi}_{1}^{\pm} \rightarrow q W^{\pm} \tilde{\chi}_{1}^{0}$, or $\tilde{q} \rightarrow q \tilde{\chi}_{2}^{0} \rightarrow qq Z/h \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino or second lightest neutralino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$, or $\tilde{g} \rightarrow qq \tilde{\chi}_{2}^{0} \rightarrow qq Z/h \tilde{\chi}_{1}^{0}$.
Expected 95% CL exclusion contours from Meff-based searches on the gluino mass and the mass gap ratio x in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino or second lightest neutralino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$, or $\tilde{g} \rightarrow qq \tilde{\chi}_{2}^{0} \rightarrow qq Z/h \tilde{\chi}_{1}^{0}$.
Observed 95% CL exclusion contours from Meff-based searches on the gluino mass and the mass gap ratio x in a SUSY scenario where gluinos are produced in pairs and decay via an intermediate lightest chargino or second lightest neutralino to the lightest neutralino, $\tilde{g} \rightarrow qq \tilde{\chi}_{1}^{\pm} \rightarrow qq W^{\pm} \tilde{\chi}_{1}^{0}$, or $\tilde{g} \rightarrow qq \tilde{\chi}_{2}^{0} \rightarrow qq Z/h \tilde{\chi}_{1}^{0}$.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=0$ GeV.
Expected 95% CL exclusion contours from Meff-based searches on the gluino and squark masses for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=0$ GeV.
Observed 95% CL exclusion contours from Meff-based searches on the gluino and squark masses for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=0$ GeV.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=695$ GeV.
Expected 95% CL exclusion contours from Meff-based searches on the gluino and squark masses for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=695$ GeV.
Observed 95% CL exclusion contours from Meff-based searches on the gluino and squark masses for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=695$ GeV.
Observed 95% CL upper limit on the signal cross-section from Meff-based searches for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=995$ GeV.
Expected 95% CL exclusion contours from Meff-based searches on the gluino and squark masses for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=995$ GeV.
Observed 95% CL exclusion contours from Meff-based searches on the gluino and squark masses for inclusive squark-gluino production in pMSSM models with $m_{\tilde{\chi}_{1}^0}=995$ GeV.
Cut-flow of Meff-2j for three supersymmetric models: a gluino direct decay model where gluinos have mass of 2000 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 0 $\mathrm{\ Ge\kern -0.1em V}$ (10000 generated events); and a squark direct decay model where squarks have mass of 1200 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 600 $\mathrm{\ Ge\kern -0.1em V}$ (20000 generated events); and a squark direct decay model where squarks have mass of 1500 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 0 $\mathrm{\ Ge\kern -0.1em V}$ (10000 generated events). The numbers are normalized to a luminosity of 36.1 fb$^{-1}$.
Cut-flow of Meff-3j,4j for three supersymmetric models: a gluino direct decay model where gluinos have mass of 2000 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 0 $\mathrm{\ Ge\kern -0.1em V}$ (10000 generated events); and a squark direct decay model where squarks have mass of 1200 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 600 $\mathrm{\ Ge\kern -0.1em V}$ (20000 generated events); and a squark direct decay model where squarks have mass of 1500 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 0 $\mathrm{\ Ge\kern -0.1em V}$ (10000 generated events). The numbers are normalized to a luminosity of 36.1 fb$^{-1}$.
Cut-flow of Meff-5j,6j for three supersymmetric models: a gluino direct decay model where gluinos have mass of 2000 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 0 $\mathrm{\ Ge\kern -0.1em V}$ (10000 generated events); and a squark direct decay model where squarks have mass of 1200 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 600 $\mathrm{\ Ge\kern -0.1em V}$ (20000 generated events); and a squark direct decay model where squarks have mass of 1500 $\mathrm{\ Ge\kern -0.1em V}$ and the $\tilde{\chi}_{1}^{0}$ has mass of 0 $\mathrm{\ Ge\kern -0.1em V}$ (10000 generated events). The numbers are normalized to a luminosity of 36.1 fb$^{-1}$.
Cut-flow for RJR-based SR's targeting squarks for SS direct model points. Expected yields are normalized to a luminosity of 36.1 fb$^{-1}$.
Cut-flow for RJR-based SR's targeting gluinos for GG direct model points. Expected yields are normalized to a luminosity of 36.1 fb$^{-1}$.
Cut-flow for RJR-based SR's targeting compressed mass-spectra signals for SS direct and GG direct model points. Expected yields are normalized to a luminosity of 36.1 fb$^{-1}$.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-1200.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-1600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2000.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2400.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2800.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-3600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2100.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-3j-1300.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-1000.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-1400.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-1800.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-2200.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-2600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-3000.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-1700.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-1600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-2000.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-2600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-1200.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-1800.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-2200.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-2600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2jB-1600.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2jB-2400.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S1a.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S1b.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S2a.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S2b.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S3a.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S3b.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S4.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C1.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C2.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C3.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C4.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C5.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G1a.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G1b.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G2a.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G2b.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G3a.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G3b.
Signal region acceptance for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G4.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-1200.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-1600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2000.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2400.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2800.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-3600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2100.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-3j-1300.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-1000.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-1400.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-1800.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-2200.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-2600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-3000.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-1700.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-1600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-2000.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-2600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-1200.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-1800.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-2200.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-2600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2jB-1600.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2jB-2400.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S1a.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S1b.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S2a.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S2b.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S3a.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S3b.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S4.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C1.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C2.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C3.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C4.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C5.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G1a.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G1b.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G2a.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G2b.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G3a.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G3b.
Signal region acceptance for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G4.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-1200.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-1600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2000.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2400.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2800.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-3600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2100.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-3j-1300.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-1000.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-1400.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-1800.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-2200.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-2600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-3000.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-1700.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-1600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-2000.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-2600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-1200.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-1800.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-2200.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-2600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2jB-1600.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2jB-2400.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S1a.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S1b.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S2a.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S2b.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S3a.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S3b.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S4.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C1.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C2.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C3.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C4.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C5.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G1a.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G1b.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G2a.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G2b.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G3a.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G3b.
Signal region acceptance for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G4.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-1200.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-1600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2000.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2400.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2800.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-3600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2100.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-3j-1300.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-1000.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-1400.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-1800.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-2200.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-2600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-3000.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-1700.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-1600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-2000.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-2600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-1200.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-1800.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-2200.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-2600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2jB-1600.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2jB-2400.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S1a.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S1b.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S2a.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S2b.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S3a.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S3b.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S4.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C1.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C2.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C3.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C4.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-C5.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G1a.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G1b.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G2a.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G2b.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G3a.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G3b.
Signal region acceptance for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-G4.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-1200.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-1600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2000.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2400.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2800.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-3600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2j-2100.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-3j-1300.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-1000.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-1400.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-1800.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-2200.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-2600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-4j-3000.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-1700.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-1600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-2000.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-5j-2600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-1200.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-1800.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-2200.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-6j-2600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2jB-1600.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR Meff-2jB-2400.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S1a.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S1b.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S2a.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S2b.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S3a.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S3b.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-S4.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C1.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C2.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C3.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-C4.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G1a.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G1b.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G2a.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G2b.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G3a.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G3b.
Signal region efficiency for simplified model with squark pair production and direct decays to a quark and neutralino in SR RJR-G4.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-1200.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-1600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2000.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2400.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2800.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-3600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2j-2100.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-3j-1300.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-1000.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-1400.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-1800.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-2200.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-2600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-4j-3000.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-1700.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-1600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-2000.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-5j-2600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-1200.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-1800.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-2200.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-6j-2600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2jB-1600.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR Meff-2jB-2400.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S1a.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S1b.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S2a.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S2b.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S3a.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S3b.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-S4.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C1.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C2.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C3.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C4.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-C5.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G1a.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G1b.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G2a.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G2b.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G3a.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G3b.
Signal region efficiency for simplified model with gluino pair production and direct decays to two quarks and neutralino in SR RJR-G4.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-1200.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-1600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2000.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2400.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2800.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-3600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2j-2100.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-3j-1300.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-1000.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-1400.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-1800.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-2200.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-2600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-4j-3000.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-1700.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-1600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-2000.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-5j-2600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-1200.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-1800.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-2200.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-6j-2600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2jB-1600.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR Meff-2jB-2400.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S1a.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S1b.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S2a.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S2b.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S3a.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S3b.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-S4.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C1.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C2.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C3.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C4.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-C5.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G1a.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G1b.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G2a.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G2b.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G3a.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G3b.
Signal region efficiency for simplified model with squark pair production and decays to a quark and chargino in SR RJR-G4.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-1200.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-1600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2000.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2400.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2800.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-3600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2j-2100.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-3j-1300.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-1000.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-1400.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-1800.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-2200.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-2600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-4j-3000.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-1700.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-1600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-2000.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-5j-2600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-1200.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-1800.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-2200.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-6j-2600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR Meff-2jB-1600.
Signal region efficiency for simplified model with gluino pair production and decays to two quarks and chargino in SR RJR-S3b.
The results of a search for electroweakino pair production $pp \rightarrow \tilde\chi^\pm_1 \tilde\chi^0_2$ in which the chargino ($\tilde\chi^\pm_1$) decays into a $W$ boson and the lightest neutralino ($\tilde\chi^0_1$), while the heavier neutralino ($\tilde\chi^0_2$) decays into the Standard Model 125 GeV Higgs boson and a second $\tilde\chi^0_1$ are presented. The signal selection requires a pair of $b$-tagged jets consistent with those from a Higgs boson decay, and either an electron or a muon from the $W$ boson decay, together with missing transverse momentum from the corresponding neutrino and the stable neutralinos. The analysis is based on data corresponding to 139 $\mathrm{fb}^{-1}$ of $\sqrt{s}=13$ TeV $pp$ collisions provided by the Large Hadron Collider and recorded by the ATLAS detector. No statistically significant evidence of an excess of events above the Standard Model expectation is found. Limits are set on the direct production of the electroweakinos in simplified models, assuming pure wino cross-sections. Masses of $\tilde{\chi}^{\pm}_{1}/\tilde{\chi}^{0}_{2}$ up to 740 GeV are excluded at 95% confidence level for a massless $\tilde{\chi}^{0}_{1}$.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-onHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offLM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offMM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution is shown in the validation region VR-offHM after all the selection requirements are applied other than the $m_{CT}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. The red line with arrow indicates the $m_{CT}$ cut used in SR selection. The first and the last bin include the underflow and overflow events (where present), respectively.
The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-HM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-MM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{CT}$ distribution for SR-LM. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-HM after all the selection requirements are applied other than the $m_{bb}$ cut. The stacked histograms show the expected SM backgrounds. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection.The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-MM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The post-fit $m_{bb}$ distribution is shown in the signal region SR-LM after all the selection requirements are applied other than the $m_{bb}$ cut. The hatched bands represent the sum in quadrature of systematic and statistical uncertainties of the total SM background. For illustration, the distribution of the SUSY reference points are also shown as dashed lines. The red line with arrow indicates the $m_{bb}$ cut used in SR selection. The overflow events, where present, are included in the last bin.
The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The observed exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion up limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The observed exclusion down limit for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. The red dotted lines indicate the $\pm 1 \sigma$ on the observed exclusion limit due to the theoretical uncertainties in the signal cross-section.
The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
The expected exclusion for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. Experimental and theoretical systematic uncertainties are applied to background and signal samples and illustrated by the yellow band and the red dotted contour lines, respectively. The red dotted lines indicate the $\pm$ 1 standard-deviation variation on the observed exclusion limit due to theoretical uncertainties in the signal cross-section.
Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Upper limits on the cross sections for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production
Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production
Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production
Signal acceptance in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production. 1lb\bar{b}$ production
Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal acceptance in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-LM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-MM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM low $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM med. $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Signal efficiency in SR-HM high $m_{CT}$ for simplified models with $\tilde\chi^\pm_1 \tilde\chi^0_2 \rightarrow Wh\tilde\chi^0_1\tilde\chi^0_1, W \rightarrow l\nu, h \rightarrow b\bar{b}$ production.
Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-LM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-MM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM low $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM med. $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the SR-HM high $m_{CT}$. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-LM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-MM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
Event selection cutflow for a representative signal sample for the discovery SR-HM. The masses of next-lightest-neutralinos and LSPs are reported. While the first row of the table reports the total raw MC events produced, all subsequent rows show weighted events. Only statistical uncertainties are shown. Samples are produced with generator filters which selects $h\rightarrow b\bar{b}$ and $W\rightarrow\ell\nu$ decays.
The result of a search for the pair production of the lightest supersymmetric partner of the bottom quark ($\tilde{b}_{1}$) using 139 fb$^{-1}$ of proton-proton data collected at $\sqrt{s} = 13$ TeV by the ATLAS detector is reported. In the supersymmetric scenarios considered both of the bottom-squarks decay into a $b$-quark and the second-lightest neutralino, $\tilde{b}_{1} \rightarrow b + \tilde{\chi}^{0}_{2}$. Each $\tilde{\chi}^{0}_{2}$ is assumed to subsequently decay with 100% branching ratio into a Higgs boson ($h$) like the one in the Standard Model and the lightest neutralino: $\tilde{\chi}^{0}_{2} \rightarrow h + \tilde{\chi}^{0}_{1}$. The $\tilde{\chi}^{0}_{1}$ is assumed to be the lightest supersymmetric particle (LSP) and is stable. Two signal mass configurations are targeted: the first has a constant LSP mass of 60 GeV; and the second has a constant mass difference between the $\tilde{\chi}^{0}_{2}$ and $\tilde{\chi}^{0}_{1}$ of 130 GeV. The final states considered contain no charged leptons, three or more $b$-jets, and large missing transverse momentum. No significant excess of events over the Standard Model background expectation is observed in any of the signal regions considered. Limits at the 95% confidence level are placed in the supersymmetric models considered, and bottom-squarks with mass up to 1.5 TeV are excluded.
Distributions of ${E}_{\mathrm{T}}^{\mathrm{miss}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of ${E}_{\mathrm{T}}^{\mathrm{miss}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of ${E}_{\mathrm{T}}^{\mathrm{miss}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of $m_{\mathrm{eff}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of $m_{\mathrm{eff}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of $m_{\mathrm{eff}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of Object-based $E_{\mathrm{T}}^{\mathrm{miss}} {Sig.}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of Object-based $E_{\mathrm{T}}^{\mathrm{miss}} {Sig.}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of Object-based $E_{\mathrm{T}}^{\mathrm{miss}} {Sig.}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of MaxMin alternative algorithm $m(h_{\mathrm{cand1}},h_{\mathrm{cand2}})_{\mathrm{avg}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of MaxMin alternative algorithm $m(h_{\mathrm{cand1}},h_{\mathrm{cand2}})_{\mathrm{avg}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of MaxMin alternative algorithm $m(h_{\mathrm{cand1}},h_{\mathrm{cand2}})_{\mathrm{avg}}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of Leading jet $p_T$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of Leading jet $p_T$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of Leading jet $p_T$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of MaxMin algorithm $m_{hcand}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of MaxMin algorithm $m_{hcand}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Distributions of MaxMin algorithm $m_{hcand}$ after the background-only fit. The backgrounds which contribute only a small amount (diboson, W+jets and ttbar+W/Z/h) are grouped and labelled as `Other'.
Signal efficiency in SRA_M_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_M_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_M_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal acceptance in SRC_28 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_28 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_28 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_26 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_26 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_26 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_24 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_24 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_24 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_M_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_M_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_M_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRB for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRB for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRB for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_L_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_L_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_L_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_incl for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_incl for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_incl for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_L_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_L_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_L_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_incl_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_incl_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_incl_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_incl_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_incl_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_incl_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal efficiency in SRA_H_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_H_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_H_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_L_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_L_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_L_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRB for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRB for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRB for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal acceptance in SRC_22 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_22 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRC_22 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal efficiency in SRA_H_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_H_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_H_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_24 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_24 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_24 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_26 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_26 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_26 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal acceptance in SRA_H_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_H_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_H_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal efficiency in SRA_incl_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_incl_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_incl_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_22 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_22 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_22 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal acceptance in SRA_M_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_M_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_M_m60 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal efficiency in SRC_28 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_28 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_28 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal acceptance in SRA_H_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_H_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal acceptance in SRA_H_dm130 for simplified models with $\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$ production
Signal efficiency in SRA_incl_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_incl_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_incl_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_L_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_L_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_L_m60 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_M_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_M_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRA_M_dm130 for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_incl for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_incl for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Signal efficiency in SRC_incl for simplified models with '$\widetilde{b}\widetilde{b}$ $\rightarrow$ $b\bar{b} \widetilde{\chi}_2^0 \widetilde{\chi}_2^0$ $\rightarrow$ hh$\widetilde{\chi}_1^0 \widetilde{\chi}_1^0$, h $\rightarrow$ $b\bar{b}$' production
Observed 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.
Observed 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.
Observed 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.
Expected 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.
Expected 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.
Expected 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.
Observed 95% CLs exclusion limit for the $M(\widetilde{\chi}_{1}^{0})$=60GeV signal grid for the best combined signal regions.
Observed 95% CLs exclusion limit for the $M(\widetilde{\chi}_{1}^{0})$=60GeV signal grid for the best combined signal regions.
Observed 95% CLs exclusion limit for the $M(\widetilde{\chi}_{1}^{0})$=60GeV signal grid for the best combined signal regions.
Expected 95% CLs exclusion limit for the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid for the best combined signal regions.
Expected 95% CLs exclusion limit for the $M(\widetilde{\chi}_{1}^{0})$=60GeV signal grid for the best combined signal regions.
Expected 95% CLs exclusion limit for the $M(\widetilde{\chi}_{1}^{0})$=60GeV signal grid for the best combined signal regions.
Model dependent upper limit on the best combined signal regions considered in the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid
Model dependent upper limit on the best combined signal regions considered in the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid
Model dependent upper limit on the best combined signal regions considered in the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid
Model dependet upper limits on the best combined signal regions considered in the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid
Model dependet upper limits on the best combined signal regions considered in the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid
Model dependet upper limits on the best combined signal regions considered in the $\Delta M(\widetilde{\chi}_{2}^{0},\widetilde{\chi}_{1}^{0})$=130GeV signal grid
Result of background only fit applied to signal regions. Event yields from the signal regions compared with SM MC predictions for the 3 highest contributing backgrounds separately and combined minor backgrounds.
Result of background only fit applied to signal regions. Event yields from the signal regions compared with SM MC predictions for the 3 highest contributing backgrounds separately and combined minor backgrounds.
Result of background only fit applied to signal regions. Event yields from the signal regions compared with SM MC predictions for the 3 highest contributing backgrounds separately and combined minor backgrounds.
Expected background event yields and dominant systematic uncertainties on background estimates in the A-type (inclusive), B-type and C-type (inclusive) regions.
Expected background event yields and dominant systematic uncertainties on background estimates in the A-type (inclusive), B-type and C-type (inclusive) regions.
Expected background event yields and dominant systematic uncertainties on background estimates in the A-type (inclusive), B-type and C-type (inclusive) regions.
Background-only fit results for the A- and B-type regions performed using 139$fb^{-1}$ of data. The quoted uncertainties on the fitted SM background include both the statistical and systematic uncertainties.
Background-only fit results for the A- and B-type regions performed using 139$fb^{-1}$ of data. The quoted uncertainties on the fitted SM background include both the statistical and systematic uncertainties.
Background-only fit results for the A- and B-type regions performed using 139$fb^{-1}$ of data. The quoted uncertainties on the fitted SM background include both the statistical and systematic uncertainties.
Background-only fit results for the C-type region performed using 139$fb^{-1}$ of data. The quoted uncertainties on the fitted SM background include both the statistical and systematic uncertainties.
Background-only fit results for the C-type region performed using 139$fb^{-1}$ of data. The quoted uncertainties on the fitted SM background include both the statistical and systematic uncertainties.
Background-only fit results for the C-type region performed using 139$fb^{-1}$ of data. The quoted uncertainties on the fitted SM background include both the statistical and systematic uncertainties.
Observed 95% CL upper limits on the visible cross sections σvis, the observed (S95obs) and expected (S95exp) 95% CL upper limits on the number of signal events with ± 1 σ excursions of the expectation, the CL of the background-only hypothesis, CLB, the discovery p-value (p0), truncated at 0.5, and the associated significance.
Observed 95% CL upper limits on the visible cross sections σvis, the observed (S95obs) and expected (S95exp) 95% CL upper limits on the number of signal events with ± 1 σ excursions of the expectation, the CL of the background-only hypothesis, CLB, the discovery p-value (p0), truncated at 0.5, and the associated significance.
Observed 95% CL upper limits on the visible cross sections σvis, the observed (S95obs) and expected (S95exp) 95% CL upper limits on the number of signal events with ± 1 σ excursions of the expectation, the CL of the background-only hypothesis, CLB, the discovery p-value (p0), truncated at 0.5, and the associated significance.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRA selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (1100, 330, 200)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRA selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (1100, 330, 200)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRA selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (1100, 330, 200)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRB selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (700, 680, 550)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRB selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (700, 680, 550)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRB selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (700, 680, 550)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRC selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (1200, 1150, 60)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRC selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (1200, 1150, 60)$ GeV, considered.
Cutflow of the MC events scaled to 139 $fb^{-1}$ for the SRC selections, with a scalar bottom signal of m$(\widetilde{b}_{1},\widetilde{\chi}_2^0,\widetilde{\chi}_1^0) = (1200, 1150, 60)$ GeV, considered.
A search for direct pair production of scalar partners of the top quark (top squarks or scalar third-generation up-type leptoquarks) in the all-hadronic $t\bar{t}$ plus missing transverse momentum final state is presented. The analysis of 139 fb$^{-1}$ of ${\sqrt{s}=13}$ TeV proton-proton collision data collected using the ATLAS detector at the LHC yields no significant excess over the Standard Model background expectation. To interpret the results, a supersymmetric model is used where the top squark decays via $\tilde{t} \to t^{(*)} \tilde{\chi}^0_1$, with $t^{(*)}$ denoting an on-shell (off-shell) top quark and $\tilde{\chi}^0_1$ the lightest neutralino. Three specific event selections are optimised for the following scenarios. In the scenario where $m_{\tilde{t}}> m_t+m_{\tilde{\chi}^0_1}$, top squark masses are excluded in the range 400-1250 GeV for $\tilde{\chi}^0_1$ masses below $200$ GeV at 95 % confidence level. In the situation where $m_{\tilde{t}}\sim m_t+m_{\tilde{\chi}^0_1}$, top squark masses in the range 300-630 GeV are excluded, while in the case where $m_{\tilde{t}}< m_W+m_b+m_{\tilde{\chi}^0_1}$ (with $m_{\tilde{t}}-m_{\tilde{\chi}^0_1}\ge 5$ GeV), considered for the first time in an ATLAS all-hadronic search, top squark masses in the range 300-660 GeV are excluded. Limits are also set for scalar third-generation up-type leptoquarks, excluding leptoquarks with masses below $1240$ GeV when considering only leptoquark decays into a top quark and a neutrino.
<b>- - - - - - - - Overview of HEPData Record - - - - - - - -</b> <br><br> <b>Exclusion contours:</b> <ul> <li><a href="?table=stop_obs">Stop exclusion contour (Obs.)</a> <li><a href="?table=stop_obs_down">Stop exclusion contour (Obs. Down)</a> <li><a href="?table=stop_obs_up">Stop exclusion contour (Obs. Up)</a> <li><a href="?table=stop_exp">Stop exclusion contour (Exp.)</a> <li><a href="?table=stop_exp_down">Stop exclusion contour (Exp. Down)</a> <li><a href="?table=stop_exp_up">Stop exclusion contour (Exp. Up)</a> <li><a href="?table=LQ3u_obs">LQ3u exclusion contour (Obs.)</a> <li><a href="?table=LQ3u_obs_down">LQ3u exclusion contour (Obs. Down)</a> <li><a href="?table=LQ3u_obs_up">LQ3u exclusion contour (Obs. Up)</a> <li><a href="?table=LQ3u_exp">LQ3u exclusion contour (Exp.)</a> <li><a href="?table=LQ3u_exp_down">LQ3u exclusion contour (Exp. Down)</a> <li><a href="?table=LQ3u_exp_up">LQ3u exclusion contour (Exp. Up)</a> </ul> <b>Upper limits:</b> <ul> <li><a href="?table=stop_xSecUpperLimit_obs">stop_xSecUpperLimit_obs</a> <li><a href="?table=stop_xSecUpperLimit_exp">stop_xSecUpperLimit_exp</a> <li><a href="?table=LQ3u_xSecUpperLimit_obs">LQ3u_xSecUpperLimit_obs</a> <li><a href="?table=LQ3u_xSecUpperLimit_exp">LQ3u_xSecUpperLimit_exp</a> </ul> <b>Kinematic distributions:</b> <ul> <li><a href="?table=SRATW_metsigST">SRATW_metsigST</a> <li><a href="?table=SRBTT_m_1fatjet_kt12">SRBTT_m_1fatjet_kt12</a> <li><a href="?table=SRC_RISR">SRC_RISR</a> <li><a href="?table=SRD0_htSig">SRD0_htSig</a> <li><a href="?table=SRD1_htSig">SRD1_htSig</a> <li><a href="?table=SRD2_htSig">SRD2_htSig</a> </ul> <b>Cut flows:</b> <ul> <li><a href="?table=cutflow_SRATT">cutflow_SRATT</a> <li><a href="?table=cutflow_SRATW">cutflow_SRATW</a> <li><a href="?table=cutflow_SRAT0">cutflow_SRAT0</a> <li><a href="?table=cutflow_SRB">cutflow_SRB</a> <li><a href="?table=cutflow_SRC">cutflow_SRC</a> <li><a href="?table=cutflow_SRD0">cutflow_SRD0</a> <li><a href="?table=cutflow_SRD1">cutflow_SRD1</a> <li><a href="?table=cutflow_SRD2">cutflow_SRD2</a> </ul> <b>Acceptance and efficiencies:</b> As explained in <a href="https://twiki.cern.ch/twiki/bin/view/AtlasPublic/SupersymmetryPublicResults#summary_of_auxiliary_material">the twiki</a>. <ul> <li> <b>SRATT:</b> <a href="?table=Acc_SRATT">Acc_SRATT</a> <a href="?table=Eff_SRATT">Eff_SRATT</a> <li> <b>SRATW:</b> <a href="?table=Acc_SRATW">Acc_SRATW</a> <a href="?table=Eff_SRATW">Eff_SRATW</a> <li> <b>SRAT0:</b> <a href="?table=Acc_SRAT0">Acc_SRAT0</a> <a href="?table=Eff_SRAT0">Eff_SRAT0</a> <li> <b>SRBTT:</b> <a href="?table=Acc_SRBTT">Acc_SRBTT</a> <a href="?table=Eff_SRBTT">Eff_SRBTT</a> <li> <b>SRBTW:</b> <a href="?table=Acc_SRBTW">Acc_SRBTW</a> <a href="?table=Eff_SRBTW">Eff_SRBTW</a> <li> <b>SRBT0:</b> <a href="?table=Acc_SRBT0">Acc_SRBT0</a> <a href="?table=Eff_SRBT0">Eff_SRBT0</a> <li> <b>SRC1:</b> <a href="?table=Acc_SRC1">Acc_SRC1</a> <a href="?table=Eff_SRC1">Eff_SRC1</a> <li> <b>SRC2:</b> <a href="?table=Acc_SRC2">Acc_SRC2</a> <a href="?table=Eff_SRC2">Eff_SRC2</a> <li> <b>SRC3:</b> <a href="?table=Acc_SRC3">Acc_SRC3</a> <a href="?table=Eff_SRC3">Eff_SRC3</a> <li> <b>SRC4:</b> <a href="?table=Acc_SRC4">Acc_SRC4</a> <a href="?table=Eff_SRC4">Eff_SRC4</a> <li> <b>SRC5:</b> <a href="?table=Acc_SRC5">Acc_SRC5</a> <a href="?table=Eff_SRC5">Eff_SRC5</a> <li> <b>SRD0:</b> <a href="?table=Acc_SRD0">Acc_SRD0</a> <a href="?table=Eff_SRD0">Eff_SRD0</a> <li> <b>SRD1:</b> <a href="?table=Acc_SRD1">Acc_SRD1</a> <a href="?table=Eff_SRD1">Eff_SRD1</a> <li> <b>SRD2:</b> <a href="?table=Acc_SRD2">Acc_SRD2</a> <a href="?table=Eff_SRD2">Eff_SRD2</a> </ul> <b>Truth Code snippets</b> and <b>SLHA</a> files are available under "Resources" (purple button on the left)
<b>- - - - - - - - Overview of HEPData Record - - - - - - - -</b> <br><br> <b>Exclusion contours:</b> <ul> <li><a href="?table=stop_obs">Stop exclusion contour (Obs.)</a> <li><a href="?table=stop_obs_down">Stop exclusion contour (Obs. Down)</a> <li><a href="?table=stop_obs_up">Stop exclusion contour (Obs. Up)</a> <li><a href="?table=stop_exp">Stop exclusion contour (Exp.)</a> <li><a href="?table=stop_exp_down">Stop exclusion contour (Exp. Down)</a> <li><a href="?table=stop_exp_up">Stop exclusion contour (Exp. Up)</a> <li><a href="?table=LQ3u_obs">LQ3u exclusion contour (Obs.)</a> <li><a href="?table=LQ3u_obs_down">LQ3u exclusion contour (Obs. Down)</a> <li><a href="?table=LQ3u_obs_up">LQ3u exclusion contour (Obs. Up)</a> <li><a href="?table=LQ3u_exp">LQ3u exclusion contour (Exp.)</a> <li><a href="?table=LQ3u_exp_down">LQ3u exclusion contour (Exp. Down)</a> <li><a href="?table=LQ3u_exp_up">LQ3u exclusion contour (Exp. Up)</a> </ul> <b>Upper limits:</b> <ul> <li><a href="?table=stop_xSecUpperLimit_obs">stop_xSecUpperLimit_obs</a> <li><a href="?table=stop_xSecUpperLimit_exp">stop_xSecUpperLimit_exp</a> <li><a href="?table=LQ3u_xSecUpperLimit_obs">LQ3u_xSecUpperLimit_obs</a> <li><a href="?table=LQ3u_xSecUpperLimit_exp">LQ3u_xSecUpperLimit_exp</a> </ul> <b>Kinematic distributions:</b> <ul> <li><a href="?table=SRATW_metsigST">SRATW_metsigST</a> <li><a href="?table=SRBTT_m_1fatjet_kt12">SRBTT_m_1fatjet_kt12</a> <li><a href="?table=SRC_RISR">SRC_RISR</a> <li><a href="?table=SRD0_htSig">SRD0_htSig</a> <li><a href="?table=SRD1_htSig">SRD1_htSig</a> <li><a href="?table=SRD2_htSig">SRD2_htSig</a> </ul> <b>Cut flows:</b> <ul> <li><a href="?table=cutflow_SRATT">cutflow_SRATT</a> <li><a href="?table=cutflow_SRATW">cutflow_SRATW</a> <li><a href="?table=cutflow_SRAT0">cutflow_SRAT0</a> <li><a href="?table=cutflow_SRB">cutflow_SRB</a> <li><a href="?table=cutflow_SRC">cutflow_SRC</a> <li><a href="?table=cutflow_SRD0">cutflow_SRD0</a> <li><a href="?table=cutflow_SRD1">cutflow_SRD1</a> <li><a href="?table=cutflow_SRD2">cutflow_SRD2</a> </ul> <b>Acceptance and efficiencies:</b> As explained in <a href="https://twiki.cern.ch/twiki/bin/view/AtlasPublic/SupersymmetryPublicResults#summary_of_auxiliary_material">the twiki</a>. <ul> <li> <b>SRATT:</b> <a href="?table=Acc_SRATT">Acc_SRATT</a> <a href="?table=Eff_SRATT">Eff_SRATT</a> <li> <b>SRATW:</b> <a href="?table=Acc_SRATW">Acc_SRATW</a> <a href="?table=Eff_SRATW">Eff_SRATW</a> <li> <b>SRAT0:</b> <a href="?table=Acc_SRAT0">Acc_SRAT0</a> <a href="?table=Eff_SRAT0">Eff_SRAT0</a> <li> <b>SRBTT:</b> <a href="?table=Acc_SRBTT">Acc_SRBTT</a> <a href="?table=Eff_SRBTT">Eff_SRBTT</a> <li> <b>SRBTW:</b> <a href="?table=Acc_SRBTW">Acc_SRBTW</a> <a href="?table=Eff_SRBTW">Eff_SRBTW</a> <li> <b>SRBT0:</b> <a href="?table=Acc_SRBT0">Acc_SRBT0</a> <a href="?table=Eff_SRBT0">Eff_SRBT0</a> <li> <b>SRC1:</b> <a href="?table=Acc_SRC1">Acc_SRC1</a> <a href="?table=Eff_SRC1">Eff_SRC1</a> <li> <b>SRC2:</b> <a href="?table=Acc_SRC2">Acc_SRC2</a> <a href="?table=Eff_SRC2">Eff_SRC2</a> <li> <b>SRC3:</b> <a href="?table=Acc_SRC3">Acc_SRC3</a> <a href="?table=Eff_SRC3">Eff_SRC3</a> <li> <b>SRC4:</b> <a href="?table=Acc_SRC4">Acc_SRC4</a> <a href="?table=Eff_SRC4">Eff_SRC4</a> <li> <b>SRC5:</b> <a href="?table=Acc_SRC5">Acc_SRC5</a> <a href="?table=Eff_SRC5">Eff_SRC5</a> <li> <b>SRD0:</b> <a href="?table=Acc_SRD0">Acc_SRD0</a> <a href="?table=Eff_SRD0">Eff_SRD0</a> <li> <b>SRD1:</b> <a href="?table=Acc_SRD1">Acc_SRD1</a> <a href="?table=Eff_SRD1">Eff_SRD1</a> <li> <b>SRD2:</b> <a href="?table=Acc_SRD2">Acc_SRD2</a> <a href="?table=Eff_SRD2">Eff_SRD2</a> </ul> <b>Truth Code snippets</b> and <b>SLHA</a> files are available under "Resources" (purple button on the left)
The observed exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded.
The observed exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contours are excluded.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contour are excluded.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$. Masses that are within the contour are excluded.
The minus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The minus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The plus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The plus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The minus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The minus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The plus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The plus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{\tilde{\chi}^{0}_{1}}$ vs. $\it{m}_{\tilde{t}}$.
The observed exclusion contour at 95% CL as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$. Points that are within the contours are excluded.
The observed exclusion contour at 95% CL as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$. Points that are within the contours are excluded.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$. Points that are within the contours are excluded.
The expected exclusion contour at 95% CL as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$. Points that are within the contours are excluded.
The minus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The minus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The plus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The plus $1\sigma$ variation of observed exclusion contour obtained by varying the signal cross section within its uncertainty. The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The plus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The plus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The minus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
The minus $1\sigma$ variation of expected exclusion contour obtained by varying MC statistical uncertainties, detector-related systematic uncertainties, and theoretical uncertainties (excluding signal cross section uncertainties). The contour is given as a function of the $\it{m}_{LQ_{3}^{u}}$ vs. $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau)$
Model dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{0}_{1})$ signal grid. The column titled 'Leading Region' stores information on which of the fit regions (SRA-B, SRC or SRD) is the dominant based on the expected CLs values.
Model dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{0}_{1})$ signal grid. The column titled 'Leading Region' stores information on which of the fit regions (SRA-B, SRC or SRD) is the dominant based on the expected CLs values.
Expected model dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{0}_{1})$ signal grid. The column titled 'Leading Region' stores information on which of the fit regions (SRA-B, SRC or SRD) is the dominant based on the expected CLs values.
Expected model dependent upper limit on the cross section for the $(\tilde{t},\tilde{\chi}^{0}_{1})$ signal grid. The column titled 'Leading Region' stores information on which of the fit regions (SRA-B, SRC or SRD) is the dominant based on the expected CLs values.
Model dependent upper limit on the cross section for the $LQ_{3}^{u}$ signal grid with $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau))=0$ %. Only the SRA-B fit region is considered in this interpretation.
Model dependent upper limit on the cross section for the $LQ_{3}^{u}$ signal grid with $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau))=0$ %. Only the SRA-B fit region is considered in this interpretation.
Expected model dependent upper limit on the cross section for the $LQ_{3}^{u}$ signal grid with $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau))=0$ %. Only the SRA-B fit region is considered in this interpretation.
Expected model dependent upper limit on the cross section for the $LQ_{3}^{u}$ signal grid with $\mathrm{BR}(\it{m}_{LQ_{3}^{u}}\rightarrow b \tau))=0$ %. Only the SRA-B fit region is considered in this interpretation.
The distributions of $S$ in SRA-TW. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $S$ in SRA-TW. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $\it{m}^{\mathrm{R=1.2}}_{1}$ in SRB-TT. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $\it{m}^{\mathrm{R=1.2}}_{1}$ in SRB-TT. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of R$_{ISR}$ in SRC signal regions before R$_{ISR}$ cuts are applied. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of R$_{ISR}$ in SRC signal regions before R$_{ISR}$ cuts are applied. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD0. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD0. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD1. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD1. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD2. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
The distributions of $E^{miss}_{T}/\sqrt{H_{T}}$ in SRD2. For each bin yields for the data, total SM prediction and a representative signal point are provided. The SM prediction is provided with the MC statistical uncertainties, labeled 'stat', and the remaining uncertainties, labeled 'syst' that include detector-related systematic uncertainties and theoretical uncertainties. The signal predictions is provided with the MC statistical uncertainties only. The rightmost bin includes overflow events.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-TT. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-TT. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-TW. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-TW. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-T0. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (1300,1)\ \mathrm{GeV} $ in SRA-T0. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 30000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (700,400)\ \mathrm{GeV} $ in signal regions SRB-TT, SRB-TW and SRB-T0. The regions differ by the last cut applied. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 60000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (700,400)\ \mathrm{GeV} $ in signal regions SRB-TT, SRB-TW and SRB-T0. The regions differ by the last cut applied. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 60000 raw MC events were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (500,327)\ \mathrm{GeV} $ in regions SRC-1, SRC-2, SRC-3, SRC-4 and SRC-5. The regions differ by the last cut applied. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 150000 raw MC events with filter efficiency of 0.384 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (500,327)\ \mathrm{GeV} $ in regions SRC-1, SRC-2, SRC-3, SRC-4 and SRC-5. The regions differ by the last cut applied. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 150000 raw MC events with filter efficiency of 0.384 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD0. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD0. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD1. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD1. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD2. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Cutflow for the reference point $(\it{m}_{\tilde{t}}, \it{m}_{\tilde{\chi}^{0}_{1}})= (550,500)\ \mathrm{GeV} $ in SRD2. The column labelled ''Weighted yield'' shows the results including all correction factors applied to simulation, and is normalised to 139 fb$^{-1}$. A notable exception concerns results in the first row, labelled ''Total'', that corresponds to plain $\sigma \cdot \mathcal{L}$ expected. The ''Derivation skim'' includes the requirements that $H_{T}$, the scalar sum of $p_{T}$ of jets and leptons, $H_{T}>150\ \mathrm{GeV}$ or that a ''baseline'' electron or muon has $p_{T}>20\ \mathrm{GeV}$. The definition of ''baseline'' electron/muons, lepton and $\tau$ vetos are described in the main body of the paper. In total 90000 raw MC events with filter efficiency of 0.428 were generated prior to the specified cuts, with the column ''Unweighted yield'' collecting the numbers after each cut.
Signal acceptance in SRA-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal acceptance in SRA-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in SRA-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal efficiency in SRA-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal acceptance in SRA-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal acceptance in SRA-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in SRA-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal efficiency in SRA-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal acceptance in SRA-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal acceptance in SRA-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in SRA-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal efficiency in SRA-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal acceptance in SRB-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal acceptance in SRB-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in SRB-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal efficiency in SRB-TT for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal acceptance in SRB-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal acceptance in SRB-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in SRB-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal efficiency in SRB-TW for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal acceptance in SRB-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal acceptance in SRB-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{3}$
Signal efficiency in SRB-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal efficiency in SRB-T0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in %.
Signal acceptance in SRC1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC3 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC3 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC3 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC3 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC4 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRC4 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC4 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ plane showed in the paper plot.
Signal efficiency in SRC4 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ plane showed in the paper plot.
Signal acceptance in SRC5 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ plane showed in the paper plot.
Signal acceptance in SRC5 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ plane showed in the paper plot.
Signal efficiency in SRC5 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRC5 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRD0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRD0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRD0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRD0 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRD1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRD1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRD1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRD1 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRD2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal acceptance in SRD2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the acceptance given in the table is multiplied by factor of $10^{5}$ and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRD2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
Signal efficiency in SRD2 for simplified $(\tilde{t},\tilde{\chi^{0}_1})$ model. Please mind that the efficiency in the table is reported in % and the results are given here in the $\it{m}_{\tilde{t}}-\it{m}_{\tilde{\chi}^{0}_{1}}$ plane as opposed to the $\it{m}_{\tilde{t}}-\Delta(\it{m}_{\tilde{\chi}^{0}_{1}},\it{m}_{\tilde{t}})$ one showed in the paper plot.
A search for supersymmetric partners of gluons and quarks is presented, involving signatures with jets and either two isolated leptons (electrons or muons) with the same electric charge, or at least three isolated leptons. A data sample of proton-proton collisions at $\sqrt{s}$ = 13 TeV recorded with the ATLAS detector at the Large Hadron Collider between 2015 and 2018, corresponding to a total integrated luminosity of 139 fb$^{-1}$, is used for the search. No significant excess over the Standard Model expectation is observed. The results are interpreted in simplified supersymmetric models featuring both R-parity conservation and R-parity violation, raising the exclusion limits beyond those of previous ATLAS searches to 1600 GeV for gluino masses and 750 GeV for bottom and top squark masses in these scenarios.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g \to q \bar{q}^{'} \tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm \to W^\pm \tilde{\chi}_2^0$ and $ \tilde{\chi}_2^0 \to Z \tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in signal region Rpc2L0b on the gluino and lightest neutralino masses in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Expected 95% CL exclusion contours in signal region Rpv2L on the gluino and lightest top squark masses in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Expected 95% CL exclusion contours in the best combination of signal regions of Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L0b, in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde \chi_1^\pm)$ = 1200 GeV, $m(\tilde \chi_2^0)$ = 1000 GeV and $m(\tilde \chi_1^0)$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L1b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 850 GeV, $m(\tilde \chi_1^\pm)$ = 500 GeV and $m(\tilde \chi_1^0)$ = 400 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc2L2b, in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$. The masses of the superpartners involved in the process are set to $m(\tilde{b}^{}_1)$ = 900 GeV, $m(\tilde \chi_1^\pm)$ = 150 GeV and $m(\tilde \chi_1^0)$ = 50 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpc3LSS1b, in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate. The masses of the superpartners involved in the process are set to $m(\tilde{t}^{}_1)$ = 800 GeV, $m(\tilde \chi_2^0)$ = 625 GeV, $m(\tilde \chi_1^\pm)\approx m(\tilde \chi_1^0)$ = 525 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region Rpv2L, in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$. The masses of the superpartners involved in the process are set to $m(\tilde g)$ = 1600 GeV, $m(\tilde{t}^{}_{1})$ = 800 GeV. Only statistical uncertainties are shown.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal acceptance for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L0b signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L1b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpc2L2b signal region with sensitivity to $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpv2L signal region with sensitivity to $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Signal efficiency for Rpc3LSS1b signal region with sensitivity to $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into the lightest neutralino via a two-steps cascade, $\tilde g\to q\bar{q}^{'}\tilde{\chi}_1^\pm$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_2^0$ and $\tilde{\chi}_2^0\to Z\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde g\tilde g$ production cross-sections in a SUSY scenario where gluinos are produced in pairs and decay into a top quark and an top squark, which in turn decays via non-zero baryon-number-violating RPV couplings $\lambda^{''}_{313}$, $\tilde g\to t\tilde{t}_1$ followed by $\tilde{t}_1\to b d$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{b}^{}_1\tilde{b}^{*}_1$ production cross-sections in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Observed 95% CL upper limit on $pp\to \tilde{t}^{}_\mathrm{1}\tilde{t}^{*}_\mathrm{1}$ production cross-sections in a SUSY scenario where pairs of top-antitop squarks are produced and decay into the lightest neutralino via a two-steps cascade, $\tilde t^{}_{1}\to t\tilde{\chi}_2^0$ followed by $\tilde{\chi}_2^0\to \tilde{\chi}_1^\pm W^\mp$ and $\tilde{\chi}_1^\pm\to f\bar{f^{'}}\tilde{\chi}_1^0$. The lightest chargino and the lightest neutralino are assumed to be nearly mass-degenerate.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
Best observed 95% CL exclusion contours selected from Rpc2L1b and Rpc2L2b on the lightest bottom squark and lightest neutralino masses in a SUSY scenario where pairs of bottom-antibottom squarks are produced and decay into the lightest neutralino via a chargino, $\tilde b^{}_{1}\to t\tilde{\chi}_1^-$ followed by $\tilde{\chi}_1^\pm\to W^\pm\tilde{\chi}_1^0$.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L0b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}} / m_{\mathrm{eff}}$ of observed data and expected background towards Rpc2L1b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $E_{\mathrm{T}}^{\mathrm{miss}}$ of observed data and expected background towards Rpc2L2b from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
N-1 distributions for $m_{\mathrm{eff}}$ of observed data and expected background towards Rpv2L from publication's Figure 5 . The last bin is inclusive.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But, sometimes you may wish to be more specific. Here we show you how.
Guidance and examples on the query string syntax can be found in the Elasticsearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status Email Forum Twitter GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.