Correlation matrix for the differential branching fraction extraction between different $q^2$ bins in the simultaneous fit.

The product of acceptance and efficiency ($A\epsilon$) of the $\mathcal{B}(\mathrm{B}^+\to\mathrm{K}^+\mu^+\mu^-)$ channel, as a function of the muon pair $q^2$, as measured in simulated signal events, after all the corrections applied. In the figure, regions corresponding to resonances are displayed with red markers.

Same as Table 5, but for the bins containing the J$\psi$ and $\psi$(2S) resonances.

Integrated branching fraction $\mathcal{B}(\mathrm{B}^\pm \to \mathrm{K}^\pm\mu^+\mu^-)$ in the low-$q^2$ region.

Ratio of branching fractions $\mathcal{B}(\text{B}^\pm \to \text{K}^\pm\mu^+\mu^-)$ to $\mathcal{B}(\text{B}^\pm \to \text{K}^\pm\text{e}^+\text{e}^-)$, determined from the measured double ratio $R$(K) of these decays to the respective branching fractions of the decay chains $\text{B}^\pm\to\text{J/}\psi\text{K}^\pm$ with $\text{J/}\psi\to\mu^+\mu^-$ and $\text{e}^+\text{e}^-$.

Negative log likelihood function from the fit profiled as a function of the inverse ratio $R(\mathrm{K})^{-1}$.

Spectrum of ETmiss for the muon channel after the event selection. The spectrum is shown with the requirement MT > 252 GeV.

Spectrum of MT for the electron channel after the event selection.

Spectrum of MT for the muon channel after the event selection.

Observed and expected limits on SIGMA*B for WPRIME at 95% CL in the electron channel.

Observed and expected limits on SIGMA*B for W* at 95% CL in the electron channel.

Observed and expected limits on SIGMA*B for WPRIME at 95% CL in the muon channel.

Observed and expected limits on SIGMA*B for W* at 95% CL in the muon channel.

Observed and expected limits on SIGMA*B for WPRIME at 95% CL for the combination of the electron and muon channels.

Observed and expected limits on SIGMA*B for W* at 95% CL for the combination of the electron and muon channels.

Observed limits on M* as a function of the DM particle mass M(chi) at 90% CL for the combination of the electron and muon channel for various operators in the EFT.

Observed limits on the DM-nucleon scattering cross-section as a function of M(chi) at 90% CL for various operators in the EFT.

Observed limits on M* as a function of the DM particle mass M(chi) at 90% CL in the electron for various operators in the EFT.

Observed limits on M* as a function of the DM particle mass M(chi) at 90% CL in the muon for various operators in the EFT.

Observed limits on M* as a function of the DM particle mass M(chi) at 95% CL in the electron for various operators in the EFT.

Observed limits on M* as a function of the DM particle mass M(chi) at 95% CL in the muon for various operators in the EFT.

Observed limits on M* as a function of the DM particle mass M(chi) at 95% CL for the combination of the electron and muon channel for various operators in the EFT.

Background-only fit to the observed numbers of events (black points) as a function of the diphoton invariant mass $m_{\gamma\gamma}$.

Expected and observed 95% CL upper limits on the signal fiducial cross section $\sigma_{\textrm{fid}}$, assuming 100% branching ratio for ALP decay into two photons, as a function of the hypothetical ALP mass $m_{\textrm{X}}$. The 1$\sigma$ and 2$\sigma$ confidence intervals are shown by the coloured bands.

Expected and observed 95% CL upper limits on the the ALP coupling constant, assuming 100% branching ratio for ALP decay into two photons, as a function of the hypothetical ALP mass $m_{\textrm{X}}$. The 1$\sigma$ and 2$\sigma$ confidence intervals are shown by the coloured bands. Contours of the ALP natural width $\Gamma$ are illustrated by the smooth blue solid lines.

Fiducial region acceptance of signal events for coupling constant f$^{-1}=0.05$ TeV$^{-1}$. EL, SD, and DD stand for the exclusive, single-dissociative, and double-dissociative processes. The acceptances are parameterised as $p_0 + p^{i}_{1} e^{p_{2}^{i} m_{\textrm{X}}} + p_{3}^{i} e^{p_{4}^{i} m_{\textrm{X}}} $ , where $i$ specifies the process type, exclusive, single-dissociative, or double-dissociative.

Correction factors $A_{\textrm{X}}/A_{0}$ and $C_{\textrm{X}}$ for the exclusive signal events with ALP coupling constant f$^{-1}$=0.05 TeV$^{-1}$, where acceptance $A_{\textrm{X}}$ and efficiency $C_{\textrm{X}}$ are defined in arXiv:2102.13405. $A_{\textrm{X}}$/$A_{0}$ and $C_{\textrm{X}}$ are parameterised as $p_0 + p^{i}_{1} e^{p_{2}^{i} m_{\textrm{X}}} + p_{3}^{i} e^{p_{4}^{i} m_{\textrm{X}}}$, where $i$ specifies the process type.

Simulated ALP signal cutflow for $m_{\rm{X}}$=300 GeV and $m_{\rm{X}}$=1200 GeV. The yields are normalized to a luminosity of 14.6 fb$^{-1}$. Selections are applied for each side after the selection on acoplanarity. The union of the sets of selected events is taken finally.

Definition of the fiducial phase space.

The seven input variables to the NN ordered by their discriminating power. The jet that is not $b$-tagged is referred to as $\textit{untagged}~$jet.

The seven input variables to the NN ordered by their discriminating power. The jet that is not $b$-tagged is referred to as $\textit{untagged}~$jet.

Event yields for the different processes estimated with the fit to the $O_\mathrm{NN}$ distribution compared to the numbers of observed events. Only the statistical uncertainties are quoted. The $Z,VV+\mathrm{jets}$ contributions and the multijet background are fixed in the fit; therefore no uncertainty is quoted for these processes.

Event yields for the different processes estimated with the fit to the $O_\mathrm{NN}$ distribution compared to the numbers of observed events. Only the statistical uncertainties are quoted. The $Z,VV+\mathrm{jets}$ contributions and the multijet background are fixed in the fit; therefore no uncertainty is quoted for these processes.

Detailed list of the contribution from each source of uncertainty to the total uncertainty in the measured values of $\sigma_{\mathrm{fid}}(tq)$ and $\sigma_{\mathrm{fid}}(\bar tq)$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3\%$. Uncertainties contributing less than $0.5\%$ are marked with ‘<0.5’.

Detailed list of the contribution from each source of uncertainty to the total uncertainty in the measured values of $\sigma_{\mathrm{fid}}(tq)$ and $\sigma_{\mathrm{fid}}(\bar tq)$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3\%$. Uncertainties contributing less than $0.5\%$ are marked with ‘<0.5’.

Significant contributions to the total relative uncertainty in the measured value of $R_{t}$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3~\%$. Uncertainties contributing less than $0.5~\%$ are not shown.

Significant contributions to the total relative uncertainty in the measured value of $R_{t}$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3~\%$. Uncertainties contributing less than $0.5~\%$ are not shown.

Slopes $a$ of the mass dependence of the measured cross$-$sections.

Slopes $a$ of the mass dependence of the measured cross$-$sections.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the neural network discriminant, $O_{\mathrm{NN}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the neural network discriminant, $O_{\mathrm{NN}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the second neural network discriminant, $O_{\mathrm{NN2}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the second neural network discriminant, $O_{\mathrm{NN2}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.

Migration matrix for $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $p_{\mathrm{T}}(t)$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $p_{\mathrm{T}}(t)$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(\hat{t\hspace{-0.2mm}})|$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(\hat{t\hspace{-0.2mm}})|$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(t)|$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Migration matrix for $|y(t)|$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.

Uncertainties in the normalisations of the different backgrounds for all processes, as derived from the total cross-section measurement.

Uncertainties in the normalisations of the different backgrounds for all processes, as derived from the total cross-section measurement.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(t)|$ at parton level.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events(at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.

Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-quark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.

Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-antiquark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.

Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the normalised differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.

Uncertainties for the absolute differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the normalised differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Uncertainties for the absolute differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$.

Uncertainties for the normalised differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.

Expected and observed $am_{T2}$ distribution for bCd_high1 SR, before applying the $am_{T2}>200$ GeV requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.

Expected and observed leading b-jet $p_T$ distribution for bCd_high2 SR, before applying the leading b-jet $p_T>170$ GeV requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.

Expected and observed $E_T^{miss}$ distribution for tNbC_mix SR, before applying the $E_T^{miss}>270$ GeV requirement. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.

Expected and observed lepton $p_T$ distribution for bCa_low SR. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.

Expected and observed lepton $p_T$ distribution for bCa_med SR. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.

Expected and observed $am_T2$ distribution for bCb_med1 SR. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.

Expected and observed $am_T2$ distribution for bCb_high SR. The uncertainty includes statistical and all experimental systematic uncertainties. The last bin includes overflows.

Best expected signal region for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. This mapping is used for the final combined exclusion limits.

Best expected signal region for the $\tilde t_1$ three-body scenario ($\tilde t_1\to bW\chi^0_1$). This mapping is used for the final combined exclusion limits.

Best expected signal region for the $\tilde t_1$ four-body scenario ($\tilde t_1\to bff'\chi^0_1$). This mapping is used for the final combined exclusion limits.

Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. This mapping is used for the final combined exclusion limits.

Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=150$ GeV. This mapping is used for the final combined exclusion limits.

Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=106$ GeV. This mapping is used for the final combined exclusion limits.

Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+5$ GeV. This mapping is used for the final combined exclusion limits.

Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. This mapping is used for the final combined exclusion limits.

Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\tilde t_1}-10$ GeV. This mapping is used for the final combined exclusion limits.

Best expected signal region for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\tilde t_1}=300$ GeV. This mapping is used for the final combined exclusion limits.

Upper limits on the model cross-section for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Observed exclusion contour for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Expected exclusion contour for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Upper limit on signal events for the $\tilde t_1$ three-body scenario ($\tilde t_1\to bW\chi^0_1$).

Observed exclusion contour for the $\tilde t_1$ three-body scenario ($\tilde t_1\to bW\chi^0_1$).

Expected exclusion contour for the $\tilde t_1$ three-body scenario ($\tilde t_1\to bW\chi^0_1$).

Upper limit on signal events for the $\tilde t_1$ four-body scenario ($\tilde t_1\to bff'\chi^0_1$).

Observed exclusion contour for the $\tilde t_1$ four-body scenario ($\tilde t_1\to bff'\chi^0_1$).

Expected exclusion contour for the $\tilde t_1$ four-body scenario ($\tilde t_1\to bff'\chi^0_1$).

Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=150$ GeV.

Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=150$ GeV.

Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=150$ GeV.

Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=106$ GeV.

Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=106$ GeV.

Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=106$ GeV.

Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+5$ GeV.

Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+5$ GeV.

Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+5$ GeV.

Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\tilde t_1}-10$ GeV.

Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\tilde t_1}-10$ GeV.

Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\tilde t_1}-10$ GeV.

Upper limit on signal events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\tilde t_1}=300$ GeV.

Observed exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\tilde t_1}=300$ GeV.

Expected exclusion contour for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\tilde t_1}=300$ GeV.

Acceptance of tN_diag SR ($E_T^{miss}>150$ GeV, $m_T>140$ GeV) for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of tN_med SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of tN_boost SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of bCb_med2 SR ($am_{T2}>250$ GeV, $m_T>60$ GeV) for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of bCc_diag SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of bCd_bulk SR ($am_{T2}>175$ GeV, $m_T>120$ GeV) for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of bCd_high1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of bCd_high2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of bCa_med for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of bCa_low for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of bCb_med1 for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of bCb_high for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of 3-body SR ($80<am_{T2}<90$ GeV, $m_T>120$ GeV) for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$). The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Acceptance of tNbC_mix SR for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The acceptance is defined as the fraction of signal events that pass the analysis selection performed on generator-level objects, therefore emulating an ideal detector with perfect particle identification and no measurement resolution effects.

Efficiency of tN_diag SR ($E_T^{miss}>150$ GeV, $m_T>140$ GeV) for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of tN_med SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of tN_boost SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of bCb_med2 SR ($am_{T2}>250$ GeV, $m_T>60$ GeV) for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of bCc_diag SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of bCd_bulk SR ($am_{T2}>175$ GeV, $m_T>120$ GeV) for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of bCd_high1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of bCd_high2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of bCa_med for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of bCa_low for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of bCb_med1 for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of bCb_high for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of 3-body SR ($80<am_{T2}<90$ GeV, $m_T>120$ GeV) for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$). The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Efficiency of tNbC_mix SR for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$. The efficiency is the ratio between the expected signal rate calculated with simulated data passing all the reconstruction level cuts applied to reconstructed objects, and the signal rate for an ideal detector (with perfect particle identification and no measurement resolution effects).

Number of generated events for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Number of generated events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Number of generated events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV; $E_T^{miss}$(gen)$>60$ GeV.

Number of generated events for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV; $E_T^{miss}$(gen)$>250$ GeV.

Number of generated events for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$).

Number of generated events for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Cross-section for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Cross-section for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Cross-section for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Cross-section for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$).

Cross-section for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Combined experimental systematic uncertainty of expected tN_diag SR yields for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$, using the 2 highest $E_T^{miss}$ and 2 highest $m_T$ bins.

Combined experimental systematic uncertainty of expected tN_med SR yields for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Combined experimental systematic uncertainty of expected tN_boost SR yields for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Combined experimental systematic uncertainty of expected bCb_med2 SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$, using the 2 highest $am_{T2}$ and 2 highest $m_T$ bins.

Combined experimental systematic uncertainty of expected bCc_diag SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Combined experimental systematic uncertainty of expected bCd_bulk SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$, using the 2 highest $am_{T2}$ and 2 highest $m_T$ bins.

Combined experimental systematic uncertainty of expected bCd_high1 SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Combined experimental systematic uncertainty of expected bCd_high2 SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Combined experimental systematic uncertainty of expected bCa_med SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Combined experimental systematic uncertainty of expected bCa_low SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Combined experimental systematic uncertainty of expected bCb_med1 SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Combined experimental systematic uncertainty of expected bCb_high SR yields for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Combined experimental systematic uncertainty of expected 3-body SR yields for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$), using the 2 lowest $am_{T2}$ and 2 highest $m_T$ bins.

Combined experimental systematic uncertainty of expected tNbC_mix SR yields for the asymmetric scenario ($\tilde t_1$, $\tilde t_1\to t\chi^0_1$, b $\chi^\pm_1$) with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Observed CLs in tN_diag SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Observed CLs in tN_med SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Observed CLs in tN_boost SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Observed CLs in bCb_med2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Observed CLs in bCc_diag SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Observed CLs in bCd_bulk SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Observed CLs in bCd_high1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Observed CLs in bCd_high2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Observed CLs in bCa_med SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Observed CLs in bCa_low SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Observed CLs in bCb_med1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Observed CLs in bCb_high SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Observed CLs in 3-body SR for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$).

Observed CLs in tNbC_mix SR for the mixed scenario (50% $\tilde t_1\to t\chi^0_1$, 50% $\tilde t_1\to b\chi^0_1$).

Expected CLs in tN_diag SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Expected CLs in tN_med SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Expected CLs in tN_boost SR for the $\tilde t_1\to t\chi^0_1$ scenario with $m_{\tilde t_1}>m_t+m_{\chi^0_1}$.

Expected CLs in bCb_med2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Expected CLs in bCc_diag SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Expected CLs in bCd_bulk SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Expected CLs in bCd_high1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Expected CLs in bCd_high2 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=2\times m_{\chi^0_1}$.

Expected CLs in bCa_med SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Expected CLs in bCa_low SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Expected CLs in bCb_med1 SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Expected CLs in bCb_high SR for the $\tilde t_1\to b\chi^\pm_1$ scenario with $m_{\chi^\pm_1}=m_{\chi^0_1}+20$ GeV.

Expected CLs in 3-body SR for the 3-body scenario ($\tilde t_1\to b W\chi^0_1$).

Expected CLs in tNbC_mix SR for the mixed scenario (50% $\tilde t_1\to t\chi^0_1$, 50% $\tilde t_1\to b\chi^\pm_1$).

Etmiss distribution for SRC1 after all selection requirements except those on Etmiss.

Etmiss distribution for SRC2 after all selection requirements except those on Etmiss.

Etmiss distribution for SRC3 after all selection requirements except those on Etmiss.

Observed exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario.

Expected exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario.

Observed exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=50%.

Expected exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=50%.

Observed exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=100%.

Expected exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=100%.

Observed exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=75%.

Expected exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=75%.

Observed exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=50%.

Expected exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=50%.

Observed exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=25%.

Expected exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=25%.

Observed exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=0%.

Expected exclusion limit at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=0%.

Nominal observed excluded cross sections at 95% CL in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario, once corrected by the recorded luminosity and the efficiency times acceptance of the model itself.

Signal region (SR) combination providing the lowest expected CLs in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario.

Signal region (SR) combination providing the lowest expected CLs in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=75%.

Signal region (SR) combination providing the lowest expected CLs in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=50%.

Signal region (SR) combination providing the lowest expected CLs in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=25%.

Signal region (SR) combination providing the lowest expected CLs in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where BR(stop --> top+neutralino)=0%.

Signal acceptance for the different signal regions (SR) in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario with both stops decaying to top+neutralino. The acceptance is defined in Appendix A of arXiv:1403.4853.

Signal efficiency for the different signal regions (SR) in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario with both stops decaying to top+neutralino.

Signal acceptance for the different signal regions (SR) in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario with both stops decaying to b+chargino. The acceptance is defined in Appendix A of arXiv:1403.4853.

Signal efficiency for the different signal regions (SR) in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario with both stops decaying to b+chargino.

Number of generated Monte Carlo events in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where both stops decay to top+neutralino.

Number of generated Monte Carlo events in the ( M(STOP), M(NEUTRALINO) ) mass plane in the stop pair production scenario where both stops decay to b+chargino.

Stop signal production cross sections in the ( M(STOP), M(NEUTRALINO) ) mass plane.

Total experimental systematic uncertainty in percent on the signal yield for SRA1 in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where both stops decay to top+neutralino. The uncertainty does not include Monte Carlo statistical uncertainties, nor theoretical uncertainties on the signal cross section.

Total experimental systematic uncertainty in percent on the signal yield for SRA2 in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where both stops decay to top+neutralino. The uncertainty does not include Monte Carlo statistical uncertainties, nor theoretical uncertainties on the signal cross section.

Total experimental systematic uncertainty in percent on the signal yield for SRA3 in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where both stops decay to top+neutralino. The uncertainty does not include Monte Carlo statistical uncertainties, nor theoretical uncertainties on the signal cross section.

Total experimental systematic uncertainty in percent on the signal yield for SRA4 in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where both stops decay to top+neutralino. The uncertainty does not include Monte Carlo statistical uncertainties, nor theoretical uncertainties on the signal cross section.

Total experimental systematic uncertainty in percent on the signal yield for SRB in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where both stops decay to top+neutralino. The uncertainty does not include Monte Carlo statistical uncertainties, nor theoretical uncertainties on the signal cross section.

Total experimental systematic uncertainty in percent on the signal yield for SRC1 in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where both stops decay to top+neutralino. The uncertainty does not include Monte Carlo statistical uncertainties, nor theoretical uncertainties on the signal cross section.

Total experimental systematic uncertainty in percent on the signal yield for SRC2 in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where both stops decay to top+neutralino. The uncertainty does not include Monte Carlo statistical uncertainties, nor theoretical uncertainties on the signal cross section.

Total experimental systematic uncertainty in percent on the signal yield for SRC3 in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario where both stops decay to top+neutralino. The uncertainty does not include Monte Carlo statistical uncertainties, nor theoretical uncertainties on the signal cross section.

Observed and expected CLs in the ( M(STOP), M(NEUTRALINO) ) mass plane for the stop pair production scenario. The value for the best expected signal region combination is shown.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

No description provided.

Distribution of mT2 for events passing all the signal candidate selection requirements, except that on mT2 of the L100 selection, for DF events.

Distribution of mT2 for events passing all the signal candidate selection requirements, except that on mT2 of the L110 selection, for SF events.

Distribution of mT2 for events passing all the signal candidate selection requirements, except that on mT2 of the L110 selection, for DF events.

Observed 95% CL exclusion contour in the (STOP1, CHARGINO1) mass plane for a fixed value of m(NEUTRALINO1) = 1 GeV.

Expected 95% CL exclusion contour in the (STOP1, CHARGINO1) mass plane for a fixed value of m(NEUTRALINO1) = 1 GeV.

Observed 95% CL exclusion minus 1 sigma contour in the (STOP1, CHARGINO1) mass plane for a fixed value of m(NEUTRALINO1) = 1 GeV.

Observed 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane for a fixed value of m(STOP1) - m(CHARGINO1) = 10 GeV.

Expected 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane for a fixed value of m(STOP1) - m(CHARGINO1) = 10 GeV.

Observed 95% CL exclusion minus 1 sigma contour in the (STOP1, NEUTRALINO1) mass plane for a fixed value of m(STOP1) - m(CHARGINO1) = 10 GeV.

Observed 95% CL exclusion contour in the (CHARGINO1, NEUTRALINO1) mass plane for a fixed value of m(STOP1) = 300 GeV.

Expected 95% CL exclusion contour in the (CHARGINO1, NEUTRALINO1) mass plane for a fixed value of m(STOP1) = 300 GeV.

Observed 95% CL exclusion minus one sigma contour in the (CHARGINO1, NEUTRALINO1) mass plane for a fixed value of m(STOP1) = 300 GeV.

Observed 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane of m(CHARGINO1) = 2 m(NEUTRALINO1).

Expected 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane for m(CHARGINO1) = 2 m(NEUTRALINO1).

Observed 95% CL exclusion minus one sigma contour in the (STOP1, NEUTRALINO1) mass plane for m(CHARGINO1) = 2 m(NEUTRALINO1).

Observed 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane.

Expected 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane.

Observed 95% CL exclusion minus one sigma contour in the (STOP1, NEUTRALINO1) mass plane.

Observed 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane.

Expected 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane.

Observed 95% CL exclusion minus one sigma contour in the (STOP1, NEUTRALINO1) mass plane.

Observed 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane for a fixed value of m(CHARGINO1) = 106 GeV.

Expected 95% CL exclusion contour in the (STOP1, NEUTRALINO1) mass plane for a fixed value of m(CHARGINO1) = 106 GeV.

Observed 95% CL exclusion minus one sigma contour in the (STOP1, NEUTRALINO1) mass plane for a fixed value of m(CHARGINO1) = 106 GeV.

Expected CLs values for Fig. 14.

Observed CLs values for Fig. 14.

Observed cross-section limits for Fig. 14.

Expected CLs values for Fig. 15.

Observed CLs values for Fig. 15.

Observed cross-section limits for Fig. 15.

Expected CLs values for Fig. 16.

Observed CLs values for Fig. 16.

Observed cross-section limits for Fig. 14.

Expected CLs values for Fig. 17.

Observed CLs values for Fig. 17.

Observed cross-section limits for Fig. 17.

Expected CLs values for Fig. 19.

Observed CLs values for Fig. 19.

Observed cross-section limits for Fig. 19.

Number of generated events for Fig. 16.

Acceptance of S1 for Fig. 16.

Efficiency of S1 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S1 for Fig. 16.

Acceptance of S2 for Fig. 16.

Efficiency of S2 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S2 for Fig. 16.

Acceptance of S3 for Fig. 16.

Efficiency of S3 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S3 for Fig. 16.

Acceptance of S4 for Fig. 16.

Efficiency of S4 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S4 for Fig. 16.

Acceptance of S5 for Fig. 16.

Efficiency of S5 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S5 for Fig. 16.

Acceptance of S6 for Fig. 16.

Efficiency of S6 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S6 for Fig. 16.

Acceptance of S7 for Fig. 16.

Efficiency of S7 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in S7 for Fig. 16.

Acceptance of H160 for Fig. 16.

Efficiency of H160 for Fig. 16.

Total systematic uncertainty IN PCT on signal yields in H160 for Fig. 16.

Observed cross-section limits for Fig. 20.

Observed cross-section limits for Fig. 20.

Expected cross-section limits for Fig. 20.

Total number of generated MC events for each point of the grid.

Observed upper limit on the signal cross-section, in pb, for each point of the grid in the different flavour channel.

Observed upper limit on the signal cross-section, in pb, for each point of the grid in the same flavour channel.

The best expected signal region chosen for each point of the grid in the different flavour channel.

The best expected signal region chosen for each point of the grid in the same flavour channel.

Observed CLs for each point of the grid in the different flavour channel.

Observed CLs for each point of the grid in the same flavour channel.

Expected CLs for each point of the grid in the different flavour channel.

Expected CLs for each point of the grid in the same flavour channel.

Signal acceptance for all the analysis cuts, except the BDTG cut, for each point of the grid in the different flavour channel.

Signal acceptance for all the analysis cuts, except the BDTG cut, for each point of the grid in the same flavour channel.

Signal efficiency, including the acceptance of the BDTG cut, for each point of the grid in the different flavour channel.

Signal efficiency, including the acceptance of the BDTG cut, for each point of the grid in the same flavour channel.

Total signal experimental systematic uncertainty for each point of the grid in the different flavour channel.

Signal efficiency, including the acceptance of the BDTG cut, for each point of the grid in the same flavour channel.

Number of simulated events passing various stages of the selection in the hadronic mT2 analysis for a signal sample with m(STOP1)=300 GeV, m(CHARGINO1) = 150 GeV and m(NEUTRALINO1) = 50 GeV, and with the top squark decaying as STOP1 --> CHARGINO1+ BOTTOM -> W(*)+NEUTRALINO1+ BOTTOM with unit probability. Event weights are applied to correct simulated events to data. "Isolation" includes the effects of tight ID for electrons and the isolation selection for both electrons and muons. "Cleaning cuts" refer to cuts applied to remove non-collision backgrounds and detector noise.

Number of simulated events passing various stages of the selection in the hadronic mT2 analysis for a signal sample with m(STOP1)=250 GeV, m(CHARGINO1) = 106 GeV and m(NEUTRALINO1) = 60 GeV, and with the top squark decaying as STOP1 --> CHARGINO1+ BOTTOM -> W(*)+NEUTRALINO1+ BOTTOM with unit probability. Event weights are applied to correct simulated events to data. "Isolation" includes the effects of tight ID for electrons and the isolation selection for both electrons and muons. "Cleaning cuts" refer to cuts applied to remove non-collision backgrounds and detector noise.

Number of simulated events passing various stages of the selection in the leptonic mT2 analysis for two signal samples with the top squark decaying as STOP1 --> CHARGINO1+ BOTTOM -> W(*)+NEUTRALINO1+BOTTOM with unit probability. Event weights are applied to correct simulated events to data. "Isolation" includes the effects of tight ID for electrons and the isolation selection for both electrons and muons. "Cleaning cuts" refer to cuts applied to remove non-collision backgrounds and detector noise.

Number of simulated events passing various stages of the selection in the leptonic mT2 analysis for a signal sample with m(STOP1)=180 GeV and m(NEUTRALINO1) = 60 GeV, and with the top squark decaying as STOP1 --> W + BOTTOM + NEUTRALINO1 with unit probability. Event weights are applied to correct simulated events to data. "Isolation" includes the effects of tight ID for electrons and the isolation selection for both electrons and muons. "Cleaning cuts" refer to cuts applied to remove non-collision backgrounds and detector noise.

Number of simulated events passing various stages of the selection in the in the MVA analysis for all signal samples used to train the BDTG and with the top squark decaying as STOP1 --> TOP + NEUTRALINO1 with unit probability. Event weights are applied to correct simulated events to data. "Isolation" includes the effects of tight ID for electrons and the isolation selection for both electrons and muons. "Cleaning cuts" refer to cuts applied to remove non-collision backgrounds and detector noise. The index i in category (Ci) is the one reported in table 3 for each signal point, SF and DF.