Showing 10 of 90 results
A test of lepton flavor universality in B$^{\pm}$$\to$ K$^{\pm}\mu^+\mu^-$ and B$^{\pm}$$\to$ K$^{\pm}$e$^+$e$^-$ decays, as well as a measurement of differential and integrated branching fractions of a nonresonant B$^{\pm}$$\to$ K$^{\pm}\mu^+\mu^-$ decay are presented. The analysis is made possible by a dedicated data set of proton-proton collisions at $\sqrt{s}$ = 13 TeV recorded in 2018, by the CMS experiment at the LHC, using a special high-rate data stream designed for collecting about 10 billion unbiased b hadron decays. The ratio of the branching fractions $\mathcal{B}$(B$^{\pm}$$\to$ K$^{\pm}\mu^+\mu^-$) to $\mathcal{B}$(B$^{\pm}$$\to$ K$^{\pm}$e$^+$e$^-$) is determined from the measured double ratio $R$(K) of these decays to the respective branching fractions of the B$^\pm$$\to$ J/$\psi$K$^\pm$ with J/$\psi$$\to$$\mu^+\mu^-$ and e$^+$e$^-$ decays, which allow for significant cancellation of systematic uncertainties. The ratio $R$(K) is measured in the range 1.1 $\lt q^2 \lt$ 6.0 GeV$^2$, where $q$ is the invariant mass of the lepton pair, and is found to be $R$(K) = 0.78$^{+0.47}_{-0.23}$, in agreement with the standard model expectation $R$(K) $\approx$ 1. This measurement is limited by the statistical precision of the electron channel. The integrated branching fraction in the same $q^2$ range, $\mathcal{B}$(B$^{\pm}$$\to$ K$^{\pm}\mu^+\mu^-$) = (12.42 $\pm$ 0.68) $\times$ 10$^{-8}$, is consistent with the present world-average value and has a comparable precision.
The differential $\text{B}^+ \to \text{K}^+\mu^+\mu^-$ branching fraction measured in the individual $q^2$ bins. The uncertainties in the yields are statistical uncertainties from the fit, while the branching fraction uncertainties include both the statistical and systematic components.
Differential branching fraction $d\mathcal{B}/dq^2$, with theoretical predictions obtained with the HEPFiT, SuperIso, Flavio, and EOS packages. The HEPFiT predictions are available only for $q^2 < 8\ \mathrm{GeV}^2$.
Relative uncertainties in the differential branching fraction measurement of $\mathrm{B}^+\to\mathrm{K}^+\mu^+\mu^-$ per $q^2$ bin.
Correlation matrix for the differential branching fraction extraction between different $q^2$ bins in the simultaneous fit.
The product of acceptance and efficiency ($A\epsilon$) of the $\mathcal{B}(\mathrm{B}^+\to\mathrm{K}^+\mu^+\mu^-)$ channel, as a function of the muon pair $q^2$, as measured in simulated signal events, after all the corrections applied. In the figure, regions corresponding to resonances are displayed with red markers.
Same as Table 5, but for the bins containing the J$\psi$ and $\psi$(2S) resonances.
Integrated branching fraction $\mathcal{B}(\mathrm{B}^\pm \to \mathrm{K}^\pm\mu^+\mu^-)$ in the low-$q^2$ region.
Ratio of branching fractions $\mathcal{B}(\text{B}^\pm \to \text{K}^\pm\mu^+\mu^-)$ to $\mathcal{B}(\text{B}^\pm \to \text{K}^\pm\text{e}^+\text{e}^-)$, determined from the measured double ratio $R$(K) of these decays to the respective branching fractions of the decay chains $\text{B}^\pm\to\text{J/}\psi\text{K}^\pm$ with $\text{J/}\psi\to\mu^+\mu^-$ and $\text{e}^+\text{e}^-$.
Negative log likelihood function from the fit profiled as a function of the inverse ratio $R(\mathrm{K})^{-1}$.
Dijet production in deep inelastic ep scattering is investigated in the region of low values of the Bjorken-variable x (10^-4 < x < 10^-2) and low photon virtualities Q^2 (5 < Q^2 < 100 GeV^2). The measured dijet cross sections are compared with perturbative QCD calculations in next-to-leading order. For most dijet variables studied, these calculations can provide a reasonable description of the data over the full phase space region covered, including the region of very low x. However, large discrepancies are observed for events with small separation in azimuth between the two highest transverse momentum jets. This region of phase space is described better by predictions based on the CCFM evolution equation, which incorporates k_t factorized unintegrated parton distributions. A reasonable description is also obtained using the Color Dipole Model or models incorporating virtual photon structure.
Inclusive dijet cross section for a lower ET cut off of (5+0) GeV for the highest ET jet.
Inclusive dijet cross section for a lower ET cut off of (5+1) GeV for the highest ET jet.
Inclusive dijet cross section for a lower ET cut off of (5+2) GeV for the highest ET jet.
Inclusive dijet cross section for a lower ET cut off of (5+4) GeV for the highest ET jet.
Inclusive dijet cross section for a lower ET cut off of (5+7) GeV for the highest ET jet.
Inclusive dijet cross section averaged over the indicated Q**2 at ET(MAX) for a lower cut off of ET (5+2) GeV for the highest ET jet.
Inclusive dijet cross section averaged over the indicated regions of X, Q**2 and ABS(DETARAP) for a lower cut off of ET (5+2) GeV for the highest ET jet.
The dijet rate averaged over the indicated regions of Q**2 and X for a lower ET cut off of (5+0) GeV for the highest ET jet.
The dijet rate averaged over the indicated regions of Q**2 and X for a lower ET cut off of (5+1) GeV for the highest ET jet.
The dijet rate averaged over the indicated regions of Q**2 and X for a lower ET cut off of (5+2) GeV for the highest ET jet.
The dijet rate averaged over the indicated regions of Q**2 and X for a lower ET cut off of (5+4) GeV for the highest ET jet.
The dijet rate averaged over the indicated regions of Q**2 and X for a lower ET cut off of (5+7) GeV for the highest ET jet.
Dijet rate averaged over the indicated regions of Q**2, X and ET(MAX) for alower ET cut off of (5+2) GeV for the highest ET jet.
Dijet rate averaged over the indicated regions of Q**2, X and DETARAP for alower ET cut off of (5+2) GeV for the highest ET jet.
Measured ratio of the number of dijets with azimuthal separation < 120 degrees to the total number of dijet events.
Detailed measurements of $t$-channel single top-quark production are presented. They use 20.2 fb$^{-1}$ of data collected by the ATLAS experiment in proton-proton collisions at a centre-of-mass energy of 8 TeV at the LHC. Total, fiducial and differential cross-sections are measured for both top-quark and top-antiquark production. The fiducial cross-section is measured with a precision of 5.8 % (top quark) and 7.8 % (top antiquark), respectively. The total cross-sections are measured to be $\sigma_{\mathrm{tot}}(tq) = 56.7^{+4.3}_{-3.8}\;$pb for top-quark production and $\sigma_{\mathrm{tot}}(\bar{t}q) = 32.9^{+3.0}_{-2.7}\;$pb for top-antiquark production, in agreement with the Standard Model prediction. In addition, the ratio of top-quark to top-antiquark production cross-sections is determined to be $R_t=1.72 \pm 0.09$, with an improved relative precision of 4.9 % since several systematic uncertainties cancel in the ratio. The differential cross-sections as a function of the transverse momentum and rapidity of both the top quark and the top antiquark are measured at both the parton and particle levels. The transverse momentum and rapidity differential cross-sections of the accompanying jet from the $t$-channel scattering are measured at particle level. All measurements are compared to various Monte Carlo predictions as well as to fixed-order QCD calculations where available.
Predicted and observed event yields for the signal region (SR). The multijet background prediction is obtained from a binned maximum-likelihood fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution. All the other predictions are derived using theoretical cross-sections, given for the backgrounds in Sect. 6 and for the signal in Sect. 1. The quoted uncertainties are in the predicted cross-sections or in the number of multijet events, in case of the multijet process.
Predicted and observed event yields for the signal region (SR). The multijet background prediction is obtained from a binned maximum-likelihood fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution. All the other predictions are derived using theoretical cross-sections, given for the backgrounds in Sect. 6 and for the signal in Sect. 1. The quoted uncertainties are in the predicted cross-sections or in the number of multijet events, in case of the multijet process.
Definition of the fiducial phase space.
Definition of the fiducial phase space.
The seven input variables to the NN ordered by their discriminating power. The jet that is not $b$-tagged is referred to as $\textit{untagged}~$jet.
The seven input variables to the NN ordered by their discriminating power. The jet that is not $b$-tagged is referred to as $\textit{untagged}~$jet.
Event yields for the different processes estimated with the fit to the $O_\mathrm{NN}$ distribution compared to the numbers of observed events. Only the statistical uncertainties are quoted. The $Z,VV+\mathrm{jets}$ contributions and the multijet background are fixed in the fit; therefore no uncertainty is quoted for these processes.
Event yields for the different processes estimated with the fit to the $O_\mathrm{NN}$ distribution compared to the numbers of observed events. Only the statistical uncertainties are quoted. The $Z,VV+\mathrm{jets}$ contributions and the multijet background are fixed in the fit; therefore no uncertainty is quoted for these processes.
Detailed list of the contribution from each source of uncertainty to the total uncertainty in the measured values of $\sigma_{\mathrm{fid}}(tq)$ and $\sigma_{\mathrm{fid}}(\bar tq)$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3\%$. Uncertainties contributing less than $0.5\%$ are marked with ‘<0.5’.
Detailed list of the contribution from each source of uncertainty to the total uncertainty in the measured values of $\sigma_{\mathrm{fid}}(tq)$ and $\sigma_{\mathrm{fid}}(\bar tq)$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3\%$. Uncertainties contributing less than $0.5\%$ are marked with ‘<0.5’.
Significant contributions to the total relative uncertainty in the measured value of $R_{t}$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3~\%$. Uncertainties contributing less than $0.5~\%$ are not shown.
Significant contributions to the total relative uncertainty in the measured value of $R_{t}$. The estimation of the systematic uncertainties has a statistical uncertainty of $0.3~\%$. Uncertainties contributing less than $0.5~\%$ are not shown.
Slopes $a$ of the mass dependence of the measured cross$-$sections.
Slopes $a$ of the mass dependence of the measured cross$-$sections.
Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the neural network discriminant, $O_{\mathrm{NN}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.
Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the neural network discriminant, $O_{\mathrm{NN}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.
Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the second neural network discriminant, $O_{\mathrm{NN2}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.
Predicted (post-fit) and observed event yields for the signal region (SR), after the requirement on the second neural network discriminant, $O_{\mathrm{NN2}}~>~0.8$. The multijet background prediction is obtained from the fit to the $E_{\mathrm{T}}^{\mathrm{miss}}$ distribution described in Section 6, while all the other predictions and uncertainties are derived from the total cross$-$section measurement. In some cases there is no uncertainty quoted. In these cases the uncertainty is < 0.5.
Migration matrix for $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.
Migration matrix for $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.
Migration matrix for $p_{\mathrm{T}}(t)$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.
Migration matrix for $p_{\mathrm{T}}(t)$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.
Migration matrix for $|y(\hat{t\hspace{-0.2mm}})|$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.
Migration matrix for $|y(\hat{t\hspace{-0.2mm}})|$ at the particle level. The pseudo top quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.
Migration matrix for $|y(t)|$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.
Migration matrix for $|y(t)|$ at the parton level. The parton-level quark is shown on the $y$-axis and the reconstructed variable is shown on the $x$-axis.
Uncertainties in the normalisations of the different backgrounds for all processes, as derived from the total cross-section measurement.
Uncertainties in the normalisations of the different backgrounds for all processes, as derived from the total cross-section measurement.
Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.
Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.
Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.
Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level.
Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.
Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.
Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.
Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level.
Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.
Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.
Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.
Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level.
Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.
Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.
Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.
Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level.
Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.
Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.
Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.
Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $p_{\mathrm{T}}(t)$ at parton level.
Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(t)|$ at parton level.
Absolute and normalised unfolded differential $tq$ production cross$-$section as a function of $|y(t)|$ at parton level.
Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(t)|$ at parton level.
Absolute and normalised unfolded differential $\bar tq$ production cross$-$section as a function of $|y(t)|$ at parton level.
Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events(at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $ \bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the absolute differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the normalised differential cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ for $\bar tq$ events (at the particle level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the absolute differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the normalised differential cross-section as a function of $p_{\mathrm{T}}(t)$ for $ \bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the absolute differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Statistical correlation matrix for the normalised differential cross-section as a function of $|y(t)|$ for $\bar tq$ events (at the parton level). It includes the statistical uncertainty due to the number of data events and MC statistics.
Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-quark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.
Fiducial acceptance $A_{\mathrm{fid}}$ for different $t$-channel single top-antiquark MC samples. $^{\mathrm{(a)}}$ Calculation taken from AcerMC $+$ $\mathrm{P{\scriptsize YTHIA}6}$. $^{\mathrm{(b)}}$ Calculation taken from $\mathrm{P{\scriptsize OWHEG}}$-$\mathrm{B{\scriptsize OX}}$ $+$ $\mathrm{P{\scriptsize YTHIA}6}$.
Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,200,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.
Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})$ at particle level per bin ([0,35,50,75,100,150,300] GeV) in percent of $\left( \dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{t\hspace{-0.2mm}})}$.
Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{t\hspace{-0.2mm}})|$ at particle level per bin ([0,0.15,0.3,0.45,0.7,1.0,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{t\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})$ at particle level per bin ([30,45,60,75,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(\hat{j\hspace{-0.2mm}})}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the absolute differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the normalised differential $tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the absolute differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the normalised differential $\bar tq$ cross-section as a function of $|y(\hat{j\hspace{-0.2mm}})|$ at particle level per bin ([0.0, 1.2, 1.7, 2.2, 2.7, 3.3, 4.5]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(\hat{j\hspace{-0.2mm}})|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the absolute differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.
Uncertainties for the normalised differential $tq$ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,200,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the absolute differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.
Uncertainties for the normalised differential $\bar tq $ cross-section as a function of $p_{\mathrm{T}}(t)$ at parton level per bin ([0,50,100,150,300] GeV) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}p_{\mathrm{T}}(t)}$.
Uncertainties for the absolute differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the normalised differential $ tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
Uncertainties for the absolute differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$.
Uncertainties for the normalised differential $ \bar tq $ cross-section as a function of $|y(t)|$ at parton level per bin ([0,0.3,0.7,1.3,2.2]) in percent of $\left(\dfrac{1}{\sigma}\right)\dfrac{\mathrm{d}\sigma(\bar tq)}{\mathrm{d}|y(t)|}$. If the uncertainty reported in the paper is "0.0" for both the $\textit{plus}$ and $\textit{minus}$ variation, the value "+0.01" is assigned to the $\textit{plus}$ variation for technical reasons.
A search for a heavy resonance decaying into a top quark and a W boson in proton-proton collisions at $\sqrt{s} =$ 13 TeV is presented. The data analyzed were recorded with the CMS detector at the LHC and correspond to an integrated luminosity of 138 fb$^{-1}$. The top quark is reconstructed as a single jet and the W boson, from its decay into an electron or muon and the corresponding neutrino. A top quark tagging technique based on jet clustering with a variable distance parameter and simultaneous jet grooming is used to identify jets from the collimated top quark decay. The results are interpreted in the context of two benchmark models, where the heavy resonance is either an excited bottom quark b$^*$ or a vector-like quark B. A statistical combination with an earlier search by the CMS Collaboration in the all-hadronic final state is performed to place upper cross section limits on these two models. The new analysis extends the lower range of resonance mass probed from 1.4 down to 0.7 TeV. For left-handed, right-handed, and vector-like couplings, b$^*$ masses up to 3.0, 3.0, and 3.2 TeV are excluded at 95% confidence level, respectively. The observed upper limits represent the most stringent constraints on the b$^*$ model to date.
Distributions of MtW in the 1b category. The data are shown by filled markers, where the horizontal bars indicate the bin widths. The individual background contributions are given by filled histograms. The expected signal for a LH b* with mb∗ = 2.4 TeV is shown by a dashed line. The shaded region is the uncertainty in the total background estimate. The lower panel shows the ratio of data to the background estimate, with the total uncertainty on the predicted background displayed as the gray band.
Distributions of MtW in the 2b category. The data are shown by filled markers, where the horizontal bars indicate the bin widths. The individual background contributions are given by filled histograms. The expected signal for a LH b* with mb∗ = 2.4 TeV is shown by a dashed line. The shaded region is the uncertainty in the total background estimate. The lower panel shows the ratio of data to the background estimate, with the total uncertainty on the predicted background displayed as the gray band.
Upper limits on the production cross section times branching fraction of the b* LH hypothesis at a 95% CL. Dashed colored lines show the expected limits from the l+jets and all-hadronic channels, where the latter start at resonance masses of 1.4 TeV. The observed and expected limits from the combination are shown as solid and dashed black lines, respectively. The green and yellow bands show the 68 and 95% confidence intervals on the combined expected limits.
Upper limits on the production cross section times branching fraction of the b* RH hypothesis at a 95% CL. Dashed colored lines show the expected limits from the l+jets and all-hadronic channels, where the latter start at resonance masses of 1.4 TeV. The observed and expected limits from the combination are shown as solid and dashed black lines, respectively. The green and yellow bands show the 68 and 95% confidence intervals on the combined expected limits.
Upper limits on the production cross section times branching fraction of the b* VL hypothesis at a 95% CL. Dashed colored lines show the expected limits from the l+jets and all-hadronic channels, where the latter start at resonance masses of 1.4 TeV. The observed and expected limits from the combination are shown as solid and dashed black lines, respectively. The green and yellow bands show the 68 and 95% confidence intervals on the combined expected limits.
Upper limits on the production cross section times branching fraction of the B+b hypothesis at a 95% CL. Dashed colored lines show the expected limits from the l+jets and all-hadronic channels, where the latter start at resonance masses of 1.4 TeV. The observed and expected limits from the combination are shown as solid and dashed black lines, respectively. The green and yellow bands show the 68 and 95% confidence intervals on the combined expected limits.
Upper limits on the production cross section times branching fraction of the B+t hypothesis at a 95% CL. Dashed colored lines show the expected limits from the l+jets and all-hadronic channels, where the latter start at resonance masses of 1.4 TeV. The observed and expected limits from the combination are shown as solid and dashed black lines, respectively. The green and yellow bands show the 68 and 95% confidence intervals on the combined expected limits.
A search for physics beyond the standard model (SM) in the final state with a hadronically decaying tau lepton and a neutrino is presented. This analysis is based on data recorded by the CMS experiment from proton-proton collisions at a center-of-mass energy of 13 TeV at the LHC, corresponding to a total integrated luminosity of 138 fb$^{=1}$. The transverse mass spectrum is analyzed for the presence of new physics. No significant deviation from the SM prediction is observed. Limits are set on the production cross section of a W' boson decaying into a tau lepton and a neutrino. Lower limits are set on the mass of the sequential SM-like heavy charged vector boson and the mass of a quantum black hole. Upper limits are placed on the couplings of a new boson to the SM fermions. Constraints are put on a nonuniversal gauge interaction model and an effective field theory model. For the first time, upper limits on the cross section of $t$-channel leptoquark (LQ) exchange are presented. These limits are translated into exclusion limits on the LQ mass and on its coupling in the $t$-channel. The sensitivity of this analysis extends into the parameter space of LQ models that attempt to explain the anomalies observed in B meson decays. The limits presented for the various interpretations are the most stringent to date. Additionally, a model-independent limit is provided.
The transverse mass distribution of $ au$ leptons and missing transverse momentum observed in the Run-2 data (black dots with statistical uncertainty) as well as the expectation from SM processes (stacked histograms). Different signal hypotheses normalized to 10 fb$^{-1}$ are illustrated as dashed lines for exemplary SSM W$\prime$ boson, QBH and EFT signal hypotheses. The ratios of the background-subtracted data yields to the expected background yields are presented in the lower panel. The combined statistical and systematic uncertainties in the background are represented by the grey shaded band in the ratio panel.
Bayesian upper exclusion limits at 95% CL on the product of the cross section and branching fraction of a W$\prime$ boson decaying to a $\tau$ lepton and a neutrino in the SSM model. For this model, W$\prime$ boson masses of up to 4.8 TeV can be excluded. The limit is given by the intersection of the observed (solid) limit and the theoretical cross section (blue dotted curve). The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively. The $\sigma \mathcal{B}$ for an SSM W' boson, along with its associated uncertainty, calculated at NNLO precision in QCD is shown.
Bayesian 95% CL model-independent upper limit on the product of signal cross sections and branching fraction for the $\tau+\nu$ decay for a back-to-back $\tau$ lepton plus $p_{T}^{miss}$ topology. To calculate this limit, all events for signal, background, and data are summed starting from a minimum $m_{T}$ threshold and then divided by the total number of events. No assumption on signal shape is included in this limit. The expected (dashed line) and observed (solid line) limits are shown as well as the 68% and 95% CL uncertainty bands (green and yellow, respectively).
Bayesian upper exclusion limits on the ratio $g_{W'}/g_{W}$ for an SSM-like W$\prime$ boson are shown. The unity coupling ratio (blue dotted curve) corresponds to the SSM common benchmark. The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively.
Bayesian lower exclusion limits on the NUGIM G(221) mixing angle $\cot(\theta_{E})$ are shown as a function of the W$\prime$ boson mass. The theoretically excluded region is shaded in grey. The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively.
Bayesian upper exclusion limits at 95% CL on the product of the production cross section and branching fraction of a QBH in an associated $ au$ lepton and neutrino final state. Minimum threshold masses $m_{th}$ of up to 6.6 TeV are excluded at 95% CL. The observed limit (solid line) is obtained from the intersection with the LO QBH cross section (blue dotted curve). The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively.
Bayesian upper limits at 95% CL on the cross section of the process $pp\rightarrow\tau\nu$ mediated via LQ exchange in the t-channel. The inner (green) band and the outer (yellow) band indicate the regions containing 68 and 95%, respectively, of the distribution of limits expected under the background-only hypothesis. The predicted LQ cross section at LO in the three coupling benchmark scenarios is depicted in different colors for $g_{U}=1$. The uncertainty bandy correspond to the sum in quadrature of PDF and scale variations. The first benchmark scenario considers only couplings to left-handed SM fermions (i.e. $\beta_{\text{R}}^{ij}=0$) and is referred to as "best fit LH". The second benchmark, referred to as "best fit LH+RH", considers $|\beta_{\text{R}}^{\text{b}\tau}|=1$ and all other $\beta_{\text{R}}^{ij}=0$. In the third "democratic" benchmark, equal couplings only to LH fermions are assumed, i.e. $\beta_{\text{L}}^{ij}=1$ and $\beta_{\text{R}}^{ij}=0$ for all $i$ and $j$.
Expected and observed lower limits of the LQ mass as a function of the coupling $g_{U}$ in the LH scenario. The blue band shows the 68% and 95% regions of $g_{U}$ preferred by the fit to the b anomalies data.
Expected and observed lower limits of the LQ mass as a function of the coupling $g_{U}$ in the LH+RH scenario. The blue band shows the 68% and 95% regions of $g_{U}$ preferred by the fit to the b anomalies data.
Expected and observed lower limits of the LQ mass as a function of the coupling $g_{U}$ in the democratic scenario. The blue band shows the 68% and 95% regions of $g_{U}$ preferred by the fit to the b anomalies data.
Bayesian upper exclusion limits at 95% CL on each of the Wilson coefficients described by the EFT model based on 2016-2018 data. The three different coupling types represent a left-handed vector coupling ($\epsilon^{cb}_{L}$), tensor-like coupling ($\epsilon^{cb}_{T}$), and scalar-tensor-like coupling ($\epsilon^{cb}_{S_{L}}$). The 68 and 95% quantiles of the limits are represented by the green and yellow bands, respectively.
Summary of exclusion limits (expected and observed) calculated at 95% CL for full Run-2 CMS data.
Background prediction and observed data yields in the signal region bins. The background yields are obtained from the background-only fit and serve as input to the simplified likelihood reinterpretation scheme. The naming of the bins is "year_binnumber", following the binning from Figure 4.
Matrix of covariance coefficients between signal region bins. The coefficients are obtained from the background-only fit and serve as input to the simplified likelihood reinterpretation scheme. The naming of the bins is "year_binnumber", following the binning used in Figure 4.
Predicted signal yields for the 2017 data-taking period, corresponding to 41.3 fb$^{-1}$, after the application of each search requirement (cumulative) for various signal hypothesis. The requirements listed are presented as total efficiencies w.r.t. the previous selection step.
Results of a search for new phenomena in events with an energetic photon and large missing transverse momentum with the ATLAS experiment at the Large Hadron Collider are reported. The data were collected in proton--proton collisions at a centre-of-mass energy of 13 TeV and correspond to an integrated luminosity of 3.2 $\rm fb^{-1}$. The observed data are in agreement with the Standard Model expectations. Exclusion limits are presented in models of new phenomena including pair production of dark matter candidates or large extra spatial dimensions. In a simplified model of dark matter and an axial-vector mediator, the search excludes mediator masses of up to 710 GeV for dark matter candidate masses up to 150 GeV. In an effective theory of dark matter production, values of the suppression scale $M_*$ up to 570 GeV are excluded and the effect of truncation for various coupling values is reported. For the ADD large extra spatial dimension model the search places more stringent limits than earlier searches in the same event topology, excluding $M_{\rm D}$ up to about 2.3 (2.8) TeV for two (six) additional spatial dimensions; the limits are reduced by 20--40% depending on the number of additional spatial dimensions when applying a truncation procedure.
Distribution of missing transverse momentum, reconstructed treating muons as non-interacting particles, in the data and for the background in the 1muCR. The total background expectation is normalized to the post-fit result. Overflows are included in the final bin. The errors include both statistical and systematic uncertainties determined by a bin-by-bin fit.
Distribution of missing transverse momentum, reconstructed treating muons as non-interacting particles, in the data and for the background in the 2muCR. The total background expectation is normalized to the post-fit result. Overflows are included in the final bin. The errors include both statistical and systematic uncertainties determined by a bin-by-bin fit.
Distribution of missing transverse momentum, reconstructed treating electrons as non-interacting particles, in the data and for the background in the 2eleCR. The total background expectation is normalized to the post-fit result. Overflows are included in the final bin. The errors include both statistical and systematic uncertainties determined by a bin-by-bin fit.
Distribution of missing transverse momentum in the data and for the background in the PhJetCR. The total background expectation is normali zed to the post-fit result. The errors include both statistical and systematic uncertainties determined by a bin-by-bin fit.
Distribution of missing transverse momentum in the signal region for data and for the background predicted from the fit in the CRs. Overflows are included in the final bin. The errors include both statistical and systematic components. The expected yield of events from the simplified model with $m_\chi$ = 150 GeV and $m_{med}$ = 500 GeV is also shown.
Distribution of photon transverse momentum in the signal region for data and for the background predicted from the fit in the CRs. Overflows are included in the final bin. The errors include both statistical and systematic components. The expected yield of events from the simplified model with $m_\chi$ = 150 GeV and $m_{med}$ = 500 GeV is also shown.
The observed and 95% CL exclusion limit for a simplified model of dark matter production involving an axial-vector operator, Dirac DM and couplings $g_q$ = 0.25 and $g_\chi$ = 1 as a function of the dark matter mass $m_\chi$ and the axial-mediator mass $m_{med}$.
The observed 90% CL exclusion limit on the DM-proton scattering cross section in a simplifed model of dark matter production involving an axial-vector operator, Dirac DM and couplings $g_q$ = 0.25 and $g_\chi$ = 1 as a function of the dark matter mass $m_\chi$.
The observed 95% CL lower limits on $M_\ast$ for a dimension-7 operator EFT model with a contact interaction of type $\gamma\gamma\chi\chi$ as a function of dark matter mass $m_\chi$.
The observed 95% CL lower limits on the mass scale $M_D$ in the ADD models of large extra dimensions, for several values of the number of extra dimensions.
Four-fermion events have been selected in a data sample of 5.8 pb −1 collected with the aleph detector at centre-of-mass energies of 130 and 136 GeV. The final states ℓ + ℓ − q q , ℓ + ℓ − ℓ + ℓ − , ν ν q q , and ν ν ℓ + ℓ − have been examined. Five events are observed in the data, in agreement with the Standard Model predictions of 6.67±0.38 events from four-fermion processes and 0.14 −0.05 +0.19 from background processes.
The statistical and systematic uncertainties have been combined in quadrature in the background expectations.
A search for physics beyond the Standard Model, in final states with at least one high transverse momentum charged lepton (electron or muon) and two additional high transverse momentum leptons or jets, is performed using 3.2 fb$^{-1}$ of proton--proton collision data recorded by the ATLAS detector at the Large Hadron Collider in 2015 at $\sqrt{s}=13$ TeV. The upper end of the distribution of the scalar sum of the transverse momenta of leptons and jets is sensitive to the production of high-mass objects. No excess of events beyond Standard Model predictions is observed. Exclusion limits are set for models of microscopic black holes with two to six extra dimensions.
Background fit results for regions SR-2TeV ( sumPT > 2 TeV) and SR-3TeV ( sumPT > 3 TeV) for the electron and muons channels. The errors shown are the statistical plus systematic uncertainties. The uncertainty in the total background count includes correlations between nuisance parameters and so does not reflect a quadrature sum of the uncertainties in the individual background components.
The sumPT distribution in the W+jets control region (electron channel). Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the W+jets control region (muon channel). Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the Z+jets control region (electron channel). Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the Z+jets control region (muon channel). Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the ttbar control region (electron channel). Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the ttbar control region (muon channel). Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the electron channel. The selection is that of the signal regions except for the final requirement on sumPT. Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
The sumPT distribution in the muon channel. The selection is that of the signal regions except for the final requirement on sumPT. Expected background yields are given along with the total background uncertainty. The ttbar, W+jets and Z+jets backgrounds are normalised by the factors 0.95, 0.81 and 1.01 as obtained from the background likelihood fit. The single-top-quark and diboson background normalisations are taken from the simulation. The multijet background is obtained using a data-driven method. Additionally, the likelihood fit may constrain nuisance parameters for certain systematic uncertainties, altering the normalisation and shape of some of the distributions.
Expected and observed exclusion contours in the MTH, MD plane for models of rotating black holes with two, four and six extra dimensions simulated with Charybdis2 1.0.4. Masses below the corresponding lines are excluded.
A search for high-mass resonances decaying to $\tau\nu$ using proton-proton collisions at $\sqrt{s}$ = 13 TeV produced by the Large Hadron Collider is presented. Only $\tau$-lepton decays with hadrons in the final state are considered. The data were recorded with the ATLAS detector and correspond to an integrated luminosity of 36.1 fb$^{-1}$. No statistically significant excess above the Standard Model expectation is observed; model-independent upper limits are set on the visible $\tau\nu$ production cross section. Heavy $W^{\prime}$ bosons with masses less than 3.7 TeV in the Sequential Standard Model and masses less than 2.2-3.8 TeV depending on the coupling in the non-universal G(221) model are excluded at the 95% credibility level.
Observed and predicted $m_{\rm T}$ distributions including SSM and NU (cot$\phi$ = 5.5) $W^{\prime}$ signals with masses of 3 TeV. Please note that in the paper figure the bin content is divided by the bin width, but this is not done in the HepData table.
Observed and predicted $m_{\rm T}$ distributions including SSM and NU (cot$\phi$ = 5.5) $W^{\prime}$ signals with masses of 3 TeV. Please note that in the paper figure the bin content is divided by the bin width, but this is not done in the HepData table.
Observed and predicted $m_{\rm T}$ distributions including SSM and NU (cot$\phi$ = 5.5) $W^{\prime}$ signals with masses of 3 TeV. Please note that in the paper figure the bin content is divided by the bin width, but this is not done in the HepData table. The table also contains each background contribution to the Standard Model expectation separately with their statistical uncertainties.
Number of expected Standard Model background events including total statistical and systematic uncertainty added in quadrature (calculated before applying the statistical fitting procedure), number of observed events, and the observed and expected 95% CL upper limits on the visible $\tau\nu$ production cross section, $\sigma_{\rm vis} = \sigma(pp \to \tau\nu +X) \cdot \mathcal{A} \cdot \varepsilon$, for $m_{\rm T}$ thresholds ranging from 250 to 1800 GeV. See HepData abstract for details on how to use this data for reinterpretation.
Number of expected Standard Model background events including total statistical and systematic uncertainty added in quadrature (calculated before applying the statistical fitting procedure), number of observed events, and the observed and expected 95% CL upper limits on the visible $\tau\nu$ production cross section, $\sigma_{\rm vis} = \sigma(pp \to \tau\nu +X) \cdot \mathcal{A} \cdot \varepsilon$, for $m_{\rm T}$ thresholds ranging from 250 to 1800 GeV. See HepData abstract for details on how to use this data for reinterpretation.
Number of expected Standard Model background events including total statistical and systematic uncertainty added in quadrature (calculated before applying the statistical fitting procedure), number of observed events, and the observed and expected 95% CL upper limits on the visible $\tau\nu$ production cross section, $\sigma_{\rm vis} = \sigma(pp \to \tau\nu +X) \cdot \mathcal{A} \cdot \varepsilon$, for $m_{\rm T}$ thresholds ranging from 250 to 1800 GeV. See HepData abstract for details on how to use this data for reinterpretation.
Observed and expected 95% CL upper limits on cross section times $\tau\nu$ branching fraction for $W^{\prime}_{\rm SSM}$.
Observed and expected 95% CL upper limits on cross section times $\tau\nu$ branching fraction for $W^{\prime}_{\rm SSM}$.
Observed and expected 95% CL upper limits on cross section times $\tau\nu$ branching fraction for $W^{\prime}_{\rm SSM}$.
Regions of the non-universal G(221) parameter space excluded at 95% CL.
Regions of the non-universal G(221) parameter space excluded at 95% CL.
Regions of the non-universal G(221) parameter space excluded at 95% CL.
Number of expected $W^{\prime}_{\rm SSM}$, $W^{\prime}_{\rm NU}$, Standard Model background and observed events passing the optimal $m_{\rm T}$ threshold for each considered signal mass hypothesis. The expectations include the total statistical and systematic uncertainty added in quadrature. The yields and uncertainties are calculated before applying the statistical fitting procedure.
Number of expected $W^{\prime}_{\rm SSM}$, $W^{\prime}_{\rm NU}$, Standard Model background and observed events passing the optimal $m_{\rm T}$ threshold for each considered signal mass hypothesis. The expectations include the total statistical and systematic uncertainty added in quadrature. The yields and uncertainties are calculated before applying the statistical fitting procedure.
Number of expected $W^{\prime}_{\rm SSM}$, $W^{\prime}_{\rm NU}$, Standard Model background and observed events passing the optimal $m_{\rm T}$ threshold for each considered signal mass hypothesis. The expectations include the total statistical and systematic uncertainty added in quadrature. The yields and uncertainties are calculated before applying the statistical fitting procedure.
Acceptance for $W^{\prime}_{\rm SSM}$ as a function of the $W^{\prime}_{\rm SSM}$ mass, shown after successively applying selection at generator-level. The acceptance times efficiency is calculated with respect to all $W^{\prime}_{\rm SSM} \to \tau\nu$ events with a generated $\tau\nu$ mass above 120 GeV. The "selected tau" criteria include the requirement of a $\tau_{\rm had-vis}$ with $p_{\rm T}$ > 50 GeV and $|\eta|$ < 2.4. The $m_{\rm T}$ threshold for each $W^{\prime}_{\rm SSM}$ mass is defined in Table 5.
Acceptance for $W^{\prime}_{\rm SSM}$ as a function of the $W^{\prime}_{\rm SSM}$ mass, shown after successively applying selection at generator-level. The acceptance times efficiency is calculated with respect to all $W^{\prime}_{\rm SSM} \to \tau\nu$ events with a generated $\tau\nu$ mass above 120 GeV. The "selected tau" criteria include the requirement of a $\tau_{\rm had-vis}$ with $p_{\rm T}$ > 50 GeV and $|\eta|$ < 2.4. The $m_{\rm T}$ threshold for each $W^{\prime}_{\rm SSM}$ mass is defined in Table 5.
Acceptance for $W^{\prime}_{\rm SSM}$ as a function of the $W^{\prime}_{\rm SSM}$ mass, shown after successively applying selection at generator-level. The acceptance times efficiency is calculated with respect to all $W^{\prime}_{\rm SSM} \to \tau\nu$ events with a generated $\tau\nu$ mass above 120 GeV. The "selected tau" criteria include the requirement of a $\tau_{\rm had-vis}$ with $p_{\rm T}$ > 50 GeV and $|\eta|$ < 2.4. The $m_{\rm T}$ threshold for each $W^{\prime}_{\rm SSM}$ mass is defined in Table 5.
Acceptance times efficiency for $W^{\prime}_{\rm SSM}$ as a function of the $W^{\prime}_{\rm SSM}$ mass, shown after successively applying selection at reconstruction-level. The acceptance times efficiency is calculated with respect to all $W^{\prime}_{\rm SSM} \to \tau\nu$ events with a generated $\tau\nu$ mass above 120 GeV. "Preselection" includes all criteria prior to those shown. The $m_{\rm T}$ threshold for each $W^{\prime}_{\rm SSM}$ mass is defined in Table 5.
Acceptance times efficiency for $W^{\prime}_{\rm SSM}$ as a function of the $W^{\prime}_{\rm SSM}$ mass, shown after successively applying selection at reconstruction-level. The acceptance times efficiency is calculated with respect to all $W^{\prime}_{\rm SSM} \to \tau\nu$ events with a generated $\tau\nu$ mass above 120 GeV. "Preselection" includes all criteria prior to those shown. The $m_{\rm T}$ threshold for each $W^{\prime}_{\rm SSM}$ mass is defined in Table 5.
Acceptance times efficiency for $W^{\prime}_{\rm SSM}$ as a function of the $W^{\prime}_{\rm SSM}$ mass, shown after successively applying selection at reconstruction-level. The acceptance times efficiency is calculated with respect to all $W^{\prime}_{\rm SSM} \to \tau\nu$ events with a generated $\tau\nu$ mass above 120 GeV. "Preselection" includes all criteria prior to those shown. The $m_{\rm T}$ threshold for each $W^{\prime}_{\rm SSM}$ mass is defined in Table 5.
Reconstruction efficiency as a function of $m_{\rm T}$ (see HepData abstract for parameterization), defined as the ratio of the number of $\tau\nu$ events remaining after applying the full selection at reconstruction-level to those remaining after applying the fiducial selection at generator-level. The efficiency is largely model independent, with an uncertainty of ~10% due to model choice.
Reconstruction efficiency as a function of $m_{\rm T}$ (see HepData abstract for parameterization), defined as the ratio of the number of $\tau\nu$ events remaining after applying the full selection at reconstruction-level to those remaining after applying the fiducial selection at generator-level. The efficiency is largely model independent, with an uncertainty of ~10% due to model choice.
Reconstruction efficiency as a function of $m_{\rm T}$ (see HepData abstract for parameterization), defined as the ratio of the number of $\tau\nu$ events remaining after applying the full selection at reconstruction-level to those remaining after applying the fiducial selection at generator-level. The efficiency is largely model independent, with an uncertainty of ~10% due to model choice.
A search for pair production of a scalar partner of the top quark in events with four or more jets plus missing transverse momentum is presented. An analysis of 36.1 fb$^{-1}$ of $\sqrt{s}$=13 TeV proton-proton collisions collected using the ATLAS detector at the LHC yields no significant excess over the expected Standard Model background. To interpret the results a simplified supersymmetric model is used where the top squark is assumed to decay via $\tilde{t}_1 \rightarrow t^{(*)} \tilde\chi^0_1$ and $\tilde{t}_1\rightarrow b\tilde\chi^\pm_1 \rightarrow b W^{(*)} \tilde\chi^0_1$, where $\tilde\chi^0_1$ ($\chi^\pm_1$) denotes the lightest neutralino (chargino). Exclusion limits are placed in terms of the top-squark and neutralino masses. Assuming a branching ratio of 100% to $t \tilde\chi^0_1$, top-squark masses in the range 450-950 GeV are excluded for $\tilde\chi^0_1$ masses below 160 GeV. In the case where $m_{\tilde{t}_1}\sim m_t+m_{\tilde\chi^0_1}$, top-squark masses in the range 235-590 GeV are excluded.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $E_\text{T}^\text{miss}$ for SRA-TT after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T2}^{\chi^2}$ for SRA-T0 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRB-TW after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $R_\text{ISR}$ for SRC1-5 after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $m_\text{T}^{b,\text{max}}$ for SRD-high after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Distribution of $H_\text{T}$ for SRE after the likelihood fit. The stacked histograms show the SM expectation and the hatched uncertainty band around the SM expectation shows the MC statistical and detector-related systematic uncertainties. A representative signal point is shown for each distribution.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected (blue solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Observed (red solid line) exclusion limits at 95% CL as a function of stop and LSP masses in the scenario where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses and branching fraction to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ in the Natural SUSY-inspired mixed grid scenario where $m_{\tilde{\chi^{\pm}_{1}}}=m_{\tilde{\chi^{0}_{1}}}$+1 GeV.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a large tan$\beta$ assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Observed exclusion limits at 95% CL as a function of $m_{\tilde{t}}$ and $m_{\tilde{\chi^{0}_{1}}}$ for the pMSSM-inspired non-asymptotic Higgsino simplified model for a small right-handed top-squark mass parameter assumption.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a negative value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for the Wino NLSP pMSSM model for a positive value of $\mu$.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the left-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Observed exclusion limits at 95% CL as a function of $\tilde{t}$ and $\tilde{\chi^{0}_{1}}$ masses for for the right-handed top-squark mass parameter scan in the well-tempered pMSSM model.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Expected exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Observed exclusion limits at 95% CL exclusion as a function of $\tilde{g}$ and $\tilde{t}$ masses in the scenario where both gluinos decay via $\tilde{g}\to t \tilde{t}\to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ from the combination of SRA, SRB, SRC, SRD and SRE, based on the best expected $CL_s$. The numbers centered on the grid points indicate which of the signal regions gave the best expected $CL_s$ (with 1, 2, 3, 4, 5, 6 corresponding to SRA, SRB, SRC, SRD-low,SR D-high, SRE respectively).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 25%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 50%. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the grid with two stop decay channels: $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV. The results are shown as a function of the branching ratio to $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$: 0 (top left), 25% (top right), 50% (middle left), 75% middle right) and 100% (bottom). The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRC, SRD-low and SRD-high, The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high, 5: SRC).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for negative values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the wino NLSP grid for positive values of $\mu$. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{q3L}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the well-tempered neutralino grid for the $m_{tR}$ scenario. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 4: SRD-low, 5: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with large tan$\beta$ (top left) is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenarios with small tan$\beta$ are shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Results of the exclusion fits in the non-asymptotic higgsino grid with $m(\tilde{\chi^{\pm}_{1}}) - m(\tilde{\chi^{0}_{1}}) = 5$ GeV. A scenario with a mostly right-handed top squark partner is shown. The results are based on taking the signal region with the best expected $CL_s$, using SRA, SRB, SRD-low and SRD-high, where SRA and SRB are the statistical combinations of their respective regions. The numbers centered on the grid points indicate the signal region used (1: SRA, 2: SRB, 3: SRD-low, 4: SRD-high).
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Acceptance for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TT for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRE for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-TW for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRA-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRB-T0 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC1 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC2 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC3 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC4 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRC5 for top squark pair production in the case where both top squarks decay via $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-low for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRD-high for the natural SUSY-inspired mixed grid in which two decay modes are considered, the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ and $\tilde{t}\to b \tilde{\chi^{\pm}_{1}} \to b W^{(*)} \tilde{\chi^{0}_{1}}$, with $m(\tilde{\chi^{\pm}_{1}})-m(\tilde{\chi^{0}_{1}}) = 1$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Efficiencies for SRE for gluino pair production in the case where both gluinos decay via $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft and $\Delta m(\tilde{t},\tilde{\chi^{0}_{1}})=5$ GeV.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{t}\to t^{(*)} \tilde{\chi^{0}_{1}}$ grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Upper limit cross-section, in femtobarn, for the $\tilde{g}\to t \tilde{t} \to t\tilde{\chi^{0}_{1}}+$soft grid.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRA for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (800,1) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow SRB for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (600,300) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC1 and SRC2 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (250,77) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRC3, SRC4, and SRC5 for a signal model with top squark pair production in the case where both top squarks decay via $\tilde{t}_1\to t^{(*)} \tilde\chi^0_1$ with $m(\tilde{t}_1,\tilde\chi^0_1)=$ (500,327) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{t}_1,\tilde\chi^{\pm}_1)=$ (800,100) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (800,100) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-high for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV with $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (750,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{t}_1,\tilde\chi^{\pm}_1)=$ (600,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (600,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRD-low for a signal model with bottom squark pair production in the case where both bottom squarks decay via $b\tilde\chi^{\pm}_1\to bW^{(*)} \tilde\chi^0_1$, with $m(\tilde\chi^{\pm}_1)-m(\tilde\chi^0_1) = 1$ GeV witht $m(\tilde{b}_1,\tilde\chi^{\pm}_1)=$ (400,200) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
Cutflow for SRE for a signal model with gluino pair production in the case where both gluinos decay via $\tilde{g}\to t\tilde{t}_1\to t\tilde\chi^0_1+$soft and $\Delta m(\tilde{t}_1, \tilde\chi^0_1)=5$ GeV with $m(\tilde{g},\tilde{t}_1)=$ (1700,400) GeV. An integrated luminosity of 36.1 $\mathrm{fb}^{-1}$ is assumed when calculating the weighted yields. For the derivation skim at least one of the following four criteria is required: $H_{\mathrm{T}}$ $>$ 150 GeV; at least one loose electron with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two loose electrons with $p_{\mathrm{T}}$ $>$ 20 GeV; at least one muon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two muons with $p_{\mathrm{T}}$ $>$ 20 GeV; or at least one photon with $p_{\mathrm{T}}$ $>$ 100 GeV or at least two photons with $p_{\mathrm{T}}$ $>$ 50 GeV.
When you search on a word, e.g. 'collisions', we will automatically search across everything we store about a record. But, sometimes you may wish to be more specific. Here we show you how.
Guidance and examples on the query string syntax can be found in the Elasticsearch documentation.
About HEPData Submitting to HEPData HEPData File Formats HEPData Coordinators HEPData Terms of Use HEPData Cookie Policy
Status
Email
Forum
Twitter
GitHub
Copyright ~1975-Present, HEPData | Powered by Invenio, funded by STFC, hosted and originally developed at CERN, supported and further developed at IPPP Durham.