Exclusion limits on higgsino pair production divided by the theory cross-section.The results of the low-mass analysis are used below m(higgsino) = 300 GeV, while those of the high-mass analysis are used above. The figure shows the observed and expected 95% upper limits on the higgsino pair production cross-section as a function of m(higgsino).

Observed and expected 95% limits in the m(higgsino) vs BR(higgsino to higgs+gravitino) plane. The regions above the lines are excluded by the analyses.

The observed and expected 95% upper limits on the total pair production cross section for degenerate higgsinos as a function of m(higgsino) for the high-mass search. Only the high-mass analysis results are used in this figure.

The observed and expected 95% upper limits on the total pair production cross section for degenerate higgsinos as a function of m(higgsino) for the high-mass search, divided by the theory cross section. Only the high-mass analysis results are used in this figure.

The observed and expected 95% upper limits on the total pair production cross section for degenerate higgsinos as a function of m(higgsino) for the low-mass search. Only the low-mass analysis results are used in this figure.

The observed and expected 95% upper limits on the total pair production cross section for degenerate higgsinos as a function of m(higgsino) for the low-mass search, divided by the theory cross section. Only the low-mass analysis results are used in this figure.

Particle-level acceptance for the low-mass discovery signal regions low-SR-MET0-meff440 and low-SR-MET150-meff440, shown as a function of higgsino mass. The acceptance is defined as the fraction of signal events passing the particle-level event selection that emulates the detector-level selection. The acceptance calculation considers only those signal events where both higgsinos decay to Higgs bosons that subsequently both decay to b-quarks.

The experimental efficiency of the low-mass analysis, for the two discovery signal regions low-SR-MET0-meff440 and low-SR-MET150-meff440, as a function of higgsino mass. The experimental efficiency is defined as the number of events passing the detector-level event selection divided by the number of events passing the event selection for a perfect detector. The denominator is obtained by implementing particle-level event selection that emulate the detector-level selection. Such particle-level selection is not applied on the numerator.

Particle-level acceptance for the high-mass discovery signal regions SR-4b-meff1-A-disc and SR-3b-meff3-A, shown as a function of higgsino mass. The acceptance is defined as the fraction of signal events passing the particle-level event selection that emulates the detector-level selection. The acceptance calculation considers only those signal events where both higgsinos decay to Higgs bosons that subsequently both decay to b-quarks.

The experimental efficiency of the high-mass analysis, for the two discovery signal regions SR-4b-meff1-A-disc and SR-3b-meff3-A, as a function of higgsino mass. The experimental efficiency is defined as the number of events passing the detector-level event selection divided by the number of events passing the event selection for a perfect detector. The denominator is obtained by implementing particle-level event selection that emulate the detector-level selection. Such particle-level selection is not applied on the numerator.

Example cutflow for SR-3b-meff3-A.

Example cutflow for SR-4b-meff1-A-disc.

Cutflow for low-mass analysis for each signal mass point.

Expected and observed 95% CL lower limits on the leptoquark mass as a function of the branching ratio $\mathcal{B}$(LQ->$t\mu$).

Expected exclusion limits at 95% CL from Fig 7(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Observed exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Expected exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Observed exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Expected exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Observed exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$

Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$

Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$

Expected exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$

One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$

Observed exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Expected exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Observed exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Positive one $\sigma$ observed exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Negative one $\sigma$ observed exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Expected exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

One $\sigma$ band of expected exclusion limits at 95% CL from Fig 7(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

N-1 distribution for $m_{\mathrm{eff}}$of observed data and expected background in SRGGWZ-H.

N-1 distribution for $E_{\mathrm{T}}^{\mathrm{miss}}$of observed data and expected background in SRGGSlep-M.

N-1 distribution for $\sum{p_{\mathrm{T}}^\mathrm{jet}}$of observed data and expected background in SRUDD-ge2b.

N-1 distribution for $m_{\mathrm{eff}}$of observed data and expected background in SRLQD.

N-1 distribution for $m_{\mathrm{eff}}$of observed data and expected background in SRSSWZ-H.

N-1 distribution for $m_{\mathrm{eff}}$of observed data and expected background in SRSSSlep-H(loose).

Signal acceptance for SRGGWZ-H signal region from Fig 10(c) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRGGWZ-H signal region from Fig 15(c) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRGGWZ-M signal region from Fig 10(b) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRGGWZ-M signal region from Fig 15(b) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRGGWZ-L signal region from Fig 10(a) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRGGWZ-L signal region from Fig 15(a) in a SUSY scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRGGSlep-L signal region from Fig 12(a) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRGGSlep-L signal region from Fig 17(a) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRGGSlep-M signal region from Fig 12(b) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRGGSlep-M signal region from Fig 17(b) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRGGSlep-H signal region from Fig 12(c) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRGGSlep-H signal region from Fig 17(c) in a SUSY scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRUDD-1b signal region from Fig 14(b) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Signal efficiency for SRUDD-1b signal region from Fig 19(b) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Signal acceptance for SRUDD-2b signal region from Fig 14(c) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Signal efficiency for SRUDD-2b signal region from Fig 19(c) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Signal acceptance for SRUDD-ge2b signal region from Fig 14(d) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Signal efficiency for SRUDD-ge2b signal region from Fig 19(d) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Signal acceptance for SRUDD-ge3b signal region from Fig 14(e) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Signal efficiency for SRUDD-ge3b signal region from Fig 19(e) in a SUSY scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Signal acceptance for SRLQD signal region from Fig 14(a) in a SUSY scenario where direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$

Signal efficiency for SRLQD signal region from Fig 19(a) in a SUSY scenario where direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$

Signal acceptance for SRSSWZ-L signal region from Fig 11(a) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRSSWZ-L signal region from Fig 16(a) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRSSWZ-ML signal region from Fig 11(b) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRSSWZ-ML signal region from Fig 16(b) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRSSWZ-MH signal region from Fig 11(c) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRSSWZ-MH signal region from Fig 16(c) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRSSWZ-H signal region from Fig 11(d) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRSSWZ-H signal region from Fig 16(d) in a SUSY scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRSSSlep-H signal region from Fig 13(d) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRSSSlep-H signal region from Fig 18(d) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRSSSlep-MH signal region from Fig 13(c) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRSSSlep-MH signal region from Fig 18(c) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRSSSlep-L signal region from Fig 13(a) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRSSSlep-L signal region from Fig 18(a) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRSSSlep-ML signal region from Fig 13(b) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRSSSlep-ML signal region from Fig 18(b) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal acceptance for SRSSSlep-H(loose) signal region from Fig 13(e) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Signal efficiency for SRSSSlep-H(loose) signal region from Fig 18(e) in a SUSY scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGWZ-H in a susy scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1400 GeV, $m(\tilde{\chi_{1}^{0}})$ = 1000 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGWZ-M in a susy scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1400 GeV, $m(\tilde{\chi_{1}^{0}})$ = 1000 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGWZ-L in a susy scenario where $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1400 GeV, $m(\tilde{\chi_{1}^{0}})$ = 1000 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGSlep-L in a susy scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 2000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 500 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGSlep-M in a susy scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 2000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 500 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRGGSlep-H in a susy scenario where $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 2000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 500 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRUDD-1b in a susy scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1600 GeV, $m(\tilde{t})$ = 600 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRUDD-2b in a susy scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1600 GeV, $m(\tilde{t})$ = 600 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRUDD-ge2b in a susy scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1600 GeV, $m(\tilde{t})$ = 600 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRUDD-ge3b in a susy scenario where $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 1600 GeV, $m(\tilde{t})$ = 600 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRLQD in a susy scenario where direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$. The masses of the superpartners involved in the process are set to $m(\tilde{g})$ = 2200 GeV, $m(\tilde{\chi_{1}^{0}})$ = 1870 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSWZ-L in a susy scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 800 GeV, $m(\tilde{\chi_{1}^{0}})$ = 600 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSWZ-ML in a susy scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 800 GeV, $m(\tilde{\chi_{1}^{0}})$ = 600 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSWZ-MH in a susy scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 800 GeV, $m(\tilde{\chi_{1}^{0}})$ = 600 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSWZ-H in a susy scenario where $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 800 GeV, $m(\tilde{\chi_{1}^{0}})$ = 600 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-H in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-MH in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-L in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-ML in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.

Number of signal events expected for 139 fb$^{-1}$ at different stages of the event selection for the signal region SRSSSlep-H(loose) in a susy scenario where $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$. The masses of the superpartners involved in the process are set to $m(\tilde{q})$ = 1000 GeV, $m(\tilde{\chi_{1}^{0}})$ = 800 GeV. Only statistical uncertainties are shown.

Cross-section upper limits at 95% CL from Fig1(a) for $\tilde{g}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Cross-section upper limits at 95% CL from Fig1(c) for $\tilde{g}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

Cross-section upper limits at 95% CL from Fig1(f) for $\tilde{g}$ decays into anti-top and $\tilde{t}$ and $\tilde{t}$ decays via a non-zero RPV coupling $\lambda''$

Cross-section upper limits at 95% CL from Fig1(e) for direct $\tilde{\chi_{1}^{0}}$ decay into SM leptons and quarks via a non-zero RPV coupling $\lambda'$

Cross-section upper limits at 95% CL from Fig1(b) for $\tilde{q}$ decays into SM gauge bosons and $\tilde{\chi}^{0}_{1}$

Cross-section upper limits at 95% CL from Fig1(d) for $\tilde{q}$ decays into sleptons and subsequently to SM leptons and $\tilde{\chi}^{0}_{1}$

The observed and expected 95% CL upper limits on the minimal coupling vector LQ pair production cross-sections assuming B = 1 as a function of m$_\text{LQ}$.

The observed and expected 95% CL upper limits on the Yang-Mills coupling vector LQ pair production cross-sections assuming B = 1 as a function of m$_\text{LQ}$.

The observed and expected 95% CL upper limits on the branching ratio into charged leptons as a function of m$_\text{LQ}$ for the scalar LQ.

The observed and expected 95% CL upper limits on the branching ratio into charged leptons as a function of m$_\text{LQ}$ for the vector LQ minimal coupling scenario.

The observed and expected 95% CL upper limits on the branching ratio into charged leptons as a function of m$_\text{LQ}$ for the vector LQ Yang-Mills coupling scenario.

Summary of the observed and expected 95% CL upper limits on the cross section for $\mathrm{LQ}_{3}^{\mathrm{d}}$ pair production as a function of $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$ under the assumptions of B=1.

Summary of the observed and expected 95% CL upper limits on B as a function of $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$.

Summary of the observed and expected 95% CL upper limits on B as a function of $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$.

Cutflow of the preselection requirements (see Section 5) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.

Cutflow of the preselection requirements (see Section 5) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.

Cutflow of the signal region requirements in 1$\ell+\geq 1\tau$ channel (see Table 3) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. Events that satisfy the preselection requirements are considered. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.

Cutflow of the signal region requirements in 1$\ell+\geq 1\tau$ channel (see Table 3) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. Events that satisfy the preselection requirements are considered. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.

Cutflow of the signal region requirements in the 2$\ell$OS+$\geq 1\tau$ channel (see Table 4) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. Events that satisfy the preselection requirements are considered. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.

Cutflow of the signal region requirements in the 2$\ell$OS+$\geq 1\tau$ channel (see Table 4) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. Events that satisfy the preselection requirements are considered. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.

Cutflow of the signal region requirements in the $2\ell$SS/$3\ell+\geq 1\tau$ channel (see Table 5) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. Events that satisfy the preselection requirements are considered. In this channel, two signal regions (SR-L and SR-H) are defined based on $p_{\mathrm{T}, 1}^{\tau}$, with SR-L and SR-H requiring $125< p_{\mathrm{T}, 1}^{\tau} < 225$ GeV and $p_{\mathrm{T}, 1}^{\tau}>225$ GeV, respectively. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.

Cutflow of the signal region requirements in the $2\ell$SS/$3\ell+\geq 1\tau$ channel (see Table 5) for $\mathrm{LQ}_{3}^{\mathrm{d}}$ signals with $m_{\mathrm{LQ}_{3}^{\mathrm{d}}}$=0.9, 1.1, and 1.3 TeV, assuming B=1. Events that satisfy the preselection requirements are considered. In this channel, two signal regions (SR-L and SR-H) are defined based on $p_{\mathrm{T}, 1}^{\tau}$, with SR-L and SR-H requiring $125< p_{\mathrm{T}, 1}^{\tau} < 225$ GeV and $p_{\mathrm{T}, 1}^{\tau}>225$ GeV, respectively. The yields correspond to an integrated luminosity of 139 fb$^{-1}$.

Expected 95% CL lower limit on the VLQ $T$ mass as a function of the decay branching ratios into $W b$ and $Ht$.

Observed 95% CL lower limit on the VLQ $T$ mass as a function of the decay branching ratios into $W b$ and $Ht$.

Comparison of the distribution of the scalar sum of small-$R$ jet and lepton transverse momenta, $S_T$, between data and the background prediction in the signal region of the pair-production (PP) $\geq 3\ell$ channel. The background prediction is shown post-fit, i.e. after the fit to the data $S_T$ distributions under the background-only hypothesis. The last bin contains the overflow. An example distribution for a $B\bar B$ signal in the singlet model with $m_B$ = 900 GeV is overlaid.

Comparison of the distribution of the invariant mass of the $Z$ boson candidate and the highest-$p_T$ top-tagged large-$R$ jet, $m_{Zt}$, between data and the background prediction in the signal region of the single-production (SP) 2$\ell$ channel. The background prediction is shown post-fit, i.e. after the fit to the data $m_{Zt}$ distributions under the background-only hypothesis. The last bin contains the overflow. An example distribution for a single-$T$-quark signal with $m_T$ = 900 GeV and $\kappa_T = 0.5$ is overlaid.

Comparison of the distribution of the scalar sum of small-$R$ jet and lepton transverse momenta, $S_T$, between data and the background prediction in the signal region of the single-production (SP) $\geq 3\ell$ channel. The background prediction is shown post-fit, i.e. after the fit to the data $S_T$ distributions under the background-only hypothesis. The last bin contains the overflow. An example distribution for a single-$T$-quark signal with $m_T$ = 900 GeV and $\kappa_T$ = 0.5 is overlaid.

Upper limits at 95$\%$ CL on the cross section of vector-like quark pair production (PP) for $T\bar T$ in the singlet model. The expected limits are shown for the combination of the channels, as are the observed limits.

Upper limits at 95$\%$ CL on the cross section of vector-like quark pair production (PP) for $B\bar B$ in the singlet model. The expected limits are shown for the combination of the channels, as are the observed limits.

Upper limits at 95$\%$ CL on the cross section of vector-like quark pair production (PP) for $T\bar T$ in the doublet model. The expected limits are shown for the combination of the channels, as are the observed limits.

Upper limits at 95$\%$ CL on the cross section of vector-like quark pair production (PP) for $B\bar B$ in the doublet model. The expected limits are shown for the combination of the channels, as are the observed limits.

Upper limits at 95$\%$ CL on the cross section of vector-like quark pair production (PP) for $T\bar T$ with a BR of 100$\%$ to $Zt$. The expected limits are shown for the combination of the channels, as are the observed limits.

Upper limits at 95$\%$ CL on the cross section of vector-like quark pair production (PP) for $B\bar B$ with a BR of 100$\%$ to $Zb$. The expected limits are shown for the combination of the channels, as are the observed limits.

Expected 95$\%$ CL lower limits from the combination of the pair-production channels on the mass of vector-like quarks for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$, adding up to unity.

Observed 95$\%$ CL lower limits from the combination of the pair-production channels on the mass of vector-like quarks for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$, adding up to unity.

Expected 95$\%$ CL lower limits from the combination of the pair-production channels on the mass of vector-like quarks for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$, adding up to unity.

Observed 95$\%$ CL lower limits from the combination of the pair-production channels on the mass of vector-like quarks for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$, adding up to unity.

Upper limits at 95$\%$ CL on the cross section times BR to $Zt$ of single production (SP) of a $T$-quark. The expected limits are shown for the combination of the channels, as are the observed limits. The expected cross section times BR to $Zt$ for single-$T$-quark production is also shown for a coupling $\kappa_T = 0.5$, which corresponds to a coupling of $c_W = \sqrt{c^2_{W,L} + c^2_{W,R}} = 0.45$ from Ref. [14]. The BR assumed here corresponds to the singlet benchmark model, i.e. $\approx 25\%$.

Expected and observed 95$\%$ CL limits from the combination of the single-production channels on the coupling of the $T$ quark to SM particles, $c_W = \sqrt c^2_L + c^2_R$, assuming the singlet-model BR of $\approx 25\%$, as a function of the mass of the $T$ quark, $m_T$. Values of $c_W$ larger than the observed limit are excluded.

Expected and observed 95$\%$ CL limits from the combination of the single-production channels on the mixing angle in the singlet model between the $T$ quark and the top quark, $|\sin\theta_L|$, as a function of the mass of the $T$ quark, $m_T$. Values of $|\sin\theta_L|$ enclosed by the observed limit are excluded, i.e. for $m_T$ larger than $\approx 1200$ GeV, no value of $|\sin\theta_L|$ is excluded.

Expected lower limit from the combination of the single-production channels on the mass of the $T$ quark as a function of the couplings of the $T$ quark to the $W$ boson, $\sqrt c^2_L + c^2_R$, and to the $Z$ boson, $\sqrt c^2_L + c^2_R$ with the assumption of equal BRs for $T\rightarrow Zt$ and $T\rightarrow Ht$ in the limit of large $T$-quark masses.

Observed lower limit from the combination of the single-production channels on the mass of the $T$ quark as a function of the couplings of the $T$ quark to the $W$ boson, $\sqrt c^2_L + c^2_R$, and to the $Z$ boson, $\sqrt c^2_L + c^2_R$ with the assumption of equal BRs for $T\rightarrow Zt$ and $T\rightarrow Ht$ in the limit of large $T$-quark masses.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 500 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 600 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 700 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 750 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 800 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 850 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 900 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 950 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 1000 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 1050 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 1100 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 1150 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 1200 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 1300 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow T\bar T)$ for the combination of the pair-production channels for all combinations of BRs for $T\rightarrow Zt$, $T\rightarrow Ht$, $T\rightarrow Wb$ adding up to unity for a $T$-quark mass of 1400 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 500 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 600 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 700 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 750 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 800 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 850 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 900 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 950 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 1000 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 1050 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 1100 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 1150 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 1200 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 1300 GeV.

Observed upper limits at 95$\%$ CL on $\sigma(pp\rightarrow B\bar B)$ for the combination of the pair-production channels for all combinations of BRs for $B\rightarrow Zb$, $B\rightarrow Hb$, $B\rightarrow Wt$ adding up to unity for a $B$-quark mass of 1400 GeV.

Observed upper limits at 95$\%$ CL on the cross section times BR to $Zt$ as a function of the vector-like $T$-quark mass and coupling $\kappa_T$ for the combination of the SP $2\ell$ and SP $\geq 3\ell$ channels.

Signal cutflows for the $B\bar B$ process in the singlet model in the PP $2\ell$ $0-1$J channel in the 0-large-$R$ jet SR. Only statistical uncertainties are shown.

Signal cutflows for the $B\bar B$ process in the singlet model in the PP $2\ell$ $0-1$J channel in the 1-large-$R$ jet SR. Only statistical uncertainties are shown.

Signal cutflows for the $B\bar B$ process in the doublet model in the PP $2\ell$ $0-1$J channel in the 0-large-$R$ jet SR. Only statistical uncertainties are shown.

Signal cutflows for the $B\bar B$ process in the doublet model in the PP $2\ell$ $0-1$J channel in the 1-large-$R$ jet SR. Only statistical uncertainties are shown.

Signal cutflows for the $B\bar B$ process in the case of 100$\%$ BR for $B \rightarrow Zb$ in the PP $2\ell$ $0-1$J channel in the 0-large-$R$ jet SR. Only statistical uncertainties are shown.

Signal cutflows for the $B\bar B$ process in the case of 100$\%$ BR for $B \rightarrow Zb$ in the PP $2\ell$ $0-1$J channel in the 1-large-$R$ jet SR. Only statistical uncertainties are shown.

Signal cutflows for the $T\bar T$ process in the singlet model in the PP $2\ell$ $0-1$J channel in the 0-large-$R$ jet SR. Only statistical uncertainties are shown.

Signal cutflows for the $T\bar T$ process in the singlet model in the PP $2\ell$ $0-1$J channel in the 1-large-$R$ jet SR. Only statistical uncertainties are shown.

Signal cutflows for the $T\bar T$ process in the doublet model in the PP $2\ell$ $0-1$J channel in the 0-large-$R$ jet SR. Only statistical uncertainties are shown.

Signal cutflows for the $T\bar T$ process in the doublet model in the PP $2\ell$ $0-1$J channel in the 1-large-$R$ jet SR. Only statistical uncertainties are shown.

Signal cutflows for the $T\bar T$ process in the case of 100$\%$ BR for $T \rightarrow Zt$ in the PP $2\ell$ $0-1$J channel in the 0-large-$R$ jet SR. Only statistical uncertainties are shown.

Signal cutflows for the $T\bar T$ process in the case of 100$\%$ BR for $T \rightarrow Zt$ in the PP $2\ell$ $0-1$J channel in the 1-large-$R$ jet SR. Only statistical uncertainties are shown.

Signal cutflows for the $T\bar T$ process in the singlet model in the PP $2\ell$ $\geq 2$J channel. Only statistical uncertainties are shown.

Signal cutflows for the $B\bar B$ process in the singlet model in the PP $2\ell$ $\geq 2$J channel. Only statistical uncertainties are shown.

Signal cutflows for the $T\bar T$ process in the doublet model in the PP $2\ell$ $\geq 2$J channel. Only statistical uncertainties are shown.

Signal cutflows for the $B\bar B$ process in the doublet model in the PP $2\ell$ $\geq 2$J channel. Only statistical uncertainties are shown.

Signal cutflows for the $T\bar T$ process in the case of 100$\%$ BR for $T \rightarrow Zt$ in the PP $2\ell$ $\geq 2$J channel. Only statistical uncertainties are shown.

Signal cutflows for the $B\bar B$ process in the case of 100$\%$ BR for $B \rightarrow Zb$ in the PP $2\ell$ $\geq 2$J channel. Only statistical uncertainties are shown.

Signal cutflows for the $T\bar T$ process in the singlet model in the PP $\geq 3\ell$ channel. Only statistical uncertainties are shown.

Signal cutflows for the $B\bar B$ process in the singlet model in the PP $\geq 3\ell$ channel. Only statistical uncertainties are shown.

Signal cutflows for the $T\bar T$ process in the doublet model in the PP $\geq 3\ell$ channel. Only statistical uncertainties are shown.

Signal cutflows for the $B\bar B$ process in the doublet model in the PP $\geq 3\ell$ channel. Only statistical uncertainties are shown.

Signal cutflows for the $T\bar T$ process in the case of 100$\%$ BR for $T \rightarrow Zt$ in the PP $\geq 3\ell$ channel. Only statistical uncertainties are shown.

Signal cutflows for the $B\bar B$ process in the case of 100$\%$ BR for $B \rightarrow Zb$ in the PP $\geq 3\ell$ channel. Only statistical uncertainties are shown.

Signal cutflows for single-$T$-quark production with $\kappa_T = 0.5$ in the SP $2\ell$ channel. Only statistical uncertainties are shown.

Signal cutflows for single-$T$-quark production with $\kappa_T = 0.5$ in the SP $\geq 3\ell$ channel. Only statistical uncertainties are shown.

Signal efficiencies in $\%$ in the PP $2\ell$ $0-1$J channel in the 0-large-$R$ jet SR. Uncertainties are statistical only.

Signal efficiencies in $\%$ in the PP $2\ell$ $0-1$J channel in the 1-large-$R$ jet SR. Uncertainties are statistical only.

Signal efficiencies in $\%$ in the PP $2\ell$ $\geq 2$J channel. Uncertainties are statistical only.

Signal efficiencies in $\%$ in the PP $\geq 3\ell$ channel. Uncertainties are statistical only.

Signal efficiencies in $\%$ in the SP $2\ell$ channel for $\kappa_T = 0.5$. Uncertainties are statistical only.

Signal efficiencies in $\%$ in the SP $\geq 3\ell$ channel for $\kappa_T = 0.5$. Uncertainties are statistical only.

Distribution of the diphoton invariant mass in validation region VR2. The solid histograms are stacked to show the SM expectations after the 2&times;2D background estimation technique is applied. Background and signal predictions are normalised to the luminosity. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb&#772;h, all subdominant in this signature. Statistical and systematic uncertainties are indicated by the shaded area. The lower panel of each plot shows the ratio of the data to the SM prediction for the respective bin. The first and last bins include the underflows and overflows respectively.

Distribution of the missing transverse momentum in validation region VR2. The solid histograms are stacked to show the SM expectations after the 2&times;2D background estimation technique is applied. Background and signal predictions are normalised to the luminosity. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb&#772;h, all subdominant in this signature. Statistical and systematic uncertainties are indicated by the shaded area. The lower panel of each plot shows the ratio of the data to the SM prediction for the respective bin. The first and last bins include the underflows and overflows respectively.

Distribution of the diphoton invariant mass with all selections of the signal regions applied, except on m_{&gamma;&gamma;} itself, for signal region SR1h. The background estimation techniques described in the text are applied. The different backgrounds are stacked to add up to the total SM prediction in each bin. The predicted yields for signal benchmark models of varying &chi;&#771;⁰₁ mass are also overlaid (not stacked) assuming B(&chi;&#771;⁰₁ &rarr; hG&#771; ) to equal 100%. Background and signal predictions are normalised to the luminosity. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb&#772;h, all subdominant in this signature. The sizes of the statistical and systematic uncertainties are indicated by the shaded areas. The lower panels show the ratio of the data to the SM prediction. Arrows indicate the borders of the signal region (|m_{&gamma;&gamma;}-125 GeV|&lt;5 GeV). The first and last bins include the underflows and overflows respectively.

Distribution of the diphoton invariant mass with all selections of the signal regions applied, except on m_{&gamma;&gamma;} itself, for signal region SR1Z. The background estimation techniques described in the text are applied. The different backgrounds are stacked to add up to the total SM prediction in each bin. The predicted yields for signal benchmark models of varying &chi;&#771;⁰₁ mass are also overlaid (not stacked) assuming B(&chi;&#771;⁰₁ &rarr; hG&#771; ) to equal 50%. Background and signal predictions are normalised to the luminosity. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb&#772;h, all subdominant in this signature. The sizes of the statistical and systematic uncertainties are indicated by the shaded areas. The lower panels show the ratio of the data to the SM prediction. Arrows indicate the borders of the signal region (|m_{&gamma;&gamma;}-125 GeV|&lt;5 GeV). The first and last bins include the underflows and overflows respectively.

Distribution of the diphoton invariant mass with all selections of the signal regions applied, except on m_{&gamma;&gamma;} itself, for signal region SR2. The background estimation techniques described in the text are applied. The different backgrounds are stacked to add up to the total SM prediction in each bin. The predicted yields for signal benchmark models of varying &chi;&#771;⁰₁ mass are also overlaid (not stacked) assuming B(&chi;&#771;⁰₁ &rarr; hG&#771; ) to equal 100%. Background and signal predictions are normalised to the luminosity. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb&#772;h, all subdominant in this signature. The sizes of the statistical and systematic uncertainties are indicated by the shaded areas. The lower panels show the ratio of the data to the SM prediction. Arrows indicate the borders of the signal region (|m_{&gamma;&gamma;}-125 GeV|&lt;5 GeV). The first and last bins include the underflows and overflows respectively.

Observed and expected limits on the pure higgsino cross-section at 95% CL assuming B(&chi;&#771;⁰₁ &rarr; hG&#771; )=100% for different &chi;&#771;⁰₁ masses, obtained by a statistical combination of the three signal regions SR1h, SR1Z and SR2. The inner and outer bands indicate the 1&sigma; and 2&sigma; variation on the expected limit respectively.

Observed and expected 95% CL limits on the pure-higgsino branching fraction to B(&chi;&#771;⁰₁ &rarr; hG&#771; ) as a function of the higgsino mass m(&chi;&#771;⁰₁) assuming it decays via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;. Limits are obtained by performing a statistical combination of the three signal regions SR1h, SR1Z and SR2. The &plusmn; 1&sigma; variation on the expected limit is shown. The dotted lines indicate the observed limit obtained by a variation of theoretical prediction for the neutralino production cross-section by &plusmn;1 &sigma;. Values of B(&chi;&#771;⁰₁ &rarr; hG&#771; ) larger than the observed 95% CL limit are excluded, as indicated by the hatched area.

Observed and expected 95% CL limits on the pure-higgsino branching fraction to B(&chi;&#771;⁰₁ &rarr; hG&#771; ) as a function of the higgsino mass m(&chi;&#771;⁰₁) assuming it decays via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;. Limits are obtained by performing a statistical combination of the three signal regions SR1h, SR1Z and SR2. The &plusmn; 1&sigma; variation on the expected limit is shown. The dotted lines indicate the observed limit obtained by a variation of theoretical prediction for the neutralino production cross-section by &plusmn;1 &sigma;. Values of B(&chi;&#771;⁰₁ &rarr; hG&#771; ) larger than the observed 95% CL limit are excluded, as indicated by the hatched area.

Observed and expected 95% CL limits on the pure-higgsino branching fraction to B(&chi;&#771;⁰₁ &rarr; hG&#771; ) as a function of the higgsino mass m(&chi;&#771;⁰₁) assuming it decays via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;. Limits are obtained by performing a statistical combination of the three signal regions SR1h, SR1Z and SR2. The &plusmn; 1&sigma; variation on the expected limit is shown. The dotted lines indicate the observed limit obtained by a variation of theoretical prediction for the neutralino production cross-section by &plusmn;1 &sigma;. Values of B(&chi;&#771;⁰₁ &rarr; hG&#771; ) larger than the observed 95% CL limit are excluded, as indicated by the hatched area.

Observed and expected 95% CL limits on the pure-higgsino branching fraction to B(&chi;&#771;⁰₁ &rarr; hG&#771; ) as a function of the higgsino mass m(&chi;&#771;⁰₁) assuming it decays via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;. Limits are obtained by performing a statistical combination of the three signal regions SR1h, SR1Z and SR2. The &plusmn; 1&sigma; variation on the expected limit is shown. The dotted lines indicate the observed limit obtained by a variation of theoretical prediction for the neutralino production cross-section by &plusmn;1 &sigma;. Values of B(&chi;&#771;⁰₁ &rarr; hG&#771; ) larger than the observed 95% CL limit are excluded, as indicated by the hatched area.

Observed and expected 95% CL limits on the pure-higgsino branching fraction to B(&chi;&#771;⁰₁ &rarr; hG&#771; ) as a function of the higgsino mass m(&chi;&#771;⁰₁) assuming it decays via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;. Limits are obtained by performing a statistical combination of the three signal regions SR1h, SR1Z and SR2. The &plusmn; 1&sigma; variation on the expected limit is shown. The dotted lines indicate the observed limit obtained by a variation of theoretical prediction for the neutralino production cross-section by &plusmn;1 &sigma;. Values of B(&chi;&#771;⁰₁ &rarr; hG&#771; ) larger than the observed 95% CL limit are excluded, as indicated by the hatched area.

Observed and expected 95% CL limits on the pure-higgsino branching fraction to B(&chi;&#771;⁰₁ &rarr; hG&#771; ) as a function of the higgsino mass m(&chi;&#771;⁰₁) assuming it decays via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;. Limits are obtained by performing a statistical combination of the three signal regions SR1h, SR1Z and SR2. The &plusmn; 1&sigma; variation on the expected limit is shown. The dotted lines indicate the observed limit obtained by a variation of theoretical prediction for the neutralino production cross-section by &plusmn;1 &sigma;. Values of B(&chi;&#771;⁰₁ &rarr; hG&#771; ) larger than the observed 95% CL limit are excluded, as indicated by the hatched area.

Numbers of signal and background events in the signal regions. The respective background estimation techniques are applied. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb&#772;h, all subdominant in this signature. The different backgrounds are stacked to add up to the total Standard Model prediction in each bin. The predicted yields for signal benchmark models of varying &chi;&#771;⁰₁ mass are also plotted (not stacked), assuming B(&chi;&#771;⁰₁ &rarr; hG&#771; )=100% and a &chi;&#771;⁰₁ mass of 130 or 200 GeV. The statistical and systematic uncertainties are indicated by the shaded areas in the top plot. The bottom panel shows the statistical significance&nbsp;<a href="https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PUBNOTES/ATL-PHYS-PUB-2020-025/">[Ref]</a> of the difference between the SM prediction and the observed data in each region.

Observed 95% CL limits in pb on the pure higgsino cross-section, shown in the m(&chi;&#771;⁰₁)-B(&chi;&#771;⁰₁ &rarr; hG&#771; ) plane. Limits are obtained by a statistical combination of the three signal regions SR1h, SR1Z and SR2, assuming the neutralino to decay via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;.

Acceptances for all signal model points considered in the analysis, shown in the m(&chi;&#771;⁰₁)-B(&chi;&#771;⁰₁ &rarr; hG&#771; ) plane. Acceptances are provided separately for signal region SR1h, assuming the neutralino to decay via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;.

Acceptances for all signal model points considered in the analysis, shown in the m(&chi;&#771;⁰₁)-B(&chi;&#771;⁰₁ &rarr; hG&#771; ) plane. Acceptances are provided separately for signal region SR1Z, assuming the neutralino to decay via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;.

Acceptances for all signal model points considered in the analysis, shown in the m(&chi;&#771;⁰₁)-B(&chi;&#771;⁰₁ &rarr; hG&#771; ) plane. Acceptances are provided separately for signal region SR2, assuming the neutralino to decay via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;.

Efficiencies for all signal model points considered in the analysis, shown in the m(&chi;&#771;⁰₁)-B(&chi;&#771;⁰₁ &rarr; hG&#771; ) plane. Efficiencies are provided separately for signal region SR1h, assuming the neutralino to decay via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;.

Efficiencies for all signal model points considered in the analysis, shown in the m(&chi;&#771;⁰₁)-B(&chi;&#771;⁰₁ &rarr; hG&#771; ) plane. Efficiencies are provided separately for signal region SR1Z, assuming the neutralino to decay via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;.

Efficiencies for all signal model points considered in the analysis, shown in the m(&chi;&#771;⁰₁)-B(&chi;&#771;⁰₁ &rarr; hG&#771; ) plane. Efficiencies are provided separately for signal region SR2, assuming the neutralino to decay via either &chi;&#771;⁰₁&rarr; hG&#771; or &chi;&#771;⁰₁&rarr; ZG&#771;.

Observed and expected numbers of events in the three signal regions. The background category "h (other)" includes events originating from VBF, Vh, ggF, thq, thW and bb&#772;h, all subdominant in this signature. The table also includes model-independent 95% CL upper limits on the visible number of BSM events (S⁹⁵_obs), the number of BSM events given the expected number of background events (S⁹⁵_exp) and the visible BSM cross-section (&lang;&epsilon; &sigma;&rang;_obs⁹⁵), all calculated from pseudo-experiments. The discovery p-value (p₀) is also shown and its value is capped at 0.5 if the observed number of events is below the expected number of events.

Cutflows of two benchmark signal points assuming B(&chi;&#771;⁰₁ &rarr; hG&#771; )=100% for all three discovery signal regions. The initial selection includes the leptons veto. Only statistical uncertainties are included. Expected yields are normalised to a luminosity of 139 fb^-1.

Observed 95% CL limits on the production cross-section for scalar up-type LQs decaying into a top quark and a neutrino or a bottom quark and an electron.

Expected 95% CL limits on the production cross-section for scalar up-type LQs decaying into a top quark and a neutrino or a bottom quark and an electron.

Observed 95% CL limits on the production cross-section for scalar down-type LQs decaying into a bottom quark and a neutrino or a top quark and a muon.

Expected 95% CL limits on the production cross-section for scalar down-type LQs decaying into a bottom quark and a neutrino or a top quark and a muon.

Observed 95% CL limits on the production cross-section for scalar down-type LQs decaying into a bottom quark and a neutrino or a top quark and an electron.

Expected 95% CL limits on the production cross-section for scalar down-type LQs decaying into a bottom quark and a neutrino or a top quark and an electron.

Observed 95% CL limits on the production cross-section for vector up-type LQs in the Yang-Mills coupling scenario decaying into a top quark and a neutrino or a bottom quark and a muon.

Expected 95% CL limits on the production cross-section for vector up-type LQs in the Yang-Mills coupling scenario decaying into a top quark and a neutrino or a bottom quark and a muon.

Observed 95% CL limits on the production cross-section for vector up-type LQs in the Yang-Mills coupling scenario decaying into a top quark and a neutrino or a bottom quark and an electron.

Expected 95% CL limits on the production cross-section for vector up-type LQs in the Yang-Mills coupling scenario decaying into a top quark and a neutrino or a bottom quark and an electron.

Observed 95% CL limits on the production cross-section for vector up-type LQs in the minimal coupling scenario decaying into a top quark and a neutrino or a bottom quark and a muon.

Expected 95% CL limits on the production cross-section for vector up-type LQs in the minimal coupling scenario decaying into a top quark and a neutrino or a bottom quark and a muon.

Observed 95% CL limits on the production cross-section for vector up-type LQs in the minimal coupling scenario decaying into a top quark and a neutrino or a bottom quark and an electron.

Expected 95% CL limits on the production cross-section for vector up-type LQs in the minimal coupling scenario decaying into a top quark and a neutrino or a bottom quark and an electron.

Product of signal acceptance and efficiency in the training region for scalar up-type LQs decaying into top quarks and neutrinos or bottom quarks and muons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(LQ_{mix}^u\rightarrow b\mu)$.

Product of signal acceptance and efficiency in the training region for scalar up-type LQs decaying into top quarks and neutrinos or bottom quarks and electrons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(LQ_{mix}^u\rightarrow be)$.

Product of signal acceptance and efficiency in the training region for scalar down-type LQs decaying into top quarks and muons or bottom quarks and neutrinos depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(LQ_{mix}^d\rightarrow t\mu)$.

Product of signal acceptance and efficiency in the training region for scalar down-type LQs decaying into top quarks and electrons or bottom quarks and neutrinos depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(LQ_{mix}^d\rightarrow te)$.

Product of signal acceptance and efficiency in the training region for vector LQs in the Yang-Mills coupling scenario decaying into top quarks and neutrinos or bottom quarks and muons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(vLQ_{mix}^{YM}\rightarrow b\mu)$.

Product of signal acceptance and efficiency in the training region for vector LQs in the Yang-Mills coupling scenario decaying into top quarks and neutrinos or bottom quarks and electrons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(vLQ_{mix}^{YM}\rightarrow be)$.

Product of signal acceptance and efficiency in the training region for vector LQs in the minimal coupling scenario decaying into top quarks and neutrinos or bottom quarks and muons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(vLQ_{mix}^{min}\rightarrow b\mu)$.

Product of signal acceptance and efficiency in the training region for vector LQs in the minimal coupling scenario decaying into top quarks and neutrinos or bottom quarks and electrons depending on the signal mass, $m_{LQ}$, and $\mathcal{B}(vLQ_{mix}^{min}\rightarrow be)$.

Cut-flow for the four models containing scalar LQs at a mass of $m_{LQ}=1300$ GeV and $\mathcal{B}(LQ_{mix}\rightarrow q_3\ell)=0.5$.

Cut-flow for the four models containing vector LQs at a mass of $m_{LQ}=1300$ GeV and $\mathcal{B}(LQ_{mix}\rightarrow q_3\ell)=0.5$.

The measured leading jet $p_T$ distribution in the $W \rightarrow \mu \nu$ control region, for the M1 selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured $E_T^{miss}$ distribution in the $W \rightarrow e \nu$ control region, for the M1 selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured leading jet $p_T$ distribution in the $W \rightarrow e \nu$ control region, for the M1 selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured $E_T^{miss}$ distribution in the $Z \rightarrow \mu \mu$ control region, for the M1 selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured leading jet $p_T$ distribution in the $Z \rightarrow \mu \mu$ control region, for the M1 selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured $E_T^{miss}$ distribution in the $W\rightarrow \mu \nu$ control region, for the c-tagged selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured leading jet $p_T$ distribution in the $W\rightarrow \mu \nu$ control region, for the c-tagged selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured $E_T^{miss}$ distribution in the $W\rightarrow e \nu$ control region, for the c-tagged selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured leading jet $p_T$ distribution in the $W\rightarrow e \nu$ control region, for the c-tagged selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured $E_T^{miss}$ distribution in the $Z\rightarrow ll$ control region, for the c-tagged selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured leading jet $p_T$ distribution in the $Z\rightarrow ll$ control region, for the c-tagged selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured $E_T^{miss}$ distribution in the t-(anti)-t control region, for the c-tagged selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured leading jet $p_T$ distribution in the t-(anti)-t control region, for the c-tagged selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

Measured leading jet $p_T$ distribution for the V3 selections compared to the SM predictions.

Measured $E_T^{miss}$ distribution for the V4 selections compared to the SM predictions.

Measured leading jet $p_T$ distribution for the V5 selections compared to the SM predictions.

Measured $E_T^{miss}$ distribution for the V5 selections compared to the SM predictions.

Measured $E_T^{miss}$ distribution for the M1 selection compared to the SM predictions. For illustration purposes, the distribution of two different SUSY scenarios are included.

Measured leading jet $p_T$ distribution for the M1 selection compared to the SM predictions. For illustration purposes, the distribution of two different SUSY scenarios are included.

Measured $E_T^{miss}$ distribution for the M2 selection compared to the SM predictions. For illustration purposes, the distribution of two different SUSY scenarios are included.

Measured leading jet $p_T$ distribution for the M2 selection compared to the SM predictions. For illustration purposes, the distribution of two different SUSY scenarios are included.

Measured $E_T^{miss}$ distribution for the M3 selection compared to the SM predictions. For illustration purposes, the distribution of two different SUSY scenarios are included.

Measured leading jet $p_T$ distribution for the M3 selection compared to the SM predictions. For illustration purposes, the distribution of two different SUSY scenarios are included.

Measured $E_T^{miss}$ distribution for the C1 selection before the cut in the variable shown is applied. The data are compared to the SM predictions. For illustration purposes, the distribution of two different SUSY scenarios are included.

Measured leading jet $p_T$ distribution for the C1 selection before the cut in the variable shown is applied. The data are compared to the SM predictions. For illustration purposes, the distribution of two different SUSY scenarios are included.

Measured leading jet $p_T$ for the C2 selection. The data are compared to the SM predictions. For illustration purposes, the distribution of two different SUSY scenarios are included.

Measured jet multiplicity for the C2 selection. The data are compared to the SM predictions. For illustration purposes, the distribution of two different SUSY scenarios are included.

The measured $W$ transverse mass distribution in the $W \rightarrow \mu \nu$ control region for the M1 monojet-like selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured $W$ transverse mass distribution in the $W \rightarrow e \nu$ control region for the M1 monojet-like selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured dimuon invariant mass distribution in the $Z \rightarrow \mu \mu$ control region for the M1 monojet-like selection, compared to the background predictions. The latter include the global normalization factors extracted from the fit.

The measured $E_T^{miss}$ distribution in a multijet control sample for the monojet-like analysis. This region is defined with similar $E_T^{miss}$ and leading jet $p_T$ cuts as M1, but releasing the jet-veto and inverting the $\Delta \phi (jet, p_T^{miss})$ cut, now requiring it to be less than 0.4. The data are compared to predictions.

Measured jet multiplicity in the $W \rightarrow e \nu$ control region for the c-tagged analysis, compared to background predictions. The latter include the global normalization factors extracted from the fit.

Measured jet multiplicity in the $W \rightarrow \mu \nu$ control region for the c-tagged analysis, compared to background predictions. The latter include the global normalization factors extracted from the fit.

Measured jet multiplicity in the $Z \rightarrow ll$ control region for the c-tagged analysis, compared to background predictions. The latter include the global normalization factors extracted from the fit.

Measured jet multiplicity in the t-(anti)-t control region for the c-tagged analysis, compared to background predictions. The latter include the global normalization factors extracted from the fit.

Measured dilepton invariant mass in the $Z \rightarrow ll$ control region for the c-tagged analysis. The predictions include the global normalization factors extracted from the fit.

Measured jet multiplicity distribution for the M1 selection compared to the SM predictions. For illustration purposes, the impact of two different SUSY scenarios are included.

Measured leading jet $\eta$ distribution for the M1 selection compared to the SM predictions. For illustration purposes, the impact of two different SUSY scenarios are included.

Measured $\Delta \phi (jet, p_T^{miss})$ distribution for the M1 selection compared to the SM predictions. For illustration purposes, the impact of two different SUSY scenarios are included.

Measured $E_T^{miss}$ distribution after preselection cuts compared to background predictions.

Measured jet multiplicity distribution in the C1 c-tagged selection compared to background predictions.

Multiplicity of jets with loose heavy-flavor tags in the C1 selection.

Multiplicity of jets with medium heavy-flavor tags in the C1 selection.

Expected and observed CLs, number of events, acceptance and efficiency for M1 SR for $\tilde{t}_1 \rightarrow c + \tilde{\chi}^0_1$. The expected event yield in 20.3 fb$^{-1}$, $N_{\text{events}}$, is used to calculate $\sigma\times A\times\varepsilon$ and $A\times\varepsilon$. The acceptance $A$ is defined as the percentage of events passing the selection at truth level, and the efficiency $\varepsilon$ is the ratio of events passing the selection at reconstructed level over the number of events passing the selection at truth level. The modified efficiency $\varepsilon\prime$ is the ratio of events passing the selection at truth and reconstructed level over the number of events passing the selection at truth level.

Expected and observed CLs, number of events, acceptance and efficiency for M2 SR for $\tilde{t}_1 \rightarrow c + \tilde{\chi}^0_1$. The expected event yield in 20.3 fb$^{-1}$, $N_{\text{events}}$, is used to calculate $\sigma\times A\times\varepsilon$ and $A\times\varepsilon$. The acceptance $A$ is defined as the percentage of events passing the selection at truth level, and the efficiency $\varepsilon$ is the ratio of events passing the selection at reconstructed level over the number of events passing the selection at truth level. The modified efficiency $\varepsilon\prime$ is the ratio of events passing the selection at truth and reconstructed level over the number of events passing the selection at truth level.

Expected and observed CLs, number of events, acceptance and efficiency for M3 SR for $\tilde{t}_1 \rightarrow c + \tilde{\chi}^0_1$. The expected event yield in 20.3 fb$^{-1}$, $N_{\text{events}}$, is used to calculate $\sigma\times A\times\varepsilon$ and $A\times\varepsilon$. The acceptance $A$ is defined as the percentage of events passing the selection at truth level, and the efficiency $\varepsilon$ is the ratio of events passing the selection at reconstructed level over the number of events passing the selection at truth level. The modified efficiency $\varepsilon\prime$ is the ratio of events passing the selection at truth and reconstructed level over the number of events passing the selection at truth level.

Expected and observed CLs, number of events, acceptance and efficiency for C1 SR for $\tilde{t}_1 \rightarrow c + \tilde{\chi}^0_1$. The expected event yield in 20.3 fb$^{-1}$, $N_{\text{events}}$, is used to calculate $\sigma\times A\times\varepsilon$ and $A\times\varepsilon$. The acceptance $A$ is defined as the percentage of events passing the selection at truth level, and the efficiency $\varepsilon$ is the ratio of events passing the selection at reconstructed level over the number of events passing the selection at truth level.

Expected and observed CLs, number of events, acceptance and efficiency for C2 SR for $\tilde{t}_1 \rightarrow c + \tilde{\chi}^0_1$. The expected event yield in 20.3 fb$^{-1}$, $N_{\text{events}}$, is used to calculate $\sigma\times A\times\varepsilon$ and $A\times\varepsilon$. The acceptance $A$ is defined as the percentage of events passing the selection at truth level, and the efficiency $\varepsilon$ is the ratio of events passing the selection at reconstructed level over the number of events passing the selection at truth level.

Expected and observed CLs, number of events, acceptance and efficiency for M1 SR for $\tilde{b}_1 \rightarrow b + \tilde{\chi}^0_1$. The expected event yield in 20.3 fb$^{-1}$, $N_{\text{events}}$, is used to calculate $\sigma\times A\times\varepsilon$ and $A\times\varepsilon$. The acceptance $A$ is defined as the percentage of events passing the selection at truth level, and the efficiency $\varepsilon$ is the ratio of events passing the selection at reconstructed level over the number of events passing the selection at truth level. The modified efficiency $\varepsilon\prime$ is the ratio of events passing the selection at truth and reconstructed level over the number of events passing the selection at truth level.

Expected and observed CLs, number of events, acceptance and efficiency for M2 SR for $\tilde{b}_1 \rightarrow b + \tilde{\chi}^0_1$. The expected event yield in 20.3 fb$^{-1}$, $N_{\text{events}}$, is used to calculate $\sigma\times A\times\varepsilon$ and $A\times\varepsilon$. The acceptance $A$ is defined as the percentage of events passing the selection at truth level, and the efficiency $\varepsilon$ is the ratio of events passing the selection at reconstructed level over the number of events passing the selection at truth level. The modified efficiency $\varepsilon\prime$ is the ratio of events passing the selection at truth and reconstructed level over the number of events passing the selection at truth level.

Expected and observed CLs, number of events, acceptance and efficiency for M3 SR for $\tilde{b}_1 \rightarrow b + \tilde{\chi}^0_1$. The expected event yield in 20.3 fb$^{-1}$, $N_{\text{events}}$, is used to calculate $\sigma\times A\times\varepsilon$ and $A\times\varepsilon$. The acceptance $A$ is defined as the percentage of events passing the selection at truth level, and the efficiency $\varepsilon$ is the ratio of events passing the selection at reconstructed level over the number of events passing the selection at truth level. The modified efficiency $\varepsilon\prime$ is the ratio of events passing the selection at truth and reconstructed level over the number of events passing the selection at truth level.

Expected and observed CLs, number of events, acceptance and efficiency for M1 SR for $\tilde{t}_1 \rightarrow b + ff' + \tilde{\chi}^0_1$. The expected event yield in 20.3 fb$^{-1}$, $N_{\text{events}}$, is used to calculate $\sigma\times A\times\varepsilon$ and $A\times\varepsilon$. The acceptance $A$ is defined as the percentage of events passing the selection at truth level, and the efficiency $\varepsilon$ is the ratio of events passing the selection at reconstructed level over the number of events passing the selection at truth level. The modified efficiency $\varepsilon\prime$ is the ratio of events passing the selection at truth and reconstructed level over the number of events passing the selection at truth level.

Expected and observed CLs, number of events, acceptance and efficiency for M2 SR for $\tilde{t}_1 \rightarrow b + ff' + \tilde{\chi}^0_1$. The expected event yield in 20.3 fb$^{-1}$, $N_{\text{events}}$, is used to calculate $\sigma\times A\times\varepsilon$ and $A\times\varepsilon$. The acceptance $A$ is defined as the percentage of events passing the selection at truth level, and the efficiency $\varepsilon$ is the ratio of events passing the selection at reconstructed level over the number of events passing the selection at truth level. The modified efficiency $\varepsilon\prime$ is the ratio of events passing the selection at truth and reconstructed level over the number of events passing the selection at truth level.

Expected and observed CLs, number of events, acceptance and efficiency for M3 SR for $\tilde{t}_1 \rightarrow b + ff' + \tilde{\chi}^0_1$. The expected event yield in 20.3 fb$^{-1}$, $N_{\text{events}}$, is used to calculate $\sigma\times A\times\varepsilon$ and $A\times\varepsilon$. The acceptance $A$ is defined as the percentage of events passing the selection at truth level, and the efficiency $\varepsilon$ is the ratio of events passing the selection at reconstructed level over the number of events passing the selection at truth level. The modified efficiency $\varepsilon\prime$ is the ratio of events passing the selection at truth and reconstructed level over the number of events passing the selection at truth level.